N496 TC67-SC4-WG 6 Subsea Report 2011

ISO/TC 67/SC 4 Materials, equipment and offshore structures for petroleum and natural gas industries - Drilling and production equipment

SC 4 Secretariat: American Petroleum Institute, 1220 L Street NW, Washington, DC 20005 USA Tel: + 1 202 682 8000 Fax: + 1 202 962 4714

ISO/TC 67/SC 4 N496 2011-05-09 Report of ISO/TC 67/SC 4/WG 6 "Subsea equipment" (ISO/TC 67/SC 4/WG 6 N 204, 2011-03-18)

1. Convener and secretariat

Jens-Henrik Neuenkirchen Per Kristian Lesund Statoil, Stavanger, Norway Standards Norway Tel. +47 5199 0000 P.O.Box 242, NO-1326 Lysaker, Norway Mobile +47 .... Phone: +47 67 83 86 00 (direct: +47 67 83 86 47) E-Mail [email protected] Fax: +47 67 83 86 01 E-mail: [email protected]

2. Membership

Name Company Email Nilo Jorge Petrobras, Brazil [email protected] Per-Arne Nilsen Total, France [email protected] Substitute: Marc Perrot Total, France [email protected] Jean Phillippe Roques Total, France [email protected] Alberto Arcelloni ENI, Italy [email protected] Gianfederico Cifi ENI, Italy [email protected] Jose Eugenio Iturriaga Flores PEMEX, Mexico [email protected] Olav Inderberg FMC Kongsberg Subsea, Norway olav.inderberg @fks.fmcti.com Torolf Hæhre Shell, Norway [email protected] Alf Reidar Johansen OGP, Norway [email protected] Dilijan Mirzoev Gazprom, Russia [email protected] Peter Griffiths Shell, UK [email protected] Ron Dee Shell, USA [email protected] Brian Skeels FMC Technologies, USA [email protected]

3. Project leaders

ISO No ISO Standard title ISO Project leader 13628- Petroleum and natural gas industries – Design series and operation of subsea production systems – 13628-1 General requirements and recommendations André Maerli, Statoil, Norway ISO No ISO Standard title ISO Project leader Unbonded flexible pipe systems for subsea 13628-2 Krassimir Doynov, ExxonMobil, USA and marine applications 13628-3 Through flow line (TFL) systems Vacant 13628-4 Subsea wellhead and tree equipment Ross Frazer, ATP, USA 13628-5 Subsea control umbilicals Tom Williams, Shell, USA 13628-6 Subsea production control systems Roald Loug Hansen, Statoil, Norway Workover/completion riser systems Anthony Muff, FMC, Norway

13628-7 Intervention workover control systems Jan Frederik Carlsen, FMC, Norway (IWOCS) (to be included)

Remotely operated tools and interfaces on 13628-8 Eric Luzi, Statoil, Norway subsea production systems NOTE Combined with ISO 13628-9 Remotely operated tools (ROT) intervention Eric Luzi, Statoil, Norway 13628-9 NOTE Combined with ISO 13628-8. systems ISO 13628-9 is vacant. 13628-10 Specification for bonded flexible pipe Krassimir Doynov, ExxonMobil, USA Flexible pipe systems for subsea and marine 13628-11 Krassimir Doynov, ExxonMobil, USA riser applications 13628-12 Dynamic production risers Paul Stanton, Technip, USA Remotely operated tools and interfaces on Eric Luzi, Statoil, Norway 13628-13 NOTE See ISO 13628-8. subsea production systems ISO 13628-13 is vacant. High integrity pressure protection system 13628-14 Christopher Curran, BP, USA (HIPPS) 13628-15 Subsea structures and manifolds Charles White, DORIS Inc., USA Specification for flexible pipes ancillary 13628-16 Krassimir Doynov, ExxonMobil, USA equipment Recommended practice for flexible pipes 13628-17 Krassimir Doynov, ExxonMobil, USA ancillary equipment

4. Interested parties

Name Company Email Paolo Novelli Tenaris Dalmine, Italy [email protected]

5. Listing of ISO 13628 series related to API 17 series

See enclosure 1.

6. Areas of status, progress or concern

13628-1, General requirements and recommendations (Edition 3) The development of ISO 13628-1, edition 3, is in progress, but somewhat behind schedule. The project group met in January 2011 to discuss how to improve the progress. Result unknown.

13628-2, Unbonded flexible pipe systems for subsea and marine applications (Edition 3) A project group for development of edition 3 has been established. Status of work to be checked.

13628-3, Through flowline (TFL) systems ISO 13628-3:2000 was subjected for systematic review in 2010 and confirmed for another five years.

