Transcript from 133Rd Knowledge Seekers Workshop Held August 18, 2016

Transcript from 133 rd Knowledge Seekers Workshop held August 18, 2016

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) Transcript courtesy of Lynn Schmaltz

Video link: https://www.youtube.com/watch?v=Qq8SNB2622M

1 Transcript from 133 rd Knowledge Seekers Workshop held August 18, 2016

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video)

Transcriber’s Comments:

This transcript has a couple of hours missing in the middle but is still full of vital information. This is the usual Thursday Knowledge Seeker workshop of almost 4 hours, but follows the special presentation of the night before in the McClendon room in Washington DC, and MK goes into more detail on how we might make these Generator units work, not really requiring the use of fridge compressors, but requiring the setup of a Plasma heart beat for example…

The 2nd part of the transcription, starting at 2.55.34, is after a presentation by a Chinese Knowledge Seeker showing his experimental construction with drawings showing the interactions, on how to make a Magrav unit with Liquid plasma. MK asks Vernie to explain how this would work and Vernie brings out the Innovation team paper from May 2015 showing a liquid plasma Magrav unit using GANS materials around Lead (Pb) cores. These are the units MK mentioned in last night’s presentation when he pointed to the developments in the near future of wireless Magrav generators and small Generators the size of Rubik cubes… Interesting and worth studying for anyone wanting to experiment and develop this technology…

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) Towards the end of the workshop MK draws our attention to the fact that the Magrav technology is alive and connected to human consciousness, and therefore it is critical that we are in the correct frame of mind when we create these systems … “These systems are getting more and more connected to your school of thoughts. You touch it, you build it, it carries your emotions and with it, it carries the essence of your thoughts. Go back to the very first teachings. If you understand it, maybe they come home and as we say it is time for the eggs to come and hatch. I told you from day one, when you make a system pray for your system. Praying is giving and in giving the correct thoughts you shall receive the birds. We are coming to it very, very fast. Many of you will come and cry and say that your system doesn’t work. Especially when you go into these bottle systems, into the gans and the fields. You have touched it and you carried your emotion to it. don’t forget about the mother and the child. It does not matter where the child is, the mother feels the emotion. The child is your touch and your amino acid you deposited on it. This is what you have to learn; I have brought you in the position that there is no choice but correct conduct because you don’t get what you want unless you understand why you are wanting it and it is correct for you to have it. Look at all the structure, look and understand the totality, look and understand what the system gives you and why it gives you and what you were expecting of it. Do I want gold to show off that I am rich, or do I want gold so I can pay and my soul is at ease? If your intention is to become rich you will never create gold. You will call me the guy is talking rubbish. And the guy whose intention is to make gold and prove that the technology is correct delivers. Because he knows with it, it will change a lot of things for people to understand that there is no respect for the metal or the matter. That is why we see so much success with certain individuals work across the foundation. The soul is clear and you have not understood. Some of you are too busy not paying the electricity bill and just looking for the government to give you everything. who is going to put the police force on the street and who is going to keep the hospitals going when you are sick? Start, when you work with these systems, to change your ethos. The only person who can elevate your soul is you and nobody else. And in elevating your soul you elevate your physicality. In being able to share more and give more with the hope that you receive the strongest fields from those who have given and all the weakest fields have been spread on the ones who are weaker in intention. When I give my wish it is the same as what I explained with the north pole and the south pole. the energy at the top is the giver. The ones who are petty and want to take, they take from the weakest of the strongest of the fields of receiving. But the man who has full intention receives the most powerful energy and gravity. That is how the system works and that is how the sun creates its own fields. that is how you go in as the weaker and come out as the stronger…”

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) Transcript:

Rick (R): This is the 133rd Knowledge Seekers Workshop, Thursday August 18, 2016 and it’s a very big day for the Keshe Foundation workshop. First I’ll play the Mozhan video and then we’ll get into the main part of the workshop.

Would you like to be one of the first humans in space using plasma technology? The Keshe Foundation (KF) Spaceship Institute (KFSSI) is now taking applications for the man origination Zone Habitation and Nutrition Training Program or Mozhan. The goal of Mozhan is to teach trainees how to create and utilize the magnetically oriented joint application and nutrition system that will be used for life in space. Be one of the first humans in space using plasma technology. The 3-month Mozhan training program begins in the fall of 2016. Apply today at Mozhan at KFSSI.org. trainees will be taught every aspect of plasma technology needed for them to go to space and will be educated in space ethos. Participants are expected to bring the knowledge forward to peoples of their nations to prepare them to become peoples of space. Matter propulsion technology—today on earth we use inefficient and costly rocket propulsion technology which burns fuels to overcome the magnetic gravitational fields of the planet to go to space. We power our rockets, our cars and our homes by burning matter to release the energy that we convert from one form to another in order to create motion and usable energy as well to achieve objectives. Rockets for example have to carry large and heavy payloads of fuel which means that they are payload depend. Matter propulsion technology is very destructive, inefficient, polluting and wasteful. Now let’s look at the new alternative: plasma technology. Plasma technology uses the properties of the entirety of plasma to create motion, lift and energy without destroying the characteristics of matter. The system utilizes Magnetic and Gravitational field interaction to attain positioning and motion. There is no waste and no pollution is created. Plasma technology is efficient and not destructive. Current human scientific achievement is the result of a progression of evolution of science and technology over thousands of years. plasma technology is the next step in our evolution. It is viable, and it is here today. You could be one of the humans in space using plasma technology. Apply today to the Mozhan training program. Mozhan.kfssi.org

R: Okay, let’s move into the main part of the workshop here with Mr. Keshe. I believe he is available. Do you have the video feed?

