Light Duty Questionnaire

NAME ______

DATE ______

LIGHT DUTY QUESTIONNAIRE

1. Have you ever worked on any light duty suspensions? ______If no, skip to question #2.

1a.Have you ever worked on coil springs or used a coil spring compressor? ______

1b.Have you ever replaced struts on a vehicle? ______

1c. Have you ever repaired or replaced leaf springs? ______

1d.Have you ever replaced ball joints of any type? ______

1e.Have you ever worked with any type of auxiliary suspension kits, load boosters, or lift/leveling

kits? ______If so, please describe.

2. Have you ever worked on any light duty steering components? ______If no, skip to question #3.

2a.Have you ever replaced tie rod ends, drag link assemblies, etc? ______

2b.Have you ever replaced idler arms or pitman arms? ______

2c. Have you ever replaced king pins? ______If so, do you have any experience with boring

and sleeving axles and spindles? ______

2d.Have you ever performed a vehicle alignment? ______If so, please describe the

equipment used and the degree to which you have been exposed to this work. 3. Have you ever worked on any light duty brake components? ______If no, skip to question #4.

3a.Have you ever replaced pads, rotors, calipers, hardware, etc? ______

3b.Have you ever replaced shoes, drums, wheel cylinders, etc? ______

3c. Have you ever replaced flex lines, made custom brake lines, etc? ______

3d.Do you have any experience bleeding hydraulic brake systems? ______

4. Do you have any experience with aftermarket accessories or equipment? ______If no, skip to question #5.

4a.Have you ever installed or repaired snowplows or salt spreaders? ______If so, what

make or model. ______

4b.Have you ever installed rooftop lights, brake controllers, trailer hitches, auxiliary worklights,

etc? ______Please describe any other electric type experience you may have.

4c. Have you ever installed window protectors, toolboxes, bug deflectors, rain gutters, or step

bars? ______

4d.Do you have any experience installing any type of truck body? ______If so, please

describe.

5. How many years experience do you have using a cutting torch? ______

6. Do you have any welding experience? ______If so, please describe.

7. Do you have a valid New York State Inspector license? ______