Surface-Mounted Toilet Tissue Cabinet Shall Be Type-304 Stainless Steel with Satin Finish

Total Page：16

File Type：pdf, Size：1020Kb

Surface-Mounted Toilet Tissue Cabinet Shall Be Type-304 Stainless Steel with Satin Finish

SURFACE-MOUNTED TOILET TISSUE B-272 Technical Data CABINET 3-1/4'' Finish Face of Wall 65mm 7/8'' Lock & Key 22mm S 6'' 150mm 8-15/16'' 225mm 28'' 710mm S Recommended Mounting Height Off Floor 5'' 3'' 125mm 75mm MATERIALS: Cabinet — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Equipped with a tumbler lock keyed like other Bobrick washroom accessories. OPERATION: Unit dispenses either single- or doublefold toilet tissue. Large capacity accommodates 1330 singlefold toilet tissues and can be refilled with a full standard pack before dispenser is empty. Slots in cabinet indicate refill time. INSTALLATION: Mount unit on wall or partition with four #8 x 3/4" (4.5 x 19mm) sheet-metal screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws or provide 1/8" (3mm) toggle bolts or expansion bolts. SPECIFICATION: Surface-mounted toilet tissue cabinet shall be type-304 stainless steel with satin finish. Unit shall dispense either single- or doublefold toilet tissue and be equipped with a tumbler lock keyed like other Bobrick washroom accessories. Surface-Mounted Toilet Tissue Cabinet shall be Model B-272 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom. The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/30/15 Printed in U.S.A. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc..

Copy Link

Recommended publications

Single Family Housing Design Standards
TEXAS GENERAL LAND OFFICE COMMUNITY DEVELOPMENT AND REVITALIZATION HOUSING DESIGN STANDARDS (SINGLE FAMILY) Revised July 21, 2020 TEXAS GENERAL LAND OFFICE COMMUNITY DEVELOPMENT AND REVITALIZATION DIVISION GLO-CDR HOUSING DESIGN STANDARDS (SINGLE FAMILY) The purpose of the Texas General Land Office Community Development and Revitalization division’s (GLO-CDR) Housing Design Standards (the Standards) is to ensure that all applicants (single family housing applicants) who receive new or rehabilitated construction housing through programs funded through GLO-CDR live in housing which is safe, sanitary, and affordable. Furthermore, these Standards shall ensure that the investment of public and homeowner funds results in lengthening the term of affordability and the preservation of habitability. All work carried out with the assistance of funds provided through GLO-CDR shall be done in accordance with these Standards and the GLO-CDR Housing Construction Specifications as they apply to single family housing applicants and, unless otherwise defined, shall meet or exceed industry and trade standards. Codes, laws, ordinances, rules, regulations, or orders of any public authority in conflict with installation, inspection, and testing take precedence over these Standards. A subrecipient can request a variance for any part of these Standards for a specific project by submitting a written request to GLO-CDR detailing the project location, the need for the variance, and, if required, the proposed alternative. Variance requests can be submitted to: Martin Rivera Jerry Rahm Monitoring & QA Deputy Director Housing Quality Assurance Manager Community Development and Community Development and Revitalization Revitalization Texas General Land Office Texas General Land Office Office 512-475-5000 Office 512-475-5033 [email protected] [email protected] 1700 North Congress Avenue, Austin, Texas 78701-1495 P.O.
