1. a Normal Edge Is a Line That Is ______To the Plane of Projection

Multiview Projection Worksheet

Name:______

1. A normal edge is a line that is ______to the plane of projection.

2. In theory, the lines of sight are considered to be ______.

3. The plane of projection on which the top view is projected is called ______

4. What can the draftperson do to minimize confusion between first and third angle projection?

______

5. There are three methods to transfer depth dimensions, Name them:

a.______b.______c.______

6. There are four steps to placement of views in Mechanical drawing. Name them:

7. What is the major reason to use revolution conventions in drafting? ______

8. (True False) An experienced designer or engineer will usually look at a multiview drawing and

instantly and easily visualize the object represented.

9. A straight line always projects as a ______or as a ______.

10. The single view of an object will frequently permit a multitude of different interpretations. What is

needed to limit these interpretations? ______

11. A plane surface, parallel to a plane of projection is termed as ______.

12. Imagine view of a cylinder being cut by an inclined plane. If the this cut appears as a straight inclined

line in the front view, how will it appear in : the top view: ______

the right side: ______

13. At what point above is a line missing? ______

14. What angle is angle A typically drawn at? ______

15. What angle is angle B typically drawn at? ______

16. Define "runout"