HDMI to SCART Converter

Total Page：16

File Type：pdf, Size：1020Kb

HDMI TO SCART Converter P/N: MC-CONHMSCART 1. Products introduction This converter provides HDMI signal conversion into a composite video signal through a SCART interface. It can be used only on an HDMI interface device connected to a TV set with SCART interface. With this converter you can enjoy high-definition video through SCART interface on the TV or playing games. 2. Performance characteristics 1. HDMI input to SCART output 2. SCART output=composite video signal +stereo audio signal; 3. Support HDMI signal format: 480i(60Hz),480P(60Hz),576i(50Hz),576P(50Hz),720P(50/60Hz), 1080i(50/60Hz),1080P(50/60Hz) 4. According to HDMI1.3 standard, compatible with HDCP 3. The interface description 1. DC 5V power input port 2. Power LED light 3. HDMI signal input port 4. The SCART output format PAL/NTSC switch. 5. ZOOM Button, change the picture size on screen display, press the fast, 100%-98%-96%-94%-92%-90%-100% cycle. Press 3 seconds, 16:9 and 4:3 switch. 6. HDMI signal LED light 7. SCART output port 4. Performance parameters 1. Power:5V/1A; 2. Input: HDMI signal; 3. Output: SCART signal(composite video signal +stereo audio signal); 4. SCART output video signal format: PAL and NTSC; 5. SCART output video type impedance: 75Ω 6. Product size: 114mm x 75mm x 25mm(L*W*H) 5. Packaging and accessories NAME NUMBER Remarks UNIT 1 POWER 1 5V1A MANUAL 1 6. Connection diagram Note: 1. SCART interface only outputs composite video signal and the sound signal, no RGB. 2. HDMI shielded wire should not exceed 10 meters. 3. With 1080p signal on HD equipment output flickering may be present. 1080i or 720p HDMI signal is recommended. 4. If the HDMI input signal source is a PC graphics card, there may be no image or image may disappear. Please change the graphics resolution in order to achieve the best display effect. Please use the machine as the instruction listed to keep the long use lifetime of the machine. 1. The machine should be placed at the sport far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment. 2. All parts will be free from the strong shake, hit, fall. 3. Touching the power adaptor with the wet hands is prohibited. 4. Please hold the power adapter head and do not pull the power cord when cut off from the socket. 5. Please turn the power off when the machine is not used for long time. 6. Please do not open the cover and do not touch the inside parts. 7. Please use the original factory power adapter. 8. Before power on, please check the connection line carefully. And make sure that all interfaces are normally connected. .

Copy Link

Recommended publications

Generic Cable Discharge Event (CDE) Automated Test System Based on TLP Test Method
Generic Cable Discharge Event (CDE) Automated Test System Based on TLP Test Method Wei Huang, Jerry Tichenor Web: www.esdemc.com Email: [email protected] Tel: (+1) 573-202-6411 Fax: (+1) 877-641-9358 Address: 4000 Enterprise Drive, Suite 103, Rolla, MO, 65401 Cable Discharge Event (CDE) Background What is CDE Event ? A Cable Discharge Event (CDE) is electrostatic discharge(s) between metal of a cable connector and the mating cable connector or plug. It is very common in daily life. When CDE happens, transient high current and high voltage pulses are generated into the connector pins and cause potential damage to the system with connector. The pulse characteristic is determined by the cable type, cable length, physical arrangement of the cable and system with connector, and system with connector side circuitry. A Generic CDE System Concept Why understanding CDE robustness is important ? The discharge processes are complicated due to the number of pins involved and their connections to a system. In addition, the occurrence rate and severity of the static discharge is important to design a robust system. Basic System Features: A well repeatable test setup to reproduce cable discharge events Pulse injection level covers different types of cable connections Additional System Features: Automatic computer controlled test for all available connector pins Automatic remove DUT residue charge safely after each pulse safely Integrate current and voltage probes to monitor CDE events on each pin ESDEMC Collected Cable Pins and Practical Passive
[Show full text]
Video for Audio Engineers
