Stoker Stove

Total Page:16

File Type:pdf, Size:1020Kb

Stoker Stove www.mulberrystoves.com MODEL AIR INTAKE REFERENCE BOILER Standard HPBXXX • Provides heat for up to 10 radiators with 3.5kW of radiant heat and convection heat to the room. • Thermostatically controlled settings and safety over-ride in the event of a power cut stopping the pump to the heating system. • Ample firebox to suit woodburning or any solid fuel. BOILER OSA Outside Air HPBOSA • As the standard boiler, but fitted with a spigot to connect to a 4”/100mm diameter pipe that brings air from outside the house. This air is used for combustion in the stove and this arrangement is ideal for ‘air-tight’ or ‘passive’ homes. 485 440 ø150 [ø5.91] 390 329 117 607 239 571 531 ø100* 190 197 105* *With OSA adaptor only 125* FIRE-FRONT FOR BACK BOILER Standard FFBBXX • A firefront with a baffle arrangement that increases the efficiency of your back-boiler STOKER... by up to 40%. • Turns wasted heat up the chimney into warmth for the room. • Saves money even when fire is not lit by preventing warm air leaving the house up the chimney. • Easily installed - D.I.Y. fitting in 15 minutes. FIRE-FRONT BASIC Standard FFDXXX • A front and door sealing the fireplace opening allowing the user to control the burn rate by controlling the amount of air available for combustion. • Saves money even when fire is not lit by preventing warm air leaving the house up the chimney. • Easily installed - D.I.Y. fitting in 15 minutes. 485 140 ...PERFECT FOR YOUR HOME! *On Fire-Front for Back Boiler only 485 *Top Baffle fits 95% of Multi-fuel insert stoves and firefronts providing Back Boilers. For some boilers this baffle should be unequalled levels of convection and radiant heat. shortened 607 Soft Seal 201 140 MODELS TO SUIT ALL APPLICATIONS *Transition grate integrates current back boiler grate. Reduce your heating costs and get greater warmth 201 from your existing fireplace. DEALER INFORMATION ISO 9001 2000 MUL_STOKER_BR_04/12 Quality Irish Stoves Ltd • Rathpatrick • Slieverue • Co. Kilkenny • Ireland Tel: +353-51-897415 Fax: +353-51-897451 Email: [email protected] cast a warm eye on life www.mulberrystoves.com www.mulberrystoves.com MODEL AIR INTAKE REFERENCE STOKER NON BOILER TAPERED BACK (Standard air intake) Standard NBTBXX Multi Fuel Insert stovesves and firefronts • Trebles the efficiency of your fire with up to 6.5kW of heat to the room • Certified efficiency of 76% The unique design and cast iron constructionconst of the STOKER insert stove allows heat to be delivered • Fits into a standard fireplace without removing the fireback throughout the room because a convectionco stream distributes heat much more widely than radiant heat alone can achieve. The STOKER is now available in eight different versions to cater for every fireplace. • Can be fitted in 15 minutes Taking up a very small space on the hearth with minimal intrusion into the room, the STOKER is ideal for the modern home. NON BOILER TAPERED BACK (Outside air intake) Outside Air NBTBOS • As the standard tapered back, but fitted with a spigot to connect to a 4”/100mm VARIOUS OPTIONS diameter pipe that brings air from outside the house. This air is used for combustion in the stove and this arrangement is ideal for ‘air-tight’ or ‘passive’ homes. NON BOILER BOILER FIREFRONT Choice of back configurations Choice of combustion air Choice of configurations intakes The boiler STOKER may be Back Boiler ") Tapered Back 8 5 ") ordered with an outside air 2 Can be fitted in 15 minutes For fireplaces already fitted 1 feed-spigot, or in the standard 600 (23 ") without removing the fireback. with a back-boiler 2 1 configuration using combustion 519 (20 Square Back air from within the house. Standard 316 (12 Fireback has to be removed A firefront door only, to control providing larger firebox for those 59 [2.34]* ø100 [ø3.94]* draught and reduce heat loss 240 [9.43] * who burn predominantly wood. up the chimney. *With OSA version only Outside Air 484 (19") 3 Both tapered and square back 377 (14 4") models are available with an ") 8 outside air feed-spigot if 1 required. This permits air for combustion to be taken from 188 (7 outside the house where the house is ‘air-tight’ or ‘passive’. 