DOCSLIB.ORG

M Ou Ld in G Referen C Eg U Id E

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
M Ou Ld in G Referen C Eg U Id E MOULDING REFERENCE GUIDE A Selection of our Most Popular Profiles This guide has been designed to make the process of selecting the appropriate moulding for your project easier, so you can fi nish more quickly. It contains a small selection of our most popular moulding profi les, all manufactured at our mill in British Columbia. These products are generally stocked in Ultralite, fi nger-joint pine, poplar, fi r, oak and maple. Please inquire about other species and primed products. CROWN FRIEZE BACK BAND CASING HEADER ROSETTE STOP & SCREEN WINDOW STOOL CHAIR RAIL COVE & OUTSIDE CORNER PANEL MOULD ROUND WALL PANEL BASEBOARD BASE SHOE PLINTH BLOCK 1 CEILING ACCRA CLASSIC & DESIGNER PROFILES CROWN FT 425 9/16" x 2-15/16" 14mm x 75mm FT 415 3/4" x 3-1/4" 19mm x 83mm FT 413a 1-1/16" x 4-7/16" 27mm x 113mm FT 412 3/4" x 4-1/2" 19mm x 114mm FT 413b 1-1/4" x 6-1/2" 32mm x 165mm ADM 473 13/16" x 5-1/2" 21mm x 140mm FT 437 1-1/8" x 7-1/4" 29mm x 184mm FT 421 1-1/16" x 6-13/16" 27mm x 173mm ACCRA WOOD PRODUCTS | accrawood.com 2 Crown moulding is used as a transition from the CROWN wall to the ceiling. A frieze is the decorative band along the upper CEILING FRIEZE part of the wall, usually below a crown. FT 400 3/8" x 1/2" 10mm x 13mm FT 417a 27/32" x 3-9/16" 21mm x 90mm FT 409 1-1/16" x 1-5/16" 27mm x 33mm FT 410 1/2" x 2-1/8" 38mm x 54mm FT 417b 1-1/8" x 5" 29mm x 125mm FT 403 1/2" x 3/4" 13mm x 19mm FT 404 11/16" x 1-1/4" 17mm x 32mm FT 428 9/16" x 3-1/4" 14mm x 83mm FT 405 5/8" x 1-5/8" 16mm x 41mm ADM 451 13/16" x 4-7/16" 21mm x 113mm FT 406 1-1/16" x 2-1/4" 27mm x 57mm FT 408 5/8" x 1-1/2" 16mm x 38mm All products are displayed at 30% of their actual size. Dimensions may vary. 3 CEILING ACCRA DESIGNER & COMPOSITE PROFILES CROWN ADM 453 3/4" x 4-1/8" 19mm x 105mm ADM 455 3/4" x 3-3/4" 19mm x 95mm ADM 458 13/16" x 4-7/16" 21mm x 113mm ADM 456 13/16" x 5-1/2" 21mm x 140mm ADM 460 3/4" x 3-11/16" 19mm x 94mm ADM 457 27/32" x 5-3/16" 21mm x 132mm ACM 5400 1" x 7-1/8" 25mm x 181mm ACM 5405 1-1/16" x 6" 27mm x 152mm ACCRA WOOD PRODUCTS | accrawood.com 4 Crown moulding is used as a transition from the CROWN wall to the ceiling. A frieze is the decorative band along the upper CEILING FRIEZE part of the wall, usually below a crown. FRIEZE ACM 5420 1" x 5-1/2" 25mm x 140mm ACM 5800 15/16" x 5-1/2" 24mm x 140mm ACM 5425 1" x 5-1/2" 25mm x 140mm ACM 5805 7/8" x 5-1/2" 22mm x 140mm ACM 5435 1" x 5-1/4" 25mm x 133mm ACM 5810 7/8" x 5-1/2" 22mm x 140mm ACM 5430 1-1/16" x 4-1/2" 27mm x 114mm All products are displayed at 30% of their actual size. Dimensions may vary. 5 DOOR & WINDOW ACCRA CLASSIC & DESIGNER PROFILES CASING FT 100 1/2" x 1-9/16" 13mm x 40mm FT 108 11/16" x 2-1/2" 17mm x 64mm FT 137 1-1/8" x 4" 29mm x 102mm FT 101 7/16" x 2-1/4" 11mm x 57mm