EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
1. PREFACE 1.1 Orders are accepted in accordance with ArcelorMittal South Africa’s General Conditions of Sale and prices VAT exclusive. 1.2 All prices are subject to a settlement discount of 2,5%, provided payment is made in accordance with ArcelorMittal South Africa’s General Conditions of Sale. 1.3 All items are subject to “overage” and “underage”. Refer paragraph 3.2 (page 2). 1.4 Material addressed by this price list is sold at a price per metric ton (1000kg) on gross mass as recorded on the assized mass meter or weighbridge at the works. 1.5 Unless otherwise stated, extras or deductions quoted in this price list are per metric ton and each extra or deduction is separate and explicit. 1.6 Normal testing and inspection as outlined in the specifications are carried out. When additional inspection, testing or processing is required, extras will be charged. 1.7 Prices and extras or deductions are those ruling on date of confirmed delivery and are subject to change without prior notice. 1.8 When placing orders, customers must always specify the end use and ensure that this is compatible with the ordered quality or specification. ArcelorMittal South Africa will then endeavour to deliver the material "fit for purpose". However, if the end use is in general terms such as "stock", or "general engineering", the product quality control will be in terms of the quality or specification only. 1.9 After orders have been accepted and confirmed, they cannot be cancelled in whole or in part or altered in any manner whatsoever, except by special agreement with ArcelorMittal South Africa in writing. Should an order be modified, the order as amended, it will be re-priced. 1.10 The publication of this price list does not place ArcelorMittal South Africa under any obligation to supply the quoted qualities and sizes at all times. Availability remains subject to confirmation and the stipulations in both the price list and relevant data sheets. 1.11 Before processing material, customers must ensure that it meets their requirements. Non-compliance in this regard may invalidate a claim. ArcelorMittal South Africa does not prescribe any particular checking or testing methods. Visual checks, simple dimensional checks and reference to test certificates and/or orders should be performed beforehand.
2. PRICE INFORMATION (Definitions)
2.1 ITEM An item is a product of a single technical specification (i.e. a single quality, width, thickness, zinc coating specification, coil size and packaging, surface finish or condition, and any additional processing parameters required or requested.)
2.2 ITEM EXTRAS Item extras apply to the total number of full slab coils ordered per item for delivery in a given calendar month. Only identical items (full item description) will be combined for item extra determination (Best Tonnage Ordered “BTO”)
2.3 BASE PRICE Price is per metric ton in coils for consigning address in RSA, Botswana, Swaziland and Lesotho. Destination to Namibia available on enquiry only.
3. GENERAL INFORMATION 3.1 MINIMUM ORDER QUANTITY The minimum quantity per item ordered shall be in accordance with the following: Standard items Other items One Full slab coil Two full slab coils Refer to Annexure 2 (page 10) for applicable full slab coil mass according to width and Annexure 1 (pages 8 - 9) for Standard items.
2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 1 Page
EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
3.2 OVERAGE/UNDERAGE Please also refer to Annexure 3 (page 11) for tables. The principle of delivering the proceeds of full slab coils is applicable in all cases.
3.2.1 OVERAGE: a) Ordered mass plus 10%, applicable for cases where less than 10 full slab-coils is ordered per item. This will be adjusted if a customer elects to have the underage adjusted as described in 3.2.2 c (for standard items and other items) b) Ordered mass plus one full slab coil, for cases where 10 or more full slab-coils per standard item are ordered. For non-standard items an Overage of +10% will be allowed.
3.2.2 UNDERAGE: Standard items: a) For cases where only one full slab-coil is ordered, the Underage allowed is ordered mass minus 25%. b) For cases where more than one full slab-coil is ordered, the Underage allowed is ordered mass minus one maximum full slab-coil (nominal mass plus 10%). c) However, in the case of standard items 2 to 4 slab-coil orders, customers may elect to have the Underage adjusted to 50% of a full-slab-coil below the ordered mass. In such a case the Overage will be adjusted to 60% of a full-slab-coil above the ordered mass. In this case the item extra for the whole order will be based on the increased order quantity, should the delivered mass exceed the originally ordered mass by more than a ½-slab coil. Other items, not listed as standard items: a) The Underage allowed is ordered mass minus one maximum full slab-coil (nominal coil mass plus 10%) when less than 10 full slab coils are ordered. b) If 10 or more full slab coils are ordered, the Underage allowed will be minus 10%. c) However, in the case of other available (non-standard) items 2 to 4 slab-coil orders, customers may elect to have the Underage adjusted to 60% of a full-slab-coil below the ordered mass. In such a case the Overage will be adjusted to 110% of a full-slab-coil above the ordered mass. In this case the item extra for the whole order will be based on the increased order quantity, should the delivered mass exceed the originally ordered mass by more than a ½-slab coil. d) In cases where the underage applied results in less coils delivered than the original order, no penalty due to the reduced order quantity will be applied. e) A replacement order for the proceeds of two slab-coils may be placed at an item extra equal to the original order, should the underage applied result in less material delivered than originally ordered.