Video for Audio Engineers David G. Tyas IKON AVS Ltd, 238 Ikon Estate, Hartlebury, Worcs.. DY10 4EU www.ikonavs.com 1. Introduction The purpose of this seminar is to give a practical introduction to the use of both analogue and digital video. ’not intended as an in-depth technical appraisal but more biased towards the practicalities of using video to enhance or augment audio. Its regrettable that all to often a video presentation is let down by poor quality sound, so perhaps with a professional audio engineer in charge, this situation can change. Lets start at the beginning, with that I mean the most basic of analogue video signals you will encounter. My apologies if this appears very basic to some of you, but a brief resume of analogue video will help the migration to digital later. 2. Composite Video The most basic video signal is of course Composite Video; also know as CVBS (Composite Video Blanking Sync). ’normally a single unbalanced signal designed for a single point-to-point connection, rather like the original audio circuits used using impedance matching for reliability. Other than being an unbalanced signal, not a lot different, except for the frequency. Whilst with audio we are typically dealing with a frequency range of 20Hz to 20KHz, more or less, with composite video the frequency is more in the order of 5.5MHz and creates a greater need for due diligence in connection and termination. Video for Audio Engineers – Rev 1.03 page 1 2.1 Correct termination With all video signals it is important to have the correct termination at the receiver (usually a display of some type).
[Show full text]
HDMI to Scart Converter User Manual
HDMI to Scart converter User manual Safety Precautions Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: ■ Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. ■ To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. ■ Never spill liquid of any kind on or into this product. ■ Never push an object of any kind into this product through module openings or empty slots, as you may damage parts. ■ Do not attach the power supply cabling to building surfaces. ■ Do not allow anything to rest on the power cabling or allow it to be abused by persons walking on it. ■ To protect the equipment from overheating, do not block the slots and openings in the module housing that provide Ventilation. Precautions Failure to follow the precautions described below may cause damage to the product and void the warranty. ■ DO NOT open the case. Doing so will void the warranty. If you find problem with it, please return back to your retailer or seller who will assist you or provide you with solution. ■ DO NOT use third-Party AC adapter or power cord. Doing so may damage the product. ■ DO NOT bump, jar or drop contents of the products as it may damage it and result in warranty void. ■ DO NOT set any liquids or beverages on the drive as they may damage the product.
[Show full text]
Delock Converter SCART / HDMI > HDMI with Scaler
Delock Converter SCART / HDMI > HDMI with Scaler Description The Delock A/V converter converts an analogue SCART video and audio signal to a digital HDMI signal. Thereby e.g. a VCR or game console can be connected to an HDMI monitor or Full HD TV. In addition, an HDMI input is present, so that the converter can be used as a switch. Both inputs can be scaled via the integrated video processor to an HDMI output signal of 720p or 1080p with 50 or 60 Hz. The audio signal is simultaneously available at the HDMI output, as a digital S/PDIF signal and as analogue signal at the stereo jack. Specification Item No. 62783 • Connector: EAN: 4043619627837 Input: 1 x SCART female (RGB or Composite) Country of origin: China 1 x HDMI-A 19 pin female Package: Box 1 x DC 5 V power connector Output: 1 x HDMI-A 19 pin female 1 x 3.5 mm 3 pin stereo jack female 1 x Coaxial female S/PDIF • Input switchable between SCART / HDMI • Output switchable between 720p / 1080p, PAL / NTSC • Resolution (SCART input) PAL / NTSC-M / NTSC 4.43 / SECAM / PAL-M / PAL-N • Resolution (HDMI output) 1280 x 720 or 1920 x 1080 @ 50 or 60 Hz • Supports stereo audio • Dimensions (LxWxH): ca. 102 x 101 x 25 mm Power supply specification • Wall power supply • Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.18 A • Output: 5 V / 1 A • Ground outside, plus inside • Dimensions: inside: ø ca. 2.1 mm outside: ø ca. 5.5 mm length: ca.
