M A N U F A C T U R E R O F E X P A N D E D P O L Y S T Y R E N E
Polypearl Moulded Products Ltd Unit 12-16, Longwood Road, Corringham Road Industrial Estate, Gainsborough, Lincolnshire, DN21 1QB. Tel: 01427 612007 Fax: 01427 810952 Email: [email protected]
DECLARATION OF PERFORMANCE
POLYPEARL PLUS EPS INSULATION BOARD
1. Unique identification code of the product type. Polypearl Plus EPS Insulation Board
Type, batch or serial number or any other element 2. allowing identification of the construction product See CE mark label affixed to the boards or as required pursuant to Article 11(4) of the CPR. packaging
Intended use or uses of the construction product, in accordance with the applicable harmonised 3. technical specification, as foreseen by the EPS Thermal insulation for buildings manufacturer.
Name, registered trade name or registered trade Polypearl Moulded Products Limited 4. mark and contact address of the manufacturer as Unit 16 Longwood Road, Corringham Road Ind Est, required pursuant to Article 11(5). Gainsborough, Lincolnshire DN21 1QB.
Where applicable, name and contact address of the authorised representative whose mandate Not Applicable 5. covers the tasks specified in Article 12(2).
System or systems of assessment and verification 6. of constancy of performance of the construction AVCP 3 product as set out in Annex V.
In case of the declaration of performance 7. concerning a construction product covered by a EN 13172 harmonised standard.
In case of the declaration of performance 8. concerning a construction product for which a Not Applicable European Technical Assessment has been issued.
The performance of the product identified in point 1 is in conformity with the declared performance. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. On behalf of the manufacturer by: A.G. Tebb Andrew Tebb, Operations Director Polypearl Moulded Products Limited – 6th March 2015
Part of the Tebway Group of Companies Registered Office: 50-54 Oswald Road, Scunthorpe, North Lincolnshire, DN15 7PQ. Telephone: 01724 847844
Company Registration No. 7532984 VAT Registration No. GB 106 9039 23 M A N U F A C T U R E R O F E X P A N D E D P O L Y S T Y R E N E
Polypearl Moulded Products Ltd Unit 12-16, Longwood Road, Corringham Road Industrial Estate, Gainsborough, Lincolnshire, DN21 1QB. Tel: 01427 612007 Fax: 01427 810952 Email: [email protected]
POLYPEARL PLUS EPS INSULATION BOARD DECLARED PERFORMANCE
Essential Harmonised Technical Characteristics Performance Standard
Product Dimensions 2400 x 1200 mm Length x Width 1200 x 600 mm BS EN 822
Product Dimension 30 – 300 mm BS EN 823 Thickness
Compressive Strength At 10% CS (10) 60 BS EN 826 Deformation
Bending Strength NPD
BS EN 1609 ־Short Term Water Absorption 0.075 kg·m²
Reaction To Fire Class E BS EN 13501 - 1
Thermal Conductivity 0.038 W/mK BS EN 12667
NPD = No Performance Determined Data applies to 50 mm thick samples only.
On behalf of the manufacturer by: A.G. Tebb Andrew Tebb, Operations Director Polypearl Moulded Products Limited – 6th March 2015
Part of the Tebway Group of Companies Registered Office: 50-54 Oswald Road, Scunthorpe, North Lincolnshire, DN15 7PQ. Telephone: 01724 847844
Company Registration No. 7532984 VAT Registration No. GB 106 9039 23