Technical Parameters

Multi-Purpose Security Tester(TVI+IPC+Analog)

This device is designed for video surveillance installation and maintenance. It can beapplied to analog SD video, analog HD video, HD IP CCTV systems, RS485 PTZ control testing, IP camera testing, Ethernet testing, TDR cable testing*, video screen shots, video recording, playback, and other functions, and combined with analogcamera testing. This device is powerful, easy to carry, very suitablefor video security engineering installation and the maintenance of front-end camera equipment. It greatly improves engineering and installation efficiency, reducing the cost of maintenance.

Features:

1.Support IP/ analog/Analog TVI Cameras

2. Dual LED torch light

3.Highly compatible with ONVIF protocols

4. Rubber protection layer

5.On-screen operation tips

6. Flip keyboard input

7. POE power supply, PD power accept, and 12V/2A power output

8.4.0 inch IPS Display with 800*480 resolution and 16.7M Colors

9. Dual 1000M network ports, supports packet loss detection, data flow monitor, etc.

10.Replaceable lithium-ion polymer battery, battery life of 10 hours

11. Ergonomic, portable design and single-handed operation

12.Dual LED torch light Step-by-step testing guide allows you to locate faults quickly Technical Parameters: Model HS-CT04T IPC Test IPC Protocol ONVIF, RTSP, RTP Ethernet test 10M/100M/1G Ethernet link； Ethernet loop detection； DHCP client and server ； Ethernet traffic flow monitor* Data link quality monitor* IP Test DHCP/Manually Setting the IP IPC Test Discover devices，real-time video，camera configuration，PTZ test，inter- subnet discovery of ONVIF device IPC Image test Full-screen preview,zoom in the preview(Fit screen,1x，2x,4x)， screen shot and video recording * (Upgrade online)（Meta data ） Connector Dual-port RJ45 Ethernet 1Gbps，bridge mode supported； POE Test PD test Accept power from PSE ,802.3at; Supply voltage monitor PSE test Provide power for connected PD.802.3at; 25.5W max, PD actual power measurement Analog Video Test Video Format NTSC/PAL Auto-adaptation Video signal 1Vpp Display adjustment Video display brightness,contrast,color saturation is adjustable Video input/output Video IN BNC Input，Video OUT BNC Output Video digital zoom Supports“fit screen”“1X”“2X”“4X” four multiples; screen shot , recording back（h.264) Video signal generator Send PAL/NTSC format a variety of graphic video test signal HDTVI & Analog Test SD signal Format NTSC, PAL HD video signal HDTVI* Resolution D1, 720P, 1080P Signal Level 1Vpp Camera Test Real time video, PTZ control, audio test, full screen preview and 8x digital zoom, snapshot, record video(H.264) HDTVI OSD Camera configuration Detection TDR detection* 0~150m net cable detection, resolution 1m POE test PD/PSD Test Network Analyze Sniff, list subnet, ping Analog Video Generator Generate PAL/ NTSC video signal of various test pattern Record Playback Support local playback 12V Power Output Power output 12V/2A output interface： Circular diameter 4mm，internal needle 1.6mm Audio Test Audio test Stereo audio input Model485 PTZ Control Recommended: Test Communication interface RS485 ModelCommunication No. protocol Pelco-D/P、SamsungFunctions、Panasonic、Lilin、Yaan more than 30Remark protocols CT04S Baud rateONvif Test(Video150， Display300， &600 PTZ， Control);1200，2400 Analog，4800 camera，9600 test;，19200bps Protocol code capture ReceiveNetwork and displayanalysis; RS485 POE Test;data sent from controlling device CT04CLED flashlight ONvif Test(Video Display & PTZ Control); Analog camera test; Forward LED Network analysis;Two POE LED Test; flashlights TDR Test; CVI camera test; CT04HPower Supply ONvif Test(Video Display & PTZ Control); Analog camera test; Network analysis; POE Test; TDR Test; AHD camera test; Charger POE power injector CT04T ONvif Test(VideoOutput Display 48V/15W & PTZ， Control);Input AC100~230V Analog camera 50~60Hz test; Network analysis; POE Test; TDR Test; TVI camera test; Battery Replaceable 7.4V 22.2Wh lithium polymer battery ,Working time about 10 hours Charging POE charging ，Power 10Wmax.Charging time 3 to 4 hours Power save Auto switch between states of working, standby and shutdown.Battery level is displayed in real time System settings Display Screen 4.0-inch TFT 800*RGB*480(WVGA) resolution ， 16.7M color ， backlight brightness adjustable Operation Power button ， the main control keyboard 12 keys,45 keys QWERTY swing