DOCSLIB.ORG

Ethylene-Acrylic Acid Copolymer Product Stewardship Summary February 2011

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Ethylene-Acrylic Acid Copolymer Product Stewardship Summary February 2011 Ethylene-Acrylic Acid Copolymer Product Stewardship Summary February 2011 (C3H4O2·C2H4)X Chemical Name: Ethylene-acrylic acid copolymer Chemical Category (if applicable): Copolymer Synonyms: 2-Propenoic acid, polymer with ethene; Acrylic acid copolymer with ethylene; Acrylic acid, polymer with ethylene; Acrylic acid-ethene copolymer; Acrylic acid-ethylene copolymer ; Acrylic acid-ethylene polymer; Acrylic acid- polyethylene polymer CAS Number: 9010-77-9 CAS Name: 2-Propenoic acid, polymer with ethene EC (EINECS) Number: None Document Number: GPS0047 V1.0 Ethylene-acrylic acid copolymers are used in the production of heat-seal coatings, extrusion or laminate coatings in the plastic industry, metal coatings for metallic products, paper coatings in the paper industry, and back adhesives for tufted carpets and fusible interlinings of garments in the textile industry. Workplace exposures to vapors or fumes during the manufacture of ethylene-acrylic acid copolymer are expected to be minimal because local exhaust ventilation is used at thermal processing emission points. Local exhaust ventilation also prevents worker exposure at secondary operations (cutting, regrinding, chopping, etc.) that follow thermal processing. Good manufacturing practices and industrial hygiene practices are implemented to prevent or reduce exposure to ethylene-acrylic acid copolymer. Worksite safety programs follow recommended exposure guidelines for total dust and respirable fractions of dusts of ethylene- acrylic acid copolymer (Particulates Not Otherwise Regulated) and for residual acrylic acid. Please see the MSDS for additional information. Ethylene-acrylic acid copolymer is an insoluble white, wax-like solid in pellet, prill or powder form. Ethylene-acrylic acid copolymer pellets, prills or dusts in contact with skin may cause mechanical irritation. Hot or molten polymer can burn the skin and thermal processing fumes/vapors may irritate the eyes. Thermal processing fumes/vapors or dusts may also irritate the mucous membranes of the nose and throat. There are no known or documented chronic (long-term) effects or reproductive/developmental effects associated with ethylene-acrylic acid copolymers. This product stewardship summary is intended to give general information about the chemical or categories of chemicals addressed. It is not intended to provide an in-depth discussion of all health and safety information. Additional information on the chemical is available through the applicable Material Safety Data Sheet which should be consulted before use of the chemical. The product stewardship summary does not supplant or replace required regulatory and/or legal communication documents. Statements concerning use of our products are made without warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The cancer risk for ethylene-acrylic acid copolymer is extremely low. Although ethylene-acrylic acid copolymers are not readily biodegradable, they are unlikely to impact the aquatic environment because they are insoluble in water. Their physical impact on the environment is considered negligible. Please contact us for more information. Version 1.0 Current Issue Date: February 2011 Document Number: DOC NAME GPS0047 Page 2 of 2 Page 2 of 2 .
Load more

Recommended publications
  • Rheology Modification of Hydrogen Peroxide-Based Applications Using
    Rheology Modification of Hydrogen Peroxide-Based Applications Using Cross-Linked Polyacrylic Acid Polymers* Julie Schmucker-Castner and Dilip Desai The BFGoodrich Company 1. Key Words: Hydrogen Peroxide, Hair Bleach, Two-Part Hair Color, Rheology Modification, Thickened Hydrogen Peroxide, Hydrogen Peroxide Gels, Hydrogen Peroxide Stability, Cross-Linked Polyacrylic Acid, Carbomer, Acrylates / C10-30 Alkyl Acrylate Crosspolymer 2. Summary: A fundamental study of the stability of hydrogen peroxide-based gels, thickened using cross-linked polyacrylic acid polymers, will be presented. Recent systematic experiments will demonstrate that excellent long-term stability of such gels can be achieved. The study evaluates different types of cross- linked polyacrylic acid polymers (as well as an associative acrylic polymer), several commercial sources of hydrogen peroxide, hydrogen peroxide concentrations and the effect of pH. Resulting viscosities from combinations of these variables will be presented, as well as the effects of accelerated aging on percent active peroxide and viscosity of the thickened peroxide gels. The results of this study will enable the formulator to determine the appropriate polymer and conditions necessary for optimal stability and rheological properties for hydrogen peroxide applications. This study will demonstrate that some cross-linked polyacrylic acid polymers are very compatible and stable with H2O2 and that these polymers do not affect the H2O2 stability under certain conditions. In addition, this study will show that certain cross-linked polyacrylic acid polymers can produce very viscous gels and yield higher viscosities in typical permanent hair color formulas compared to many commercially available products. Because of the excellent compatibility and stability demonstrated, cross-linked acrylic acid polymers are ideal rheological modifiers for hydrogen peroxide-based applications.
