DOCSLIB.ORG

Gb-Itt Contract for Motorola Solutions Emergency

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Gb-Itt Contract for Motorola Solutions Emergency CITY OF SANTA FE PROCUREMENT CHECKLIST Contractor Name: Motorola / Corrective Action to Repair Emergency Response Communications Error Procurement Title: Motorola SWPA 10-00000-20-00048AH Procurement Method: State Price Agreement Cooperative Sole Source Other Exempt Request For Proposal (RFP) Invitation To Bid (ITB) Contract under 60K Contract over 60K X Department Requesting ITT/Fire Department/Police Department Staff Name David C. Tapia Procurement Requirements: A procurement file shall be maintained for all contracts, regardless of the method of procurement. The procurement file shall contain the basis on which the award is made, all submitted bids, all evaluation materials, score sheets, quotations and all other documentation related to or prepared in conjunction with evaluation, negotiation, and the award process. The procurement shall contain a written determination from the Requesting Department, signed by the purchasing officer, setting forth the reasoning for the contract award decision before submitting to the Committees. REQUIRED DOCUMENTS FOR APPROVAL BY PURCHASING* YES N/A Approved Procurement Checklist (by Purchasing) Memo addressed to City Manager (under 60K) Committees/City Council (over 60K) State Price Agreement RFP Evaluation Committee Report ITB Bib Tab Quotes (3 valid current quotes) Cooperative Agreement Sole Source Request and Determination Form Contractors Exempt Letter Purchasing Officers approval for exempt procurement BAR R FI Executed Contract, Agreement or Amendment Current Business Registration and CRS numbers on contract or agreement Summary of Contracts and Agreements form Certificate of Insurance All documentation presented to Committees Other: David C. Tapia Contracts Administrator 04/08/2021 Department Rep Printed Name (attesting that all information included) Title Date Purchasing Officer (attesting that all information is reviewed) Title Date Include all other substantive documents and records of communication that pertain to the procurement and any resulting contract. * 1 Fran Dunaway (Apr 30, 2021 09:11 MDT) Apr 30, 2021 Issued through an SWPA. exp. 7/1/21--- Andy Hopkins Andy Hopkins (Apr 29, 2021 11:06 MDT) Apr 29, 2021 note: please use appropriate PL code when requisition/PO is done Alexis Lotero Alexis Lotero (Apr 29, 2021 11:14 MDT) 3653501.572400 Exhibit A PAYMENT Except for a payment that is due on the Effective Date, Customer will make payments to Motorola within thirty (30) days after the date of each invoice. Customer will make payments when due in the form of a check, cashier's check, or wire transfer drawn on a U.S. financial institution. If Customer has purchased adaitional Professional or Subscription services, payment will be in accordance with the applicable addenda. Payment for the System purchase will be in accordance with the following milestones. System Purchase (excluding Subscribers, if applicable) 1. 100% of the Contract Price due upon contract execution (due upon effective date); If Subscribers are purchased, 100% of the Subscriber Contract Price will be invoiced upon shipment (as shipped). Motorola shall make partial shipments of equipment and will request payment upon shipment of such equipment. In addition, Motorola shall invoice for installations completed on a site-by-site basis or when professional services are completed, when applicable. The value of the equipment shipped/services performed will be determined by the value shipped/services performed as a percentage of the total milestone value. Unless otherwise specified, contract discounts are based upon all items proposed and overall system package. For invoicing purposes only, discounts will be applied proportionately to the FNE and Subscriber equipment values to total contract price. Overdue invoices will bear simple interest at the maximum allowable rate by state law. For Lifecycle Support Plan and Subscription Based Services: Motorola will invoice Customer annually in advance of each year of the plan. The chart below outlines the hourly labor rates for Motorola System Integration resources to be used. The staffing requirements shall be multiplied by the appropriate rate per resource in the table below. The hourly labor rates are fully burdened. The hourly rates per resource type and level are listed in Table 1. Resource Types Project System System Project Levels Management Engineering Technologist Administration 4 s 290.00 s 300.00 s 280.00 s 200.00 3 s 240.00 s 250.00 s 240.00 s 180.00 2 s 220 00 s 220.00 s 220.00 s 170.00 1 s 190.00 s 210.00 s 210.00 s 160.00 f' These rates apply to ordinary days and times (Monday to Friday during the hours 8am to 5pm). Additional surcharges may apply to work done outside these timeframes. The minimum charge for any resource will be 4 hours. Travel expenses are not included in these rates and may be charged separately. The qualifications of each type and level of resource are defined in the tables found at https: I lwww. motorolasolutions . com/contenUdam/m si/secure/servi