[Show full text]
HDMI/SCART PAL System to NTSC HDMI Digital Audio Video Converter
HDMI/SCART PAL System to NTSC Introduction: HDMI Digital Audio Video Converter SCART+HDMI to HDMI converter can convert 480I(NTSC)/576I(PAL) format signal to 720P/1080P HDMI signal output, also it can connect with the high definition HDMI input interface, Easily connect with the DVD, set-top box, HD player, Game Console(PS2, PS3, PSP, WII , XBOX360 etc). Function: Quick Installation Guide ● HDMI output interface: connect with high definition TV or high Ver. 1.0 definition projector HDMI output format: 720P@50/60Hz, 1080P@50/60Hz Audio output format: Digital coaxial audio, analog stereo audio ● SCART input interface: DVD, set-top box, other players. SCART input format: PAL/NTSC-M/NTSC4.43/SECAM/PAL-M/PAL-N ● HDMI input format: 480I/576I/480P/576P/720P@50/60Hz, 1080I@50/60Hz, 1080P@50/60Hz Compatible with several DVI Format: 800x600, 1024x768, 1280x1024, All brand names and trademarks are properties of 1360x768, 1680x1050, 1920x1080 etc. their respective owners ● 3.5mm audio interface: Connect with analog audio amplifier or headphones input interface. ● Digital coaxial output: Connect with digital audio amplifier 1 2 Features: 6.Audio----------------------------------Analog audio output interface 7.Coaxial-------------------------------Coaxial digital audio output interface ● Scales SCART Signal(RGB or Composite Video) to HDMI 720P or 8.SCART(CVBS)/HD----------------SCART or HDMI input switching button 1080P; 9.720P/1080P-----------------720P or 1080P HDMI output switching button ● HDMI output: 720P, 1080P; 10.PAL/NTCS(50Hz/60Hz)--------50Hz or 60Hz HDMI output state button ● SCART audio is integrated into HDMI out as well as pass-through to earphone or sound box output; ● Automatically detect RGB(50/60Hz), Composite Video(NTSC/PAL); Connection diagram: ● Auto-store setting of output resolution.
[Show full text]
Kycon Home Page
CATALOG NUMBER 16 TABLE OF CONTENTS KYCON Catalog #16 KYCON continues D-Subminiature Connectors 3 its leadership in • Surface Mount connectors by • Right-Angle, Vertical & Solder Cup offering a complete • Compact, High Density & VESA Designs line of sizes and • Cable Connectors • Multi Port options. • Ferrite • Hardware High Frequency I/O Connectors 39 • Universal Serial Bus (USB) • Mini-USB • IEEE 1394 • DVI • SCSI Modular Jacks with Integrated Magnetics 51 • Through Hole • Surface Mount • Modular Jack over Stacked USB Modular Jacks and Plugs 59 • Surface Mount & Through Hole • Right Angle & Perpendicular • Ganged Jacks • Ferrite Mini-DINs / Circular DINs 83 • Surface Mount & Through Hole • Right Angle & Vertical • Panel & Cable Mount • Ferrite, Stacked & Slim Designs Audio Jacks 99 • 2.5mm & 3.5mm • Surface Mount & Through Hole • Low Profile, Slim, Stacked & Panel Mount • RCA Phono Jacks DC Power Connectors 119 • 1.0 mm, 1.3 mm, 2.0 mm and 2.5 mm • Surface Mount & Through Hole • Right Angle, Vertical & Panel Mount Other Connectors and Sockets 130 • Edge Card Connectors • DIMM Sockets • SCART Connectors • Miniature Ribbon Connectors • Chip Carrier Sockets 2002 KYCON, Inc. • Tel: +1 408-494-0330 • US: 1-888-KYCON-22 • Fax: +1 408-494-0325 • www.kycon.com 1 DESIGN CHALLENGES KYCON Kycon Solutions KYCON continues Surface Mount Connectors its leadership in As more and more PC board production is moving to SMT, Kycon innovative connector is adding surface mount designs to many of its connector lines. design by offering a Connectors currently available in surface mount are USB, mini-USB, IEEE 1394, D-subs, modular jacks, chip carrier sockets, number of design DC power jacks, audio jacks, and mini-DINs.
