Shake Well Before Using

STIMULATE 8 - 16 - 4 Plus Trace Elements A FOLIAR FEED FOR AG. AND COMMERCIAL USE ****************************************************************** SHAKE WELL BEFORE USING Why use foliar feed fertilizer? Foliars may be 100 to 500 percent more efficient than conventional soil applied fertilizer. Stimulate may provide major and minor nutrients as a foliar feed in an organically based liquid Humic Acid extract. COMPATIBILITY Stimulate is compatible with most commonly used fertilizers, nutrients, pesticides, fungicides, and herbicides. Properly applied it may be used on all crops, trees, vines, lawns, flowers, and ornamentals. CAUTION: Do not mix with selective or pre-emergent herbicides. 0.K. to mix with non- selective contact herbicides. USE AND APPLICATION Turf: Foliar apply 1 gallon of Stimulate per 12,000 sq.ft. by sprinkler or back pack sprayer once a month or as needed to maintain desired appearance. Dilute at a minimum rate of 10 gallons of water per 1 gallon of Stimulate and a maximum of 50 gallons of water per 1 gallon of Stimulate. To spoon feed through a drip system adjust injection system to apply 1 gallon of Stimulate per 12,000 sq.ft. At overseeding you may apply up to 3 gallons of Stimulate per 10,000 sq.ft. if no other fertilizers are being used. If hydra-seeding is being used add 1 gallon per 250 pounds of seed in slurry. Trees and Vines: Foliar apply 2 gallons of Stimulate per acre on established orchards or vineyards prior to first bloom and an additional 2 gallons after bloom. For home owners apply 1 pint of Stimulate per tree or 1 pint per 10 vines. Always dilute a minimum of 10 parts water to 1 part Stimulate and a maximum of 50 parts water to 1 part Stimulate. Row Crops: Foliar apply 1 to 2 quarts of Stimulate per acre depending on maturity of crop. Repeat as many times as necessary during the growing season. Ornamentals: Foliar apply 1 pint of Stimulate per 200 sq.ft. of bed. Do Not foliar apply when ornamentals are blooming. Instead water run or inject through drip system 1 pint of Stimulate per 200 sq.ft. of bed. NOTE: For optimum uptake, apply early in the morning or late in the evening. Try to avoid applying during the heat of the day if possible. GUARANTEED ANALYSIS Total Nitrogen (N) 8% Derived from potassium nitrate, ammonium phosphate, Available Phosphate (P2o5) 16% iron sulphate, chelated zinc, chelated manganese, Soluble Potash (K2o) 4% magnesium sulphate. Sulphur .30% Contains Non Plant Food Ingredient Zinc .12% 1% Humic Acid Minimum derived from Leonardite. Iron .30% Manganese .03% KEEP AWAY FROM CHILDREN Magnesium .03% Density: 10.8 LBS PER GALLON @ 68 degrees F. 2.5 or 5 gallon containers 1.28 KG PER LITRE @ 20 degrees C. 9.5 or 18.9 litre containers NOTICE: Buyer assumes all risks of storage, use, and handling. Neither seller not its agent make any warranty expressed or implied concerning this product except in conformity with this label. Manufactured By: THE CATALYST PRODUCT GROUP, 6267 N. Anderson Rd., Stanfield Az 85272 ( 480-814-8318 )