Refinery and Oil Field Chemicals

EXPORT PRODUCT CATALOGUE

（REFINERY AND OIL FIELD CHEMICALS）

REFINERY & CHEMICAL PRODUCT EXPORT DIVISION

MARCH, 2010 CONTENT

Refinery Additives...... 3 Oil Soluble Demulsifier (Emulsion Breaker)...... 3 Water Soluble Demulsifier (Emulsion Breaker)...... 3 CO Combustion Promoter...... 3 Dimethyl Disulfide...... 3 High-Efficiency Desulphurizer...... 3 Slurry Oil Antifouling Agent...... 3 Light Olefins-enhancing FCC Catalyst...... 3 Catalytic Molecular Sieve Antiscorching Activator...... 3 Catalytic Cracking Sulphur Reducing Agent...... 3 Sweetening Activator...... 3 Neutralizing Corrosion Inhibitor...... 3 Antifouling Agent for Heat Exchangers of Hydrotreating Feedstock...... 3 Defoaming Agent for Delayed Coking Unit...... 3 Special Decoking Agent for Delayed Coking Units...... 3 Sulfonated Cobalt Phthalocyanine Catalyst...... 3 Polyphthalocyanine Cobalt Catalyst...... 3

Chemical Addtives...... 3 Antifoulant for Caustic Washing System (Yellow Oil Inhibitor)...... 3 Coking Inhibitor...... 3 Polymerization Inhibitor...... 3 4-tert-Butylcatechol...... 3 Cobalt Acetate...... 3 Manganese Acetate...... 3 Antimony Triacetate...... 3 Antimony Tris-ethylene glycol...... 3 Calcium Hypochlorite Granular...... 3 Etherification Resin Catalyst...... 3 β-Mercaptoethanol...... 3 Triethyl Aluminum...... 3 Tetrabromoethane...... 3 Hydrobromic acid...... 3

Chemical Fiber Additives...... 3 Titanium Dioxide - Titania...... 3 Sodium Methyl Sulfonate...... 3

Plastic Additvives...... 3 2 Antioxidant 1010...... 3 Antioxidant 1076...... 3 Antioxidant 168...... 3 Antioxidant BHT, 264 , T501...... 3 Heavy Tar Stearic Acid Calcareous...... 3 Zinc Stearate...... 3 Hydrated Magnesium Silicate...... 3 Glyceryl Monostearate...... 3 Erucamide...... 3 Oleamide...... 3

Ion Exchange Resins...... 3 Gel and Macroporous Strong Base Anion Exchange Resins...... 3 Gel-type Polystyrene Strong Cation Exchange Resins...... 3

Water Treatment Chemicals...... 3 Polyaluminum Chloride...... 3

Lubricant Additives...... 3 T151, Mono-Succinimide...... 3 T161, High Molecular Weight Succinimide Ashless Dispersant...... 3 T101 Lowbased petroleum calcium sulfonate...... 3 T106 High Base Synthetic Calcium Sulfonate...... 3 T803B, poly-α-Olefine...... 3 S206, Calcium Sulphurized Ackgl phenate...... 3 T202, Zinc Di-Alky Dithio phosphate...... 3 T203, Zinc Di-I-octyl Dithio phosphate...... 3 Benzene Ramification, Metal Deactivator T551...... 3 T746, Dodecylene Maleic Acid...... 3 T152, Bis-Succinimide...... 3 T801, Alkyl Naphthalene...... 3 H4205, General Gear Oil Compound...... 3 H5039, Antiwear Hydraulic Fluid Additive Package...... 3 T304, Antiwear Additive, Dibutyl phosphite...... 3

Fuel Oil Additives...... 3 Gasoline Stabilizing Additives...... 3 Antistatic Agent for Gasoline and Diesel...... 3 Antioxidannt 2.6.4(Com.Grade)(T 501)...... 3 Diesel-Oil Cetane Number Improver...... 3 Diesel fuel flow improver...... 3

Solvent...... 3 3 P-DEB (Para-Di-ethyl Bezene)...... 3 Sulfolane...... 3

Adsorbent...... 3 High Efficiency Particulate Clay (Granule Clay)...... 3 Activated Clay...... 3

Oil Drilling Chemicals...... 3 Complex ionic acrylate...... 3 Sulfonated phenol-formaldehyde resin...... 3 Ammonium Hydrolyzed Polyacrylonitrile...... 3 Sodium Carboxymethyl Cellulose(LV)...... 3 Sodium Carboxymethyl Cellulose(CMC-HV)...... 3 Sulfonated Tannin...... 3 Sulfonated lignite...... 3 Sulfonated Asphalt...... 3 Potassium Polyacrylamide...... 3 Hydrolyzed Polyacrylonitrile Potassium...... 3 Hydrolyzed Polyacrylamide Powder...... 3 Barite Powder...... 3 Sefstromite Powder...... 3 Ilmenite Powder...... 3

Oil Production Chemicals...... 3 Crude Oil Paraffin Inhibitors & Removers...... 3 Viscosity Reducer for viscous crude...... 3 Crude Oil Demulsifier...... 3

Acid Fracturing Chemicals...... 3 Hydroxyl Guar Gum...... 3 Fracture Proppant...... 3 Clay Stabilizer...... 3 Cleanup Additive...... 3

Tertiary Oil Recovery Chemicals...... 3 Polyacrylamide...... 3 DYD Type Surfactants for EOR...... 3 Petroleum Sulfonate...... 3

4 Refinery Additives Refinery Additives: Oil Soluble Demulsifier

Oil Soluble Demulsifier (Emulsion Breaker)

【Product Name】 Product Name: Oil Soluble Demulsifier (Emulsion Breaker) 【Quality Index】 1. Outer appearance amber, viscous liquid 2. Relative Density 20℃ g/cm3 0.85 -0.99 3. Product Color APHA ≤ 300 4. PH Value 6 ~ 9 【Application】 This product can be used by refineries as an aiding agent for dehydrating and desalting in the electric desalting system of the crude oil. It carries the characteristic of low dehydrating temperature, quick dehydrating speed, low water content in the dehydrated oil, high desalting ratio and clear dehydrated water. 【Recommended Dosage】 Subject to the specification of oil, normal injection is around 20ppm. 【Storage & Packaging】 This product is packed in clean and dry iron drums of net weight 180kg each. Avoid violent collision during transportation so as to prevent breakage. 【Precautions】 This product obsorbs moisture and the package must be air tight. Avoid direct sun light. Open flames prohibited. To be kept in a dry and well ventilated warehouse.

5 Refinery Additives: Water Soluble Demulsifier

Water Soluble Demulsifier (Emulsion Breaker)

【Product Name】 Product Name: Water Soluble Demulsifier (Emulsion Breaker) 【Quality Index】 1、Outer appearance Colorless or light-yellow liquid 2、Density 20℃ g/cm3 0.90-1.20 3、Kinematic viscosity 40℃ mm2/S ＜ 40 4、Solubility Soluble in water and ethanol 5、PH（1% aqueous solution） 6.00 ~ 9.00 【Application】 This product can be used by refineries as an aiding agent for the water-wash electric desalting of the crude oil, to realize quick demulsifying and dehydrating effects. It is also applicable to oil fields for the demulsification and dehydration of the crude oil. 【Recommended Dosage】 Under normal conditions, 30~50ppm. 【Storage & Packaging】 This product shall be stored in a shady, cool, ventilated, dry warehouse. The shelf life is 2 years. This product is packed in iron drums of net weight 180kg each. 【Precautions】 This product is flammable, therefore, shall be kept far away form open flame.

6 Refinery Additives: CO Combustion Promoter

CO Combustion Promoter

【Product Name】 Product Name: CO Combustion Promoter 【Molecular Formula/Structural Formula】

Pt/Al2O3 【Performance Characteristics】 Good combusion-supporting results, fast reaction and high conversion(over 95%), contributing to the elimination of carbon deposition to recover the activity of the catalyst, improvimg light oil absorption rate (2-3%), reducing coke content ( 0.5%). 【Quality Index 】 Implementing Manufacturer’s Standards items type quality index Active component （%） 1 Pt;0.01±0.0005 2 Pt;0.02±0.001 3 Pt;0.03±0.002 5A Pt;0.05±0.002 5B Pt;0.05±0.002

A12O3% ≥ 95

Fe2O3(%) ≤0.06

Na2O(%) ≤0.5 Specific surface area (m2/g) 100-260 Stacking denstiy (g/ml) 0.85-1.05 Particle size distribution (%) ≥60 40-105u Relative conversion ≥95 【Application】 Regenerative combustion-supporting agent used in the catalytic cracking unit. 【Recommended Dosage】 The system inventory is 0.1-5% of which of the FCC equilibrium catalyst. Its recruitment is 1- 3% of the additional amount of FCC catalyst per day after normal combustion. 【Storage & Packaging】 1.Plastic buckets and cardboard drums lined with plastic bags. 40kg net per barrel or determined by the user. Marked outside of the bucket: product name, number of the implementated standard, production date, shelf life, the name, address, telephone of producer and so on. 2.Prevent the sun and rain in the transport. The product should be stored in dry ventilated database, should be moisture-proof, and prevent pollution. The storage temperature should be above

7 0 degree celcius. 【Precautions】 Moistureproof, prevent chemical pollution.

8 Refinery Additves: Dimethyl Disulfide

Dimethyl Disulfide

【Product Name】 Product Name: Dimethyl disulfide Synonyms: Dimethyldisulfide; 2,3-Dithiabutane; Sulfa-Hitech; DMDS CAS Registry Number: [ 624-92-0 ]

【Molecular Formula/Structural Formula】

Formula: C2H6S2 Molecular Weight: 94.2

【Quality Index 】 Specifications Appearance: colorless to yellowish liquid Purity (%): 99.5 min. Methyl mercaptan (%): 0.1 max. Dimethyl sulfide (%): 0.1 max. Moisture (ppm): 600 Dimethyl Polysulfide (%): 0.2 max. Sulfur content (%): 68 min.

【Application】 Used as an activator in hydrodesulfurization process of oil refinery, and in resulfurization process, an inhibitor in cracking coking of petrochemicals, also an intermediate for solvent and pesticides.

【Packaging】 200 kg net in galvanized drum, PE drum or ISO tank.

9 Refinery Additives: High Efficiency Desulphurizer

High-Efficiency Desulphurizer

【Product Name】 Product Name: High-Efficiency Desulphurizer 【Quality Index】 Outer appearance Colorless or light-yellow liquid Density 20℃ g/cm3 1.035-1.055 Kinematic viscosity 20℃ mm2/S 90-115 Freezing point ℃ ≤ -45 Refractive index 20℃ 1.4600-1.4700 Solubility Intersoluble with water Content (main component) % ≥ 95 【Application】

It is mainly used for removing H2S from refinery gas and natural gas. 【Recommended Dosage】 Dilute the desulfurizer with demineralized water into a solution of 30~40% concentration, the ratio between desulfurizer and hydrocarbon shall be kept at 1:4. 【Storage & Packaging】 This product shall be stored in a shady, cool, ventilated, dry warehouse. The shelf life is 2 years. This product is packed in galvanized iron drums of net weight 200kg each. 【Precautions】 This product is flammable, therefore, shall be kept far away from open flame.

10 Refinery Additives: Slurry Oil Antifouling Agent

Slurry Oil Antifouling Agent

【Product Name】 Product Name: Slurry Oil Antifouling Agent (Slurry Scale Inhibitor) 【Quality Index】 Outer appearance Brownish red liquid

Density 20℃ g/cm3 0.87-0.95 Kinematic viscosity 20℃ mm2/S 10 ~ 50 Freezing point ℃ ≤ -25 【Application】 This agent is for inhibiting scale formation and coking in the slurry heat-exchange system of heavy-oil catalytic cracking units, and thus improving the efficiency of heat exchange and prolonging the working cycle of facilities. 【Recommended Dosag】 150~300ppm of this product shall be maintained in the circulating slurry 【Storage & Packaging】 This product shall be stored in a shady, cool, ventilated, dry warehouse. The shelf life is 2 years. This product is packed in galvanized iron drums of net weight 170kg each. 【Precautions】 This product is flammable, therefore, shall be kept far away form open flame.

11 Refinery Additives: Light Olefins-enhancing FCC Catalyst

Light Olefins-enhancing FCC Catalyst

【Product Name】

Product Name: Light Olefins-enhancing FCC Catalyst

【Performance Features】

It is used in (FCC equipments to improve the yield of propylene(up 1%), butylene(up 0.5%) and ethylene.

【Quality Index】

Item Specifications Test Methods Loss on Ignition , m% ≤ 10 RIPP32-90

Al2O3, m% ≥25 RIPP42-90 Abrasion Index , m%/h ≤ 3.0 RIPP29-90 Apparent Density, g/ml 0.60-0.75 RIPP32-97 Specific Area , m2 /g ≥60 GB/T5816-1995 Pore Volume, ml/g ≥0.06 RIPP151-90 0-40 μm,v% ≤ 22 QJ/CL.4.2.009 0-149 μm,v% ≥90

【Storage & Packaging】 To be stored in shady, cool, well ventilated dry warehouse. Shelf life is 2 years. Packaged in double layer woven sacks lined with cloth, 25 kg net weight each.

【Precautions】 The product is non-flamable, non-explosive, non-corrosive and non-toxic. Keep away from moisture, acid, alkaline and other chemical pollution.

12 Refinery Additives: Antiscorching Activator

Catalytic Molecular Sieve Antiscorching Activator

【Product Name】 Product Name: Catalystic Moluecular Sieve Antiscorching Activator 【Application】 The surface activity, acidity and rare-earth metal act together and improve respectively the viscosity of the feed stock, the acidity of B-acid and L-acid of the primary catalyst and the hydrogen transfer reaction, and hence effectively improve the atomization and vaporization effect of feed stock, the activity and selectivity of primary catalyst and contribute to the catalytic cracking reaction, increase the yield of LPG, gasoline and diesel ( the proportion of these three products depends on the characteristics of the feed stock oil, the property of the catalyst, the feature of the process, operating condition and production plan), with a increase of toal liquid yield of above 1.5% (m), at the same time, slow down the deactivation speed of the catalyst caused by poisonous substances such as alkaline nitrogen compound and heavy metals. By keeping the activity of the catalyst at a high level, remarkable economic benefits is achieved. The additive can be used for RFCC, MGD, ARGG and DCC plants. 【Performance Features】 This additive is an oil soluble liquid, non flammable, non explosive, not corrosive to the equipment. Mix it directly with the feed stock oil, and no modification of plant process parameters is needed. Easy injection, without influence to the load of the plant. It functions in the form of homogeneous molecules, and does not cause scorching, polution or aging. 【Quality Index】 Appearance Brown liquid Density（20℃，g/cm3） 0．85～1.00 Solubility Intersoluble with oil Freezing Point ℃ ≤-20 Effective substance content ≥70% 【Recommended Dosage】 Using metering pump, inject at the inlet of the feed stock pump and mix uniformly with FCC feed stock. Reference Dosage: 60～100ppm in fresh feed stock。（in higher speed period, the injection shall be 200ppm，for 5～7 days.）【Storgae & Packaging】 Packed in iron drums, net weight 180kg each. To be stored in clean, cool, well ventilated dry warehouse. Keep away from flames. Shelf life is 1 year.

13 Refinery Additives: Catalytic Cracking Sulphur Reducing Agent

Catalytic Cracking Sulphur Reducing Agent

【Product Name】 Product Name: Catalytic Cracking Sulphur Reducing Agent 【Application】 It is used to reduce the sulphur content of gasoline and diesel by 20 ～ 30 %; it can also improve the activity of catalysts. 【Quality Index】 Item Specifications Test Methods Effective Content, m % ≥15 atomic absorption Appearance light yellow - yellowisheye survey brown liquid Density, g/ml 1.30-1.45 GB/T 2540-81 Viscosity(50 ℃), mm2 /s 15-20 GB/T 265-88 Solidifying Point, ℃ < -25 GB/T 510-83 Decomposition Temp., ℃ > 200 Solubility freely soluble in water eye survey pH value PH=4.0-7.0 PH meter

【Storage & Packaging】 This product is packed in 200L iron drums. This product shall be stored in a shady, cool, ventilated, dry warehouse. The shelf life is 2 years. 【Precautions】 The product is non-flamable, non-explosive and non-toxic.

14 Refinery Additives: Sweetening Activator

Sweetening Activator

【Product Name】 Product Name: Sweetening Activator

【Application】

Products of the sweetening activator series are used to remove the thioalcohol from the alkali- free deodorization of catalytic gasoline. It has the properties such as easy infusion, high deprivation rate of low-molecular thioalcohol as well as high-grade thioalcohol. The total deprivation rate is about 90-95%. The products can also relieve the problem of oil-vapor corrosion.

【Quality Index】

No. Item Standard indicators A B 1 Outer appearance Light-yellow to redbrown liquid 2 Active-constituent Content % （ ≥ 8.0 m/m ） 3 Chloride ion % ＜ 0.5 4 Density 20 ℃ g/cm 3 0.80~0.95 0.90~1.00

【Storage & Packaging】

This product is packed in plastic barrels. The net weight is 170kg /barrel. This product shall be stored in well ventilated, dry, shady, cool warehouses. The shelf life is 2 years.

15 Refinery Additives: Neutralizing Corrosion Inhibitor

Neutralizing Corrosion Inhibitor

【Product Name】

Product Name: neutralizing corrosion inhibitor

【Application】

The neutralizing corrosion inhibitor is made by compounding the film-forming agent and the neutralizing agent. It has both functions of neutralization and film forming, and is widely used by refineries in the condensing and cooling system on the fractioning tower top for effectively preventing the dew point corrosion at phase-transition positions so as to extend the service life of the equipment and ensure a long-period safe operation of the production facilities.

