DOCSLIB.ORG

Investigation of Facilities Management Practices for Providing Feedback During the Design Development and Review Stages Fadi A

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Investigation of Facilities Management Practices for Providing Feedback During the Design Development and Review Stages Fadi A International Journal of Building Pathology and Adaptation Investigation of facilities management practices for providing feedback during the design development and review stages Fadi A. Fatayer, Mohammad A. Hassanain, Abdullatif Abdallah, Abdul-Mohsen Al-Hammad, Article information: To cite this document: Fadi A. Fatayer, Mohammad A. Hassanain, Abdullatif Abdallah, Abdul-Mohsen Al-Hammad, (2019) "Investigation of facilities management practices for providing feedback during the design development and review stages", International Journal of Building Pathology and Adaptation, https:// doi.org/10.1108/IJBPA-05-2018-0040 Permanent link to this document: https://doi.org/10.1108/IJBPA-05-2018-0040 Downloaded on: 02 March 2019, At: 01:22 (PT) References: this document contains references to 48 other documents. To copy this document: [email protected] Access to this document was granted through an Emerald subscription provided by emerald- srm:467320 [] For Authors If you would like to write for this, or any other Emerald publication, then please use our Emerald for Authors service information about how to choose which publication to write for and submission guidelines are available for all. Please visit www.emeraldinsight.com/authors for more information. About Emerald www.emeraldinsight.com Emerald is a global publisher linking research and practice to the benefit of society. The company manages a portfolio of more than 290 journals and over 2,350 books and book series volumes, as well as providing an extensive range of online products and additional customer resources and services. Emerald is both COUNTER 4 and TRANSFER compliant. The organization is a partner of the Committee on Publication Ethics (COPE) and also works with Portico and the LOCKSS initiative for Downloaded by AN-NAJAH UNIVERSITY At 01:22 02 March 2019 (PT) digital archive preservation. *Related content and download information correct at time of download. The current issue and full text archive of this journal is available on Emerald Insight at: www.emeraldinsight.com/2398-4708.htm Investigation Investigation of facilities of FM management practices practices for providing feedback during the design development and Received 8 May 2018 review stages Revised 24 November 2018 8 January 2019 Fadi A. Fatayer Accepted 12 January 2019 Building Engineering Department, An-Najah National University, Nablus, The State of Palestine Mohammad A. Hassanain Architectural Engineering Department, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia Abdullatif Abdallah Department of Management and Marketing, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia, and Abdul-Mohsen Al-Hammad Architectural Engineering Department, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia Abstract Purpose – The purpose of this paper is to investigate the current practices of the early facilities management (FM) involvement during the design development and review stages (DDRS), and recommend activities aimed at achieving better integration. Design/methodology/approach – A comprehensive literature review was conducted to ascertain the challenges faced by the integrated design team (IDT) in the absence of the facilities managers’ review of design solutions, and underscore the significance of the early involvement of facilities managers during the DDRS. A questionnaire survey was then developed for collecting data on eight aspects of the current practices of early FM involvement during the DDRS. The questionnaire survey was administered to the FM departments of 13 long established, public universities in Saudi Arabia. Ten responses were obtained and analyzed. Downloaded by AN-NAJAH UNIVERSITY At 01:22 02 March 2019 (PT) Findings – The findings suggest that the early involvement of the FM department enhances the operation and maintenance of facilities. This has been measured through reductions in the number of architectural, structural, electrical, plumbing, heating, ventilating and air conditioning defects. Practical implications – Recommendations were provided to facilitate the process of integrating the practices of two influential stakeholders of building projects. These recommendations encompass the need for maintainability considerations at the early schematic stage, the necessity of direct contact between the two parties and the necessity of facility managers’ increased familiarity of the design stage activities, among other recommendations. In this way, the study promotes the awareness of the significance of integrating FM with the IDT at the DDRS. Originality/value – This study contributes to the literature and practice by presenting a detailed analysis of the integration process between the FM department and the IDT. Furthermore, the outcomes of the integration between the parties were measured to assess the effectiveness of the collaboration and highlight the possible