    [Show full text]
  • Green Chemistry Accepted Manuscript
    Green Chemistry Accepted Manuscript This is an Accepted Manuscript, which has been through the Royal Society of Chemistry peer review process and has been accepted for publication. Accepted Manuscripts are published online shortly after acceptance, before technical editing, formatting and proof reading. Using this free service, authors can make their results available to the community, in citable form, before we publish the edited article. We will replace this Accepted Manuscript with the edited and formatted Advance Article as soon as it is available. You can find more information about Accepted Manuscripts in the Information for Authors. Please note that technical editing may introduce minor changes to the text and/or graphics, which may alter content. The journal’s standard Terms & Conditions and the Ethical guidelines still apply. In no event shall the Royal Society of Chemistry be held responsible for any errors or omissions in this Accepted Manuscript or any consequences arising from the use of any information it contains. www.rsc.org/greenchem Page 1 of 21 Green Chemistry Green Chemistry RSCPublishing CRITICAL REVIEW Catalytic Routes towards Acrylic Acid, Adipic Acid and ε-Caprolactam starting from Biorenewables Cite this: DOI: 10.1039/x0xx00000x Rolf Beerthuis, Gadi Rothenberg and N. Raveendran Shiju* Received 00th January 2012, The majority of bulk chemicals are derived from crude oil, but the move to biorenewable resources is Accepted 00th January 2012 gaining both societal and commercial interest. Reviewing this transition, we first summarise the types of today’s biomass sources and their economical relevance. Then, we assess the biobased productions DOI: 10.1039/x0xx00000x of three important bulk chemicals: acrylic acid, adipic acid and ε-caprolactam.
    [Show full text]
  • CO Route Cuts Acrylic Acid Costs
    BEST INNOVATION BY AN SME since the 1980s but, to date, no one has been able to develop an economically feasible proc- ess. The thermoplastic has similar properties to polyethylene terephthalate (PET), but with significantly higher barrier properties. Novomer’s proprietary system is based on ho- mogeneous catalyst technology that was origi- nally discovered at New York-based Cornell University by Geoffrey Coates, Novomer’s co-founder and chairman of its scientific advisory board. The significance of the process is that it enables the use of a low-cost monomer, in this case carbon monoxide (CO), which is combined with ethylene oxide (EO) to make propriolactone. Novomer says that the use of inexpensive raw materials, such as CO and ethane-derived EO, and the catalyst’s selec- Superabsorbent polymer (SAP) made with Novomer’s catalyst has the same tivity, which is in excess performance as SAP made using the traditional propylene-based route of 99%, means that the Novomer “Our ultimate vision... is that low molecular weight PPL CO route could be shipped globally and converted to AA or acrylate esters upon demand” MIKE SLOWIK cuts acrylic Director of chemicals, Novomer cost of the process is potentially 40% lower than current available technologies. acid costs In addition, the process is expected to have a lower carbon and energy footprint because it operates at moderate temperatures, notably between 30-50oC. This compares with an Novomer, winner of the Best Innovation by an SME operating temperature of over 250oC in the existing AA production process. category, has widened its vision for the proprietary Novomer has raised about $30m so far in technology, which won last year’s Innovation with Best venture capital funding which it is using to part-finance construction of a continuous pi- Environmental Benefit category lot-scale process plant.