【Quality Index】

No. Item Standard indicators A B 1 Outer appearance Colorless to light mauve 2 Density 20 ℃ g/cm 3 0.95~1.05 3 Solubility Mutually soluble with water 4 Neutralizer Content % 30~35 50~55 5 Corrosion-mitigation rate % ≥ 97

【Storage & Packaging】 This product is packed in plastic barrels with a net weight of 180 kg /barrel. This product shall be stored in well ventilated, dry, shady, cool warehouses. The shelf life is 2 years.

16 Refinery Additives: Antifouling Agent (Scale Inhibitor)

Antifouling Agent for Heat Exchangers of Hydrotreating Feedstock

【Product Name】 Product Name: Antifouling Agent (Scale Inhibitor) for Heat Exchangers of Hydrotreating Feedstock 【Quality Index】 1、Outer appearance Brownish red liquid 2、Density 20℃ g/cm3 0.87-0.95 3、Kinematic viscosity 50℃ mm2/S ≤ 50 4、Freezing point ℃ ≤ -30 【Application】 This product prevents coking and scale-forming in the feedstock heat exchangers of gasoline and diesel hydrotreating units, improves the heat-transfer effect of the heat exchangers, and hence prolong the working cycle of the processing units. 【Recommended Dosage】 The recommended dosage is usually 50-150ppm. It will present better effects if used in clean pipelines when the Hydrotreating Unit is put in use for the first time. 【Storage & Package】 This product shall be stored in a shady, cool, ventilated, dry warehouse. The shelf life is 2 years. This product is packed in galvanized iron drums of net weight 170kg each. 【Precautions】 This product is flammable, therefore, shall be kept far away form open flame.

17 Refinery Additives: Defoaming Agent for Delayed Coking Unit

Defoaming Agent for Delayed Coking Unit

【Product Name】 Product Name: Defoaming Agent for Delayed Coking Unit 【Quality Index】 1、Outer appearance light-yellow liquid 2、Density 25℃ g/cm3 ≥0.83 3、Kinematic viscosity 25℃ mm2/S ＜ 150 4、Freezing point ℃ ≤ -30 5、Solubility Inter-soluble with diesel oil 6、Flash point (closed) ℃ ≥60 7、Effective constituent % ≥25 【Application】 This product is used in delayed coking units to inhibit the foaming in the coking tower during the coke-formation process, lower the foam height, improve the utilization rate of the coking tower and add to the processing capacity of the delayed coking unit. 【Recommended Dosage】 30~100ppm in proportion to the feedstock being processed. 【Storage & Package】 This product shall be stored in a shady, cool, ventilated, dry warehouse. The shelf life is 2 years. This product is packed in galvanized iron drums of net weight 170kg each. 【Precautions】 This product is flammable, therefore, shall be kept far away form open flame.

18 Refenery Addives: Decoking Agent for Delayed Coking Units

Special Decoking Agent for Delayed Coking Units

【Product Name】 Product Name: Special Decoking Agent for Delayed Coking Units 【Quality Index】 1、Outer appearance Brownish red liquid 2、Density 25℃ g/cm3 0.87-0.97 3、Kinematic viscosity 50℃ mm2/S ≤ 50 4、Freezing point ℃ ≤ -20 5、Solubility Inter-soluble with diesel oil 【Application】 This product is used in delayed coking units to prevent coke & scale formation, strip the coke scale off the pipe walls of the equipment, improve the heat-transfer coefficient of the heat exchanger and the heater, reduce the energy consumption, extend the working cycle of the units, and hence add to the economic benefits. 【Recommended Dosage】 Usually 50-150 ppm in proportion to the amount of the feedstock being processed 【Storage & Packaging】 This product shall be stored in a shady, cool, ventilated, dry warehouse. The shelf life is 2 years. This product is packed in galvanized iron drums of net weight 170kg each. 【Precautions】 This product is flammable, therefore, shall be kept far away form open flame.

19 Refinery Additive: Sulfonated Cobalt Phthalocyanine Catalyst

Sulfonated Cobalt Phthalocyanine Catalyst

【Product Name】 Product Name: Sulfonated Cobalt Phthalocyanine Catalyst 【Molecular and Structural Formula】

Molecular Formula: Co(C32H16N8O6S2) 【Quality Index】 Appearance: Dark blue powder Odor: Odorless Relative Density 25℃ kg/L 1.05-1.1 Water-solubility: difficult; alkali soluble Flamability: difficult; flammable in the air at 250℃ or higher Stability: stable at normal temperature and pressure Residue on Sieve (0.2mm): ≤ 15% Cobalt content (dry base) ≥ 6.0% Sweetening activity: mercaptan sulfur from 100*10-6 to below 10*10-6 【Application】 Mainly used in the sweetening of light oil products. 【Recommended Dosage】 Dissolve the catayst in 10% alkali solution. 1 kg catalyst sweetens more than 20,000 MT light oil products. If using active carbon or molecular sieve as carrier in a fixed bed process, 1 kg catalyst sweetens 65,000 MT light oil products. 【Storage & Packaging】 This product is packed in 2 kg plastic bottles. Avoid violent collision during transportation. Avoid direct sunlight and rain. It absorbs moisture easily, and must be stored in a well ventilated dry warehouse.. 【Precautions】 Do not mix with strong oxidants to prevent combustion.

20 Refinery Additives: Polyphthalocyanine Cobalt Catalyst

Polyphthalocyanine Cobalt Catalyst

【Product Name】 Product Name: Polyphthalocyanine Cobalt Catalyst 【Molecular and Structural Formula】

Molecular Formula: ﹝CoC32H8N8O8﹞nC4H2O8 【Quality Index】 Appearance: Dark blue powder Odor: Odorless Relative Density 25℃ kg/L 0.50-0.60 Water-solubility: difficult; alkali soluble Flamability: difficult; flammable in the air at 250℃ or higher Stability: stable at normal temperature and pressure Cobalt content (dry base) ≥ 5.5% Sweetening activity: mercaptan sulfur from 100*10-6 to below 10*10-6 【Application】 Mainly used in the sweetening of light oil products. 【Recommended Dosage】 Dissolve the catayst in 10% alkali solution. 1 kg catalyst sweetens more than 20,000 MT light oil products. If using active carbon or molecular sieve as carrier in a fixed bed process, 1 kg catalyst sweetens 65,000 MT light oil products. 【Storage & Packaging】 This product is packed in 1kg plastic bottles. Avoid violent collision during transportation. Avoid direct sunlight and rain. It absorbs moisture easily, and must be stored in a well ventilated dry warehouse.. 【Precautions】 Do not mix with strong oxidants to prevent combustion.

21 Chemical Addtives Chemical Addtives: yellow oil inhibitor

Antifoulant for Caustic Washing System (Yellow Oil Inhibitor)

【Product Name】 Product Name: Antifoulant for Caustic Washing System (yellow oil inhibitor) 【Formula and Structure type】 It is mixture, so there is not formula or structure type, it only contains C, H, O and N elements, non-halogen or heavy metals 【Performance】 The performance of additive mainly contains two parts: (1) the additive contains the polymerization inhibitors chemical components, they can eliminate the oxygen dissolved in the solution, passivate the metal ions , reduce the free radicals, suspend the chain growth of the polymerization (2) the additive contains the cleaning-dispersing chemical components, they can disperse the yellow oil(polymer),clean the surface of the device, improve the effect of the gas caustic washing 【Quality Index】 The additive is colorless or yellow liquid; it is stable, alkaline, and irritant to the human body. Amine number， KOH mg/g ≥100 Density， 20℃ ，g/cm3 0.950 ~ 1.150 Freezing point， ℃， ≤-20 Flash Point(close mouth cup, ℃) ＞62 【Application】 The additive is used for polymerization inhibitor or anti-fouling in the cracked gas caustic washing system of ethylene cracking plant 【Recommended Dosage】 The injection amount of the additive is 20-50μg/g,based on the total flow of the three olefins of the cracked gas, here the three olefins are ethylene, propylene and butadiene. 【Storage & Packaging】 Storage: It is inflammable, micro-toxic, should be away from fire or heat sources when storage Package: plastic barrels. Net weight: 200kg. 【Precautions】 (1) the injection point of the additive is depending on the process, makes the additive fully mix into the water solution. (2) the additive should be uniformly injected into the water solution by metering pumps, it can be diluted depending on the requirements.

22 Chemical Additives: Coking Inhibitor

Coking Inhibitor

【Product Name】 Product name: coking inhibitor 【Performance Features】 The product is fully decomposed at 600℃, part of it results into intermediate product HS free radical which will react with metal surface of furnace tube to give metal sulfides, passivate the metal surface, reduce the catalytic activity on furnace tube surface, and inhibit coking from heterogeneous catalysis; the other part of it changes the reaction process of free radical and product distribution, and inhibit coking from homogeneous catalysis. 【Quality Index】 Item Specification Appearance Clear transparent liquid

3 Density（20℃）， g/cm 0.93～1.03 Viscosity（25℃）， mPa·s <12 Flashpoint(℃) >15 Purity of active organic sulfur， % ≥96 【Application】 It is mainly used for coking inhibition in ethylene cracking furnace (gaseous), with functions of extending the running period of cracking furnace, delaying the wear of furnace tube, and reducing the generation of CO effectively. 【Recommended Dosage】 Reference usage：yearly consumption of 36 tons for 20T/h cracking furnace. 【Storage & Packaging】 Blue steel drum，net weight 200 Kgs per drum, stored in dedicated cool, dry and well- ventilated warehouse. 【Precautions】 It is alkaline, please avoid direct contact with skin and wear protective clothes, gloves and glasses during handling.

23 Chemical Additves: Polymerization inhibitor

Polymerization Inhibitor

【Product Name】 Product name: Polymerization inhibitor

【Quality Index】 In accordance with the Manufacturer’s Standard Item Value Appearance tangerine liquid Viscosity (mPa·s,20℃) 1.00 ~ 5.50 Flash point (℃) ≥50

【Application】 It is a new kind of Polymerization inhibitor for the extraction system of butadiene, with the features of inhibition, antioxidation, metal deactivation and scale dispersion.

【Recommended Dosage】 Reference usage：yearly consumption of 36 tons for 20T/h cracking furnace.

【Storage & Packaging】 25KG square plastic drum or 180kg metal pail

【Precautions】 It is normal chemicals, avoid the fire. If it is contact with skin, pleas wash it with soap.

24 Chemical Additives: 4-ter-Butylcatechol

4-tert-Butylcatechol

【Product Name】 Product Name：4-tert-Butylcatechol 【Molecular and Structural Formula】 Molecular Formula: C10H14O2 Structural formula：

【Quality Index】

Description Specification Test Method Appearance white or light yellow crystals Visual test with eyes Purity (Content %)  99% Manufacturer’s Standard Melting point °C≥ 53 GB617 Ash Content %  0.2 GB9741 【Application】 This product can be used as a high efficiency polymerization inhibitor, especially applicable to styrene, butadiene, chlorobutadiene, isoprene, and vinyl chloride monomer. In addition, this product can be used as antioxidant for many polymers and/or compounds such as PE, PP, polychlorobutadiene, nylon, synthetic rubber, and oils and their derivants, ethyl cellulose, lubricants and metal soap etc. This product also can be used as the passivators for carbamate catalyzers, and used as stabilizer for various organic conpounds. 【Recommended Dosage】

Monomer Reference Monomer Reference dosage（PPM） dosage（PPM） styrene 1-400 Vinyl chloride 10-500

butadiene 25-200 α-methyl styrene 1-100

vinyltoluene 10-50 acrylonitrile 10-100

divinylbenzene 1000-2000 chlorobutadiene 25-200

C4 10-100 unsaturated polyester resin 50-400

【Storage & Packaging】 The product is packed in cardboard drum, 40kg per barrel. It shall be protected from impact, fire, direct sunshine and rain during the transportation. The product shall be stored in dry storage with ventilation. The product shall be away from heat source and kindling.

25 Chemical Additives: Cobalt Acetate

Cobalt Acetate

【Product Name】 Product Name：Cobalt Acetate 【Molecular and Structural Formula】

Molecular Formula: Co(CH3COO)2•4H2O Molecular Weight:249.08 【Property Features】 Purple crystal, easy to deliquesce, soluble in water, dilute acid. At 140 celcius, lost of 4 molecules crystalline water, specific gravity 1.703.

【Quality Index】 Content of Cobalt acetate % 97 - 99 Water insoluble matter % ≤ 0.02 2- Sulfate (SO4 ) % ≤ 0.01 Chloride (Cl-) % ≤ 0.002 - Nitrate（NO3 ） % ≤ 0.05 Content of Iron(Fe) % ≤ 0.001 Content of Copper（Cu） % 0.001 ≤ Content of Nickel（Ni） % 0.08 ≤ Alkali metal and alkaline-earth metal % ≤ 0.30

【Application】 It is used as oxidization catalyst for PTA/PET, paint drier, porcelain dyestuff and foam stabilizer and analyzing reagent, etc.

【Storage & Packaging】 20/25 kgs net weight per drum. To be stored in a well ventilated cool warehouse. Avoid direct sunlight.

26 Chemical Additives: Manganese Acetate

Manganese Acetate

【Product Name】 Product Name：Manganese Acetate 【Molecular and Structural Formula】

Molecular Formula: Mn(CH3COO)2•4H2O Molecular Weight：245.10 【Property Features】 Light red crystal, soluble in water and alcohol.

【Quality Index】 Content of Manganese acetate % 97 - 99 Water insoluble matter % ≤ 0.01 2- Sulfate (SO4 ) % ≤ 0.02 Chloride (Cl-) % ≤ 0.002 Content of Iron(Fe) % ≤ 0.001 Content of Copper（Cu） % ≤ 0.001 Content of Nickel（Ni） % 0.08 ≤ Alkali metal and alkaline-earth metal % ≤ 0.30

【Application】 It is used as oxidization catalyst for Terephthalic Acid (TPA) and glacial acetic acid, paint drier, fertilizer, etc.

【Storage & Packaging】 25 kgs net weight per drum. To be stored in a well ventilated cool warehouse. Avoid direct sunlight.

27 Chemical Additives: Animony Triacetate

Antimony Triacetate

【Product Name】 Product Name：Antimony Triacetate 【Molecular and Structural Formula】

Molecular Formula: Sb(CH3OO)3 Molecular Weight：298.89 【Property Features】 White or gray powder, easy to solve in glycol, toluene and xylene and easy to resolve when meeting damp..

【Quality Index】 Content of Antimony (Sb) % 40 - 42 Chloride (Cl-) % ≤ 0.002 Content of Iron(Fe) % ≤ 0.002 Content of Toluene % ≤ 0.2 Solubility (20 celcius in glycol) Colorless and transparent

【Application】 Catalyst for poly-condensation of polyester.

【Storage & Packaging】 12.5 kgs net weight per drum.

28 Chemical Additives: Animony Tris-ethylene glycol

Antimony Tris-ethylene glycol

【Product Name】 Product Name：Antimony Tris-ethylene glycol 【Molecular and Structural Formula】

Molecular Formula: Sb(C2H4O2)3 Structural formula：423.66 【Property Features】 White crystal, colorless and non-toxic, easy to deliquesce in damp air.

【Quality Index】 Content of Antimony (Sb) % 56.0-58.5 Chloride (Cl-) % ≤ 0.01 Content of Iron (Fe) % ≤ 0.001 2- Content of Sulfate (SO4 ) % ≤ 0.01 Loss on drying % ≤ 1.0

【Application】 Catalyst for poly-condensation of polyester.

【Storage & Packaging】 15 kgs net weight per drum.

29 Chemical Additives: Calcium Hypochlorite Granular

Calcium Hypochlorite Granular

【Product Name】 Product Name：Calcium Hypochlorite Granular CAS Registry Number: 7778-54-3 PIN (UN/NA Number(s)): 1748 2880

【Molecular and Structural Formula】

Molecular Formula: Ca(OCl)2 Structural Formula: O-Cl-Ca-Cl-O

【Property Features】 Physical state: Crystalline granular Appearance: white Odor: strong chlorine like Molecular Weight: 142.9848 Melting Point: Decomposes at temperatures above 100 deg C Decomposition temperature: 175 deg C Specific Gravity/Density: 2.0 (water=1) Solubility in Water: 21.5g/100ml at 0 deg C; 23.4g/100ml at 40 deg C Solubility in Other Liquids: Not available. Calcium hypochlorite reacts with many organic materials.

