Thank You Very Much for Choosing AMOI H9, the Fashionable and Elegant Camera Phone, Especially

Total Page:16

File Type:pdf, Size:1020Kb

Thank You Very Much for Choosing AMOI H9, the Fashionable and Elegant Camera Phone, Especially

User Manual Dear Customer,

Thank you for purchasing. Kindly read this user manual carefully to learn about key functional characteristics and operational methods of this mobile phone.

Safety and Precautions: To use your phone safely and effectively, please read the following information before use:

Please turn off your phone when you are near a chemical plant, a gas station, an oil depot or other explosives.

To ensure safety, please use earphone during driving; Otherwise, unless emergency, make a call after parking your car by the roadside. DO NOT use the phone during driving at high speed.

Do not use your cell phone while in a plane. Please check whether Flight mode is set or not before boarding.

Do not use your cell phone in a hospital to avoid interference with the normal operation of medical equipment which may result in a medical accident. If the cell phone is used near a pacemaker, audiphones and some medical electronic equipment, you should pay special attention that the cell phone may interfere with these devices.

Auxiliaries and accessories not provided by us are excluded from the guarantee.

Do not dismantle your cell phone by yourself. In case of a failure, please contact the service station specified by us. Only qualified person may install or repair this product.

The phone should be charged in the environment which is well-ventilated, and should be kept away from inflammable substances and explosives. To avoid demagnetization, please keep your phone away from magnetic substances, such as magnetic disk, credit card, etc.

Please be sure the phone isn't exposed to any liquid. In Case this situation occurs, please remove the battery and contact the service station specified by us. Please use your phone in the environment which is neither too hot nor too cold, do not expose your phone in strong sunlight and in high-humidity environment.

II All wireless devices may be susceptible to interference, which could affect performance.

Your cell phone has photo and record functions, please use these functions following the related laws and regulations. You may violate the laws and regulations if you take photos and record without authorization.

 Do not dispose the worn battery as common domestic rubbish. Please dispose the worn battery according to the specified instructions where the disposal of a worn battery is clearly specified.

Note: The Company will not undertake any responsibility for any consequences caused by failure to observe the above Mentioned suggestions or improper applications.

If any content described in this manual goes against that of your cell phone, it is subject to the real cell phone.

X1 operates a policy of continuous development. X1 reserves the right to make changes and improvements to any of the products described in this document without prior notice.

The availability of particular products may vary by region. Please check with the X1 dealer nearest to you. Contents 1.Getting to know your phone...... 1 1.1 Your Phone...... 1 1.2 Status icons...... 1 1.3 Installing SIM card and battery...... 1 1.4 Installing Storage card...... 1 1.5 Battery charging...... 2 1.6 Power on/ off...... 2 1.6.1 Power on...... 2 1.6.2 Power off...... 2 1.7 Using shortcut keys...... 2 2.Using Call Function...... 2 2.1 Making a call...... 2 2.2 Answering or rejecting a call...... 3 2.2.1 Answer a call...... 3 2.2.2 Reject a call...... 3 2.3 Adjusting call volume...... 3 2.4 Ending a call...... 3 3.Call logs...... 3 3.1 Dialed calls...... 3 3.2 Received calls...... 3 3.3 Missed calls...... 3 3.4 Rejected calls...... 3 3.5 Delete all...... 3 3.6 Call timers...... 3 3.7 Call cost...... 3 4.Contacts...... 3 4.1 View a contact...... 3

-I- 4.2 Adding a new contact...... 4 5.Alarm...... 4 6.Multimedia...... 4 6.1 Camera...... 4 6.2 Video recorder...... 4 6.3 Audio player...... 4 6.3.1 Background audio player...... 4 6.4 Video player...... 4 6.5 Recorder...... 5 6.6 FM radio...... 5 6.7 File manager...... 5 7.Message...... 5 7.1 Write message...... 5 7.2 Inbox...... 6 7.3 Outbox...... 6 7.4 Drafts...... 6 7.5 Sentbox...... 6 7.6 Message setting...... 6 7.6.1 Templates...... 6 7.6.2 Voice mail server...... 6 7.6.3 Broadcast message...... 6 7.6.4 Settings...... 6 7.6.5 Message capacity...... 7 8.Tools...... 7 8.1 Bluetooth...... 7 8.2 Calendar...... 7 8.3 Calculator...... 7 8.4 World clock...... 8 8.5 Torch...... 8 9.Application...... 8