1 138 (5 2") NON BOILER SQUARE BACK (Standard air intake) Standard NBSBXX • As the standard tapered back, but with a square back giving better shape of firebox for those people who burn mainly wood. • Requires the fireback to be removed when fitting. NON BOILER SQUARE BACK (Outside air intake) Outside Air NBSBOS Secondary air and Outlet slots for convection Spin Valve controls primary combustion air Genuine Mulberry. The • As the standard square back, but fitted with a spigot to connect to a 4”/100mm air wash intake heat on top of Insert supply, with intake slot for convection heating Stoker is a Registered Design diameter pipe that brings air from outside the house. This air is used for combustion in the stove and this arrangement is ideal for ‘air-tight’ or ‘passive’ homes. 129 [5.08] 400 [15.75] ø150 [ø5.91] FEATURES COMMON TO ALL STOKER MODELS 200 [7.87] ") 8 5 • Improves your house Energy Rating (BER) • Works perfectly in normal chimney 360 [14.17] • Burns Wood, Coal, Anthracite, Peat Briquettes and Turf • Can be used with or without flexible flue liner 600 (23 548 [21.57] F• Maximum fuel consumption 0.93kg per hour • Guaranteed Irish – manufactured in Ireland • Clean burning with low emissions - O.26% CO (at 13% O2) • Certified to EN13229:2001 and CE approved 59 [2.34]* 138 [5.43] ø100 [ø3.94]* • Unique bay window gives wide view of fire • Manufactured by company certified to ISO 9001 240 [9.43] * • Window air wash for clean glass and ISO 14001 *With OSA version only • Controlled burn rate – 0.5kW to 6.5kW per hour • Backed by Mulberry CUSTOMER CARE • Will burn overnight.
Recommended publications
  • SFA Guide to Open Fire Installation
    SFA Guide to Open Fire Installation Solid Fuel Association 95 High Street Clay Cross Chesterfield Derbyshire S45 9 DZ www.solidfuel.co.uk Open Fires Introduction If the open fire is the main heat source in a room then to comply with Approved Document J 1A and 1B the minimum efficiency of the finished installation must be at least 37%. To achieve this, the installation will need to meet BS 8303and have a sealed in, controlled, open fire. The installation of a simple inset open fireback is not an easy task and must be undertaken correctly and with care. If this is done it will provide the end user with many years of trouble free use. The main components commonly employed in a typical installation are as follows:- 1. Fireback or boiler set 2. Throat forming lintel 3. Fire surround and superimposed hearth 4. Appliance Note: the appliance should be constructed in accordance with BS 4834 and with components (items 1 to 4 above) manufactured to the requirements of BS 1251 (Specification for open fireplace components). When manufactured to these requirements, a minimum efficiency of 37% is deemed to have been met. Where an inset open fire includes a boiler, the efficiency must be confirmed using the test given in BS 4834. All of the above components are installed or fixed to an appliance recess supported by a constructional hearth both of which are fully described later in this chapter and additional information in BS 8303. The installation methods described later deal with fireback or boiler set into a recess where a new surround is to be fitted or where the existing tiled surround is to be used.