ces/I abor -rates-exhib it-160408. pdf. All Motorola System Integration personnel assigned to this project will be classified according these levels. Project Administrative roles are varied and their specific duties and qualifications will be determined by the complexity and requirements of each project. Communication System and Services Agreement v.1.22.2020 16 DocuSign Envelope ID: 5F2F6242-5099-4FC9-8BAB-0585B5284915 /SPA_Signature/ SPD_SWPA_Award_004_Rev_00_0220 State of New Mexico General Services Department Statewide Price Agreement Awarded Vendor: Price Agreement Number: 10-00000-20-00048 11 Awarded Vendors- See pages 6&7 for details Payment Terms: Net 30 F.O.B.: Destination Email: Telephone No.: Delivery: See pages 6&7 Ship To: Procurement Specialist: Raelynn Lujan All State of New Mexico agencies, commissions, institutions, political subdivisions and local public Telephone No.: 505-827-0484 bodies allowed by law. Email: [email protected] Invoice: As Requested Title: Communications, Radio Equipment, Parts, Accessories and Related Services Term: November 18, 2020 thru November 17, 2022 This Statewide Price Agreement is made subject to the “terms and conditions” as indicated on subsequent pages. Accepted for the State of New Mexico 11/13/2020 /Purchasing_Agent/ Date: Mark Hayden, New Mexico State Purchasing Agent X This Agreement was signed on behalf of the State Purchasing Agent Purchasing Division: 1100 St. Francis Drive, Santa Fe, NM 87505; PO Box 6850, Santa Fe, NM 87502 (505) 827-0472 DocuSign Envelope ID: 5F2F6242-5099-4FC9-8BAB-0585B5284915 State of New Mexico General Services Department Purchasing Division Statewide Price Agreement #: 10-00000-20-00048 Page-2 Terms and Conditions (Unless otherwise specified) 1. General: When the State Purchasing Agent or his/her designee issues a purchase document in response to the Vendor's bid, a binding contract is created. 2. Variation in Quantity: No variation in the quantity of any item called for by this order will be accepted unless such variation has been caused by conditions of loading, shipping, packing or allowances in manufacturing process and then only to the extent, if any, specified in this order. 3. Assignment: a.Neither the order, nor any interest therein, nor any claim thereunder, shall be assigned or transferred by the Vendor, except as set forth in Subparagraph 3b or as expressly authorized in writing by the State Purchasing Agent or his/her designee. No such assignment or transfer shall relieve the Vendor from the obligations and liabilities under this order. b. Vendor agrees that any and all claims for overcharge resulting from antitrust violations which are borne by the State as to goods, services, and materials purchased in connection with this bid are hereby assigned to the State. 4. State Furnished Property: State furnished property shall be returned to the State upon request in the same condition as received except for ordinary wear, tear and modifications ordered hereunder. 5. Discounts: Prompt payment discounts will not be considered in computing the low bid. 6. Inspection: Final inspection and acceptance will be made at the destination. Supplies rejected at the destination for nonconformance with specifications shall be removed at the Vendor's risk and expense, promptly after notice of rejection. 7. Inspection of Plant: The State Purchasing Agent or his/her designee may inspect, at any reasonable time, the part of the Contractor's, or any subcontractor's plant or place of business, which is related to the performance of this contract. 8. Commercial Warranty: The Vendor agrees that the supplies or services furnished under this order shall be covered by the most favorable commercial warranties the Vendor gives for such to any customer for such supplies or services. The rights and remedies provided herein shall extend to the State and are in addition to and do not limit any rights afforded to the State by any other clause of this order. Vendor agrees not to disclaim warranties of fitness for a particular purpose of merchantability. 9. Taxes: The unit price shall exclude all state taxes. 10. Packing, Shipping and Invoicing: a.The State's purchasing document number and the Vendor's name, user's name and location shall be shown on each packing and delivery ticket, package, bill of lading and other correspondence in connection with the shipments. The user's count will be accepted by the Vendor as final and conclusive on all shipments not accompanied by a packing ticket. b. The Vendor's invoice shall be submitted duly certified and shall contain the following information: order number, description of supplies or services, quantities, unit price and extended totals. Separate invoices shall be rendered for each and every complete shipment. c.Invoices must be submitted to the using agency and NOT the State Purchasing Agent. 11. Default: The State reserves the right to cancel all or any part of this order without cost to the State, if the Vendor fails to meet the provisions of this order and, except as otherwise provided herein, to hold the Vendor liable for any excess cost occasioned by the State due to the Vendor's default.
