DOCSLIB.ORG

Harmony® Series Integrated Wiegand Solutions Access Control Products Available Through Authorized Channel Partners Only

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Harmony® Series Integrated Wiegand Solutions Access Control Products Available Through Authorized Channel Partners Only Product Catalog Harmony® Series Integrated Wiegand Solutions Access Control Products Available through Authorized Channel Partners only. Contact your local ASSA ABLOY Door Security Solutions sales consultant for details. Table of Contents Harmony Series Overview, Features and Electrical Specifications . 3 As part of their promise to provide innovative, fast and effective high security solutions to their customers, certain ASSA ABLOY 8200/R8200 Series Mortise Lock . 4-5 Group brands offer ElectroLynx®, a universal quick-connect system that simplifies the electrification of the door opening. 10 Line Cylindrical Lock . 6 ElectroLynx® is a registered trademark of ASSA ABLOY Inc. 80 Series Exit Devices . 7-8 Electric Latch Retraction Option (56-) . .9-10 MicroShield® 7000 Series Multi-Point Vertical Rod. 11-13 ASSA ABLOY Group companies offer MicroShield®, an anti- FM7300 Series Multi-Point Locks . 14-15 microbial coating for door hardware. MicroShield uses proven silver Roseless Trim, Standard & Coastal Series Levers & Finishes . .16 ion-based technology from Agion®, a leading provider of Studio Collection Levers. 17-18 antimicrobial solutions, to stem the spread of bacteria and other microbes. Ordering Gramercy Series Levers . .19 MicroShield® is a registered trademark of ASSA ABLOY Rose Designs and ET Trims. .20 Access and Egress Hardware Group, Inc. Access Credentials . .21 multiCLASS Readers. .22 Gaskets & Wiegand Test Unit . .23 Power Supplies and 10 Line Strike Options. .24 Mechanical Options . .25 Cylinder Options . .26 The Agion antimicrobial is not intended as a substitute for good hygiene. Coated products must still be cleaned to Cylinder Options & Shipping Information. .27 ensure the surfaces will be free of destructive microbes. ASSA ABLOY makes no representations or warran- Windstorm Certifications: UL Listed & Florida Building Codes . .28 ties, express or implied, as to the effi cacy of the Agion ss written antimicrobial. A copy of the Agion warranty is available upon request. Agion is a registered trademark of Agion Harmony Series Technologies, Inc., Wakefi eld, MA, USA Typical Application NT • CIE FLE FI X F IB E L E ® • D EcoFlex E P E N D A B L E EcoFlex™ Technology • Reduces energy consumption up to 96%*, as certified by GreenCircle - Lower operating costs - Assists with load reduction in optimizing energy performance credit in LEED - Reduces number of power supplies required • Field configurable to fail-safe or fail-secure • Operates from 12-24VDC, offering greater flexibility in McKinney Harmony Series system design QC12 Hinge (Not supplied) • Innovative actuator design provides superior reliability - Higher performance and reduced maintenance - Ability to have longer cable runs without negatively impacting lock function - Reduces risk of voltage drops and L U T I O N SO LE eliminates inductive kickback B A N I A - Lower total cost of ownership T S S G U S N *Up to 95% for exit trim I A V A S Y G R ® NE E All rights reserved. Reproduction in whole or part without the expre Copyright © 2007-2021, SARGENT Manufacturing Company. CERTIFIED 1-800-727-5477 • www.sargentlock.com 90645 01/21 permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. Overview, Features and Electrical Specifications Harmony Series Overview The patented Harmony Series combines a card reader, Door Position Switch (DPS), and Request-to-Exit (REX) signaling in a sleek, pleasing design backed by SARGENT Grade 1 hardware. Harmony is available with 8200 and R8200 Mortise Lock, 10 Line Cylindrical Lock , 7000 Series Multi-Point Vertical Rod, FM7300 Multi-Point Lock configurations and a variety of 80 Series Exit Devices (Rim, Mortise and Vertical Rod). The Harmony exit devices are available UL Listed for use on fire-rated doors. The Harmony Series offers levers with similar designs and finishes for the three types of locks to create a continuity of design. The Harmony Series products are easily integrated into a Wiegand-compatible access control system. The Harmony Series H1 