Europass Curriculum Vitae s14

RESUME

Personal dossier Name M.SATHEESHKUMAR Address Door No: 18-4-69/1, West Street, Jakkampatty, Aundipatty (Po), Theni (Dt), Tamilnadu– 625512. Mobile 00-91-9791328001 E-mail [email protected] Date of Birth 21.05.1988 Gender Masculine Marital Status Single

Work experience 5.3 years as on 03 July 2017 Date 03 January 2014 – till date s Assistant Professor Position K.L.N. College of Engineering, Pottapalayam, Sivaganga Dist., Tamilnadu. held Name and address of College

Date 25 June 2012 – 29 November 2013 s Assistant Professor Position Nadar Saraswathi College of Engineering and Technology, Theni., Tamilnadu. held Name and address of College

Date 15 December 2011 – 25 May 2012 s Assistant Professor Position Kalasalingam University, Krishnan Kovil, Srivilliputhur, Tamilnadu. held Name and address of College

Last drawn salary Rs. 22550 p.m.

Educational credentials (Ph.D.) (Ph.D.) work titled on Numerical investigation of fluid flow and heat transfer in micro/mini channel; Anna University, Chennai, Tamilnadu, India; July 2013 – till date. PG degree M.E. in CAD/CAM; 2011 Mepco Schlenk Engineering College, Sivakasi, Tamilnadu; 7.89 CGPA; First class UG degree B.E. in Mechanical Engineering; 2009 Pallavan College of Engineering, Kanchipuram, Tamilnadu; 75%; First class with Distinction Diploma Diploma in Mechanical Engineering; 2006 Tamilnadu Polytechnic College, Madurai, Tamilnadu; 84.6%; First class with Distinction School Class X; 2003 Hindu High School, Aundipatty, Tamilnadu; 91.2% Publications Paper: Conference publications International : 4 Paper Details  Effect of geometrical parameters on flow mal-distribution in a wavy microchannel, ICMME2015, SCSVMV University, Kanchipuram, Tamilnadu. 2 & 3 April 2015.  Experimental investigation of heat transfer on coated microchannel, ICMME2015, SCSVMV University, Kanchipuram, Tamilnadu. 2 & 3 April 2015.  Numerical Investigation of Mass Flow Distribution in Wavy Microchannel Heat Sink, ISERMAT2015, SSN College of Engineering, Chennai, Tamilnadu. 8 & 9 January 2015.  CFD analysis and testing of heat exchangers employing twisted tape, ICMEET2K11, Magna college of Engineering, Chennai, Tamilnadu. 11 & 12 April 2011.

Paper: Journal Publications International: Published 3; Accepted 0; Under review 1 Paper Details  Numerical Investigation of Mass Flow Distribution in Wavy Microchannel Heat Sink, Applied Mechanics and Materials, ISBN No. 16609336, Scitech Publications Ltd., (Published)  Effect of geometrical parameters on flow mal-distribution in a wavy microchannel, Applied Mechanics and Materials, ISBN No. 16609336, Scitech Publications Ltd., (Published)  Experimental investigation of heat transfer on coated microchannel, Applied Mechanics and Materials, ISBN No. 16609336, Scitech Publications Ltd., (Published)  Flow Maldistribution and Heat Transfer characteristics of Nanofluids in Microchannel Heat sink, Applied Mechanics and Materials, ISBN No. 16609336, Scitech Publications Ltd., (Under Review) Conferences Conference organized 1 Conference theme National level conference on “Confluence on Design and Safety Engineers” Conference Venue Mepco Schlenk Engineering College, Sivakasi, Tamilnadu. 30 March 2011. Training & Workshops Workshop attended 5 Workshop themes  Two week AICTE sponsored Workshop on Recent advances in Supply chain Network Management held on 06-04-2015 to 18-04-2015 at Rajalakshmi Engineering College, Chennai, Tamilnadu.  One day workshop on Essential Traits of Teaching Methodologies held on 17.07.2014 at K.L.N. College of Engineering, Pottapalayam, Tamilnadu.  One day workshop on KLU Saksham held on 17 March 2012 at Kalasalingam University, Srivilliputhur, Tamilnadu.  Five days workshop on Digital Prototyping using AutoDesk Inventor conducted by ICTACT Chennai held on 23-11-2015 to 27-11-2015 at St. Xavier’s Catholic College of Engineering, Nagercoil, Tamilnadu.  One day workshop on Intellectual Property Rights and Innovation conducted by Quality Circle – Advanced Research and Development (QC-ARD) of K.LN. College of Enginneering in association with Anna University, Chennai on 04-03-2016 held at K.L.N. College of Engineering, Pottapalayam, Tamilnadu. Training attended 3 Training themes  Two days awareness program on Outcome based NBA accreditation held on 05- 05-2014 & 06-05-2014 at K.L.N. College of Engineering, Pottapalayam, Tamilnadu.  Five days intensive training program in CFD (Computational Fluid Dynamics) held on 16-06-2014 to 20-06-2014 at VIT University, Chennai, Tamilnadu.  Three days short term training program on “Fundamentals and Applications of FEA & CFD in Engineering” held on 01-06-2015 to 03-06-2015 at Mepco Schenk Workshop organized Engineering College, Sivakasi, Tamilnadu. 1 Workshop theme Oneday National Level Workshop on Basic Insight of Fundamentals of CFD Workshop venue Nadar Saraswathi College of Engineering & Technology, Theni, Tamilnadu on 1st October 2013.