[Show full text]
Residential Bathroom Remodel Based on the 2016 California Residential, Electrical, Plumbing and Mechanical Code
BUILDING & SAFETY DIVISION │ PLANS AND PERMITS DIVISION DEVELOPMENT SERVICES CENTER 39550 LIBERTY STREET, FREMONT, CA 94538 P: 510.494.4460 │ EMAIL: [email protected] WWW.FREMONT.GOV SUBMITTAL AND CODE REQUIREMENTS FOR AN RESIDENTIAL BATHROOM REMODEL BASED ON THE 2016 CALIFORNIA RESIDENTIAL, ELECTRICAL, PLUMBING AND MECHANICAL CODE PERMIT INFORMATION: A permit is required for bathroom remodels that include the replacement of the tub/shower enclosure, relocation of plumbing fixtures or cabinets, or if additional plumbing fixtures will be installed. A permit is not required for replacement of plumbing fixtures (sink or toilet) in the same location. Plans shall be required if walls are removed, added, altered, and/or if any fixtures are removed, added or relocated. All requirements shall in conformance to the currently adopted codes. THINGS TO KNOW: □ A Building Permit may be issued only to a State of California Licensed Contractor or the Homeowner. If the Homeowner hires workers, State Law requires the Homeowner to obtain Worker’s Compensation Insurance. □ When a permit is required for an alteration, repair or addition exceeding one thousand dollars ($1,000.00) to an existing dwelling unit that has an attached garage or fuel-burning appliance, the dwelling unit shall be provided with a Smoke Alarm and Carbon Monoxide Alarm in accordance with the currently adopted code. □ WATER EFFICIENT PLUMBING FIXTURES (CALIFORNIA CIVIL CODE 1101.4(A)): The California Civil Code requires that all existing non-compliant plumbing fixtures (based on water efficiency) throughout the house be upgraded whenever a building permit is issued for remodeling of a residence. Residential building constructed after January 1, 1994 are exempt from this requirement.
[Show full text]
SOHO Design in the Near Future
Rochester Institute of Technology RIT Scholar Works Theses 12-2005 SOHO design in the near future SooJung Lee Follow this and additional works at: https://scholarworks.rit.edu/theses Recommended Citation Lee, SooJung, "SOHO design in the near future" (2005). Thesis. Rochester Institute of Technology. Accessed from This Thesis is brought to you for free and open access by RIT Scholar Works. It has been accepted for inclusion in Theses by an authorized administrator of RIT Scholar Works. For more information, please contact [email protected]. Rochester Institute of Technology A thesis Submitted to the Faculty of The College of Imaging Arts and Sciences In Candidacy for the Degree of Master of Fine Arts SOHO Design in the near future By SooJung Lee Dec. 2005 Approvals Chief Advisor: David Morgan David Morgan Date Associate Advisor: Nancy Chwiecko Nancy Chwiecko Date S z/ -tJ.b Associate Advisor: Stan Rickel Stan Rickel School Chairperson: Patti Lachance Patti Lachance Date 3 -..,2,2' Ob I, SooJung Lee, hereby grant permission to the Wallace Memorial Library of RIT to reproduce my thesis in whole or in part. Any reproduction will not be for commercial use or profit. Signature SooJung Lee Date __3....:....V_6-'-/_o_6 ____ _ Special thanks to Prof. David Morgan, Prof. Stan Rickel and Prof. Nancy Chwiecko - my amazing professors who always trust and encourage me sincerity but sometimes make me confused or surprised for leading me into better way for three years. Prof. Chan hong Min and Prof. Kwanbae Kim - who introduced me about the attractive
[Show full text]
3505.18: Garages A. Size Limits
3505.18: Garages A. Size Limits: The maximum size for a garage associated with a single-family dwelling shall be as follows: 1. BC Zoning District: Total floor area of garages (and all other accessory structures) in the BC zoning District shall not exceed 600 square feet. 2. All Other Zoning Districts: 1,500 sq. ft. of floor area in a single-family dwelling that contains up to 3,000 square feet of floor area. For single-family dwellings that contain more than 3,000 square feet, maximum garage size is a function of the floor area contained in the dwelling, with the maximum garage size allowed at 50% of the floor area contained in the dwelling up to a maximum of 2,000 square feet of in garage floor area. 3. There shall be no size limit for a garage on a parcel greater than 35 acres located within the A-1 Zoning District. B. Location: Except as provided in the RC-5000 and RC-40000 zoning districts, a garage associated with a residential use must be located on the same parcel as the residential use. The garage may be either attached to or detached from the primary residential structure. Both attached and detached garages are allowed on the same parcel provided the size of both garages combined does not exceed the maximum size limit as stated above. C. Exceptions to Size Limits: Areas which are located within the garage area of a dwelling or the garage structure, but are separated from the actual parking areas, such as but not limited to workshop areas or rooms, storage areas and utility areas, shall not be counted in the size of the garage if such areas are designed as one of the following areas: 1.
