Dough Sheeter Safe Work Procedure

Page 1 of 3 WSHMS-02C-SWP-027

Division: RETSD Analysis By: Kildonan- Date: Jun/24/2013 East Staff

Department: Kildonan-East Collegiate Supervisor: Frequency: Hourly

Job Title: Culinary & Pastry Arts Approved By: JSA Number: CPA16

Job Title: Doyon Dough Sheeter CPA16 Job Performed By: Teacher and or Stude nts

REQUIRED PERSONAL PROTECTIVE EQUIPMENT: Chef Jackets, aprons, hair net and chef hat.

GENERAL NOTES: No nail polish, gel nails, jewelry (including watches), cell phones, or music devices allowed in the kitchen. Hair must not be visible outside of the hair net or chef's hat.

JOB SAFETY ANALYSIS:

Step Description Hazard Controls 1 The dough sheeter must be Tipping Machinery Make sure machine is placed on a stable and solid level surface. placed on a solid horizontally Crushing Injury leveled surface. Inspect cord for wear or Electric Shock Lock out if damaged and report to instructor. DO NOT USE IF CORD damage. Inspect that guards are Crush/Pinch Points/Amputation OR GUARD IS DAMAGED. in place and in working order. It is forbidden to remove, modify or damage the security bars Lock out if damaged and report (guards) of the machine. to instructor. Do Not Use if guards or cords are damaged. Set the table canvas. Make sure the drive lever switch is in the center (neutral) position.

Page 1 of 3 Print Date: Jun/25/2013 Put the general switch in position I and press the green start button labeled “I”. Pull the manual driving lever down or up to activate the canvas. The center position is neutral. The long blue lever on the side controls the opening between the two cylinders, so you can obtain different dough thickness. Select the desired speed using the arrow buttons as per teacher instructions. To stop the machine, you have to put the driving switch in central position and then, press the red stop button labeled “0”. Alternatively, you can press the emergency “STOP” button, or lift the safety guards which will stop the entire machine immediately. To restart after an emergency stop, twist out the emergency button, then press the green star button labeled “I”. When your work is complete Do not leave the machine running unattended. turn off the general switch.

Cleaning: Dough Sheeter Safe Work Procedure

Page 3 of 3 WSHMS-02C-SWP-027

2 Always unplug the machine before cleaning. To clean the cylinders, do not use knives, sandpaper, metallic objects, hard brushes or any tools that may damage its surface. You may use plastic tools or soft sponges. To clean the canvas, use a soft brush. Do not use toxic products, solvents, abrasive agents or any product that may damage the surfaces or the dough’s composition. Before switching the machine on, make sure that nothing has been forgotten on the machine.

AUTHORIZED EMPLOYEE INFORMATION:

ID NUMBER: LAST NAME: FIRST NAME: REMARKS: JOB HISTORY INFORMATION:

DATE: REMARKS:

Approval Signature: Date:

Page 3 of 3 Print Date: Jun/25/2013