Hamradio Special Print:FT1000MP-Supercontrol V.2.0CAT Software for the YAESU FT-1000MP

HAMRadio special print: FT1000MP-SuperControl® V.2.0

CAT software for the YAESU™ FT-1000MP® amateur radio transceiver series ( Including FT-1000MP Mark-V® and FT-1000MP Mark-V Field® ) FT1000MP-SuperControl® is a CAT control software especifically developed for the YAESU™ FT-1000MP® transceiver series. Because of this fact, it was possible to use all the specific commands and behaviour of this unique transceiver. So we were able to produce a software, which is unique in the CAT control software market. Functions of the transceiver were improved and were equipped with tremendous additional features. The design and the overall view have been built for easy and fast control possibilities. All the important commands are visible at the same time. Here is a general overview with some of the existing features:

Full transceiver control via buttons Programmable calculated target Wave recording of QSOs or other in the software. Frequency, mode and frequencies on two additional real time important signals. FT1000MP-SuperCon- other important information will be software VFO-display’s, for the use with trol® has the possibility to record selectable indicated in the software. up to four optional transverter-devices. events. For this feature, a standard audio- The software is capable to administrate device in the computer is necessary. The Full software control of the clarifier. up to four transverter-devices (for each recorded audio data can be saved While using the clarifier you can see antenna-jack). Of course the final automatically to a special folder to the hard the offset value and the final clarifier transverter frequencies can be used for drive (HDD) and can be replayed at any frequency in an additional VFO. Doppler shift calculation in Satellite- time. Control is faster than tuning at the rig. mode.

Open memory database with an Memory Scanner - Scanning of single Satellite mode & DDE-interface (Dynamic unlimited amount of possible memory banks, there is no need to scan Data Exchange) to satellite-tracking memories in an overall view. The all memory banks at the same time. Your programs (NOVA®, SatScape etc.) for memory banks of all amateur radio FT-1000MP transceiver has only 100 Doppler-correction in SAT- mode. The bands are visible and useable with internal memories, which must be Doppler-corrected frequency can be send ease at the same time. Several scanned all at once. If you’ve saved to the transceiver, so no manual tuning is additional memory banks are frequencies out of different bands and if needed anymore, when working satellites. available. Also memory banks with you want to scan these memories, you‘ll RX- and TX-VFO will be continuously the possibility to save offset CTCSS hear a rapid clicking of relay-type- updated with Doppler-corrected data. Of tone, antenna state and AZ-EL data devices in the transceiver. It is not course, possible calculated transverter are available. The AZ-EL data can be proved, but we’re sure, that continuous frequencies will be taken as source for the used to drive EasyComm-compatible long time period scanning will shorten calculation of the Doppler shift. hardware like rotators and much the life of these relays type devices. This more, or can be used to drive the part has a skip function for memories not *coming soon ARS rotator interface from EA4TX. to be scanned, but needed to stay in memory bank.

Voice announcements of frequency, Original like copy of the meter bars (s- Clone data memory-management mode and other important functions. meter, power-meter, alc-meter, etc.). for the internal memories of the FT- Additional digital s-meter readings. 1000MP® transceiver. FT1000MP- SuperControl® is able to read, edit, archive and send back clone files to the Voice machine (voice keyer) for DTMF tone encoder and decoder. transceiver. It’s easy to set up different contests or normal operation. Dual tone encoder / generator. clone files and copy them to your hard drive. If you want to use special setups in Automatic 10 minute station id (up Support for up to eight different serial the transceiver, simply send the wanted to four ID’s or call signs can be ports. These ports are to be used when clone file to the rig. recorded and used at any time). converting USB ports to serial ports.

Visual band scope with great *REAL* TCP-IP remote control in local Internet based telnet DX-cluster function graphics, different scan-steps and area networks (LAN) or also via the shows the latest DX-spots in the VFO- various possibilities. It is possible to internet (WAN). Password security, Log! display of the software. scan VFO1 while listening to VFO2, *coming soon and if this is not enough, you can “IN- Scan-QSY” by clicking with your Support for the ARS- and EasyComm Full featured VFO scanner with software mouse into the scanned graph, while interface to drive compatible optional based quick memory bank - function QMB). the visual scop is still scanning the hardware like rotor interfaces, etc. It’s possible to set up different scan ranges. bandwith beneath your working QRG.

Logbook-function. Skedbook-function. AF Spectrum scope (Audio frequency).

Configurable home channels for The local- and the UTC-time and date Testing environment for undocumented each amateur radio band. display can be configured for any CAT-commands. country.