II 9.1 Sokoban...... 8 10.File manager...... 8 11.Settings...... 8 11.1 Dual-SIM...... 8 11.2 Call settings...... 8 11.2.1 Network selection...... 8 11.2.2 Call divert...... 8 11.2.3 Call barred...... 8 11.2.4 Call waiting...... 9 11.2.5 Hide ID...... 9 11.2.6 Select line...... 9 11.2.7 Flight mode...... 9 11.2.8 Others...... 9 11.3 Phone settings...... 9 11.3.1 Time & date...... 9 11.3.2 Select language...... 10 11.3.3 Shortcut settings...... 10 11.3.4 Auto power on/off...... 10 11.3.5 Power management...... 10 11.3.6 Restore factory settings...... 10 11.4 Display settings...... 10 11.4.1 Wallpaper settings...... 10 11.4.2 Idle screen style...... 10 11.4.3 Contrast...... 10 11.4.4 Backlight...... 10 11.4.5 Keypad backlight time...... 10 11.4.6 Animation effect...... 10 11.5 Security settings...... 10 11.5.1 PIN...... 10 11.5.2 PIN2...... 11

-III- 11.5.3 Privacy...... 11 11.5.4 Auto keypad lock...... 12 11.5.5 Lock screen by end- key...... 12 11.5.6 Power-on password...... 12 11.5.7 Mobile tracker...... 12 11.6 Profiles...... 14 11.6.1 Normal...... 14 11.6.2 Silent...... 14 11.6.3 Meeting...... 14 11.6.4 Indoor...... 14 11.6.5 Outdoor...... 14 12.Safety Precaution...... 14 12.1 Usage environment...... 14 12.2 Medical devices...... 14 12.2.1 Pacemaker...... 15 12.2.2 Hearing aids...... 15 12.2.3 Emergency calls...... 15 12.3 Password access...... 16 12.3.1 Phone password...... 16 12.3.2 PIN code...... 16 12.3.3 PIN2 code...... 16 12.3.4 PUK code...... 16 12.3.5 PUK2 code...... 16 12.4 Cautions for battery charging...... 17 12.5 Cautions for battery usage...... 17 12.6 Cautions for spare parts usage...... 18 12.7 Other safety information...... 19

IV 1. Getting to know your phone 1.3 Installing SIM card and battery 1.1 Your Phone (1) Hold on 【End Key】 for about three seconds PLEASE GIVE THE PHONE IMAGE. to switch off the phone. (2) Remove the battery cover. 1.2 Status icons (3) Remove the battery. (4) Follow the sign for SIM1 and SIM2 on the Icon Function description phone to install SIM1 and SIM2. Please make Represent current SIM1 and SIM2 sure that the golden contacts of the card face network signal. The more bars, the into the phone and the notched corner has stronger the signal the same direction with the card slot, then push the other side of the card gently until it Flight mode fixes itself in the card slot. (5) Replace the battery with its golden contact Battery status, more bars indicate part facing the set phone battery contact more battery capacity left piece, and then replace the battery cover. Unread SMS 1.4 Installing Storage card Clock has set (1) Hold on 【End Key】 for about three seconds to switch off the phone. Bluetooth function is activated (6) Remove the battery cover. Profile has set as Silent Mode (7) Remove the battery. Profile has set as Indoor Mode (8) Follow the arrow direction of "OPEN" on the Memory Card slot cover, open card slot Profile has set as Outdoor Mode cover, put the Memory Card into the slot Profile has set as Meeting Mode vertically, and make sure that the gold