【Quality Index】 Specification CAL-HYPO 65% CAL-HYPO 70% Available chlorine % 65.0min 70.0min Moisture % 5.5-10 5.5-10 Granular(14~50mesh)% 90min 93min Density g/ml 1.0-1.1 1.0-1.1 Insolubility % 5.0max 3.0max

CaCO3 % 3max 3max

Ca(OH)2 % 2max 2max

CaCL2 % 2max 2 max NaCL % 14-20 12-16

【Application】 Water-treatment agent; Bleaching Agent; Bactericide; Algaecide

【Storage & Packaging】 25kg, 40kg, or 50kg net in plastic drums lined with plastic bags. To keep away from humidity and direct sunlight, it should be properly sealed and stored under ambient temperature and good ventilation, also it should not be mixed up with organic, acid and reducing agent. 30 Chemical Additives: Etherification Resin Catalyst Etherification Resin Catalyst 【Product Name】 Product Name：Etherification Resin Catalyst 【Property Features】 The product has been developed for the production of chemicals including fuel additives, industrial solvents, such as for MTBE, ETBE and TAME through the action of butylenes hydration; for high-octane gasoline by methanol and iso-olefin from light gasoline through etherification reaction; for Tert-butylation phenol by isobutylene and phenol through alkylation reaction. Its novel catalysis outperforms any others in olefin conversion and catalyst lifetime. Physical form Opaque beads Ionic form as shipped Hydrogen Structure Polystyrene crosslinking with DVB

Functional group SO3H Concentration of acid sites [1] > 5.20 mmol/g >1.70mmol/ml Moisture holding capacity [1] 50 to58 % (H+ form) Shipping weight 750 to 850 g/L Specific Gravity 1150 to 1250 g/L Particle Size Particle size range (0.355 to 1.250mm)≥99% Uniformity coefficient < 1.4 Fine contents < 0.355 mm : 0.5 % max Coarse beads > 1.250 mm : 0.5 % max Maximum operating temperature 120℃ 【Application】

For MTBE by isobutylene in C4 raw material through etherification reaction content of isobutylene from C4 material 15~45% reaction pressure 0.5~1.0MPa methanol to isobutylene(unit: mol) 0.95 to 1.2 Reaction temperature 30~80℃ Airspeed 1~3 h-1 conversion of isobutylene ≥90% Selectivity ≥99% For TBA by isobutylene hydration

Content of isobutylene from C4 15~45% reaction pressure 1.0~2.0MPa Water to isobutylene (unit: mol) 15~25 Reaction temperature 70~90℃ Airspeed 1~5 h-1 conversion of isobutylene ≥40% Selectivity ≥99% For high-octane gasoline through gasoline etherification content of etherified olefin in gasoline ≥15％ reaction pressure 0.6~0.7MPa 31 methanol to isobutylene(unit: mol) 0.85～1.0 Reaction temperature 65~75℃ conversion of etherified olefin ≥60％

【Storage & Packaging】 Storage: avoiding water rain at the temperature 5-40 celcius, don’t pack column with dry ion exchange resin. Dry beads expands when wetted; this expansion can cause glass column to shatter. Packed 25 kg in plastic woven bags.

32 Chemical Additives: β-Mercaptoethanol β-Mercaptoethanol

【Product Name】 Product Name：β-Mercaptoethanol Chemical Name: Ethylene thioglycol; Thioglycol 2-Hydroxyethylmercaptane, MCE 【Molecular and Structural Formula】

Molecular Formula: C2H6OS Structural Formula: HSCH2CH2OH 【Property Features】 β-Mercaptoethanol is a colorless transparent liquid with a special smell. It is soluble in water, alcohol, aether, benzene and other organic solvents. It is hygroscopic in air, and not irritant. No cancers could be caused. Boiling point:158 C (9.9 X 104 pa, Flash point: 75 C, Melting point: -100 C, Density:(20C,g/cm3): 1.1143. Refractive index: ( ) 1.4996, Viscosity:(20 C) 3.43cp

【Quality Index】 Item Index Superior Grade First Grade General Grade Appearance Colorless liquid, no mechanical impurities Color(Pt－Co) 50 50 100 Purity(%) 99.2 98.50 98.00 H2O(%) 0.50 PH (50%V/V water solution) 3.0 Emulsion separated time, Sec 60

【Application】 The product can be used as chain extender in manufacturing of low- polymer PVC; As inhibitor for acrylo nitrile; As transfer agent for polymerization; As intermediate for production of corp protection agents and dyestuff; As textile auxiliaries and inhibitors for pickling baths. 【Storage & Packaging】 Packing Size: In 200kg or 220kg net plastic drum. Handle and carry with care, protect against heat and fire. Sealed and stored in cool, dry ventilative warehouse. keep away from Oxides (such as H2O2, H2SO4,other organic oxides) and sunlight .

33 Chemical Additives：Triethyl Aluminum Triethyl Aluminum

【Product Name】 Product Name: Triethyl Aluminum (TEAL) CAS No.: 97-93-8 【Quality Index】 Property Unit TEAL-Ⅰ TEAL-Ⅱ

Appearance Liquid Liquid Color Colorless Colorless Density 25 celcius 0.835 0.835 Boiling Point (760mmHg) 186.6 186.6 Melting Point celcius -52 -52 Viscosity (cP) (25 celcius) 2.58 2.58 Vapor Pressure (mmHg) (25 celcius) 0.025 0.025 Aluminum Content % 23.0 ≥22.8 Purity % ≥94.0 ≥94.0 Tri-n-propyl Aluminum % ≤0.7 ≤0.7 Tri-n-Butyl Aluminum % ≤6 ≤6 Tri-iso-Butyl Aluminum % ≤1.5 ≤1.5

Hydrides as ALH3 % ≤1.0 ≤0.1

【Application】 Co-catalyst for olefin polymerization.

【Storage & Packaging】 Store in accordance with local/national regulations. Keep away from food, drink and animal feedingstuffs. Keep under dry nitrogen containing less than 10 ppm oxygen. Protect product from moisture and wet air. Keep container tightly closed and in a well-ventilated place. Packed in C60/12 tank-type storage tank during transportation.

【Precautions】 Reacts violently with water. Spontaneously flammable in air, Causes burns. When using do not eat, drink or smoke. Handle in well ventilated areas. Eliminate all sources of ignition, and do not generate flames or sparks. Take precautionary measures against static discharges. Apply grounding when transferring from one container to another. Avoid contact with moisture and water. Keep under nitrogen. Handle only in closed system. During sampling, disconnecting lines or opening connections, an aluminised suit should be worn. Avoid contact with skin and eyes. Avoid Incompatible materials

34 Chemical Additives：Tetrabromoethane

Tetrabromoethane

【Product Name】 Product Name: Tetrabromoethane, 1,1,2,2-tetrabromoethane

【Molecular Formula】

Molecular Formula: C2H2Br4 Molecular weight: 345.67 【Quality Index】 Appearance Colorless or light yellow transparent liquid Saturation （APHA） ≤ 80 25 Relative density, d25 2.955 — 2.970 Freezing point,℃ -2 — 0 Content ,% ≥ 98.5 PH 5.0 — 7.0 Content of inorganic halide10-6 ≤ 15.0

【Application】 Used as catalyst accelerators for the PTA production; used for making quarternary ammonium salt compounds and burning rate accelerators in the organic synthesis industry; used as activators in the oxidation procedure for making terylene in the chemical fiber industry; used as inter-media in the coating industry; used as disinfectors and medicinal inter-media in the pharmaceutical industry; used as solvents of oils and waxes in the oil production industry; used as separators in the mining industry; used as fire extinguishing agents in the fire fighting industry; used as chemical reagents in the analytical chemistry; used as cleaning agents of microscopes and instruments.

【Storage & Packaging】 Net weight 150kg each barrel, the iron barrel lined with a plastic film. Stock in cool and ventilated places, keep out of moisture and sun. Shelf life: 12 months.

35 Chemical Additives：Hydrobromic Acid

Hydrobromic acid

【Product Name】 Product Name: Hydrobromic Acid

【Molecular Formula】 Molecular Formula: HBr Molecular weight: 80.91 【Quality Index】 Appearance Colorless clear liquid Content % w/w ≥47 Free bromine PPm w/w ≤50 Cl- PPm w/w ≤100 2- SO4 PPm w/w ≤100 Iodide PPm w/w ≤100 Iron PPm w/w ≤5 Heavy Metals PPm w/w ≤10

【Application】 As the catalyst in PTA production; other process where high purity hydrobomic acid is needed.

【Storage & Packaging】 300kg per drum or tanks. To be stored in a well ventilated warehouse. Avoid direct sun light.

36 Chemical Fiber Additives Chemical Fiber Additives: Titanium Dioxide

Titanium Dioxide - Titania

【Product Name】 Product Name: Titanium Dioxide, Titania 【Molecular Formula】

Molecular Formula： TiO2 【Quality Index】 Typical physical and mechanical properties of titania Density 4 gcm-3 Porosity 0% Modulus of Rupture 140MPa Compressive Strength 680MPa Poisson’s Ratio 0.27 Fracture Toughness 3.2 Mpa.m-1/2 Shear Modulus 90GPa Modulus of Elasticity 230GPa Microhardness (HV0.5) 880 Resistivity (25°C) 1012 ohm.cm Resistivity (700°C) 2.5x104 ohm.cm Dielectric Constant (1MHz) 85 Dissipation factor (1MHz) 5x10-4 Dielectric strength 4 kVmm-1 Thermal expansion (RT-1000°C) 9 x 10-6 Thermal Conductivity (25°C) 11.7 WmK-1

【Application】 Applications for sintered titania are limited by its relatively poor mechanical properties. It does however find a number of electrical uses in sensors and electrocatalysis. By far its most widely used application is as a pigment, where it is used in powder form, exploiting its optical properties.

37 Chemical Fiber Additives: Sodium Methyl Sulfonate

Sodium Methyl Sulfonate

【Product Name】 Product Name：Sodium Methyl Sulfonate 【Molecular Formula】

Molecular formula： CH2C(CH3)CH2SO3Na Molecular weight: 158.156 【Application】 1. As monomer of high efficiency polycarboxylic acids concrete water reducing agents; offer stable sulfonic acid groups. 2. It is mainly used as the third monomer to improve the dyeability, heat resistance,sense of touch and easily weaving of the polyacrylonitrile. Also it can be used on water treatment, paint additive, carbon pore creating and powdered paints. 【Quality Index】 Appearance white flaky crystal Melting point 270-280°C Solubility It is easily soluble in water,slightly soluble in alcohol and methylsulfoxide,but not soluble in other organic solvent. Water Solution: transparent Assay >99.50% Chlorides ≤0.035% Iron ≤0.4ppm Sodium sulfite ≤0.02% Moisture ≤0.5% Color ≤10

【Storage & Packaging】 1. Net weight: 20kg/bag 25kg/bag (kraft paper bag lined with PE), 170kg/bag or 500kg/flexible container 2. Avoid rain, dampness and sunlight in transporting. 3. Sttored in dry, cool place.

38 Plastic Additvives Plastic Additvives：Antioxidant 1010

Antioxidant 1010

【Product Name】 Product Name：Antioxidant 1010 Chemical name: Tetrakis[methylene(3,5-di-t-butyl-4-hydroxyhydrocinnamate)]methane CAS NO:6683-19-8 【Molecular and structural formula】 Molecular Formula: C73H108O12 【Performance Features】 Highly compatible with a wide range of organic substrates, Non-staining and non-discoloring Excellent resistance to extraction, Odorless and tasteless, Improvement of long-term stability Low volatility,Ease of compatibility with other stabilizers 【Quality Index】 Appearance White Crystal powder or granular Assay 98 % (MIN) Melting Point 110~125℃ MIN Ash Content 0.1% WT MAX Volatile 0.5% WT MAX percent transmission of solution 425 NM 97% MIN, 500 NM 98% MIN 【Application】 Antioxidant 1010 finds application in plastics, rubber, latex, varnishes, adhesives, TPR's and Hot Melts. In plastics, ntioxidant 1010 provides excellent antioxidant performance in Polyethylene, Polystyrene, Polyacetal, PVC, AS resin, Methacrylic resin, Polycarbonate, Polyester, and Polymethyl-pentene as well as many others. In rubbers, Antioxidant 1010 can be used in SBR, EPR, EPDM, Polybutadiene, Neoprene, Nitrile, Polyisoprene, and many other synthetic rubbers. 【Recommende Dosage】 Typical dosage is 0.02% - 0.50% by weight. The loading data and results are based on laboratory work (and field testing) under controlled conditions and do not necessarily indicate the result that the buyer or user will attain. For this reason we strongly recommend testing of your own system under the actual conditions of processing and end-use prior to full scale testing. The recommended loading concentrations in polyolefins range between 0.05% and 0.5% depending on substrate, processing conditions, and long-term stability requirements. Concentration levels of Antioxidant1010 in hot melt adhesives range from 0.2% to 1%, and in synthetic tackifier resins, Antioxidant 1010 concentrations range between 0.1% and 0.5%. Exact loading must be determined by compositions of the specific polymer system. 【Storage & Packaging】 Packing: the net weight is 25Kg. It is packed in Three-in-one compound bags.The inner layer is plastic film,and the outer is polypropylene braided lining kraft paper bags. 【Precautions】 Keep away from moisture and not to be handled together with toxic materials. 39 40 Plastic Additvives：Antioxidant 1076

Antioxidant 1076

【Product Name】 Product Name：Antioxidant 1076 Chemical name: Stearyl-3-(3',5'-di-t-butyl-4-hydroxyphenyl) propionate CAS NO: 2082-79-3

【Molecular and structural formula】

Molecular Formula: C35H62O3

【Quality Index】 Melting Point 50~55℃ Ash Content 0.01 max % Moisture content 0.2 max % Volatile Content 0.10% max Assay 99% min Appearance white crystalline granular or powder Light transmittance (10g/100ml toluene) 425nm 97% min, 500nm 98% min

【Application】 It’s widely applicable to polyethylene,poly propylene, polyoxymethylene, ABS resin,PS resin, PVC, engineering plastics, rubber and petroleum products for polymerization!

【Storage & Packaging】 Packing: the net weight is 25Kg.It is packed in Three-in-one compound bags.The inner layer is plastic film,and the outer is polypropylene braided lining kraft paper bags.

【Precautions】 Keep away from moisture and high temperature, not to be handled together with toxic materials.

41 Plastic Additvives：Antioxidant 168

Antioxidant 168

【Product Name】 Product Name：Antioxidant 168 Chemical name: Tris (2,4-di-tert-butylphenyl) phosphite CAS NO: 31570-04-4

【Molecular and structural formula】

Molecular Formula: C42H63O3P

【Performance Features】 Highly compatible with a wide range of organic substrates, Non-staining and non-discoloring Excellent resistance to extraction, Odorless and tasteless, Improvement of long-term stability Low volatility,Ease of compatibility with other stabilizers

【Quality Index】 Appearance White powder Assay 99.0% (MIN) Melting Point 184.8~186°Cmin Ash Content 0.15% Volatile 0.3% WT MAX acid number 0.5% WT MAX phosphorus content 5% WT MIN percent transmission of solution 425 NM 98% MIN, 500 NM 99.1% MIN 2,4-DI-TERT BUTYL PHENOL 0.3% WT MAX

【Application】 Antioxidant 168 is sterically hindered phenolic antioxidant, exhibiting its highly effective, non discoloring and low volatility character for organic substrates. As a stabilizer, it is recommended and protect organic substrates against thermo-oxidative degradation.it’s widely used for additives of Rubber or plastics.

【Storage & Packaging】 Packing: the net weight is 25Kg. It is packed in Three-in-one compound bags.The inner layer is plastic film, and the outer is polypropylene braided lining kraft paper bags.

【Precautions】 Keep away from moisture and not to be handled together with toxic materials.

42 Plastic Additives: Antioxidant BHT

Antioxidant BHT, 264 , T501

【Product Name】 Product Name：Antioxidant BHT, 264, T501 CAS:128-37-0

【Performance Features】 Antioxidant BHT(2,6-di-tert-butyl-4-methyl phenol), C15H24O, molecular weight 220.36, white crystals or crystalline powder; soluble in benzene, toluene, ethanol, acetone, carbon terachloride,and methanol;insoluble in water and 10% NaOH solution.Mainly used in animal and vegetable oil and fat, and oil-rich food,and for packaging materials for cosmetics and food.

【Quality Index】 Items Parameter Appearance white crystals or crystalline powder m.p.℃ 69.0-70.0 Water content, % ≤ 0.1 Incandesced residue ,% ≤ 0.01 Sulfate (as SO4), % ≤ 0.002 Heavy metal (as Pb), % ≤ 0.0004 As ,% ≤ 0.0001 Free cresol(as p-cresol) ,% ≤ 0.02 Grades: Food grade, technical grade and feed grade.

【Storage & Packaging】 kraft paper outside, plastic woven bag with plastic lining inner, with a net weight of 25kg, or load by 500kg plastic woven bag.

【Precautions】 Keep away from moisture and not to be handled together with toxic materials.

43 Plastic Additives: Calcium Stearate

Heavy Tar Stearic Acid Calcareous

【Product Name】 Product Name: Heavy tar stearic acid calcareous Chemistry name：Calcium Stearate 【Molecular and structural formula】

Molecular Formula: C36H70O4Ca Structural Formula: 【Performance Features】 The heavy granular products of CaSt is superior to the conventional powdered products with three remakable advantages: 1st. the lower dust pollution and therefore more in favour of enviormental protection, 2nd，the enhanced liquidity,3rd. the higher purity. 【Quality Index】 Factory Project Units Quality Index Appearance Size 2.2mm white or light yellow Visual crystalline particles Ca Content % 7.0±0.5 Free acid （ With stearic acid ≤1.0 Meter） % Heat Loss % ≤2 Melting ℃ 150-160 BulkDensity g/cm3 0.6±0.1 Ash % 9.0-10.5 【Application】 Used as the acids neutalizer in polyolefine and halogen obsorber in resin. Used as lubricant in the forming and extrusing molding process when added to the polyolefine, polyoacyl styrenics and rubber. Used as molding discharging agent when added to the the thermoplastic plastics, rubber and the thermosetting products. Also used as water proofing additive in water proof materials and flatting agent in oil paint. 【Recommended Dosage】 In polyolefine amount used 350ppm-1500ppm 【Storage & Packaging】 Store in cool, dry and well ventilated storehouse. Pay attention to moisture-proof. No stress and handle with care. 25kg(net weight) in paper-plastic laminated box or triple kraft paper packing bag. 【Precautions】 Use process enclosures and local exhaust ventilation to keep airborne levels below recommended exposure limits. A self cotained breathing appatatus shoud be used for operators to avoid inhalation and splash goggles to protect eyes. After contact with shin, wash immediatly with plenty of water. Use water spray, appropriate foam, carbon dioxide, dry chemical powder or sandy soil as extinguishing media when ignited. Intact package shoud be guaranteed when dipatched and should be kept in the whole tansportation. Packed or transported with oxidants is prohibited. Don’t exposed to the hot sun or the rain.

