SWS Hardware Standards

SWS – Hardware Standards

Standards Watch Service

 Are you using the latest versions of standards to ensure your work meets up to the minute requirements?

 How can you assure your clients that you are working with up to date standards and keep ahead of your competitors?

 How can you keep track of the changes to key standards and demonstrate document control?

The Standards Watch Service is available to CAB members to simplify the task of keeping your standards library up to date.

As a member of CAB using the Standards Watch Service you will be able to check that you are using the most recent versions of the British, European and International standards, allowing you to confirm compliance with confidence. There is no additional charge for this service – it’s all part of your CAB membership package.

Simply tell us which standards are important to you and we will notify you on a regular basis when any changes or updates to these standards are published1. The service is confidential and your details will not be shared with any third parties.

To make this task even easier we have included some suggestions in the list on the following pages as a starter. Mark all the standards that you would like us to watch on your behalf and add the details for as many additional standards as you need at the end of the table.

Return your completed form to us, either electronically or by fax and we will start your Standards Watch Service.

Thank you.

1 Please note that, for the BSI technical committees that CAB is a member of (i.e. B/520, B/538 and B/558), we will continue to alert CAB members of any relevant standards that are being amended or out for public comment via the pages of Insight.

Council for Aluminium in Building, Bank House, Bond’s Mill, Stonehouse, Gloucestershire GL10 3RF May 2016 Tel: 01453 828851 Fax: 01453 828861 Email: [email protected] Web: www.c-a-b.org.uk Page 1 of 5 SWS – Hardware Standards

Standards watch list – Hardware standards Please right-click each box in the left hand column to add that standard to your watch list.

Check Number Part Date Title ☐ BS 3621 2007 Thief resistance lock assembly - Key egress ☐ BS 6462 1985 Specification for mechanical performance of peg- type casement stays and face fixed wedge action fasteners ☐ BS 8300 2009 Design of buildings and their approaches to meet the needs of disabled people - Code of practice ☐ BS 8424 2004 Pull handles - Requirements and test methods ☐ BS 8607 2014 Mechanically operated push-button locksets - Requirements and test methods ☐ BS 8621 2007 Thief resistance lock assembly - Keyless egress ☐ BS 10621 2007 Thief resistance dual-mode lock assembly ☐ BS EN 179 2008 Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods ☐ BS EN 1125 2008 Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods ☐ BS EN 1154 1997 Controlled door closing devices - Requirements and test methods ☐ BS EN 1155 1997 Electrically powered hold-open devices for swing doors - Requirements and test methods ☐ BS EN 1158 1997 Door coordinator devices - Requirements and test methods ☐ BS EN 1303 2015 Cylinders for locks - Requirements and test methods ☐ BS EN 1527 2013 Hardware for sliding doors and folding doors - Requirements and test method ☐ BS EN 1670 2007 Corrosion resistance - Requirements and test methods ☐ BS EN 1906 2012 Lever handles and knob furniture - Requirements and test methods ☐ BS EN 1935 2002 Single-axis hinges - Requirements and test methods ☐ BS EN 12051 2002 Door and window bolts - Requirements and test methods ☐ BS EN 12209 2003 Mechanically operated locks, latches and locking plates - Requirements and test methods ☐ BS EN 12320 2012 Padlocks and padlock fittings - Requirements and test methods ☐ BS EN 12365 1 2003 Gasket and weatherstripping for doors, windows, shutters and curtain walling - Performance requirements and classification ☐ BS EN 12365 2 2003 Gasket and weatherstripping for doors, windows, shutters and curtain walling - Linear compression force test methods

