Press release

Arburg at the Interplas 2017: from high- volume stacking boxes to individual implants

 Broad range: electric and vertical injection moulding machine, automation and additive manufacturing  Allrounder Golden Electric: cost-effective entry into electric moulded part production  Freeformer: Arburg Plastic Freeforming for additive manufacturing of implants made from medical grade PLA

Lossburg, 27/7/2017 Arburg will be presenting the production-efficient manufacture of plastic parts in both high volumes and as one-off parts at Stand H4, Hall 4 at the Interplas 2017 to be held in Birmingham (UK) from 26 to 28 September. An Allrounder from the electric entry-level Golden Electric machine series will demonstrate the cost-efficient automated production of high-quality parts based on the example of "stacking boxes". A vertical Allrounder 275 V will be used to demonstrate the possibilities of the central Selogica control system. The fact that the Freeformer is in principle capable of processing the same materials as used in injection moulding will be demonstrated with implants made from medical-grade polylactide.

"The Interplas trade fair affords an excellent platform for presenting our wide range of machines for the production-efficient manufacture of plastic parts to our customers in the UK and Press release

Ireland. This year, we will be presenting an electric Allrounder Golden Electric injection moulding machine, a vertical 275 V hydraulic Allrounder and the Freeformer for industrial additive manufacturing," explains Colin Tirel, Managing Director of the Arburg subsidiary in Warwick. "At the Interplas 2017, we will demonstrate the capabilities of our robotic systems on our electric injection moulding machines. After all, automation is key for many of our customers, helping them to increase productivity and remain competitive. We have an expert in production cells at our subsidiary and are able to offer complete turnkey systems from a single source."

Golden Electric: high-performance, precise, energy efficient At the Interplas 2017, Arburg will use the example of stacking boxes to demonstrate why the Golden Electric entry-level electric machine series is mainly used for the cost-effective, reproducible manufacture of high-quality technical parts: an Allrounder 470 E Golden Electric with a clamping force of 1,000 kN and size 290 injection unit will produce the 74 gram moulded part in a cycle time of around 20 seconds. A linear Multilift Select robotic system removes the stacking boxes and sets them down onto a conveyor belt. The electric Allrounder Golden Electric machines are available in four sizes with clamping forces from 600 to 2,000 kN. Thanks to consistent standardisation with, for example, a fixed combination of distance between tie-bars, clamping force and injection unit size, this machine series offers an outstanding price/performance ratio. The dual five-point toggle system ensures high-performance and fast cycles. The play-free spindle drives operate with great precision. The position-regulated screw ensures excellent moulded part quality. Press release

Central Selogica control system The second injection moulding exhibit, a vertical Allrounder 275 V, will demonstrate the benefits of the freely programmable central Selogica machine control system. These include, for example, intuitive graphical sequence programming, automatic plausibility checks, integration of robotic systems and peripheral equipment, as well as the allocation of access rights. Furthermore, the Selogica "set-up assistant" module helps you to set up and configure the machine quickly.

Freeformer: implants made from resorbable plastic At the Interplas 2017, a Freeformer will demonstrate the potential of Arburg Plastic Freeforming (APF) for medical technology: the exhibit will use an additive manufacturing process to produce customised implants for facial and cranial bones from the same qualified, commercially available plastic granulate as used in injection moulding. The raw material employed is medical polylactide (PLA), which is resorbed by the body after a defined length of time. In terms of industries and areas of application, the possibilities of the Freeformer are virtually unlimited. It is equipped with two discharge units as standard. This enables it to process an additional component, for example to manufacture a part in different colours, with special tactile qualities or as a hard/soft combination. Alternatively, structures can be built up from a water or alkaline-soluble support material, enabling complex part geometries to be achieved. The integration of functions by combining part production and assembly in a single process step is a further means of achieving cost efficiency. With this additive manufacturing process, complete modules can be produced in a fully-assembled state. Press release

Photos

ARBURG 099282 Allrounder Golden Electric.jpg

The electric Allrounder Golden Electric machines are available in four sizes with clamping forces from 600 to 2,000 kN.

ARBURG_ 099235 Freeformer Implantat.jpg

Additive manufacturing: a Freeformer will produce an individually adapted implant for cranial bones using medical grade PLA granulate at the Interplas 2017. Photos: ARBURG Press release

Press release File: 0b9b5dd807766c87feddb9f2c7d9d1b5.doc Characters: 4,409 Words: 652

This and other press releases are available for download from our website at http://www.arburg.com/press

Contact ARBURG GmbH + Co KG Press office Dr Bettina Keck Postfach 1109 72286 Lossburg Tel.: +49 (0) 7446 33-3259 [email protected]

About Arburg A German family-owned company, Arburg is one of the leading global manufacturers of plastic processing machines. The product portfolio encompasses Allrounder injection moulding machines with clamping forces of between 125 and 6,500 kN, the Freeformer for industrial additive manufacturing and robotic systems, customer and industry-specific turnkey solutions and further peripheral equipment. The company places the topic of production efficiency at the centre of all its activities, taking into account the entire value-added chain. The objective is to enable ARBURG customers to manufacture their plastic products, whether as one-off parts or in high-volume production, with optimal quality and at minimum unit costs – e.g. for the automotive and packaging industries, communication and entertainment electronics, medical technology or the white goods sector. An international sales and service network ensures first-class customer support at the local level: Arburg is represented by fully owned organisations at 33 locations in 25 countries and by trading partners in more than 50 countries. The machines are produced exclusively at the parent company in Lossburg, Germany. Of a total of around 2,700 employees, about 2,200 work in Germany. About 500 further employees work in Arburg's organisations around the world. In 2012, Arburg became one of the first companies to gain triple certifications: ISO 9001 (quality), ISO 14001 (environment) and ISO 50001 (energy). Further information about Arburg can be found at www.arburg.com.