44 Plastic Additives: Zinc Stearate

Zinc Stearate

【Product name】 Product Name: Zinc stearat 【Molecular and structural formula】

Molecular Formula: C36H70O4Zn 【Performance Features】 The heavy granular products of ZnSt is superior to the conventional light powdered products with three remakable advantages: 1st. the lower dust pollution and therefore more in favour of enviormental protection, 2nd. the enhanced liquidity, 3ed. the higher purity. 【Quality Index】 Factory Project Units Quality Index Appearance Size 2.2mm white granules, powder Visual Zn Content % 10.4-11.4 Free acid（With stearic ≤1.0 acid Meter） % Heat Loss % ≤0.5 Melting ℃ 118-128 BulkDensity g/cm3 0.6±0.1 【Application】 The product is widely used as lubricant and separant in rubber product. Used as stablizer, lubricant, molding discharging agent and color medicianl powder n plastic processing, also used as flatting agent in oil paint. 【Recommended Dosage】 Mix this product with raw plastic by the proportion of 0.035-0.150 before the normal processing. 【Storage & Packaging】 Store in cool, dry and well ventilated storehouse. Pay attention to moisture-proof. No stress and handle with care. 25kg(net weight) in paper-plastic laminated box or triple kraft paper packing bag. 【Precautions】 Use process enclosures and local exhaust ventilation to keep airborne levels below recommended exposure limits. A self cotained breathing appatatus shoud be used for operators to avoid inhalation and splash goggles to protect eyes. After contact with shin, wash immediatly with plenty of water. Use water spray, appropriate foam, carbon dioxide, dry chemical powder or sandy soil as extinguishing media when ignited. Intact package shoud be guaranteed when dipatched and should be kept in the whole tansportation. Packed or transported with oxidants is prohibited. Don’t exposed to the hot sun or the rain.

45 Plastic Additives: Hydrated Magnesium Silicate

Hydrated Magnesium Silicate

【Product Name】 Product Name: hydrated magnesium silicate

【Performance Features】 Hydrated magnesium silicate atablilizer, also known as TA is a white flaky crystals of phosphorus, which is a high-plastic rheology additives openings. Hydrated magnesium silicate used as a polyethylene film major openings agent, agent. PP nucleating agent and is widely used in plastic industry. Its good dispersion can be a certain degree of miscibility resin, the resin added in a certain amount of hydrated magnesium silicate additives openings, and its resin did not affect the physical properties, easy processing and molding resin. Opening it as agent,agent, nucleating agent widely used in the plastics industry, in order to enhance the rigidity of plastic to improve its, the opening of. Hydrated magnesium silicate or the paint, ink production, the best fillers, it has not precipitated, non-degenerate, characterized by uniform light, which in the paint, ink production line is also a wide range of applications. Hydrated magnesium silicate produced by HSM-1 products, stable quality, excellent quality, to replace imported products are widely used in the Qilu, Yanshan, Daqing, Guangzhou and other major petrochemical ethylene plant, by users. HSM-hydrated magnesium silicate product physical and chemical properties of indicators:

【Quality Index】 SiO2 content(wt%) 58-61 MgO content(wt%) 29-32 firing agravity(wt%) 5-6.5 granularity 400-2500eye mesh whiteness ≥ 88

【Storage & Packaging】 Product Package: net weight of 20 ± 0.02Kg / bag, kraft paper bag lined with PE plastic bag.

46 Plastic Additives: Glyceryl Monostearate

Glyceryl Monostearate

【Product Name】 Product name：Glyceryl Monostearate 【Molecular and structural formula】

Molecular formula：C21H42O4 【Quality Index】

Item Unit Standard GMS-40LA GMS-45/3 GMS-60/3 GMS-90A Appearance By eyes White waxy solid Α-GMS content % ≥40 ≥45 ≥60 ≥90 Melting point ℃ 56-60 56-61 60-66 66-70 acidity mgKOH/g ≤3.0 ≤3.0 ≤3.0 ≤3.0 Iodine value gl2/100g ≤2.0 ≤2.0 ≤2.0 ≤2.0 ash % ≤0.15 ≤0.10 ≤0.10 ≤0.10 Ester value mgKOH/g 158-176 160-175 160-172 160-172 Iron content mg/kg ≤15 ≤10 ≤10 ≤10

【Application】 Widely used in the field of pelletizing and processing of polyolefin products. 【Recommended Dosage】 Reference dosage：400-1500 ppm 【Storage & Packaging】 Stored in cool, well ventilated dry warehouse. Avoid moisture or pile up under heavy weight. Handle with care. Packaged in cartons lined with plastic bags or in kraft bags, net weight 25kg each. 【Precautions】 Keep away from water, moisture and direct sunlight. Transportation should be done in early morning or late evening so as to avoid strong sunlight which may result in hardening of the product..

47 Plastic Additives: Erucamide

Erucamide

【Product Name】 Trade name：Erucamide Chemical Name：Cis-22 Carbon-acid amide 【Molecular and structural formula】 Molecular formula：C21H41CONH2

Structural formula：CH3(CH2)7CH=CH(CH2)11C=O-NH2 【Performance Features】 For the waxy solid, insoluble in water, In ketones, esters, alcohols, ether, benzene and other organic solvents have a certain solubility, Good compatibility with the resin, which has good mobility; with high melting point and good thermal stability. Is a non-toxic (FDA argument) No corrosion, multi-effect plastic printing ink, paint, paint, textile, paper, cosmetics and other chemical additives. 【Quality Index】 Item Standard Appearance Powder or small granules Amide Content % 98min Acid Value mgKOH/g 0.3max Iodine Value gI2/100g 72—78 Melting Point ℃ 79—86 Gardner Hazen 2max Water % 0.1max 【Application】 BOPP, CPP, LLDPE and other films’s best opening and anti-adhesion agent; Photographic light-sensitive material (coating) of the lubricant; Cigarette membrane lubricant; Table India (Composite) ink anti-sticking, anti-stick and Smoothness agent; Toner, paste lubricant and dispersing agent; Functional additive masterbatch essential for good; coatings and paint flow calm Run Shuang agent; And melting point of wax modified the regulation of agents, engineering plastics processing auxiliaries, textile softeners, lubricating oil additives, thermoplastic dip powder Smoothness, leveling agent. 【Recommended Dosage】 Reference dosage：1%—2% 【Storage & Packaging】 Products with compound bag, bag net weight 25kg, inappropriate storage and transportation of pollutants and toxic Yi, should be stored in a cool dry and ventilated place, storage period of six months.

48 Plastic Additives: Oleamide

Oleamide

【Product Name】 Product Name：Oleamide Chemical Name：9-Octadecenamide 【Molecular and structural Formula】 Molecular formula：C18H35NO

Structure type：CH3(CH2)7CH=CH(CH2)7C=O-NH2 【Performance Features】 No smell of waxy solids, molecules containing an unsaturated Jian (double-jian). Do not dissolve in water, ketones, esters, alcohols, ether, benzene and other organic solvents have a certain solubility, good compatibility with the resin. To heat, oxygen, UV stable, with a typical polar and non-polar molecular structure, can form a monolayer of material interface, with the opening of anti- adhesion, smooth, increase slip, leveling, waterproof, moisture, anti-settling, anti-pollution, antistatic, dispersion effects. It is a non-toxic (FDA argument) No corrosion, excellent performance of non-ionic surfactant. 【Quality Index】 Item Standard Appearance Powder or small granules Amide Content % 98min Acid Value mgKOH/g 1.0max Iodine Value gI2/100g 70—90 Melting Point ℃ 70—78 Gardner Hazen 4max Water % 0.1max 【Application】 This product is mainly used for LDPE film and its composite films, multi-layer co-extruded films, thin film, cast film, as well as the PP films smooth agent and opening agent; EVA, POM, PC, PET, PBT, PA and other plastic lubricants and de-film; PU surface treatment agent and fiber Masterbatch smoothness agent; Plastic ink and dip powder thermoplastic binder and leveling of anti-agents, smoothness agents; Toner, color paste, color masterbatch lubricant and dispersing agent; Functionality (opening and smoothness agent) Masterbatch essential for good additive; Also serves as a metal protection additives and polyolefin sheet of lubricant. 【Recommended Dosage】 Reference dosage：1%—2% 【Storage & Packaging】 Products with compound bag, bag net weight 25kg, inappropriate storage and transportation of pollutants and toxic Yi, should be stored in a cool dry and ventilated place, storage period of six months.

49 Ion Exchange Resins Gel and Macroporous Strong Base Anion Exchange Resins

Ionic Total Water Shipping Specific Reversible Color Remarks Form Exchange Retention Weight Density Swelling Capacity Min.(%) (g/ml) (g/ml) Max. (meq/ml) Gel-type Polystyrene Strong Base Anion Exchange Resins

201×2 Cl ≥0.75 72~80 0.65~0.70 1.01~1.07 Cl→OH Colorless With excellent kinetic 40% To Lightproperties. Mainly used in Yellow antibiotic extraction and organic acid adsorption. 201×4 Cl ≥1.25 50~56 0.65~0.72 Cl→OH International gel type 1.03~1.09 33% standard. With good kinetic 201×4FC Cl ≥1.20 50~56 0.63~0.72 properties and high working capacity. For demineralization and silica removal. Widely used in Pharmaceutical and Food industries. 201×7 Cl ≥1.35 42~48 0.67~0.73 1.06~1.10 Cl→OH Domestic gel type standard. 27% With high capacity and 201×7OH OH ≥1.15 53~58 0.66~0.71 1.05~1.09 good mechanical strength. 201×7FC Cl ≥1.35 42~48 0.67~0.73 FC for floating bed and SC 1.06~1.10 201×7SC Cl ≥1.30 42~48 0.66~0.71 for double-layer bed. The correspondent OH-type 201×7MB Cl ≥1.35 42~48 0.67~0.73 resins are also available. 202-II Cl ≥1.30 45~51 0.67~0.73 1.08~1.15 Cl→OH Type II gel anion resin. 25% Very high working capacity 202-IISC Cl ≥1.30 45~51 0.67~0.73 1.08~1.15 for demineralization. 74 Cl 0.66-0.73 1.04-1.10 Remove Fe Ion in ≥30% HCl Macroporous-type Polystyrene Strong Base Anion Exchange Resins

D201 Cl ≥1.15 53~58 0.65~0.73 1.03~1.10 Cl→OH Milky Excellent resistance to 20% WhiteTo physical breakage and D201OH OH ≥0.95 58~65 0.63~0.70 1.02~1.09 Light osmotic shock fracture. D201FC Cl ≥1.15 53~58 0.65~0.73 1.03~1.10 Yellow Good silica removal ability. D201MB Cl ≥1.15 53~58 0.65~0.73 1.03~1.10 Mainly used in demineralization. D202-II Cl ≥1.20 50~57 0.68~0.73 1.08~1.15 Cl→OH Macroporous type II anion 15% resins. Excellent resistance D202-IIFC Cl ≥1.20 50~57 0.68~0.73 1.08~1.15 to physical breakage, D202- OH ≥1.00 55~63 0.65~0.70 1.03~1.12 osmotic shock fractures. IIOH Very high working capacity 50 in deionization.

D296 Cl ≥1.10 50~60 0.65~0.75 1.05~1.10 Cl→OH Light High resistance to organic 20% Yellow fouling. Mainly used as organic scavenger. DOC2001 Cl ≥0.80 55~65 0.63~0.73 1.03~1.08 Cl→OH Milky Same as D296. Suitable for 20% White food processing. D208 Cl ≥0.55 78~85 0.60~0.70 1.04~1.08 Cl→OH Mainly used in separation 15% and purification of Heparin.

51 Ion Exchange Resins Ionic Total Water Shipping Specific ReversibleColor Remarks FormExchangeRetentionWeight Density Swelling Capacity (%) (g/ml) (g/ml) Max. Min. (meq/ml) Gel-type Polystyrene Strong Cation Exchange Resins 001×4 Na ≥1.40 52~58 0.75~0.80 1.18~1.25 Na→H Golden Mainly used in water softening, 10% to demineralization and antibiotic 001×4H H ≥1.25 58~65 0.72~0.78 1.10~1.20 Brown extraction 001×7 Na ≥1.90 45~50 0.78~0.85 1.25~1.29 Na→H Domestic gel type standard. 8~10% Suitable for softening and 001×7H H ≥1.80 51~56 0.73~0.80 1.17~1.25 demineralization. 001×7FC Na ≥1.90 45~50 0.78~0.85 1.25~1.29 For floating bed with high flow rate 001×7MBNa ≥1.90 45~50 0.78~0.83 1.25~1.29 With good mixture and separation properties with anion resins in mixed bed 001×8 Na ≥2.0 43~48 0.78~0.88 1.26~1.30 Na→H International gel type standard. 5~8% Suitable for softening and 001×8FC Na ≥2.0 43~48 0.78~0.88 1.26~1.30 demineralization. Used also in 001×8MBNa ≥2.0 43~48 0.78~0.88 1.26~1.30 amino acids and antibiotics. 001×10 Na ≥2.2 37~42 0.80~0.88 1.28~1.32 Na→H For water treatment and 3~5% Biochemical extraction. 001×10H H ≥2.0 43~59 0.78~0.83 1.22~1.28

001×16 Na ≥2.4 28~36 0.83~0.89 1.30~1.35 Mainly used in antibiotic extraction 66 Na ≥1.5 35~45 0.78~0.88 1.15~1.25 Partially sulphonated resin for softening. Significant saving in salt usage. 68 Na ≥1.9 45~50 0.78~0.88 1.25~1.29 Na→H Non-solvent cation resin. Very 10% low contamination. Especially suitable for drinking water treatment. 607 H ≥1.75 51-56 0.70-0.80 1.17-1.22 Yellow Particle Size(0.5-1.0mm)

Macroporous-type Polystyrene Strong Cation exchange resins D001 Na ≥1.8 45~50 0.78~0.85 1.25~1.28 Na→H Amber Very high resistance to oxidation, D001H H ≥1.7 50~55 0.75~0.80 1.16~1.24 5~8% to physical breakage, osmotic shock D001FC Na ≥1.8 45~50 0.78~0.85 1.25~1.28 Light fracture and organic fouling. D001MB Na ≥1.8 45~50 0.78~0.85 1.25~1.28 Brown Suitable for water and chemical treatment.

52 D-61 Na 1.80 45~55 0.75~0.85 1.25~1.28 With superior mechanical strength and excellent resistance to organic fouling, D-61, combined with D-92, is used in the recycling water treatment in glycol and methyl ethyl ketone production. D-65 H ≥2.0 45~55 0.75~0.85 1.18~1.26 Light Very high capacity. Mainly used Brown to convert Vc-Na into VC. D-67 D-67 Na ≥2.4 30~40 0.80~0.90 1.30~1.40 Na→H has higher capacity than D-65. 10%

53 Water treatment chemicals water treatment chemicals: Poly Aluminum Chloride

Polyaluminum Chloride

【Product Name】 Product Name: Polyaluminum Chloride 【Molecular and Structural Formula】 Molecular Formula: [AI2(OH)nCL6-n]m, in which n≤6 and m≤10 【Performance Features】 Water treatment cost is 20%-80% lower than that of other inorganic flocculants. It can cause quick formation of flocs, big flocs and rapid precipitation. It has a wide-rang adaptability for raw waters with different temperatures and a good solubility. The liquid product is suitable for automatic dosing, it is slightly corrosive, and convenient for operation. Furthermore, it will not block pipes over long-time usage. 【Quality Index】 Specifications:(GB15892-2003) Name Of Index Indices Ⅰ Ⅱ Liquid Solid Liquid Solid Excellent Class1 Excellent class1 AI2O3 % ≥ 10.0 10.0 30.0 28.0 10.0 27.0 Basicity 40～85 40～85 40～90 40～90 40～90 40～90 Relative Density (20℃)≥ 1.15 1.15 -- -- 1.15 -- Insoluble substance %≤ 0.1 0.3 0.3 1.0 0.5 1.5 PH ( 1% water solution) 3.5～5.0 3.5～5.0 3.5～5.0 3.5～5.0 3.5～5.0 3.5～5.0 Ammonia Nitrogen (N) %≤ 0.01 0.01 --- Arsenic (As) %≤ 0.0001 0.0002 Lead (Pb) %≤ 0.0005 0.001 Cadmium (Cd) %≤ 0.0001 0.0002 Mercury (Hg) % ≤ 0.00001 0.00001 +6 Chromium (Cr6+) %≤ 0.0005 0.0005 【Recommended Dosage】 1．The liquid product can be dosed directly or dosed after dilution. As for the solid product, dilution is necessary before being dosed. Normally, dilution proportion for the solid product is 2%- 30%,and for the liquid product,5%-50%(based on weight percentage). 2. The specific dosage is based on the flocculation tests and on the trials by the users. As a rule, the dosage of the liquid product is 2-40gram/ton,and of the solid product,1-20gram/ton. 【Precautions】 The product cannot be stored with other chemicals. We provide special tanks for transportation to the users .The solid product is packed in inner plastic bags and further in polypropylene woven bags , with each bag containing 25kg. The liquid product can be stored for one year and the solid product for two years.The product should be stored in a dry and ventilated place, but the effect will not be affected even if it gets wet.