-1- contacts of the card face upwards, until the card fixes itself in the card slot. Warning: (9) Follow the arrow direction of "LOCK" on the Don’t switch the phone on in areas where Memory Card slot cover; pull card slot cover wireless phone usage is prohibited or where to lock the card slot. it may cause interference or danger, and also make sure that you haven’t activated the 1.5 Battery charging function “Auto power on/off”. Charged by the travel charger (1) Install the battery correctly into the phone. 1.7 Using shortcut keys (10) Insert the lead of the travel charger to Pressing some keys directly from the Home connecting slot of the phone, and then Screen provides direct access to common phone connect the charger to a standard power functions. socket. Key Operation Function When charging is complete, unplug the charger from the standard power socket first, and then Call press Enter Call History disconnect the phone and charger. key briefly hold on Enter voicemail box 1.6 Power on/ off 1 Key for SIM1 or SIM2 1.6.1 Power on Hold on【End Key】for three seconds to switch on the phone. 1.6.2 Power off 2. Using Call Function Hold on【 End Key】for three seconds to switch off 2.1 Making a call the phone. (1) On the Home Screen, input the area code and phone number.

2 (11)Select to select SIM1 or SIM2 to Display recent calls unpicked up. call. 3.4 Rejected calls 2.2 Answering or rejecting a call Display recent calls rejected. 2.2.1 Answer a call When there is an incoming call, you can press 3.5 Delete all 【Call Key】to answer. Delete all the call entries. 2.2.2 Reject a call 3.6 Call timers When there is an incoming call, you can press Select the desired SIM Card, and then you can 【End Key】to reject it. view all relevant information about the SIM Card. 2.3 Adjusting call volume 3.7 Call cost (need the network During a call, you can press 【Navigation Key】 to support) adjust the earphone volume.  Total cost: Record total call charges for SIM1 2.4 Ending a call and SIM2.  Max cost: You can set the desired upper limit Press 【End Key】 to end the call. for call costs.  Price per unit: Record the cost rate for SIM1 3. Call logs and SIM2. Enter the main menu, and then select [Call logs]  Reset cost: Reset the total call charges as to enter the call list. zero. 3.1 Dialed calls 4. Contacts Display recent calls dialed. 3.2 Received calls 4.1 View a contact Display recent calls received. Enter the phonebook, the phone is defaulted to show contact list with all entries. Press 【 Left

-3- Key/Right Key 】 to switches between different 6.2 Video recorder groups. Enter the main menu, and select 4.2 Adding a new contact [Multimedia→Video recorder] to enter the video On the Contacts list, selectto preview screen, and press 【 OK Key 】 to start create a new contact. recording the video.  Phone: You can input the contact name, 6.3 Audio player mobile phone, home phone, etc. You can also On Home Screen, press 【Left Soft Key】 to enter set special image and ring for the contact the main menu, and select [Multimedia→Audio entry. player] to enter the Audio Player screen.  SIM1: The input record will be saved to SIM1, The below table shows the icons on the Player with each name one phone number. screen:  SIM2: The input record will be saved to SIM2, with each name one phone number. Icon Description 【 】 5. Alarm / Press OK Key to play or pause Press【Left/Right Key】to skip to On the Home Screen, press【Left Soft Key】 to / last /next one enter the main menu, and select [Alarm], then you can set the alarm name, time, ring and mode. Show the playing volume, press 【Up/ Down Key 】to adjust the 6. Multimedia volume 6.1 Camera Enter the main menu, and select 6.3.1 Background audio player [Multimedia→Camera] to enter the camera While playing a song, press 【End Key】to quit the preview screen, press 【OK Key】to take a photo. Playing screen to enter the background playing mode.

4 6.4 Video player press【Left Soft Key】 to enter the main menu, Enter the main menu, and select then select [Multimedia→FM radio]. [Multimedia→Video player]. Icon description: Icon description: Icon Description Icon Description Press 【Down Key】to activate or deactivate the Press【OK Key】to play or pause / radio

/ Press【Left/Right Key】to skip to Frequency scrolling bar, last /next one press【Left/Right Key】to adjust the frequency Show the playing volume, press 【 】 【 】 Up/ Down Key to adjust the / Press Left /Right Key to volume adjust the radio frequency. Display the player volume, 6.5 Recorder Press【*Key】or 【# Key】to adjust it On Home Screen, press 【Left Soft Key】to enter the main menu, select [Multimedia→Recorder], and choose to start 6.7 File manager recording. Select to have the recording pause for a while, select to cease This menu allows you to manage files stored in recording. After ceasing the recording, the the storage card. recorded file will be automatically save in the folder [Audio], select to check. 7.1 Write message 6.6 FM radio On the Home Screen, press【Left Soft Key】and On standby mode, plug in the earphone,

