Resilient and Lvt Flooring

SECTION 09660 RESILIENT AND LVT FLOORING

Display hidden notes to specifier. (Don't know how? Click Here)

PART 1 GENERAL

1.1 SECTION INCLUDES

1.A. Luxury vinyl tile and plank flooring.

1.B. Luxury vinyl tile floating flooring.

1.C. Resilient flooring.

1.2 RELATED SECTIONS

2.A. Section 03300 - Concrete: Subfloor requirements as a flooring substrate.

1.3 REFERENCES

3.A. ASTM International (ASTM): 3.A.1. ASTM D2047 - Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine. 3.A.2. ASTM D3389 - Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader). 3.A.3. ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials. 3.A.4. ASTM E648 - Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source. 3.A.5. ASTM E662 - Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials. 3.A.6. ASTM F137 - Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus. 3.A.7. ASTM F970 - Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading. 3.A.8. ASTM F925 - Standard Test Method for Resistance to Chemicals of Resilient Flooring. 3.A.9. 09660-1 ASTM F1514 - Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change. 3.A.10. ASTM F1515 - Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change. 3.A.11. ASTM F1914 - Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering. 3.A.12. ASTM F2055 - Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method. 3.A.13. ASTM F2199 - Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat. 3.A.14. ASTM F2421 - Standard Test Method for Measurement of Resilient Floor Plank by Dial Gage.

1.4 SUBMITTALS

4.A. Submit under provisions of Section 01300.

4.B. Product Data: Manufacturer's data sheets on each product to be used, including: 4.B.1. Preparation instructions and recommendations. 4.B.2. Storage and handling requirements and recommendations. 4.B.3. Installation methods.

4.C. Shop Drawings:

4.D. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

4.E. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square representing actual product, color, and patterns.

1.5 QUALITY ASSURANCE

5.A. Manufacturer Qualifications: Minimum 5 year experience manufacturing similar products.

5.B. Installer Qualifications: Trained journeymen with a minimum of three years successful experience in the installation of resilient flooring.

5.C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship. 5.C.1. Finish areas designated by Architect. 5.C.2. Do not proceed with remaining work until workmanship is approved by Architect. 5.C.3. Refinish mock-up area as required to produce acceptable work. 09660-2 1.6 PRE-INSTALLATION MEETINGS

6.A. Convene minimum two weeks prior to starting work of this section.

1.7 DELIVERY, STORAGE, AND HANDLING

7.A. Deliver and store products in manufacturer's unopened packaging bearing the brand name and manufacturer's identification until ready for installation.

7.B. Handle materials to avoid damage.

1.8 PROJECT CONDITIONS

8.A. Temperature Requirements: Maintain materials and areas of work at temperatures between 70 degrees F and 90 degrees F for not less than 48 hours before, during and 48 hours after installation. Maintain a minimum temperature of 55 degrees F thereafter.

1.9 SEQUENCING

9.A. Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

1.10 WARRANTY

10.A. Madera Tile and Plank Flooring: 10.A.1. Manufacturer's 20 year limited residential warranty. 10.A.2. Manufacturer's 6 year light commercial warranty.

10.B. Madera Plus Tile and Plank Flooring: 10.B.1. Manufacturer's limited 15 year residential warranty 10.B.2. Manufacturer's 3 year light commercial warranty 10.B.3. Warranties are Owner transferrable during the term of any applicable warranty.

10.C. Pure Click 40 Tile and Plank Floating Flooring: 10.C.1. Manufacturer's limited lifetime year residential warranty 10.C.2. Manufacturer's 10 year commercial warranty on LVT products. 10.C.3. Warranties are owner transferrable during the term of any applicable warranty.

PART 2 PRODUCTS

09660-3 MANUFACTURERS

1.A. Acceptable Manufacturer: Syntec Industries, which is located at: 438 Lavender Dr.; Rome, GA 30165; Toll Free Tel: 800-526-8428; Tel: 706-235-1158; Fax: 706-235-1768; Email: request info ([email protected]); Web: syntecind.com

1.B. Substitutions: Not permitted.

1.C. Requests for substitutions will be considered in accordance with provisions of Section 01600.