[Show full text]
RS-15- Common Residential Codes
Full Service Center East Area Service Center 827 7th Street, Room 102 5229 Hazel Avenue, Suite B Sacramento, CA 95814 Fair Oaks, CA 95628 M-F 8:30am - 4:30pm M-Tu. 9:00am - 4:00pm Building Permits & Inspection Division Bradshaw Center North Area Service Center 9700 Goethe Road, Suite A 3331 Peacekeeper Wy, Suite 100 General Information: (916) 875-5296 Sacramento, CA 95827 McClellan, CA 95652 www.building.saccounty.net M-F 8:30am - 4:30pm W-Th. 9:00am - 4:00pm COMMON RESIDENTIAL CODES Project Description Date Case No. These sheets, when attached to a set of plans, become part of those plans and must remain attached thereto. The approval of this plan and the specifications shall not be held to permit or approve the violation of any County ordinance or State or Federal law. Sacramento County currently enforces the 2016 California Building Code (CBC), 2016 California Residential Code (CRC), 2016 California Mechanical Code (CMC), 2016 California Electrical Code (CEC), 2016 California Plumbing Code (CPC), 2016 California Fire Code (CFC), 2016 California Energy Commission Standards (CESC) and the current California Health and Safety Codes as well as Sacramento County locally adopted amendments to such codes. I have read and will comply with the items in this document and as marked on the plans. I am aware that the text and code sections referenced in this form may be appealed as per SCC 105. Date Signature of: Owner Authorized Agent Contractor Architect/Engineer BUILDING CODE REQUIREMENTS Section R301 Design Criteria B-1 R301.1.1 Alternative provisions. Conventional Light-Frame Construction complying with the AF&PA (WFCM) is an acceptable alternative to this CRC provision, when addressing prescriptive framing requirements.
[Show full text]
ADA Design Guide Washrooms & Showers
ADA Design Guide Washrooms & Showers Accessories Faucets Showers Toilets Lavatories Interactive version available at bradleycorp.com/ADAguide.pdf Accessible Stall Design There are many dimensions to consider when designing an accessible bathroom stall. Distances should allow for common usage by people with a limited range of motion. A Dimension guidelines when dispensers protrude from the wall in toilet rooms and 36" max A toilet compartments. 915 mm Anything that a person might need to reach 24" min should be a maximum of 48" (1220 mm) off of 610 mm the finished floor. Toilet tissue needs to be easily within arm’s 12" min reach. The outlet of a tissue dispenser must 305 mm be between 24" (610 mm) minimum and 42" (1070 mm) maximum from the back wall, and per the ANSI standard, at least 24" min 48" max 18" above the finished floor. The ADA guide 610 mm 1220 mm defines “easily with arm’s reach” as being within 7-9" (180–230 mm) from the front of 42" max the bowl and at least 15" (380 mm) above 1070 mm the finished floor (48" (1220 mm) maximum). Door latches or other operable parts cannot 7"–9" 18" min 180–230 mm require tight grasping, pinching, or twisting of 455 mm the wrist. They must be operable with one hand, using less than five pounds of pressure. CL Dimensions for grab bars. B B 39"–41" Grab Bars need to be mounted lower for 990–1040 mm better leverage (33-36" (840–915 mm) high). 54" min 1370 mm 18" min Horizontal side wall grab bars need to be 12" max 455 mm 42" (1065 mm) minimum length.
