DOCSLIB.ORG

Geomatics on the Move Competition

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Geomatics on the Move Competition Geomatics on the move Competition: boosting GNSS-based applications P R E S S B A C K G R O U N D E R The Geomatics Competition Grounded in traditional land surveying disciplines, the geomatics field has evolved and grown together with advances in technology, implementing new tools and techniques to capture, process and draw meaningful insights from data. It integrates the skills and knowledge from the disciplines of land surveying, cadastre, cartography & mapping, geodesy, topography, GIS, photogrammetry, remote sensing, urban planning, and other applications. Many of the geomatics applications benefit also from the European navigation programmes Galileo and EGNOS. Surveying, for example, has been an early adopter and leverages highly on the high-precision positioning of Galileo and EGNOS to develop new services and applications. Another source of geospatial data is Copernicus and its services, providing valuable information of the Earth’s surface or digital elevation models among many other data products. Through this Contest, “Geomatics on the Move”, the GSA, in collaboration with the Council of European Geodetic Surveyors (CLGE)1, encourages participants to explore the use of the European navigation programmes Galileo and EGNOS and their synergies with Copernicus, by submitting innovative surveying solutions, to shape the future of geomatics. The objectives of this Contest are to increase the usage of Galileo, EGNOS in the field of Geomatics, as well as to increase awareness of the benefits these EU Space Programmes provide toward fostering innovative geomatics applications. How does it work? The aim of the contest is to create innovative geomatics applications and solutions, using Galileo and EGNOS. Solutions must demonstrate their novel approach to the use of satellite data for the geomatics field, while ensuring that their technical feasibility is accurate and will have maximal practical impact on the sector. The contest invites also applications that integrate the use of additional technologies - using Galileo or EGNOS - such as artificial intelligence, machine learning, augmented reality and virtual reality, as well as supplementary remote sensing data sources like drones and Copernicus data. Solutions animated through mobile phone applications or other easy-to-use platforms are also welcome. 1 https://www.clge.eu/ 1 In the context of the Geomatics on the Move, in total ten (10) prizes will be given to applications received in the following two (2) categories: • Traditional Geomatics: five (5) prizes will be given to solutions which main innovation is based on the usage of EGNSS, employing traditional equipment such as surveying or GIS grade GNSS Receivers for applications such as cadastral, marine and mining surveying or GIS mapping. These solutions can be supported or combined with Copernicus satellites data; • Integrated Geomatics: five (5) prizes will be given to integrated surveying solutions that use Galileo or EGNOS, leveraging cutting-edge tools and technologies like drones, mobile mapping, laser scanners or Augmented/Mixed Reality that can either be used within geomatics applications or beyond. These solutions can be supported or combined with Copernicus satellites data; The competition rolls out in two phases. • Phase 1 – Open Call for Ideas: applicants shall submit a poster in a pre-defined format describing the idea. • Phase 2 – Pitch Preparation Phase / Finals: During this phase, the selected applicants will refine their poster and prepare their pitch deck. The teams will receive technical assistance consisting of support with the graphic design of the poster, and a pitch training. The finalists will be provided with information via email about the award ceremony and the logistics details. The official award of the Geomatics on the Move Prize Contest will take place virtually, during the European Space Week (7th-11th December 2020). During this event, each finalist will present its solution to the evaluation board (and interested audience). The winners of the two prizes will be selected based on the award criteria listed below and awarded. Winners will be announced on the official contest site and promoted in official channels. For more information: www.gsa.europa.eu/geomaticsonthemove Terms of references of the competition https://www.gsa.europa.eu/sites/default/files/uploads/geomatics_prize_terms_of_reference.pdf The Prizes Each applicant participating in the Finals will receive a certificate of reaching the final stage. Additionally, the winner teams of the Geomatics on the Move Prize Contest will receive the following prizes: • 1st Prize of the Traditional Geomatics solution: € 5.000 (five thousand Euro) • 2nd Prize of the Traditional Geomatics solution: € 4.000 (four thousand Euro) • 3rd Prize of the Traditional Geomatics solution: € 3.000 (three thousand Euro) • 4th Prize of the Traditional Geomatics solution: € 2.000 (two thousand Euro) • 5th Prize of the Traditional Geomatics solution: € 1.000 (one thousand Euro) • 1st Prize of the Integrated Geomatics solution: € 5.000 (five thousand Euro) 2 • 2nd Prize of the Integrated Geomatics solution: € 4.000 (four thousand Euro) • 3rd Prize of the Integrated Geomatics solution: € 3.000 (three thousand Euro) • 4th Prize of the Integrated Geomatics solution: € 2.000 (two thousand Euro) • 5th Prize of the Integrated Geomatics solution: € 1.000 (one thousand Euro) Strengthen the field of geomatics using innovative data sources The expanding field of geomatics has evolved dramatically thanks to significant advancements in technology, tools and techniques. Progressing from traditional mapping to the improved data capture and analysis we see today, the strength of geomatics relies on skills and knowledge found in many earth science-related disciplines such as land surveying and earth mapping. Combined with the enhanced accuracy and coverage that European space programmes Galileo, EGNOS and Copernicus provide, geomatics solutions have the power to shape the future of industry. Geomatics on the Move is an ideas competition with the opportunity to bring their cutting-edge data capture and analysis solutions to life. Timeline 01/08/2020: Announcement of Contest 16/10/2020: Submission deadline 30/10/2020: Announcement of selected teams to proceed to Finals 7-11/12/2020: Contest Final GNSS for Geomatics applications and services: key figures Geomatics professionals already benefit from using EGNSS in a multi-constellation environment, providing higher availability, continuity, reliability and better results in harsh conditions. This is confirmed by a gradual penetration of Galileo in GNSS receivers for surveying and mapping: as of today, around 55% of the surveying GNSS receivers already support Galileo and around 90% are EGNOS-capable. In Europe, the majority of RTK providers have already upgraded or have started to upgrade to Galileo. This example is followed by major PPP and PPP-RTK providers that also support Galileo in their correction services. From the ground to the cloud: the digital transformation of surveying: The role of the traditional GNSS surveying is undergoing a rapid transformation thanks to the integration of emerging digital data collection techniques. Geomatics applications that rely on GNSS in combination with terrestrial or airborne sensors (optical, multispectral, RADAR or LiDAR) are focusing the implementation of solutions directly in the cloud. Geomatics is an important cross-sector enabler: Geomatics is a highly demanding segment, which provides other business sectors (such as autonomous driving and drones) with precise GNSS data and versatile consultation services. This cross-sectoral integration is empowered by the implementation of emerging business models, such as Capability as-a-Service. 3 The downstream GNSS market is empowered by the 4th Industrial Revolution: The 4th Industrial Revolution is a term that describes the profound economic impact from the radical growth of device interconnectivity and the incorporation of sensors, robots and powerful data analytics. Prime examples in Geomatics are the sophisticated products which fuse high-precision GNSS data with machines, inertial sensors, robotics and artificial intelligence (e.g. mobile mapping systems). The uptake of Building Information Modelling (BIM) and its integration with high-precision GNSS observations provide unprecedented levels of automation, interoperability and optimised decision making for the surveying and construction industry. The installed base of GNSS devices will reach 4 million units by 2025, generating more than 5.5 billion revenues in GNSS device sales. Although the market continues to be dominated by the established players, emerging companies from China and Europe are starting to effect a slight market reshaping. European companies now hold almost half of the market (43%), with North American players accounting for 29%, followed closely by Asian firms with 28% of worldwide production. (Source: GSA Market report 2019). The European GNSS Agency (GSA) www.gsa.europa.eu The European GNSS Agency (GSA), is the European Union Agency in charge of managing operations, security and service provision for Europe’s Global Navigation Satellite System (GNSS), Galileo and EGNOS. By working with stakeholders, industry, service providers and user communities, the GSA ensures the highest return on European GNSS investment, multiplying the benefits of space applications for European citizens and business, boosting innovation and competitiveness, and securing sustainable
Load more