    [Show full text]
  • Propane to Acrylic Acid
    University of Pennsylvania ScholarlyCommons Department of Chemical & Biomolecular Senior Design Reports (CBE) Engineering 4-2013 Propane to Acrylic Acid Amanda Culp University of Pennsylvania Kevin Holmes University of Pennsylvania Rohan Nagrath University of Pennsylvania Dan Nessenson University of Pennsylvania Follow this and additional works at: https://repository.upenn.edu/cbe_sdr Part of the Biochemical and Biomolecular Engineering Commons Culp, Amanda; Holmes, Kevin; Nagrath, Rohan; and Nessenson, Dan, "Propane to Acrylic Acid" (2013). Senior Design Reports (CBE). 48. https://repository.upenn.edu/cbe_sdr/48 This paper is posted at ScholarlyCommons. https://repository.upenn.edu/cbe_sdr/48 For more information, please contact [email protected]. Propane to Acrylic Acid Abstract Acrylic acid is an essential polymer raw material for many industrial and consumer products. Currently, acrylic acid is manufactured from propylene, which is created as a by- product from fossil fuels manufacture and industrial cracking of heavy hydrocarbons. However, the discovery of new natural gas reserves presents new opportunities for the production of acrylic acid. A design feasibility study is presented to analyze the economics behind producing acrylic acid from the selective oxidation of propane to propylene over a mixed metal oxide catalyst, Mo1V0.30Te0.23Nb0.125Ox. The proposed plant is located in the U.S. Gulf Coast and produces 200MM lb/yr acrylic acid. Since the catalytic oxidation process has low propane conversion per pass, the process recycles unconverted propane and propylene back to the reactor to increase overall conversion. The acrylic acid is then separated and purified ot the glacial-grade industrial standard for polymer raw material of 99.7% acrylic acid by mass.
    [Show full text]
  • Process for the Hydroformylation of Certain Acrylic Acid Derivatives
    Europaisches Patentamt 19 European Patent Office Office europeen des brevets © Publication number: 0 306 094 B1 12 EUROPEAN PATENT SPECIFICATION @ Date of publication of patent specification @ int. ci.5 : C07C 69/716, C07C 67/38 29.01.92 Bulletin 92/05 (2?) Application number: 88201840.1 (22) Date of filing : 29.08.88 (54) Process for the hydroformylation of certain acrylic acid derivatives. (30) Priority: 01.09.87 GB 8720510 @ Proprietor : SHELL INTERNATIONALE RESEARCH MAATSCHAPPIJ B.V. Carel van Bylandtlaan 30 (43) Date of publication of application NL-2596 HR Den Haag (NL) 08.03.89 Bulletin 89/10 (72) Inventor : Drent, Eit (45) Publication of the grant of the patent : Badhuisweg 3 29.01.92 Bulletin 92/05 NL-1031 CM Amsterdam (NL) Inventor : Breed, Antonius Johannes Maria Badhuisweg 3 NL-1031 CM Amsterdam (NL) @ Designated Contracting States : BE CH DE FR GB LI NL (74) Representative : Tuijn, Jan Warnaar et al Shell Internationale Research Maatschappij (56) References cited : B.V., Patents, Licensing & Trade Marks EP-A- 0 125 567 Division, P.O. Box 302 FR-A- 2 365 549 NL-2501 CH The Hague (NL) CO "<t o> o CO o CO Note : Within nine months from the publication of the mention of the grant of the European patent, any person may give notice to the European Patent Office of opposition to the European patent granted. Notice of opposition shall be filed in a written reasoned statement. It shall not be deemed to have been LU filed until the opposition fee has been paid (Art. 99(1) European patent convention).