areas of improvement. Keywords Integration, Facilities management, Design phase, Design team, Maintenance feedback Paper type Research paper International Journal of Building Pathology and Adaptation The authors thank King Fahd University of Petroleum and Minerals for the support and facilities that © Emerald Publishing Limited 2398-4708 made this research possible. DOI 10.1108/IJBPA-05-2018-0040 IJBPA Introduction When a facility has been constructed and ownership transferred, there is often a gap between the expected performance of the facility and the actual performance (Erdener, 2003). If no modifications are applied to the facility, the substandard performance of the facility continues. On the other hand, if a decision is made to undertake modifications, these modifications can take several forms. This may include the replacement of equipment components, physical changes to the building and/or changes in occupants’ behavior (Rasmussen et al., 2017). In short, poorly designed facilities lead to inconveniences experienced by the facility’s users, demanding additional maintenance expenditure. Maintenance is a sub-discipline of the broad area of facilities management (FM). Maintenance involves the performance of activities aimed at reducing or removing the occurrence of failures, ensuring the smooth operation of facilities and extending the facilities’ service life (Hassanain et al., 2014a; Chua et al., 2018). Maintenance aims at optimizing the performance of facilities, while incurring minimum life cycle expenditure. The maintenance activities usually conducted consist of cleaning, inspecting, upgrading and replacing the facilities’ systems and components. These maintenance activities are necessary to preserve the performance of facilities, so that they can achieve their intended function (Arditi and Nawakorawit, 1999b). There are two broad classifications of maintenance strategies, including unplanned maintenance and planned maintenance. Unplanned maintenance results from unexpected failures, and is usually expensive. On the other hand, planned maintenance is based on the collection of reliable and accurate data on the condition of facilities (Rani et al., 2015). Traditionally, in the design and construction stages, the main aspects of a project that receive attention are the project’s capital cost, time and functionality. On the other hand, other long-term project aspects such as the maintainability and operability of the facility have received relatively less attention. Despite less emphasis being directed at maintainability, failure to consider maintainability at the early design stages can lead to increased life cycle, operation and maintenance (O&M) costs (Meier and Russell, 2000; Garcez et al., 2015; Salim et al., 2016; Isa et al., 2016; Carretero-Ayuso and García-Sanz-Calcedo, 2018). It is then crucial to consider maintenance at the inception of the project. Hassanain et al. (2014a) emphasized the significance of early maintenance consideration by noting that planning for maintenance should be initiated at the design phase, and should persist throughout the entire course of the facility’s service life. The incorporation of maintainability at the design and construction phases should lead to a reduction in O&M costs, in addition to easing the work required for maintenance (Hassanain et al., 2014a, b). Downloaded by AN-NAJAH UNIVERSITY At 01:22 02 March 2019 (PT) The FM department’s input during the design development and review stages (DDRS) is crucial for the design of an optimal facility, having minimal O&M defects. To date, previous research efforts have focused on limited aspects pertaining to the integration of the practices of the FM department with the integrated design team (IDT). These aspects include barriers to maintenance consideration during the DDRS, the outcomes of insufficient maintenance consideration, the level of FM involvement in the design process of facilities they subsequently manage, the design stage with the greatest opportunity for maintenance feedback and designers’ interest in assessing facilities they previously designed. However, none of these studies have rigorously investigated the integration process and the outcomes of such efforts. Thus, this paper seeks to investigate the current practice of the early FM involvement at the DDRS, and recommend activities aimed at achieving better integration. This study serves to increase the awareness of the facilities’ stakeholders on the potential benefits gained through the inclusion of FM department’s input during the DDRS. The study will be of practical value to design
Load more

Recommended publications
  • Selection of Logistics Company in Facility Management Sector with Topsis and Electre from Multi-Size Decision Making Methods