FT 109 5/8" x 3-1/2" 16mm x 89mm FT 150a 1/2" x 2-1/4" 13mm x 57mm FT 102b 7/16" x 2-1/4" 11mm x 57mm FT 110 11/16" x 3-1/4" 17mm x 83mm FT 150b 1/2" x 3-1/4" 13mm x 83mm FT 104 5/8" 2-1/4" 16mm x 57mm FT 106 3/4" x 2-1/2" 19mm x 64mm FT 112 1-7/32" x 3-1/4" 31mm x 83mm ADM 154 13/16" x 3-1/4" 21mm x 83mm FT 107 3/4" x 2-5/8" 19mm x 67mm FT 113 1" x 3-5/16" 25mm x 84mm FT 8063 11/16" x 3-1/4" 17mm x 83mm ACCRA WOOD PRODUCTS | accrawood.com 6 BACK BAND A back band builds up casing or baseboard. A rosette is used in place of a mitred corner ROSETTE around doors and windows. Casing is used to frame doors and windows, CASING covering the gap between the jamb and drywall. STOP & Stop and screen moulding prevents the door or SCREEN screen from passing through the opening. A header replaces the top casing, refl ecting a HEADER Victorian or Federal style. WINDOW The window stool replaces the bottom casing STOOL and is often used with a window liner and header. WINDOW STOOL HEADER DOOR & WINDOW FT 1106 7-1/4" x 1-3/16" 184mm x 30mm FT 5000 1-3/16" x 3-3/4" 30mm x 95mm FT 1105 5-1/4" x 1-3/16" 133mm x 30mm FT 1108 7-5/16" x 1-3/4" 186mm x 44mm FT 5010 1-3/16" x 4-1/4" 30mm x 108mm FT 1107 5-3/8" x 1-3/4" 137mm x 44mm F T 1117 7-1/8" x 1-1/4" 181mm x 32mm FT 5020 1-3/16" x 5-1/4" 30mm x 133mm STOP & SCREEN FT 505 3/4" x 3/16" 19mm x 5mm FT 515 1-1/4" x 5/16" 32mm x 8mm FT 509 3/4" x 1/2" 19mm x 13mm FT 516 1-1/2" x 5/16" 38mm x 8mm FT 513 1-1/4" x 11/32" 32mm x 9mm FT 518 2-1/4" x 5/16" 57mm x 8mm FT 5040 1-3/16" x 5-1/4" 30mm x 133mm All products are displayed at 30% of their actual size. Dimensions may vary. 7 DOOR & WINDOW ACCRA DESIGNER & COMPOSITE PROFILES CASING ADM 150 13/16" x 3-1/4" 21mm x 83mm ADM 172 13/16" x 3-1/4" 21mm x 83mm ADM 174 13/16" x 3-1/4" 21mm x 83mm ADM 151 13/16" x 3-1/4" 21mm x 83mm ADM 176 13/16" x 3-1/4" 21mm x 83mm ADM 157 13/16" x 3-1/4" 21mm x 83mm ADM 158 13/16" x 3-1/4" 21mm x 83mm ADM 177 13/16" x 4" 21mm x 102mm ADM 170 13/16" x 3-1/4" 21mm x 83mm ADM 178 13/16" x 4-1/2" 21mm x 114mm ACCRA WOOD PRODUCTS | accrawood.com 8 BACK BAND A back band builds up casing or baseboard. A rosette is used in place of a mitred corner ROSETTE around doors and windows. Casing is used to frame doors and windows, CASING covering the gap between the jamb and drywall. STOP & Stop and screen moulding prevents the door or SCREEN screen from passing through the opening. A header replaces the top casing, refl ecting a HEADER Victorian or Federal style. WINDOW The window stool replaces the bottom casing STOOL and is often used with a window liner and header. ROSETTE DOOR & WINDOW ADM 802 7/8" x 3-1/2" x 3-1/2" ACM 5105 1-1/16" x 4-7/16" 27mm x 113mm ADM 803 22mm x 89mm x 89mm 7/8" x 4-1/2" x 4-1/2" 22mm x 114mm x 114mm ADM 800 7/8" x 2-1/2" x 2-1/2" 22mm x 64mm x 64mm ACM 5110 1" x 3-3/4" 25mm x 95mm ADM 801 7/8" x 2-3/4" x 2-3/4" 22mm x 70mm x 70mm BACK BAND ACM 