Xbox 5.1 - SURROUND SOUND SYSTEM

SETUP GUIDE SPHEREX INCORPORATED

IMPORTANT! Before using this product, read the Xbox video game system instructional manual for safety, health and other information

Xbox 5.1 - Surround Sound System

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. 7AI//SX51EF-Nv4 Safety & Service Information

CAUTION: 11. Power-Cord Protection - Route power cords so they will not be walked RISK OF ELECTRIC SHOCK! DO NOT OPEN! on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.. CAUTION 12. Overloading - Do not overload wall outlets, extension cords, or integral RISK OF ELECTRIC SHOCK DO NOT OPEN convenience receptacles as this can result in a risk of fire or electrical shock. CAUTION: To reduce the risk of electric shock and fire, do not remove the cover or back plate of the device enclosure. There are 13. Lighting and Periods of Non-Use - For added protection for this product no user serviceable parts inside. during a lightning storm, or when unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and The international symbol of a lighting bolt inside a triangle powerline surges. is intended to alert the user to uninsulated "dangerous 14. Cleaning - Unplug this product from the wall outlet before cleaning. Do voltage" within the device enclosure. not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. The international symbol of an exclamation point inside a triangle is intended to alert the user to the presence of 15. Object and Liquid Entry - Never insert objects of any kind into this important operating, maintenance and servicing product. They may touch dangerous voltage points or short-out parts information in the manual accompanying the device. that could result in a fire or electric shock. 16. Damage Requiring Service - Unplug this product from the wall outlet WARNING: and refer servicing to qualified service personnel under the following To reduce the risk of fire or electrical shock, do not expose conditions: this equipment to rain or moisture. a. When the power-supply cord or plug is damaged, b. If liquid has been spilled, or objects have fallen into the product, c. If the product has been exposed to rain or water, d. If the product does not operate normally by following the operating Health and Safety instructions. Adjust only those controls that are covered by the 1. IMPORTANT! Before using this product, read the Xbox video game operating instructions as an improper adjustment of other controls system instruction manual for safety, health, and other information. may result in damage and often will require extensive work by a qualified technician to restore the product to its normal operation, 2. Read Instructions - All safety and operating instructions should be read e. If the product has been dropped or damaged in any way, and before operating the device. f. When the product exhibits a distinct change in performance - this indicates a need for service. 3. Retain Instructions - The safety and operating instructions should be retained for future reference. 17. Replacement parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the 4. Heed Warnings - Adhere to all warnings on the device and in the manufacturer or have the same characteristics as the original parts. operating instructions. Unauthorized substitutions may result in fire, electric shock, or other hazards. 5. Follow Instructions - All operating and safety instructions should be followed. 18. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to 6. Attachments - Do not use attachments not recommended by the product determine that the product is in proper operating condition. manufacturer as they may cause hazards.

7. Water and Moisture - Do not expose the apparatus water sources that Servicing - Do not attempt to service this product yourself as opening or could drip or splash on the system. removing covers may expose you to dangerous voltage or other hazards. In North America, refer all servicing to http://www.spherexinc.com. Outside of 8. Heat - Place this product away from heat sources such as radiators, North America, please contact your local dealer or distributor. heat registers, stoves, amplifiers or anything that produces heat.

9. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult with your product dealer or the local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

10. Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug. If the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

2 Xbox 5.1 - Surround Sound System

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. Getting Started

Welcome Congratulations! The Xbox 5.1 Surround Sound System will make watching movies, playing games and listening to music more fun than ever. Please One subwoofer unit One pair of "AA"(R6) batteries use the following instructions to connect and operate your system. If you’re also connecting other equipment such as a TV, VCR, DVD player, CD Player or other source component, use this guide in combination with the manuals that came with those components to aid in set-up. One power cord One IR display box and (export models only) 3 meters of DIN cable

Contents SAFETY & SERVICE INFORMATION...... 2 GETTING STARTED...... 3 UNPACKING...... 3 Five satellite speakers One optical cable REAR PANEL...... 4 DISPLAY BOX...... 5 REMOTE CONTROL...... 6 SPEAKER SETUP...... 7 BALANCING THE SPEAKERS...... 7-8 SIGNAL INPUT CONNECTIONS...... 9-10 Five sets of speaker cables with One coaxial digital audio cable SPHEREX OPTIMIZATION SETTING...... 11 RCA connector on both ends (single wire) with RCA connectors LISTENING MODES...... 11 ADVANCE CONTROL...... 11 SPECIFICATIONS...... 12 LIMITED WARRANTY...... 13 FAQ SECTION...... 14 One Remote Control One stereo miniplug-to-RCA sockets adaptor