    [Show full text]
  • Thermaltricity Air Source Heat Pumps Models KS015R & KS02R
    Thermaltricity® Air Source Heat Pumps Models KS015R & KS02R Introduction A Thermaltricity Air Source Heat Pump uses the same mechanical technology as a refrigerator and air conditioner but for the generation of hot water. The real selling point is the fact that it uses 1 unit of electricity to generate approximately 3 units of heat. In comparison, a standard immersion heater uses 3 units of electricity to provide 3 units of heat. The introduction of Air Source Heat Pumps to the domestic household and small business user has become financially possible because of technical advances in planet friendly refrigerants and new compressor technology. With low running costs, they are a cost effective option in new house builds, energy efficient refurbishments or retrofits and will help to mitigate the effects of increasing gas and oil prices. Features Effective efficiency = 250% to 400% Simple installation Designed to heat water continuously For a 4 person household the annual electricity use is up to 75% less than heating a conventional hot water tank Work well in humid climates Use CFC-free Refrigerant R417a Thermaltricity Air Source Heat Pumps | page 1 of 4 | v.13 290906 21 Haviland Road, Ferndown Industrial Estate, Wimborne, Dorset, BH21 7RZ Tel: +44 (0)1202 890234 Fax: +44 (0)1202 876252 Heat pumps in various forms have been around for many years and are used worldwide for both domestic and commercial applications Life expectancy of 15 years Can be integrated with a solar thermal collector through a Powertech Thermal Store for greater
    [Show full text]
  • Biomass Boilers & Stoves
    CI/SfB (56) First Issue December 2017 Biomass Boilers file:///Users/pjaspare/ & Stoves Downloads/LDS7_FINAL.pdf Renewable Heating Solutions from a Natural & Sustainable Fuel Source SUPERIOR HEATING SOLUTIONS SINCE 1980 2 Firebird Biomass Boilers & Stoves Renewable energy from a natural & sustainable fuel source. Contents Benefits of Biomass as a Heating Option 4 What is a Biomass Heating System? 6 Tavistock Wood Pellet Biomass Boilers 8 Dartmoor Wood Pellet Biomass Stove 14 Exmoor Wood Pellet Biomass Stove 16 Firebird Wood Burning Dry Stove 21 Firebird Support 22 3 Firebird Products Ltd are market-leading manufacturers of heating products with a proven track record built on the global supply of heating systems. Established in Ireland in 1980, the Firebird name has become synonymous with performance, quality and innovative design. At the forefront of technology, Firebird are committed to providing cost-effective, energy-efficient heating solutions that not only meet, but easily exceed today’s stringent legislative requirements. Historically an oil-fired boiler manufacturer; the addition of renewable heating options, which include air source heat pumps, biomass boilers, stoves and solar thermal systems enable Firebird to offer a total heating solutions package. 4 Firebird Biomass Boilers & Stoves Benefits of Biomass as a Heating Option Firebird’s biomass heating solutions provide an economical and environmentally-friendly alternative to traditional heating and hot water systems. 7 5 3 4 8 2 1 6 1 Firebird Tavistock 5 Sanitary system Wood Pellet Boiler 6 Accumulator 2 Pellet hopper (optional) 7 Solar thermal panel 3 Radiators 8 Solar station 4 Underfloor heating 5 Self-contained and fully automated to provide consistent heat Long-term, sustainable, renewable energy source Cost-effective heating option – unaffected by fluctuating fossil fuel prices Eligible for domestic Renewable Heat Incentive payments (RHI)* MCS & HETAS Approved** * Applicable to biomass boilers or stoves with a back boiler.
    [Show full text]
  • TB) 101 Replaces the Version Originally Published 1 April 2009 Which Is Now Withdrawn
    Technical Bulletin 101 Developed with HSE Title: HSE Safety Alert Risks from redundant solid fuel back boilers Date issued: 1 September 2010 Note: This version of Technical Bulletin (TB) 101 replaces the version originally published 1 April 2009 which is now withdrawn. This version has been reviewed and where appropriate revised to ensure that it remains both current and relevant. This Technical Bulletin alerts Gas Safe Registered businesses/engineers to the HSE Safety Alert related to risks from redundant solid fuel back boilers Introduction The Health and Safety Executive (HSE) in Great Britain (GB) has issued a Safety Alert aimed at homeowners, tenants, landlords and heating professionals following five incidents in GB since 2008, where redundant solid fuel back boilers have exploded. The HSE have stated that “a number of these incidents led to injury and sadly, in one case, a fatality”. The risk can arise when a disused solid fuel boiler which has not been safely decommissioned has been left at the back of a fireplace and a coal or wood fire is lit in front of it. This can mean that the boiler heats up causing the boiler casing to explode. Therefore, if you have (or know of) a redundant solid fuel back boiler you should not light an open fire in front of it. The HSE believes information published in its 2008 Safety Alert should help identify whether individuals have this potential risk in their properties/housing stock and what steps they should take. The HSE is urging those who are unsure of whether they have a redundant solid fuel back boiler behind their fireplace to seek further advice from their landlord or a competent professional such as a Gas Safe registered business.
