Vor-Projektierungs - Fragebogen

Product Questionnaire : Reply To: VTA GmbH Post Office Box 37570 Rock Hill, SC 29732 e-mail: [email protected] Fax: 803-980-2881 The answers to this Questionnaire will enable VTA to help provide estimates of: feasibility of process by vacuum distillation, preliminary process design and equipment sizing, budget pricing for investment analysis. Project/Product Designation:______Date:______

Name:______Responsibility:______Phone:______Email:______Fax:______Alternate Contact:______Responsibility______Phone:______Email:______Fax:______Company:______Address: ______

1) General Data: 1.1) Preferred Scope of Supply:  components only  complete skid mounted system 1.2) Is vacuum required for the distillation?  no  yes 1.3) Does the product contain solids?  no  yes, particle size: ………… µm 1.4) Maximum allowable temperature over time of the product:______°C for ____minutes

2) Information of the planned unit: 2.1) Feed quantity: ______kg/hr Feed Temperature:______°C 2.2) Time of Operation:______hr/day ______day/week ______hr/year 2.3) Acceptable process wetted materials (e.g. 316L):______2.4) Required material for gaskets (e.g. Viton):______2.5) Is explosion proof design required?  yes no classification:______2.6) Available space at site: length:______width:______height:______2.7) Describe other requirements (e.g. cGMP, CIP):______2.8) Which components should be offered for the requested unit? Generally a quotation for a complete unit contains the following components:

- Evaporator  - Feed and discharge pumps  - Vacuum pumps  - Piping and buffer vessels  - Required heat exchangers  - Measuring instruments  - Control Panel  - Cooling and heating units 

Additional Options: -PLC control  SCADA  Manual  -Others:______

3) Available utilities on-site:  Steam______PSIG  Hot Oil______°C  Cooling water_____°C  Brine______°C  Hot water (...... °C/⁰F)  Electrical Supply: Voltage______V Frequency: ______Hz Phase: ______ Instrument air: ______psig

4) What is the present status of the project and when will it be realized Unit of Measure Feed Material Distillate 1 Distillate 2 (for the Residue design of a double stage unit)

Composition

Name of Components

B mass %

Goals of distillation regarding Quality and other Specifications

Others

Boiling Point °C, at 760 torr

°C, at ...... torr melting point °C viscosity at reference temperature m Pa∙s (cP), at ….°C

Other data concerning Viscosity  pasty  pasty  pasty  pasty

 viscous, at ...... °C  viscous, at ...... °C  viscous, at ...... °C  viscous, at ...... °C

 liquid  liquid  liquid  liquid molecular weight g/mol specific heat kJ/kg∙K heat of evaporation kJ/kg