Setup Guide

Unpacking Your Xbox ®5.1 Surround Sound System includes:

Inserting Batteries into Remote Control Insert two AA (R6) batteries according to the + and - signs on the battery compartment. To use the remote control, point it directly at the remote receiver box. Whenever a button is pressed, a green indicator will light up on the remote control.

IMPORTANT NOTE: Before You Begin

Do not connect the AC power cords until all connections are completed. Do not use this product immediately after transferring it from a cold place to a warm place, as there is a risk of condensation. Do not expose this product to water and excessively high temperatures. Do not disassemble the system before you have unplugged the power cord. Be especially careful not to connect or disconnect any signal cables while power is applied. Failure to observe this caution may result in loud harms, buzzes, or pops that will at the very least be annoying and that in the extreme may damage your speakers.

Xbox 5.1 - Surround Sound System 3

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. Rear Panel

3 4

7 9

1 POWER: Press to switch the amplifier to standby mode. Pressing the 7 Digital In Optical 1-2; COAX: Connects to the coaxial/optical S/PDIF- Power to the OFF position turns the unit OFF. format digital outputs of sources such as Xbox or a DVD player. (Recommended if you do not plan to use the device for an extended 8 ANALOG IN: Connect to the stereo analog output from CD/DVD period of time.) players etc. 2 FUSE: US version: 125V fuse, EU version: 250V fuse 9 FRONT SPEAKERS: Connections for the front left and front right 3 HEADPHONE: Accepts stereo headphone using a standard 3.5mm speaker outputs to the corresponding satellite speakers. phone plug. 10 SURROUND SPEAKERS: Connections for the surround left and 4 DISPLAY BOX OUT: Connect the DIN output on the Display Box to the surround right speaker output to to the corresponding satellite speakers. back of the subwoofer using the supplied multi-pin DIN cable. 11 CENTER SPEAKER: Connection for the center speaker output to the 5 EXPANSION CARD SLOT: Reserved for future use. center satellite speaker. 6 USB 1.1 INPUT: Reserved for future use.

4 Xbox 5.1 - Surround Sound System

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. Display Box

1 9

2 10

3 11

4 12

5 13

6 14

7 15

8 16

1 IR RECEIVER: Receives and processes commands from the Remote 9 DISPLAY: Indicates master volume and level trim during setup. Control. 10 DOLBY DIGITAL MODE: Indicates Audio input source is Dolby Digital 2 POWER LED: Illuminates red when the Xbox 5.1 is in Standby mode; signal. green when it is powered on. 11 PROLOGIC II MODE: Indicates whether Audio Output is in Dolby Pro- 3 OPT 1/2 LED (Optical Input LED): Color indicates whether Optical 1 or Logic II Movie or Music Mode. (Green = DPLII Movie), (Red = DPLII 2 Input is selected. (Green = Optical Input 1), (Red = Optical Input 2 ). Music). 4 COAX/ANA LED (Coaxial/Analog Input LED): Color indicates whether 12 DTS MODE: Indicates Audio input source is DTS signal. Coaxial or Analog Input is selected (Green = Digital Coaxial Input), (Red 13 5.1 CH ST. (5.1 Channel Stereo Mode): Audio output is in 5.1 channel = Analog Input). stereo mode. 5 USB/AUX LED: Reserved for future use. 14 CTR (Center Speaker): Indicates Center speaker is selected for 6 TEST TONE LED: Illuminates green when the Xbox 5.1 is in Test setup. The display will show "C" to indicate adjustment of the Center Tone Mode. output channel is enabled. 7 MUTE LED: Illuminates green when the unit is in Mute Mode. 15 SURR (Surround Speakers): Indicates Surround speakers are 8 DYN. COMP LED (Dynamic Compression LED): Illuminates green selected for setup. The display will show "SR" or "SL" to indicate when the Dynamic compression feature is enabled. adjustment of the Surround Right or Surround Left output channel is enabled. 16 SUB (Subwoofer): Indicates Subwoofer is selected for setup. The display will show "S" to indicate adjustment of the Subwoofer output channel is enabled.