2.2 LVT PLANK AND TILE FLOORING

2.A. LVT Performance: 2.A.1. Meets ASTM F1700 Standard. 2.A.2. FloorScore Certified. 2.A.3. Contains NO Phthalates. Manufactured from virgin materials. 2.A.4. ASTM D3389 Abrasion: 0.284g/5,000 cycles. 2.A.5. ASTM E-648 Fire Resistance: Class 1. 2.A.6. ASTM E-662 Smoke: < 450 smoke developed index. 2.A.7. ASTM 925 Stain & Chemical Resistance: Excellent. 2.A.8. ASTM 1514 Heat Stability: Passed. 2.A.9. ASTM 970 Static Load Limit: 1,450 psi. 2.A.10. ASTM F0247 Slip Resistance: Rated 0.62. 2.A.11. ASTM 2055 Size & Squareness: Passed. 2.A.12. IIC Acoustic Rating/STC Acoustic Rating: Minimum 35+IIC/ 27+STC. 2.A.13. IIC Acoustic Rating/STC Acoustic Rating with Underlayment: Minimum 90+IIC/ 77+STC.

2.B. Product: Madera Tile as manufactured by Syntec Industries, 2.B.1. Thickness: 2.0 mm (5/64 inch). 2.B.2. Wear Layer: 8 mil. (0.2 mm) Urethane finish. 2.B.3. Corsica 18x18 inches (457 x 457 mm). 2.B.4. Bronze 18x18 inches (457 x 457 mm). 2.B.5. Opal 12x24 inches (305 x 610 mm). 2.B.6. Pewter 12x24 inches (305 x 610 mm).

2.C. Product: Madera Wood as manufactured by Syntec Industries, 2.C.1. 09660-4 Thickness: 2.0 mm (5/64 inch). 2.C.2. Wear Layer: 8 mil. (0.2 mm) Urethane finish. 2.C.3. Gunstock Oak 6x36 inches (152 x 914 mm). 2.C.4. Forest Gold 6x36 inches (152 x 914 mm). 2.C.5. Cinnamon Oak 6x36 inches (152 x 914 mm). 2.C.6. Espresso Walnut 6x36 inches (152 x 914 mm). 2.C.7. Latte 6x36 inches (152 x 914 mm). 2.C.8. Mocha 6x36 inches (152 x 914 mm). 2.C.9. Driftwood 7x48 (178 x 1219 mm). 2.C.10. Coffee 7x48 (178 x 1219 mm). 2.C.11. Rome 7x48 (178 x 1219 mm). 2.C.12. Venice 7x48 (178 x 1219 mm).

2.D. Product: Madera Plus as manufactured by Syntec Industries, 2.D.1. Thickness: 2.5 mm (3/32 inch). 2.D.2. Wear Layer: 12 mil. (0.3 mm) Urethane finish. 2.D.3. Pecan 6x48 inches (152 x 1219 mm). 2.D.4. Latte 6x48 inches (152 x 1219 mm). 2.D.5. Mocha 6x48 inches (152 x 1219 mm). 2.D.6. Gunstock 6x48 inches (152 x 1219 mm). 2.D.7. Espresso 6x48 inches (152 x 1219 mm). 2.D.8. Forest Gold 6x48 inches (152 x 1219 mm).

2.E. Product: Madera Click as manufactured by Syntec Industries, 2.E.1. Thickness: 3.2 mm (1/8 inch). 2.E.2. Wear Layer: 8 mil (0.2 mm). Urethane finish. 2.E.3. Gunstock Oak 6x36 inches (152 x 914 mm). 2.E.4. Forest Gold 6x36 inches (152 x 914 mm). 2.E.5. Cinnamon Oak 6x36 inches (152 x 914 mm). 2.E.6. Expresso Walnut 6x36 inches (152 x 914 mm). 2.E.7. Latte 6x36 inches (152 x 914 mm). 2.E.8. Mocha 6x36 inches (152 x 914 mm).

09660-5 2.F. Product: Madera Professional as manufactured by Syntec Industries, 2.F.1. Thickness: 3.0 mm (1/8 inch). 2.F.2. Wear Layer: 20 mil (0.5 mm). Urethane finish. 2.F.3. American Cherry 6x36 inches (152 x 914 mm). 2.F.4. English Maple 6x36 inches (152 x 914 mm). 2.F.5. Brazilian Walnut 6x36 inches (152 x 914 mm). 2.F.6. Warm Ash 6x36 inches (152 x 914 mm). 2.F.7. Rustic Amber 6x36 inches (152 x 914 mm). 2.F.8. Saddle Oak 6x36 inches (152 x 914 mm).