uses 125 kHz HID® proximity reader technology. The Harmony Series H2 uses 13.56 MHz HID iCLASS SE® reader technology. All Harmony products offer Fail Safe or Fail Secure operation. About ASSA ABLOY’s Authorized Channel Partner and Certified Integrator Programs Sophisticated Access Control Solution The SARGENT Harmony Series is part of a stream of new ASSA ABLOY • Consolidates all components into the lock products moving from traditional mechanical locks to being extensions – Incorporates card reader, Door Position Switch (DPS) and Request of access control systems in facilities. These exciting new technology-rich to Exit (REX) signaling products require an increase in knowledge to ensure the correct – Eliminates reader interface modules selection and implementation in various environments. • Significantly faster installation time, lower installed cost and To aid our customers in this area, ASSA ABLOY has created two programs reduced disruption that provide the necessary training to sell, order, install and service our – Requires only one cable run from the lock to the access ® technology products, including Aperio , Integrated Wiegand, IP-enabled control panel and self-configurable intelligent components: – Maintains architectural integrity around the door • The Authorized Channel Partner (ACP) program is • Open architecture platform is compatible with all standard access open to resellers, who sell ASSA ABLOY’s technology control systems products to certified integrators, and help with • Supports industry leading credentials: product selection based on the application. – HID 125kHz proximity (H1) – HID 13.56 MHz iCLASS SE • The Certified Integrator (CI) program provides hands-on – PIV/PIV-I (64-bit BCD, 128-bit BCD or 200-bit output) ss written training for security systems integrators and network • Aesthetically complemented by SARGENT Studio Collection and administrators. Not only does this training familiarize Coastal Series levers - elegant design with ANSI Grade 1 hardware certified integrator candidates with product features offering a complete hardware portfolio, including mortise locks, and applications, it also gives them valuable experience cylindrical locks and rim, surface and concealed vertical rod exit trim installing, commissioning, and troubleshooting the products in a real-world environment. For more information on the qualifications for becoming an ACP Common Features of Harmony Series Products or CI, contact your local ASSA ABLOY Door Security Solutions sales • A hard-wired platform for use with existing Wiegand compatible consultant for details. access control systems • Centralized control of all locks using customer’s existing access H1 Systems control system • For use on exterior doors with appropriate weatherseal gasket ® Cylindrical locks or exit devices: EcoFlex mortise locks: • A multi-colored LED indicates card read activity and can be manually • Reader draw = 150 mA • Reader draw = 150 mA controlled by access control panel • 12VDC solenoid draw = 500 mA • Actuator draw = 15 mA continuous • Audible beep sounds with card read • 24VDC solenoid draw = 250 mA • Maximum (2) locks per 1 Amp power • UL Listed for fire doors available (12- for exit devices) ** supply (500 mA peak current draw) • 24VDC exit device (with electric • UL Listed for Fire Doors Certified for Canada ** latch retraction) = 600 mA during Note: The H1 reader requires 12VDC for retraction, 250 mA maintained power. As the lock accepts either 12 or • Fail Safe or Fail Secure operation ® Note: H1 reader always requires 12VDC 24V, we recommend a 12V power supply • ElectroLynx connector system to support both the lock and reader with • Monitoring is based on lock type selected a single power supply. • Harmony mortise locks available with internal end-of-line resistors H2 Systems Electrical Specifications Cylindrical locks or exit devices: EcoFlex® mortise locks: Supplied power must be filtered and regulated • Reader draw = 150 mA • Reader draw = 150 mA • H1 and H2: Lock Solenoid 12VDC or 24VDC • 12VDC solenoid draw = 500 mA • Actuator draw = 15 mA continuous • 56-H1 and 56-H2: Exit Device 24VDC • 24VDC solenoid draw = 250 mA • Maximum (2) locks per 1 Amp power • 24VDC exit device (with electric supply (500 mA peak current draw) • H1: Reader always 12VDC latch retraction) = 600 mA during Note: H2 reader uses 12 or 24VDC • H2: Reader 12VDC or 24VDC retraction, 250 mA maintained Note: HID and iCLASS are registered trademarks of HID Global Corporation. All rights reserved. Reproduction in whole or part without the expre Copyright © 2007-2021, SARGENT Manufacturing Company. * * Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings. 1-800-727-5477 • www.sargentlock.com 90645 01/21 3 permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. 8200 Series Mortise Locks Harmony Series The Harmony Series Mortise Lock product integrates SARGENT’s 8200 and R8200 Series Grade 1 mortise lock into an existing Wiegand
