JM Fabrications DSM INTAKE Manifold

Thank you for your purchase, here are a few tips before installing your manifold:

 Make sure there is no debris inside the manifold from packaging.  It is a good idea to replace your manifold gasket with a new one.  You should also replace your throttle body gaskets as well.  Spraying the gaskets with red or copper RTV spray will also help the seal.  Torque specs for the intake manifold are as follows: 12mm bolt = 14 FT/LBS 14mm nut/bolt = 30 FT/LBS  Do not over tighten the throttle body bolts, aluminum is very soft and can strip easily.  To purchase one of our coil pack relocation brackets please visit our online catalog.

Enjoy!

Date: ______Serial #: ______