-5- select [Message→Write message] to edit a new 7.6.2 Voice mail server SMS directly. After writing an SMS, select to send the message. which can transfer a missed call to your personal 7.2 Inbox voice mail, allowing the caller to leave a voice message and notify you by an SMS. Voice Mail is Store all received SMS. a part of the bundled software provided by 7.3 Outbox network operator, therefore, you need to register Store all SMS failed to be sent. to active this function, and manually set the phone. Please contact with your network operator 7.4 Drafts for more details. Save edited SMS haven’t sent. 7.5 Sentbox Caution: Store all the SMS successfully sent out. If you It’s workable to transfer the voice call into the want the sent messages be saved automatically, voice mail (The number the call will leave a please select message) by setting “Divert calls”. [Message→Options], then select [Settings→SMS→Save sent messages→Save]. 7.6.3 Broadcast message You can receive broadcast text messages with 7.6 Message setting various contents via network service, such as On the Home Screen, press 【Left Soft Key 】to news, weather or traffic information. For more enter the main menu, then select details, please consult your network operator. [Message→Options] to enter the message 7.6.4 Settings setting menu. SMS 7.6.1 Templates  While editing messages, you can directly cite the  SIM1 msg center: While sending preset common phrases. Select to set the messages, you must set the service center common phrases by yourselves. number provided by network operator. Most SIM cards defaulted contain the service

6 center number. You can also gain this this function. number directly from the network operator. 8. Tools

Caution: 8.1 Bluetooth If you modify or delete the service center  Open/Close Bluetooth: This function allows number, an SMS might not be sent you to switch the Bluetooth on or off. successfully.  Bluetooth visibility: Set to show or hide the Bluetooth of your phone. If you select to hide  SIM2 msg center: Please refer to [SIM1 the phone, other devices cannot detect the msg center]. Bluetooth device of your phone; even you activated your Bluetooth function.  Message validity period: Allows you to set  Paired device: You can search for the nearby the length of time during which your SMS Bluetooth-enabled devices. will be stored in the message center. The validity period depends on the network  My bluetooth name: If Bluetooth function operator. activated, while other devices search for Bluetooth signal, the corresponding name  Status report: Select [On], and then the represents your phone. text message center will inform you when  Bluetooth file storage: Able to set the you successfully sent a message. storage location for files received via  Save sent messages: You can select Bluetooth. whether to save the sent message or not. 8.2 Calendar  Preferred storage: You can select to save Enter the main menu, and select the SMS to the SIM card or the phone first. [Tools→Calendar] to enter the Calendar  Broadcast message screen. 7.6.5 Message capacity 8.3 Calculator You can view memory capacity status for SMS via Directly input numbers, press【Navigation Key】 to

-7- select your desired operation symbols (+, -, /, X). card standby, or to have both SIM cards Press 【OK Key】 to get the answer. standby simultaneously. 8.4 World clock  Reply by original SIM: You can activate the function to reply from current SIM card for call This function allows you to check the standard and SMS. time in different areas of the world.  Set SIM name: You can name the Card as 8.5 Torch you want. You can activate or deactivate the flashlight 11.2 Call settings function. 11.2.1 Network selection 9. Application  Auto select: The phone can automatically search and register available networks. 9.1 Sokoban  Manual select: Enable this function, the Push all the boxes to the destination , and phone will search for the network, and list all searched networks, then you need to choose then you can go to the next game level, press the one needed to register. 【Navigation Key 】 to move the snail. 11.2.2 Call divert Based the set diverting conditions, incoming calls 10. File manager will be forwarded into voice mail or other numbers. This menu allows you to manage files stored in 11.2.3 Call barred the storage card. This function helps you to restrict the incoming 11. Settings and outgoing calls. Select the desired call and press , then you 11.1 Dual-SIM can select [Activated], [Off] or [Query status]. Select [Activated], the phone will need network  Standby mode: You can select the standby support current setting. mode for SIM card, either to have one SIM

