Smartid Custom Format Reader Ordering Guide

SmartID® MIFARE® and DESFire® Reader Custom Format Request Form Reader Part Numbers: 8030/8100 MIFARE® or DUAL MIFARE 8030/8100 DESFire® 8031/8101 MIFARE or DUAL MIFARE with Keypad 8031/8101 DESFire with Keypad

Description: These custom MIFARE or DESFire readers offer a complete selection of keys and card formats for adding to existing installations or facilitating companies to manage their own keys and formats. This worksheet will help you gather required information to process orders for these readers. Please specify the following A - Custom Format Number: B - New Custom MIFARE Format: Use MAD (Yes / No): Yes No

If Yes, AID (recommended):

If No, Sector:

Block where data is located:

Starting bit:

Number of bits to output: Block where data is located (2nd, DUAL Only)

Starting bit (2nd, DUAL Only) Number of bits to output (2nd, DUAL Only)

Custom Keys (Yes / No): Yes No C - New Custom DESFire Format: Specify APPLICATION (AID) or HID Global’s’ AID (default): File ID to store data or enter HID Global Default to use HID Global’s’ FILE ID:

File Size, default is 32 Bytes: File Type, default is 0X00 Standard Data File

Address in file where data is located:

Starting bit:

Number of bits to output:

Custom Keys (Yes / No) : Yes No Security Level: Plain communication Plain communication secured by DES/3DES MACing Fully DES/3DES enciphered communication Communication mode of the file is used

Clock-and- D - Output format: Data Number of digits: Number of Wiegand bits: Left Parity: Odd Even Calculation First Bit: Last Bit: Right Odd Even Parity: Calculation First Bit: Last Bit: Serial Number of Type Baud chars: (RS232/RS485/RS422): rate: E - User interface: Card reading beep (Yes / No): Yes No Keypad key press beep (Yes / No): Yes No LED, Left: Set LED constant green When combining green and red are Set LED green when card is read combined, the LED will set to yellow. Set LED green when key is stroked Set LED constant red Set LED red when card is read Set LED red when key is stroked LED, Right: Set LED constant green When green and red are combined, the Set LED green when card is read LED will set to yellow. Set LED green when key is stroked Set LED constant red Set LED red when card is read Set LED red when key is stroked Input pin 1 (When active to GND): Used for LED (Left/Right): Left Right LED off LED to Green LED to Red LED to Yellow Input pin 2 (When active to GND): Used for LED (Left/Right): Left Right LED off LED to Green LED to Red LED to Yellow Transfer all keys securely. Do not place keys in this form. All custom formats require time to develop and test. Required is a customer sign-off before fulfilling the first order. Once your key is encrypted using the HID Key Wrapper program, fill-in the following information: Wrapped Keys: Access Key for MIFARE Sector PICC Master Key

PICC Master Key Settings (Default shown) Number of keys - 4 (Default shown)

Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0

0 0 0 0 1 0 1 1 Bit 3 – Master Key settings are changeable if authenticated with PICC Master Key (ON) Bit 2 – Create Application / Delete Application is permitted only with PICC Master Key Authentication

(OFF) Bit 1 – GetApplicationIDs and GetKeySettings commands succeed independently of PICC Master Key (ON) Bit 0 – PICC Master Key Changeable (authentication with the current PICC master key required) (ON)

MAD/Application Master Access Key 0

Application Key Settings (Default shown) Number of keys - 4 (Default shown)

Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0

1 1 1 0 1 0 1 1 Bit 7 – Bit 4 – 0xE Authentication with changed key is necessary (same Key No) Bit 3 – Configuration settings are changeable if authenticated with Application Master Key (ON) Bit 2 – Create / Delete File is permitted only with Application Master Key Authentication (OFF) Bit 1 – GetFileIDs, GetFileSettings and GetKeySettings commands succeed independently (ON) Bit 0 – Application Master Key Changeable (authentication with current application master key required) (ON)

Application Access Key 1 Application Access Key 2 Application Access Key 3 BIO Application Master Key 0 BIO Application Access Key 3 Wrapping Password (Pass Phrase): DISTRIBUTED - PHONE ONLY Using the HID Key Wrapper program keeps your key secure during order processing. Internal Use: Format Number