    [Show full text]
  • Grant Back Boiler Instruction
    Project1:Layout 1 15/01/2013 09:23 Page 1 Installation and Operating Instructions for the GRANT TRIPLE PASS EASY CLEAN - HIGH OUTPUT BACK BOILER This Leaflet should be left with the Householder 2 1 3 GUARANTEE The Grant Triple Pass boiler is guaranteed for five years from date of purchase. This does not affect your statutory rights. This guarantee does not include cast iron parts, labour, handling or shipping. 11 9 13 4 12 8 14 8 7 6 10 5 1 Boiler 16" or 18" 2 Damper 16" or 18" 6 3 Removable Cleaning Door 16" or 18" 4 Drop Plate 16" or 18" 5 Ashpit Door 16" or 18" 6 2 Adjusting Brackets (left and right) 7 Main Frame 16" or 18" 8 Side Cheeks (left and right) IT IS RECOMMENDED THAT THIS LEAFLET BE 9 Grate 16" or 18" 10 Gas Ignitor 16" or 18" STUDIED BEFORE OPERATION OF BOILER 11 Cleaning & Operating Tool 12 Front Firebars 16" or 18" DOC: 50 REV:01 OCT2002 13 Ashpan 16" or 18" 14 Queenstar Operating Tool A Log Bar and Deepening Plate is GRANT ENGINEERING LTD. also available Crinkle, Birr, Co. Offaly, Ireland. When ordering parts state colour of enamelled Telephone: parts, no, and size i.e. 16" or 18" 057 9120089, 9120352, 9120793 Project1:Layout 1 15/01/2013 09:23 Page 2 EFFICIENT OPERATION OF APPLIANCE PROCEDURE ON LIGHTING FIRE: A deepening bar should be fitted when burning smokeless fuels and Close boiler damper, open ashpit door fully. Place firelighters on grate removed when burning coal.
    [Show full text]
  • British Engine Boiler Insurance Company Limited
    British Engine, Boiler and Electrical Insurance Company Limited, 1878- 1991 Location and extent of archival material: SS4/2-8, 57 boxes The listing has been completed in box number order and there has been no attempt to arrange material into series as the collection simply includes a large selection of miscellaneous company catalogues. Company history The Company was founded in Manchester on November 12 1878 under the title of ‘The Engine and Boiler Insurance Company’ with RB Longridge as Chairman and Micheal Longridge (his nephew) as Chief Engineer. The Longridge family were established engineers at the beginning of the 19th Century. They were originally iron masters of Bedlington, Northumberland who also supplied castings and forgings to the engineers of the day. They were involved in the early development of industrial steam engines and were business partners with both George and Robert Stephenson. Members of the Longridge family continued to serve the Insurance Company from the early days until the introduction of nuclear power. RB Longridge formed The Steam Boiler Assurance Company in 1859 but later resigned. Following his resignation he formed ‘The Engine and Boiler Insurance Company Limited’. Within two years the name changed to ‘The Engine, Boiler and Employers’ Liability Company Limited’. In 1903, the Silver Jubilee year the title ‘British Engine, Boiler and Electrical Insurance Company Limited’ was adopted, and in 1978 the title was abbreviated to ‘British Engine Insurance Limited’. The family association terminated in 1966 with the retirement of HM Longridge. The name of Longridge was perpetuated in the title of the Head Office building in Manchester- Longridge House, erected in 1959 on a site embracing that of the original Manchester Steam Users Association of which RB Longridge was Chief Inspector.