Keshe (K): yes, good morning, good day to you as usual wherever and whenever you listen. No, we don’t have the video; it was set up for the presentation last night. And first of all I would like to thank all of you who are involved in different ways to see and to set up the meeting last night. My answer to what happened yesterday was the best thing that could happen to us. At the beginning it looked very much a problem in breaking the system and not being able to show the 5 kW light but in fact it was a blessing in disguise. But not allowing or not happening that we

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) could show live the presentation of the system breaking down, it allowed us to speak frankly to the Americans.

K: it allowed us to open the door in so many ways for those who aware but they could not understand the position of the foundation. I think the whole meeting wrapped up in the last 10 minutes and immediately after the meeting within 25 to 27 minutes after the close of the session last night, we received an offer which we could not refuse. We have accepted the offer; you know who you are. I respect your leadership. The offer on the table is beyond understanding of some nations, but as I have said, accepted. If the Mozhan takes place as we expected you will hear new dimensions to the research, the development and expansion of the Keshe Foundation technology worldwide. This is a decision we make and our leaders make decisions and the whole technology changes.

K: on the other hand, if you were present last night in the discussions in Washington we showed 2 new pieces of equipment to show how much we have done in extending the knowledge of the solid state generator. You are seeing how far we are in respect to application and implication of wireless technology. These take a few more weeks of completing, maybe days depending on how everything works. And, I think if we get the response which we expect as usual, things don’t happen the way you expect, the new solid state power generator will be an easy way for energy production. Not everyone in Africa, South America or other parts of Asia can find these compressors or can find the creation of triggering the life within the system of the generator. The new solid state totally plasmatic system allows anyone to reach the position. The whole target is to show energy can be produced without fuel and we have achieved this.

K: in so many ways we achieved more last night than we achieved over the past year. In bringing awareness to a number of people we are key players in the world politics at the last 10 minutes we received a message that we had been heard. These things are important. It is important for where we are going, how we are doing and how we intend to use our work. How we intend to proceed with the development. We were online nearly 10 hours last night all together in 2 sessions and then carrying on with other session with another part of Washington. I would like to thank Douglas for his sincerity and his work. He has put a lot in and as a man of army he could easily carry the message to the army and hopefully what the American army has put on the table as the acting officer on duty when the proposal was made, we responded the same to the American army and to the other armies around the world. we have to make the army of peace, not the army of war. That is the only choice and the only chance we have. as an organization which not only has the power and the knowledge but they have the determination to

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) achieve peace through the technology. I thank all of you in the background; it was not easy to set up.

K: I thank our attorneys in Washington who put a lot of effort to the session last night. Last night’s session was not so much about the numbers but the quality of the listeners in the background. Those who were listening gave instructions. I will respect their instructions and my offer and my foundation accepts the offer you have made to us. Leadership needs wisdom and wisdom comes from service and commitment. In respect to our work and the generator I have seen a lot of work going on with us in Rome, the Philippines and two other places are heavily testing, heavily developing and testing every aspect of the technology. If you have seen the blueprint and you are working on it, please understand that the system can have depending on the phase and the frequency of your setup two different ways to start it up. If you use the fish tank pumps that we use as a trigger point you have to understand what the output of your ‘fish tank’ is. It is not just that you have a fish tank pump. We start the procedure. The output of this system is usually about 110. If you are operating in the countries where it is 220 you will find problems because you cannot achieve the current and the voltage.

K: so, you have to change the system which brings. Be careful with the words that we use: the magnetic flow current of 220 signal generators do not give such opportunity. The small power units do not give this opportunity. The reason the batteries work, the 6-volt battery works, is because you have to go to understand the structure of the current flow in these systems. They have both AC and DC and the conversion from AC to DC creates electro-magnetic flow within the pump which starts and matches the condition of exciting the plasma to what I call the heartbeat of the plasma. When you use single generators this magnetic field flow is missing. The current flow from the battery into the winding of the pump in interaction brought with AC and DC on the battery creates a specific kind of gravitational magnetic plasmatic field growth which matches the plasma flow within the coils that you have. this is extremely important to understand why certain systems work and why certain systems don’t. when you use a generator you create more or less the same condition as using a battery. The structure is not the same but can reach a certain speed to create the interaction. You have to understand why for example Douglas’ system responds in that order. Because it is a combination system, not a single system. On the other hand, if you have system that can release 220 and the phase, you have to understand you need a system in your capacitor and a compressor that has a delay in reaction and that delay in reaction creates the positive release of plasma. if you look in the drawing we have capacitors in the red compressor. For this capacitor to charge and discharge creates that delay that the two motors cannot synchronize. But in not synchronizing they create the heartbeat or the pumping that allows the fields from the stack of coils to be released. A number of people have notice and have told me that the setting of the plasma capacity is wrong. It is negative to negative of their