[Show full text]
City of Pasadena Residential Bathroom Remodel
CITY OF PASADENA BUILDING AND SAFETY DIVISION 175 North Garfield Avenue, Pasadena, CA 91101-1704 (626) 744-4200 Fax: (626) 744-3979 www.cityofpasadena.net RESIDENTIAL BATHROOM REMODEL A permit is required for bathroom remodels that include the removal & replacement and/or relocation of vanity cabinets, toilets, sink, tubs/showers, replacement/alteration to the electrical, or removal & replacement of the wallboard. A permit is not required for replacement of the towel bars, mirrors, paint, and floor covers where no other work is included because they are considered to be maintenance items. If a permit is required, it must be obtained prior to the start of the remodel. This handout is for information & reference only, and is not a substitute for plans prepared for each project. The following is a list of the general requirements based on the 2019 California Residential Code (CRC), 2019 California Mechanical Code (CMC), 2019 California Electrical Code (CEC), 2019 California Plumbing Code (CPC), 2019 California Energy Code (CEnC), 2019 California Green Building Standards Code (CalGreen), and the California Civil Code. Contact the Building & Safety Division for any questions or additional information, including requirements for new/altered plumbing (water, sewer, or gas lines) or mechanical (bathroom exhaust fan). Safety Glazing (i.e., tempered) Windows in Bathrooms [CRC 308.4.5] • Windows in any portion of a wall enclosing tubs and/or showers where the bottom edge of the glazing is less than 60” above the standing surface. • Windows within 60” measured horizontally from water’s edge of a bathtub or whirlpool tub or from edge of a shower and where the bottom edge of the glazing is less than 60” above the walking surface.
[Show full text]
Accessibility Guide for Small Businesses
. Accessibility Guide for Small Businesses June 2015 Second Edition Preface This document is intended to provide explanation and technical guidance to assist owners of small businesses of the accessibility regulations of the State of California as applied to places of businesses. Under the current governing regulations, places of businesses are considered public accommodations and commercial buildings. It is not the intent of this guideline to provide any advice on the application of the building code regulations to any specific conditions or project by text or illustrations. The pictures provided in this guideline are shown to illustrate and explain a specific code requirement. It is highly recommended the actual governing code and regulations be consulted for accessibility requirements applicable to any specific conditions or projects. The user of this guideline is hereby advised to consult with a California licensed architect or a California Certified Access Specialist (CASp) for evaluation and application of accessibility regulations to any project under consideration ii Table of Contents 1. INTRODUCTION ................................................................................................................1 2. DEFINITIONS .....................................................................................................................2 2.1. Accessibility ......................................................................................................................... 2 2.2 Accessible Route .................................................................................................................
[Show full text]
Requirements for Covered Multifamily Dwellings Under the Fair Housing Act
U.S. DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT OFFICE OF FAIR HOUSING AND EQUAL OPPORTUNITY U.S. DEPARTMENT OF JUSTICE CIVIL RIGHTS DIVISION Washington, D.C. April 30, 2013 JOINT STATEMENT OF THE DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT AND THE DEPARTMENT OF JUSTICE ACCESSIBILITY (DESIGN AND CONSTRUCTION) REQUIREMENTS FOR COVERED MULTIFAMILY DWELLINGS UNDER THE FAIR HOUSING ACT Introduction The Department of Justice (“DOJ”) and the Department of Housing and Urban Development (“HUD”) are jointly responsible for enforcing the federal Fair Housing Act (the “Act”),1 which prohibits discrimination in housing on the basis of race, color, religion, sex, national origin, familial status, and disability.2 One of the types of disability discrimination prohibited by the Act is the failure to design and construct covered multifamily dwellings with certain features of accessible design. See 42 U.S.C. § 3604(f). This Joint Statement provides guidance regarding the persons, entities, and types of housing and related facilities that are subject to the accessible design and construction requirements of the Act (hereinafter, “design and construction requirements”). See 42 U.S.C. § 3604(f)(3). 1The Fair Housing Act is codified at 42 U.S.C. §§ 3601-3619. 2The Act uses the term “handicap” instead of “disability.” Both terms have the same legal meaning. See Bragdon v. Abbott, 524 U.S. 624, 631 (1998) (noting that definition of “disability” in the Americans with Disabilities Act is drawn almost verbatim “from the definition of ‘handicap’ contained in the Fair Housing Amendments Act of 1988”). This document uses the term “disability,” which is more generally accepted.
