DOCSLIB.ORG

Reactivo Catalogue Copy

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Reactivo Catalogue Copy Reactivo® PRODUCT CATALOGUES 2020 - 2021 Traceable Chemicals | Reagents | Standards | Buffers For laboratories and productions Designed for Quality Team Reactivo® is proud to introduce our latest range of reagents manufactured in Singapore. Reactivo®’s slogan is “Designed for Quality” , which emphasize on the best quality, and unique capability of providing personalised service. Our products have passed stringent quality testing throughout the production process, which further prevents contamination before sealing and bottling. Packaging info packaging is very essential to the product that we deliver. Available icon 100 ml 500 ml 1000 ml 2000 ml 5000 ml 10000 ml 25000 ml IBC 100000 ml P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Jerry can P HDPE Carboy P HDPE Carboy IBC Tank 500 ml 1000 ml 4000 ml G Glass Bottle G Glass Bottle G Glass Bottle Catalogue directory Guide and legend on how to read the catalogue, and it’s content A Sodium Persulfate (Sodium peroxodisulphate) Legends It is mainly used as a radical initiator for emulsion polymerization reactions for A Title B styrene based polymers such as Acrylonitrile butadiene styrene. G B Application CAS No. Molar Mass 7775-27-1 238.10 g/mol G C Chemical structure C Chemical Formula IUPAC Name D Order info Na S O Sodium peroxydisulfate 2 2 8 E Concentration F Packaging options Product No. Concentration Packaging G GHS Pictograms RSIT001 0.05 N 100 ml 500 ml 1000 ml 1000 ml 4000 ml D Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle G Glass Bottle G Glass Bottle E F Label directory Guide and legend on how to read the product label, and it’s content Legends 1 Item No. 8 10 2 Item Name Caustic Soda 1 Assay 0.1N CAS No.: 310-73-2 RTO.P8234.034 Insoluble matter 0.005% Molecular weight: 39.997 g/mol 2 Residue after ignition 0.001% 3 Concentration/ Grade DANGER 9 Sodium Hydroxide Chloride (as Cl) 0.001% Oxalate (as C2O4) 0.001% H314 - Causes severe skin burns and eye damage Phosphate (as PO4) 0.001% H318 - Causes serious eye damage Solution Sulfate (as SO4) 0.001% 4 Volume / Weight H370 - Causes damage to respiratory system Iron (as Fe) 1 ppm H402 - Harmful to aquatic life 3 0.1N, AR Grade Lead (as Pb) 1 ppm Keep the cap closed while not in use Substances Carbonizable by Pass test 5 Lot / Batch Number Hot Sulfuric Acid (Tartrates, etc.) 4 1000ml e 33.814 fl oz 6 Expiry Date OPEN DATE LOT NO EXP DATE 5 27052101000LPW06 6 26/05/2022 Produced by: 27/05/21 (DD/MM/YYYY) 7 Open Date Field Product Lot no. no. 7 NaOH 8 Identifying information ® MADE IN [email protected] | +65 6777 7077 | www.hcs-lab.com/reactivo Reactivo HCS Scientific & Chemical Pte Ltd a brand by HCS Scientific SINGAPORE HCS Scientific & Chemical Pte Ltd 9 GHS information 10 Specification Contents 01 Standardized Titrant EDTA Solution Page 01 Sodium Thiosulfate Page 01 Barium Chloride Page 02 Potassium Permanganate Page 02 Starch Indicator Page 02 Iodine Solution Page 02 02 Inorganic Acid Hydrochloric Acid Page 03 Sulphuric Acid Page 03 Phosphoric Acid Page 04 Nitric Acid Page 05 03 Inorganic Bases Sodium Hydroxide Page 06 Potassium Hydroxide Page 07 Ammonia solution Page 07 04 Inorganic Salt Solution Sodium Persulfate Page 08 Sodium Hyprochlorite Page 08 05 Page 09 Conductivity Standard Page 09 Electrode Filling Solution Page 10 Page 10 06 Organic Acid Acetic Acid Page 11 0.2% p-Anisidine in glacial acetic acid Page 11 Nital Solution, 4% Nitric Acid with 96% Ethanol Page 11 07 Organic Base Potassium Hydroxide Page 12 0 1 Standardized Titrant S t an Introduction The process of determining the exact concentration (molarity) of a solution. d a An exact volume of one substance is reacted with a known amount of another substance. r di z ed EDTA Solution (Ethylenediaminetetraacetic acid) Widely used to bind to iron and calcium ions. It binds these ions as a T hexadentate chelating agent. i t r ant CAS No. Molar Mass 60-00-4 292.244 g/mol Chemical Formula IUPAC Name C10H16N2O8 2,2’,2”,2”-(Ethane-1,2-diyldinitrilo)tetraacetic acid Product No. Concentration Packaging 