5115 15/16" x 3-9/16" 24mm x 90mm ACM 5700 1-3/4" x 2-1/2" 44mm x 64mm 2" x 2" 51mm x 51mm ACM 5120 15/16" x 3-9/16" 24mm x 90mm ACM 5705 ACM 5710 1-15/16" x 2" 49mm x 51mm All products are displayed at 30% of their actual size. Dimensions may vary. 9 WALL ACCRA CLASSIC PROFILES PANEL MOULD COVE & OUTSIDE CORNER ROUND FT 700 1/2" x 1/2" 13mm x 13mm FT 715 1/2" x 1/2" 13mm x 13mm FT 301 3/4" x 1-3/16" 19mm x 30mm FT 701 3/4" x 3/4" 19mm x 19mm FT 716 3/4" x 3/4" 19mm x 19mm FT 302 7/8" x 3/4" 22mm x 19mm FT 720 3/8" x 3/4" 10mm x 19mm FT 703 3/4" x 3/4" 19mm x 19mm FT 303 7/8" x 25/32" 22mm x 20mm FT 721 1/2" x 1" 13mm x 25mm FT 704 1" x 1" 25mm x 25mm FT 722 3/4" x 1-1/2" 19mm x 38mm FT 307 1-1/4" x 2" 32mm x 51mm FT 705 3/4" x 3/4" 19mm x 19mm FT 710 3/4" 19mm FT 308 3/8" x 11/16" 10mm x 17mm FT 706a 1" x 1" 25mm x 25mm FT 315 7/16" x 1" 11mm x 25mm FT 707 1-1/2" 38mm FT 706b 1-5/16" x 1-5/16" 33mm x 33mm FT 311 11/16" x 1-5/8" 17mm x 41mm FT 317 7/16" x 13/16" 11mm x 21mm FT 312 3/4" x 1-1/8" 19mm x 29mm ACCRA WOOD PRODUCTS | accrawood.com 10 A chair rail is used on its own or as part of wall Rounds are the most versatile moulding.
Load more

Recommended publications
  • Technical Specifications (Interior Works)
    DEVELOPMENT OF PERMANENT CAMPUS OF NU RAJGIR. PAKAGE 8A INTERIOR TENDER FOR NALANDA PHASE 1 FOR NALANDA UNIVERSITY, AT RAJGIR, BIHAR. TECHNICAL SPECIFICATIONS (INTERIOR WORKS) Client: NU TECHNICAL SPECIFICATIONS Page 1 of 100 DEVELOPMENT OF PERMANENT CAMPUS OF NU RAJGIR. Item No. 1. Wooden Slats Wall Panelling Supply & installation of wall panelling made of pinewood E1 grade fiberboard, melamine/veneer laminated finish, groove perforated L32-2 - (2mm grooves @ 32mm centers), backlined with Sound texblack acoustical fleece, tongue-groove edge for a seamless look, 5-test fire retardant grade/ Non FR, Acoustics NRC 0.65- 0.75 (For E300* Mounting), size 128x2440x16mm, volume density of base board 800 - 830 Kg/m3, 10-10.5Kgs/m2 (L32), installed by using Strut framework system. Slats to be backed with Synthethik PF 10x25 adhered to wall with stick .The Panneling shall be finished as per the drawings and to the satisfaction of the Engineer in Charge. All the support system shall be as per the Approved make list and the suspension system shall be got approved before starting installation at site. Materials: The material shall be High density fiber board slats having the total width of 128 mm with thickness of 16 mm. Each individual smaller division should be at least 28 mm with perforation in the gap between. The Wooden Slats perforated wall paneling shall have width of 128mm, thickness of 15mm and length 2440 mm or as required by the Architect/ engineer In Charge, made of a high density fiber board with minimum 830 Kg/M3 density substrate with a wood veneer as per the approved species from available option and a melamine balancing layer on the reverse side.