54 Lubricant Additives Lubricant Additives: T151

T151, Mono-Succinimide

【Product Name】 Product Name: T151, Mono-Succinimide 【Quality Index】 Item Specification Test Method

Appearance Reddish brown By eyes transparent viscous liquid Kin. Viscosity at 100℃ , ≥220 GB/T265 mm2/s ASTMD-445 N content, wt% ≥2.0 SH/T0224 ASTMD-3228 Colour, lines ≤3.0 GB/T6540 GB/T6540 Flash Point(open),℃ ≥180 GB/T3536 ASTMD-92 Turbidity JTU ≤60 SH/T0028 LGA-JIU-1 T.B.N., mgKOH/g 45~60 SH/T0251 ASTMD-2896 Water, wt% ≤0.08 GB/T260 ASTMD-95 Mechanical impurities,% ≤0.08 GB/T511 DIN51592 【Application】 Used together with detergent additives, oxidation and corrosion inhibitors to produce high grade gasoline engine oil. It is also one of the major raw materials of fuel oil additives. 【Recommended Dosage】 For oils the reference additive levels should be in range of 1.5~4.0% 【Storage & Packaging】 The max temperature should be under 65℃ for storage,loading。If for long storage, we advise the temperature is less than 50℃ , Avoid water . Packing : 200liter iron drum ,NW: 170 kgs / barrel.. Quality guarantee: 24 Months

55 Lubricant Additives: T161

T161, High Molecular Weight Succinimide Ashless Dispersant

【Product Name】 Product Name: T161，High Molecular Weight Succinimide Ashless Dispersant

【Quality Index】 Item Specification Test Method

Appearance Reddish brown By eyes transparent viscous liquid Kin. Viscosity at 100℃ , mm2/s 300~500 GB/T265 ASTMD-445 T.B.N., mgKOH/g 15~30 SH/T0251 ASTMD-2896 N content, wt% 1.0~1.1 SH/T0224 ASTMD-3228 Colour, lines ≤3.5 GB/T6540 GB/T6540 Flash Point(open),℃ ≥180 GB/T3536 ASTMD-92 Water, wt% ≤0.08 GB/T260 ASTMD-95 Mechanical impurities,% ≤0.08 GB/T511 DIN51592

【Application】 Widely used in medium and high grade gasoline and diesel engine oils.

【Recommended Dosage】 For oils the reference additive levels should be in range of 1~5%

【Storage & Packaging】 The max temperature should be under 65℃ for storage, loading. If for long storage, we advise the temperature is less than 50℃ , Avoid water . Packing : 200liter iron drum ,NW: 170 kgs / barrel . Quality guarantee: 24 Months

T101 Lowbased petroleum calcium sulfonate

【Product Name】 Product Name: T101 Lowbased petroleum calcium sulfonate 【Quality Index】 Item Specification Test Method

Kin. Viscosity at 100℃ , mm2/s report GB/T265 ASTMD-445 Ca content，% 2.0～3.0 SH/T0297 ASTMD-4628 Density at 20℃ , g/cm3 0.90～1.00 GB/T2540 ASTMD-1298 Flash Point(open),℃ ≥180 GB/T3536 ASTMD-92 Turbidity JTU report SH/T0028 LGA-JIU-1 T.B.N., mgKOH/g 20~30 SH/T0251 ASTMD-2896 Water, wt% ≤0.08 GB/T260 ASTMD-95 Mechanical impurities,% ≤0.08 GB/T511 DIN51592

【Application】 Used for the production of marine lubricants, automobile lubricants and rust preventing oil.

【Recommended Dosage】 For oils the reference additive levels should be in range of 1.0~3.0%

【Storage & Packaging】 The max temperature should be under 65℃ for storage,loading。If for long storage, we advise the temperature is less than 50℃ , Avoid water . Packing : 200liter iron drum ,NW: 185kgs / barrel . Quality guarantee: 24 Months

T106 High Base Synthetic Calcium Sulfonate

【Product Name】 Product Name: T106 High Base Synthetic Calcium Sulfonate

Appearance Reddish brown By eyes transparent viscous liquid Kin. Viscosity at 100℃ , ≤200 GB/T265 mm2/s ASTMD-445 Ca content，% ≥11.5 SH/T0297 ASTMD-4628 Density at 20℃ , g/cm3 1.10～1.20 GB/T2540 ASTMD-1298 Flash Point(open),℃ ≥170 GB/T3536 ASTMD-92 Turbidity JTU ≤250 SH/T0028 LGA-JIU-1 T.B.N., mgKOH/g ≥300 SH/T0251 ASTMD-2896

【Application】 It is mainly used in high-grade internal-combustion engine oil and lubricating oils for heavy load diesel engines, especially for generators using high sulphur fuel.

【Storage & Packaging】 The max temperature should be under 65℃ for storage,loading。If for long storage, we advise the temperature is less than 50℃ , Avoid water . Packing : 200liter iron drum ,NW: 200 kgs / barrel . Quality guarantee: 24 Months

58 Lubricant Addtives: T803B

T803B, poly-α-Olefine

【Product Name】 Product Name: T803B，poly-α-Olefine

Appearance Orange liquid Visualization

Flash Point(open),℃ ≥135 GB/T3536 ASTMD-92 Effective Components，m% ≥35 RIPP-0034

Kin. Viscosity at 100℃ , ≤1500 GB/T265 mm2/s ASTMD-445 Ash content，% ≤0.1 GB/T508 ASTMD-482 Difference in p.p,℃ ≥18 GB/T510 ASTM D-97 Mechanical impurities, % ≤0.06 GB/T511 DIN51592

【Application】 Used in internal combustion engine oil, hydraulic oil, automotive oil and other lubricants with base oil of differenct paraffin wax content and Viscosity.

【Recommended Dosage】 For oils the reference additive levels should be in range of 0.1~1.0%, Normally, not greater than 1%

59 Lubricant Additives: S206

S206, Calcium Sulphurized Ackgl phenate

【Product Name】 Product Name: S206，Calcium Sulphurized Ackgl phenate

Kin. Viscosity at 100℃ , ≤300 GB/T265 mm2/s ASTMD-445 T.B.N., mgKOH/g ≥245 SH/T0251 ASTMD-2896 Flash Point(open),℃ ≥170 GB/T267 ASTMD-92 Mechanical impurities,% ≤0.1 GB/T511 DIN51592 Water, wt% ≤0.1 SH/T260 ASTMD-95 Ca content，wt% ≥9.0 SH/T0297 ASTMD-4628 S content, wt% 2.9～3.8 SH/T0303 IP-242

【Application】 S206 is mainly used in high-grade internal-combustion oil and marine oil of CC,CD grade and higher.

T202, Zinc Di-Alky Dithio phosphate

【Product Name】 Product Name: T202，Zinc Di-Alky Dithio phosphate 【Quality Index】 Item Specification Test Method

Appearance Clear Light yellow to By eyes amber Liquid density（20℃）g/ cm3 1.08~1.13 GB/T2540 ASTMD-1298 Kin. Viscosity at 100℃ , mm2/s report GB/T265 ASTMD-445 S content, wt% 14.0~18.0 SH/T0303 ASTMD-5815 P content, wt% 7.2~8.5 SH/T0296 ASTMD-4927 Zn content, wt% 8.5~10.0 SH/T0226 ASTMD-5815 Colour, lines ≤2.0 GB/T6540 GB/T6540 Flash Point(open),℃ ≥180 GB/T3536 ASTMD-92 Water, wt% ≤0.03 GB/T260 ASTMD-95 Mechanical impurities,% ≤0.07 GB/T511 DIN51592 decomposition temperature ℃ ≥220 SH/T0561 Bush weightlessness， mg ≤25 SH/T0264

【Application】 It can be used in industrial products such as internal-combustion engine oil and gear oil individually,or with kinds of additives such as detergent dispersant and anti-wear agent. 【Recommended Dosage】 For oils the reference additive levels should be in range of 0.5~3.0% 【Storage & Packaging】 The max temperature should be under 65℃ for storage,loading。If for long storage, we advise the temperature is less than 50℃ , Avoid water . Packing : 200liter iron drum ,NW: 200 kgs / barrel . Quality guarantee: 24 Months

T203, Zinc Di-I-octyl Dithio phosphate

【Product Name】 Product Name: T203，Zinc Di-I-octyl Dithio phosphate 【Quality Index】 Item Specification Test Method

Appearance Clear Light yellow to By eyes amber Liquid density（20℃）g/ cm3 1.06~1.15 GB/T2540 ASTMD-1298

Kin. Viscosity at 100℃ , mm2/s report GB/T265 ASTMD-445 S content, wt% 14.0~18.0 SH/T0303 ASTMD-5815 P content, wt% 7.5~8.8 SH/T0296 ASTMD-4927 Zn content, wt% 9.0~10.5 SH/T0226 ASTMD-5815 Colour, lines ≤2.0 GB/T6540 GB/T6540 Flash Point(open),℃ ≥180 GB/T3536 ASTMD-92 Water, wt% ≤0.03 GB/T260 ASTMD-95 Mechanical impurities,% ≤0.07 GB/T511 DIN51592 decomposition temperature ℃ ≥230 SH/T0561 Bush weightlessness， mg ≤25 SH/T0264

【Application】 Used for medium and high grade diesel engine oil.

【Storage & Packaging】 The max temperature should be under 65℃ for storage,loading。If for long storage, we advise the temperature is less than 50℃ , Avoid water. Packing : 200liter iron drum ,NW: 200 kgs / barrel . Quality guarantee: 24 Months

Benzene Ramification, Metal Deactivator T551

【Product Name】 Product Name: Benzene Ramification, Metal Deactivator T551

【Quality Index】 Item Quality Index Testing Method Appearance Brown transparent Eye measurement liquid Colorimetric No. Actual GB/T6540 measurement Density（20℃），kg/m3 910-1040 GB/T2540 Motion Viscosity 10-14 GB/T265 Flashing Point (Aperture) ℃ ≥130 GB/T3536 Base Number 210-230 Oxidization Test (Increment) (min) ≥90 Dissolvability % Acceptable Eye measurement Thermal Resolution Degree℃ Report

【Application】 It can form the inert protective foil on the metal surface or generate chelate complex to reject catalysis, especially combined with anti-oxygen additives. This product is generally used in machine oil, shaft-bearing oil, industrial gear oil, transformer oil and recycling oil, etc. With good thermal stability, T551 is a high performance multi-effective additive.

【Recommended Dosage】 Common Dosage should be in range of 0.01-0.05%.

【Storage & Packaging】 25/200kg net weight in Iron Drums. Shelf life: 1 year.

T746, Dodecylene Maleic Acid

【Product Name】 Product Name: T746，Dodecylene Maleic Acid

Appearance Transparent Sticky Liquid By eyes

density（20℃）g/ cm3 report GB/T2540 ASTM D - 1298

Kin. Viscosity at 100℃ , mm2/s report GB/T265 ASTMD-445 Flash Point(open),℃ ≥100 GB/T3536 ASTMD-92 PH Value ≥4.3 GB/T264

Copper Corrosion ≤1.0 GB/T5096 test(100℃ ,3h)grade ASTM D - 130 Liquid phase rust test: Synthetic Sea Water Rust-free GB/T11143 ASTM D - 665 Distilled Water

Test for film tenacity

【Application】 Anti-rust agent for hydraulic oil, steam turbine oil and industrial lubricating oil.

【Recommended Dosage】 For oils the reference additive levels should be in range of 0.03~ 1%

T152, Bis-Succinimide

【Product Name】 Product Name: T152，Bis-Succinimide 【Quality Index】 Item Specification Test Method

Appearance Reddish brown By eyes transparent viscous liquid Kin. Viscosity at 100℃ , ≤220 GB/T265 mm2/s ASTMD-445 N content, wt% 1.15~1.35 SH/T0224 ASTMD-3228 Colour, lines ≤4.0 GB/T6540 GB/T6540 Flash Point(open),℃ ≥180 GB/T3536 ASTMD-92 SDT ≥55 RIPP

T.B.N., mgKOH/g 15~30 SH/T0251 ASTMD-2896 Water, wt% ≤0.08 GB/T260 ASTMD-95 Mechanical impurities,% ≤0.08 GB/T511 DIN51592

【Application】 It can be used together with detergent, anti-oxidant and anti-corrosion agent. It can also be used in quenching oil and fuel.

【Storage & Packaging】 The max temperature should be under 65℃ for storage,loading。If for long storage, we advise the temperature is less than 50℃ , Avoid water . Packing : 200liter iron drum ,NW: 170kgs / barrel . Quality guarantee: 24 Months

T801, Alkyl Naphthalene

【Product Name】 Product Name: T801，Alkyl Naphthalene

Flash Point(open),℃ ≥180 GB/T3536 ASTMD-92 Chlorine content, % ≤2.0 IP - 224

Colour, lines ≤4.0 GB/T6540 GB/T6540 Kin. Viscosity at 100℃, mm2/s ≥100 GB/T265 ASTMD-445 Ash content，% ≤0.1 GB/T508 ASTMD-482 Water, wt% ≤0.03 GB/T260 ASTMD-95 Effective Components，m% ≥40 RIPP-0034

Difference in p.p,℃ ≥13 GB/T510 ASTM D-97

【Application】 Widely used in lube oil with paraffin wax content, or used as dewaxing aid.

【Recommended Dosage】 For oils the reference additive levels should be in range of 0.1~1.0%, Normally, not greater than 1%

66 Lubricant Additives: H4205, General Gear Oil Compound

H4205, General Gear Oil Compound

【Product Name】 Product Name: H4205, General Gear Oil Compound

【Quality Index】 Item Quality Index Actual Testing Method Measureme nt Data Motion viscosity，mm2/s 30~70 55.2 GB/T265 Flashing Point (Aperture) ℃ 90 134 GB/T3536 Density 0.90~1.2 1.0638 GB/T2540 Element content (m%)： Sulfur ≥ 25 31.06 ASTM D 5185 Phosphor ≥ 1.5 1.82 ASTM D5185 Nitrogen ≥ 0.5 0.92 ASTM D4629

【Application】 The latest type complexing agent for general gear oil developed by Research Institute of Petroleum Processing. 4.5% of the product can be added into paraffin base oil to prepare the vehicle gear oil of quality grade of GL-5 and viscosity level of 80W/90. The vehicle gear oil prepared has passed Anti-rust Test of Vehicle Gear Oil: CRC L-33, Load Carrying Capacity Test of Vehicle Gear Oil CRC L-37, Scratch Resistance Test of Vehicle Gear Oil CRC L-42 and Thermal Oxidization Stability Test of Vehicle Gear Oil L-60 etc. No.220 heavy load industrial gear oil prepared with 1.5% of H4205 conforms to USS-224. It can be used to prepare GL-5 vehicle gear oil with the following viscosity grades SAE90, 80W/90, 85W/90 and 85W/140. It can also be applied to the industrial gear oils with following viscosity grades N68, N100, N150, N220, N320 and N460. 【Recommended Dosage】 Spec Grade Recommendable adding volume (m %) Heavy duty vehicle gear oil GL-5 4.5 Medium load vehicle gear oil GL-4 2.25 Heavy load industrial gear oil 1.5 Normal duty industrial gear oil 1.0

【Storage & Packaging】 200kg net weight in galvanized iron drums.

67 Lubricant Additives: H5039, Antiwear Hydraulic Fluid Additive Package

H5039, Antiwear Hydraulic Fluid Additive Package

【Product Name】 Product Name: H5039, Antiwear Hydraulic Fluid Additive Package

【Quality Index】 Item Quality Actual Testing Method Index Measurement Data Density（20℃）g/cm3 1.0-1.1 1.06 GB/T2540 Motion viscosity,40 ℃ , mm2/s 25-40 30.45 GB/T265 Flashing Point (Aperture) ℃ ≥105 148 GB/T3536 Sulfur % 6.5-8.0 7.24 SH/T0303 Phosphor ≥ 3.0~4.0 3.21 SH/T0296

【Application】 It can be used to prepare high pressure ashless AW hydraulic oil of high grade with its addition amount of 0.6% to 0.8% (anti-foam agent be added additionally). It can be added into paraffin grade high viscosity neutral oil (HVIS and HVIW) to prepare products of N32, N46, N68 and N100 viscosity grades. Through the lab physical and chemical properties and high pressure pump rig test, its quality conforms to the national standard GB11118.1-94 L-HM: Quality Standard for Mineral Oil Type Excellent Hydraulic Fluid and reaches the requirements as specified in DENISON HF-0 specification of the United States, it is also in line with the requirements as specified in ISO11158-97, vickers m-2950-s DIN 51524(ll) as well as cincinnati milacron P-68P-69 P-70, attaining the advanced level of current international products of the same kind. Properties and purpose: as the product does not contain Zinc and other metals and has excellent high pressure EP/AW property and thermal oxidization stability, the AW hydraulic oil prepared with it mainly finds its use in the hydraulic system with over 30.0 Mpa at the plunger pump and 14.0 to 17.5Mpa pressure at the vane pump; it is an ideal motor transmission medium, extensively applied in metallurgy, plastic, mine and heavy duty engineering mechanical equipment such as in the hydraulic system of the truck loader, the excavator, the tilting car, the forming machine and the pressing machine. It can also extend its service life by reducing the mechanical wear of the hydraulic machinery and improve its economic benefits by lowering oil consumption and cost.

【Storage & Packaging】 200kg net weight in iron drums. The temperature shall not exceed 60 celcius during storage, loading, unloading and producing lubricants, and 45 celcius during long time storage. Avoid contact with water.