    IJBTS International Journal of Business Tourism and Applied Sciences Vol.7 No.1 January-June 2019 SELECTION OF LOGISTICS COMPANY IN FACILITY MANAGEMENT SECTOR WITH TOPSIS AND ELECTRE FROM MULTI-SIZE DECISION MAKING METHODS Ali Fuat Guneri, Omer Yildiz Yildiz Technical University, Department of Industrial Engineering, Istanbul, TURKEY [email protected], [email protected] ABSTRACT In this study, it is discussed selection of a logistics company for a firm operating in the facility management sector and aimed to make contribution to Facility Management Sector with scientific methods which has gained importance in recent years in Turkey. Since many qualitative and quantitative criteria must be taken into account to make a correct and reliab le selection of logistics company, multi-criteria decision making techniques TOPSIS and ELECTRE have been implemented in an integrated way. 9 different criteria have been taken into account to be able to choose among 5 companies to present the solution method of the decision problem. Criteria regarding to the problem are weighted by competent people from different sectors working with logistics companies. Optimal company selection with TOPSIS method is provided, order of preference is determined and with the ELECTRE method, both the results were confirmed and the companies were ranked according to their superiority. Keywords—Electre, Facility Management, TOPSIS I. INTRODUCTION Companies that move with the motive of survival in competitive markets are obliged to have zero errors in order to ensure that every step they take is correct and effective. Customer satisfaction is strayed from the departments which are in contact with the customers and appeared in every aspect of production and service.
    [Show full text]
  • A Review on Current Status of Facility Management Practices in Building
    Proceedings of the 5th NA International Conference on Industrial Engineering and Operations Management Detroit, Michigan, USA, August 10 - 14, 2020 A Review on Current Status of Facility Management Practices in Building Industry and Prospective BIM Intervention to Manage the Facilities Effectively during its Service Life Abdulaziz Aldowayan, Fikri T. Dweiri Department of Industrial Engineering and Engineering Management University of Sharjah Sharjah, UAE [email protected],[email protected] Senthilkumar Venkatachalam Construction Engineering and Management Indian Institute of Technology Palakkad Kerala, Palakkad , India [email protected] Abstract BMS are deployed to manage buildings such as Shopping malls, office, and residential complexes. However, the information needed for their efficient functioning are either incomplete, generated separately, or hard to determine. BIM generates and stores useful integrated information during design and construction phases of the building projects. These Information are well utilized during design and construction stages but their usage in FM stage is limited. The guidelines and standards to facilitate BIM model during design and construction stages, are not considered critically usable. Hence, this paper aims to identify the need for crucial asset information during FM practices while executing the BMS process, to develop a standard framework for information specifications during the early development of BIM model, and utilize the same as a source for BMS in FM processes. Nevertheless, this paper addresses the common FM practices and its building data requirements towards efficient BMS implementation pivotal to the mechanical and electrical systems for a conceptual framework of a BIM model. The research adopts deductive approach through semi- structured qualitative interviews with FM stakeholders of the malls in Saudi Arabia to obtain the standard FM data requirement from client perspective, while managing the FM process through a BMS system.
    [Show full text]
  • Read the Report
    Relating Facility Performance Indicators with Organizational Sustainability Performance in Public Higher Education Facilities A Thesis Presented to The Academic Faculty by Gregory K. Adams In Partial Fulfillment of the Requirements for the Degree Master of Science in Building Construction and Integrated Facility Management in the College of Architecture Georgia Institute of Technology May 2010 Copyright 2010 by Gregory K. Adams Relating Accepted Facility Performance Indicators with Organizational Sustainability Performance in Georgia Public Higher Education Facilities Approved by: Professor Kathy Roper, Advisor College of Architecture Georgia Institute of Technology Dr. Daniel Castro-Lacouture College of Architecture Georgia Institute of Technology Dr. Linda Thomas-Mobley College of Architecture Georgia Institute of Technology Date Approved: March 19, 2010 This work is dedicated to the memory of my father, Edward S. “Jack” Adams, the smartest man I ever knew not to have received a college education who, more than any other, inspired and taught me to think critically, and to my mother, Arah E. Adams, whose love and support for me is as fresh today as the day she brought me to this world all these fifty-four years ago. ACKNOWLEDGEMENTS I wish to thank my wife, Maria Guadalupe Alonzo Adams, who made innumerable sacrifices so that I could complete this work, and my sons, Jack and Gary, who have supported their father in the pursuit of his education at the expense of time that would have otherwise been spent with them. My employer, the University System of Georgia, is to be commended for providing employees such as me the opportunity to perform this kind of research, and for supporting them through it.