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) magnetic gravitational system, Magrav system. It is not wrong. I was told the same and I looked at it but the innovation center confirms this is correct because they are set as parallel. So the two negatives are the same and the two positives are the same, when in fact when you connect when you start the system up, you receive against all the works of the physics, two positives. Each one is negative at your load. This is a strange set up but in dealing with the plasma you have to close the loop with the plasma as we said for example in the structure of the planet it is the same field… 16.02 … Much more vital information missing from the transcript at this point

2.55.34— (After a presentation by a Chinese Knowledge Seeker showing his experimental construction with drawings showing the interactions – how to make a Magrav unit with Liquid plasma)

K: This combination of bottles containing GANS was first showed by Renan and Vernie in Dubai - A lot of people didn’t understand it. Vernie (V), would you like to comment on this? because you are an expert in this.

V: yes, Mr. Keshe. What is not shown in this drawing are the coils in between the bottles. There are 3 Magrav coils. Can I annotate?

K: yes, you are already doing it. let me clean up from my side. Let me explain what Vernie is doing. We have already developed this in the KF. There are some pictures here overlapping. We have already developed this in the innovation center in conjunction with the coils. We showed it last night. And this is a combination of the plasma gans and the nano material coating. You can create such a thing; it is very easy. What I explained to Vernie when he wanted to do this is that when you make commercial units that contain liquid this is part of the problem. So we have to step down to the matter state to create such a thing in the coil structure. And what Vernie is going to explain to you is that structure which I designed and Vernie has added a different connection at the same time to it and it works like a heartbeat. And it becomes a self- sustaining system. Go ahead please, Vernie.

V: this is correct; the introduction is correct for this side. (257.30 minutes) What I have shown yesterday and what you notice is that we have this container and this container and this container… and the one in the middle…

K: please use a thicker colored pen; this is very faint, what you are doing, please. Use a thicker pen. … I am removing what I put in there so you can carry on showing your clean sheet now.

V: what I am showing (2.58.38 minutes). This part here, these are containers here and one in the middle. What I have, these are liquid plasma and they are arranged in the correct manner. What you did not notice are the Magravs in between them, here, here, and here (blue circles) which

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) have connection like this. (2.59.12 minutes) they handshake with each other. Magrav in the way that you have magnetical and gravitation in the middle in each of the coils. And if you have this configuration….

K: (02:59:30) just wait one second; can I add something please. You have to understand that here we have come to the next step and what Vernie is explaining now that where he put these blue circles (around the lead in the center circle), these you don’t have. these are field interactions. You have to count on these from now on. You cannot just put the bottles and say I connect the bottles. The bottles’ configuration creates a star formation and each of these points as Vernie is showing, each of these points don’t exist in the matter state. you cannot see them but when you organize your system that you tap into energy at the certain point, you will find out that you absorb different energies and that is what Vernie is talking about—how you connect and these are now dealing with the gans liquid plasma (3.00.32 minutes) and field strength. you use the liquid plasma to create a point of fields and then you connect that point of fields in your system to each other, am I correct?

V: yes. I suggest in this drawing we see it all in field interactions. Just see it that way. when we connect, let’s say if we connect a wire from CO2 to any of the wires … all of these are nano- coated. Consider that as a directional flow from liquid plasma to the nano-layer. These are all field interactions. When we see it that way it will be easier to evaluate the reaction. Can I continue, Mr. K?

K: carry on; we just fill in a little information from me that they understand it.

V: okay. Let me use another color. (301.48 minutes) Let me label the red one as the magnetical on each of the nano-coated coils. Then this one is our gravitational (3.02.16 minutes); it is the coil on the center (right side of the first drawing of the 3 coils in the group on the left side of the whole drawing). The connection would be from here and going there (going around from the coil in a counter-clockwise manner 302.33 minutes) and extending your magnetical and gravitational is received somewhere in the middle. What you now have the flow (the flow of the 3 coils) similar to your black arrows there. so from magnetical which is the red line joining the coil on the drawing, to gravitational, so from MAG TO GRAV. So you have now the flow. Then they are placed in this manner.