13628-4, Wellhead and tree equipment (Edition 2) The standard was published 2010-12-15.

2 13628-5, Subsea control umbilicals (Edition 2) Published 2009-12-15.

13628-6, Subsea production control systems (Edition 3) Final draft DIS for formating etc. is received from Jens-Henrik 2011-02-22.

13628-7, Workover/completion riser systems (Edition 2) It is expected that a draft CD (or DIS) will be completed after the summer of 2011 (see email 2011-02- 18).

13628-8, Remotely operated tools and interfaces on subsea production systems DIS 13628-8 is circulated for enquiry terminating 2011-04-11.

13628-9, Remotely Operated Tool (ROT) intervention systems See ISO 13628-13.

13628-10, Specification for bonded flexible pipe (Edition 1) The standard was subjected for systematic review in 2009 and confirmed for another five years.

13628-11, Flexible pipe systems for the subsea and marine riser applications (Edition 1) The standard was adopted by API in July 2008 (API 17B).

ISO 13628-11:2007 was subjected for systematic review in 2010 and confirmed for another five years.

13628-12, Dynamic production risers A completed WD was circulated for comments no later than 2010-12-08. DIS ready for ISO/CS was planned to be completed immediately after Christmas.

To follow the formal procedures for an ISO project the WG 6 secretariat has asked the project leader to send the final WD, prepared by the ISO 13628-12 project group, to ISO/TC 67/SC 4/WG 6 "Subsea equipment" ([email protected]) for review and further forwarding to ISO/TC 67/SC 4.

An extension request has been sent to ISO/CS. DIS no later than 2011-12-31. Awaiting approval.

13628-13, Remotely operated tools and interfaces on subsea production systems ISO 13628-13 is vacant.

13628-14, High integrity pressure protection system (HIPPS) The NWIP was approved in June 2010. Status of work is not known.

13628-15, Subsea structures and manifolds FDIS was uploaded onto the ISO system 2011-01-10.

Pending ISO final review and preparation before release under a FDIS ballot.

13628-16, Specification for flexible pipes ancillary equipment Kick-off addressing the DIS comments in January 2011 (see report from Krassimir Doynov 2011-01-14).

13628-17, Recommended practice for flexible pipes ancillary equipment Kick-off addressing the DIS comments in January 2011 (see report from Krassimir Doynov 2011-01-14).

7. Resource needs For the time being: none identified.

3 8. Anticipated New Work Items

API RP 17Q "Subsea qualification" has been of interest to WG 6 as basis for a joint ISO standard. Preliminary work for NWIP has been carried out by Lars Petter Sollie, Shell. It has, however, been concluded that there is no need for a "subsea qualification" part of ISO 13628 as the subject is satisfactorily covered by other ISO standards.

9. Past meetings

No. Date Location No. Date Location 1 1993-03-03 Oslo 21 1999-02-18 Houston 2 1993-05-26 Oslo 22 1999-04-21 The Hague 3 1993-06-21 New Orleans 23 1999-10-12 The Hague 4 1993-09-17 Oslo 24 2000-12-06 Houston 5 1994-08-09 Oslo 25 2001-06-27 Calgary 6 1995-03-22 Oslo 26 2002-02-07 Houston 7 1995-06-15/17 The Hague 27 2003-03-06 Houston 8 1995-09-26/27 Milan 28 2003-06-18 San Antonio 9 1995-12-13/14 Houston 29 2004-02-18 Houston 10 1996-03-27/28 Oslo 30 2004-06-16 Dallas 11 1996-06-25/26 Atlanta 31 2005-02-03 Houston 12 1996-09-18 Oslo 32 2005-06-29 Calgary 13 1997-01-13/14 Dallas 33 2006-03-03 Galveston 14 1997-04-23/24 The Hague 34 2007-02-07 Houston 15 1997-07-16 Denver 35 2007-06-27 San Francisco 16 1997-10-08 Celle 36 2008-06-25 Calgary 17 1998-02-03/04 Houston 37 2009-01-16 Houston 18 1998-04-22/23 The Hague 38 2009-06-24 Denver 19 1998-06-16 Dallas 39 2010-01-20 Houston 20 1998-09-22/23 The Hague 40 a 2010-04-20 Bergen 41 2010-06-30 Washington DC 42 2011-01-18 Houston

a Cancelled because of flight restrictions in Europe caused by volcanism.

10. Plans for future meetings

Next WG 6 meeting is planned as a joint meeting with API/SC 17 "Subsea" at the 2011 API Standards Summer Conference in San Francisco.