Load more

Recommended publications
  • Mul-T-Lock 2016 Product Catalog Mul-T-Lock High Security & Access Control Solutions
    Mul-T-Lock 2016 Product Catalog Mul-T-Lock High Security & Access Control Solutions Effective January 1, 2016 TABLE OF CONTENTS Introduction 1 Grade 1 Hercular® Deadbolts 65 How to Order 4 Hercular® Anti-Ligature & Latch Locks 66 Multiple Platforms – A Security Level for Every Need 6 Grade 2 Cronus® Deadbolts 67 MT5®+ Platform Introduction 7 Locksets & Hardware 68 Interactive®+ Platform Introduction 8 Rim Locks 69 Integrator® Platform Introduction 9 Mortise Locks 70 Access Control, Keyless Entry & Smart Solutions 10 Lever & Knob Locks 71 WatchLock™ 11 Utility, Furniture & Retail Locks 73 Traka® Key & Asset Management Solutions 14 Padlocks 76 ENTR™ Smart Lock Solution 16 ArmaD Locks 79 Yale® Key Safes & Boxes 18 Mul-T-Lock Junior 82 CLIQ® E-Cylinders & Smart Key Solutions 20 Mul-T-Lock Parts 84 SMARTair® Access Control Solutions 26 Cylinder Parts - Pins 86 SMARTair® E-Motion Electronic Cabinet & Locker Locks 32 Cylinder Parts 100 Yale® Shine™ Glass Digital Door Locks 36 Hercular® Deadbolt Parts 138 Code-It™ Electronic Pushbutton Levers 38 Anti-Ligature Deadbolt & Gate Latch Lock Parts 142 GotU®+ Digital Door Viewers 40 Top Guard® Parts 143 Mul-T-Lock Keys, Keying Options & Services 42 Utility & Furniture Lock Parts 144 Keys & Cards 43 Padlock Parts 160 Services 47 Key Cutting Machine Parts 170 Machinery, Pinkits & Tools 48 Standard Ordering Form 174 Locksmith Tools 49 Master Keying Information 175 Cylinders 51 Key & Cylinder Maintenance 178 Mortise Cylinders 52 Warranty 180 Mogul Cylinders 52 Conditions of Sale 182 Rim Cylinders 53 Available Finishes 187 Large Format Interchangeable Cores 53 Knob, Lever and Deadbolt Replacement Cylinders 54 Foreign Cylinders 62 Deadbolts & Deadlatches 64 Established in 1973, Mul-T-Lock is a worldwide leader in the developing, manufacturing, and marketing of high security products for Institutional, Commercial, Industrial, and Residential customers.
    [Show full text]
  • MR SERIES Mortise Locks Grade 1
    MR SERIES Mortise Locks Grade 1 pdqlocks.com TABLE 0F CONTENTS WHAT MAKES A GREAT LOCK ............................................................................................................................ 2-3 PRODUCT SPECIFICATIONS ..................................................................................................................................4 FUNCTIONS .................................................................................................................................................... 5-9 INDICATORS .................................................................................................................................................... 10 CROSS REFERENCE TABLES ............................................................................................................................... 11 F SERIES TRIM ............................................................................................................................................12-13 J SERIES TRIM .............................................................................................................................................14-19 ELECTRIFIED LOCKING/UNLOCKING (FAIL SECURE/FAIL SAFE) .................................................................................... 20 REQUEST TO EXIT, LATCH BOLT MONITORING, ELECTRIC STRIKES , POWER SUPPLIES ...............................................21-22 POWER TRANSFER HINGES ...............................................................................................................................