Xbox 5.1 - Surround Sound System 5

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. Remote Control

1 16 2 3 17 4 18

5 19 6 20 7 21 8 22 9

10 23 11 12 24

14 26 15

1 LED INDICATOR: Lights up whenever a key on the remote control is 13 TEST (Test Tone Mode): Turns on and off the Test Tone Mode, which pressed. will generate pink noise on each speaker in a sequential manner. 2 OPT 2 (Optical Input 2): Select the Digital Optical Input 2 as the audio (Please refer to the "Listening Modes" Section for more details.) input source. 14 Operation Button: Used for advanced feature menu navigation (Please 3 OPT 1 (Optical Input 1): Select the Digital Optical Input 1 as the audio refer to the "Advance Control" Section for more details.) input source. 15 MUTE: Mutes all audio outputs, including the headphone output. 4 ANALOG (Analog Input): Select the stereo analog input as the audio 16 COAX (Digital Coaxial Input): Selects the Digital Coaxial Input as the input source. audio input source. 5 SPHEREX OPTIMIZATION SETTING: Simulataneously adjusts 17 AUX: Reserved for future use. speakers relative to your listening position. Similar to Balance and 18 USB: Reserved for future use. Fader controls (Please read the "Listening Position Setting Section" for 19 POWER: Turns the Xbox 5.1 on or off. details.) 20 CTR (Center Speaker Button): Allows adjustment of the center 6 SURR. MODE (Surround Mode): Available for analog and stereo digital speaker's level relative to that of the front left and right. signals, the SURR. MODE (Surround Mode): will toggle between different DSP Modes. User can visit www.spherexinc.com to download 21 SURR (Surround Speakers Button): Allows adjustment of the surround the latest firmware to support more different surround modes.* speakers' level relative to that of the front left and right. 22 7 5.1 CH (5.1 Channel Stereo Mode): Available for analog and stereo SUB (Subwoofer Button): Allows adjustment of the subwoofer's digital signals, the 5.1CH button will enable the 5.1 channel stereo relative level. mode. (Please refer to the "Listening Modes" Section for more details.) 23 LEVEL +/- (Effect Level Buttons): Pressing the (+) or (-) key raises or 8 2.1 CH (2.1 Channel Stereo Mode): Available for analog and two- lowers the trim level of the function being adjusted. If the Xbox5.1 is in channel digital signals, the 2.1CH button will enable the 2.1 channel the Test Tone Mode, the LEVEL +/- button will adjust the individual stereo mode. (Please refer to the "Listening Modes" Section for more speaker volume levels. details.) 24 EFFECT: Switches between different sound adjustment modes, such as 9 HEADPHONE MODE: Turns on and off headphone mode. (Please refer treble "TR", bass "BS". to the "Listening Modes" Section for more details.) 25 Number Buttons: Reserved for future use. 10 VOL+/- (Volume Button): Pressing the (+) and (-) buttons raises or 26 RECORD Button: The RECORD button is used to activate the advance lowers the volume. control of the device. (Please refer to the "Advance Control" Section for 11 DYN. COMP. (Dynamic Compression Mode): Toggles the Dolby Digital more details.) Dynamic Compression Function on and off. (Please refer to the "Listening Modes" Section for more details.) 12 PLII (Pro-Logic II Mode): Available for analog and stereo digital signals, the PLII button will turn on the PLII mode and toggles between the Dolby Pro-Logic II Movie and Music Modes. (Please refer to the "Listening Modes" Section for more details.)

6 Xbox 5.1 - Surround Sound System

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. Speaker Setup

The subwoofer requires an AC power connection (do not plug it until setup is completed). All five satellite speakers and the display module connect to the subwoofer, which provides the power for all channels. Set up the speakers as follows:

1. Place the satellite speakers around the area where you will be sitting (See Diagram 1). Because of the exclusive OMNIPOLAR™ speaker technology found in the satellite speakers, you have a greater amount of flexibility in speaker placement. Please use the following guidelines only as a reference. 2. The center speaker should be directly above or below your TV or monitor (the satellites are magnetically shielded to prevent picture interference). Place the left and right front speakers to either side and equidistant from the screen. Place the surround (rear) speakers to the left and right and slightly behind the seating area and facing in toward it. If possible, all five satellites should be about the same distance from the seating area. 3. The subwoofer can go virtually anywhere that is convenient, but we recommend placing it in the front soundstage of your system and, if Balancing the Speakers possible, against a wall or in a corner. Once the speakers are connected to the rest of the system it is time to 4. Using the five supplied speaker cables, connect the outputs on the back calibrate the speakers for optimal Surround Sound. You can use your ears of the subwoofer to the matching satellites. WARNING: DO NOT TO to balance the volume levels of all of the speakers for your room and PLUG THESE CABLES INTO THE COAX IN or ANALOG IN listening position. When all of the speakers are set at the same volume CONNECTIONS. level, your system will create a more realistic, spacious surround sound 5. Using the supplied multi-pin DIN cable, connect the DIN output on the environment. back of the system control module to the DIN input on the back of the subwoofer. You will be using the remote control for this procedure:

1. Make sure the system is plugged into the wall outlet and the power switch on the back of the subwoofer is in the 'ON' position. 2. Verify that the IR Receiver box is illuminated. (If not, hit the ‘PWR’ button on the remote control.) 3. Sit in the position that you will be playing games or watching movies and eliminate as many external noises as possible 4. Press the ‘TEST’ button on the remote control to begin the test tone function. You should hear a 'static' noise travel around the room. 5. Using the Left Front Speaker as a reference, use the 'LEVEL +/-’ buttons on the remote control to calibrate all of the other speakers in the system to the same volume. 6. Hit the ‘TEST’ button to exit the speaker balancing

Speaker level adjustment without TEST TONE:

Channel level adjustments for Center, Rear and Subwoofer are available at any time by pressing the 'CTR', 'SURR' or ‘SUB’ Buttons on the remote control.

Xbox 5.1 - Surround Sound System 7

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. Speaker Setup

Adjusting Center Channel Volume Level: Adjusting Subwoofer Channel Volume Level:

1. Press the 'CTR' button on the remote control. (The Display indicates 'C') 1. Press the 'SUB' Button on the remote control. (The display indicates ‘S’, indicating that the Subwoofer channel will be adjusted.)

2. Use the 'LEVEL +/-' buttons to raise or lower the center channel level until you get the balance that you want. The display will show how much 2. Use the 'LEVEL +/-' buttons to raise or lower the subwoofer channel boost or cut you have applied, in decibels (dB). Pressing the 'CTR' level until you get the balance that you want. The display will show how button again until the CTR LED goes out will lock the setting and return much boost or cut you have applied, in decibels (dB). the volume keys to master mode, controlling overall level. To return to the factory settings, follow procedure 2 until the IR Display shows '0'.

3. Pressing the 'SUB' button again until the SUB LED goes out will lock the setting and return the volume keys to master mode, controlling overall level. To return to the factory settings, follow procedure 2 until the IR Adjusting Surround Channel Volume Level: Display shows '0'.

1. Press the 'SURR' Button on the remote control. (The display indicates ‘SR’.) indicating that the Surround Right channel will be adjusted. 2. Use the 'LEVEL +/-' buttons to raise or lower the Surround Right channel level until you get the balance that you want. 3. Press the 'SUR' Button on the remote control again to adjust the Surround Left channel. (The display indicates ‘SL’.)

4. Use the 'LEVEL +/-' buttons to raise or lower the Surround Left channel level until you get the balance that you want.

5. Pressing the ‘SURR' button again until the SURR LED goes out will lock the setting and return the volume keys to master mode, controlling overall level. To return to the factory settings, follow procedure 2 until the IR Display shows '0'.