    [Show full text]
  • High Performance Buildings Need High Performance FM - How Does Your Organization Rate?
    High Performance Buildings Need High Performance FM - How does your organization rate? By; Christopher P. Hodges, P.E., CFM, LEED-AP, IFMA Fellow, FRICS Introduction We’ve done a good job of defining what constitutes a high-performance building, but how do we keep our buildings in top performing shape? A building will remain high-performance only if the facility manager has the knowledge, skills and ability to keep it there. The facility manager is the key to operational efficiency, and is the one individual that has a working knowledge of the bricks and mortar, and of the political, economic, and environmental climate that exists within their organization. By arming facility managers with a toolkit of sustainable practices, we enable them to adopt and adapt sustainable practices to his or her unique environment. Facility managers can create alignment between organizational strategy and the delivery of economical, safe and productive work environments. High-performance buildings are kept in good working order through a commitment to high-performance facility management. For the characteristics of a high-performance organization, we can turn to recent management literature that defines those characteristics. Once we have committed to improving both the organization and the assets that are managed, we can truly define the most important metrics that define and maintain a building as “high-performance”. This presentation addresses the convergence of the characteristics that define high-performance in both the building and in the facility management organization that is managing them. By exploring and managing these key characteristics effectively, we can keep a facility running in top condition, creating safe, healthy, and productive work environments, while saving energy and resources, and operating in a cost effective manner.
    [Show full text]
  • Designing of Facilities Management Sustainable Parameters for Improving Operational Efficiency
    ISSN 1816-6075 (Print), 1818-0523 (Online) Journal of System and Management Sciences Vol. 7 (2017) No. 4, pp. 53-78 Designing of Facilities Management Sustainable Parameters for Improving Operational Efficiency Rashidul Islam1, Sarajul Fikri Mohamed1, Abdul Bari Amin2* and Tasnia 3 Hassan Nazifa 1Faculty of Built Environment, UTM, Skudai 81310, Johor Bahru, Malaysia 2University of Bridgeport, Bridgeport, CT 06604, USA 3Faculty of Civil Engineering, UTM, Skudai 81310, Johor Bahru, Malaysia Email: [email protected] Abstract. Sustainability practice in facilities management (FM) is becoming a crucial principle throughout the life-cycle of project development mainly at post-occupancy phase. FM collaboration would be productive to support sustainability through improvement of sufficient training and skills coupled with practice culture between designers and facility managers. Systematic review of literature and questionnaire survey was conducted to establish the most important design parameters, and these were separated into four categories of people, process, economy and social. Statistical package for the social sciences (SPSS) and relative significance index (RSI) with rank analysis techniques were then used to further explore the significance and influence of each design parameters in sustainable practice of FM. The top five most design parameters were recognised and highlighted in the design process included: “cost-effectiveness”, “value of asset” “environmental” and “practiced culture”. Finally, “design adaptability” and “health and safety”. The study concludes with development of a conceptual model for integration of design parameters to guide facility managers for appropriate actions. Keywords: Facilities Management; Sustainable Design; SPSS; RSI; Malaysia 1. Introduction Traditionally, the principal focus of FM has long time been on controlling and reducing cost for physical asset and now changed towards the creating added value (Jensen and van der Voordt 2016).