    [Show full text]
  • Code of Practice for Wood Processing Facilities (Sawmills & Lumberyards)
    CODE OF PRACTICE FOR WOOD PROCESSING FACILITIES (SAWMILLS & LUMBERYARDS) Version 2 January 2012 Guyana Forestry Commission Table of Contents FOREWORD ................................................................................................................................................... 7 1.0 INTRODUCTION ...................................................................................................................................... 8 1.1 Wood Processing................................................................................................................................. 8 1.2 Development of the Code ................................................................................................................... 9 1.3 Scope of the Code ............................................................................................................................... 9 1.4 Objectives of the Code ...................................................................................................................... 10 1.5 Implementation of the Code ............................................................................................................. 10 2.0 PRE-SAWMILLING RECOMMENDATIONS. ............................................................................................. 11 2.1 Market Requirements ....................................................................................................................... 11 2.1.1 General ..........................................................................................................................................
    [Show full text]
  • A Timber-Framed Building at No. 302 Lawnmarket, Edinburgh
    Anne Crone and Diana Sproat Revealing the History Behind the Facade: A Timber-framed Building at No. 302 Lawnmarket, Edinburgh The property at No. 302 Lawnmarket, Edinburgh, is a rare survival of a ‘timber land’, the timber-framed buildings that were once commonplace along the city’s Royal Mile and elsewhere in Scotland in the late sixteenth and seventeenth centuries. Two painted panels survive as components of the timber frontage, providing insights into the nature and function of the galleries that projected from these buildings. The building also retains fragments of two richly decorated board-and-beam ceilings, the beams of which have been successfully dated by dendrochronology. One possible interpretation of the dendrochronological results is that multi-storied tenements such as No. 302 may not have been conceived as such but were built upwards in stages, the platform-framing of the box-like construction allowing for storey-by-storey development. Background Between 2006 and 2008, AOC Archaeology Group undertook a detailed survey of Nos. 302–304 Lawnmarket, two Category A listed tenement buildings located within the Old Town of Edinburgh. The work was undertaken as part of a planning condition for the redevelopment of a large plot located at the junction between George IV Bridge and the Lawnmarket, now the Missoni Hotel. The buildings have now been incorporated into this development, with shops on the ground floor and hotel accommodation on the upper levels (Figure 1). As with many of the medieval tenements along the Royal Mile, the buildings have, throughout their history, provided commercial premises on their ground floors and basements, and accommodation in the upper floors.
    [Show full text]
  • 2017BROCHURE EN Digital Lowres
    We are Wonderwall Studios. This is our story. UPCYCLE HONESTY CRAFTMANSHIP Wonderwall Studios is a creative studio that designs and produces wooden panelling for walls and surfaces. We use exclusively salvaged wood and employ local professional craftsmen. You could say we craft locally and rock globally. FUTURE EXPLORE DEVOTED OUR PHILOSOPHY At Wonderwall Studios we believe strongly in taking proper care of the communities we work in and the people we work with. The local craftsmen we work with are professional carpenters and tradesmen. We pay an honest wage for an honest days work. And we treat everyone as we would our own family and friends. The woods we use are therefore exclusively salvaged from abandoned houses, derelict sheds, rail road-sleepers, naturally fallen trees and old floors. Anything goes really, as long as it’s reclaimed. We are all about joyous materials and sustainability through reclamation. OUR PRODUCTION AND DESIGN PROCESS We keep everything we do in-house: From the reclamation of the wood to the design, marketing and selling of the collection. Of course we do everything we do with great care. But it’s our design process that we are particularly fond and proud of. During our searches for suitable wood, we always keep our eyes open for any new trends and styles. Fully inspired we head back home or to the workshop and let the creative juices flow. We sketch, doodle, draw and throw stuff at the wall and we discuss our design ideas with the woodworkers. They’ll tell us which wood type will work best for each design.