8 Xbox 5.1 - Surround Sound System

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. Signal Input Connections

The Xbox 5.1 has five audio inputs: two Toslink optical digital, one coaxial Note on In-Game Dolby Digital: digital, and one stereo analog. To experience your game in true 5.1 surround sound you must: Use these inputs to connect audio sources, such as Xbox, DVD player, CD 1. Confirm that the game has this capability. Please check the back of the player, portable media player, computer sound card, or TV set. When game carton or contact the manufacturer of the game to confirm this feasible, use a digital input to allow for Dolby Digital and DTS playback. feature. 2. Enable the Dolby Digital and DTS function on your console. For Important Note: Each input demands a particular type of cable and a instruction on how to perform this procedure, please refer to the owner's matching output on the source component. The optical digital input requires manual accompanying the console. a Toslink fiber-optic cable. The coaxial digital input requires a coaxial cable 3. Connect your console to the Xbox 5.1 subwoofer using the supplied with RCA plugs on each end. To ensure reliable operation, use a cable 'Noodles' digital fiber optic cable. DOLBY DIGITAL AND DTS CANNOT labeled for video or digital audio connections. The stereo analog input BE PASSED USING AN ANALOG CONNECTION. requires a pair of ordinary shielded audio cables with RCA plugs on each end. If you are connecting the analog inputs to a device that has a minijack Connecting other Devices - Analog output, use the supplied miniplug-to-RCA adaptor.

Connecting your Game Console - Analog

1. Connect the Analog L/R output from your gaming console to the back 1. Connect the Analog L/R output from your A/V device to the back panel panel of the subwoofer labeled 'ANALOG IN L/R' using an analog RCA of the subwoofer labeled 'ANALOG IN L/R' using an analog RCA cable. cable. 2. To hear sound from your A/V device, ensure the power to the device is 2. To hear sound from your gaming console, ensure the power to the in the 'ON' position. console is in the 'ON' position. 3. Ensure the power to the Xbox 5.1 system is in the 'ON' position and the 3. Ensure the power to the Xbox 5.1 system is in the 'ON' position and the Green light signifying 'POWER' is illuminated on the Xbox 5.1 IR Green light signifying 'POWER' is illuminated on the Xbox 5.1 IR Receiver. Receiver. 4. Press the 'ANALOG' button on the Xbox 5.1 remote control and a Red 4. Press the 'ANALOG' button on the Xbox 5.1 remote control and a Red light will indicate the 'ANALOG' input is now selected. light will indicate that the 'ANALOG' input is now selected. 5. Use the 'VOL + / -' button to adjust the volume to the desired level. 5. Use the ‘VOL + / -’ button to adjust the volume to the desired level. Connecting other Devices - Digital Connecting your Game Console - Digitally

1. Connect the Digital output from your gaming console to the back panel of the subwoofer labeled 'OPTICAL IN 1' using the supplied digital Fiber 1. Connect the Digital output from your A/V Device to an unused digital Optic Cable. input on the back panel of the subwoofer labeled using the supplied *Please note that some consoles require the purchase of an optional digital Fiber Optic Cable. accessory for this feature. 2. To hear sound from your A/V device, ensure the power to the device is 2. To hear sound from your gaming console, ensure the power to the in the 'ON' position. console is in the 'ON' position. 3. Ensure the power to the Xbox 5.1 system is in the 'ON' position and the 3. Ensure the power to the Xbox 5.1 system is in the 'ON' position and the Green light signifying 'POWER' is illuminated on the Xbox 5.1 IR Green light signifying 'POWER' is illuminated on the Xbox 5.1 IR Receiver. Receiver. 4. Press the input button corresponding to the connection made in step 1. 4. Press the 'OPT 1' button on the Xbox 5.1 remote control and a Green 5. Use the 'VOL + / -' button to adjust the volume to the desired level. light will indicate that the 'OPT 1' input is now selected. 5. Use the 'VOL + / -' button to adjust the volume to the desired level.

Xbox 5.1 - Surround Sound System 9

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. Signal Input Connections

Note on Dolby Digital and DTS: Adjusting Bass and Treble To experience your game in true Dolby Digital or DTS surround sound you With the treble and bass enhancement feature, the user can adjust both the must: treble and the bass level to achieve optimal audio performance. 1. Confirm that the source and device have this capability. Please check the back of the carton or contact the manufacturer of the device or To adjust Bass and Treble, please use the following steps: source to confirm this feature. 2. Enable the Dolby Digital and DTS function on your device. For instruction on how to perform this procedure, please refer to the owner's manual for the device. This may require you to both: a) Enable the Dolby Digital and/or DTS bit stream on your DVD player or device. and if playing back a DVD: b) Select the appropriate Dolby Digital or DTS audio track on the DVD's onscreen menu at start up. 3. Connect your A/V device to the Xbox 5.1 subwoofer using a digital connection- either Fiber Optic or Coaxial. DOLBY DIGITAL AND DTS CANNOT BE PASSED USING AN ANALOG CONNECTION. 1. Ensure the power to the Xbox 5.1 system is in the 'ON' position and the Green light signifying 'POWER' is illuminated on the Xbox 5.1 IR Receiver. 2. To adjust BASS press the "EFFECT" Button on the remote control until the IR Receiver displays "BS". To adjust TREBLE, Press the "EFFECT" Button on the remote control until the IR Receiver displays "TR".