68 Lubricant Additives: Antiwear Additives 304；Dibutyl phosphite

T304, Antiwear Additive, Dibutyl phosphite

【Product Name】 Product Name: T304 Antiwear Additive, Dibutyl phosphite CAS No. 1809-19-4 【MolecularFormula】

Molecular Formula：(C4H9O)2POH Molucular Weight：194.0

【Quality Index】

Item Quality Index Testing Method Appearance Oily liquid in blank or light Eye measurement yellow Density 0.998 Boiling Point 95 Celcius Refraction N251.4228 Flash Point 120 F Solubility Organic solvent-soluble Water-insoluble Phosphor content: P% 14.5-16.0 SH/T0296 Acid number: mgKOH/g≤ 10 GB/T264 Sheet copper erosion grade 0-1 GB/T5096 (121℃, 3h)

【Application】 This product is the preferred EP/AW additive from novel phosphorus-containing compounds for lubrication oil with high EP/AW index and sound compatibility, which can be used to prepare vehicle gear oil and industrial gear oil, cutting oil and other kinds of oil of various grades. Its proposed level of addition shall be 0.3% to 1%. It is one of the major organic chemical materials which can be mixed with other additives to prepare compound oil additives and can also be used to compound oil flame retardant, pharmacy and perfume.

【Storage & Packaging】 20kg/200kg plastic barrel package

69 Fuel Oil Additives Fuel Oil Additives: Gasoline Stabilizing Additives

Gasoline Stabilizing Additives

【Product Name】 Product Name：Gasoline Stabilizing Additives 【Quality Index】 1、Appearance Orange yellow to brownish red liquid

2、Density 20℃ g/cm3 0.87-0.97 3、Kinematic viscosity 20℃ mm2/S ＜ 100 4、Freezing point ℃ ＜ -12

【Application】 The products can effectively improve the stability of gasoline and abate the formation of gums and asphaltines, and also have the effect of metal passivation, which will improve the induction period of gasoline. Further more, the products have overcome the drawbacks like contamination and precipitation of the simplex amine antioxidant itself due to the adverse effects of the atmosphere during usage and storage.

【Recommended Dosage】 Normally, the induction period of gasoline will increase 5~8 minutes when 1 ppm of additives is injected.

【Storage & Package】 This product shall be stored in a shady, cool, ventilated, dry warehouse. The shelf life is 2 years. This product is packed in galvanized iron drums of net weight 180kg each.

70 Fuel Oil Additives: Antistatic Agent ofr Gasoline and Diesel

Antistatic Agent for Gasoline and Diesel

【Product Name】 Product Name: Antistatic Agent for Gasoline and Diesel 【Quality Index】 1. Appearance: yellow or amber liquid 2. Density g/ml 0.82-0.96

3. Pour Point ℃ ＜ -30 4. Flash Point ℃ report 5. Viscosity cst 40℃ ≤200 【Application】 The product can effectively increase the conductivity of the fuel thus inhibit the buildup of static electricity and lower the risk of fire and explosion during the transportation and mixing of the gasoline and diesel product.

【Storage & Packaging】 Packed in 200 liter iron drums net weight 175kg each.

【Precautions】 The product is non-corrosive, non-toxic, non-flamable and non-explosive.

71 Fule Oil Additives: Antioxidant T501

Antioxidannt 2.6.4(Com.Grade)(T 501)

【Product Name】 Product Name: Antioxidannt 2.6.4(Com.Grade)(T 501) Chemical Name: 2,6-Di-tert-butyl-4-cresol Butylated Hydroxytoluene 【Molecular and Structural Formula】 Molecular Formula: C15H24O Structural Formula:

【Performance Features】 It is a white crystal, odorless, tastless and nontoxic, mp71°C, bp265°C. Insoluble in water and dilute alkalies, soluble in benzene, toluene, alcohol, gasoline and food oils. Its solubilities are: alcohol 25%(20°C), bean oil 30%(25°C), cotton seed oil 20%(25°C), lard oil 40%(40°C). 【Quality Index】 technical grade Food grade Appearance White crystal Melting point, °C 69.0-70.0 69-71 Moisture, %≤ 0.05 0.10 Incandescence Leavings %,≤ 0.01 0.10 Sulfates (based on SO4-2)%, ≤ 0.002 Heavy metals (based on Pb),%, ≤ 0.0004 Arsenic (As),%, ≤ 0.0001 Free phenols(based on p-cresol)%, ≤ 0.015 0.02 Relative Density Standard SH0015-90 GB1900-80 【Application】 As an food grade Antioxidant, it can delate the rancidity of the food.. It is also a stabilizer of synthetic rubbers (SBR, NBR, PU, BR), PE,and PVC. 【Recommended Dosage】 Dosage：0.3% in petrol or diesel, 0.012% in wax. 【Storage & Packaging】 Technical grade: composite bag(PPbag inside)25kg; Reagent grade& Food grade: composite bag(PE bag inside) 25kg.

72 Fuel Oil Additives: Diesel-Oil Cetane Number Improver

Diesel-Oil Cetane Number Improver

【Product Name】 Product Name: Diesel-Oil Cetane Number Improver

【Quality Index】 1、Outer appearance Color to light-yellow transparent liquid

2、Density 20℃ g/cm3 0.800-0.830 3、Kinematic viscosity 20℃ mm2/S ≤ 2.5 4、Freezing point ℃ ≤ -40 5、Water content % ≤ 0.05

6、Flash point ℃ Ambient temperature 7、Effective constituent % 83 ~ 85

【Application】 This product is to be added to commercial diesel oil for the purpose of improving its cetane number.

【Recommended Dosage】 Normally, adding 1‰ of this product in diesel oil will raise the cetane number by 1~5 units.

【Storage & Package】 This product shall be stored in a shady, cool, ventilated, dry warehouse. The shelf life is 2 years. This product is packed in plastic drums of net weight 150kg each.

【Precautions】 This product is flammable, therefore, shall be kept far away form open flame and heat sources.

73 Fuel Oil Additives: Diesel fuel flow improver

Diesel fuel flow improver

【Product Name】 Product Name: diesel fuel flow improver

【Performance Features】 This new-generation product diesel fuel flow improver,with its long-chained alkyl as well as polar groups, can increase the dissolving extent of normal hydrocarbon in diesel oil and shield waxy crystal, being an acidamide compound polymer polymerized from 3 monopolymers According to relevant tests, it has good receptivity in the diesel oil of 0#,-10#,-20#,-35#. When the level of addition is about 5/10000, it can decrase the freezing point by 5-30 °C, and cold filter plugging point by 2-10 °C.

【Quality Index】 1. Appearance: straw yellow liquid 2. Kinematical Viscosity (40℃)mm2/s: 30～80 3. Flash Point ℃: ≥40 4. Solidifying Point ℃: ≤20

【Storage & Packaging】 It is packed in 170Kg galvanized drums. Prevent from fire and direct sun light during storage.

74 Solvent

Solvent: P-DEB (Para-Di-ethyl Bezene)

P-DEB (Para-Di-ethyl Bezene)

【Product Name】 Product Name: P-DEB (Para-Di-ethyl Bezene) CAS No.：105-05-5

【Molecular and Structural Formula】 Molecular formula：C10H14，Molecular Weight：134.22

【Quality Index】

Item Unit Indices P-DEB Wt% ≥99.0 Other DEB Wt% 平衡

C8Aromatics Wt% ≤0.03

C9Aromatics Wt% ≤0.05 + Other C10 Wt% ≤0.3 Carbonyl No. Mg/l ≤1.0 Bromine Index mgBr/100g ≤5 Total Sulphur Ppm ≤1.0 Total Nitrogen Ppm ≤1.0 Total Chloride Ppm ≤1.0 Colour（Pt-Co） ≤10 Active Oxygen Ppm ≤1 As Ppb ≤1

【Storage & Packaging】 1. UN No.：2049 2. Barrel package( new zinc-plated iron barrel, sealed with pure Nitrogen) Net weight: 170kg/barrel; Gross Weight: 192kg/barrel. To be delivered with container. 3. Tank package (ISO container tank; sealed with pure Nitrogen) Dimension is equivalent to 20 feet container.Net Weight: 20 MT/tank; Gross weight: 25MT/tank, to be delivered to the customers’ directly with container tank.

75 Solvent: Sulfolane

Sulfolane

【Product Name】 Product Name: Sulfolane, Tetrahydrothiophene dioxide; CAS Number: 126-33-0 【Molecular and Structural Formula】

Chemical Formular: C4H8O2S, Molecular Weight： 120.17

Chemical Structure：

【Quality Index】 ITEMS UNIT TECHNICAL INDEX Density@30℃ kg/m3 1260-1270 5% Distill off temperature ℃ 282 Min 95% Distill off temperature ℃ 288 Max

Thermal stability mgSO2/kg 20 Max Moisture % 3.0 Max Sulfur content % 26.0-27.0 2-sulfolene % 0.2 Max Isopropyl sulfolane aether % 0.2 Max Assay % 99.5 Min.

Ash content % 0.1 Max

【Application】 Sulfolane is an organic solvent in multi-usage, which can be used in aromatic extraction, gas puritycation, medical intermediate,organic solvent in petrochemical industry, and addtives in rubber industry, as well as dyestuff intermediate,etc

【Storage & Packaging】 250kg / drum or according to customer’s request.

76 Adsorbent Adsorbent: Particulate Clay (Granule Clay)

High Efficiency Particulate Clay (Granule Clay)

【Product Name】 Product Name: high efficiency particulate clay (Granule Clay) Chemical Name: Calcium, sodium activity bentonite 【Molecular & Structural Formula】 Molecular Formula: （½Ca、Na）0.7（Al、Mg、Fe、）4（S i、Al）8O20（OH）4·nH2O The Ca, Na cation including is exchangeable. 【Performance Features】 This product has a moisture absorption, expansion, thixotropy, caking, thickening, stability, bleaching and strong cation exchange capacity, and has certain adsorption capacity to gas, liquid, and organic substances. The largest absorbed capacity up to 7-8 times on its own weight, surface active’s acid bleaching clay having Adsorption, permutation Features, have a good bleaching purification to the Pigment and animal or vegetable oil. 【Quality Index】 Item Index NC－01 NC－02 A B A B Convention Improved water al type resistance type Surface area， m2/g ≥ 200 200 220 200 220 Crushing strength，N/Each ≥ 0.50 0.60 0.50 5.0 5.0 Bromine index，mgBr/100gOil ≤ 5.0 5.0 5.0 5.0 5.0 Particle Below 300μm， % ≤ 5.0 5.0 5.0 - - size 1000～300μm， % ≥ 85.0 85.0 85.0 - - Diameter 1～1.4mm，% ≥ - - - 85.0 85.0 Length 2～8mm， % ≥ - - - 85.0 85.0 Free acid (by H2SO4），% ≤ 0.20 0.20 0.20 0.20 0.20 Bulk density， g/ML 0.6～0.9 0.6～0.9 0.6-0.9 0.6-0.9 0.6-0.9 Water-content % ≤ 5.0 3.0 5.0 5.0 5.0 Notes：1、NC－02 is renewable.2、Particle size and Water according to user’s requirements。【Application】 This product can be widely used in aromatics adsorbent device as catalytic, removing olefin in them. Being stable, and effect is great. After Improvement , applications in benzene hydrogenation device has being developed. This product has a high degree of bleaching power and activity, having better effect to the decolorization, dehydration, adsorption, and purification of aviation kerosene, gasoline, diesel oil, lubricating oil, solvents oil, and other petrochemical products. Also develop the application to removing nitrogen in extraction, the effect is better than similar products. 【Storage & Packaging】 The products should be stored in moistureproof, sun protection, anti-stress and ventilated, dry warehouse. Packaging NO1: 25 kg / bag , two layers plastic film bag inside, and woven bag outside; Packaging NO2: 850 kg /jumbo bag packaged. Can also be packed according to user’s requirements.

77 【Precautions】 This product is non-toxic solid particles, slightly acidic, and with a small amount of dust, but it’s without Pollution to the environment or to the water. Slight corrosion to the unit. Effect to the skin cause of subacidity, breathe in dusts will have little influence.

78 Adsorbent: Activated Clay

Activated Clay

【Product Name】 Product Name: activated clay Chemical Name: Calcium, sodium activity bentonite 【Molecular & Structural Formula】 (½Ca,Na)0.7(Al,Mg,Fe)4(S I,Al)8O20(OH)4·nH2O The Ca, Na cation including is exchangeable. 【Performance Features】 This product has a moisture absorption, expansion, thixotropy, caking, thickening, stability, bleaching and strong cation exchange capacity, and has certain adsorption capacity to gas, liquid, and organic substances. The largest absorbed capacity up to 7-8 times on its own weight, surface active’s acid bleaching clay having Adsorption, permutation Features, have a good bleaching purification to the Pigment and animal or vegetable oil. 【Quality Index】 Item BY—1020 BY—1040 BY—1060 Decolorization ability ≥150 ≥153 ≥154.5 Decolorization rate ≥80 ≥85 ≥90 Free acid (by H2SO4）% ≤0.2 ≤0.2 ≤0.2 Water-content % ≤12 ≤12 ≤12 Particle size (through 200 mesh)% Granularity (200 mesh) ≥95 ≥95 ≥95 Arsenic -content % ≤0.0005 ≤0.0005 ≤0.0005 【Application】 This product is rich of montmorillonite content of bentonite as raw material, inorganic acid treatment, rinsing, drying the adsorbent obtained, showing a white or pink powder, no mechanical impurities.The product is mainly used for grease industry (animal or vegetable oil refining bleaching), daily chemical industry (fancy soap) and petrochemical industry (including lubricating oil, paraffin, naphthene acid and etc.) and medicament industry. The quality of our products exceed the national standard, its performance is stable, strong bleaching (tons of oil to add less), filtration speed, and for different manufacturers of oil, adding suitable formula to achieve customer satisfaction results.

【Storage & Packaging】 To be stored in a moisture proof, well ventilated dry warehouse. Avoid direct sun light or pile up under heavy load. Packaged in woven sacks lined with double layer plastic bags net weight 25kg each, or jumbo gags 850kg each

【Precautions】 Non toxic particles with slight acidity and a little amount of fine dust. Non hazardous to the environment and does not cause polution to the water bodies. It will cause a slight corrossion to the plant. Avoid contact with skin or inhalation of the fine dust. 79 Oil Drilling Chemicals Oil Drilling Chemicals: Complex Ionic Acrylate

Complex ionic acrylate

【Product Name】 Trade name:Complex ionic acrylate（FA367）【Performance Features】 1.Performing as drilling Fluids Inhibitor and shale coating agent. 2.Improve the mud flow type, and reduce the coefficient of friction. 【Quality Index】 Item data Apparent viscosity (1% aqueous solution),mPa·s ≥30.0 Moisture, % ≤9.0 Granularity (sieve 0.9mm sieve residue), % ≤15.0 pH valaue 7.5 ~ 9.0 Water Apparent viscosity, mPa·s ≥25.0 solution Plastic viscosity, mPa·s ≥8.0 Filter Loss, ml ≤15.0 Complex Apparent viscosity, mPa·s ≥15.0 salt Plastic viscosity, mPa·s ≥10.0 solution Filter Loss, ml ≤10.0 Increasing rate of apparent viscosity in( Base paste ≤250.0 + Sample +20gBentonite) at 160 ℃, after hot rolling. % 【Application】 The product can inhibit the hydration, swelling and dispersion of shale stone effectively. It also can improve the flow type, reduce coefficient of friction. It can be used in mud under the circumstance of high solid concentration, high-density. 【Recommended dosage】 0.3~0.5%; 【Storage & Packaging】 The product should be stored in dry, ventilated warehouse, and avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product r is packed in complex paper bag outside and film plastic bag inside. The net weight of the product is 25Kg ± 0.25Kg. 【Precautions】 Spilled product in contact with water or moisture causes surfaces to become especially slippery. As a powder, it may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.

80 Oil Drilling Chemicals: Sulfonated Phenol-formaldehyde resin

Sulfonated phenol-formaldehyde resin

【Product Name】 Trade name：Sulfonated phenol-formaldehyde resin Chemical Name：Sulfomethylation phenolic resin 【Molecular & structural formula】

Formula [C8H8O2]n 【Performance Features】 Work as fluid loss control chemical under the circumstance of high temperature or in salt- bearing mud. Its capacity of high temperature-resistance reaches up to 200 ℃. 【Quality Index】 Items data dry powder ofⅠ-type dry powder of Ⅱ-type Appearance Free-flowing powder, Free-flowing powder, color color of 10% water of 10% water solution is solution is brown-red brown-red Content on dry basis, % ≥90.0 ≥90.0

Cloud point salinity, (as Cl- ≥110 ≥160 meter), g/L HTHP filtrate loss, mL ≤25.0 ≤35.0 Apparent viscosity, mPa.s ≤25.0 ≤50.0 【Application】 The product’s capacity of high temperature-resistance reaches up to 200 ℃. It can be applied widely in water-base mud in deep or ultra-deep well. It has the excellent performance of high temperature resistance, salt-resistance, mud cake improving. It functions well in high salinity and saturated brine drilling fluids system It can get a better result to be used with sulfonated lignite and sulfonated tannin. 【Recommended dosage】 Recommended amount： 3.0-5.0%. 【Storage & Packaging】 The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product is packed in complex paper bag outside and film plastic bag inside. The net weight of the product is 25Kg ± 0.25Kg. 【Precautions】 Spilled product in contact with water or moisture causes surfaces to become especially slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If

81 necessary, seeking medical advice.