    [Show full text]
  • Top Trends in Facilities Management How Society, Demographics and Technology Are Changing the World of FM
    Top trends in facilities management How society, demographics and technology are changing the world of FM TOP TRENDS IN FACILITIES MANAGEMENT Contents Foreword: a world of opportunity 02 Top trends in FM: a summary 04 The changing face of outsourcing Outsourcing evolution 06 Integrated services 09 The new workplace The multi-generational workplace 10 Wellness 12 Collaboration 13 Digital disruption and the portfolio Managed workspace and co-working 14 Personalisation 16 Smart technology and artificial intelligence The smart workplace 18 Data-driven decision making 21 The rise of the robots 22 Conclusion 24 1 FOREWORD: A WORLD OF OPPORTUNITY Foreword: a world of opportunity Talking to clients I’m often struck by how fast the world of facilities management is changing. Global influences such as demographic and social changes are contributing to a shift in how the workplace is viewed and what people expect from it. Increasingly people want to choose Wellness in the workplace is one where and when they work and they look to response and is seen as a key way the workplace – wherever that may be – to of attracting and keeping key talent. deliver much more in the way of services and amenities. Every day it seems technology is In these days of disruption and pushing the boundaries of what real estate disintermediation there’s a constant can deliver for organisations. pressure on organisations to innovate and here too, the workplace has an All of which means that facilities important role to play, supporting management is transforming: from an asset, collaboration and boosting creativity. building and plant-centred activity to one which focuses on end-users and outcomes.
    [Show full text]
  • A Centralized Treasury Management Solution
    CASE STUDY A Centralized Treasury Management Solution KEY RESULTS • Consistency across four regional ABOUT treasury centres Computershare Limited is the world’s largest stock transfer • Replacement of operationally risky company and provides corporate trust, stock transfer and spreadsheet-based systems employee share plan services in a number of different countries. The company currently has offices in 20 countries, including • Much faster consolidated reporting at Australia, the United Kingdom, Ireland, the United States, Canada, a global level the Channel Islands, South Africa, Hong Kong, New Zealand, • Positioned for automated treasury Germany, and Denmark. accounting • Reduction of key-person risk The Challenge The Results Computershare sought to deploy a TMS across its regional Streamline the Fx dealing process: This required the capture treasury centres. The intention was to replace a combination of internal deal requests from business units and clients in of systems and spreadsheets with one centralized treasury the system. Computershare could then view net hedging management system (TMS) to reduce operational risks, requirements before deciding on a hedging strategy. Having achieve efficiencies and improve reporting. transacted a hedge, the system would then allocate the contract against the request. Consolidated reporting across FX positions The Solution was generated by the system, enabling Computershare to monitor their positions by client. Throughout a comprehensive selection process GTreasury was considered against competitive offerings and was selected Investment portfolio management: GTreasury’s investment based on the ability to demonstrate: management supported the placing of both vanilla and • Proven credibility as a reliable and longstanding local vendor structured deposits to increase the return on Computershare’s excess liquidity.
    [Show full text]
  • Leadership Based Accountability for Facilities Management by Thor
    Leadership Based Accountability for Facilities Management by Thor Tellefsen A Thesis Presented in Partial Fulfillment of the Requirements for the Degree Master of Science Approved July 2011 by the Graduate Supervisory Committee: Kenneth Sullivan, Chair Dean Kashiwagi William Badger ARIZONA STATE UNIVERSITY August 2011 ABSTRACT Facility managers have an important job in today's competitive business world by caring for the backbone of the corporation's capital. Maintaining assets and the support efforts cause facility managers to fight an uphill battle to prove the worth of their organizations. This thesis will discuss the important and flexible use of measurement and leadership reports and the benefits of justifying the work required to maintain or upgrade a facility. The task is streamlined by invoking accountability to subject experts. The facility manager must trust in the ability of his or her work force to get the job done. However, with accountability comes increased risk. Even though accountability may not alleviate total control or cease reactionary actions, facility managers can develop key leadership based reports to reassign accountability and measure subject matter experts while simultaneously reducing reactionary actions leading to increased cost. Identifying and reassigning risk that are not controlled to subject matter experts is imperative for effective facility management leadership and allows facility managers to create an accurate and solid facility management plan, supports the organization’s succession plan, and allows the organization to focus on key competencies. i DEDICATION This thesis is dedicated to my wife Jennifer and my sons Erik and Tyler for allowing me to complete this feat while staying grounded in family functions and affairs.