[Show full text]
12-Bit, Integrated, Multiformat SDTV/HDTV Video Decoder and RGB Graphics Digitizer
12-Bit, Integrated, Multiformat SDTV/HDTV Video Decoder and RGB Graphics Digitizer Data Sheet ADV7403 FEATURES GENERAL DESCRIPTION 4 Noise Shaped Video (NSV)® 12-bit analog-to-digital The ADV7403 is a high quality, single chip, multiformat video converters (ADCs) sampling up to 140 MHz (140 MHz decoder and graphics digitizer. This multiformat decoder supports speed grade only) the conversion of PAL, NTSC, and SECAM standards in the Mux with 12 analog input channels form of composite or S-Video into a digital ITU-R BT.656 format. SCART fast blank support The ADV7403 also supports the decoding of a component Internal antialias filters RGB/YPrPb video signal into a digital YCrCb or RGB pixel output NTSC/PAL/SECAM color standards support stream. The support for component video includes standards 525p/625p component progressive scan support such as 525i, 625i, 525p, 625p, 720p, 1080i, 1250i, and many 720p/1080i component HDTV support other HD and SMPTE standards. Graphic digitization is also Digitizes RGB graphics up to 1280 × 1024 at 75 Hz (SXGA) supported by the ADV7403; it is capable of digitizing RGB (140 MHz speed grade only) graphics signals from VGA to SXGA rates and converting them 24-bit digital input port supports data from DVI/HDMI into a digital RGB or YCrCb pixel output stream. SCART and receiver IC overlay functionality are enabled by the ability of the ADV7403 Any-to-any, 3 × 3 color-space conversion matrix to simultaneously process CVBS and standard definition RGB Industrial temperature range: −40°C to +85°C signals. The fast blank pin controls the mixing of these signals.
[Show full text]
VGA Connector Datasheet
VGA connector 1 VGA connector VGA connector (DE-15/HD-15) A female DE-15 output in a laptop computer. Type Computer analog video connector Production history Designer IBM based on D-subminiature Designed 1987 Produced 1987 to present Superseded by DVI (1999) General specifications Hot pluggable No Video signal RGB video signal plus option H and V sync Pins 15 Connector DE-15 Data Data signal I²C data channel for DDC information Pin out A female DE15 socket (videocard side). Pin 1 RED Red video Pin 2 GREEN Green video Pin 3 BLUE Blue video VGA connector 2 Pin 4 ID2/RES formerly Monitor ID bit 2, reserved since E-DDC Pin 5 GND Ground (HSync) Pin 6 RED_RTN Red return Pin 7 GREEN_RTN Green return Pin 8 BLUE_RTN Blue return Pin 9 KEY/PWR formerly key, now +5V DC Pin 10 GND Ground (VSync, DDC) Pin 11 ID0/RES formerly Monitor ID bit 0, reserved since E-DDC Pin 12 ID1/SDA formerly Monitor ID bit 1, I²C data since DDC2 Pin 13 HSync Horizontal sync Pin 14 VSync Vertical sync Pin 15 ID3/SCL formerly Monitor ID bit 3, I²C clock since DDC2 The image and table detail the 15-pin VESA DDC2/E-DDC connector; the diagram’s pin numbering is that of a female connector functioning as the graphics adapter output. In the male connector, this pin numbering corresponds with the mirror image of the cable’s wire-and-solder side. A Video Graphics Array (VGA) connector is a three-row 15-pin DE-15 connector.