☐ BS EN 12365 3 2003 Gasket and weatherstripping for doors, windows, shutters and curtain walling - Deflection recovery test methods ☐ BS EN 12365 4 2003 Gasket and weatherstripping for doors, windows, shutters and curtain walling - Recovery after accelerated ageing test method ☐ BS EN 12978 2003 Safety devices for power operated doors and gates - Requirements and test methods ☐ BS EN 13126 1 2011 Hardware for windows and door height windows - Requirements and test methods - Requirements common to all types of hardware ☐ BS EN 13126 2 2011 Requirements and test methods for windows and door height windows - Window fastener handles ☐ BS EN 13126 3 2011 Hardware for windows and door height windows - Requirements and test methods - Handles, primarily for tilt & turn, tilt-first and turn-only hardware ☐ BS EN 13126 4 2008 Requirements and test methods for windows and door height windows - Espagnolettes ☐ BS EN 13126 5 2011 Hardware for windows and door height windows - Requirements and test methods - Devices that restrict the opening of windows and door height windows ☐ BS EN 13126 6 2008 Requirements and test methods for windows and door height windows - Variable geometry stay hinges (with or without a friction stay) ☐ BS EN 13126 7 2007 Requirements and test methods for windows and door height windows. Finger catches ☐ BS EN 13126 8 2006 Requirements and test methods for windows and doors height windows. Tilt & turn, tilt-first and turn-only hardware ☐ BS EN 13126 9 2013 Requirements and test methods for windows and door height windows - Hardware for horizontal and vertical pivot windows ☐ BS EN 13126 10 2008 Requirements and test methods for windows and door height windows - Arm-balancing systems ☐ BS EN 13126 11 2008 Requirements and test methods for windows and door height windows - Top hung projecting reversible hardware ☐ BS EN 13126 12 2008 Requirements and test methods for windows and door height windows - Side hung projecting reversible hardware ☐ BS EN 13126 13 2012 Hardware for windows and balcony doors - Requirements and test methods - Sash balances ☐ BS EN 13126 14 2012 Hardware for windows and balcony doors - Requirements and test methods - Sash fasteners ☐ BS EN 13126 15 2008 Requirements and test methods for windows and door height windows - Rollers for horizontal sliding and sliding folding windows and doors

☐ BS EN 13126 16 2008 Requirements and test methods for windows and door height windows - Hardware for lift & slide windows and doors ☐ BS EN 13126 17 2008 Requirements and test methods for windows and door height windows - Hardware for tilt & slide windows and doors ☐ BS EN 13126 19 2011 Requirements and test methods for windows and door height windows - Sliding closing devices ☐ BS EN 13637 2015 Electrically controlled exit systems for use on escape routes - Requirements and test methods ☐ BS EN 14637 2007 Electrically controlled hold-open systems for fire / smoke door assemnlies - Requirements, test methods, application and maintenance ☐ BS EN 15684 2012 Mechatronic cylinders - Requirements and test methods ☐ BS EN 16035 2012 Hardware Performance Sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and / or smoke control doorsets and / or openable windows ☐ PAS 8621 2011 Multi locking assemblies - Keyless egress - Performance requirements and test methods ☐ PD CEN/TR 15894 2009 Door fittings for use by children, elderly and disabled people in domestic and public buildings - A guide for specifiers Please add any other standards you would like to include in your watch list in the following rows (we can track BS, EN and ISO standards): Check Number Part Date Titleǂ ☐ ☐ ☐ ☐ ☐ ☐ ☐ ☐ ǂ The number and, if applicable, part(s) for any additional standards should be sufficient and you do not need to provide the title. Please continue on a separate sheet if necessary.

Please note that we are not currently able to purchase standards on behalf of members or offer any discount on the purchase price.

You can make changes or additions to the list at any time. Just let us know. We will send your complete watch list as a reminder to the contact given below on an annual basis.

Please fill in the following details and return your completed form to [email protected] or fax it to: 01453 828861.

Your details

Your organisation name: Contact name: Contact email*: *This is the email address that we will use to notify you of any updates or changes to the standards in your standards watch list and should any changes be made to this service for CAB members.

Council for Aluminium in Building, Bank House, Bond’s Mill, Stonehouse, Gloucestershire GL10 3RF May 2016 Tel: 01453 828851 Fax: 01453 828861 Email: [email protected] Web: www.c-a-b.org.uk Page 5 of 5