    [Show full text]
  • Acrylamido-2-Methyl Propane Sulfonic Acid As Corrosion Protective Film of Steel
    Int. J. Electrochem. Sci., 10 (2015) 6106 - 6119 International Journal of ELECTROCHEMICAL SCIENCE www.electrochemsci.org Synthesis and Application of Poly Ionic Liquid-Based on 2- Acrylamido-2-methyl Propane Sulfonic Acid as Corrosion Protective Film of Steel Ayman M. Atta1,2,*, Gamal A. El-Mahdy1,3, Hamad A. Allohedan1 and Mahmood M. S. Abdullah1 1 Surfactants Research Chair, Department of Chemistry, College of Science, King Saud University, P.O. Box 2455, Riyadh 11451, Kingdom of Saudi Arabia; 2 Petroleum Application Department, Egyptian Petroleum Research Institute, Cairo 11727, Egypt. 3 Department of Chemistry, Faculty of science, Helwan University, 11795 Helwan, Egypt. *E-mail: [email protected] Received: 12 May 2015 / Accepted: 30 May 2015 / Published: 24 June 2015 The present work aims to prepare new ionic liquid polymers based on protonation of diethylethanol amine (DEEA) with polymerizable monomers such as 2-acrylamido-2-methyl propane sulfonic acid (AMPS) and acrylic acid (AA). The polymerizable monomer was polymerized without solvent to prepare viscous poly ionic liquid as AMPS/AA-QA. The chemical structure and thermal characteristics of AMPS/AA-QA were investigated by NMR, DSC and TGA. The wetting characteristics of AMPS/AA-QA were measured at the steel surface by measuring the contact angles. This work describes the successful performance of AMPS/AA-QA as eco-friendly corrosion inhibitors for steel in acidic chloride solution. Corrosion inhibition of steel was carried out by electrochemical techniques. The experimental results reveal that AMPS/AA-QA is efficient mixed type corrosion inhibitors. Inhibition efficiency of 93.7% is reached with 25ppm of AMPS/AA-QA.
    [Show full text]
  • A Short Enantioselective Pathway for the Synthesis of the Anti-Influenza
    Published on Web 04/25/2006 A Short Enantioselective Pathway for the Synthesis of the Anti-Influenza Neuramidase Inhibitor Oseltamivir from 1,3-Butadiene and Acrylic Acid Ying-Yeung Yeung, Sungwoo Hong, and E. J. Corey* Department of Chemistry and Chemical Biology, HarVard UniVersity, Cambridge, Massachusetts 02138 Received March 9, 2006; E-mail: [email protected] The recent emergence of the avian virus H5N1 raises the possibility of a pandemic wave of life-threatening flu that requires prompt action.1 A four-pronged effort to avert widespread disease is now underway that consists of the following components: (1) worldwide surveillance of both wild and domesticated birds with quick culling of the latter, (2) development of recombinant vaccines against the H5N1 virus and its mutated forms whose production can be scaled up rapidly,2 (3) procedures for quarantine, and (4) ramped up production of the orally effective, synthetic neuramidase and explosive azide-containing intermediates. The route described 3 inhibitor oseltamivir phosphate (Tamiflu) (1). This paper describes herein has been used for the synthesis of oseltamivir and also its a total synthesis of 1 that would appear to have a number of enantiomer. advantages over existing processes and the potential to increase the rate of production. Heroic efforts by synthetic chemists at Gilead Sciences, Inc.4 and F. Hoffman-La Roche, Ltd.5 have resulted in the development of several synthetic pathways to 1, culminating in the current production method.5 That process falls short of the ideal for several reasons: (1) the starting point in the synthesis is either (-)-shikimic or (-)-quinic acid, which are complex relatively expensive and of The synthesis of 1 is summarized in Scheme 1.
    [Show full text]
  • Synthesis, Characterization of a New Polyacrylic Acid Superabsorbent, Some Heavy Metal Ion Sorption, the Adsorption Isotherms, and Quantum Chemical Investigation
    materials Article Synthesis, Characterization of a New Polyacrylic Acid Superabsorbent, Some Heavy Metal Ion Sorption, the Adsorption Isotherms, and Quantum Chemical Investigation Sevil Savaskan Yilmaz 1,* , Nuri Yildirim 1, Murat Misir 2, Yasin Misirlioglu 2 and Emre Celik 1 1 Department of Chemistry, Faculty of Sciences, Karadeniz Technical University, University Avanue, 61080 Trabzon, Turkey; [email protected] (N.Y.); [email protected] (E.C.) 2 Faculty of Engineering and Architecture, Ahi Evran University, 40100 Kır¸sehir, Turkey; [email protected] (M.M.); [email protected] (Y.M.) * Correspondence: [email protected]; Tel.: +90-462-377-2506; Fax: +90-462-325-3195 Received: 3 July 2020; Accepted: 13 August 2020; Published: 1 October 2020 Abstract: Poly(acrylic acid/Kryptofix 23-Dimethacrylate) superabsorbent polymer [P (AA/Kry23-DM) SAP] was synthesized by solution polymerization to remove Co, Ni, Cu, Cd, Mn, Zn, Pb, Cr, and Fe ions in water and improve the quality of the water. Kry23-DM cross-linker (1,4,7,13,16-Pentaoxa-10,19 diazo cyclohexene icosane di methacrylate) was synthesized using Kry23 and methacryloyl chloride. The characterization of the molecules was done by FTIR, TGA, DSC, and SEM techniques. The effects of parameters such as pH, concentration, and the metal ion interaction on the heavy metal ions uptaking of SAP was investigated. It was observed that P (AA/Kry23-DM) SAP has maximum water absorption, and the absorption increases with the pH increase. Adsorption rates and sorption capacity, desorption ratios, competitive sorption (qcs), and distribution coefficient (log D) of P(AA/Kry23-DM) SAP were studied as a function of time and pH with the heavy metal ion concentration.
