Euroguard Fencing

Jacksons Fencing Q40 Specification

EuroGuard Fencing (EuroGuard Flatform Heavy)

Product reference: EuroGuard Flatform Heavy

• Type: [Flatform heavy]. - 1000, 1200, 1400, 1800, 2000 or 2400 mm high.

• Gates: [ ______] - To suit fence height.

• Type: [Cantilevered sliding]. - Height to match fence, single or double leaf. [Swing]. - Height to match fence, single or double leaf. [Tracked sliding]. - Height to match fence, single or double leaf.

- Height: [??? mm].

• Operation: [Automatic]. [Manual]. [Rear mounted operator]. [Safety-glide in-stile operator]. [Sliding Gate Operator]. [Underground operator].

• Control: [Card systems]. [Ground Loops]. [Hard-wired audio intercom]. [Hard-wired video intercom]. [Key fob]. [Key pad]. [Key switches]. [Photocells]. [Push button]. [Safety edges]. [Time Clocks]. [Token reader]. [Traffic lights].

• Finish/ Colour: [Black RAL 9005]. Jacksons Fencing Q40 Specification [Blue BS 20-C-40]. [Blue RAL 5010]. [Brown RAL 8017]. [Green RAL 6005]. [Grey RAL 7012]. [Red RAL 3020]. [White RAL 9010]. [Yellow RAL 1018]. [Manufacturer’s standard]. - Galvanized.

• Accessories: [None]. [Concave topper panel]. [Convex topper panel]. [Wave topper panel].

As standard

Panel width:

 Flatform medium and heavy: 2500 mm.

Posts:

 Flatform height 3000 mm. 80 x 60 mm

Flatform Heavy:

Flat profile with double horizontal wires as opposed to the Regular and Extra panels. Ideal for sports grounds as a rebound fence, light commercial sites or similar.

Finish/ Colour:

 Posts are galvanized to BS EN 1461 as standard or can be powder coated to BS EN 13438 in any other BS or RAL colour at extra cost.

 Panels are Jakcoate zinc alloy coated as standard or can be Galvanized to BS EN 1461 and can be powder coated to BS EN 13438 in any other BS or RAL colour at extra cost.

Gates:

Swing and sliding gates available as single or double leaf with manual operation or automated.

- Swing:

180° opening, tamper proof hinges. 60 x 40 mm rails, 60 x 60 mm stiles. Square posts subject to size of gate.

 Size (h x w): 3000 x 10000 mm (maximum).

 Single gates are supplied as right hand hanging, opening inwards and are complete with key lock, handles and gate stop. Jacksons Fencing Q40 Specification

 Double gates are supplied complete with keylock, handles, centre gate stop and drop bolts.

- Cantilever sliding:

Ideal for application where space is limited. Heavy duty carriage for smooth, quiet operation. 60 x 40 mm rails, 120 x 80 mm portals.

 Size (h x w): 3000 x 30000 mm (maximum).

 Supplied complete with key in lock and handles.

- Tracked sliding gates:

Available as special order operating on level ground if required for exceptionally heavy designs or where a single leaf gate exceeds 15000 mm.

- Finish/ Colour:

All gates galvanized to BS EN 1461 as standard or can be powder coated to BS EN 13438 in any BS or RAL colour at extra cost.

Accessories:

Topper panels are available to provide Flatform heavy panels with a decorative, distinctive look. Framed with light weight capping to prevent injury on low level fencing.

Installation In accordance to manufacturers instructions