    [Show full text]
  • Planning Document for New Builds STEICO Construction System
    Planning document for new builds STEICO construction system Construction elements - made naturally out of wood Planning and construction Contents STEICO external wall ������������������������������������������8 STEICO internal wall ������������������������������������������9 STEICO floor ���������������������������������������������������� 10 STEICO pitched roof������������������������������������������11 engineered by nature Planning document for new builds To build with wood is to build with nature. Benefits for enhanced living comfort and climate protection Made from natural wood STEICO products are made from virgin, Polish softwood – featuring all the best natural prop- erties� Protects against cold weather Timber houses built with the STEICO construc- tion system are exceptionally energy-efficient and economical to run� Protects against hot weather The STEICO construction system locks out the summer heat, helping you to stay cool on hot days� STEICO wood fibre insulating materials have high heat storage capacity and so provide the best protection against summer heat� Active climate protection 1 kg of wood contains 1�2 kg of CO2� This CO2 is permanently removed from the atmosphere� Natural healthy living STEICO wood fibre insulation helps to regulate room humidity� STEICO insulations contain no potentially harmful additives and hence are ideal for people who suffer from sensitivities or allergies� 2 STEICO construction system Planning document for new builds Our experience is your safety. We understand the importance of safety The
    [Show full text]
  • Providing and Fixing Pre-Laminated Flat Pressed 3
    UNIVERSITY OF KERALA ENGINEERING UNIT, KARIAVATTOM Tender schedule for the Civil works for setting up of computer lab in the Department of Education, Thycaud Thiruvananthapuram Sl.No. Quantity Specification Unit Rate Rate in words Amount 1.00 95.00 Providing and fixing Pre-laminated flat pressed 3 layer m2 1762.97 Rs.One thousand Seven 167,482.15 (medium density) particle board or graded wood particle board hundred & Sixty Two & ps. IS : 3087 marked, with one side decorative and other side Ninety Seven only balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick 2.00 250.00 Providing and fixing 2nd class teak wood lipping/ moulded m 90.64 Rs.Ninety & ps. Sixty Four only 22,660.00 beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. 3.00 45.00 Providing and fixing powder coated telescopic drawer channels pair 291.80 Rs.Two hundred & Ninety one 13,131.00 300 mm long with necessary screws etc. complete as per & ps. Eighty only directions of Engineer in charge. 4.00 200.00 Supplying and fixing oxidized/galvanised mild steel clamps (L E 28.00 Rs.Twenty Eight only 5,600.00 shaped) each side having minimum 5 cm length and width 15 mm , 2 mm minimum thickness fixing with screws in every junction of particle boards as per departmental direction.
    [Show full text]
  • Moulding & Millwork Profile Guide
    Moulding & Millwork Profile Guide FIRST EDITION Create your own custom look from the best selection! Table of Contents 1 Table of Contents 2 Illustration 3 Case / Base Combinations 4 Case / Base Combinations Your Best Source for 5 Case / Base Combinations 6 Case / Base Combinations 7 Case / Base Combinations 8 Case / Base Combinations 9 Case / Base Combinations 10 Case / Base Combinations 11 Case / Base Combinations 12 Case / Base Combinations ARCHITRAVE 13 Case / Base Combinations Brickmoulds and Cant Strip 14 Panel Moulds, Coves and Quarter, Half & Full Rounds INSIDE 15 Chair Rails, Corners & Squares CORNER 16 Stops & Battens and Handrails 17 Misc. Profiles 18 Crowns 19 Crowns 20 Crowns MANTEL BUILD UP 21 Finish Lumber (S4S) 22 Embossed Pre-Finish and FLUTED Door Jambs MOULDING 23 Build-ups 24 Build-ups 25 Build-ups, Case/Base Combos PANEL MOULD 26 Glossary of Terms CHAIR RAIL BUNDLE COUNT PROFILE 908 BDL 9/16” x 3-1/4” Ultralite 7 PROFILE SIZES PLINTH PROFILE SPECIES BLOCK • Quality • Service 1 • Selection Mouldings, Finish Lumber, & Jambs CROWN BUILD UP OUTSIDE CORNER FLUTED CASING MOULDED CASING CASING BUILD-UP DENTIL CROWN ROSETTE CHAIR RAIL WAINSCOT CAP HANDRAIL LARGE FLUTED MOULDING SHADOW BOX WAINSCOT PANELLING BASE CAP S4S BASE SHOE MOULDED BASEBOARD Note: this illustration is representative only and is an aid in demonstrating some of the many moulding applications possible 2 Profile Guide Case / Base Combinations ALL SIZES NOMINAL 411 BDL 5/8” x 3” VG Fir 10 410 BDL 11/16” x 3” Hemlock 6 11/16” x 2-1/4” Hemlock 8 3/4” x 3” Ultralite
    [Show full text]
  • 2014 Greater Houston Reuse Contest Art and Furniture Category