2.3 LVT FLOATING FLOORING

3.A. Product: Pure Click 40 Floating LVT as manufactured by Syntec Industries: 3.A.1. Color: Selected from standard Syntec Pure Click 40 LVT colors. 3.A.2. Technical Properties: 3.A.2.a. 5.0 mm (13/64 inch) overall, 16 mil (0.4 mm) wear layer. 3.A.2.b. Product shall be manufactured from 100% virgin material containing no post- consumer recycled content. Product shall contain no plasticizers that include Phthalate compounds. 3.A.2.c. Plank layers shall include no less than two protective Polyurethane lacquer layers over wear layer. Additional layers shall consist of an acoustic vinyl decor layer over fiberglass backed with a Rigid Composite Board (RCB) containing DreamClick locking elements. 3.A.2.d. Planks shall be of composition to provide a waterproof shield. 3.A.2.e. Wood Planks are 8.03 inches (1,326 mm) x 52.2 inches (204 mm). 3.A.3. Technical Specifications: 3.A.3.a. ASTM D2047 slip resistance standards. 3.A.3.b. ASTM E648 fire resistance standards. 3.A.3.c. ASTM E662 smoke density standards. 3.A.3.d. ASTM F137 standards for flexibility. 3.A.3.e. ASTM F925 stain and chemical resistance standards. 3.A.3.f. ASTM F970 modified static load limit standards. 3.A.3.g. ASTM F1514 heat stability standards. 3.A.3.h. ASTM F1515 light stability standards. 3.A.3.i. 09660-6 ASTM F1914 immediate and residual indentation standards. 3.A.3.j. ASTM F2055/F2421 size and squareness standards. 3.A.3.k. ASTM F2199 dimensional stability standards. 3.A.4. Acoustic Properties: LVT Plank shall meet the following ratings without underlayment. Impact Sound Transmission: minimal IIC 62 rating (10dB); Sound Transmission loss: minimal STC 63 rating; Reflected Walking Sound: minimal STC 63 rating (9.2 sone).

3.B. Product: Pure Click 55 Floating LVT as manufactured by Syntec Industries: 3.B.1. Color: Selected from standard Syntec Pure Click 55 LVT colors. 3.B.2. Technical Properties: 3.B.2.a. 5.0 mm (13/64 inch) overall, 22 mil (0.56 mm) wear layer. 3.B.2.b. Product shall be manufactured from 100% virgin material containing no post- consumer recycled content. Product shall contain no plasticizers that include Phthalate compounds. 3.B.2.c. Plank layers shall include no less than two protective Polyurethane lacquer layers over wear layer. Additional layers shall consist of an acoustic vinyl decor layer over fiberglass backed with a Rigid Composite Board (RCB) containing DreamClick locking elements. 3.B.2.d. Planks shall be of composition to provide a waterproof shield. 3.B.2.e. Wood Planks are 8.03 inches (1,326 mm) x 52.2 inches (204 mm). 3.B.3. Technical Specifications: 3.B.3.a. ASTM F137 standards for flexibility 3.B.3.b. ASTM F925 stain and chemical resistance standards 3.B.3.c. ASTM F1514 heat stability standards 3.B.3.d. ASTM F1515 light stability standards 3.B.3.e. ASTM F1914 immediate and residual indentation standards 3.B.3.f. ASTM F2055/F2421 size and squareness standards 3.B.3.g. ASTM F2199 dimensional stability standards. 3.B.3.h. ASTM D2047 slip resistance standards 3.B.3.i. ASTM E648 fire resistance standards 3.B.3.j. ASTM E662 smoke density standards 3.B.3.k. ASTM F970 modified static load limit standards. 3.B.4. Acoustic Properties: LVT Plank shall meet the following ratings without underlayment. Impact Sound Transmission: minimal IIC 62 rating (10dB); Sound Transmission loss: minimal STC 63 rating; Reflected Walking Sound: minimal STC 63 rating (9.2 sone).

3.C. Product: Dream Click Pro - Revolutionary Click System as manufactured by Syntec Industries: 09660-7 3.C.1. Size Available: 6 inches x 36 inches (152 mm x 914 mm). 3.C.2. Residential Wear Warranty: Lifetime. 3.C.3. Commercial Wear Warranty: 10 Years. 3.C.4. Total Thickness: 13/64 inch (5.3 mm). 3.C.5. Urethane Wear Layer .55 mm 22 mils.