Then you have CO2 on the outside left of the first group of three and as you can this CO2 is in proximity and very near these fields of the Magrav. The CO2 also has its own field. They are already interacting. But this CO2 is very far from the other. So to complete the reaction of this container, this field of the CO2, we extend this to this point on the gravitational of the opposite coil. You do the same from CH3 to CuO and from CuO to CO2. So in here the group of 3…one

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) coil near CuO, the CO2, and one coil near CH3, they are interacting. You have the same 3-way interaction with the coil between CO2 and CH3 and the coil between CH3 and CuO. You are always working in “3”. In order to supply the other one that is opposite we intentionally connected ‘there,’ on the leg of the Magrav which is more giving gans and so it should be received by the receiving end that is the gravitational of the opposite coil.

V: now the center one which is more gravitational in strength, the lead gans liquid plasma middle one—you can then connect this to CH3, magnetical, CuO magnetical and CO2 magnetical. This completes the circuit. So we have full interaction of everything in here. All the gans interact with all the coils so each gans interacts with the coils and the connection is correct in the sense that from magnetical goes to gravitational and magnetical goes to the center also.

K: can I ask you one thing please? You have this theoretical picture which he has drawn. Can you show us a real one which you have and then people can see it so people can understand? Can you show us one of yours?

V: okay, I’ll get the photograph.

K: okay, you have to see what you are showing. You saw the teaching last night to the American scientists and organizations. And you have understood it and you have seen it, but you have to understand the totality of it. This part of development has been with us for some time and we have even taken it into production in the factory in Italy. Renan can show you the blueprint of this energy structure. We understand this fully; Vernie is very good at this development.

V: can I share the screen? Yes. stop sharing and we will take over for a second please. (3.08 minutes.)

K: this is the set up.

V: this is what I showed yesterday. These are 3 units. You only need this one (pictured at the top—3.07.25 minutes). What we have discussed is on this one. I took a picture of 3 units that were for testing at that moment.

(3 pages of description of a Magrav Unit using liquid plasma come up, designed by the Innovation team, and dated May 2016.)

Plasma Reactor

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) Page 1 Magrav Unit using Liquid Plasma

The development of plasma is now on the next level that we are able to create stronger dynamic fields, which our existing combustion engines running machinery or vehicles can use it as a source of energy to supplement the existing fuel it is using. Such development is made successful with the use of different liquid plasma or water of GANS. We have identified which is more gravitational in strength. Having knowledge of such characteristics enable us to identify the basic building blocks of a Magrav device or plasma reactor. For the more gravitational in strength, we have the water of GANS of lead. For the more magnetical in strength we have the water of GANS of CuO, CH3 and CO2.

The use of the water of these GANSes is an important discovery in the field of plasma technology. Now we can form Magravs or plasma reactors, which do not need mechanical movement from electric motors, that can build its field on its own and can exceed its field from 3 meters radius or beyond. The application for such devices will greatly depend on one’s imagination and understanding and for the moment as a transition period it is very useful to augment the fuel efficiency of combustion engines and reduce the air pollution produced by these engines. By sharing this initial finding and application, together we can implement its use in a very simple way of how to make such a device that anyone can use without one having to alter any existing setup on the combustion engine. Since we have (one line covered over with function line) …the energy source. In this case our combustion engines can now perform better with this plasma source of energy.

As an important prerequisite one must have the initial knowledge and understanding of how to make such GANSes like CO2, CH3 and CuO and of course how to nano coat copper wires that we will be using here as coils for our tiny version of a Magrav coil. The nano coating process that we use here is that by using fire from a torch.

P.2 Solid cooper wire, gauge 14 made into 18 turns coils, bigger one has a 5/16”h hole, another one has a ¼” hole. Insert the small coil into the bigger coil.

On one end of each double coil, connect the two coils that one will loop on the other. (3.08.56 minutes)

Cut excess wire to make a clean loop that is pointed back to itself.

Now you have each set of the double coils joined at one end. The other ends are not connected with each other.

P.3 Fold the other free end of the double coils. Center coil (gravitational coil) to the left, the outer coil (magnetical coil) toward the bottom. Doing this will make it easy for us to connect with the other coils of similar shape.

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) Connection will be from magnetical toward gravitational of the outer set of double coils. Magnetical is the outer coil and gravitational is the inner coil of the double coil set. Cut excess wires from each end pointing itself.

The strength of each leg of the coil will be determined by the container of liquid plasma that we will put in the middle of these three double coils (Magrav). It should be perfectly tight holding the container for a compact formation.

P.4 Now you form these coils in formation. It is ready for nano coating by fire from a torch. After nano coating wrap each set of coils with shrinkable wraps or tubes to protect the coating. One can use plasma tubes to house the coils.

We have nano coated and shrink wrapped the coils (in the middle photo). This time connect stranded wires on all magnetical legs. The other end of these wires will be connected to the center wire in the middle container. Secure each connection with an electrical tape or hot plastic glue.

Prepare each bottle with liquid plasma and individual corresponding coils (bottom picture). CH3, CO2 and CuO Gans will take a clockwise winding single cell, 18 turns, gauge number 14 nano coated solid copper wire. Lead GANS will be counter clockwise winding single coil.