0.05M ROS001 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy 0.1M ROS002 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy Sodium Hyposulfate (Hyposulphite of soda) Used in gold mining, water treatment, analytical chemistry, the development CAS No. Molar Mass 7772-98-7 158.11 g/mol Chemical Formula IUPAC Name Na2S2O3 Sodium thiosulfate Product No. Concentration Packaging 0.01N RIS005 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy P age 0 1 0 1 Barium Chloride (Muryate of Barytes) plants and also in the manufacture of heat treatment salts S t an CAS No. Molar Mass d 10361-37-2 208.23 g/mol a r di Chemical Formula IUPAC Name z BaCl2 Barium muriate ed T Product No. Concentration Packaging i t r ant 1 Mol/L RIS006 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy 5% RIS007 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy 10% RIS008 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy Potassium Permanganate (Baeyer's reagent) Used in qualitative organic analysis to test for the presence of unsaturation. Quantitatively determine the total oxidizable organic material in an aqueous sample. CAS No. Molar Mass 7722-64-7 158.034 g/mol Chemical Formula IUPAC Name KMnO4 Potassium manganate(VII) Product No. Concentration Packaging 0.02 Mol/L RIB008 500 ml 1000 ml 4000 ml Standardized G Glass Bottle G Glass Bottle G Glass Bottle Starch Indicator Solution Used mostly on indicator procedure of Iodimetric Titrations in lab, to observe the presense of iodine. CAS No. Density 9005-25-8, 69-72-7 1g/mL Product No. Concentration Packaging 1% ROI001 500 ml 1000 ml 4000 ml Standardized G Glass Bottle G Glass Bottle G Glass Bottle P age 02 2% ROI001 500 ml 1000 ml 4000 ml Standardized G Glass Bottle G Glass Bottle G Glass Bottle 0 2 Inorganic Acid Ino Introduction r g An acid derived from one or more inorganic compounds. All inorganic acids form hydrogen anic ions and the conjugate base ions when dissolved in water. A Hydrochloric Acid (Spirits of salt, Muriatic acid) cid Major applications include manufacture of a number of high purity metal chlorides, ammonium chloride CAS No. Molar Mass 7647-01-0 36.458 g/mol Chemical Formula IUPAC Name HCl Chlorane Product No. Concentration Packaging 0.01 N RIA001 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy 0.1 N RIA002 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy 0.5 N RIA003 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy 1 N RIA004 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy 2 N RIA005 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy Sulphuric Acid (Oil of vitriol) Used for manufacture of phosphate and nitrogen fertilizer. Important for industrial cleaning agent, catalyst, electrolyte, and domestic uses. CAS No. Molar Mass 7664-93-9 98.079 g/mol Chemical Formula IUPAC Name H2SO4 Sulfuric acid Product No. Concentration Packaging 0.01 N RIA006 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy P age 0 3 0 2 Product No. Concentration Packaging Ino RIA007 0.01 N 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy r g anic 0.05 N RIA008 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy A cid 1 N 100 ml 500 ml 1000 ml 10000 ml 25000 ml RIA009 P P Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle HDPE Carboy HDPE Carboy 2 N 10000 ml 25000 ml RIA010 100 ml 500 ml 1000 ml P P Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle HDPE Carboy HDPE Carboy RIA011 5 N 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy RIA012 5 % 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy RIA013 10% wt 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy RIA014 1.8 N 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy 1.8 N w/ 80mg/L RIA015 100 ml 500 ml 1000 ml 10000 ml 25000 ml Maganese Sulfate P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy Hydrate RIA016 2 N 100 ml 500 ml 1000 ml 10000 ml 25000 ml Standardized P HDPE Bottle P HDPE Bottle P HDPE Bottle P HDPE Carboy P HDPE Carboy Phosphoric Acid (Orthophosphoric acid) The dominant use of phosphoric acid is for fertilizers, anti-rust treatment and pH adjuster or sanitizing agent in the dairy, food, and brewing industries.
