Instructions for Preparing Camera-Ready Manuscripts For

Instructions for Submission in Optics & Photonics Days 2016

Vahan Malkhasyan1, Rémi Meyer1* 1 FEMTO-ST, Université de Bourgogne-Franche-Comté UMR-6174, 25030 Besançon, France * [email protected] ABSTRACT In this paper, basic instructions for a submission for Photonics & Photonics Days 2016 are presented. This document contains information about all formats, fonts, the styles and sizes. The abstract part is limited to 150 words in one or two paragraphs. It should concisely state what was done, how it was done, why, and what are the primary results and their significance. The total paper length must be less than 1 page eventually including one figure maximum.

1. INTRODUCTION The submitted manuscript should be prepared according to the guidelines presented in this paper [1]. Submission should be done at http://www.femto-st.fr/Photonics-Day-2016 webpage. Please fill the form and join your abstract before 13th November.

2. TYPE OF PRESENTATION The author must include in the registration form which kind of presentation is wished. We encourage authors to try oral presentation if possible. Due to a limited timetable, some authors will therefore be selected as poster presentation so that the overall oral conference will sweep the widest range of topics possible. Note that poster presentation will be awarded with best “poster prize(s)”. 2.1 Oral Presentation Oral presentations are 15 minutes long including questions (3 min). Please be sure to stick to this schedule to ensure a global respect of the timetable. 2.2 Poster Presentation Poster presentations must be printed on a format ranging from A2 to A0. Please bring the posters from the very beginning of the journey so that they can be displayed during the coffee breaks.

3. VENUE Conference will be held in the TEMIS building of FEMTO-ST in Besançon (see Fig.1) where are hosted the Optique and MN2S departments of FEMTO-ST. TEMIS innovation center can easily be reached by bus from city center (lines 3, 11).

Figure 1.FEMTO-ST building at TEMIS center Further details on how to reach the FEMTO-ST building from various locations will be given by e-mail.

4. CONCLUSIONS See you in Besançon for the next Optics & Photonics Days 2016!

REFERENCES [1] Author, et al.: « Title», Journal., vol. X. pp. XXX-XXX (2016).