    [Show full text]
  • Synthetic Efforts for Stereo Structure Determination of Cytotoxic Marine Natural Product Pericosines As Metabolites of Periconia Sp
    Int. J. Mol. Sci. 2008, 9, 401-421 International Journal of Molecular Sciences ISSN 1422-0067 © 2008 by MDPI http://www.mdpi.org/ijms Review Synthetic Efforts for Stereo Structure Determination of Cytotoxic Marine Natural Product Pericosines as Metabolites of Periconia sp. from Sea Hare Yoshihide Usami,* Hayato Ichikawa and Masao Arimoto Osaka University of Pharmaceutical Sciences, 4-20-1 Nasahara, Takatsuki, Osaka 569-1094, Japan * Author to whom correspondence should be addressed; E-mail: [email protected] Received: 10 January 2008; in revised form: 18 March 2008 / Accepted: 19 March 2008 / Published: 24 March 2008 Abstract: Pericosines are unique C7 cyclohexenoid metabolites of Periconia byssoides OUPS-N133 fungus that was originally isolated from the sea hare, Aplysia kurodai. Pericosines show significant in vitro cytotoxicity against P388 lymphocytic leukemia cells. Pericosine A, in particular, shows the most potent activity and significant in vivo antitumor activity against P388 cells. Thus, pericosines are promising candidates for seed compounds of anticancer drugs. However, before the total syntheses of pericosines were accomplished, their stereo structures could not be determined by spectral analyses because they have multi- functionalized cyclohexenoid structures with torsional strain. In this review, synthetic efforts for pericosines in this decade are surveyed. Keywords: marine natural product, antitumor, pericosine, structure determination, total synthesis, carbasugar 1. Introduction Synthetic studies of carbasugars have been progressing on a worldwide scale [1-3]. Carbasugars are a class of carbocyclic analogues of monosaccharides in which oxygen atom in the ring is replaced with a carbon atom. Because of this, they are also called pseudo-sugars. Carbasugars exhibit gycosidase inhibitory, antitumor (including anticancer), antiviral, antifungal, antibacterial, and antimalarial activities.
    [Show full text]
  • Acrylic Acid Glacial August 2003
    Technical Data Sheet Acrylic Acid Glacial August 2003 Unsaturated monocarboxylic acid, for manufacturing polymers and for use as a feedstock for syntheses. Structural formula OH CAS No.: 79-10-7 EINECS No.: 201-177-9 O C3H4O2 Molar mass: 72.1 Product specification Assay (Gas chromatography) % 99.5 (min.) Water content (ASTM E 203) % 0.1 (max.) Diacrylic acid content on despatch ppm 2000 (max.) (gas chromatography) Color on despatch (APHA, 20 (max.) ASTM D 1209) Standard stabilization ppm MEHQ 200 + 20 (ASTM D 3125) Other properties Appearance clear, colorless Physical form liquid at >13ºC Odor pungent 3 Density at 25ºC g/cm 1.046 Refractive index nd at 20ºC 1.418-1.422 Boiling point ºC 141 Freezing point ºC ca. 13 Viscosity @ 20°C mPa•s 1.3 Specific heat of liquid at 20ºC kJ/kgºC 2.05 Heat of evaporation at boiling point kJ/kg 634 Heat of polymerization kJ/kg 1079 Heat of combustion at 25ºC kJ/kg 19085 Vapor pressure at 20ºC mbar 3.8 Temperature rating for electrical ºC T 2 (300-450) equipment ((VPE 170/171) Applications Acrylic acid is an unsaturated carboxylic acid. It reacts as a vinyl compound and as a carboxylic acid. It readily undergoes polymerization and addition reactions. It can be used as a carboxylic acid to produce acylic esters, acrylamide, N-substituted acrylamides and acrylyl chloride by common methods. Copolymers can be produced with acrylic and methacrylic esters, acrylonitrile, maleic acid esters, vinyl acetate, vinyl chloride, vinylidene chloride, styrene, butadiene and ethylene. Homopolymers of acrylic acid and copolymers which contain a preponderance of acrylic acid have a glassy consistency and are frequently soluble in water.