Load more

Recommended publications
  • Tba0m0x Tone Remote Product
    TB7100 base station TB8100 base station TBA0M01 & TBA0M02 Tone Remote and Alarm Interface Installation and Operation Manual MBA-00030-01 Issue 1 September 2006 Contact Information Intellectual Property Rights Tait Radio Communications This product may be protected by one or more patents Corporate Head Office of Tait Electronics Limited together with their international equivalents, pending patent applications Tait Electronics Limited and registered trade marks: NZ508054, NZ508340, P.O. Box 1645 NZ508806, NZ508807, NZ509242, NZ509640, Christchurch NZ509959, NZ510496, NZ511155, NZ511421, New Zealand NZ516280/519742, NZ519118, NZ519344, For the address and telephone number of regional NZ520650/537902, NZ521450, NZ524509, offices, refer to the TaitWorld website: NZ524537, NZ524630, NZ530819, NZ534475, Website: http://www.taitworld.com NZ534692, NZ535471, NZ536945, NZ537434, NZ534369, NZ522236, NZ524378, AU2003281447, Technical Support AU2002235062, AU2004216984, CA2439018, For assistance with specific technical issues, contact EU03784706.8, EU02701829.0, EU04714053.8, Technical Support: GB23865476, GB2386010, GB2413249, E-mail: [email protected] GB0516092.4, US60/613748, US60/539617, US10/ Website: http://support.taitworld.com 520827, US10/468740, US5,745,840, US10/520827. Copyright and Trademarks To Our European Customers All information contained in this manual is the property Tait Electronics Limited is an of Tait Electronics Limited. All rights reserved. environmentally responsible company This manual may not, in whole or in part, be copied, which supports waste minimization and photocopied, reproduced, translated, stored, or reduced material recovery. The European Union’s to any electronic medium or machine-readable form, Waste Electrical and Electronic Equipment without prior written permission from Tait Electronics Directive requires that this product be disposed of Limited. separately from the general waste stream when its service life is over.