3.3 MASS OF COILS 3.3.1 Mass of individual coils: Orders for coils with a specified exact mass will not be accepted. Coils may be ordered to the nominal full coil mass as per ruling mass tables, or smaller split coils (half size). Customers must indicate the maximum coil mass that can be handled to ensure the correct selection of available options. 3.3.1.1 Full mass coils: Defined as coils with a mass of at least 75% and a maximum of 110% of the specified nominal mass as per ruling coil mass tables. 3.3.1.2 Light mass coils: Defined as coils with a mass less than full mass coils, but at least 60% of the nominal mass per ruling coil mass tables. 3.3.2 Mass of all coils for the ordered item: Despatch will take place as follows: a) At least 80% of the ordered mass in full mass coils b) Not more than 20% of the ordered mass in light mass coils
2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 2 Page
EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
4. QUALITY EXTRAS Available Quality Extra Quality Specification Slab R/t (VAT Code Widths excl)
4.1 COMMERCIAL GRADES ISQ 230 960; 1000; 1100; 1300; 1400; 1600 007 000 35 ISQ 300 Gauges 0,4; 0,5; 0,53; 0,58mm; 960; 1000; 1100; 1300; 1400; 1500; 1600 005 000 90 0.80; 1,00; 1,20mm ISQ 550 Gauges 960; 1000 006 000 0 0,23,0,25;0,27;0,30;0,40mm (Application: S-Rib) ISQ 550 (3T) 960; 1000; 1100; 1300 006 001 235 Gauges 0,47; 0,5; 0,53; 0,58 mm
4.2 CARBON GRADES SAE 1006 960; 1000; 1100; 1300; 1400; 1600 395 000 200 SAE 1012 960; 1000; 1100; 1300; 1400; 1600 184 000 220 SAE 1012 (Full Hard) 960; 1000; 1100; 1300 184 001 220
4.3 DRAWING & FORMING GRADES Drawing Quality 960; 1000; 1100; 1300; 1400; 1600 086 000 240 Gauges 0,40 to 1,60mm Lock Forming Quality 960; 1000; 1100; 1300; 1400; 1600 215 000 200 Gauges 0,40 to 1,60mm
4.4 STRUCTURAL GRADES EN 10346 S250 GD 1300 904 000 115 Gauges 0,8 to 2,0mm EN 10346 S280 GD 1300; 1400 903 000 235 Gauges 0,8 to 3,0mm EN 10346 S350 GD 1000; 1300; 1400 929 000 470 Gauges 0,8 to 3,0mm EN 10346 S380 GD AMSA 1000; 1300; 1400 870 000 470 Gauges 0,80 to 3,00mm S450 GD AMSA 1300 009 000 590 Gauges 1,55 to 3,00mm EN 10346 S550 GD 1300 940 000 470 Gauges 0,58, 0,80, 1,00 & 1,20mm
2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 3 Page
EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
5. ITEM EXTRA TABLE 5.1 Roofing HDG Range Item *Standard items 2) Non-Standard items (Number of full slab coils) 1) R/ton (VAT exclusive) R/ton (VAT exclusive) 1 500 n/a 2 300 800 3 100 450 4-5 - 250 > 6 -90 160 > 10 -180 70 > 15 -250 -
*Applies to the following roofing items: Slab Width (mm) Width (mm) Thickness (mm) Coating ISQ 300 (Code 005 000) 1000 925 0,40 Z150 1000 925 0,58 Z200 Z275
ISQ 550 (Code 006 000) (Application: S-Rib) 960 762 0,23 Z80 960 762 0,25 Z100 960 914 0,25 Z100 960 762 0,27 Z100 960 914 0,27 Z100 960 762 0,30 Z100 960 914 0,30 Z100 1000 925 0,40 Z100 Z150
ISQ 550 (3T) (Code 006 001) 1000 925 0,47 Z150 Z200 Z275 1000 925 0,50 Z150 Z200 Z275 1000 925 0,58 Z275 1300 1175 0,50 Z200 1300 1175 0,58 Z200
5.2 General HDG Range 2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 4 Page
EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
Item Standard items 2) Non-Standard items (Number of full slab coils) 1) R/ton (VAT exclusive) R/ton (VAT exclusive) 1 500 n/a 2 300 800 3 100 450 4 - 250 5 -90 160 6 -180 70 > 6 -250 -
Notes: 1) Please refer to Annexure 2 (page 10) for applicable full slab coil mass according to width. 2) For all Standard items listed, please refer to Annexure 1 (Page 8 & 9) 3) All other available items not listed as Standard items. 4) Genral HDG Range: all other widths/quality combinations, this excludes Roofing HDG Range: 762mm, 914mm, 925mm, 1175mm / ISQ300, ISQ 550, ISQ550(3T)
2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 5 Page
EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
6. WIDTH / THICKNESS EXTRAS Thickness Width (mm)
(mm) 925 1000 1219 1250 762 880 914 & & & & 940 1175 1225 1320 R/ton (VAT exclusive) 0,23 2850 N/A N/A N/A N/A N/A N/A 0,25 2650 N/A 2190 N/A N/A N/A N/A 0,27 2490 N/A 2030 N/A N/A N/A N/A 0,30 2250 N/A 1795 N/A N/A N/A N/A 0,4 ♦ N/A N/A N/A 1070 1095 950 N/A 0,47 N/A 1180 N/A 980 1005 860 N/A 0,5 ♦ N/A N/A N/A 895 920 775 855 0,53 N/A N/A N/A 855 890 730 810 0,58 N/A N/A N/A 810 835 690 770 0,8 N/A N/A N/A 685 710 565 645 1,0 N/A N/A N/A 615 645 495 575 1,2 N/A N/A N/A 580 605 460 540 1,3 N/A N/A N/A 565 N/A N/A N/A 1,4 N/A N/A N/A 550 575 430 420 1,5-1.55 N/A N/A N/A N/A N/A 410 N/A 1,6 N/A N/A N/A 515 540 395 475 1,7 N/A N/A N/A 495 N/A N/A N/A 1,9 ♦ N/A N/A N/A 470 490 345 N/A 2,0 N/A N/A N/A 440 N/A 340 N/A 2,4 ♦ N/A N/A N/A 420 445 300 N/A 2,5 N/A N/A N/A N/A N/A 295 N/A 2,7 N/A N/A N/A 410 N/A N/A N/A 3,0 ♦ N/A N/A N/A 400 430 280 N/A
6. WIDTH / THICKNESS EXTRAS (Continued) Notes: 1) Dimensions are available in the above-mentioned width/thickness combinations only. (“NA” denotes “Not Available”) 2) Listing of a price extra does not necessarily imply that the set of dimensions is available for all qualities. Please refer to Datasheet and slab width availability per quality. 3) For Full Hard material: Maximum Width is 1225 Thickness 0,47; 0,5; 0,53; 0,58 and 0,8mm. 4) Gauges 2,4 & 3,0 mm are only available as hot rolled substrate (also known as “No Kinks”) 5) Please check the maximum width available for the gauges listed below: (refer to Datasheet C1.1 Table 4) Thickness (mm) Width (mm) 2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 6 Page
EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
0,4 ♦ 1219 0,5 ♦ 1320 1,9 & 2,4 & 3,0 ♦ 1225
7. PROCESSING EXTRAS 7.1 ZINC COATING EXTRAS Zinc Coating designation Thickness Z100 Z150 Z200 Z275 Z350 Z450 Z600 (mm) * R/ton (VAT exclusive) 0,23 # 1720 N/A N/A N/A N/A N/A N/A 0,25 1590 N/A N/A N/A N/A N/A N/A 0,27 1470 N/A N/A N/A N/A N/A N/A 0,3 1320 N/A N/A N/A N/A N/A N/A 0,4 990 1490 1980 2730 3470 4460 5950 0,47 N/A 1260 1690 2320 2950 3790 5060 0,5 N/A 1190 1590 2180 2770 3570 4760 0,53 N/A N/A 1500 2060 2620 3370 4490 0,58 N/A N/A 1370 1880 2390 3080 4100 0,8 N/A N/A 990 1360 1730 2230 2970 1,0 N/A N/A 790 1090 1390 1780 2380 1,2 N/A N/A 660 910 1160 1490 1980 1,3 N/A N/A N/A N/A 1090 N/A N/A 1,4 N/A N/A 570 780 990 1270 1700 1,5-1,55 N/A N/A N/A 730 N/A N/A N/A 1,6 N/A N/A 