8 not for the receiver depends on the network presetting. Caution: 11.2.6 Select line 1 . some network operators forbid the You can choose Line 1 or Line 2 as you need. function. For more details, please contact your network service provider. 11.2.7 Flight mode 2. The network operator will provide you the  Activate: Activate flight mode, and then all initial network password while you apply for network service won’t be available. this service.  Select when power on: You can select whether to activate flight mode when power 11.2.4 Call waiting (Need network support) on.  Activated: If you set the function on, the 11.2.8 Others network will alert you that there is an incoming  50 secs warning call. You can keep current call and answer If you activate the function, an elapsed time another one. reminder will be heard at the 50th second of every  Off: Cancel call waiting function, then the new minute during your call, so that you may end the incoming calls won’t be answered while you’re call timely to save the phone fare. on the phone already.  Vibration when connected  Query status: Select it to view current status The phone will vibrate to prompt you when the of this function. recipient answers your phone. 11.2.5 Hide ID (Need network support)  Answer/Reject mode  Hide ID: While calling, the recipient won’t see your phone number. Reply SMS after reject: You can select whether to reply an SMS after rejecting a  Display own ID: While calling, your phone call. number will be visible for the recipient.  Display ID by network: While calling,  Auto redial whether your phone number will be visible or If you set this function on, the phone will redial the number after an unsuccessful call,

-9- 11.3 Phone settings 11.4 Display settings 11.3.1 Time & date 11.4.1 Wallpaper settings  Set time: Directly input the time or press Select the default or other pictures as the 【Up /Down Key 】to set it. wallpaper of the phone.  Set date: Directly input the date or press 11.4.2 Idle screen style 【Up /Down Key 】to set it. ”Standard style” and “Smart style” are available. 11.3.2 Select language 11.4.3 Contrast You can select the language you want. Press 【Left /Right Key】to adjust the contrast. 11.3.3 Shortcut settings 11.4.4 Backlight  While the Home Screen is smart style, you Select the desired backlight time. can change the shortcuts on Home Screen via 11.4.5 Keypad backlight time this. Select the desired keypad light time.  While the Home Screen is standard style, you can change the responsible shortcuts for 11.4.6 Animation effect 【Navigation Key 】under standby mode.  Power on display: You can select the preset 11.3.4 Auto power on/off animation or others as the Power on animation for your phone. You can set the phone to switch on/off at a scheduled time.  Power off display: You can select the preset animation or others as the Power off animation 11.3.5 Power management for your phone. Display the battery capacity. 11.5 Security settings 11.3.6 Restore factory settings In order to secure the information, you can set Reset all parameter values into default status. PIN code, PIN2 code, power-on password and Please enter the privacy preserving password Mobile tracker function. (Initial password is 1234) to resume factory setting. 11.5.1 PIN PIN code is the personal identification number for 10 SIM card. If never be modified, the initial password set by network operator should be 1234 Caution: or 0000. If activated the power-on PIN code, then Please be careful when use this function. If you have to input the PIN password each time you forget PUK code, please consult your you switch the phone on. You can modify the PIN network operator. If you incorrectly input the code to prevent your SIM card being used by PUK code ten times in succession, the SIM others. card will be scrap.

Caution: Select the desired SIM type and have the If you input your PIN code incorrectly three following options: times in succession, the SIM card will be  Activated: You should input PIN code each locked automatically, and prompting to enter time switching the phone on. PUK code to unlock it. Therefore, please do remember the PIN code, if you modify it.  Modify: You should activate PIN code before modifying it. PUK code (PUK1) is made up by 8 digits,  Off: You should input the correct PIN code unmodifiable. When the phone is locked by PIN before deactivating it. code, please enter correct PUK code to unlock 11.5.2 PIN2 the phone. If you incorrectly input the PUK code PIN2 code is the personal identification code ten times in succession, then the SIM card cannot required for some certain functions (such as set be used any more. Some PUK codes are fixed number, set phone fare, etc). provided together with the SIM card, some should PIN2 code is another password provided together be gained from the network service provider. If with SIM card by service provider. If wrongly input you don’t know t he PUK code while your PIN it for three times in succession, the phone will be code is locked, please never input the code locked until correct PUK2 code entered, for casually. In this case, please call the hotline of the detailed operation, please refer to PIN code and service provider for your SIM card, after simply PUK code. checking about the user identity, you can gain the PUK code for free to unlock your phone. Caution:

-11- If you incorrectly input the PUK2 code ten 11.5.6 Power-on password times in succession, you will not be able to You should set the power on password when you use SIM card. Please be careful when use use this function for the first time. After activated this function. this function, you should input password each time you switch the phone on. 11.5.3 Privacy Secured by phone password, the phone will be Caution: protected from other unauthorized users. When Power-on password doesn’t have the password function has been activated for call logs limitation for wrongly inputting. Please or message, you have to enter correct password remember carefully about the Power on on corresponding main menu or sub-menu. The PWD, otherwise, the phone won’t be defaulted password is “1234”. switched on normally once password 11.5.4 Auto keypad lock forgotten. After activating this function, the phone will be locked automatically if the time you set is arrived, 11.5.7 Mobile tracker so as to avoid error operations. Mobile tracker is nicknamed as Mobile Phone  Manual lock keypad: On the Home screen, Dog. When others illegally use your phone, press 【Left Soft Key】, then press【* Key】 to information like CELLID of the phone will be lock the keypad manually. collected and sent to preset mobile phone; moreover, the function will prevent others to use  Manual unlock keypad: On the Home the phone after certain times or certain power-on screen, press【Left Soft Key】, then press【* times. Key】 to unlock the keypad manually. This function is defaulted to be off. To activate it, 11.5.5 Lock screen by end- key please modify the password. Then you need to Once activated this function, when the backlight is enter the password if you want to activate, on, press【End Key】to turn off the backlight and deactivate, or modify the password to process auto lock the keypad. operation, and the password has 6 digits. To activate it, you have to enter a preset mobile phone number (The mobile phone number set to 12 receive the message if the phone is stolen) apart from the password. Caution: After activated, the phone stores the IMSI number Please report to the police timely if the phone for original SIM card, which is sole and unique, if is stolen, but this doesn’t mean that the lost you insert another SIM card, there will be a phone will be definitely traced back. prompt, asking you to input the guardlock Therefore, please take care of your personal password. If you wrongly enter the password for property. three times in succession, the phone will default it as illegal and display a relevant prompt, then If the phone defaults the SIM card inserted is collect and send information like CELLID, LAC, illegal, then guardlock function can not be MCC, MNC, MCN to preset mobile phone activated, and relevant setting can not work. If number. While receiving this message, legal user another SIM card is inserted, enter correct can report it to the police, who can inquire the password, message count will be sent from zero, illegal usage situation (Including the used meanwhile, there will be a prompt, asking you location, call history, etc) from network operator whether to bind this SIM card. Select binding, via the piece of information. then the phone will renew the IMSI number and The message will be kept senting to the preset default the SIM card as the designated one. mobile phone till it is successfully received. If the  Activated: Before activating this function, stolen phone is on over 24 hours or re-switch on, please set the password first, if password the phone will resend a message to your preset hasn’t been set, then please enter [Change phone number. When the message has been password] to finish the password setting and successfully sent up to 15 times, any illegally back to activate this function. While activating used SIM card won’t work in the stolen phone, it, guardlock password and notified mobile which will automatically switched off. phone number (The number to receive the information of the SIM card illegally used in the stolen phone) are required. After these, guardlock function will work.  Off: To deactivate guardlock function, you should input correct Guardlock password.