    [Show full text]
  • The Role of 2-Acrylamido-2- Methylpropanesulfonic Acid in Conductive Medical Hydrogel Electrodes
    The Role of 2-Acrylamido-2- methylpropanesulfonic Acid in Conductive Medical Hydrogel Electrodes Hyungsoo Kim1, Geoffrey P. Marks2, and Carlos Piedrahita1 (1) The Lubrizol Corporation, 29400 Lakeland Blvd, Wickliffe, OH 44092, USA (2)Lubrizol Limited, Derby, DE56 4AN, United Kingdom Abstract Hydrogel, a lightly cross-linked polymer network, can swell substantially in water taking on hydrophilic and conductive character with potential for biomedical applications. This paper will explore the use of 2-acrylamido-2-methylpropanesulfonic acid in conductive medical hydrogels prepared via UV polymerization to make an electrocardiogram electrode. Different hydrogel formulation strategies, where parameters studied include crosslinker concentration, pH, water content, humectant, polymer composition and neutralizing salt, were systematically investigated to improve properties including gel uniformity, moisture retention, conductivity, and skin adhesion. Introduction A polymer hydrogel is a lightly cross-linked and highly hydrated polymer network with hydrophilic and conductive characteristics.1 The properties of the hydrogel are affected by various factors: the hydrophilicity and/or ionic character of polymer chains, the components in the swelling medium, pH, and temperature.2-5 The polymer hydrogel usually consists of hydrogen-bonded structures that can adhere to human tissue and be used for biomedical applications: drug delivery6,7, wound dressing8, biomedical adhesive9, medical electrodes, etc. Examples where hydrogels are used as medical electrodes
    [Show full text]
  • Bioconversion of Acrylonitrile to Acrylic Acid by Rhodococcus Ruber Strain AKSH-84
    J. Microbiol. Biotechnol. (2011), 21(1), 37–42 doi: 10.4014/jmb.1006.06044 First published online 12 November 2010 Bioconversion of Acrylonitrile to Acrylic Acid by Rhodococcus ruber Strain AKSH-84 Kamal, Ahmed*, M. Shiva Kumar, C. Ganesh Kumar, and Thokhir Basha Shaik Chemical Biology Laboratory, Indian Institute of Chemical Technology, Hyderabad 500607, India Received: June 26, 2010 / Revised: September 20, 2010 / Accepted: September 23, 2010 A new versatile acrylonitrile-bioconverting strain isolated million tons in 2005, with an expectation to reach around from a petroleum-contaminated sludge sample and identified 3.7% by the year 2011 [4, 5]. The current industrial as Rhodococcus ruber AKSH-84 was used for optimization demand for acrylic acid is catered by the chemical of medium and biotransformation conditions for nitrilase production process, which is based on gas-phase catalytic activity to produce acrylic acid. A simple and rapid HPLC oxidation of propylene via acrolein in a single or two-step protocol was optimized for quantification of acrylic acid, process. The drawbacks of these methods include side acrylamide, and acrylonitrile. The optimal medium conditions reactions, very high temperatures, and risk of the radical- for nitrilase activity were pH of 7.0, temperature of 30oC, initiated exothermic polymerization with possibility of agitation of 150 rpm, and inoculum level of 2%. Glycerol dimerization of acrylic acid [14]. The environmental safety as a carbon source and sodium nitrate as the nitrogen and cost efficacy are other serious concerns. Biotechnological source provided good nutritional sources for achieving good and biocatalytic processes have been found to be more biotransformation.
    [Show full text]