Charges for Equipment in The

EXTERNAL CHARGES FOR EQUIPMENT IN THE GRADUATE CENTER FOR MATERIALS RESEARCH Phone: (573) 341-4873 Fax: (573) 341-2071 E-mail: [email protected]

Effective September 1, 2016

The Graduate Center for Materials Research (MRC) has a large variety of research equipment that is available for use by Missouri S&T faculty, staff, and students. External users are charged for supplies, equipment depreciation, and operator salary via a pre-arranged Non- University Use of University Equipment, Facilities, and Resources Contract. Reduced rates are available for federal funding sources.

To use this equipment you should contact the persons listed below. Special scheduling arrangements can often be made to fit unique circumstances.

Equipment Person to Contact for Scheduling

SEM Dr. Clarissa Wisner (341-4393)

Dualbeam FIB/SEM Dr. Jingjing Qing (341-6467)

TEM Dr. Jingjing Qing (341-6467)

RAITH e-Line PLUS Dr. Clarissa Wisner (341-4393)

TGA/DTA/Digital Image System Dr. Eric Bohannan (341-4534)

XPS Brian Porter (341-4395)

X-Ray Diffraction Dr. Eric Bohannan (341-4534)

AFM/STM Dr. Eric Bohannan (341-4534)

All other Ron Haas (341-4356) or Director of MRC (341-4873) GRADUATE CENTER FOR MATERIALS RESEARCH EQUIPMENT USE CHARGES

Charges Billed via pre-arranged Non-University Use of University Equipment, Facilities, and Resources Contract

NOTICE: THERE MAY BE ADDITIONAL CHARGES FOR MATERIALS, SUPPLIES, AND INDIRECT COSTS DEPENDING ON SAMPLES EVALUATION AT TIME OF SERVICE.

I. Field Emission Scanning Electron Microscope (FEGSEM) $220.00/hr Hitachi S-4700

II. XPS Spectrometer $197.00/hr

III. X-Ray Diffraction Units

Philips Thin Film (MRD) $169.00/hr

Philips MPD Powder $178.00/hr

IV. Thermal Analyzers TA-DSC $93.00/hr

Netzsch $143.00/hr

High Temp or Mass Spec > 1000° an additional 1 hour will be added to cost

V. Scanning Tunneling/Atomic Force Microscope (AFM) $169.00/hr

VI. Dualbeam Focused Ion Beam/Scanning Electron Microscopy $468.00/hr (FIB/SEM)

VII. Transmission Electron Microscope (TEM) $454.00/hr Tecnai F20 STEM

VIII. RAITH e-Line PLUS $445.94/hr E-beam Lithography