Load more

Recommended publications
  • Cover Page for Safety Data Sheet
    Simplicity in Water Analysis Cover Page for Safety Data Sheet Thank you for choosing CHEMetrics, Inc. We appreciate your business. In order to best serve your needs for accurate and complete Safety Data, we offer the following information as supplemental to the attached SDS. SDS No.: S4201 Version No.: 2.2 Product Name: Activator Solution for Formaldehyde CHEMets®, VACUettes®, & Vacu-vials® Kits, and for Glycol CHEMets® & Vacu-vial® Kits Part Nos.: A-4201, A-4401 Product Descriptions: Activator Solution: Plastic bottle, contains approximately 3.4 g of solid reagent. Test kits contain one (1) bottle of reagent. Activator Solution packs contain six (6) bottles of reagent. Addendum to Section 14 Transport Information: Shipping container markings and labels for this product, as received, may vary from the contents of section 14 of the SDS for one or both of the following reasons: • CHEMetrics has packaged this product as Dangerous Goods in Excepted Quantities according to IATA, US DOT, and IMDG regulations. • CHEMetrics has packaged this product as part of a test kit or reagent set composed of various chemical reagents and elected to ship as UN 3316 Chemical Kit, Hazard Class 9, Packing Group II or III. In case of reshipment, it is the responsibility of the shipper to determine appropriate labels and markings in accordance with applicable transportation regulations. Additional Information: • “Print Date” = Revision Date (expressed as DD/MM/YYYY) • Test kits and reagents sets may contain additional chemical reagents. See separate SDS(s). CHEMets®, VACUettes®, Vacu-vials®, and Titrets® are registered trademarks of CHEMetrics Inc. 4295 Catlett Road, Midland, VA 22728 P: 800.356.3072 F: 540.788.4856 www.chemetrics.com Activator Solution for Formaldehyde CHEMets, VACUettes, & Vacu-vials Kits, and for Glycol CHEMets & Vacu-vials Kits CHEMetrics, Inc.
    [Show full text]
  • Safety Data Sheet: Sodium Persulfate
    Safety data sheet according to Regulation (EC) No. 1907/2006 (REACH), amended by 2015/830/EU Sodium persulfate ≥ 99% article number: 4365 date of compilation: 2016-07-05 Version: 2.0 en Revision: 2019-11-27 Replaces version of: 2016-07-05 Version: (1) SECTION 1: Identification of the substance/mixture and of the company/ undertaking 1.1 Product identifier Identification of the substance Sodium persulfate Article number 4365 Registration number (REACH) 01-2119495975-15-xxxx EC number 231-892-1 CAS number 7775-27-1 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses: laboratory chemical laboratory and analytical use 1.3 Details of the supplier of the safety data sheet Carl Roth GmbH + Co KG Schoemperlenstr. 3-5 D-76185 Karlsruhe Germany Telephone: +49 (0) 721 - 56 06 0 Telefax: +49 (0) 721 - 56 06 149 e-mail: [email protected] Website: www.carlroth.de Competent person responsible for the safety data : Department Health, Safety and Environment sheet e-mail (competent person) : [email protected] 1.4 Emergency telephone number Name Street Postal code/city Telephone Website National Poisons In- Dudley Rd B187QH Birmingham 844 892 0111 formation Service City Hospital Emergency information service +49/(0)89 19240 SECTION 2: Hazards identification 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 (CLP) Classification acc. to GHS Section Hazard class Hazard class and cat- Hazard egory state- ment 2.14 oxidising solid (Ox. Sol. 3) H272 3.1O acute toxicity (oral) (Acute Tox. 4) H302 United Kingdom (en) Page 1 / 16 Safety data sheet according to Regulation (EC) No.