4 Summary plan and status for ISO 13628 Subsea production systems and related API 17-series standards ISO std ISO Std Title and basis API std current Plan/Comment 13628-1, General requirements and recommendations, API has adopted ISO 13628-1:2005 Voting on FDAmd 1 "Revised Clause 6" terminated 2010-06-01. NWIP edition 3 Ed.2 published November 2005. (identical) as RP 17A, 4th edition, approved. DIS planned 3Q 2010. PL: André Mærli, Statoil January 2006. 13628-2, Unbonded flexible pipe systems for subsea and API has adopted ISO 13628-2:2006 ISO 13628-2 based on latest addendum of API 17J. API adoption. JIP to develop Ed.2 marine applications, published July 2006. as RP 17J, 3rd edition, July 2008. next revision ongoing. 13628-3, Through flow line (TFL) systems, published API has adopted ISO 13628-3:2000 Systematic review in 2010. Confirmed? Ed.1 December 2000, based on API 17C, 1st edition. as RP 17C, 2nd edition, September 2002. 13628-4, Subsea wellhead and tree equipment, published API Spec 17D, 1st edition, October Ed.2 published 2010-12-15. Ed.1 June 1999, based on API 17D. 1992. Reaffirmed November 2003 w/updated API Spec 6A references. 13628-5, Subsea control umbilicals, published December API has adopted ISO 13628-5:2002 Ed.2 2009. (identical) as Spec 17E, 3rd edition, July 2003. 13628-6, Subsea production control systems, published API has adopted ISO 13628-6:2006 Ed.3, draft FDIS under preparation Ed.2 May 2006. (identical) as Spec 17F, 2nd edition, December 2006. 13628-7, Workover/completion riser systems, published API has adopted 13628-7:2005 NWIP edition 2 approved. IWOCS shall be included. Ed.1 November 2005. (identical) as RP 17G, 2nd edition, Ed.2, draft CD under preparation July 2006. 13628-8, ROV interfaces on subsea production systems, API has adopted 13628-8 (identical ) Ed.2, DIS voting terminates on 2011-04-11 Ed.1 published December 2002. as RP 17H, 1st edition, July 2004. 13628-9, ROT intervention systems, published June 2000, API has adopted 13628-9 (identical ) Combined with ISO 13628-8, Ed.1, to ISO 13628-8, Ed.2 Ed.1 based on NORSOK U-CR-007 (withdrawn and as RP 17M, 1st edition, April 2004. replaced with NORSOK U-007, Rev.2, June 1998) 13628-10, Specification for bonded flexible pipe, published API has adopted 13628-10:2005 13628-10 was put to systematic review in January 2009 and confirmed for further Ed.1 October 2005. (identical) as Spec 17K, 2nd edition, five years. November 2005 13628-11, Flexible pipe systems for the subsea and marine API has adopted 13628-11:2007 Revision based on API 17B 3rd (?) edition. JIP to develop next revision ongoing. Ed.1 riser applications, published September (identical) as RP 17B, 4th edition, ISO 13628-11:2007 confirmed for another five years in 2010, i.e. through 2015 2007. July 2008. 13628-12, Dynamic production risers, based on API RP2RD, API RP 2RD, 1st edition, June 1998 Extension request DIS within 2011-12-31 is sent Ed.1 DNV OS F-201 etc. (new) (reaffirmed May 2006), DNV OS F-201 Jan 2001 13628-13 Remotely operated tools and interfaces on subsea Keep 17H number. See ISO 13628-8, Ed.2 production systems Merge 13628-8 and 13628-9 into one standard. 13628-14 High integrity pressure protection system (HIPPS) Assigned number 17S NWIP approved June 2010. 13628-15 Subsea structures and manifolds Assigned number 17P FDIS uploaded onto the ISO system in January 2011 13628-16 Specification for flexible pipes ancillary equipment Assigned number 17L2 Meeting addressing DIS comments to be held in January 2011 13628-17 Recommended practice for flexible pipes ancillary Assigned number 17L1 Meeting addressing DIS comments to be held in January 2011 equipment - Subsea production system reliability and technical API RP 17N, 1st edition, March 2009 Coordinated with ISO 20815. No need to adopt into ISO as ISO 20815 is deemed to risk management be sufficient for ISO environment. - Subsea qualification Assigned number 17Q Official six weeks balloting of 17Q, 1st edition, was planned started primo March 5 ISO std ISO Std Title and basis API std current Plan/Comment 2010. Awaiting draft ISO NWIP. - Insulation and buoyancy spec. and RP - API examines JIP results for use as basis for API RP + Spec. MSP Feb 05. Status not found.