Operator Evaluation Form

START TIME: ______END TIME: ______TOTAL TIME: ______OPERATOR: ______DATE: ______BUS NUMBER: ______EVALUATOR: ______LOCATION: ______

TYPE: BTW Training On board Trail Check Post Accident Return LOA Re-Hire CADETING

ROUTE DRIVEN: ______VEHICLE TYPE: ______Lift ______BRAKE TYPE: Air Brake Hydraulic Brake Driving Evaluation = Meets Expectations  = Needs Improvement N/A = Not applicable

  N/A Views path before backing Backs slowly using all mirrors Pre-Trip Inspection Uses horn and hazards to warn others Completes appropriate brake test Backs no further than necessary Completes outside pre-trip Knows rear-end clearance to fixed objects Completes inside pre-trip Backs from driver’s side when possible Completes pre-trip form Uses proper steering in relation to rear wheels Preparing to Drive Uses backing weave where practical Checks mirror adjustment Follows all local backing requirements Scans mirrors before moving Turning Skills Turns headlights on before departure Approaches turn from proper lane Uses seat belt appropriately Turns into proper lane Adjusts driver’s seat Establishes proper lane position before Re-checks gauges before departure turning Passenger Management Maintains clearance and performs square Demonstrates passenger courtesy/assistance turns Deals with passenger inquiries effectively Uses appropriate speed when turning Assists passengers on board when necessary Uses reference points when turning Monitors passenger safety Uses mirrors appropriately when turning Radio Procedures Intersections Proper pickup and drop notification Approaches intersections cautiously Uses radio appropriately Covers brake when entering intersection Communicates effectively Obeys all traffic controls Follows established procedure Is aware of stale and fresh green lights Grants right of way to pedestrians and other Defensive Driving vehicles Looks Ahead Stops completely behind stop sign/stop line Looks Around Does not start too soon after green light Leaves Room Scans intersections before moving Communicates with other Drivers Checks mirrors before moving Covers the brake when necessary Uses proper hand positions on steering Braking wheel Brakes smoothly to stop (no rebound) Has appropriate clearance on sides of bus Brakes early to avoid unnecessary wear Accelerates / brakes and reacts smoothly Understands braking system of bus being used Uses signals appropriately Is able to panic stop and use emergency Uses horn appropriately Obeys speed limit Maintains proper following distance Uses proper passing procedures stopping system Slows and covers brake at stale green light Stays in appropriate lane for conditions Displays courtesy to other drivers and conditions   N/A Backing Skills Backs only when necessary Uses appropriate lane Uses appropriate warning lights Stops at appropriate distance (15 to 50 feet)   N/A Shuts off all noisy accessories Passenger Pick Up / Drop Off Displays correct use of door and windows Uses all appropriate signals prior to stop Asks passengers to be quiet Selects a safe position for stop Looks and listens in both directions for train All appropriate warning lights are on Ensures clearance for vehicle after crossing Proper position to curb at stop tracks Monitors traffic at stop Uses lowest gear when crossing tracks ADA Announcements made Is aware of different types of tracks Uses door safely at stop Re-enters traffic safely using appropriate Passenger safety is monitored signals Passenger / Traffic check performed Wheelchair Procedures Signals to move into traffic Places wheelchair on lift properly Merges smoothly into traffic Uses proper load / unload procedures Railroad Crossing Secures the chair properly Uses tie-downs and ramp covers properly Passenger lap and shoulder strap used Secures the vehicle when leaving seat (takes key) Understands emergency-manual lift operation Positions vehicle properly at loading zones Engine / Transmission Skills Uses appropriate gears Does not over rev engine Monitors idling time Monitors gauges while driving Comes to a complete stop before changing from reverse to forward and vice versa Downshifts when needed / appropriate

  N/A Hill and Mountain Driving Maintains proper speed for conditions Maintains proper following distance for conditions Appropriate gear selection for up and down grades Curbs tires appropriately Uses proper lane Uses caution on hills, curves and no passing zones Uses proper chain procedures when applicable Avoids roll back on hills Mountain certified drivers must demonstrate ability to install, remove, and stow chains Post -Trip Inspection Does inside / outside post trip Secures the vehicle Completes all paperwork Professionalism and Appearance Carries appropriate license / certificate Carries company identification Dresses in accordance with company policy Wears appropriate footwear Personal hygiene acceptable Maintains vehicle cleanliness Overall Operator Performance Evaluation Overall Evaluation: Meets Expectations Needs Improvement

Specific Areas of Concern:

Corrective Action:

Evaluator’s General Comments:

I certify that this evaluation has been discussed with me. I understand my signature does not necessarily indicate agreement with the content of the evaluation. Operator Signature ______Date: ______

Recommended Training Plan Activity Time Required Scheduled Date Completed Date

SM Signature ______Date Reviewed ______