    [Show full text]
  • Revision Date: March 2021 1 SODIUM PERSULFATE This Dossier On
    SODIUM PERSULFATE This dossier on sodium persulfate presents the most critical studies pertinent to the risk assessment of sodium persulfate in its use in hydraulic fracturing fluids. This dossier does not represent an exhaustive or critical review of all available data. Where possible, study quality was evaluated using the Klimisch scoring system (Klimisch et al., 1997). Screening Assessment Conclusion – Sodium persulfate is classified as a tier 1 chemical and requires a hazard assessment only. 1 BACKGROUND Sodium persulfate dissociates in aqueous media to the sodium cation (Na+) and persulfate anion 2- (S2O8 ). The persulfate anion will readily hydrolyse (decompose) into sulfate ions. Biodegradation is not applicable to inorganic compounds. Sodium persulfate is not expected to bioaccumulate; it will dissociate (and decompose) to ions that are ubiquitous in the environment. Sodium persulfate is not expected to absorb to soil or sediment because of its dissociation properties, instability (hydrolysis) and high water solubility. Sodium persulfate exhibits moderate acute toxicity by the oral route and low acute toxicity by the inhalation and dermal routes. In humans, sodium persulfate has the potential for skin irritation; it is also a skin sensitiser to guinea pigs and humans. Human exposure to persulfates (including sodium persulfate) have been linked to a variety of skin and respiratory complaints indicative of sensitisation. The complaints consist of immediate and delayed contact hypersensitivity, contact urticarial, rhinitis, bronchitis and asthma. Repeated oral exposure to sodium persulfate resulted in irritation to the gastrointestinal tract; and respiratory irritation was seen in rats repeatedly exposed by inhalation to ammonium persulfate. Sodium persulfate is not genotoxic.
    [Show full text]
  • Application Note 06
    Application Note 06 Synthesis StarterKit Production of Persulfate Description This Application Note describes the oxidative transfor- mation of sodium sulfate to sodium persulfate by using a BDD electrode. The setup is depicted in Figure 1. The following chemical equation is summing up all reactants and products: 2 Na2SO4 + 2 H2O → Na2S2O8 + 2 NaOH + H2 The oxidation number of the sulfate atoms is staying constant while the oxidation number of two oxygen at- oms if changing from -II to –I in the peroxo group. Experiment Figure 1: For the experiment, 1000 ml of a 1 mol/l sodium sulfate Setup to produce persulfate solution is prepared in beaker glass suitable to be used with the Synthesis StarterKit. The volume flow is set to 2 l/min. The electrosynthesis is carried out at 1.3 A which corresponds to a current density of j = 0.4 A/cm². Table 1 shows the experimental data collected during the experiment. Table 1: Experimental data obtained during the experiment Charge Time Current Voltage Temp. V(Thio) c(Ox) [Ah/L] [min.] [A] [V] [°C] [ml] [mmol/l] 0 0 1.3 5.6 20.5 --- --- 0.22 10 1.3 5.7 23.0 0.90 2.15 0.44 20 1.3 5.7 26.0 1.55 3.60 0.66 30 1.3 5.7 28.0 2.30 5.16 0.89 40 1.3 5.7 30.0 2.80 6.14 1.13 50 1.3 5.6 32.0 3.40 7.26 1.37 60 1.3 5.6 33.5 4.00 8.33 The concentration of oxidizer was determined by iodometry ( see appendix and App Note 07) www.condias.de Application Note 06 Synthesis StarterKit Production of Persulfate Figure 2: Graphical representation of the evolution of persulfate concentration In Figure 2 the graphical representation if given for the evolution of the persulfate concentration as a function of charge.