    [Show full text]
  • Regulatory Guide 5.12, Revision 1
    U.S. NUCLEAR REGULATORY COMMISSION October 2016 OFFICE OF NUCLEAR REGULATORY RESEARCH Revision 1 Technical Lead A. Tardiff REGULATORY GUIDE REGULATORY GUIDE 5.12 (Draft was issued as DG-5027, dated January 2015) GENERAL USE OF LOCKS IN THE PROTECTION AND CONTROL OF: FACILITIES, RADIOACTIVE MATERIALS, CLASSIFIED INFORMATION, CLASSIFIED MATTER, AND SAFEGUARDS INFORMATION A. INTRODUCTION Purpose This regulatory guide (RG) describes methods and procedures that the staff of the U.S. Nuclear Regulatory Commission (NRC) considers acceptable for the selection, use, and control of locking devices. Locks can be used in the protection of: areas, facilities, certain radioactive materials, and specific types of information (e.g., classified matter, National Security Information (NSI), Restricted Data (RD), Formerly Restricted Data (FRD), Safeguards Information (SGI)). Applicable Regulations • U.S. Code of Federal Regulations, “Domestic Licensing of Production and Utilization Facilities,” Part 50, Chapter I, Title 10, “Energy” (10 CFR Part 50), (Ref. 1). Specifically Section 10 CFR 50.34 "Contents of applications" requires under (c)(1) that "[e]ach applicant for an operating license for a production or utilization facility that will be subject to §§ 73.50 and 73.60 of this chapter must include a physical security plan" and under (c)(2) "[e]ach applicant for an operating license for a utilization facility that will be subject to the requirements of § 73.55 of this chapter must include a physical security plan…" • 10 CFR Part 50, Appendix R, “Fire Protection Program for Nuclear Power Facilities Operating Prior to January 1, 1979,” requires under III.N.4, that the fire brigade leader shall have ready access to keys for any locked fire doors.
    [Show full text]
  • Locksmith Glossary of Terms Active Leaf
    Locksmith Glossary of Terms Apprenticeship and Industry Training Active Leaf: In a pair of doors, the door or doors in which the latching device is installed; also referred to as an Active Door. AHJ: (abbr.) Authority having Jurisdiction All-section Key Blank: The key section that enters all the keyways of a multiplex key system. ALOA: Associated Locksmiths of America, Inc. Alternating Parity: Most often describes the type of mathematical progression employed to develop master key systems. Parity refers to the bitting depths, “odd” or “even” numbers. In an alternating parity system, the bitting depths in any given bitting position can be odd or even numbered depths; sometimes called a “one-step” system. Alberta Barrier-free Design Guide: The Barrier-free Design Guide (Alberta Safety Codes Council) is regulated under the Safety Codes Act. This Guide is prepared by the Government of Alberta and provides information on requirements to provide reasonable access for seniors and those with disabilities. It includes entrances, safe paths of travel through and between facilities and access to various rooms including washrooms and recreational areas. Americans with Disabilities Act: This is a US federal law dealing with minimum standards of building accessibility, as well as other issues affecting individuals with disabilities. Annunciator: A device that produces an audible and/or visible indication of light and/or noise, or a verbal message. ANSI: (abbr.) American National Standards Institute, Inc. ANSI Cut-out: A standardized cut-out for hardware furnished on many rated and non-rated doors and frames. Anti-friction Latch: A device incorporated into the latch bolt of a lock for reducing friction between bolt and strike.
    [Show full text]
  • Securemote™ Enabled Architectural Mortise Lock Installation Instructions
    SecuRemote™ Enabled Architectural Mortise Lock Installation Instructions These instructions are designed to be a guide for assembly. The actual “ORDER” of assembly may be altered by the craftsman. We have included explanations of the design at several intervals to assist the installer. The Keeler concept was designed in conjunction with several experienced craftsmen in the US, and several features are designed to allow proper alignment on the door for smooth operation. All of our mechanical components are proudly machined in the United States. Installation Sections: Preparing the Door, Mortise Case Installation, Exterior Escutcheon Installation, Interior Component installation, Interior Escutcheon Installation, Armor Plate Installation, Preparing the Jamb and Strike