    2014 GREATER HOUSTON REUSE CONTEST ART AND FURNITURE CATEGORY Judges: Mayor Annise Parker, City of Houston Harry Hayes, Chief Operating Officer, Director of the Dept. of Solid Waste Management Dan Phillips, Founder, Phoenix Commotion FIRST PLACE - ART AND FURNITURE CATEGORY Kiki Neumann Repurposed Art Studio Folk Artist Kiki Neumann has used cast off materials found from the streets of Houston for over 17 years. Her mission was to make a repurposed art studio for 4 other artists to use and rent. The entire 1800 sq ft metal warehouse that she already owned was converted to 6 total studios. With her own money and no financing she built out a 2 story studio where it once was just an open one room space which was originally 24 foot high. Then as a finishing touch, Kiki built a kitchen and bathroom area entirely out of found materials. That included baseball bats for the stair spindles, yardsticks for the sliding bathroom door and license plate kitchen counter tops. Paintbrushes were the drawer pulls and ladder rungs were the coffee cup holders. Downstairs all the doors were made from yardsticks or found corrugated greenish colored tin. The only money spent was for appliances and lighting. It's a colorful happy break area for the artists tucked away under the staircase. Mission accomplished and it is ever changing with more cast off materials as they are found ( like vintage bottle openers adorning the stair risers....need a drink opened???) Recycled items used: License Plates, Yardsticks, Reclaimed wood ( of course), Paintbrush drawer pulls, Baseball Bats Bottle openers,Ladders, Scrabble words used throughout ( like WASH YOUR HANDS!), Coke Cartons wooden, Pressed tin, Corrugated tin, Used mirror, Barnwood, Bottle openers, Thrift store cups and kitchen utensils, Coffee bean sack canvas bags, A wing and a prayer....
    [Show full text]
  • Technical Note
    TECHNICAL NOTE Formaldehyde Emissions from Plywood and Laminated Veneer Lumber TABLE OF CONTENTS Scope and Abstract ............................................................................................. 3 What is Formaldehyde ? ..................................................................................... 3 Why the Concern Over Formaldehyde ? ............................................................. 3 What is the safe level of Formaldehyde Exposure ? ........................................... 4 Why is there Particular Concern with Wood Based Panels? .............................. 4 What are the Formaldehyde Emissions From PAA Certified Products ? ............ 4 Emissions from Phenol Formaldehyde Bonded Products ................................... 5 Emissions from Amino Plastic Bonded Products ................................................ 5 What about Occupational Exposure ? ................................................................ 6 What is being done to reduce Formaldehyde Emissions Further ? .................... 6 Conclusion ........................................................................................................... 7 References and Further Reading ........................................................................ 8 Revision History ................................................................................................... 9 2 Scope and Abstract This statement has been developed in response to concerns expressed as a result of the recent review of formaldehyde toxicology carried
    [Show full text]
  • K9hxb-86Qd7-1566806032Panelogue-Substrates-Catalogue.Pdf
    1 FOREWORD Herein contains the industry's widest selection of wood-based panels compiled from rigorous research, decades of proven industry knowledge and with a keen understanding of Earth's natural resources. Our collection of substrates are engineered to meet specific demands of a wide range of applications and complies to international safety and environmental standards. Rely on our 35 years of innovation and technical expertise to select the ideal board. Within this catalogue you will find all the information you need to build possibilities into reality. Accept nothing less. CONTENTS Ecology and Environment 1 Basic Terms and Definitions 3 Substrate Selection Guide 7 1 PLYWOOD 13 4 ORIENTED STRAND BOARD PLY Premier 13 OSB Premier 33 PLY Hydra+ 13 OSB Climate 33 PLY Climate 14 OSB Ply 34 PLY Flameshield 14 OSB PB 34 PLY Curve 15 SOLID TIMBER JOINTS Multiply 15 5 STJ Plank 37 PLY Endurance 16 STJ Joint 37 WOOD-BASED FIBREBOARDS 2 STJ Blockboard 38 MDF Premier 19 MDF Hydra+ 19 6 AGGLOMERATED CORK BOARD MDF Climate 20 Cork 39 MDF Flameshield 20 COMPACT BOARD MDF Tricoya 21 7 CompacWood 41 MDF Forescolor 23 HDF Tubular 27 HDF Honeycomb 27 3 PARTICLE BOARD Transport, Handling and Storage 43 PB Premier 29 Acclimatisation 44 PB Hydra+ 29 General Woodworking Guidelines 45 PB Ultralight 30 4 Ecology and the Environment Reduction in Energy Consumption. Driven by sustainable development, Panelogue’s range of wood- The low coefficient of thermal conductivity in wood helps to ventilate ENGINEERED WOOD. ENHANCED PROPERTIES. based panels are perfectly suited for sustainable spaces where and keep our houses cool in hot climates.