3. You can now adjust the level by using the LEVEL +/- keys. There are 13 steps (from +6 to -6) of effect level that can be adjusted.

4. The Xbox 5.1 will store both the treble and bass level settings, as a result, you do not need to readjust the effect level after Standby or Power Down of the device.

10 Xbox 5.1 - Surround Sound System

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. Listening Modes

Spherex Optimization Setting The Xbox 5.1 offers a Spherex Optimization adjustment function that will adjust the speakers' level to achieve the optimal sound depending on your listening position. Pressing the Reset Button will enter the Spherex Optimization adjustment mode. When you press the 'FRONT', 'REAR', 'LEFT', 'RIGHT' button on the remote control, the sound will be shifted in these directions. For Example: When the sound field is shifted forward from the center position by pressing the FRONT button, the volume level of the front speakers will be raised but the volume level of the rear speakers will be lowered. The display will show the new sound field position, such as 'N1' and then 'E0', indicating the new sound field position is shifted one step north and zero horizontal movement. To return to the original setting, just turn the control on again and adjust the level until the display shows 'N0' and then 'E0' or press the 'RESET' button.

Listening Modes

Available for analog and stereo digital signals. It reproduces the stereo signal to the front left, right 2.1 Channel Stereo Mode speakers and subwoofer without any processing to the audio signals.

Available for analog and stereo digital signals. It redistributes a stereo signal across the five 5.1 Channel Stereo Mode satellite speakers to give very broad, even coverage. All five satellites and the subwoofer are active.

Available for analog and stereo digital signals. Pressing the PLII button will enable Dolby Pro-Logic II Mode. This mode provides accurate decoding of Dolby Surround encoded signals and provides natural, realistic five-channel enhancement of stereo signals. All five satellites and the subwoofer are active. Dolby Pro-Logic II has two sub-modes: Dolby Pro-Logic II Mode Movie (Green LED) - Select for sources that have been encoded in Dolby Surround and Dolby Pro Logic II. This includes many games, TV programs, and movies on video. Music (Red LED) - This mode is especially appropriate for stereo music, to which it adds a very appealing sense of spaciousness and depth.

During the headphone mode, the Xbox 5.1 will mute the speakers and output the signal to your Headphone Mode headphones.

Dynamic compression reduces the level difference between loud and soft sounds. This can be Dynamic Compression Mode useful when you are having trouble hearing dialogue clearly or when you want to minimize disturbance of others by very loud sounds. (Compatible with Dolby Digital Encoded DVD's only)

When the Test Tone Mode is on, the Xbox 5.1 will generate pink noise on each speaker in a sequential manner. You can use this feature to verify the speakers' connections and their Test Tone Mode performance. During the Test Tone Mode, use the 'Level +/-' key to adjust the speaker's relative level to achieve the best audio performance.

Xbox 5.1 - Surround Sound System 11

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. Specifications

AUDIO section DIMENSIONS Satellites: Effective power output during STEREO operation* HxLxW: 5-1/2" x 6-1/2" x 3-1/4" 14 x 16.5 x 8.3cm FRONT Weight: 2-1/2 lbs. (118 Hz ~ 20 kHz, 0.3 % T.H.D. at one channel driven) ...... 55W + 55 W 1.1 kg SUBWOOFER (22 Hz ~ 105 Hz, 1.5 % T.H.D. at one channel driven) ...... 102 W Subwoofer: HxLxW: 16" x 9-1/4" x 16" 40.6 x 23.5 x 40.6cm Effective power output during SURROUND operation* Weight: 28 Ibs. 12.7 kg FRONT (114 Hz ~ 20 kHz, 0.3 % T.H.D. at one channel driven) ...... 55W + 55 W Over Carton: CENTER LxWxH: 21-1/4" x 20-3/4" x 19-1/4" (118 Hz ~ 20 kHz, 0.3 % T.H.D. at one channel driven) ...... 55 W 54 x 52.7 x 48.9cm SURROUND Weight: 60 lbs. (140 Hz ~ 20 kHz, 0.3% T.H.D. at one channel driven) ...... 16 W + 16 W 27.2 kg SUBWOOFER (22 Hz ~ 105 Hz, 1.5 % T.H.D. at one channel driven) ...... 102 W