    [Show full text]
  • TBA0M01/2 Service Manual
    MBA0M01-00-812 1 TBA0M01 & TBA0M02 Tone Remote and Alarm Interface Service Manual February 2004 MBA0M01-00-812 Copyright TEL 16/02/04 2 MBA0M01-00-812 North America South East Asia Regional Head Office Regional Head Office Canada Singapore Tait Mobile Radio Inc. Tait Electronics (Far East) Pte Ltd Unit 5, 158 Anderson Avenue 491B River Valley Road Markham #09-02 Valley Point Office Tower Ontario L6E 1A9 Singapore 248373 Canada Phone: 65 471 2688 Phone: 1 905 472 1100 Fax: 65 479 7778 Toll Free: 1 800 890 TAIT (8248) E-mail: [email protected] T800T800 Fax: 1 905 472 5300 E-mail: [email protected] Thailand TEL Contact Information Tait Mobile Radio Ltd USA 14/1 Suwan Tower Corporate Head Office Toll Free: 1 800 890 TAIT (8248) Third Floor E-mail: [email protected] North Sathorn Road Tait Electronics Ltd Soi Saladaeng 1 175 Roydvale Avenue Bangrak P.O. Box 1645 Latin America Bangkok 10500 Christchurch Thailand New Zealand E-mail: [email protected] Phone: 662 267 6290 Customer Support Enquiries Fax: 662 267 6293 North Asia E-mail: [email protected] Phone: 64 3 357 9991 Fax: 64 3 358 0320 Regional Head Office E-mail: [email protected] Hong Kong Europe Tait Mobile Radio (HK) Ltd Regional Head Office Internet Unit 2216, North Tower United Kingdom Concordia Plaza http://www.taitworld.com No. 1 Science Museum Road Tait Europe Ltd Ermine Business Park Tsim Sha Tsui East Ermine Road New Zealand Kowloon Phone: 852 2369 3040 Huntingdon Cambridgeshire PE29 6WT Tait Communications Ltd Fax: 852 2369 3009 United Kingdom 540 Wairakei Road E-mail: [email protected] P.O.
    [Show full text]
  • Model 284 Multi-Line Tone Remote Spec Sheet
    Model 284 Multi-Line Tone Remote Spec Sheet INTRODUCTION The Zetron Model 284 Multi-line Tone Remote is a The unit is fully configurable via PC by the dealer. It four-line, multifunction, EIA compatible, tone remote includes nine programmable keys that may be assigned radio controller for multiple base station control. It selected functions. The available selections include; Single features an available built-in paging encoder for selective frequency select (F1-F8), Double frequency select (F1/ calling of tone-only pagers, tone+voice pagers and F2), Coded/Clear, Intercom, Privacy, Repeat on/off, Rx2 mobiles. Selective calling supports 2-tone, 5-tone, DTMF, Mute on/off, PL1, PL2, PL3, PL4, Wild I, Wild II, Supervisor 2805/1500 pulse, stack page, and a 50 user page-by- takeover, Mute, Unselect mute, 5-beep alert, High/lo name database. A PTT handset, built-in microphone alert, Siren alert, Fast siren alert, Steady alert, Off-Hook and speaker are included. Line select keys include Speaker Mute, Hook Disable, Call Decoder Mute, Monitor, VOX, Transmit, and Select indicators. Audio from the and Transmit. unselected lines is summed at a user adjustable level. For applications with less than 4 lines, unselect audio may be routed to an external amplified speaker. BASE STATION CONTROL • Tone remote control of up to four base stations • Separate unselect audio may be routed to an external • Up to 8 frequency control (F1-F8) plus monitor and powered speaker when using 3 or less base stations other functions • 2-wire line interface for up to four base
    [Show full text]
  • Model 20-27 Tone Remote Termination Panel
    The Way for 2-Way Model 20-27 Tone Remote Termination Panel The 20-27 is a low cost programmable tone termination panel for use with tone remote controllers to remotely control repeaters and base station radios. By decoding the proper function tones from tone remote controllers, the 20- 27 can control remotely located base stations or repeaters. At the same time the panel provides a two-way audio path in either the 2 or 4 wire mode. The 20-27 comes housed in a compact metal cabinet that provides not only code to make the channel selection. The 20-27 has binary sturdiness and ruggedness but also excellent EMI shielding output capability as a standard programmable feature. characteristics. LTR and ESAS Trunking PC Programmability An additional programmable feature of the 20-27 is By using an IBM compatible personal computer some compatibility with certain trunking radios. Please refer to of the operational characteristics of the 20-27 can be the mobile radio models listed on the back of this brochure. changed. When programming the 20-27 the installer has Wherever possible, control of these radios is through the the choice of which one of the eleven function tones are microphone jack or auxiliary connector via the serial port to be used for a particular function. Also the panel can of the 20-27. The installer has the choice of which function be set up to respond to the two function tone scheme tone or tones are to be associated with which system and/ normally associated with older Motorola tone remotes.