    [Show full text]
  • SAFETY DATA SHEET Sodium Persulfate
    SAFETY DATA SHEET Sodium Persulfate SDS # : 7775-27-1 Revision date: 2021-02-17 Format: NA Version 1.06 1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier Product Name Sodium Persulfate CAS-No 7775-27-1 Synonyms Sodium Peroxydisulfate; Disodium Peroxydisulfate; Peroxydisulfuric acid, disodium salt; Peroxydisulfuric acid, sodium salt. Recommended use of the chemical and restrictions on use Recommended Use: Polymerization initiator; Etchant and cleaner for printed circuit boards; Hair bleaching formulations; Secondary oil recovery; Oxidizing agent for a variety of organic reactions. Restrictions on Use No uses to be advised against were identified. Manufacturer/Supplier PeroxyChem LLC 2005 Market Street Suite 3200 Philadelphia, PA 19103 Phone: +1 267/ 422-2400 (General Information) E-Mail: [email protected] Emergency telephone numbers For leak, fire, spill or accident emergencies, call: 1 800 / 424 9300 (CHEMTREC - U.S.A.) 1 703 / 527 3887 (CHEMTREC - Collect - All Other Countries) +1 303/ 389-1409 (Medical - U.S. - Call Collect) Page 1 / 10 Sodium Persulfate SDS # : 7775-27-1 Revision date: 2021-02-17 Version 1.06 2. HAZARDS IDENTIFICATION Classification OSHA Regulatory Status This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200) Acute toxicity - Oral Category 4 Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2B Respiratory sensitization Category 1 Skin sensitization Category 1 Specific target organ toxicity (single exposure) Category 3 Oxidizing Solids
    [Show full text]
  • B COMMISSION DELEGATED REGULATION (EU) No
    02014R1062 — EN — 21.02.2019 — 002.001 — 1 This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document ►B COMMISSION DELEGATED REGULATION (EU) No 1062/2014 of 4 August 2014 on the work programme for the systematic examination of all existing active substances contained in biocidal products referred to in Regulation (EU) No 528/2012 of the European Parliament and of the Council (Text with EEA relevance) (OJ L 294, 10.10.2014, p. 1) Amended by: Official Journal No page date ►M1 Commission Delegated Regulation (EU) 2017/698 of 3 February 2017 L 103 1 19.4.2017 ►M2 Commission Delegated Regulation (EU) 2019/157 of 6 November 2018 L 31 1 1.2.2019 Corrected by: ►C1 Corrigendum, OJ L 198, 28.7.2015, p. 28 (1062/2014) 02014R1062 — EN — 21.02.2019 — 002.001 — 2 ▼B COMMISSION DELEGATED REGULATION (EU) No 1062/2014 of 4 August 2014 on the work programme for the systematic examination of all existing active substances contained in biocidal products referred to in Regulation (EU) No 528/2012 of the European Parliament and of the Council (Text with EEA relevance) CHAPTER 1 SUBJECT MATTER AND DEFINITIONS Article 1 Subject matter This Regulation lays down rules for the carrying out of the work programme for the systematic examination of all existing active substances referred to in Article 89 of Regulation (EU) No 528/2012.
    [Show full text]
  • Chemical Compatibility Storage Group
    CHEMICAL SEGREGATION Chemicals are to be segregated into 11 different categories depending on the compatibility of that chemical with other chemicals The Storage Groups are as follows: Group A – Compatible Organic Acids Group B – Compatible Pyrophoric & Water Reactive Materials Group C – Compatible Inorganic Bases Group D – Compatible Organic Acids Group E – Compatible Oxidizers including Peroxides Group F– Compatible Inorganic Acids not including Oxidizers or Combustible Group G – Not Intrinsically Reactive or Flammable or Combustible Group J* – Poison Compressed Gases Group K* – Compatible Explosive or other highly Unstable Material Group L – Non-Reactive Flammable and Combustible, including solvents Group X* – Incompatible with ALL other storage groups The following is a list of chemicals and their compatibility storage codes. This is not a complete list of chemicals, but is provided to give examples of each storage group: Storage Group A 94‐75‐7 2,4‐D (2,4‐Dichlorophenoxyacetic acid) 94‐82‐6 2,4‐DB 609-99-4 3,5-Dinitrosalicylic acid 64‐19‐7 Acetic acid (Flammable liquid @ 102°F avoid alcohols, Amines, ox agents see SDS) 631-61-8 Acetic acid, Ammonium salt (Ammonium acetate) 108-24-7 Acetic anhydride (Flammable liquid @102°F avoid alcohols see SDS) 79‐10‐7 Acrylic acid Peroxide Former 65‐85‐0 Benzoic acid 98‐07‐7 Benzotrichloride 98‐88‐4 Benzoyl chloride 107-92-6 Butyric Acid 115‐28‐6 Chlorendic acid 79‐11‐8 Chloroacetic acid 627‐11‐2 Chloroethyl chloroformate 77‐92‐9 Citric acid 5949-29-1 Citric acid monohydrate 57-00-1 Creatine 20624-25-3
    [Show full text]
  • Treated Articles: Allowed Active Substances
    Treated articles: allowed active substances Status of active substance (AS) – product type (PT) combinations as on 18 August 2021 DISCLAIMER: The following table is provided for information purposes only. It is neither mandated by law, nor does it produce any legally binding effects. ECHA does not give any guarantees or warranties pertaining to the accuracy or the correctness of the information provided in the table. ECHA also does not accept any responsibility or liability for any use and/or reliance made of the information contained in the table. Any use or reliance of the information in the table falls solely on the user. Should you identify any issues with the table, please submit your observations through the ECHA contact forms. EXPLANATORY NOTE ECHA has voluntarily compiled this list to assist parties in identifying AS-PT combinations that can be used in treated articles. This is either because they fulfil the requirement under Article 58(2) of Regulation (EU) No 528/2012, or they benefit from the derogation under Article 94 of the Regulation. For ease of reference, the AS-PT combinations have been categorised into different parts based on objective criteria, as elaborated on below: Part I contains AS-PT combinations which are under examination either in or outside the Review Programme, or have been approved (i. e. they were included on Union list or Annex I list). Articles treated with a biocidal product (or intentionally incorporating a biocidal product) containing an AS which is listed in Part I are legally on the EU market. Part II contains withdrawn AS-PT combinations for which a submission was made by 1 September 2016 but for which the period of grace has not yet expired.