[Show full text]
Water Is Life.. As the Fourth Most Water-Impoverished Country in the World, Jordan Has Stood Face-To-Face with Water Shortages for More Than Two Decades
Water is Life.. As the fourth most water-impoverished country in the world, Jordan has stood face-to-face with water shortages for more than two decades. The annual amount of water availability per capita is less than one-third of the international water- poverty line. Global climate change may lead to greater strain on already limited resources. This ongoing water shortage has caused a drastic over-pumping of groundwater aquifers that has resulted in a major decrease of available water. On the other hand, Jordan’s stability, tourism attraction, and the quality of its business and health services make it as a Forward prime regional hub for investment. This challenging situation provides a great opportunity for Jordan to efficiently use each drop of its water. The government of Jordan began taking steps since late 1980s to improve water management through policies, regulations, institutional reforms, and the use of new technologies. Water- use efficiency programs were launched afterwards to promote water conservation in the agricultural sector which uses more than 60 percent of the national water resources. In early 2000, the Kingdom embarked on a nationwide program to introduce urban water-use efficiency to the public and create a culture of water conservation for all parts of society. This was followed in 2007 by an institutional program that developed a water- demand management policy for the urban and agricultural sectors, and established the institutional model for urban water demand management at the Ministry of Water and Irrigation, the water utilities, and relevant public and private institutions. The program produced a set of water saving standards and a plumbing code for water-use efficiency.
[Show full text]
Arches National Park A
North h as W E w t AG lo Ca 0 1 2 3 4 Kilometers L l E Ye PA 0 1 2 3 4 Miles R K YELLOW CAT FLAT MOLLIE h as HOGANS W CAUTION W Stay on trails or slickrock to A d R o protect fragile cryptobiotic soil o D w n crust. These tiny organisms are o t E t critical to all life in the desert. N o I C M Soft sand. Stay on designated roads. CA FIN NY ON DE VILS Private N O Dark Angel Arch GA Y RD N Double O Arch E primitive A C N trail 1.3mi KLONDIKE 2.1km G Navajo Arch N BLUFFS I Partition Arch R Tower Arch P Sal S Pit toilet Landscape Arch t Pine Tree Arch L Tunnel Arch CANY IT ON T T R S L Marching 1.7mi Pit toilet E E V O W 2.7km O L Men Devils Garden Trailhead L V C a A s L 1.4mi h L E 2.3km Campground E Y G S D a RI lt Skyline Arch P Amphitheater M 1.0mi A C V 1.6km h S Broken Arch R s a A E a ll T e L IN W y T W W Sand Dune Arch a p s m h 7.7mi a C 12.4km V r A te L in L W E Y 5.0mi FIERY 8.1km FURNACE Pit toilet Delicate Arch DOME Fiery Furnace Viewpoint 4829ft 9.0mi PLATEAU 14.5km Salt Valley Overlook 1474m Parking and To 70 and Crescent Junction Because of soft sand on Wolfe Ranch Pit toilet steep grades, vehicular travel Pit toilet 1.0mi Delicate Arch Viewpoint from junction of191 and313 : alt is recommended only from S Valley sh 1.6km 18mi 29km Wa ache north to south through this C C area.
[Show full text]
2010 ADA Standards for Accessible Design
2010 ADA Standards for Accessible Design Department of Justice September 15, 2010 Reproduction of this document is encouraged. This publication may be viewed or downloaded from the ADA website (www.ADA.gov). Additional copies may be obtained by calling the ADA Information Line: 800-514-0301 (voice) 800-514-0383 (TTY) September 15, 2010 i Department of Justice Contents 1 Introduction...………………………………….............1 2010 Standards for State and 2 Local Government Facilities: Title II.…...………....3 2010 Standards for Public Accommodations 3 and Commercial Facilities: Title III……................15 2010 Standards for Titles II 4 and III Facilities: 2004 ADAAG..…...........……...... 31 Department of Justice ii iii Department of Justice Overview The Department of Justice published revised regulations for Titles II and III of the Americans with Disabilities Act of 1990 "ADA" in the Federal Register on September 15, 2010. These regulations adopted revised, enforceable accessibility standards called the 2010 ADA Standards for Accessible Design "2010 Standards" or "Standards". The 2010 Standards set minimum requirements – both scoping and technical – for newly designed and constructed or altered State and local government facilities, public accommodations, and commercial facilities to be readily accessible to and usable by individuals with disabilities. Adoption of the 2010 Standards also establishes a revised reference point for Title II entities that choose to make structural changes to existing facilities to meet their program accessibility requirements;
[Show full text]