[Show full text]
MC-WU8461/MC-WU8451 User's Manual (Detailed) Operating Guide – Technical
LCD Projector MC-WU8461/MC-WU8451 User's Manual (detailed) Operating Guide – Technical Example of computer signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA VGA (72Hz) 640 x 480 37.5 75.0 VESA VGA (75Hz) 640 x 480 43.3 85.0 VESA VGA (85Hz) 800 x 600 35.2 56.3 VESA SVGA (56Hz) 800 x 600 37.9 60.3 VESA SVGA (60Hz) 800 x 600 48.1 72.2 VESA SVGA (72Hz) 800 x 600 46.9 75.0 VESA SVGA (75Hz) 800 x 600 53.7 85.1 VESA SVGA (85Hz) 832 x 624 49.7 74.5 Mac 16” mode 1024 x 768 48.4 60.0 VESA XGA (60Hz) 1024 x 768 56.5 70.1 VESA XGA (70Hz) 1024 x 768 60.0 75.0 VESA XGA (75Hz) 1024 x 768 68.7 85.0 VESA XGA (85Hz) 1152 x 864 67.5 75.0 VESA 1152 x 864 (75Hz) 1280 x 768 47.7 60.0 VESA W-XGA (60Hz) 1280 x 800 49.7 60.0 VESA 1280 x 800 (60Hz) 1280 x 960 60.0 60.0 VESA 1280 x 960 (60Hz) 1280 x 1024 64.0 60.0 VESA SXGA (60Hz) 1280 x 1024 80.0 75.0 VESA SXGA (75Hz) 1440 x 900 55.9 59.9 VESA WXGA+ (60Hz) *1 1280 x 1024 91.1 85.0 VESA SXGA (85Hz) 1680 x 1050 65.3 60.0 VESA WSXGA+ (60Hz) *1 1600 x 1200 75.0 60.0 VESA UXGA (60Hz) W-UXGA (60Hz) *1 1920 x 1200 74.0 60.0 VESA Reduced Blanking *1) Supported except for HDMI® input.
[Show full text]
Owner's Manual)
ENGLISH OWNER’S MANUAL LED TV LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating the your TV and retain it for future reference. 22MA53D 22MA53V 22MA53S 23MA53D 23MA53V 23MA53S 24MA53D 24MA53V 24MA53S 27MA53D 27MA53V 27MA53S www.lg.com 2 TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH 3 LICENSES 35 REMOTE CONTROL 4 INSTALLATION PROCEDURE 37 CUSTOMIZING SETTINGS 37 Accessing main menus 5 ASSEMBLING AND PREPARING USING THE USER GUIDE 5 Unpacking 38 8 Parts and buttons 38 Accessing User Guide menu. 10 Lifting and moving the TV 38 - Using the TV menu 11 Setting up the TV 38 - Using the Remote Control 11 - Attaching the Stand 13 - Mounting on a table 39 MAINTENANCE 14 - Tidying cables 15 - Detaching the Stand 39 Cleaning Your TV 16 - Mounting on a wall 39 Screen and frame 39 Cabinet and stand 39 Power cord WATCHING TV 18 40 Preventing “Image burn” or “Burn-in” on 18 Turning the TV on for the first time your TV screen 20 MAKING CONNECTIONS 41 TROUBLESHOOTING 20 Connecting an antenna 41 General 21 Satellite connection 22 Connecting to a HD receiver, DVD, VCR 42 SPECIFICATIONS player or Gaming device 22 - HDMI connection 23 - HDMI to DVI connection 24 - Component connection 25 - Composite connection 26 - Euro Scart connection 27 Connecting to an audio system 27 - Headphone connection 28 Connecting to a USB 28 Connecting to a CI Module 29 MHL connection 30 Connecting to a wired network 31 Connecting to a PC 32 - HDMI connection 33 - HDMI to DVI connection 34 - RGB connection LICENSES 3 LICENSES ENGLISH Supported licenses may differ by model.
