GLEN RAVEN, INC. 5/30/2008 MASTER SPECIFICATIONS GLEN RAVEN EXTERIOR FABRIC MATERIALS

1.3 DEFINITIONS 1831 North Park Avenue Glen Raven, NC 27217-1100 USA Note to Specifier: The International Building Code defines “awning” as follows:

A. Awning: An architectural projection that provides weather protection, identity, or decoration and is wholly supported by the building to which it is attached. An awning is comprised of a lightweight, rigid skeleton structure over which a covering is attached. SECTION 107310 – EXTERIOR FABRIC Telephone: (336) 586-1629 Facsimile: (336) 226-8133 1.4 PERFORMANCE REQUIREMENTS Internet Websites: PART 1 - GENERAL A. Structural Performance: Provide exterior fabric capable of withstanding the effects of gravity loads and the following loads and stresses within limits and under conditions 1.1 RELATEDindicated: DOCUMENTS

NoteA. to Specifier:Drawings Edit and the general following provisions to conform of theto Project Contract, requirements. including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section. 1. Wind Loads: Determine loads based on the following minimum design wind pressures:

1.2 SUMMARYa. Uniform pressure of [_____ lbf/sq. ft.] [______Pa], acting upward or downward. A. This Section includes: Note to Specifier: Delete above or below. 1. Exterior fabric for application to awning frames. 2. Exterior fabric for application to canopy frames. b. Uniform pressure as indicated on Drawings. 3. Exterior fabric for application to walkway frames. 4. Exterior fabric for application to exterior sun control devices. 1.5 SUBMITTALS5. Exterior fabric for application on outdoor furnishings.

A.B. ProductRelated SectionsData: Include include: exterior fabric description, fabrication and construction details, dimensions and profiles, features, and finishes. Note to Specifier: Edit the following list of sections to include only those that are required for the project.B. ListSamples other sections for Initial that Selection: directly relate For each to the application, work of this color section. and finish of exterior fabric:

1. SamplesDivision 05 of Sectionexterior "Metalfabric appliedFabrications" graphics for andblocking, text. shims, reinforcing, and 2. Samplessupplemental of exterior support fabric members accessories for connecting involving to color [awning selection.] [sun control devices] frame and anchorage. 2. Division 10 Section “Awnings” for exterior awning frames. 3. Division 10 Section “Canopies” for exterior canopy frames. 4. Division 10 Section “Walkway Coverings” for walkway covering frames. 5. Division 10 Section “Exterior Sun Control Devices.” 6. Division 12 Section “Fabrics” for other fabrics. 7. Division 12 Section “Window Shades” for window shade applications. 8. Division 12 Section “Site Furnishings” for furnishings using exterior fabric. www.glenraven.com and www.sunbrella.com