    [Show full text]
  • Analysis of Boiler Efficiency– Case Study of Thermal Power Stations
    ANALYSIS OF BOILER EFFICIENCY– CASE STUDY OF THERMAL POWER STATIONS 1.0 INTRODUCTION Looking to the statically data, rate which power demand increases is extremely very high compared to the rate at which generation capacity increase. Boiler is a heart of power plant, so its efficiency is directly affected to the all over efficiency of the plant. It is quite obvious that approximately 65% to 70% power generation comes out from Thermal Power Plant uses Coal as fuel available from various parts of India, where transportation is also made easy and timely. Power is one of the basic infrastructures necessary for the Industries and socio economic development in the State. Installed capacity of the State has increased from 315 MW in 1960-61 to 11711 MW in 2009- 2010. Per capita consumption of power in the State of Gujarat in 2008-09 was 1446 Units (as per CEA revised formula) which is almost double of all India average. For finding out the Power Plant efficiency and its performance, the Ukai and Gandhinagar Thermal Power Plants are being selected for the present study. The performance of boiler was carried out by way of calculating the efficiency of Boiler by direct method and indirect method. It has been also discussed the methods how GSECL (Gujarat State Electricity Corporation Ltd.) calculate the efficiency of Boiler. The important discussion on the point how to increase the efficiency of Boiler. The study scope encompassed the following major tasks: • Discussion of methods to reduce the heat rate of existing power plants. • Preparation of case studies quantifying heat rate reductions resulting from the methods described herein.
    [Show full text]
  • Background Document: AP-42 Section 1.3 Fuel Oil Combustion
    REPORT ON REVISIONS TO 5TH EDITION AP-42 Section 1.3 Fuel Oil Combustion Prepared for: Contract No. EPA 68-D7-0068, WA-005 EPA Work Assignment Officer: Roy Huntley Office of Air Quality Planning and Standards Office of Air And Radiation U. S. Environmental Protection Agency Research Triangle Park, North Carolina 27711 Prepared by: Eastern Research Group Post Office Box 2010 Morrisville, North Carolina 27560 September 1998 7997\92\04\Suplemnt.B\Reports\Chptr01\01-03.002 (6-26-3) Table of Contents Page 1.0 INTRODUCTION ..................................................... 1-1 2.0 REVISIONS.......................................................... 2-1 2.1 General Text Changes............................................ 2-1 2.2 Sulfur Oxides, SOx ............................................... 2-1 2.3 Sulfur Trioxide, SO3 ............................................. 2-1 2.4 Nitrogen Oxides, Nox ............................................. 2-1 2.4.1 Mid-Sized Fuel Oil Fired Boilers ............................. 2-2 2.4.2 Utility Boilers ............................................ 2-4 2.5 Carbon Monoxide, CO ............................................ 2-6 2.6 Filterable Particulate Matter, PM ................................... 2-6 2.7 Condensable Particulate Matter, CPM ................................ 2-8 2.7.1 Description of Documents Evaluated .......................... 2-8 2.7.2 Emission Factor Development ................................ 2-9 2.8 Total Organic Compounds (TOC) and Non-Methane TOC (NMTOC) ..... 2-12 2.9 Particle Size
    [Show full text]
  • General Guidance on the Selection and Installation of Flues and Chimneys for Wood Burning and Multi Fuel Appliances in Residential Properties
    General Guidance on the selection and installation of flues and chimneys for wood burning and multi fuel appliances in residential properties. This guide has been produced by the BFCMA to provide advice and general guidance on the selection and installation of chimneys and flues for maximum performance, safety and durability. It is important to ensure that the chosen chimney and the heating system, as a whole, are suitable for the purpose intended and conform to the relevant regulations and standards. The BFCMA is the UK’s only Trade Association representing manufacturers and sole UK distributors of factory made chimney and flue products. It was established to promote the advantages of chimneys and encourage continued improvements in standards, efficiency and service. Contact details of BFCMA members are shown on the back page of this guide. Published by the British Flue and Chimney Manufacturers Association. 2 Waltham Court, Milley Lane, Hare Hatch, Berks, RG10 9TH. Tel: 0118 940 3416 Fax: 0118 940 6258 Email: [email protected] www.bfcma.co.uk Introduction Regulations The construction and application of chimneys and flues is covered by UK Building Regulations in conjunction with the relevant European and British Standards. Whilst these differ in emphasis, they all mandate the safe application of the chimney no matter where and how used. These Regulations and Standards dictate the minimum criteria which it is necessary to apply if the chimney or flue is to function safely and correctly. Building control approval is necessary for building new chimneys and in some cases for relining old chimneys particularly if some alteration or change of the heating appliance occurs.