[Show full text]
Product Portfolio HD Connectivity Ltd
Product Portfolio HD Connectivity Ltd. HD�Connectivity�design�and�build� professional�quality�HDMI�connectivity� products,�with�a�core�competence�in�HD� video�switching�and�distribution�systems.� Utilising�a�mixture�of�long-distance� transmission�technologies,�such�as� HDBaseT�and�HD�over�IP,�our�systems�are� capable�of�delivering�high�definition� multimedia�content�and�control,�to�a� virtually�unlimited�number�displays�over�a� single�Cat5e/6�cable,�without�any�loss�in� quality. From�our�product�range,�installers�can� select�the�best�suited�HD�distribution� solution�for�multi-display�networks�of�any� size�-�optimised�for�full�system�control,� integration�and�management. HD�Connectivity�Ltd. Unit�23�Link�Business�Centre Link�Way Malvern WR14�1UQ� Great�Britain Tel:�+44�(0)�1684�576�348 hdconnectivity.com 2 Contents Professional�Series 4 Modular�Introduction 5 Hardware�Overview 6-7 System�Software 8 Components 9 Smart�Multiroom 10 Multiroom�Introduction 11 Hardware�Overview 12-13 HDBaseT�Matrix�Packages 14 Receiver�Options,�Control�Software 15 Devices�+�Accessories 16 Switching,�Splitting 17 Extension,�Conversion,�Adapters 18 HDMI�Cables 19 Build��HDMI�Networks 20 2G+�Introduction 21 System�Overview 22 Feature�Comparison 23 Components 24 Everything�EverywhereTM�Case�Study 25 Digital�Signage� 26 LCD HDC�Display�Introduction 27 Cost�Effective�Large�Format�Displays� 28 Single�Displays 29 Quad�Displays,�Video�Walls 30 Morgan�Motor�Case�Study 31 All�HD�Connectivity�brands�are�denoted� by�the�logo�above. 3 professional series hdanywhere.co.uk/modular 4 For�high-end�custom�installation�projects. A�highly�customisable�HDMI�matrix� switching�and�distribution�solution�that� enables�integrators�to�bespoke�build�HD� distribution�systems�matched�perfectly�to� the�individuality�of�every�project.
[Show full text]
Home • Support • Technical Articles • Putting the HD in Hdbaset Putting
Home • Support • Technical Articles • Putting the HD in HDBaseT Putting the HD in HDBaseT So what is HDBaseT? It is a new technology that has many installers and Home Theater/DIY techies excited. HDBaseT will facilitate connecting consumer electronics equipment in the home/office in the manner that high end multimedia systems are connected. Thus it is optimized for whole-home and commercial multimedia distribution. It will connect all the entertainment devices in a setting through its 5Play™ feature set, converging uncompressed full HD digital video, audio, 100BaseT Ethernet, power over cable and various control signals through a single CAT5e/6 cable with RJ45 connectors (Up to 100m/328ft). 5Play™ makes it possible to cut the assortment of cables going to the device to a single cable. What is HDBaseT's 5Play™ Feature set and what does it include? Why should I care about 5Play™ you say? 5Play™ is an unrivaled feature-set that merges full uncompressed HD video, audio, 100BaseT Ethernet, power and various control signals through a single inexpensive CAT5e/6 LAN cable. The fact that 5Play™ does all of this, creating a network of your displays and sources, is what makes it so amazing. Imagine replacing a huge bundle of cables from the front of your media room to the back with a single Cat5e or Cat6 cable. You could even use Flat CAT5e UTP cable to hide that single line under carpet. 1) Full, Uncompressed HD Video HDBaseT supports TV and PC video formats including standard, enhanced, high-definition and 3D video. It delivers Full HD/3D and 2K/4K uncompressed video to a network of devices or as a point-to-point connection.
[Show full text]