-13-  Change password: Modify guardlock password. 12. Safety Precaution

Warning: 12.1 Usage environment Please use this function carefully. The phone Please remember to obey relevant rules and won’t be used if password forgotten. regulations whenever use your phone. This will prevent bad effect from you and the environment. 11.6 Profiles  Switch off your phone near explosive places, 11.6.1 Normal such as gas station, bunkers, chemical  Activate: Activate the chosen profile. factories or blasting scene, and adhere to any safety signs and instructions there. Breaking  Customize: Set the options as required. any rules may cause explosion or injury.  Rename: Modify the name of the selected  Phone using in plane will interfere with the profile. flight operation and bring dangers. Therefore, 11.6.2 Silent please do switch off your phone before For the settings, please refer to”Normal”. boarding, and make sure it is power off during 11.6.3 Meeting the whole flight. For the settings, please refer to”Normal”.  Please keep the phone in its special bracket while you’re driving. Please don’t put it on a 11.6.4 Indoor seat or in places where it could fall off when For the settings, please refer to”Normal”. the car encounters collision or break. In order 11.6.5 Outdoor to ensure safe driving and avoid road accidents, please don’t use the phone when For the settings, please refer to”Normal”. driving. If you must use it, please use the phone’s hands-free asset or park at roadside before making or answering a call.

14  Please put the phone away from the high temperature environment, for explosion might be caused when the battery is of excess high Caution: temperature. Please switch off your phone while you feel 12.2 Medical devices there is interference, and consult the doctor timely. Please switch off your phone in areas near the electronic medical equipments that obviously 12.2.2 Hearing aids requires switching the phone off (Such as heart pacemakers, hearing aids, etc). Most medical Mobile phone might bring some interference to devices can shield the phone’s RF signal, but some hearing aids. If so, please consult the some can’t. If you have any doubts or need to find hearing aids manufacturer. out more, please consult your doctor or medical 12.2.3 Emergency calls device manufacturer. As the phone uses a radio signal, wireless and 12.2.1 Pacemaker ground communication network and personal Pacemaker manufacturers advise the distance settings functions like other phones, it is between your phone and heart pacemaker should impossible to ensure your phone can be be 6 inches (15.3 cm) at least, otherwise the connected successfully in any situation, so please phone could interfere with the pacemaker. don’t rely purely on your phone as the only means of notification in cases of emergency (such as The personnel who wears pacemaker should medical first aid ). do the followings: Make an emergency call  Should always keep a distance (at lease 6 inches) between the phone and pacemaker, If your phone is switched off, please turn on your when the phone is switched on. phone and check whether the network signal is  Should not have the phone in a breast strong enough. pocket (1) Input the local first aid number correctly (such  Should listen to the phone closer to the ear as 120), different areas have different first aid which is farther from the pacemaker. numbers.

-15- (12) Please press the call key to call. Caution: Caution: If you input your PIN code incorrectly for While making an emergency call, you should three times in succession, the SIM card will try best to provide all important information be locked. You need to enter the PUK code precisely. At this time, the phone may be the to unlock it. (If you don’t have a PUK code, only communication tool, so don’t end the call please contact your network operator or SIM without permission. card retailer for this information. Please don’t input any characters). 12.3 Password access 12.3.3 PIN2 code Your phone and SIM card can be protected by a This is the password for activating special password to prevent others using them illegally. functions of the SIM card. You need to input it 12.3.1 Phone password while entering some functions (eg.Charge Unit, This protects your phone from unauthorized Fixed Dialling etc). Usually, the PIN2 code and users. You can set the preset password when you the SIM card will be provided together. If you use it for the first time. After using it, please incorrectly input the PIN2 code for three times in modify your phone password as soon as possible succession, it will be locked and you will need to and keep it secret. input PUK2 to unlock it. 12.3.2 PIN code 12.3.4 PUK code This is personal identification code, which is used This is used to unlock the PIN code. Usually the to protect the SIM card from unauthorized users. PUK code and SIM card are provided together. If Generally, the PIN code and SIM card will be you don’t have it, please contact with your provided together. After activating the PIN code, network operator or SIM card retailer. SIM Card you need to input correct password each time you won’t be used any more, if you incorrectly input switch the phone on to ensure normal usage. the PUK code ten times in succession. In that case, please apply a new SIM card from your network operator. PUK code is unmodifiable.