K: go back please. (307.41 minutes) Do you see the bottom picture here? Are people still using matter state to nano state? if you look at the red wire it is not nano-coated and we will have problems understanding these things.

V: yes. this assembly is not yet nano-coated, but I was in a hurry.

K: I understand; you have to say nano-coated condition.

V: yes, but for this time you see it the more becomes efficient. They are short wires so I did not worry about it.

K: no problem.

V: I will show you step by step how these were made. The coils are made this way; they are done this way and the ones on the right side on the photo (3.08.44) are the gravitational coils which are the inner coils and they will be inserted in the middle and you see the other one which has an extension wire and then you connect them this way. (3.08.56 minutes) We have an inner coil and an outer coil that you connect in this way so as to have a continuous flow. We have a Magrav, a very small Magrav. You can see how small in the photo when you see the size of my fingers holding the coils. That is how small it is. I put them this way but when I put them side

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) by side, then you see they go this way. (3.09.35 minutes). The distance here is enough for the container to get inside.

V: So when we hold this in this manner you see the outer magnetical coil is positioned by gravitational on the next and going here on the other side and so on. So they are counter clockwise in the giving flow manner. So the winding is the same as they are counterclockwise. They are connected and now I nano coat them. then I connect the wire. This red wire as you can see are connected on one side only (310.31 minutes – middle photo), but the same side reaches the magnetical of the coil. You see when you have this connection, let me make this bigger, when you have this connection here at the junction (middle photo) we also have the separation. The other side is magnetical and the receiving end is gravitational.

V: Now this red wire is connected on the magnetical. All of the magnetical have this single (red) wire. And later on they will be connected in the middle container. So next I prepared, since we will connect this to the container, of course you will insert the wire in the container. And they should be touching something in the container which is liquid plasma. But in the liquid plasma we have again nano-coated coils submerged inside. This is how it is done (311.44 minutes). I only used single coils there but they convey polarity in the manner of winding. So I have been using this convention ever since we have been using coils. We are aware of this polarity. Even if they are not nano-coated they respond properly when they are done this way. The clockwise one responds very well when they are negative and the other one is positive. So the lead gans what is inside there, as it is more gravitational, I will pair it with more magnetical coil. This is not a double coil; it is a single coil. So this is pairing more magnetical and more gravitational. CH3 is more magnetical or more giving and I pair it with a receiving coil which is gravitational. This will be inserted in the bottles and connected with this corresponding wire. For the lead gans you have this red wire and what you see on the outside of the containers we have the blue wires.

K: you are releasing the whole blueprint.

V: yes, because you asked me to explain and there is no other way to explain.

K: we receive this with great pleasure and we have no problem. At the heading of these papers these were completed the 23rd of May. So when we teach and were talking to the Americans we know what we are talking about as we have been developing this for over 6 months. So this is the understanding of new technology.

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) V: this was already running before May. I did this in April. We had been running it for a month when we did the paper. Let’s go back to the photograph in the middle. The gravitational is where we connect the blue wire coming from the bottles on the opposite side. That is the complete set up on this wireless set up. This works wirelessly because the moment you connect the last wire it will work automatically, instantly. The moment you disconnect the middle wire, the field will collapse. When you connect it, it will turn back on as if you are making an instant balloon of fields. You can literally feel it if you put your hand on top of the containers. It is a very strong field. You can feel it. So this is how it is done. The previous drawing of field interaction is scrapped and what is left is this. I use shrinkable rubber tubes here just to protect the coating because I have been handling this during assembling so to protect the coating I use the shrinkable tubes. And when I open one of the wires, and I did open all the wires just to see, nano coating starts and it started in a group of stranded wires, it started from the middle going upward. That is how the nano-coating started. I think this is all of it.

K: thank you very much Vernie. Now can we go back to our Chinese friend and let him explain what he is showing us please?

Susie translating (S):

K: can I explain something here? Vernie correct me if I am wrong. There is a problem in your setting and you have disturbed your flow. If you want to go from the right to the left hand flow, you have CH3 and CuO and this field flow is totally the opposite. If you change the position of CuO and CO2 on the left hand one, then you are correct. This picture with the arrow doesn’t fit into the understanding. (3.17.15 minutes) Correct me if I am wrong Vernie. The flow always comes from CH3 to CO2 to CuO clockwise. (3.17.36 minutes). Your flow is counter clockwise and not clockwise. You have magnetical feeding gravitational. Here, you have a flow and the way I understand it and we work with it is your drawing shows you are feeding from the magnetical into a gravitational (CH3 to CuO) counter clockwise. Then you are feeding from magnetical to gravitational (CH3 to CO2) and then you are feeding from the magnetical in comparison to that. this is a conflict and then you see your system doesn’t work. Here you have the same problem and if you look your system is feed CO2 to CuO and it’s feeding on the right side drawing from CH3 to CO2. and you have absolute chaos in here.

V: okay these drawings are in respect to each of the containers, right?

