FLAIRLINE Autocad* PRODUCT CATALOG (VERSION 7/17/97)

Total Page:16

File Type:pdf, Size:1020Kb

FLAIRLINE Autocad* PRODUCT CATALOG (VERSION 7/17/97)

AutoCAD* DRAWING FILES ROUND BODY CYLINDERS AND VALVES -INSTRUCTIONS-

The Flairline AutoCAD drawing files reflect the contents of the Cylinders and Valves catalog. These files are designed to meet the needs of customers who can install DWG. files compatible with AutoCAD* version 12, or .DXF format. The information provided on this page is also available on the disk by bringing up ROUND1A.DWG in AutoCAD. All drawings are full scale with dimensional information that can be derived directly from the drawings. All cylinders are drawn as standard double acting with zero stroke that may be altered using the stretch commands. Using the Flairline Cylinders and Valves catalog will be necessary for determining overall length for cylinders that are single acting or have bumpers, stop tubes, various piston styles and special T,L,C & A dimensions. Cylinder length remains the same for cushioned or non-cushioned, therefore all cylinders with external cushion adjustment screws are drawn "cushioned" and may be removed when non-cushioned is required without affecting overall length. Small bore cylinders have no external cushion adjustments. The AutoCAD drawing numbers that are assigned to accessories will have the same drawing number as their catalog part number. Text was added for clarity between various nut sizes, switches and items that are not easily discernible from pictorial representation. AutoCAD drawing numbers are assigned to cylinders first by series, then by bore. Drawing numbers are assigned to check valves and flow controls first by model, then by NPT size and finally by options. For M, D, and H series cylinders use F series cylinder and add (stretch) one inch to base length. For all DI, DIDIE, DSI, DSIDE and like M series use standard I or SI cylinder and add (stretch) one inch to base length.

SIZE CODES EXAMPLES 1/8 = -125 CV 1/8 = CV-125 1/4 = -25 RFC 1/4-P = RFC-25P 3/8 = -375 RFC 3/8 PK = RFC375PK** 1/2 = -5 FSM 1/2 X 4 = FSM-5 3/4 = -75 MTMR-R 3/4 X 6 = FTM-75 1-1/8 = 1-125 F 1-1/8 X 1-1/2 = F1-125 1-1/2 = 1-5 SI 1-1/2 X 3 HC = SI1-5 2 = 2 F 2 X 5 = F2 2-1/2 = 2-5 FIDE 2-1/2 X 10 = FIDE2-5 3 = 3 I 3 X 10 NT = I3 3-1/4 = 3-25 MCC 3-1/4 X 10 HC = FCC3-25 4 = 4 F 4 X 10 C NT = F4

NFPA mounts are filed according to bore size and type of mount. Install using the dimensions from our Cylinders and Valves product catalog. Example: 3-1/4 MP4 = 3-25MP4, 2 MF1 or 2 MF2 = 2MF, 1-1/2 MS2 = 1-5MS2

-All specifications and dimensions are subject to change without notice. -Flairline will not assume responsibility for the application of its products. -Please contact your local distributor or Flairline to verify that you are using the current version of our product catalog.

*AutoCAD is a registered trademark of Autodesk, Inc. **Since drawing files can only contain eight characters, the hyphen was eliminated.

Round1.doc

Recommended publications