    [Show full text]
  • National Unit Specification: General Information
    National Unit specification: general information Unit title: Carpentry and Joinery: Panelling and Installation (SCQF level 6) Unit code: H0RL 12 Superclass: TG Publication date: March 2012 Source: Scottish Qualifications Authority Version: 01 Summary This Unit is suitable for candidates working towards a Modern Apprenticeship in Carpentry and Joinery and will develop the candidates craft skill in traditional panelling. This Unit is designed to develop the candidate’s competence in the use of tools and equipment to manufacture and install a traditional panel and the ability to apply these skills in the workplace. It is also designed to enable candidates to develop their knowledge and understanding in carpentry and joinery terminology, techniques, practices, production of working drawings and costing. Outcomes 1 Demonstrate knowledge and understanding of terminology, components and design in relation to traditional wall panelling. 2 Produce a cutting list, a detailed setting out rod and costing for traditional wall panelling. 3 Manufacture a traditional wall panel. 4 Install traditional wall panelling. Recommended entry While entry is at the discretion of the centre, candidates undertaking the Professional Development Award in Carpentry and Joinery at SCQF level 6 must meet the requirements of the Modern Apprentices which include being employed in the relevant craft industry. Credit points and level 1 National Unit credit at SCQF level 6: (6 SCQF credit points at SCQF level 6*) *SCQF credit points are used to allocate credit to qualifications in the Scottish Credit and Qualifications Framework (SCQF). Each qualification in the Framework is allocated a number of SCQF credit points at an SCQF level. There are 12 SCQF levels, ranging from Access 1 to Doctorates.
    [Show full text]
  • 01 Timber Panelling Data Sheet
    TECHNICAL DATA SHEET ISSUED BY TIMBER QUEENSLAND TIMBER PANELLING 1 RECOMMENDED PRACTICE // MARCH 2014 This data sheet covers seasoned timber panelling for use on walls and ceilings. For continued satisfactory performance of this product, it should be fixed and finished in accordance with the recommendations included herein. SPECIES 2. Seasoned panelling (if unsealed) readily absorbs moisture. If this occurs prior to installation, subsequent shrinkage may create wide gaps between the Timber panelling is available in cypress and a range of hardwood boards, and may be sufficient for the tongue to pull out of the groove. and softwood species. With some timbers there will be a consistency in colour, texture and grain. With others, there may be a range of MOISTURE CONTENT PRIOR TO INSTALLATION features and contrasting colour between the lighter sapwood and Timber panelling is usually supplied at an average moisture content darker heartwood. between 11% and 13% and most boards can be expected to be within a few percent of the average. This suits coastal Queensland where GRADES the average moisture content of internal timbers is approximately Panelling may be graded in accordance with the respective 12%. Where conditions are drier, such as inland Queensland or an Australian Standards or to a grade specified by the manufacturer. For air-conditioned building, a lower average moisture content, within availability and suitability of panelling grades the supplier should be the range from 8% to 12% can be expected. In these situations contacted and if required samples obtained prior to purchase. where the average moisture content of the supplied panelling, differs from the in-service average, consideration should be given to ORDERING acclimatising the product prior to installation.
    [Show full text]