500 680 870 1110 1490 1,7 N/A N/A N/A N/A 805 N/A N/A 1,9 N/A N/A N/A 570 730 940 1250 2,0 N/A N/A N/A 550 N/A N/A N/A 2,4 N/A N/A N/A 450 580 740 990 2,5 N/A N/A N/A 440 N/A N/A N/A 2,7 N/A N/A N/A N/A 505 N/A N/A 3,0 N/A N/A N/A 360 460 590 790 Notes: *) Z600 coating only available on enquiry #) 0.23mm Z80 =1700 1) Z150 coating only available on items: Width Thickness Quality Quality Code 925 0,4 ISQ 550 006 000 925;1219 0,4 ISQ 300 005 000 925 0,47 ISQ 550 (3T) 006 001 925 0,5 ISQ 550 (3T) 006 001 2) Z100 coating only available on items: Width Thickness Quality Quality Code 762; 914 0,25; 0,27; 0,3 ISQ 550 006 000 925 0,40 ISQ 550 006 000 1219 0.40 ISQ 300 005 000
2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 7 Page
EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
7.2 SURFACE FINISH (Refer to Data Sheet C1.1) R/ton (VAT exclusive) Regular spangle 0 Flattened minimised spangle 100
7.3 OILING: With standard oil 43 Note: Not available for items: Width Thickness Quality Quality Code 762; 914 0,25; 0,27; 0,3 ISQ 550 006 000
7.4 GALVANISING LINE WELDS R/T (VAT excl) No galvanising line welds (code 3265) 131 Note: To be specified on order. No specific coil mass can be guaranteed.
8. PACKAGING EXTRAS 8.1 Only for widths 762, 880, 914, 925 and 940 mm& thickness < 0.58mm Packaging code* Non Protective Basic Protective Advanced Protective Coil size Code 08 ♦ Code 19 Code 29 R/ton (VAT exclusive) ½ Slab coil 0 21 57 Full Slab coil 0 0 57 Note: * Refer to packaging specification for description. ♦ Orders to be endorsed with standard remark 0785: “No liability accepted for wet storage stains” 8.2 Other Packaging code* Non Protective Basic Protective Advanced Protective Coil size Code 08 ♦ Code 19 Code 29 R/ ton vat exclusive ½ Slab coil 0 71 228 Full Slab coil 0 0 57 Note: * Refer to packaging specification for description. ♦ Orders to be endorsed with standard remark 0785: “No liability accepted for wet storage stains”
STANDARD ITEMS ANNEXURE 1 Slab Width (mm) Width (mm) Thickness (mm) * Coating COMMERCIAL GRADES ISQ 230 (Code 007 000) 960 880 0.47 Z275 1300 1175 0.47 Z275 1300 1225 0,50 Z200 Z275 1100 1000 0,58 Z275 1300 1225 0,58 Z200 Z275 2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 8 Page
EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
1000 925 0,80 Z200 1000 925 0,80 Z275 1300 1225 0,80 Z200 Z275 1000 925 1,00 Z275 1300 1225 1,00 Z200 Z275 1000 925 1,20 Z275 1300 1225 1,20 Z200 Z275 1300 1225 1,60 Z200 Z275 1300 1225 1,90 Z275 1300 1225 2,40 Z275 1300 1225 3,00 Z275 ISQ 300 (Code 005 000) 1000 925 0,40 Z150 1300 1219 0,40 Z100 Z150 1300 1225 0,50 Z275 1000 925 0,58 Z200 Z275 1300 1225 0,58 Z275 1300 1225 0,80 Z200 1300 1225 1,00 Z275 ISQ 550 (Code 006 000) (Application: S-Rib) 960 762 0,23 Z80 960 762 0,25 Z100 960 914 0,25 Z100 960 762 0,27 Z100 960 914 0,27 Z100 960 762 0,30 Z100 960 914 0,30 Z100 1000 925 0,40 Z100 Z150
STANDARD ITEMS (Continued) ANNEXURE 1 Width (mm) Width (mm) Thickness (mm) Coating COMMERCIAL GRADES ISQ 550 (3T) (Code 006 001) 1000 925 0,47 Z150 Z200 Z275 1000 925 0,50 Z150 Z200 Z275 1000 925 0,58 Z275 1300 1175 0,58 Z200 2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 9 Page
EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
1300 1225 0,58 Z200
CARBON GRADES SAE 1006 (Code 395 000) 1300 1219 1,20 Z450 SAE/AISI 1012 (Full Hard) (Code 184 001) 1300 1175 0,80 Z275 DRAWING & FORMING GRADES LOCK FORMING QUALITY (Code 215 000) 1300 1225 0,58 Z275 1300 1225 0,80 Z275 1300 1225 1,00 Z275 1300 1250 1,00 Z275 1300 1225 1,20 Z275 STRUCTUTAL GRADES EN 10346 S550GD (Code 940 000) 1300 1225 0.58 Z200 Z275 1300 1225 0.80 Z200 Z275 1300 1225 1,00 Z200 Z275 1300 1225 1,20 Z200 Z275
S450 GD AMSA (Code 009 000) 1300 1225 1.60 Z275 1300 1225 2.00 Z275 1300 1225 2.50 Z275 1300 1225 3.00 Z275
EN 10346 S350GD (Code 929 000) 1000 925 1,30 Z350 1000 925 1,50 Z350 1300 1225 1,60 Z275 1000 925 1,70 Z350 1300 1225 1,90 Z275 1000 925 2,00 Z350 1300 1225 2,40 Z275 1000 925 2,50 Z350 2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 10 Page
EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
1000 925 2,70 Z350 1000 925 3,00 Z350 1300 1225 3,00 Z275
EN 10346 S380GD AMSA (Code 870 000) 1000 925 1,30 Z350 1000 925 1,50 Z350 1000 925 1,70 Z350 1000 925 2,00 Z350 1000 925 2,50 Z350 1000 925 2,70 Z350 1000 925 3,00 Z350
Requests for additional Standard items can be made via your Account Manager. Such requests will be submitted for evaluation and approval by ArcelorMittal South Africa Management.
2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 11 Page
EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
COIL MASS TABLES ANNEXURE 2
FINAL PRODUCT WIDTH NOMINAL SLAB WIDTH (mm) FULL-SLAB-COIL MASS (ton) 960 # (762 to 920) # 17
1000 925 to 960 18
1100 965 to 1060 20 1200 1065 to 1160 21 1300 1165 to 1260 22 1400 1265 to 1360 23 1500# 1365 to 1460# 25 1600 5-skid 1465 to 1560 24 1700 5 skid # (1565 to 1600) # 25 Tolerance on coil mass: +10% -25% (Light mass – 40%)
Note: # These widths are available for approved enquiry orders only
Availability of widths is restricted by the combination of: a) Dimensions shown in Width-Thickness Extra Table (Paragraph 6 Page 5) b) Slab width availability in Quality Extra Table (Paragraph 4, Page 3), c) Specific restrictions per Quality (Please refer to Datasheets)
2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 12 Page
EXTRAS LIST 140 GALVANISED SHEET IN COIL Effective: 01 APRIL 2018 REV2
OVERAGE / UNDERAGE ANNEXURE 3
(DESPATCH TOLERANCES ON ORDER TONNAGE PER ITEM)
The principle of a discrete full-slab-coil as smallest sales unit applies (Please also refer to text on paragraph 3.2, page 2).
STANDARD ITEM Number of STANDARD ITEM OPTION2 (Code2010) Full Slab Coils* %OVER / % UNDER %OVER / % UNDER 1 +10/-25 Not Applicable 2 +10/-55 +30/-25 3 +10/-37 +20/-17 4 +10/-28 +15/-13 5 +10/-22 6 +10/-18 7 +10/-16 N/A 8 +10/-14 9 +10/-12 10 +10/-11 >10 +1 FSC / - 1,1 FSC* Note: * FSC = Full Slab Coil
NON-STANDARD ITEM Number of NON-STANDARD ITEM OPTION2 (Code1020) Full Slab Coils %OVER / % UNDER %OVER / % UNDER 2 +10/-55 +55/-30 3 +10/-37 +36/-20 4 +10/-28 +27/-15 5 +10/-22 6 +10/-18 7 +10/-16 8 +10/-14 N/A 9 +10/-12 10 +10/-11 >10 +10/-10
2018-04-01 REV2 Cancels and supersedes issue dated 2018-04-01 REV1 13 Page