Installation ESP 0025 10 9 5 25 OPTION B 23 2 1 30 29 31 32 5 5 OPTION A 4 2 8 7 24 34 3 18 13 35 33 3 36 6 26 27 11 12 28 22 21 20 19 14 17 16 15 MATERIAL MAXIMUM MASS DRAWN BY ITEM DESCRIPTION QTY. ITEM DESCRIPTIONPER DRAWING MAC QTY. 1 20" WIRE HARNESS 1 TOLERANCE20 (UNLESS SPEC'D)INT.DESCRIPTION KNOB NUT, MORTISE SCALE 1 ENGLISH [METRIC] ELECTRONIC HARDWARE PACKOUT 1:4 THIS DRAWING AND ITS CONTENTS ARE CONFIDENTIAL AND ARE NOT TO BE 2 PL DEC ±.010 [±.25] 2 1.5mmCOPIED AMP IN WHOLE Mini OR IN PART CT OR USED Connectors OR DISCLOSED TO OTHERS EXCEPT AS 2 213 PL DEC ±.005 [±.13]KNOB/LEVERNUMBER WASHERA SHEET REVISION 1 AUTHORIZED BY BELWITH PRODUCTS LLC. 3 MORT. E-CHASSIS KIT RIGHT 1 SIMILAR PARTS 22ANGULAR ±2° [±2°]KNOB/LEVERESP INT, 0025 ASSYSIZE 2 OF 5 G 1 4 MORTISE CASE 1 23 BATTERY BOX ASSY 1 5 SCREW, #12 WOOD MOD THD 6 24 BATTERY 7.2V PACK 2 6 EXTERIOR ESC ASSY ELECTRIC 1 25 ARMOR PLATE TOP 1 7 MORTISE CYLINDER 1-1/8" 1 26 ARMOR PLATE BOTTOM 1 (WITH CUT KEYS) 2 27 SCREW 6-32 X 3/8" FLAT UC PHIL 3 8 BLANK KEY 1 28 FINISHED SCREW COVER 1 9 STEEL HEX NUT 1 29 SCREW #10 X 3" WOOD PHIL FLAT 4 10 CENTERING STUD 1 30 ARMOR REINFORCEMENT PLATE 1 11 CYLINDER PLUG ASSY 1 31 DUST BOX 1 12 SPINDLE ASSY.
    [Show full text]
  • Series Mortise Locks
    7800 / 8200 Series Mortise Locks Copyright © 2010-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. Overview, Features and Electrical Specifications 8200/R8200/7800 Mortise Locks Table of Contents Specifications & Certifications........................................................3 Windstorm Certifications ............................................................4 Features..............................................................................5 Simplí™ Roseless Trim & R8200 Mortise Lock.s . .....................................6 Studio Collection Levers & Trim ....................................................7-9 MicroShield® Coastal Series™ & Standard Levers & Trim ....................................... 10-11 As part of their promise to provide innovative solutions to their customers, certain ASSA ABLOY Group brands offer the Escutcheon Designs .................................................................12 MicroShield® technology, a silver-based antimicrobial coating Freewheeling (FE) Trim Design, ADA & Handicap Warning............................13 designed to inhibit the growth of bacteria. MicroShield® is a registered trademark of Yale Security Inc., Thumbturn Designs .................................................................14 an ASSA ABLOY Group company. Emergency Releases, Indicators & Accessories
    [Show full text]
  • 7800/8200 MORTISE LOCKS 1-800-727-5477 7800/8200 Mortise Locks
    7800/8200 MORTISE LOCKS 1-800-727-5477 7800/8200 Mortise Locks www.sargentlock.com Table of Contents Page Specification and Certification Compliance 1 Features 2 Coastal Series™ Decorative Levers, Roses, Escutcheons and Turns 3 8200 Levers with Rose Designs 4 8200 Levers with Escutcheon Designs 5 8200 Freewheeling Design, ADA and Handicap Warning 6 7800 Push/Pull Trim and 7800/8200 AV Trim 7 7800 Knobs with Rose and Escutcheon Designs 8 Functions 9-12 Strikes and Fronts 13 Electromechanical and Monitoring, 49- Prefix Lock Status Indicators and 50- Prefix Secured Indicator Rose 14 Turns, Emergency Releases and Rabbeted Door Kits 15 Cylinders and Rosettes 16-17 Cylinder Rosette and Blocking Ring Requirements 18 Options 19 How to Order and Security Screw Chart 20 Suggested Architectural Specifications 21 SARGuard Coating • New finish coating available on all SARGENT product lines, utilizes a silver-based antimicrobial compound from AgION Technologies • As an integral part of the finish coating, SARGuard lasts for the life of the hardware • SARGuard coating permanently suppresses the growth of bacteria, algae, fungus, mold and mildew. It is effective against a broad spectrum of bacteria. • Non-toxic and completely safe. The Agion antimicrobial compound is EPA and NSF approved and FDA listed for use in medical and food preparation equipment. The AgION antimicrobial is not intended as a substitute for good hygiene. Coated products must still be cleaned to insure the surfaces will be free of destructive • Applications: Anywhere there is need for a clean environment (hospitals, laboratories, schools, microbes. SARGENT makes no representations or warranties, express or implied, as to the efficacy of the medical centers, daycare, food processing etc.) AgION antimicrobial.