    [Show full text]
  • APX Consolette System Planner
    APX™ TWO-WAY RADIOS APX 7500 MULTI-BAND CONSOLETTE SYSTEM PLANNER Manual Revisions Changes which occur after this manual is printed are described in PMRs (Publication Manual Revisions). These PMRs provide complete replacement pages for all added, changed, and deleted items, including pertinent parts list data, schematics, and component layout diagrams. Computer Software Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse- engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. Documentation Copyrights No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola. Disclaimer The information in this document is carefully examined, and is believed to be entirely reliable.
    [Show full text]
  • Radio Dispatch Solutions
    GAI-TRONICS® A Hubbell Company Termination Panels and Telephone Interconnect Basic Remote Desksets (Tone, DC and Local) Advanced Remote Desksets with Paging and MDC1200 Navigator PC-Based Dispatch Consoles CommandPLUS Desktop Dispatch Consoles Audio Accessory Box Toll Free: 1 (800) 492-1212 Tel: (610) 777-1374 Fax: (610) 796-5954 www.gai-tronics.com Overview GAI-Tronics has been manufacturing Radio Dispatch Products for over 30 years. We take pride in the fact that our dispatch products are designed, manufactured, and supported at our factory in Mohnton, Pennsylvania. Our ISO9001:2000 Registered manufacturing facility utilizes industry-leading technology to ensure high quality and reliable performance. Industry-rated at the top of the quality scale, GAI-Tronics’ dispatch products remain competitive at both full-feature and economical ends of the pricing spectrum. GAI-Tronics’ dispatch product technical support staff provides both telephone support and in-house depot repair services. From answering product programming questions to rebuilding a console after a lightning strike, our dedicated technicians are committed to providing the highest level of support. Applications GAI-Tronics’ Radio Dispatch Products are ideally suited for a number of applications. Some of the more common are: n Individual Public Safety Offices (In-system communications for Fire, Police, EMS, etc.) n Utilities n Central Dispatch (multi-system communications) n Forestry Service n Transportation n Security n Any application requiring remote radio control, used for dispatching personnel/vehicles or general communications, from a central location or distributed locations. Products Desksets Single Radio / Base / Repeater Control Local Remote Deskset - Model ILD1000A The ILD1000A Local Deskset connects directly to the controlled base station or repeater, via a leased or private line, for economical remote control.
    [Show full text]
  • Mtr3000 Base Station / Repeater & Satellite Receiver
    SPEC SHEET MTR3000 BASE STATION/REPEATER , SATELLITE RECEIVER THE FUTURE OF BUSINESS COMMUNICATION, DELIVERED TODAY MTR3000 BASE STATION / REPEATER & SATELLITE RECEIVER The MTR3000 is a robust, high powered base station / repeater that offers reliability, future expandability, and the ease of migration from analog to digital technology. It integrates voice and data seamlessly, offers enhanced features that are easy to use and delivers increased capacity while the MTR3000 satellite receiver model helps enhance analog coverage. So no matter your needs, the MTR3000 provides a flexible communication solution from the field to the factory floor. SPEC SHEET MTR3000 BASE STATION/REPEATER , SATELLITE RECEIVER HIGH POWERED PERFORMANCE EXPANDED CAPACITY AND COVERAGE The MTR3000 is the ideal high power base station/ Your workforce is hard at work every day – picking up repeater solution for MOTOTRBO™ digital two-way loads, making road repairs, providing security, responding radio systems. Because MOTOTRBO uses TDMA digital to guest requests or restoring power after a storm. That’s technology, it delivers integrated voice and data, twice the why you need the proven performance of MOTOTRBO calling capacity, plus clearer voice communications. With radio systems for non-stop communication no matter the its integrated 100W power amplifier and AC/DC power size of your work force, no matter where they go. supply, the MTR3000 has minimal cabling, rack space, expense and overall complexity. The MTR3000 operates The MTR3000 supports MOTOTRBO’s IP Site Connect in digital mode in MOTOTRBO Conventional, IP Site dramatically improves customer service and productivity Connect, Capacity Plus, Linked Capacity Plus and Connect by using the Internet to extend coverage to users Plus systems delivering increased capacity, spectral anywhere in the world.
