Georgia SIP Air Permit Application s1

Georgia SIP Air Permit Application Instructions for the completion of Form 2.03 Printing Operations

This form is to be completed and submitted with any Georgia SIP Air Permit application that involves the construction, operation, and/or modification of a printing press. The latest version of Form 2.03 is located at http://epd.georgia.gov/air/documents/ssppsip-app-form-203-printing-operations. Do not submit instructions with the SIP application.

Emission Unit ID: Refer to Form 2.00 Emission Unit List and enter the emission unit ID assigned to the new or modified printing operation in this column. The Emission Unit ID is an alphanumeric code with a maximum of four characters (e.g. 27, D1, AA, BL1, BL01). Emission Unit IDs are unique to each piece of equipment at a facility. Emission units, air pollution control devices, and stacks cannot have the same ID.

Emission Unit Name: Refer to Form 2.00, Equipment List, and enter the name of the printing equipment.

Construction Date: Enter the actual or anticipated date of completion for the installation or modification of the printing operation, typically month and year.

Type of Operation: Enter the specific printing method the new or modified press is designed to perform. Choose from one of the following, also listed at the bottom of Form 2.03:

A. Flexography B. Packaging Rotogravure C. Publication Rotogravure D. Screen Printing E. Heatset Offset Lithography F. Non-heatset Offset Lithography O. Other (Please include a detailed process description of any printing method that does not fall into one of the above categories)

Substrate: Enter the material(s) on which ink is applied in order to create the finished product (i.e. newspaper, plastic film, paperboard, cardboard, etc.).

Potential to Emit, For guidance in calculating the VOC and total HAP potential-to-emit of an individual press VOC and Total HAP: please refer to the Procedures to Determine PTE (http://epd.georgia.gov/air/documents/potential-emit-guidelines).

Individual HAP: Enter the name of the individual HAP compounds emitted from the printing process operation only.

CAS number: Enter the appropriate CAS number for each individual HAP emitted from the printing presses only, generally located on the MSDS sheet. A CAS number is a unique numerical identifier for chemical compounds, polymers, biological sequences and alloys.

Potential to Emit, Enter the potential to emit from the new or modified printing press for each, individual HAP in Individual HAP: tons per year. If the new or modified printing press has more individual Hazardous Air Pollutants (HAPs) than can be listed in the table, please include them in an attachment (See Item 16 in Form 1.00, General Information).

Actual Emissions: Enter the anticipated actual emissions from the new or modified printing press in tons per year. The actual emissions reflect the printing press emissions under typical operating hours, production rate, etc.

Georgia SIP Application Form 2.03, rev. September 2015 Instructions Facility Name: Date of Application:

FORM 2.03 – PRINTING OPERATIONS

Potential To Emit Emission Construction Type of Emission Unit Name Substrate VOC Total HAP Unit ID Date Operation1 (Tons per (Tons per year) year)

Potential to Emit Actual Emission Individual HAP CAS Number (Tons per year) (Tons per Year)

1 Indicate the type of operation using the appropriate letter code from below: A - Flexography B – Packaging Rotogravure C – Publication Rotogravure D – Screen Printing E – Heatset Offset Lithography F – Lithography (not heat set) O – Other (include a description of the operation type)

Georgia SIP Application Form 2.03, rev. June 2011 Page 1 of 1