Faculty development Program FDP attended 2 Title & Venue  Technical advancement in CAD/CAM/CAE & Automation Technologies conducted by Velammal College of Engineering & Technology, Madurai, Tamilnadu & M/S Trident Techlabs Pvt. Ltd., on 15 February 2013.  Five days FDP on Autodesk AutoCAD 2015 conducted by ICTACT Chennai held on 13-06-2016 to 17-06-2016 at K.L.N. College of Engineering, Pottapalayam, Tamilnadu.

Resource Person  Delivered a guest lecture on Fundamentals of Meshing during the Two week AICTE sponsored workshop on Advanced computational fluid dynamics on green technology on 02/12/2013 to 15/12/2013 at Sethu Institute of Technology, Madurai, Tamilnadu.  Delivered a guest lecture on Introduction to during the two day workshop on Introduction to CFD with hands on training on 07/08/2013 & 08/08/2013 at K.L.N. College of Engineering, Pottapalayam, Tamilnadu. Achievements  Got best paper award for the paper Numerical Investigation of Mass Flow Distribution in Wavy Microchannel Heat Sink, ISERMAT2015, SSN College of Engineering, Chennai, Tamilnadu. 8 & 9 January 2015.  Got fund Rs.12000 from ISHRAE (Indian Society of Heating Refrigerating and Air-conditioning Engineers) for the project CFD analysis and testing of heat exchangers employing twisted tape during the year 2010-11.

Membership in  Institution of Engineers Professional Bodies

Details of subjects handled UG Level Heat and Mass Transfer Gas dynamics & Jet Propulsion Thermal Engineering Engineering Graphics

Technical skills and Meshing: Hypermesh- BIW, Plastic, Mid-Surface Extraction, 3D Components. Competences Gambit-2D & 3D Parts ICEM CFD: 2D & 3D Parts (Tria mesh only) CFD Softwares Fluent, Star CCM+ (Projects were done in Heat Transfer area) Part Modelling, Assembly & Sheet Metal: Creo, Solid Works, Autodesk Inventor, AutoCAD Drafting: AutoCAD (2D Drafting, 3D Modelling, Isometric modelling, Visual Lisp Hypermesh Program) Hypermesh Certification Form Techzilon Technology Solution, Bangalore (Altair Certified). The Various components worked with Quad, Tria, Hexa, Tedra elements for shell and solid parts, Academics projects were carried out during the training period. StarCCM+ For the shell components the mid surface was extracted and meshed. The mesh was carried out using with surface and without surface of the component. StarCCM+ & Fluent StarCCM+ Certification Form Techzilon Technology Solution, Bangalore (CD- Adapco Certified). Academic Projects Simulated CFD analysis for a diverse set of applications like automotive, Electronic Title cooling, building HVAC, Heat Exchanger, Multi Phase Analysis Time Step Analysis. Software Packages Used Abstract CFD analysis and testing of heat exchangers employing twisted tape AutoCAD, CREO, Hypermesh, Fluent Heat transfer rate of the double pipe heat exchanger increased by passive heat transfer enhancement technique. Double pipe heat exchanger was used. The problem is carried out with and without twisted tape both in experiment and fluent simulation. Hot water flowed at the outer pipe and cold water flowed at the Present Work inner pipe of double pipe heat exchanger. The twisted tape was inserted in the cold water pipe. This replaced the maximum velocity of the pipe from middle to wall side and increases the turbulence of the fluid. The heat transfer rate of the Title heat exchanger with twisted tape increased 16% compared with the heat Software Packages Used exchanger without twisted tape. Abstract The cold water is replaced by nanofluid (Al2O3, SiO2) and the experiment and fluent simulation is going to carry out. Numerical investigation of fluid flow and heat transfer in micro/mini channel CREO, Hypermesh, Fluent In order to cope with ever increasing demands from the electronic, automotive and aerospace industries, cooling devices have to be small in size, light-weight and of high performance. The search for a more efficient cooling technology becomes one of the bottle neck problems of the further development of the electronic and automotive industry. Microchannel liquid cooling is one of the candidates for this purpose. The most important parameter in the microchannel is the distribution of the coolant inside the channel. A uniform flow in the Future Work microchannel leads to uniform heat transfer. An experimental and numerical simulation is carrying out to minimize the flow maldistribution inside the microchannel and heat transfer rate by using water and nano-fluid as working fluid, uniform heating and non-uniform heating of microchannel. Header is the major part in the microchannel which supplies fluid in to different channels. In this, five different shape of the header was considered namely circular, frustum conical, rectangular, triangular and trapezoidal. The heat transfer rate is increased because of more volume to surface area ratio. The simulation will be carried out by the straight microchannel with ribs, other shapes of the microchannel like wavy microchannels with/without ribs.

Computer skills and Windows Office package (Ms Word, Excel, PowerPoint) competences

Notice period One month from selection of interview

I declare that the above particulars furnished by me are true to the best of my knowledge

Place: Date: Sig nature