    [Show full text]
  • Request for Proposals
    TOWN OF CHESHIRE, CONNECTICUT REQUEST FOR PROPOSALS LEGAL NOTICE TOWN OF CHESHIRE, CONNECTICUT REQUEST FOR PROPOSALS EMERGENCY COMMUNICATIONS UPGRADE PROJECT LAND MOBILE RADIO SYSTEMS Wednesday, March 28, 2018 The Town of Cheshire will receive sealed proposals for: LAND MOBILE RADIO SYSTEMS Proposal #1718-32 until 11 AM on Wednesday, May 23, 2018. At that time proposals will be opened in public and read aloud. The documents comprising the Request for Proposals may be obtained on the Town’s website, www.cheshirect.org, under ‘Bids and Requests for Proposals’. The Town of Cheshire reserves the rights to amend or terminate this Request for Proposal, accept all or any part of a proposal, reject all proposals, waive any informalities or non-material deficiencies in a proposal, and award the proposal to the proposer that, in the Town’s judgment, will be in the Town’s best interests. TOWN OF CHESHIRE, CONNECTICUT REQUEST FOR PROPOSALS EMERGENCY COMMUNICATIONS UPGRADE PROJECT LAND MOBILE RADIO SYSTEMS TABLE OF CONTENTS 1.0 INTRODUCTION ................................................................................................................... Page 1 1.1 Project Background 1.2 Existing System Overview 2.0 GENERAL RFP AND PROCUREMENT REQUIREMENTS-----------------------------------Page 11 2.1 Request for Proposals 2.2 Right to Amend or Terminate the RFP Or Contract 2.3 Key Dates 2.4 Obtaining The RFP 2.5 Proposal Submission Instructions 2.6 Questions and Amendments 2.7 Additional Information 2.8 Costs for Preparing Proposal 2.9 Ownership
    [Show full text]
  • Communications Solutions Radio Categories
    Communications Solutions Radio Categories Multi-Digital Protocol NX-5200/5300/5400 • 6 W (136-174 MHz) Models • Active Noise Reduction (ANR) • 5 W (380-470, 450-520 MHz) Models • 1 W Loud Speaker Audio • 3 W (700/800 MHz) Models • Built-in GPS Receiver w/Internal Antenna • Multi-Digital + FM Analog Operation • microSD / microSDHC Memory Card Slot ® • NXDN Conventional • Easy to Follow Selectable GUI ® • NXDN Type C Trunked • Front Panel Programming • P25 Phase 1 Conventional/Trunked • Intelligent Battery Information Display • P25 Phase 2 Trunked • AES/DES Voice & Data Encrytion • FM Analog Conventional/Trunked • DES/AES Software Keyloader • 6 Front & 2 Side PF keys • OTAP & OTAP Manager • 12-Key Keypad Models Available • USB Programming Cable • Maximum Channels per radio = 1,024 • Trunking Authentication (AES128) (up to 4,000 channels with option) • Over-The-Air-Alias • Number of Zones = 128 • P25 Paging • Maximum Number of P25 Trunked • P25 Text Data Group ID’s = 512 • P25 Vote Scan • Maximum Number of P25 Conventional Talkgroup ID’s = 1,500 • Built-in Motion Sensor - Man Down • Color 1.74" (240 x 180 pixel) • Emergency / AUX Key Transflective TFT Display • MDC-1200 ® • Built-in Bluetooth ® Ver. 3.0 Class 2 • FleetSync /II (2.5mW / up to 10m) • IP67/68 & MIL-STD-810 C/D/E/F/G NX-5700/5800 • 5 W - 50 W (136-174 MHz) Models • Built-in Bluetooth ® Ver. 3.0 Class 2 • 5 W - 45 W (380-470, 450-520 MHz) Models (2.5mW / up to 10m) • Multi-Digital + FM Analog Operation • Active Noise Reduction (ANR) ® • NXDN Conventional • DB-25 Accessory Connector
    [Show full text]
  • Houston Fire Department
    CITY OF HOUSTON, TX TRUNKED RADIO SYSTEM REQUEST FOR PROPOSALS, 8/31/07 Section 1—Current Radio Communications Environment... 1 1.1 Houston Airport System.........................................................................................1 1.1.1 Current Operations...................................................................................1 1.1.2 Radio System Coverage............................................................................1 1.1.3 Dispatch Operations .................................................................................2 1.1.4 Needs & Requirements.............................................................................5 1.1.5 Interoperability Needs ..............................................................................6 1.2 Houston Fire Department ......................................................................................6 1.2.1 Current Operations...................................................................................6 1.2.2 User Equipment .......................................................................................7 1.2.3 Dispatch Operations .................................................................................8 1.2.4 Radio System Problems ..........................................................................16 1.2.5 Needs & Requirements...........................................................................17 1.2.6 Functional Requirements ........................................................................19 1.3 Houston Police Department