    [Show full text]
  • Boiler Identification
    Stroma Certification Ltd CPD Assessment Guide: Boiler Identification This Guide explains boiler identification and use of PCDF according to the RdSAP software. There is a question section at the end of the Guide for you to complete in order to pass this section of the CPD. If you have any questions regarding boiler identification that are not covered in this Guide, please email [email protected] with details of your enquiry. Alternatively, please call Stroma Certification on 0845 621 11 11. Date: 24 October 2014 Revision: v1.1 © Stroma Certification Ltd Boiler Identification CPD Guide v1.1 Page 1 of 22 Contents Regular Boilers ................................................................................................................................................ 3 Combi Boilers .................................................................................................................................................. 6 Condensing Boilers ......................................................................................................................................... 7 CPSU – Combined Power and Storage Units ............................................................................................. 10 Electric Central Heating ................................................................................................................................ 10 Types of Electric Boiler ................................................................................................................................
    [Show full text]
  • Model 4WI 100 - 800 HP
    Model 4WI 100 - 800 HP 4 Pass Wet-Back with Integral Burner CONTENTS GENERAL . .4 FEATURES AND BENEFITS . .4 DIMENSIONS AND RATINGS . .5 PERFORMANCE DATA . .13 Specifying Boiler Efficiency . .13 Efficiency Specification . .13 Emissions . .14 ENGINEERING DATA . .19 Sound Level . .19 Gas-Fired Burners . .19 Oil-Fired Burners . .20 General Boiler Information . .25 Boiler Room Information . .25 Stack Support Capabilities . .25 Stack/Breeching Size Criteria . .25 Boiler Room Combustion Air . .25 Sample Specifications - Steam . .31 Sample Specifications - Hot Water . .43 1 Rev. 2-13 Model 4WI 100-800 HP Boilers LIST OF FIGURES Figure A2-1. Model 4WI Steam Boiler 100-800 HP . 6 Figure A2-2. Model 4WI Hot Water Boiler 100-800HP . 8 Figure A2-3. Predicted stack temp. increase for pressure greater than 125 psig - Model 4WI . 15 Figure A2-4. Typical Gas Piping Layout . 21 Figure A2-5. No. 2 Oil Piping, Single Boiler Installation, Remote Oil Pump . 23 Figure A2-6. No. 2 Oil Piping, Multiple Boiler Installation, Remote Oil Pumps . .23 Figure A2-7. No. 2 Oil Piping, Multiple Boiler Installation . 24 Figure A2-8. Typical Fuel Storage Tank Arrangement . 25 Figure A2-9. Boiler Room Length (Typical Layouts) . 29 Figure A2-10. Boiler Room Width (Typical Layout). 29 Figure A2-11. Breeching Arrangement . 30 LIST OF TABLES Table A2-1. Horsepower -vs- Shell Diameter . 3 Table A2-2. Model 4WI Steam Boiler Ratings 100 to 800 HP . 6 Table A2-3. Model 4WI Steam Boiler Dimensions . 7 Table A2-4. Model 4WI Hot Water Boiler Ratings . 8 Table A2-5. 4WI Hot Water Boiler Dimensions .
    [Show full text]
  • Heating & Domestic Hot Water Systems for Dwellings
    Heating and Domestic Hot Water Systems for Dwellings – Achieving compliance with Part L & Energy Performance of Buildings Regulations 2019 Prepared by the Department of Housing, Planning and Local Government and the Sustainable Energy Authority1 of Ireland housing.gov.ie Contents 1. Introduction ........................................................................................................ 5 1.1 How to use this guide ........................................................................................ 6 1.2 Glossary………………………………………………………………………………..9 1.3 The 2019 Building Regulations requirements and the guidance in TGD L Dwellings 2019, Sections 1 and 2 ......................................................................... 10 1.4 Replacement of primary heating appliances ................................................. 111 2. Gas-fired space heating and hot water systems ........................................... 12 2.1 Scope of guidance .......................................................................................... 12 2.2 Key terms ........................................................................................................ 13 2.3 Gas-fired wet central heating systems ............................................................ 14 2.4 Gas-fired range cookers with integral central heating boiler ........................... 30 2.5 Gas-fired warm air heating .............................................................................. 31 2.6 Gas-fired fixed independent space heating appliances ..................................
    [Show full text]