Flame Detectors Hazardous Applications Intelligent Flame Detectors
Total Page:16
File Type:pdf, Size:1020Kb
Flame Detectors Hazardous Applications Intelligent Flame Detectors UV Only UV/IR Multi-Spectrum IR Flame Detector Flame Detector Flame Detector Model F110 Model F120 Model F130 The SST Model F110 Ultraviolet The SST Model F120 UV/IR Flame The SST Model F130 Multi- Flame Detector detects flames by Detector is a sophisticated, self- Spectrum IR Flame Detector is a sensing the ultraviolet (UV) radiation contained, optical flame detection high performance and high reliability produced during a combustion system for indoor or outdoor self-contained multi-spectrum IR process. This traditional method applications. It detects flames by flame detector designed for indoor of detection is effective inside sensing the ultraviolet (UV) and and outdoor hazardous applications. buildings and enclosures where the infrared (IR) radiation produced by The flame detector’s latest state- detector is isolated from sources of a flame. of-the-art processor and circuitry false alarms such as lightning and • Not blinded by dense smoke are housed in an aluminum powder arc welding. coated explosion-proof enclosure • The outputs are either voted and provides superior false alarm • Provides rapid detection of automatically, or can be immunity and the highest level flames manually selected by the of flame sensitivity as well as the • Uses UV sensor that is sun customer optimal rejection of false alarms. blind • Selected outputs can either • Adjustable sensor sensitivity be for UV only, IR only, • Multi-spectrum design with high • Automatic optical self-test Temperature, or any two out false alarm immunity and fire of three combination. This sensitivity • Relay contacts for control or “voting” capability is what sets shutdown of external equipment • Long detection range this detector apart from any • 24 volt DC nominal operating other UV/IR flame detector. • Automatic optical self-test voltage • Automatic optical self-test • Relay contacts for control or • Available time delay settings shutdown of external equipment • High current relays for control • 5 Year Warranty or shutdown of external • 24 volt DC nominal operating voltage • Made in the USA equipment • 24 volt DC nominal operating • 5 Year Warranty voltage • Made in the USA • Available time delay settings • 5 Year Warranty • Made in the USA Standard Features HOUSING ADJUSTABLE POWER SUPPLY All of SST’s flame detector models SETTINGS The flame detectors operate using are self-contained in a two-piece Each flame detector models 24 volt DC nominal operating explosion proof copper-free responds to a flame with a variety voltage. aluminum housing. It is suitable of sensitivity and time delay for use in “classified” areas scenarios. A multiposition jumper WARRANTY AND where ignitable concentrations of plug sets the detector for the most ORIGIN flammable gas normally exist. Also appropriate mode, such as quickest All Safety Systems Technology available in stainless steel housing. response, or specifically tuned Flame Detectors come with our to the exact conditions at your standard 5 years warranty and are ALARM SETTINGS particular installation. designed, engineered, and Made in Each electronics includes three (3) the USA. dry contact relays, two for alarm AUTOMATIC SELF-TEST and one for fault, and a 0 to 20 mA Periodically, each flame detector AVAILABLE current output. Alarm and status runs the Automatic Self-Test routine ACCESSORIES conditions may be transmitted by and tests the outside surface of Available accessories include the detector to a central control the viewiing window as well as the mounting brakets, sun shield, room over a single wire using the sensor and electronics to ensure it portable flame detector test 0 to 20 mA current loop. Alarm is functioning properly. Should the equipment, and power supplies. and status indications may also be self-test of the window be degraded, transmitted remotely using relay or other circuit malfunctions For other features and technical contacts. detected, a Malfunction (relay and data, please visit our website at current loop) will be signaled and www.safetysys.com the yellow fault LED will illuminate. Engineered for Quality and Reliability www.safetysys.com Headquarters 23282 Mill Creek Drive Suite 215 Laguna Hills, CA 92653 USA +1.949.583.1857 Phone +1.949.340.6643 Fax [email protected] E-mail www.safetysys.com Web FLAME.01.