FRONT (1 kHz, 10 % T.H.D. at one channel driven) ...... 70 W + 70 W CENTER (1 kHz, 10 % T.H.D. at one channel driven) ...... 70 W SURROUND (1 kHz, 10 % T.H.D. at one channel driven) ...... 24 W + 24 W SUBWOOFER (100 Hz, 10 % T.H.D. at one channel driven) ...... 110 W

*Please note that MaxxBass processing will psycho-acoustically extend perceived low frequency response.

Frequency response Line (Optical 1, Optical 2, Coaxial, Analog) ...... 10 Hz ~ 100 kHz, 0 dB ~ -3.0 dB Tone control BASS...... ±12 dB (at 100 Hz) TREBLE ...... ±12 dB (at 10 kHz)

DIGITAL AUDIO section Sampling frequency ...... 32 kHz, 44.1 kHz, 48 kHz Input level / impedance / wave length Optical ...... (-15 dBm ~ -24 dBm), 700 nm ±30 nm Coaxial ...... 0.5 Vp-p / 75 ohms

GENERAL Power consumption Xbox 5.1 ...... 3.5 A Xbox 5.1 ...... 420 W Standby Power consumption ...... less than 60W

Specifications Subject to Change Without Notice.

Xbox 5.1 - Surround Sound System 12

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. Limited Warranty

Terms and Conditions

This Limited Warranty applies to the registered warrantable items indicated Conditions and Exclusions: on the original invoice (unless otherwise specified). The following conditions will apply: Terms: a) This Limited Warranty does not cover improper or abusive use of the In North America, Spherex Inc. (SPHEREX) warrants to the original product, modification, liquid damage, damage as a result of droppage or purchaser (OWNER) of the product(s) covered by this Limited Warranty that foreign objects found inside the product; the product(s) shall conform to the manufacturer's specifications and be free b) The OWNER releases SPHEREX from all liability due to damage to the from defect in material and workmanship for a period of 90 days in total and product, replacement of the product or injury to any person that is not subject to the conditions included herein. The Limited Warranty begins on due to the fault of SPHEREX the registration date of the product and this Limited Warranty and is c) The OWNER further understands that SPHEREX is not responsible for between SPHEREX and the OWNER. The owner must register the product any indirect, consequential or incidental damages. Some states do not within five (5) days of the purchase date of the product for this Limited allow the exclusion or limitation of incidental or consequential damages, Warranty to be valid. The cost of shipping a replacement or repaired product so the above limitation or exclusion may not apply to you; back to the OWNER is covered under this Limited Warranty. If the OWNER d) Any loss resulting from transportation damage, collision with another requests repair or replacement under this Limited Warranty and, if after object or any damage while the product is in transit is excluded; examining the product, the cause of failure of the product is excluded by the e) Any loss resulting from fire, flood, earthquake, lightning, acts of God, terms and conditions of this Limited Warranty, the OWNER will be and/or improper electrical current is excluded; responsible for all costs incurred. The OWNER consents to the use and f) Any loss resulting from recall or rework, regardless of SPHEREX's transmission of OWNER's confidential information only in connection with ability to pay for such repairs is excluded; the Limited Warranty. g) Set up or installation or re-installation charges incurred are not covered under this Limited Warranty; Outside of North America, please contact your local dealer or distributor for h) Repairs required due to the deterioration of the appearance of the warranty details. product are excluded; i) SPHEREX reserves the right to replace your product with a comparable Claim Procedure: feature model of like kind and quality. Product replacement will fulfill this agreement in its entirety and will discharge all further obligations under If calling from North America please call SPHEREX at (416) 321-6211. If this Limited Warranty; calling from outside of North America, please contact your local dealer or j) SPHEREX reserves the right to use replacement parts that are new, distributor. refurbished or non-original manufacturer's parts that perform to the The OWNER will be liable for all costs incurred to ship the covered product. factory specifications; Proof of purchase (invoice) for the product and the claim number must be k) Products used for commercial purposes are excluded; mailed with the defective product in order to qualify for a repair or l) The maximum liability of this Limited Warranty shall not exceed the replacement under this Limited Warranty. The product must be shipped in its original purchase price paid for the product. original packaging to qualify under this Limited Warranty. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