K: yes. but when you get field flow it is not homogenous. Even though the flow here (from Pb in the center) is from Pb to CH3 (3.18.50 minutes) and it is from Pb to CH3 and it’s from Pb CuO, and it’s from Pb to CO2.) You have a conflict of the flow.

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) V: not a problem Mr. K because we have these wire re-directing the liquid plasma flow.

K: if you re-do your wires you will find out that you get a better efficiency and a bigger expansion of fields. because you are losing part of your fields in these interventions and in these misfits of the fields. you understand?

V: yes, I understand. That is why our next version of this at the moment we were able to reach the bigger fields when we took another container and we rearranged the bottles. We put something in between the bottles.

K: it’s just that when you start working with plasma, you put the matter state, you put the nano coating and then you look at the plasma field flow very clearly. You don’t need to waste time. all it is, is the difference between one Kw and 10 Kw. Because once you create a barrier then a lot of energy is used to overcome this barrier. Once you create a free flow you will find out the field will keep on expanding and expanding. A little notice to detail makes a huge difference in the outcome of your system.

V: yes, we have noticed that Mr. K. Imagine from 3 meters to 34 meters.

K: it was just by replacing one bottle.

V: yes, just by rearrangement...

K: yes, of one bottle. This is why and then if you want to increase and this is what I said last night to the American military and I was understood fully: if you even bring in the distance of these closer, the positioning you have if you bring these distances closer or further, and change the composition of this (the lead in the center) you can increase your fields to 34 kilometers. I’m good at this and I have done this for many years, very, very little and people don’t notice because they are so materialistic. A little positioning will give you a field distance beyond your imagination. How the bottle sits, where you put the bottles in respect to each other and here you see them closely packed, but in fact you have to look at how far. Why does it expand? This is a replication that I will explain to you so you understand fully. I am taking all the flows out of the diagram (3.22.06 minutes) because those of you who are in the dynamic version of this, like Douglas, Armen and others, maybe you understand where the problem is or what you can add to the knowledge.

K: this Pb in the center is exactly like your center core and a circle around the outside of the CO2, CuO and CH3 is like your outer core (3.22.29 minutes) in the balls you are making and the environment (somewhat outside the circle around the outside of the CO2, CuO and CH3 is like your third bottle. When you feed so much so much to CH3 from Pb (lead center) this absorbs so

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) much that it has to feed back out and then what do you get? You get the explosion of fields. It is like throwing a stone with a rocket propulsion system and it goes hundreds of kilometers. Because, it is not what it gives here from the CH3 to the CuO, it’s how much it adds to the energy of the center (Pb) and how powerful the center becomes that it pushes this (3.23.11 minutes), the Pb, overcoming the field and then you just dictate the distance. This is how you paralyze military forces with a little bottle. (3.23.21 minutes) You heard me... listen to the teaching yesterday. I gave a very clear, very subtle information—a little Chinese fisherman amongst the American navy in the south China Sea. The fisherman carries a little ball. The Americans cannot believe that such a little ball with no motor, as a drinking bottle, can create such mayhem. You need to just put a fish that carries the bottle inside of it.

K: the power of this technology is so much that it is for you to understand, but you have to understand how you organize it and how you dictate it. and the strangest thing is, if the man who builds the system puts a drop of blood of himself inside it the fish will flow among the ships as he decides and looks. It is the naval ships that are paralyzed beyond it because they don’t see the fish. All you see one by one is the boats sinking. You heard me last night and what I said in the teaching. Give me 10 minutes and you choose the boat. I don’t even need to be in China. I can sit here from Europe and control the fish.

K: Electronic systems are too slow. If you can with the addition to the extension of the knowledge you put a drop of blood but you put with it a drop of iodine as well too which connects to the emotion of your soul which means you cannot do anything wrong. You shall not harm anyone. But matter state finds its position. My intention is peace; the total system is in the stomach of a fish. Your intention is Planet Zeus? If it is good for you, then you shall be there. when you build your system if your intention is to get energy that with it you don’t need to pay the bills anymore and you have more time to serve. Your system will work in no time. But if your intention is oh, I get the energy made, and excuse my French, I screw KF and I use this myself and I screw my nation and I don’t pay taxes and I have more… this system will not work. And then you call me a crook when the crookedness sits in your own soul and not understanding the work of what you are doing.

K: these systems are getting more and more connected to your school of thoughts. You touch it, you build it, it carries your emotions and with it, it carries the essence of your thoughts. Go back to the very first teachings. If you understand it, maybe they come home and as we say it is time for the eggs to come and hatch. I told you from day one, when you make a system pray for your system. Praying is giving and in giving the correct thoughts you shall receive the birds. We are coming to it very, very fast. Many of you will come and cry and say that your system doesn’t

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) work. Especially when you go into these bottle systems, into the gans and the fields. you have touched it and you carried your emotion to it. don’t forget about the mother and the child. It does not matter where the child is, the mother feels the emotion. The child is your touch and your amino acid you deposited on it.

