<p>CWS/CMS Application Support Installing CWS/CMS Releases on Your PC – A Guide for End Users Note: The install of this release must occur via the office network, as opposed to a dialed-in connection. Installation is largely automatic. The install should take approximately 5 to 10 minutes, depending on the speed of the workstation. The following steps will guide you through the process. User-required input is indicated in bold. To start the upgrade, double- click on the CWSCMS Application icon.</p><p>When you see the [Rule 09169] message box while your workstation is connected via the office network, respond by clicking on the Yes button. However, if you are using a dialed-in laptop, respond by clicking on the No button. Connect your laptop to the office network, and restart these instructions from the beginning.</p><p>A status bar displays the progress of the install program.</p><p>After the installation process is complete the dialog box at right appears. Click Finish.</p><p>You will be prompted to restart your system. Click Yes to confirm.</p><p>To verify that you have installed the new release code, start the CWS/CMS application. Click on the Help dropdown and select About... to confirm the release level.</p><p>11/9/2017 Page 1 of 1</p>