    [Show full text]
  • V3DM+: BIM Interactive Collaboration System for Facility Management Wan-Li Lee1, Meng-Han Tsai2*, Cheng-Hsuan Yang3, Jhih-Ren Juang1 and Jui-Yu Su1
    Lee et al. Visualization in Engineering (2016) 4:5 DOI 10.1186/s40327-016-0035-9 CASE STUDY Open Access V3DM+: BIM interactive collaboration system for facility management Wan-Li Lee1, Meng-Han Tsai2*, Cheng-Hsuan Yang3, Jhih-Ren Juang1 and Jui-Yu Su1 Abstract Background: Facility management (FM) is an important phase in the building lifecycle. Although building information modeling (BIM) technology has been widely used in the design and construction phase, efforts to transferinformationtotheFMphasearestillinthenascent stage. A good BIM-to-FM tool should be able to inherit and integrate the building information built in the design and construction phase as well as be able to provide a platform for managers to browse the information, discuss potential problems, and arrange maintenance work. Methods: In this research, a BIM interactive collaboration system for FM is designed and implemented. Two modules were developed for optimizing the BIM system in the FM phase: the data arrangement module, which has functionalities of data importing and processing, and the data presentation module, which provides functionalities of data revealing and collaboration. Result: From the results of an accessibility analysis, we verified that the developed system, V3DM+, can be implemented on real projects. Managers can use V3DM+ to support operation and maintenance of buildings. Moreover, a web-based platform allows users to manage facilities intuitively without investing on professionals or specialized software. Concluding: The proposed system, V3DM+, provides a data arrangement module to integrate building information constructed by various types of commercial software and present them in a visual manner. The user can find the required information, initiate a discussion on an issue, or arrange operation and maintenance tasks directly on this system.
    [Show full text]
  • Collaborative Decision Support Systems for Facility Management
    FE Collaborative Decision Support Systems for Facility Management Arthur J. Chapman President COM Technologies. Inc 2975 McMillan Ave. Suite 272 San Luis Obispo, CA 93401 Email: [email protected] Abstract Agent-based collaborative decision support is a methodology of utilizing domain specific intelligent systems, interacting in a common environment, to partner with one or more human decision makers to reach a consensus solution to a complex problem. An example is the recently developed Collaborative Infrastructure Assessment Tool (CIAT) that provides a collaborative planning facility management tool in support of military pier and port management. This methodology is applicable to many similar dynamic facility management problems where the complexity of issues and the number of decision makers result in the need for domain specific agents, a common view of the data, and the need to reach a consensus solution. Keywords agents, collaborative planning, consensus solution, decision support, facilities management, infrastructure assessment, knowledge base, problem solving, Decision Support Data Decision support is one of the most talked about and least implemented topics in the computer world today. It is generally built around a data warehousing component where corporate or institutional data are centralized and sanitized for general distribution. This is coupled with a variety of presentation programs that allow the slicing and dicing of data fields with the goal of providing users with every imaginable presentation option. The data collection and presentation process has unfortunately absorbed most corporate or institutional organizations and makes difficult their ability to evolve into decision support, whereby data are combined with operational rules and structured into a collaborative decision making system.