82 Oil Drilling Chemicals: Ammonium Hydrolyzed Polyacrylonitrile

Ammonium Hydrolyzed Polyacrylonitrile

【Product Name】

Trade Name: Ammonium Hydrolyzed Polyacrylonitrile（NH4HPAN） Chemical Name: Ammonium Hydrolyzed Polyacrylonitrile 【Molecular & Structural Formula】

Molecular formula: (NH4HPAN)n 【Performance Features】 1. Work as water loss control chemical. 2. This product is easily dispersed in the drilling fluids and has the good compatibility with other mud chemicals. 3. This product also has a certain degree of calcium&salt-resistance capacity. 【Quality Index】 Physical and Chemical data Items data appearance Free-flowing powder Moisture , % ≤10.0 Screen remains, % ≤5.0 Content of Ammonium , % ≥7.0 Residual after burning , % ≤2.0 Mud properties Freshwater brine drilling fluids drilling fluids Base mud filtration loss，ml 22±2.0 60±5.0 Apparent 5~7 4~6 viscosity，mPa.s After adding Filter Loss，ml ≤12.0 ≤30.0 NH4HPAN Apparent ≤8.0 ≤8.0 viscosity，mPa.s 【Application】 The product is mainly applied in water-based mud as fluid loss additive and inhibitor. Also it has good capacity of calcium&salt-resistance. 【Recommended dosage】 Freshwater mud: 0.5%. Brine mud:.1.5% 【Storage & Packaging】 The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product r is packed in complex paper bag outside and film plastic bag inside. The net

83 weight of the product is 25Kg ± 0.25Kg. 【Precautions】 Spilled product in contact with water or moisture causes surfaces to become especially slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.

84 Oil Drilling Chemicals: Sodium Carboxymethyl Cellulose (LV)

Sodium Carboxymethyl Cellulose（LV）

【Product Name】 Trade Name: Sodium Carboxymethyl Cellulose（CMC-LV） Chemical Name: Sodium Carboxymethyl Cellulose 【Molecular formula】

Formula:C6H7O2（OH）3Na 【Performance Features】 1.Strong hygroscopicity, insoluble in water and form a viscous liquid. 2. Provide thin tough filter cake, and reduce fluid loss effectively. 3. Strong capacity of salt-resistance & calcium-resistance . 4. Very convenient to be applied, good compatibility with mud 【Quality Index】 Items Data CMC－LV appearance White or light yellow powder moisture，％ ≤ 10 purity ，％ ≥ 80.0 Degree of substitution ≥ 0.80 pH value 7.0～9.0 Filter Loss, ml ≤ 10.0 【Application】 The product is a kind of anionic polymers, mainly used to reduce fluid loss, and provide low viscosity. It also has the following characteristics: excellent capacities of salt-resistance and calcium-resistance, high efficiency of fluid loss reducing, and so on. 【Recommended dosage】 Recommended dosage: 0.2～0.5％。【Storage & Packaging】 The product should be stored in dry, ventilated warehouse, and avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product r is packed in complex paper bag outside and film plastic bag inside. The net weight of the product is 25Kg ± 0.25Kg. 【Precautions】 Spilled product in contact with water or moisture causes surfaces to become especially slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.

85 Oil Drilling Chemicals: Sodium Carboxymethyl Cellulose (CMC-HV)

Sodium Carboxymethyl Cellulose（CMC-HV）

【Product Name】 Trade Name: Sodium Carboxymethyl Cellulose（HV-CMC） Chemical Name: Sodium Carboxymethyl Cellulose 【Molecular & structural formula】

Molecular formula: C6H7O2（OH）3Na 【Performance Features】 1. Work as mud viscosifier.. 2. Good hygroscopicity, soluble in water to form viscous liquid. 3. Excellent capacity of salt-resistance and calcium-resistance. 4. Good compatibility with mud, and convenient to be applied.. 【Quality Index】 Items data HV－CMC appearance White or light yellow powder, M oisture，％ ≤ 10 P urity ，％ ≥ 85.0 Degree of substitution ≥ 0.80 pH value 6.5～8.0 Filter Loss, ml ≤ 10.0 Viscometer reading, plaint water 30 600r/min, ≥ 40g/dm3 Salt water Saturated brine 【Application】 Be used to increase the drilling fluid viscosity, alongside with good fluid loss reducing results. 【Recommended dosage】 0.1～0.3％。【Storage & Packaging】 The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product r is packed in complex paper bag outside and film plastic bag inside. The net weight of the product is 25Kg ± 0.25Kg. 【Precautions】 Spilled product in contact with water or moisture causes surfaces to become especially slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.

86 87 Oil Drilling Chemicals: Sulfonated Tannin

Sulfonated Tannin 【Product Name】 Trade name: Sulfonated tannin（SMT） Chemical name: Sulfomethylation gallic tannin sodium 【Molecular Formula and Structure Formula】

Formula Structure: C76H52O46 【Performance Features】 Work as a mud thinner. Appearance: brown, free-flowing powder or granules. Good hygroscopicity, dissolution in water quickly. 【Quality Index】 Test items data Moisture, % ≤10.0 Dry residuals water-insoluble, % ≤5.0 100rpm reading Under the condition of 24 ± 3 ℃ ≤10.0 viscosity, mPa·s Under the condition of 24 ± 3℃ after 180 ℃ 16h placing ≤12.0 in rolling oven Apparent 24 ± 3 ℃ ≤8.0 viscosity, mPa·s Under the condition of 50 ± 3 ℃ after 180 ℃ 16h placing ≤10.0 in rolling oven Yield point, Pa 24 ± 3 ℃ ≤2.0 Under the condition of 24 ± 3 ℃ after 180 ℃ 16h placing ≤2.0 in rolling oven 1min static shear 24 ± 3 ℃ ≤1.0 strength , Pa Under the condition of 24 ± 3 ℃ after 180 ℃ 16h placing ≤1.0 in rolling oven 【Application】 The products can be applied in the various types of water-based drilling fluids acting as an excellent thinner agent. It can also performance well in salt-water base drilling fluids and saturated brine drilling fluids as a thinner. It’s capacity of calcium-resistance reaches more than 1000mg/L. It also have an excellent thermal stability under the high temperature of 180-200 ℃ and provides mud good rheological properties. 【Recommended dosage】: 1.0% ～2.0%. 【Storage & Packaging】 The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product r is packed in complex paper bag outside and film plastic bag inside. The net weight of the product is 25Kg ± 0.25Kg. 【Precautions】 1. Spilled product in contact with water or moisture causes surfaces to become especially slippery. Take attention to prevent package damaging. 88 2. As a powder, it may be harmful to the skin, eyes, and respiratory system. 3. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.

89 Oil Drilling Chemicals: Sulfonated Lignite Sulfonated lignite 【Product Name】 Trade Name: Sulfonated lignite（SMC）【Performance Features】 1.Work as filtrate reducer, especially under the condition of hi-temperature. 2.Also work as a thinner. 【Quality Index】 Physical and chemical data Appearance Black-brown powder Moisture, % ≤15.0 Water-soluble dry humic acid content % ≥50.0

Chrome in dry base) % 0 Drilling Fluids Performance items data measured at Measured at 24 ± 3 ℃ 24 ± 3 ℃ after 180 ℃ 16h placing in rolling oven mud 100rpm reading viscosity, mPa·s 39-54 66-96 Apparent viscosity, mPa·s 12.5-17.5 20-26 mud+ Rate of viscosity reduction, % ≥75 ≥80 SMC Apparent viscosity, mPa·s ≤8 ≤10 1min gel strenth, Pa ≤1 ≤1 Filter Loss, ml ≤10 ≤11 【Application】 The product can resists the temperature of 200 ℃ ~ 220 ℃ . It can be added directly to water- base mud system through rig hopper. Normally it would be applied along with potassium humate, lignite resin and sulfonated phenol-formaldehyde resin. 【Recommended dosage】 :3-5%.(w/v) 【Storage & Packaging】 The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product is packed in complex paper bag outside and film plastic bag inside. The net weight of the product is 25Kg ± 0.25Kg. 【Precautions】 Spilled product in contact with water or moisture causes surfaces to become especially slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.

90 Oil Drilling Chemicals: Sulfonated Asphalt

Sulfonated Asphalt

【Product Name】 Trade Name Sulfonated Asphalt（FT-1） Chemical Name Sulfonated Asphalt 【Performance Features】 1. It can disperse in drilling fluids quickly. 2. Work as shale inhibitor. It can improve the mud cake, reduce the coefficient of friction and reduce the water loss.. 3. Has excellent capacity of hi-temperature and salt-resistance, and be compatable with other mud chemicals. 【Quality Index】 Items data pH value（1% aqueous solution） 8—9 sodium sulfonated content，% ≥ 10.0 Water-soluble substance content，% ≥ 70.0 Oil-soluble substance content，% ≥ 25.0 HTHP Filter Loss，ml/30min ≤ 25.0 the rate of apparent viscosity reducing，% ≥ 45.0 the rate of yield point，% ≥ 50.0 【Application】 It can be added directly into the drilling mud through rig hopper. It can fills and seals the pore throats and fractures in the formation besides the functions of lubricating and water loss control (especially the hi-temperature filtrate). 【Recommended dosage】 1.0～1.5%。【Storage & Packaging】 The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product r is packed in complex paper bag outside and film plastic bag inside. The net weight of the product is 25Kg ± 0.25Kg. 【Precautions】 Spilled product in contact with water or moisture causes surfaces to become especially slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.

91 Oil Drilling Chemicals: Potassium Polyacrylaamide

Potassium Polyacrylamide

【Product Name】 Product name: Polyacrylamide sylvite (KPAM) 【Performance Features】 1. Work as an excellent shale inhibitor or flocculant. 2. Also functions as water loss control agent, flow type improver and lubricant.. 3. Good capability of salt-resistance. 【Q u Items data alit y Appearance white or yellow free-flow powder Moisture, % ≤10.0 Purity, % ≥75.0 Remains content after screening, % ≤10.0 Degree of hydrolysis, % 27.0-35.0 Content of potassium, % ≥11.0 Content of Cl-, % ≤1.0 Intrinsic viscosity, 100ml/g ≥6.0

Index】

【Application】 The product can effectively coated cuttings and prevent mud making of formation. It can prevent sloughing and keep the well wall stable at the presence of cation Potassium. Also it is effective in mud water loss control and mud rheological properties. It has good compatability with other mud chemicals. And the product can be applied in dispersed mud system or non-dispersed mud system. 92 【Recommended dosage】 Freshwater mud: 0.2-0.5%; Saturated brine mud: 0.7-1.5%. 【Storage & Packaging】 The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product r is packed in complex paper bag outside and film plastic bag inside. The net weight of the product is 25Kg ± 0.25Kg. 【Precautions】 Spilled product in contact with water or moisture causes surfaces to become especially slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.

93 Oil Drilling Chemicals：Hydrolyzed Polyacrylonitrile Potassium

Hydrolyzed Polyacrylonitrile Potassium

【Product Name】 Trade Name: Hydrolyzed Polyacrylonitrile potassium (KHPAN) Chemical Name: Hydrolyzed Polyacrylonitrile potassium 【Molecular Formula and Structure Type】 Formula: (KHPAN) n 【Performance Features】 1．Soluble in water, and the solution is alkaline. 2．Work as shale inhibitor and well wall stabilizer. 3．Also be applied as water loss conditioner. 【Quality Index】 Appearance Free flowing powder Moisture, % ≤7.0 Content of Water-insoluble substance, % ≤5.0 Content of Potassium, % ≥20.0 Drilling fluids Performance Test Item In Freshwater In Brine drilling fluids drilling fluids Basic mud Filter Loss, ml 25±2.0 55±3.0 Apparent viscosity, mPa·s 6.0-8.0 4.0 -8.0 After adding K- Filter Loss, ml ≤15.0 ≤15.0 HPAN/H Apparent viscosity, mPa·s ≤10.0 ≤12.0 【Application】 The product acts as excellent shale inhibitor and water loss conditioner. It can be applied in varieties of anionic or zwitterionic polymer mud. It can prevents caving-in and reduces trouble and accidents in well-bore. 【Recommended dosage】 Fresh water mud: 0.5%. Salt water mud: 1.5%. 【Storage & Packaging】 The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product r is packed in complex paper bag outside and film plastic bag inside. The net weight of the product is 25Kg ± 0.25Kg. 【Precautions】 Spilled product in contact with water or moisture causes surfaces to become especially slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Washing with water after sink

94 contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.

95 Oil Drilling Chemicals: Hydrolyzed Polyacrylamide Powder

Hydrolyzed Polyacrylamide Powder

【Product name】 Merchandise name：Hydrolyzed Polyacrylamide powder (HPAM) Chemistry name：Hydrolyzed Polyacrylamide powder 【Molecular formula】

Molecular formula: (C3H5NO)n 【Performance Features】 1, Working as flocculant and shale inhibitor. Easily soluble in water. 2, Has the excellent capacity of hi-temperature-resistance, salt-resistance and excellent shearing& thinning properties. 【Quality index】 Item data Appearance The free-flow, white or yellow powder Fineness, 0.45mm sieve margin ， ≤10 % moisture，% ≤10 Purity ，% ≥90 The degree of hydrolysis，% 20-30 Intrinsic viscosity，mL/g ≥700 Residual monomer，% ≤0.5 【Application】 The product can prevent efficiently formation from hydrating, swelling and dispersing by coating or flocculating cuttings. Also it can improve mud flow type and reduce the coefficient of friction. 【Recommended dosage】 Fresh water mud: 0.2-0.5% Saturated salt mud: 0.5-1%. 【Storage & Packaging】 The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product r is packed in complex paper bag outside and film plastic bag inside. The net weight of the product is 25Kg ± 0.25Kg. 【Precautions】 Spilled product in contact with water or moisture causes surfaces to become especially slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Washing with water after skin contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical

96 advice.

97 Oil Drillig Chemicals: Barite Powder

Barite Powder

【Product Name】 Trade Name: Barite powder Chemical Name: Barium sulfate 【Molecular Formula and Structure】

Formula: BaSO4 【Performance Features】 1. High density and working as weighting material. 2. Strong chemically inert. 3. Acid and alkali-resistant,, low hardness. 【Quality Index】 items data First-class Secondary class Density , g/cm3 ≥ 4.20 4.00 Content of water-soluble alkaline-earth metal (base on 250 calcium )，mg/kg ≤ 75µm screen residual ,% (m/m) ≤ 3.0 Particles smaller than 6μm,% (m/m) ≤ 30 Viscosity, Before adding calcium sulfate ≤ 130 150 mPa·s after adding calcium sulfate ≤ 【Application】 Mainly be used as weighting material. 【Recommended Usage】 It can be added into drilling fluid through rig hopper as desired. 【Storage and Packing】 It should be stored in dry and ventilated warehouse. The guarantee period is 3 years. It should be packed in plastic woven bag. The net weight of each bag is 25Kg ± 0.25Kg. 【Precautions】 It may be harmful to eyes and respiratory system. It may cause people discomfort after inhalation. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.

98 Oil Drilling Chemicals: Sefstromite Powder

Sefstromite Powder

【Product Name】 Trade Name: Sefstromite powder 【Molecular Formula and Structure Type】 Structural formula: x (FeTiO3) :( 1-x) (V2O5) 【Performance Features】 1. High density, high acid-solubility and low content of alkaline-earth metal. 2. No radioactive element. 3. Not dissolvable in water, non-toxic and tasteless. 【Quality Index】 items data solubility in hydrochloride, % ＞ 75.0 Density, g/cm3 ＞ 4.50 Water-soluble alkaline-earth metal (base on calcium), mg/kg ≤ 300 200 mesh screen residuals , ≤ 3.0 325 mesh screen residuals , ≤ 5-20 Moisture, % ≤ 1.0 Viscosity, mPa·s Before adding calcium sulfate ≤ 125 After adding calcium sulfate ≤ 125 【Application】 Mainly be used as weighting material. It can be acidized to protect the pay-zone 【Recommended dosage】 It can be added into drilling fluid through rig hopper as desired. 【Storage and Packing】 It should be stored in dry and ventilated warehouse. The guarantee period is 3 years. It should be packed in plastic woven bag. The net weight of each bag is 25Kg ± 0.25Kg. 【Precautions】 It may be harmful to the skin, eyes and respiratory system. It may cause people discomfort after inhalation. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.

99 Oil Drilling Chemicals: Ilmenite Powder

Ilmenite Powder

【Product Name】 Trade Name: Ilmenite powder 【Molecular Formula and Structure Type】 Structural formula: FeTiO3 【Performance Features】 1. High density, high acid-solubility and low content of alkaline-earth metal. 2. Non-radioactive element. 3. Not dissolve in water, non-toxic and tasteless. 【Quality Index】 tems data solubility in hydrochloride, % ＞ 60.0 Density , g/cm3 ＞ 4.50 Fineness (125μm sieve residual percent) ,% ≤ 5.0 water content, % ≤ 1.5 Viscosity, mPa·s Before adding calcium sulfate, ≤ 125 After adding calcium sulfate, ≤ 125 【Application】 Mainly be used as weighting material. It can be acidized to protect the pay-zone 【Recommended dosage】 It can be added into drilling fluid through rig hopper as desired. 【Storage & Packaging】 It should be stored in dry and ventilated warehouse. The guarantee period is 3 years. It should be packed in plastic woven bag. The net weight of each bag is 25Kg ± 0.25Kg. 【Precautions】 It may be harmful to the skin, eyes and respiratory system. It may cause people discomfort after inhalation. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.