    [Show full text]
  • Product Guide
    ® !UTOMOTIVEs#OMMERCIALs&ACILITYs2ESIDENTIALs2ETAIL3OLUTIONS PRODUCT GUIDE Our Family of Brands: By PRO-LOK ® ® KEY CHAINS MAY 2017 Catalog # 18720317 Our Family of Brands: ® ® is built on decades of experience in the manufacturing, security, and retail industries. ® merges innovative thinking, superior engineering, and distinct industry knowledge to develop high quality products that create valuable solutions that solve problems, save time, and make our customers money. ® is known for its continued committment to excellence in cutomer service and product quality. As a family owned and family operated manufacturing company based in Orange, CA, ® has been manufacting USA MADE products since 1983. Based on the knowledge we have collected, and 17 patents awarded, we have been able to supply the right solutions for the right situation. ® 655 North Hariton Street Orange, California 92868 United States of America Phone: 866.679.1366 Fax: 714.633.0470 Email: HelpDesk@ ®.com ® © 2017 All Rights Reserved. is not responsible for typographical errors found in this literature. ® TOOL DIVISION 04 Door Hardware Installation 06 Installation Templates 10 Installation Jigs 06 Installation Accessories 14 Security Door Hardware 15 Entry Armor 15 Blue Punch Key Machines 04 Blue Punch Key Machines 05 Blue Punch Accessories 05 Lock Servicing 49 Key Decoders 51 Key Hooks 51 Key Tags 51 Lock Picking 45 Safe “Butter” Bits 50 Automotive Servicing 42 Shop Tools 52 Automotive 35 Automotive Opening Kits 36 Automotive Opening Tools 40 Automotive Opening Lights 41
    [Show full text]
  • Falcon Locks Catalog
    Locks Contents 4-5 Lock type comparison chart 6 Lock type definitions and door handing diagram 7 Finish swatch reference chart 8-21 MA Series Grade 1 mortise lock 22-33 RU Series Grade 1 retrofit unit lock 34-43 T Series Grade 1 cylindrical lock 44-53 X Series Grade 1 cylindrical knob lock 54-61 K Series Grade 1 cylindrical lock 62-71 B Series Grade 2 cylindrical lock 72-83 W Series Grade 2 cylindrical lock 84-89 H2 Series Grade 2 interconnected lock 90-99 D Series Grade 1 and 2 deadbolts 100 K900 Series padlocks 101 Construction keying information sheet 102 Product identification example www.falconlock.com US 877.671.7011 Canada 800.900.4734 www.youtube.com/falconhardware Falcon "How To" app 2 • Falcon • Locks The Falcon difference Safety, security and uncompromising value At Falcon, we know that every product you sell not only has to meet local building codes, but also your expectations for performance and quality. We take your expectations seriously, and that’s why we build our locks to deliver durability, convenience and unmatched value. After all, we’ve built our reputation on the same standards that you have – providing quality products at a reasonable price and delivered on time. It’s the way we do business and it’s what makes Falcon locks a powerful choice no matter your project. Locks • Falcon • 3 Lock type comparison Lock type type Lock comparison chart comparison Falcon offers a variety of Grade 1 and Grade 2 cylindrical, deadbolt, mortise, interconnected, and extra-heavy duty finish chart Glossary and and Glossary pre-assembled unit locks that fit a variety of applications and door functions.
    [Show full text]
  • AM/BM Series Mortise Locks Premier Product
    21 AM/BM Series Mortise Locks Premier Product Arrow mortise locks are intended for heavy duty use in schools, hospitals and commercial buildings where security, durability and low maintenance are required. They are engineered for strength and performance, and precisely manufactured to exacting standards. Certificatio n/ Compliance: u ANSI Meets A156.13 Series 1000, Operational Grade 1. ADA/Americans with Disabilities Act: Federal Acceptable Door Hardware: Section 4.13.9 Meets FF-H-106C, Series 86 and 87. Handles, pulls, latches and other operating devices on accessible doors UL/ULC Positive Pressure shall have a shape that is easy to grasp with one hand and does not All locks listed for A Label and lesser class doors, 4" (122cm) x 10" require grasping, tight pinching or twisting of the wrist to operate. Lever (305cm) single or 8" (244cm) x 10" (305cm) pair. Letter F and UL operated mechanisms, push-type mechanisms and “U” shaped handles symbol on armored front indicate listing. California State are acceptable designs. Reference Code All levers with returns comply; levers return to u Look for the universal symbol next to Arrow products within 1/2" (13mm) of door face. that comply with ADA accessibility requirements. Features: Handing – Handed; field reversible. The lockset can be re-handed Strike – Wrought brass, bronze or stainless steel. ANSI straight lip without disassembling the lock case. standard, 4-7/8" (124mm) x 1-1/4" (32mm) 1-1/8" (29mm) lip Door Thickness – 1-3/4" (4mm) standard. to center. Optional strikes, lip lengths and ANSI wrought strike box available. Backset – 2-3/4" (70mm).