    [Show full text]
  • Holistic Business Process Management
    HOLISTIC BUSINESS PROCESS MANAGEMENT 10442hc_9789813209831_tp.indd 1 13/1/17 4:00 PM Japanese Management and International Studies (ISSN: 2010-4448) Editor-in-Chief: Yasuhiro Monden (University of Tsukuba, Japan) Published Vol. 4 International Management Accounting in Japan: Current Status of Electronics Companies edited by Kanji Miyamoto Vol. 5 Business Process Management of Japanese and Korean Companies edited by Gunyung Lee, Masanobu Kosuga, Yoshiyuki Nagasaka & Byungkyu Sohn Vol. 6 M&A for Value Creation in Japan edited by Yasuyoshi Kurokawa Vol. 7 Business Group Management in Japan edited by Kazuki Hamada Vol. 8 Management of an Inter-Firm Network edited by Yasuhiro Monden Vol. 9 Management of Service Businesses in Japan edited by Yasuhiro Monden, Noriyuki Imai, Takami Matsuo & Naoya Yamaguchi Vol. 10 Management of Enterprise Crises in Japan edited by Yasuhiro Monden Vol. 11 Entrepreneurship in Asia: Social Enterprise, Network and Grossroots Case Studies edited by Stephen Dun-Hou Tsai, Ted Yu-Chung Liu, Jersan Hu & Shang-Jen Li Vol. 12 Lean Management of Global Supply Chain edited by Yasuhiro Monden & Yoshiteru Minagawa Vol. 13 Management of Innovation Strategy in Japanese Companies edited by Kazuki Hamada & Shufuku Hiraoka Vol. 14 Holistic Business Process Management: Theory and Practice edited by Gunyung Lee, Masanobu Kosuga & Yoshiyuki Nagasaka For the complete list of titles in this series, please go to http://www.worldscientific.com/series/jmis Alisha - 10442 - Holistic Business Process Management.indd 1 16-05-17 3:17:27 PM Japanese Management and International Studies – Vol. 14 HOLISTIC BUSINESS PROCESS MANAGEMENT editors Gunyung Lee Niigata University, Japan Masanobu Kosuga Kwansei Gakuin University, Japan Yoshiyuki Nagasaka Kwansei Gakuin University, Japan World Scientific NEW JERSEY • LONDON • SINGAPORE • BEIJING • SHANGHAI • HONG KONG • TAIPEI • CHENNAI • TOKYO 10442hc_9789813209831_tp.indd 2 13/1/17 4:00 PM Published by World Scientific Publishing Co.
    [Show full text]
  • Operations and Maintenance
    Operations and Maintenance BENCHMARKS for Health Care Facilities Report OperatiOns and maintenance benchmarks fOr health care facilities Committee Tim Adams, FASHE, CHFM, CHC, Director, Member Professional Development, American Society of Healthcare Engineering Shari Epstein, CAE, Director, Research, International Facility Management Association William L. Gregory, IFMA Fellow, PE, CFM, Vice President Facility Management, Adelphoi USA Todd Wilkening, VP Research, IFMA Health Care Council © Copyright 2010 by the International Facility Management Association. All rights reserved. This publication may not be reproduced, stored in a retrieval system or transmitted in whole or part, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the written permission of the International Facility Management Association. For more information, please contact: IFMA Research Department 1 East Greenway Plaza, Suite 1100, Houston, TX 77046-0104, USA Phone: +1-713-623-4362 Fax: +1-713-623-6124 E-mail: [email protected] ISBN 1-883176-82-4 Operations and Maintenance BENCHMARKS for Health Care Facilities Report Table of Contents intrOductiOn Using This Report 7 About this Report 7 Methodology 7 Definitions for Operations and Maintenance 9 Benchmarks for Health Care Facilities Report sectiOn 1: facility descriptiOn Industries Represented 13 Facility Description 13 Location of Hospital 14 Hospitals by Region 14 Climate Zones for the United States and Canada 15 Facility Age 16 Facility Setting 16 Ownership 17 Developed
    [Show full text]