2.4 RESILIENT FLOORING

4.A. Product: Beauflor Luxury Resilient Flooring as manufactured by Syntec Industries: 4.A.1. Products shall be Phthalate Free, 100% Virgin materials and meet or exceed FHA requirements. 4.A.2. Engineered Composite shall provide embossment/texture to hide subfloor irregularities. 4.A.3. Ultra Grip: Enhanced with ceramic particles to improve slip resistance, while adding to dirt and stain resistance. 4.A.4. Pure Click and Dream Click products look and feel like real wood. The unique click system on all four sides provides for quick and easy installation.

4.B. Product: Metro - Engineered Composite Wear Surface: 4.B.1. Carrier: Woven Fiberglass. 4.B.2. Backing: Fiberglass Scrim with Foam. 4.B.3. Widths: 12 feet (3658 mm). 4.B.4. Wear Warranty: 5 Years Urethane Wear Layer. 4.B.5. Total Thickness: 55 mil with 10 mil (1.4 mm with 0.25 mm) Wear Layer.

4.C. Product: Alpha - Engineered Composite Wear Surface: 4.C.1. Carrier: Woven Fiberglass. 4.C.2. Backing: Fiberglass Scrim with Foam. 4.C.3. Widths Available: 13 feet-2 inches (4013 mm). 4.C.4. Wear Warranty: 5 Years Urethane Wear Layer. 4.C.5. Total Thickness: 80 mil with 10 mil (2.0 mm with 0.25 mm) Wear Layer.

4.D. Product: Gamma - Engineered Composite Wear Surface: 4.D.1. Carrier: Woven Fiberglass. 4.D.2. Backing: Fiberglass Scrim with Foam. 4.D.3. Widths Available: 13 feet-2 inches (4013 mm).

09660-8 4.D.4. Wear Warranty: 5 Years Urethane Wear Layer. 4.D.5. Total Thickness: 110 mil with 10 mil (2.8 mm with 0.25 mm) Wear Layer.

4.E. Product: Omega - Engineered Composite Wear Surface: 4.E.1. Carrier: Woven Fiberglass. 4.E.2. Backing: Fiberglass Scrim with Foam. 4.E.3. Widths Available: 13 feet-2 inches (4013 mm). 4.E.4. Wear Warranty: 7 Years Urethane Wear Layer. 4.E.5. Total Thickness: 140 mil with 10 mil (3.6 mm with 0.25 mm) Wear Layer.

2.5 ACCESSORIES

5.A. Adhesive: Product to be adhered to surface and proper preparation using Syntec SCA-700 Pressure Sensitive Adhesive with vertical release properties or approved equal.

5.B. Acoustical Underlayment: Silencer LVTas manufactured by Syntec Industries shall be made with high-density polyurethane foam using rapidly renewable resources (soybean polyols and vegetable oils). 5.B.1. Suitable for floating, glue down, LVT and vinyl plank flooring. 5.B.2. Physical Properties: 5.B.2.a. Thickness: 060 inch (1.5 mm). 5.B.2.b. Density: 30 LBS (13.6 Kg). 5.B.2.c. Weight: 2.65 oz. / sq. ft. (750 gram/sq. m). 5.B.2.d. Antimicrobial Treatment: ULTRA-FRESH. 5.B.2.e. Thermal Resistance: R-Value .17. 5.B.2.f. Compression Resistance ASTM D3676: 41.51 psi. 5.B.2.g. Compression Set ASTM D3574: 4 %. 5.B.2.h. Flammability Rating: Passes Federal Flammability Standards DOC-FF-1-70. 5.B.2.i. Smoke Density: Passes, 110 max. 5.B.2.j. Product Emissions: Exceeds VOC emissions requirements, environmentally friendly.

PART 3 EXECUTION

3.1 EXAMINATION

1.A. Do not begin installation until substrates have been properly prepared. 09660-9 1.B. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

2.A. Clean surfaces thoroughly prior to installation.

2.B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

3.A. Install in accordance with manufacturer's instructions, approved submittals, and in proper relationship with adjacent materials.

3.4 PROTECTION

4.A. Protect installed products until completion of project.

4.B. Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION

09660-10