EXTERIOR FABRIC 107310 - 1 GLEN RAVEN, INC. 5/30/2008 MASTER SPECIFICATIONS GLEN RAVEN EXTERIOR FABRIC MATERIALS

2.2 EXTERIOR1.5.1.8 MaintenanceWARRANTY FABRICSDurability/Average of exterior Lifespan: fabrics. Five to Ten years, depending upon climate and 2. Cleaningproper information application and of fabric. precautions for exterior fabrics. NoteA. to Specifier:6.Product: Underside: Verify Provide with HUVSame Owner Firesist as thattop Awningsurface.warranties Fabric. required herein do not conflict with remedies availableG. 7. toWarranty: OwnerSurface: Manufacturer’sunder Plain laws weave, governing standard excellent project warranty. breathability. location. Coordinate with requirements of Division 18.1. Sections. TransparencyGeneric Classification: Level: Light 100% colors Inherently translucent Fire Retardant to natural Polymer.and artificial light. 9.2. AbrasionDescription: Resistance: Woven fabric ASTM made D4157-92, of 100% 40,000 SEF/FR cycles Self-extinguishing warp and filling. fibers. 1.6A. QUALITY 10.3.Fabric ASSURANCEDimensionalWeight: Manufacturer’s +/- 9.5 Stability: oz. per Warranty: sq.Good. yd. (269Some Manufacturer's gm shrinkage per sq. meter). in standardhot weather, warranty some stretch in which in 4.manufacturer coldWidth: or 60damp and inches weather. fabricator (152.4 cm). agree to repair or replace exterior fabric material or A. 11.5.workmanshipFabricator FlameColor Qualifications: Fade Resistance that Resistance:fails within (FR): Employ specified UVNot resistant.flame workers warranty retardant. Most skilled period. colors in production tested up toof 1500 custom-fabricated hrs in SAE 12.products Mildew1960J similar fadeometer Resistance: to those with Fabric requiredminimal will not or for nosupport thischange. Project, growth Fade of with resistantmildew. a record Mildewto most of growing chemicals. successful on 1.6.performance. FailuresforeignDurability/Average matter include, attached but Lifespan: are to not fabric limitedFive is to easily to, Ten the years,removed. following: depending upon climate and 13. properChemical application Resistance: of fabric. Highly resistant to acids, alkalis, and solvents. Note 7.14.to Specifier: a.Underside:Water RetainDeterioration Repellency: Same below as Excellent.forof top fabric large surface. includingor complex seam installation failure. projects. 8.15. Surface:Oil Repellency: Plain weave, AATCC breathable. 118-1997 Grade 5. 2.1.9.16. Fabricate ExteriorTransparencySewability: exterior Fabric Excellent. fabric Level: Warranty products Light Period: colors using Five translucent a Master years fromFabric to natural date Craftsman of and Substantial artificial fabricator, light.Completion. certified 10.17. by theAbrasionHeat Industrial Sealing: Resistance: Fabrics Can be Association ASTMheat sealed D4157-92, International. using 40,000 sealing cycles tape andwarp heat and sourcefilling. such as Note to Specifier:11. Flexibility:radio Delete frequency belowWill not bar if cracksewn type orwelder.seams peel in and hot hemsor cold are conditions. not used. If other seaming and B. Source Limitations: Obtain exterior fabrics from one supplier and a single hemming12.18. system FabricWarranty: is used, Identification insertFive Year seaming Method:limited and warranty. hemmingContrasting system marker and yarn warranty in selvage period. for positive manufacturer. yarn identification. C. Color:3. SunbrellaThread colorWarranty and Period: pattern Five Number years from [Insert date catalogof Substantial pattern Completion. and color Note 13.tonumber Specifier: Flame]. Retain Resistance below (FR): if required Fabric by does authorities not melt having drip and jurisdiction. is inherently flame retardant passing the following FR requirements: Note to Specifier:a) UseCalifornia below State for appliedFire Marshal’s vinyl graphic Test Procedure materials; #801. consult Title fabricator 19 (19 CCR for sother graphicC.D. applicationRegulatoryGraphic Application:warranties. Requirements: [Insert Providedescription awnings]. that comply with or exceed requirements of [Insert 1237).Building Code requirements] [and] [applicable ordinances]. E. Inset Fabric:b) NFPA [Heat-sealed 701 (Test ]Method [Sewn-in 1).] process. 4. Graphicsc) ASTM Warranty E84-05: FlamePeriod: spread Outdoor and durability smoke density not less Class than A. [five ] [three] [Insert Note to Specifier: Retain below if flame-resistant fabrics are required for exterior installations. numberd) FAA ]25.853 years frominterior date aircraft of [Substantial textiles and] [ Finalfurnishings.] Completion. HUVF. FiresistThread: fabric UV-light, has fiber-integral mildew, flame and rot resistance, resistant, tested as recommended and approved byfor Sunbrellaexterior use. for e) FMVSS302: Auto, bus and train. AppliedB. fire-resistance[applicationAwning] [Canopyof treatmentsexterior] [fabric.______do not ]have Manufacturer’s equal weather Warranty: resistance Manufacturer's or durability standardto HUV f) UL214 certification (USA). Firesist andwarranty may not in comply which with manufacturer applicable codesand fabricator and ordinances agree tofor repairthe life or of replacethe installation. defective g) CPAI-84 1995: Tent walls and roof. assembly material or workmanship that fails within specified warranty period. PART 3 - EXECUTION (Not Used) D. Fire-Test-Response Characteristics: Provide exterior fabrics with fire-test outcome 14.1.indicated, MildewFailures as Resistance:tested include, using but Fabric areidentical not will limited products not support to, theand following:growth UL or ofother mildew. test agencyMildew testgrowing method on indicated:foreign matter attached to fabric is easily removed. END OF SECTION 107310 15. a.Chemical Deterioration Resistance: of assemblyHighly resistant components. to acids, alkalis, and solvents. 1.16. Flame-ResistanceWater Repellency: Ratings: Excellent. Passes [NFPA 701] [Office of the State Fire Marshal of 2.17. the WarrantyOilState Repellency: of ______Period: AATCC ].Five years 118-1997 from Gradedate of 5. Substantial Completion. 2.18. PermanentlySewability: label Excellent. exterior fabric indicating that fabric is inherently and permanently 19. flameHeat resistant Sealing: and Can period be heat of effective sealed usingfire-resistance. sealing tape and heat source such as NotePART to 2 -Specifier: PRODUCTSradio Above frequency may bebar deletedtype welder. if colors and other characteristics are specified or scheduled.20. Below Warranty: may be retainedFive Year with limited or without warranty. above. 1.7 PROJECT CONDITIONS 2.1C.B. MANUFACTURER SamplesProduct: Providefor Verification: Sunbrella For Awning each exteriorFabric. fabric selected or required. A. Weather Limitations: Do not proceed with installation unless existing and forecast D. 1.Exteriorweather Manufacturer:Description: Fabric conditions Schedule: Woven Subject permit Usefabric to installationcompliancedesignations made of 100% with ofindicated exteriorrequirements,Sunbrella on Drawings. fabricsacrylic provide fibers, in complianceexterior finished fabric with with a manufacturers'productsfluorocarbon bywritten Glen finish. instructions Raven, Inc., and 1831 warranty N. Park requirements. Avenue, Glen Raven, North E. 2.Product CarolinaWeight: Certificates: +/- 27217. 9.0 oz. Tel: Manufacturer’s per 336-227-6211; sq. yd. (255 certification gm Fax: per 336-229-4039. sq. thatmeter). each Websites: type of exterior fabric 3.complies www.glenraven.comWidth: with 46 requirements. inches (116.8 and cm) www.sunbrella.com. or 60 inches (152.4 cm). 4. Color Fade Resistance: UV resistant. Most colors tested up to 1500 hrs in SAE F. Maintenance1960J and fadeometer Cleaning withInstructions: minimal Manufacturer’s or no change. recommendations, Fade resistant including: to most chemicals.

EXTERIOR FABRIC 107310 - 2