    [Show full text]
  • MC SERIES Deskset Controllers
    DATA SHEET MC SERIES Deskset Controllers Pictured from left to right are the MC2000™ Advanced Model, the MC2500™ Multi-channel Model, and the MC1000™ Basic Model. STANDARD FEATURES • Multiple models for various applications • Internal microphone, intercom, and speaker for convenient operation – Extended Local Control for controlling an on-site radio up to 1000 feet away • Push-to-talk (PTT) handset for private communications – Tone or DC Remote Control for controlling a station with 600 ohm telephone lines • Monitor switch for monitoring channel activity before transmitting • Multiple control points allow up to 10 units to operate in parallel PRODUCT OVERVIEW The MC Series Desktop Controllers allow remote access to the functions of a compatible station (base station, repeater, or control station). These desktop controllers support tone, DC, and E&M signalling for keying and control of stations. DATA SHEET MC SERIES Deskset Controllers MC1000 BASIC MODEL (non-signaling) FEATURES For Local Control Models • Single Frequency and Single Station Control • Monitor Button with LED • Push-to-Talk Handset • Front panel programming (easy setup – no RSS required) • Speaker • Intercom between MC1000 units and stations • Speaker on/off (receive audio is heard through handset and speaker simultaneously) • Operator cross mute • Volume Control • 10 units can operate in parallel • Full Duplex Capability • Parallel Operator Busy Indication • Internal Mic (for use without handset) • 120 Vac - 60 Hz Power Supply • Transmit Button with LED • Can be wall mounted For Tone and DC Control Models Only in addition to Local Features • 4 Frequency Single Station Control • 2- or 4-Wire Audio • Takeover/Line Select allows a supervisory unit to override other parallel units or allows connection of two base stations for back-up control (Main/Alt operation) MC2000 ADVANCED MODEL (signaling) FEATURES • All MC1000 Basic Model features plus: • 110/220 Vac 50/60 Hz Power Supply • Parallel Status (Tone model only) ......
    [Show full text]
  • The LZA2027 Tone Termination Panel Instruction and Programming Manual
    The LZA2027 Tone Termination Panel Instruction and Programming Manual BK Radio 7100 Technology Drive West Melbourne, FL 32904 Phone: (800) 648-0947 Fax: (321) 984-0434 www.RELM.com 0300-30944-900 Rev. 12-02 TABLE OF CONTENTS SPECIFICATIONS ...................................................................................................................1 1 GENERAL DESCRIPTION..........................................................................................2 1.1 Description ...........................................................................................................2 1.2 Capabilities and Features .....................................................................................2 1.3 Service Information...............................................................................................3 2 INSTALLATION AND SETUP.....................................................................................3 2.1 Inspection.............................................................................................................3 2.2 Line Connection....................................................................................................3 2.3 Test Procedure.....................................................................................................3 2.4 Disassembly and Reassemble..............................................................................5 3 CUSTOM PROGRAMMING........................................................................................5 3.1 General Information..............................................................................................5
    [Show full text]