13 Xbox 5.1 - Surround Sound System

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. FAQ Section

Symptom Cause Remedy

The speaker cords are disconnected. Connect speakers properly referring to VOLUME is set to the minimum position. 'Speaker Setup" MUTE is ON. Turn OFF the MUTE. The Power on the Xbox 5.1 or Source is OFF. Turn power of unit and source to ON No sound from the speakers.

The speaker cord is disconnected. Connect it properly referring to Speaker Setup Sound is not output from one of the speakers.

The surround speaker cords and/or the Connect speakers properly referring to center speaker cord are disconnected. 'Speaker Setup" A surround mode has not been engaged. Adjust the speaker levels using the test tone Sound is not output from the surround The surround and/or center volume controls speakers and / or the center speaker, or their are set to the minimum level. sound is very low.

The console is not configured to output Dolby Configure the gaming console to output Dolby Digital or DTS Digital and DTS Sound The game does not contain a Dolby Digital Check to see if the game contains in game audio track Dolby Digital I am not able to hear Dolby Digital sound from my gaming console

The DVD Player is not configured to output Configure your DVD player using the DVD Dolby Digital or DTS Players Owners Manual or contact the The DVD does not contain a Dolby Digital or manufacturer DTS audio track I am not able to hear Dolby Digital or DTS Check to see if the DVD disc contains a Dolby Digital or DTS Track from my DVD Player The DVD player is not connected using a digital cable- fiber optic or coaxial Connect the DVD player to the Xbox 5.1 using a digital connection

The remote control unit is too far away from Operate the remote control unit within the the main system, controlling angle is too controllable range. large, or there is an obstacle between the Replace with new batteries. receiver and the remote. Press any of the input keys or to activate the Remote control operation is not possible. Batteries are exhausted. operation mode for the component you want The remote control has not been set to the to control before operation operation mode for the component you wish to control.

If, after attempting to remedy the problem, it still persists, please contact SPHEREX at (416) 321-6211 within North America. Outside of North America, please contact your local dealer or distributor.

Xbox 5.1 - Surround Sound System 14

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries. Spherex and the Spherex logo are trademarks of Spherex Inc.

DDX® is a registered trademark of Apogee Game Audio Network Guild (G.A.N.G.) Technology, Inc. The world's most prolific and talented music, audio and interactive entertainment industry professionals are joined together as members of the Game Audio Network Guild (G.A.N.G.). G.A.N.G. is an international, professional, non-profit trade organization dedicated to raising the bar for audio development in the interactive world. The individuals who make up MaxxBass and Maxx logo are registered G.A.N.G understand the power of audio and its importance in making trademarks for Waves Audio Ltd. interactive media a gratifying and provocative experience. G.A.N.G. is determined to better the current state of interactive audio by providing resources, education and information for the entire gaming industry and community. As a guild, G.A.N.G. helps to change the way people experience interactive media. As a network, they help each other achieve The TI logo is a trademark of Texas Instruments. new successes in their own professional endeavors.

G.A.N.G. & Spherex

Spherex approached G.A.N.G. regarding a revolutionary idea. They wanted Dolby, Pro Logic, and the double-D symbol are to develop an amazing speaker system specifically for gaming. Spherex trademarks of Dolby Laboratories. believes deeply in G.A.N.G.'s mission to bring improvement to the game audio arena and felt that they were contributing to that mission by developing speakers worthy of cutting-edge audio found in interactive entertainment today. DTS and DTS Digital Surround are trademarks of The G.A.N.G. membership boasts numerous experts in the fields of game Digital Theater Systems, Inc. Copyright 1996, 2003 audio production, consumer product development and speaker design. Digital Theater Systems, Inc. All Rights Reserved. G.A.N.G. put together a handpicked advisory committee that would go on to help advise and give input into the development process of the Xbox 5.1 Surround Sound System.

For more information regarding G.A.N.G. or to become a member please visit www.audiogang.org

15 Xbox 5.1 - Surround Sound System

Microsoft, Xbox and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or in other countries.