    [Show full text]
  • American Lock Service Manual
    Table of Contents Padlock Servicing Procedures Series A700 . 2 Series A748 . 3 Series A780, A790 . 4 Series A1000, A5000, A6000 . 5 Series A5400, A6400 (Stainless Steel). 6 Series A1405 . 8 Series A2000 & A2010 . 9 Series A2500 . 10 Series A3100, A3200, A3500 (Interchangeable Core – IC). 11 Series A3600 and A3700 (Key-In-Knob – KIK) . 12 Series A3800 . 13 Series A3900 . 14 Series A7000 (Tubular) . 15 Series AH10 (Blade) . 16 Series AL50 . 17 Weatherbuilt Covers. 18 Service Parts Actuators American Lock Actuators. 20 Actuators for Master Lock Cylinders. 22 Drivers . 23 Cylinders Pin Tumbler . 24 BumpStop™ Mechanism. 25 Interchangeable Core . 26 Door Hardware Multi-Cylinders . 26 Edge™ Key Control Cylinders . 27 Edge™ System Master Keying. 27 Rim, Mortise & KIK Cylinders . 28 Door Hardware Component Parts. 29 Tubular. 30 Disc Tumbler . 31 Retainers & Trap Doors . 32 Keys . 33 Bitting Specifications . 34 Lock Lubricants . 34 Service Kits . Back Cover 1 American Lock Series A700 Disassembly • Unlock shackle Shackle • Use a Phillips screwdriver to remove security screw • Remove security nut and trap door • Remove cylinder and anti-bypass plate Ball • Place lock on flat surface and close shackle Bearings • Actuator and ball bearings should fall out, if not, Steel Body see page 20 • Remove shackle retaining screw, (APKG4765010) Actuator Anti-Bypass • Remove shackle and spring Plate Security Assembly Cylinder Screw • Insert shackle spring and shackle • Insert and tighten shackle retaining screw Shackle Spring • Insert ball bearings Security Nut • Insert actuator as shown Trap • Check operation with follower tool Door • Insert cylinder and rotate clockwise • Insert trap door • Insert security nut and screw NKR • Tighten security screw • Check operation NRK Shackle Shackle Actuator Ball Model Spring Bearings Diameter Length Part No.
    [Show full text]
  • Installation Kit for Adams Rite Locks
    SPECIALTY PRODUCTS FOR THE PROFESSIONAL L30OCKSMITH ajor Manufacturing was created in 1976 as a subsidiary of Major Lock Supply. In M1992 the company was split off from Major Lock Supply and restructured to better serve the trade by providing specialty installation equipment, servicing tools and supplies not otherwise commercially available to the professional locksmith and installer. Major Manufacturing is headed by Bill DeForrest, a professional in the security field with over thirty years of hands-on experience in locksmithing, wholesale distribution, equipment design and production. This year again, we are pleased to announce the release of many new additions to our catalog. We do our utmost to provide quality tools and supplies needed by our changing industry. And as always, we continue to manufacture the tried and true products that you can rely on. From our signature product, the Kee-Blok, to the multi- faceted Hardware Installation Tools (HIT Series), you can be assured that the name Major Manufacturing is a name synonymous with quality. We hope you will find our catalog a resourceful guide for locating the tools and products required for your next project. Our priority is to continue to add quality tools and supplies to our growing product line. If you have any new ideas for new products, please let us know! For new product updates and the latest up to the minute information, please sign up for e-mail bulletins at www.majormfg.com. Thank you for interest in our company, we look forward to supplying your needs. 2 INDEX BY DESCRIPTION ADAMS RITE MOUNTING BRACKET .
    [Show full text]