K: this is what you have to learn; I have brought you in the position that there is no choice but correct conduct because you don’t get what you want unless you understand why you are wanting it and it is correct for you to have it. look at all the structure, look and understand the totality, look and understand what the system gives you and why it gives you and what you were expecting of it. Do I want gold to show off that I am rich, or do I want gold so I can pay and my soul is at ease? If your intention is to become rich you will never create gold. You will call me the guy is talking rubbish. And the guy whose intention is to make gold and prove that the technology is correct delivers. Because he knows with it, it will change a lot of things for people to understand that there is no respect for the metal or the matter.

K: That is why we see so much success with certain individuals work across the foundation. The soul is clear and you have not understood. Some of you are too busy not paying the electricity bill and just looking for the government to give you everything. who is going to put the police force on the street and who is going to keep the hospitals going when you are sick? Start, when you work with these systems, to change your ethos. The only person who can elevate your soul is you and nobody else. And in elevating your soul you elevate your physicality. In being able to share more and give more with the hope that you receive the strongest fields from those who have given and all the weakest fields have been spread on the ones who are weaker in intention. When I give my wish it is the same as what I explained with the north pole and the south pole. the energy at the top is the giver. The ones who are petty and want to take, they take from the weakest of the strongest of the fields of receiving. But the man who has full intention receives the most powerful energy and gravity. That is how the system works and that is how the sun creates its own fields. that is how you go in as the weaker and come out as the stronger.

There is no difference between the operation of the fields of the star, and the soul of the man and the physicality of the manifestation of his thoughts. If you understand this you don’t need to build a system, you can achieve everything that is your dream – that’s the attribute of the creator – detachment from physicality means I know I have what I want and I give as much as I have, because I know I receive stronger than I give in the strongest. There is no way you can separate theology (033121) and the ethos of the creation from the physics. MIT scientists, people from Cornell University, people from Yale, have said: “we accept Keshe technology” – I can show it to you in black and white – “but the problem with him is he brings theology into his work”. You lot in these universities are nothing but materialistic scientists because you don’t see the bigger

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) picture, that without it in space where we work with plasma, you are still stuck in the matter state. (033155) In the matter state then you need to go to Church and rob with your soul (?) because you are still stuck with it. With the plasma technology, when you understand the totality of it, you become your own prophet to correct your conduct. So we leave those scientists from Cornell, and other universities in America, whose response was “if he doesn’t talk about the ethos we accept his technology.” You lot have not even understood what is in the table, you are too physical worrying about the degrees, and the Porsches and the mistresses in the back street – shame on you!

033240 When you work in the plasma you have to understand the ethos of the plasma, then the plasma gives you what you want if the intention is correct. You cannot separate – it is not anymore “I do what I do behind locked doors!” Locked doors are the open scene for the soul of the man, and when you understand this, you understand theology, which is the conduct of the soul existing within the structure of the matter state, which without it cannot exist. Those who want half of it; let them be. We call them Professors at Yale University because that is the limit of their understanding, and as I said, with this technology, (033327) you take as much as you understand and no more. We don’t preach we teach; it is the student who due to his lack of understanding cannot see the totality. Work, set up your system clearly, but as what we’ve seen from our Chinese friend, understand what is the outcome of what you want – do you want leakage on one side? Or do you want absorption on the other side? How much do you want to give before you receive? If you set up your system to be a taker you find out you take nothing because you find it reaches balance so that it does not know what to give, so a full cup cannot take any more (033406)

033425: KS: So could we say that we’re trying to evolve our confidence in our intention?

K: Good morning!

KS: Good morning Mr. Keshe!

K: In KF when we say good morning it means you understood what we’re talking about!

Rick: That was a compliment indeed … well – sort of a compliment I guess … yeah!

K: It is that you understood, but if you can translate the understanding into the work of life?

KS: Well. Like a cook has a recipe, in my recipe for success, I want to examine what I’ve created to see how much of the recipe was the ingredient of intention by examining what I’ve created, if that’s a fair statement?

033525 K: In a way yes but if you want to see what you’ve created it depends on what you want out of what you’ve created; that’s the main part

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) KS: That’s what I was going to ask you about nano-coated aluminum… Every time I see nano coated aluminum it’s never really fully black

K: It cannot be

KS: That’s what I’ve created and I wanted to know; when I did create it I test it with a meter and it has infinite resistance so its acting like the SP3 diamond structure but I wanted to examine the process to build the confidence that my intention was more of an ingredient actually than the process.

K: In a way it depends on what you want to do with it at the end that counts. It’s in the writing of Baha’u’llah (bless his name) I’ve said it many times. Man has a soul, so does the animal, so does the tree, even the stone has a soul. It’s a field that itself has created its own field and it’s aware of the fields of your intention. This is what a lot of us miss in the whole teaching; we become too powerful. I saw the other side of the man in the past week which put me too shame – how the breath of energy brings a man to misconduct of the conducts. We don’t need to prove anything. All we need is to show the power of our will, which is correct to deliver what we want to do which is a peaceful action. It will come because the intention is there to come, but others are not maybe ready for it

KS: Well that’s why I hope to share some information and perhaps it could help other people to evolve a little bit.