    [Show full text]
  • Safety Data Sheet
    SAFETY DATA SHEET Preparation Date: 6/29/2015 Revision date 11/26/2019 Revision Number: G2 1. IDENTIFICATION Product identifier Product code: S1394 Product Name: SODIUM PERSULFATE, REAGENT Other means of identification Synonyms: Sodium peroxydisulfate Peroxydisulfuric acid, disodium salt Disodium peroxodisulfate CAS #: 7775-27-1 RTECS # SE0525000 CI#: Not available Recommended use of the chemical and restrictions on use Recommended use: Bleaching agent. Electroplating agent. Swimming pool "shock" treatment. Viscosity adjustors. Starch modification. Petroleum-depolymerizaton in oil recover. Cleaning/washing agents. Disinfectant. Uses advised against No information available Supplier: Spectrum Chemical Mfg. Corp 14422 South San Pedro St. Gardena, CA 90248 (310) 516-8000 Order Online At: https://www.spectrumchemical.com Emergency telephone number Chemtrec 1-800-424-9300 Contact Person: Tom Tyner (USA - West Coast) Contact Person: Ibad Tirmiz (USA - East Coast) 2. HAZARDS IDENTIFICATION Classification This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Considered a dangerous substance or mixture according to the Globally Harmonized System (GHS) Acute toxicity - Oral Category 4 Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Respiratory sensitization Category 1 Skin sensitization Category 1 Specific target organ toxicity (single exposure) Category 3 Oxidizing solids Category 3 Label elements Product code: S1394 Product name: SODIUM Page 1 / 13 PERSULFATE,
    [Show full text]
  • SODIUM PERSULFATE (SODIUM PEROXYDISULFATE) Na₂s₂o8
    SODIUM PERSULFATE (SODIUM PEROXYDISULFATE) Na₂S₂O8 Specifications Value Test Method Appearance White Crystal Visual Purity (Na₂S₂O8) Min. %99 (w/w) Iodometric Titration Active Oxygen Min. %6.65 (w/w) Iodometric Titration Acid Content Max. %0.10 (w/w) Titration(Reaction with NaOH) Iron (Fe) Content Max. 5 ppm Colorimetric Heavy Metals (Fe excluded, Pb content) Max. 5 ppm Turbidimetric PRODUCT DESCRIPTION Molecular Weigh : 238.1 kg/kmol Specific Gravity : 2,590 kg/m3 pH (%5 solution) : 3-5 Thermal Decomposition : ≥65°C Solubility in Water : 73(25 °C) 86(50 °C) (g/100 g H2O) APPLICATION Initiator for the emulsion or solution Polymerization of acrylic monomers, vinyl acetate, vinyl chloride etc. and for the emulsion co-polymerization of styrene, acrylonitrile, butadiene etc., Oxidizing agent, used in cleaning and pickling of metal surface, accelerated curing of low formaldehyde adhesives and modification of starch, production of binders and coating materials, Desizing agent and bleach activator, It is an essential component of bleaching formulations for hair cosmetics. PACKAGING, STORAGE & SHELF LIFE 25 kgs and 1000 kgs net polyethylene and polypropylene bags. 1000 kgs bag has antistatic properties. It must be stored in well closed original packing and protected from direct sunlight, heat and humidity. Impurities such as dirt, rust or traces of metal and reductants may cause catalytic decomposition. It can be stored for 12 months below 30°C. The product as supplied or in solution needs to be handled with appropriate care.The eye, skin and clothes must be protected when working with SPS as damp powder or aqueous solution has a bleaching and slightly corroding effect.