100 Oil Production Chemicals Oil Production Chemicals：Crude Oil Paraffin Inhibitors & Removers

Crude Oil Paraffin Inhibitors & Removers

【Product Name】 Product Name：Crude Oil Paraffin Inhibitor 【Performance Features】 Using chemical agent to inhibit the cristilization of paraffin wax. Paraffin Removers include oil-base, water-base and emulsion type paraffin removers. Paraffin Inhibitors include oil soluble surfactant, water soluble surfactant, and polymeric paraffin inhibitors. 【Quality Index】 Item Data Water base Oil base Appearance Uniform liquid Condensation point ℃ Lower than the lowest local temperature in winter solubility Water soluble Not water soluble pH Value 7.0～10.0 - Paraffin Inhibition rate ≥15% ≥20% Paraffin melting rate g/min - ≥0.025 Organic Chlorine content none none Carbon Disulfide Content none none 【Application】 I. Paraffin Remover 1. Oil-base paraffin remover: A mixture of compositional formulation by various organic solvents, mutual solvents and oil soluble surfactants. One of the widely used paraffin removers because of its good capability of dissolving paraffin and paraffin removing effect. 2. Water-base paraffin remover: water-base paraffin remover uses water as the dispersing media, mixed with surfactant, mutual solvents or alkaline materials. It changes the surface of the pipelines into a hydrophilic surface by moisturing which helps the paraffin wax to fall off and inhibit the re-deposition. As compared to oil-base paraffin removers, water-base paraffin removers represent the present direction of development since it is more safe and cause less polution to the environment, although a little less effective in paraffin removal. 3. Emulsion type paraffin remover: The product is an oil-water emulsion formed by emulsifying organic solvents and water with the existance of surfactants. It combines the characteristics of oil-base and water- base paraffin removers. First, select a non-ionic surfactant as a emulsifier to emusify the oil-base paraffin remover; then, break the emulsion before the paraffin remover reaches paraffin precipitation section of the oil well and release two types of paraffin removers to work together. This remover keeps the high effectiveness of oil-base remover and the safety of water-base remover, at the same time overcomes the flamability of oil-base paraffin remover and low efficiency of water-base remover, is a commonly used type. II．Paraffin Inhibitors 1. Oil soluble surfactant paraffin inhibitor: a compositional formulation of organic solvents and a variety of surfactants. It functions by changing the property of paraffin crystal surface. The surfactants are adsorbed at the paraffin crystal surface and impart polarity to it, thus preventing the further precipitation of

101 paraffin molecules. 2. Water soluble surfactant paraffin inhibitor: a compostional formulation of formaldehyde and a variety of surfactants. By means of adsorption and eutectic crystalization to paraffin hydrocarbons, it inhibit the growth of the paraffin crystal nucleus; at the same time, it prevents the deposition of paraffin crystals on the surface of pipelines and pumping rods by moisturing the surfaces. 3. Polymeric paraffin inhibitor: Formed by dissolving the oil soluble resins in oil solvents. It has carbon chain segments similar to that of paraffin. At low concentration, it can form a network throughout the crude oil. Paraffin hydrocarbons are adsorbed onto its network and form eutectic crystalization, separated from each other and unable to glomerate and grow bigger. 【Storage & Packaging】 The product is packed in galvanized iron drums. To be stored in a cool, well ventilated dry warehouse. Avoid direct sunlight and keep away from flames. 【Precautions】 This product is toxic and inflammable. Handle with care.

102 Oil field chemicals: Viscosity reducer for viscous crude

Viscosity Reducer for viscous crude

【Product Name】 Product Name: Viscosity reducer for viscous crude 【Performance Features】 1．Emulsifing and Viscosity reducing. 2．Moisturing and reducing the frictional resistance. 【Quality Index】

Item data Liquid Solid Appearance Uniform Free flowing liquid, No powder or impurities particles

Solubility Water soluble pH 值 6 ～ 8 Surface tension (for Liquid: 1% water solution, for Solid: ≤32 0.3% water solution，mN/m Interfacial tension(for Liquid: 1% water solution,for solid: ≤3 0.3% water solution, mN/m Viscosity Viscosity of ≤1000 ≥95.0 % drop Crude (50 ℃) mPa•s 1000 ～ 10000 ≥98.0 % 10000 ～ 50000 ≥99.0 % Stability of the emulsion Grade 1～4 Natural settling dehydration rate ≥80 %

【Application】 1. Using water soluble surfactant as emulsifier, inject the emulsifier water solution into the oil well or pipeline, and disperse the crude oil into o/w type emulsion. Thus Viscosity and frictional resistance is greatly reduced because the fricional resistance between oil slicks become the resistance between water slicks 2. Moisturing the surface of pipeline or pumping rod，change it into hydrophilic and form continuous water slicks, thus reducing the resistance in the crude oil flow. 【Storage & Packaging】 Packed in iron drums. The product shall be stored in a cool, well ventilated dry warehouse. Always keep the right side up during transportation. Avoid direct sunlight and open flame. 【Precautions】 May have harmful effect if contact with skin, eyes and respiratory system, or enter the human

103 body. The operators shall wear proper protection when handling. Wash with water immediately if contact with skin occurs.

104 Oil field chemicals: Crude Oil demulsifier

Crude Oil Demulsifier

【Product Name】 Product Name: Crude Oil Demulsifier 【Performance Features】 The demulsifier molecules can infiltrate and attach to the interface of the emulsion drops, substitute the emulsifier and break the surface slick, release the disperse phas, gather and split, thus breaking the emulsion. 【Quality Index】 Item Data Appearance Colour of the specimen shall be similar to that of the guide sample. No impurities, not laminating. Condensation Point Lower than the lowest local environmental temperature. Flash Point >20 viscosity ≤110％ of that of the guide sample Relative dehydration rate ≥90％ Water phase cleanness Grade 1 Dehydration interface Not lower than that of the guide sample condition 【Application】 High activity and good dehydration effect. Not only lower the water contentin the purified oil, but also decrease the oil content of the water of dehydration. Clearer water is obtained. 【Storage & Packaging】 Packed in iron drums. The product shall be stored in a cool, well ventilated dry warehouse. Always keep the right side up during transportation. Avoid direct sunlight and open flame. 【Precautions】 May have harmful effect if contact with skin, eyes and respiratory system, or enter the human body. The operators shall wear proper protection when handling. Wash with water immediately if contact with skin occurs.

105 Acid Fracturing Chemicals Acid Fracturing Chemicals: Hydroxyl Guar Gum

Hydroxyl Guar Gum

【Product Name】 Trade Name: hydroxyl guar gum 【Performance Features】 1. Good capacity of hi-temperature-resistance and excellent stability. 2. Having excellent electrolyzed-resistance and excellent shearing performance. 3. Effectively reducing the pollution to formation. 【Quality Index】 Items Data Grade I Grade II Appearance Light yellow powder Apparent viscosity, mPa·s ≥110 ≥105 Water-insoluble substance Contents, % ≤4.0 ≤7.5 Crosslinking characteristics Good cross-linking, Good cross-linking, can be can be picked or picked or hanged by glass hanged by glass rod rod Moisture content,% ≤10.0 ≤10.0 pH Value(0.6 % water solutioni) 6.5～7.5 6.5～7.5 Hydroxypropyl substitution MS ≥0.30 ≥0.15 flowability good average

【Application】 As an advanced non-ionic thickener, it has a good dispersion and solubility in water. It can be applied along with anionic, cationic or non-ionic surfactant. A fracturing fluid will be made by mixing guar gum solution into cross-linking agent and proppant to enhance oil recovery in the operation of Enhance Oil Recovery. 【Recommended dosage】 0.3%~0.5%. 【Storage and Packaging】 The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product r is packed in complex paper bag outside and film plastic bag inside. The net weight of the product is 25Kg ± 0.25Kg. 【Precautions 】 Spilled product in contact with water or moisture causes surfaces to become especially slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Washing with water after sink contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical

106 advice.

107 Acid Fracturing Chemicals: Fracture Proppant

Fracture Proppant

【Product Name】 Product Name: Fracture Proppant 【Performance Features】 The property ensures that under the high clossing pressure environment, the proppant will work effectively to prevent the fractures from closing. With different sizes and ingredients, the products have different strength. The higher the intensity, the stronger the bearing pressure ability. Fine-grained pellet, with high roundness. The even pellet will increase the proppant’s property of bearing pressure and permeability. Normally, pellets with diameter of 0.45~0.9mm are widely used, and few have that of 0.9~1.23mm. Few impurities. Impurities in fracture proppant mainly include carbonate, feldspar, iron oxide, clay and other materials. In application, we use Acid solubility to weigh the content of carbonate, feldspar, iron oxide in the pellets; while Turbidity to test for clay, silt and other inorganic. Too much impurity will block the fractures, hence reduces flow conductivity. Low density. Density is no more than 2000kg/m3, which benefits the fracturing fluid to transport proppant effectively. Stable chemical property. The proppant bears chemistry inertia in the high temperature salt water, and it has no chemical change with the fracturing fluid and the oil-bearing reservoir fluid, which further avoids the pollution of fractures. 【Specifications of Product】 Crushing Resistance Pressure Testing and Specifications of Proppant Size Bulk Density/ Clossing Bearing Crushing um Apparent Pressure Mpa Pressure kN Rate % Density g/cm3 3350-1700（6/12 - 52 105 ≤25.0 mesh） 2360-1180（8/16 目） 52 105 ≤25.0 1700-1000(12/18 mesh） 52 105 ≤25.0 1700-850（12/20 52 105 ≤25.0 mesh） 1180-850（16/20 - 69 140 ≤20.0 mesh） 1180-600（16/30 - 69 140 ≤20.0 mesh） 850-425（20/40 mesh） ≤1.65/≤3.00 52 105 ≤9.0 ≤1.80/≤3.35 69 140 ≤5.0 ＞1.80/＞3.35 86 174 ≤5.0 600-300（30/50 mesh） ≤1.65/≤3.00 52 105 ≤8.0 ≤1.80/≤3.35 69 140 ≤6.0 ＞1.80/＞3.35 86 174 ≤5.0 425-250（40/60 mesh） - 86 174 ≤10.0

108 425-212（40/70 mesh） - 86 174 ≤10.0 212-106（70/140 - 86 174 ≤10.0 mesh）【Application】 The proppant is mainly used in the oil and gas wells to keep the fracture open so as to provide a conductive path connecting a larger area of the reservoir to the well, thus increase and restore the rate at which oil and gas can be produced from the desired formation, meanwhile extend the service period of the wells. 【Recommended Dosage】 Depend on the actual fracturing situation. 【Storage & Packaging】 Open flame is strictly prohibited in storehouse. Packing is no loosing, no leaking and label is affixed. Storage in the open is prohibited, avoiding exposure to weather. All packing bags contain an inner lining and shrink film outside. 【Precautions】Nontoxic and harmless; please store it in airtight container and in dark place.

109 Acid Fracturing Chemicals: Clay Stabilizer

Clay Stabilizer

【Product Name】 Trade Name: Clay Stabilizer（CPCS） Chemical Name: Quaternary Ammonium Salt 【Molecular Formula and Structure Type】

Formula:（C8H16NCl）n（C3H5NO）n 【Performance Features】 1. The product is a kind of organic cationic polymer, and it can adsorb firmly on the surface of formation clay and stabilize clay. 2. it has good stability, also it is easy to be used. 【Quality Index】 items data

Appearance White or light yellow viscous liquid

Solids content，% ≥ 50.0

Density，% 1.10±0.05

pH value 7-9

【Application】 The product should be used in fracturing fluids and prevent the reservoir clay from swelling and dispersion. 【Recommended dosage】 Reference dosage: 0.5-2%. 【Storage & Packaging】 The product should be stored in dry workplace. Please avoid direct sunlight and. The guarantee period of the product is 1 years. The product is packed in plastic barrel. The net weight of the product is 25Kg ± 0.25Kg.

【Precautions】 Spilled product would cause surfaces to become especially slippery. Take attention to prevent package damaging. It may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Wash with water after skin contact. Flush open eyes for several minutes under running water. If necessary, seek medical advice.

110 Acid Fracturing Chemicals: Cleanup Additives

Cleanup Additive

【Product Name】 Product Name：Cleanup additive 【Performance Features】 1. The product is a colorless or light yellow transparent liquid. 2. The product can quickly and efficiently reduce the interfacial tension and increase interfacial additive 3. With the help of the product, the fracturing fluids can go smoothly into the formation and return completely. 【Quality Index】 items data Appearance Colorless or light yellow transparent liquid Density，g/cm3 0.95～1.05 pH value 7～9 Freezing Point,℃ ≤ -1 Surface tension（1.0% Solution）,mN/m≤ 30 Contact angle (1.0% Solution) ,° ≥ 45 Solubility in water No turbidity or sedimentation or stratification Cleanup ratio ≥ 15% 【Application】 As an additive for oilfield fracturing fluids, The product has the functions as following: reducing interfacial tension, increasing contact angle and reducing capillary pressure. As a result it can eliminate formation plugging and improve the rate and velocity of fluid return and then reduce damage to formation. 【Recommended dosage】 0.5%～1.5%. 【Storage & Packaging】 The product should be stored in dry workplace. Please avoid direct sunlight and. The guarantee period of the product is 1 years. The product is packed in plastic barrel. The net weight of the product is 25Kg ± 0.25Kg. 【Notes】 Spilled product would cause surfaces to become especially slippery. Take attention to prevent package damaging. It may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Washing with water after skin contact. Flush open eyes for several minutes under running water. If necessary, seek medical advice.

111 Tertiary Oil Recovery Chemicals Tertiary Oil Recovery Chemicals: Polyacrylamide

Polyacrylamide

【Product Name】 Product Name :Polyacrylamide 【Molecular formula】

molecular formula:(C3H5NO)n 【Performance Features】 1. Work as an excellent flocculant and viscosifier. 2. Good water solubility, easily disperses in water 3. Hi-temperature-resistance, salt-resistance and shearing-resistance. 4. Reduces water phase permeability in the formations effectively. Has the low adsorption to the rock surface in the reservoirs. 【Quality Index】 Table 1 Items Nonioni Anionic c Low degree of Middle to High High degree hydrolysis degree of of Hydrolysis hydrolysis Molecular Weight (Million)≥ 600 1200 1600 1600 Solid content,% ≥ 88 88 88 88 hydrolysis degree ,% ≤5 12--18 22--28 ≥30 Dissolving velocity,h ≤ 1 1 2 2 Content Water Insoluble % ≤ 0.2 0.2 0.2 0.2 Residual monomer,% ≤ 0.05 0.05 0.05 0.05 Table 2 Noni Anionic Items onic Low degree Middle to High degree of High degree of hydrolysis of hydrolysis Hydrolysis Apparent viscosity Conce 0.1% ≥ 30 150 200 200 of distilled ntratio 0.25% ≥ 80 350 400 400 water（mPa•s） n 0.5% ≥ 180 600 1000 1000 granularity （≥1.00mm，≤0.15mm）% 5 5 5 5 【Application】 The product is mainly applied in the operation of Enhanced Oil Recovery. It has the functions as the following: viscosity increasing, water loss reduction, rheological properties adjustment, gelation, flow distribution, profile adjustment, and so on. It can enhance the oil recovery by injecting polyacrylamide solution into the formation to improve the flow rate of oil and the water in the operation of Enhanced Oil Recovery, and effectly increase the oil yield in tertiary oil recovery. 【Recommended Dosage】 fresh water mud: 0.1-0.3%; Saturated brine mud: 0.5-1%。

112 【Storage & Packaging】 The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and rain. The guarantee period of the product is 2 years. The product r is packed in complex paper bag outside and film plastic bag inside. The net weight of the product is 25Kg ± 0.25Kg. 【Precautions】 Spilled product in contact with water or moisture causes surfaces to become especially slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin, eyes, and respiratory system. Protective equipment should be available when working. Wash with water after skin contact. Flush open eyes for several minutes under running water. If necessary, seek medical advice.

113 Tertiary Oil Recovery Chemicals: Surfactants

DYD Type Surfactants for EOR

【Product Name】 Product Name：DYD Type Surfactants for EOR Chemical Name: Dodecylbenzene sulfonic acid sodium salt and combination 【Molecular & Structural Formula】

Molecular Formula: C18H29NaO3S； CH3(CH2)11C6H4SO3Na Structural Formula:

【Performance Features】 1 、 Alkaline free formula, solveing the problem of scaling, demulsifying and waste water treatment of alkaline-surfactant-polymer flooding technology. 2、Using easily degradable, non toxic green surfactant, bringing no harm to the strata. 3 、 Compositional formulation with petroleum sulfonate creates synergy effects, ultra low interface tension is achieved, enhancing the effect. 【Quality Index】

item data Solid Content(%) ≥50 Interface tension(mN/m) ≤5×10-3 pH Value(1% water solution) 7.0~10.5 Water Solubility (10% water Uniform solution, not laminating, no solution) precipitates

【Application】 Mainly used in the binary combination flooding technology for tertiary oil recovery. 【Recommended Dosage】 Reference Dosage：0.1~0.3% 【Storage & Packaging】 Packaged in stainless steel drums. 【Precautions】 Designed for the sole purpose of the binary combination flooding technology for tertiary oil recovery. Other application prohibited. Operators shall always wear necessary protections. Keep air tight and prevent any leakage all the time during storage and transportation. Keep

114 away from flames.

115 Tertiary Oil Recovery Chemicals: Petroleum Sulfonate

Petroleum Sulfonate

【Product Name】 Product Name: Petroleum Sulfonate 【Molecular & Structural Formula】

Molecular Formula: C23H38SO3M 或 C31H48SO3M 【Performance Features】 1. Good water solubility and salt resistance. 2. Remarkably lower the oil-water interface tension. 3. Lower the water content of the oil well production stream. 4. Increase crude oil recovery rate. 【Quality Index】

Item Data Appearance Brown thick and viscous liquid pH Value 7.0-9.0 Active content ≥32.0％ Unsulfonated oil content ≤28.0％ Inorganic salt content ％ ≤9.0％ Water solubility, min ≤10 Interface tension, mN/m ≤5.0×10-2 Calcium and Magnesium resistance, mN/m ≤7.0×10-2

【Application】 Petroleum Sulfonate is an anion surfactant using petroleum cut or crude oilasrawmaterial. It has good interface activity, crude oil compatibility, water solubility, and is a very effecitve oil-displacing agent in tertiary oil recovery. 【Storage & Packaging】 To be stored in a cool and well ventilated warehouse. Avoid direct sun light and rain. 【Precausions】 Operators shall always wear necessary protections. Keep air tight and Avoid any leakage all the time during storage and transportion. Keep away from flames.