K: With this new technology 7 billion of us have a lot to share with each other! What we have to learn from what we understand when we get enlightened, I said before, is to not put it on the paper, but write it with the pen of the soul. Those of you who are at the level, you will read. This is why we change the Council to the language, not the Nations, because nations don’t exist but the language is the line of communication and understanding of the emotion of the man, and this is what will count. (033814) You discover something and your intention is to share, write it with the pen of the soul. Those who want to understand will be enlightened and they will reverse back to you what they understood and you’ll receive more. In space there are no trees and in space there are no computers; the only line of communication is through the soul of the man. 033835. We cannot put cables across the universe to contact the others, and the faster the man understands this the faster we can achieve the level of understanding of the Universal Community.

KS: Then why such a struggle with the physicality?

K: It’s the choice of the man, but don’t forget man was created out of the physicality; it’s a cycle; conversion of energy to matter and conversion of matter back to energy. This time the energy is the soul of the man. (033916) if you go back to part of the medical teaching. Dr. Silva brought it out on the table clearly: when you die your body releases the equivalent of 18 Hiroshima bombs of energy. Where do you think that energy comes from? Gathered from the

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) physicality to add to the soul of the man! This is what a lot of us don’t understand. This is what we have missed in the whole structure and now more and more we come into liquid and field plasma we understand more and then it is for us to be the intermediary between our soul and our physicality, which means we control our emotion to be a giver by physicality, that with the hope that we receive in our soul level what is needed to be elevated with us. (034020) God is a giver because he knows when he gives he has more to receive

034030: K: shall we call it a day? We had a long time last night and we’re already almost 4 hours into the teaching. If we can use Paul’s teaching next week, we had a very long week this week on development in technology, and we spent 4 hours online.

KS: If I could just briefly describe the process quickly?

K: A few minutes, yes

KS: OK – About a year ago I was watching people trying to create nano coated aluminum, different processes came up and I never really saw a process that worked for me, and then I remembered when you clean sterling silver through a process where you put a piece of aluminum at the bottom of a pot, and then add baking soda to it, then you could put the silver in the water, and the silver oxide, or the tarnish, would go to the aluminum foil, so I tried to replicate that, so I took heaps of aluminum foil and put it in a stainless steel pot with a copper bottom, and put in the baking soda and the silver, and I brought it to a boil and let it simmer like a soup (034206) and then after about 6 or 8 hours all the aluminum sheets turned dark black, and I just wanted to know what that was. I’m not really a chemist so I wanted to know is this electrolysis or something else? – but I found when I tested the aluminum nano coating it showed the resistance was infinite. So that was the data I got but I just did not know how to explain it, or how much my intention was part of that recipe that was successful?

(034250) K: Maybe partially but on the other hand you have to understand when you create these kind of conditions you create multi layers. Aluminum (nano coating) most of the time you see greyish, not really black; it’s because of its atomic structure when it converts into plasma it does not create a tight pack to absorb all the lights from the environment and that’s the problems with it. The structure of packing is too loose with respect to the atmospheric plasmatic condition, where with copper it becomes very tight and there is no energy, everything goes through. With aluminum because of its plasmatic structure field you don’t have that, so you don’t absorb all the lights. It doesn’t mean you haven’t created a nano material or the Gans of it, it’s just the spacing of it that’s the problem. It’s not a problem, it just creates a different light. (034346)

KS: But this was as black as nano coated copper

K: Yes, it’s because you have created a condition that is a composite, or due to the fields you created you have enforced external conditions internally in the layers that allow the external layers. If you shave it, you come back to grey. If you just scratch it that you can get the top layers

(v3 2017-09-16) DRAFT (Transcription has not been verified. Double check info with video) off, you disturb the field forces; you will get the same colour as before. This is how you make filtering.

KS: Yes, I also noticed some places looked porous – it was translucent but the material was still there …

K: This is the spacing – you have to understand positioning in the atomic structure. Thank you very much. Our Chinese friend that made this drawing we have on the screen can you please come back when you made this unit, hopefully next week and share knowledge with us. And Paul we put you on the early part of next week. Thank you very much, thank you for sharing knowledge with us.

Rick: Thank you Mr. Keshe. We can also bring up with more detail what Stanley wanted to share about the transcriptions being done on the blueprint explanation – you can find that on the Kf YouTube site in 7 different languages – that’s 11 minutes that shows the blueprint explanation from MK 034550 OK we should sign off for now – it’s been a long workshop here, so let me finish with the screen share 034613: Thank you everybody for attending the 133rd Knowledge Seeker workshop for Thursday 18th August 2016. Lots of questions still out here – save them for next week and we’ll continue with more answers from Mr. Keshe.