    [Show full text]
  • Method for Producing Sodium Persulfate
    Patentamt J JEuropâischesEuropean Patent Office (§) Publication number: 0 081 063 Office européen des brevets B 1 © EUROPEAN PATENT SPECIFICATION ® Dateof publication of patent spécification: 10.07.85 @ ht. Cl.4: C 01 B 15/08 ® Application number: 82109350.7 (22) Date offiling: 08.10.82 @) Method for producing sodium persulfate. (§) Priority: 10.11.81 US 320145 (7jj) Proprietor: FMC Corporation 2000 Market Street Philadelphia Pennsylvania 19103 (US) (§) Date of publication of application: 15.06.83 Bulletin 83/24 (7?) Inventor: McCarthy, MichaelJoseph 14 Lannigan Drive (§) Publication of the grant of the patent: Lawrenceville New Jersey 08648 (US) 10.07.85 Bulletin 85/28 Inventor: Schillaci, Phillip Vincent 226 Kaymar Drive Tonawanda New York (US) (§) Designated Contracting States: AT BE CH DE FR GB IT LI LU NL SE @) Representative: Barz, Peter, Dr. et al Patentanwalte Dr. V. Schmied-Kowarzik Dipl.- (68) References cited: Ing. G. Dannenberg Dr. P. Weinhold Dr. D. Gudel FR-A-1 493 723 Dipl.-lng. S. Schubert Dr. P. Barz US-A-2 899 272 Siegfriedstrasse 8 US-A-3 71 6 629 D-8000 Miinchen 40 (DE) US-A-3 954952 The file contains technical information submitted after the application was filed and not included in this specification Note: Within nine months from the publication of the mention of the grant of the European patent, any person may give notice to the European Patent Office of opposition to the European patent granted. Notice of opposition shall be filed in a written reasoned statement. It shall not be deemed to have been filed until the opposition fee has been paid.
    [Show full text]
  • Safety Assessment of Inorganic Sulfates As Used in Cosmetics
    Safety Assessment of Inorganic Sulfates as Used in Cosmetics Status: Draft Report for Panel Review Release Date: February 21, 2014 Panel Date: March 17-18, 2014 The 2014 Cosmetic Ingredient Review Expert Panel members are: Chair, Wilma F. Bergfeld, M.D., F.A.C.P.; Donald V. Belsito, M.D.; Curtis D. Klaassen, Ph.D.; Daniel C. Liebler, Ph.D.; Ronald A Hill, Ph.D. James G. Marks, Jr., M.D.; Ronald C. Shank, Ph.D.; Thomas J. Slaga, Ph.D.; and Paul W. Snyder, D.V.M., Ph.D. The CIR Director is Lillian J. Gill, D.P.A. This report was prepared by Wilbur Johnson, Jr., M.S., Senior Scientific Analyst and Bart Heldreth, Ph.D., Chemist. © Cosmetic Ingredient Review 1620 L STREET, N.W., SUITE 1200 ◊ WASHINGTON, DC 20036-4702 ◊ PH 202.331.0651 ◊ FAX 202.331.0088 ◊ [email protected] Commitment & Credibility since 1976 Memorandum To: CIR Expert Panel Members and Liaisons From: Wilbur Johnson, Jr. Senior Scientific Analyst Date: February 21, 2014 Subject: Draft Report on Inorganic Sulfates A Scientific Literature Review (SLR) on inorganic sulfates was issued on December 2, 2013. Use concentration data received from the Personal Care Products Council (Council) were incorporated prior to announcement of the SLR. Comments from the Council were received during the 60-day comment period. Included in this package for your review is the Draft Report on Inorganic Sulfates, the CIR report history, Literature search strategy, Ingredient Data profile, 2013 FDA VCRP data, use concentration data from the Council (data1 pdf file), final reports on sodium sulfate and ammonium, potassium, and sodium persulfates (final1 and final2 pdf files), and comments provided by the Council (pcpc1 and pcpc2 pdf files).
    [Show full text]