16 12.3.5 PUK2 code (whether switched on, making a call), This is used to unlock the PIN2 code. Usually the usually, it will take about 2-5 hours. PUK2 code and the SIM card are provided 2. To make the new battery achieve its best together. PUK2 can modify the locked PIN2 code. capacity, please charge and discharge the If you incorrectly input the PUK2 code for ten phone for twice or three times. Please times in succession, you will not be able to charge the new battery over 10 hours for the access some functions. Please apply to your first several times. operator for a new card. The PUK2 code is unmodifiable. If you lose it, please contact your  Don’t use wet hands to touch the battery or service provider. charger while charging in order to avoid 12.4 Cautions for battery charging danger. The phone provides power by using a lithium  Try not to use the phone while charging. battery. The standby time and call time will be  The battery icon stops scrolling while the influenced by the system’s environment and battery is full, and then you can disconnect the phone settings. phone from the charger adapter.  Please use the approved battery and charger 12.5 Cautions for battery usage designated for this product. The company will The battery usage depends on the network, take no responsibility for damage caused by phone setting and usage situation. unauthorized battery or charger.  Never use any damaged battery.  The battery icon will start scrolling when the phone is charged in power-on-state.  The phone will consume a little power if it is near network station. Therefore, the call and standby time depends greatly on the signal strength of honeycomb network and the Caution: parameters set by network operator. . 1 If there is no battery left at all, and then  The battery charging time lies on the remnant the battery icon will appear after 2-3 minutes power, and the type of the battery and of charging. The battery charging time charger. When the operation time (talk time depends on the status of the phone

-17- and standby time) is noticeably shorter than  If your phone, battery or other charging device normal, it is time to replace with a new battery. is accidentally penetrated by water, you must  Only use batteries and charges authorized for not put it inside any calefaction equipment this device, otherwise, explosion might be (such as drier, microwave oven etc.) to dry it. caused. Please disconnect the charger while The phone or other products may go wrong, unused. Do not leave the battery connected to and may even cause the phone, battery or a charger over one week, for overcharging other charging device to burn, expand and may shorten the life length. explode.  Do not connect the anode and cathode of a  Please deal with the discarded battery battery inversely. according to the relative introduction.  Do not leave the battery in places with over- The company will take no responsibility for any high or over-low temperature, otherwise, the direct or indirect damage caused by user error. battery capacity will be reduced and battery life will be shortened. Always try to keep the 12.6 Cautions for spare parts usage battery in room temperature.  Please put all spare parts (such as SIM card,  Do not short-circuit the battery. This may storage card, battery etc) out of reach of damage the electronic core or internal children, in case danger occurs. protected circuit. If you keep the unused battery in the pocket or bags, metal objects  Please do switch off the phone and unplug the (eg. coin, clip or pen, etc) inside might have phone and charger before you removing the the anode directly contacted with the cathode battery from the phone. of the battery and caused accidental short  As the phone’s spare parts are not waterproof, circuit. Therefore, please carefully and please keep all spare parts dry. separately store the battery.  You should pull out the plug of any spare part  Don’t burn your phone battery or treat it as correctly when you switch off the power, don’t common rubbish. Please adhere to the local drag the power line forcibly. environmental policy in order to avoid endangering life and causing environmental If the phone, battery, and charger don’t operate damage, and recycle your batteries in time. normally, please contact closest qualified 18 maintenance centres timely. 12.7 Other safety information  If you don’t use your phone, it’s better to switch it off and remove the battery so as to save energy and avoid cellular radiation.  Please don’t have the volume over loud while using the phone, which might impair your hearing.  The unprofessional shouldn’t disassemble the terminal and battery of the phone.  It is recommended that you should try not to use the holster with magnet button, for the magnet may interfere with the phone signal, and hard iron button may crush the LCD screen. Plastic phone cover will lead to poor volatilization of vapor and have the internal components corrupted, moreover, it can have the phone shell oxidized and faded.  If you or your family has a medical record of dizziness or epilepsy, please consult with the doctor first, if you want to play phone games or use the flashlight (the flash doesn’t available in all phone models).  Please don’t put the flashlight too close to the eyes of human beings or animals, as this could do harm to the eyes.  Should avoid the phone falling off from high places.

-19-

Recommended publications