Installing CWS/CMS Releases On Your PC – A Guide For End Users

CWS/CMS Application Support Installing CWS/CMS Releases on Your PC – A Guide for End Users Note: The install of this release must occur via the office network, as opposed to a dialed-in connection. Installation is largely automatic. The install should take approximately 5 to 10 minutes, depending on the speed of the workstation. The following steps will guide you through the process. User-required input is indicated in bold. To start the upgrade, double- click on the CWSCMS Application icon.

When you see the [Rule 09169] message box while your workstation is connected via the office network, respond by clicking on the Yes button. However, if you are using a dialed-in laptop, respond by clicking on the No button. Connect your laptop to the office network, and restart these instructions from the beginning.

A status bar displays the progress of the install program.

After the installation process is complete the dialog box at right appears. Click Finish.

You will be prompted to restart your system. Click Yes to confirm.

To verify that you have installed the new release code, start the CWS/CMS application. Click on the Help dropdown and select About... to confirm the release level.

11/9/2017 Page 1 of 1