Template for Paper / Poster Preparation

Oct 18th - 20th 2017, Brno, Czech Republic, EU

TEMPLATE FOR PAPER / POSTER PREPARATION

Obligatory division of the paper:

Abstract Keywords Introduction Main text (containing the methodological bases, experimental part, results and its discussion), Conclusion (Acknowledgements) References

Text editor: MS WORD version 97 and newer Font: size 10 pt, Arial Spacing: 1.2 Margin of the page: 20 mm from all sides

PLEASE USE THE PREDEFINED STYLES OF THIS DOCUMENT.

TITLE OF PAPER (11 pt, bold, center, gaps 12 before, 6 after, spacing 1.2)

Authors (SURNAME Name) (11 pt, center, gaps 12 and 12, spacing 1.2) e.g. NOVÁK Jan1, ALTMAN John2

Name and address of the institution, e-mail address (10 pt, italics, center, gaps 6 and 0, spacing 1.2) e.g. 1VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU 2University of Strathclyde, Faculty of Physics, Glasgow, Scotland, United Kingdom, EU

Abstract (title - 10 pt, bold, gaps 24 and 0) Abstracts (text - 10 pt, gaps 6 and 0) must have extent to 250 words. Keywords: (title - 10 pt, bold, gaps 6 and 0, text - max 5 keywords, 10 pt, gaps 6 and 0)

1. CHAPTER TITLES (10 pt, bold, gaps 18 and 0) We recommend split the text of paper (gaps 6 and 0) into numbered chapters and subchapters, for example 1.1., 1.2. etc. Please use the specific header and footer in written paper. For sending your paper, use the conference registration system please. The range of papers is up to 6 pages incl. pictures and 20 MB. The paper must be sent in *.doc, *.docx or *.rtf format.

1.1. Subchapter title (10 pt, bold, gaps 12 and 0) Oct 18th - 20th 2017, Brno, Czech Republic, EU

2. FIGURES, EQUATIONS, TABLES It is recommended to put tables and pictures within the text. The name of the table (Table 1) write above the table to the left (10 pt, title - bold, text - real) and the name of the picture ( Figure 1) write under the picture to left or center (10 pt, title - bold, text - real). Please do not use abbreviations (Fig. 1 - wrong, Figure 1 - correctly; Tab. 1 - wrong, Table 1 - correctly). Next paragraph after the table or figure has gaps 12 and 0. It is possible to include the color pictures and graphs into the text, because the proceedings will be in the electronic form. Graphs must contain all of required particulars (description of axes, units, etc. - Figure 1 is an example). The pictures have to be original or quality scanned. We will not accept bad photocopy. Descriptions of the pictures should be clear and legible. The pictures and graphs must be a part of paper. If you have any questions, please write to the conference secretariat. The position of the figures (in the figure position “Tab”) should be selected as the "In the text".

Figure 1 Title of the figure (10 pt, gaps 6 and 12)

Table 1 Title of table (10 pt, gaps 12 and 2)

Text (9 pt, gaps 6 and 0, single spacing) Column Row

Equations must be created in Equation Editor and written in the separate   Q  n line on the left side for example: ˙  A exp sinh   p   RT  (1) We ask you to keep writing repeating units and captions by these examples: 700 MPa; 100 g; 900 °C; 1040 K; 0.5 % (fundamentally decimal point, not comma); 1.5 h; Oct 18th - 20th 2017, Brno, Czech Republic, EU

ld / h0 (space before and after slash)

-1 W = 2000 mm; ld / h0 > 3; v = 600 ms (mathematical dot in the middle row, insert not using the equation, but as a symbol); 52 x 10-5; W / (mK); it is also accepted W / mK; 20 °C to 80 °C; 180 °C; description of axes at the Figures: Surface temperature (°C)

3. CONCLUSION The paper must contain conclusion.

ACKNOWLEDGEMENTS The acknowledgements, please, write size 10 pt, italics, gaps 6 and 0, bold and center it.

REFERENCES The number of cited references can be written in square brackets placed immediately after the text and continuously. Do not start on a new page. References to the literature mark in by the Arabic numerals continuously in order as they appear in the text. The font size in the References is 9 pt, gaps 3 and 0, right align. Range of auto citations in references should be max. 20 % including co-authors. Range of citations on previous conference METAL should be max. 20 %. Examples are shown for: [1] - a book, [2] - article in a journal, [3] - paper in the proceedings: [1] COOK, C. J., KERSE, C. S. Merger control. 3rd ed. London: Sweet & Maxwell, 2000. 376 p. [2] VAN DER VET, P. E., MARS, N.J. Condocet querry engine. Journal of the American Society for information science, 1999, vol. 42, no. 6, pp. 485-492. [3] SMEJKAL, V. FEM modeling and experimental research of through-thickness strain distribution during hot plate rolling. In METAL 2014: 23rd International Conference on Metallurgy and Materials. Ostrava: TANGER, 2014, pp. 289-294.

INSTRUCTIONS FOR BULLETS AND NUMBERING

 10 pt, gaps 6 and 0; do not add space between paragraphs of the same style - only for bullets and numbering, not for regular text

 Recommended typographical symbol is Bullet point “•”

 Use only numeric numbering - 1., 1.1., 1.1.1., etc. (not text numbering A., B.…)

 Hanging indent is 1 cm

LIST OF ERRORS THAT AUTHORS MAKE OFTEN

 Scientific goal and contribution of the paper is not clearly defined in the introduction of the paper

 Absence of citations of the tables and figures in the text with relevant commentary

 Missing bibliographic references in the text

 Absence of the conclusion

 Lack of sufficient number of citations to the current foreign literature, especially journals Oct 18th - 20th 2017, Brno, Czech Republic, EU

 Wrong format of cited references