Recommended publications
  • UCGE Reports Ionosphere Weighted Global Positioning System Carrier
    UCGE Reports Number 20155 Ionosphere Weighted Global Positioning System Carrier Phase Ambiguity Resolution (URL: http://www.geomatics.ucalgary.ca/links/GradTheses.html) Department of Geomatics Engineering By George Chia Liu December 2001 Calgary, Alberta, Canada THE UNIVERSITY OF CALGARY IONOSPHERE WEIGHTED GLOBAL POSITIONING SYSTEM CARRIER PHASE AMBIGUITY RESOLUTION by GEORGE CHIA LIU A THESIS SUBMITTED TO THE FACULTY OF GRADUATE STUDIES IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF SCIENCE DEPARTMENT OF GEOMATICS ENGINEERING CALGARY, ALBERTA OCTOBER, 2001 c GEORGE CHIA LIU 2001 Abstract Integer Ambiguity constraint is essential in precise GPS positioning. The perfor- mance and reliability of the ambiguity resolution process are being hampered by the current culmination (Y2000) of the eleven-year solar cycle. The traditional approach to mitigate the high ionospheric effect has been either to reduce the inter-station separation or to form ionosphere-free observables. Neither is satisfactory: the first restricts the operating range, and the second no longer possesses the ”integerness” of the ambiguities. A third generalized approach is introduced herein, whereby the zero ionosphere weight constraint, or pseudo-observables, with an appropriate weight is added to the Kalman Filter algorithm. The weight can be tightly fixed yielding the model equivalence of an independent L1/L2 dual-band model. At the other extreme, an infinite floated weight gives the equivalence of an ionosphere-free model, yet perserves the ambiguity integerness. A stochastically tuned, or weighted, model provides a compromise between the two ex- tremes. The reliability of ambiguity estimates relies on many factors, including an accurate functional model, a realistic stochastic model, and a subsequent efficient integer search algorithm.
    [Show full text]
  • Geomatics Guidance Note 3
    Geomatics Guidance Note 3 Contract area description Revision history Version Date Amendments 5.1 December 2014 Revised to improve clarity. Heading changed to ‘Geomatics’. 4 April 2006 References to EPSG updated. 3 April 2002 Revised to conform to ISO19111 terminology. 2 November 1997 1 November 1995 First issued. 1. Introduction Contract Areas and Licence Block Boundaries have often been inadequately described by both licensing authorities and licence operators. Overlaps of and unlicensed slivers between adjacent licences may then occur. This has caused problems between operators and between licence authorities and operators at both the acquisition and the development phases of projects. This Guidance Note sets out a procedure for describing boundaries which, if followed for new contract areas world-wide, will alleviate the problems. This Guidance Note is intended to be useful to three specific groups: 1. Exploration managers and lawyers in hydrocarbon exploration companies who negotiate for licence acreage but who may have limited geodetic awareness 2. Geomatics professionals in hydrocarbon exploration and development companies, for whom the guidelines may serve as a useful summary of accepted best practice 3. Licensing authorities. The guidance is intended to apply to both onshore and offshore areas. This Guidance Note does not attempt to cover every aspect of licence boundary definition. In the interests of producing a concise document that may be as easily understood by the layman as well as the specialist, definitions which are adequate for most licences have been covered. Complex licence boundaries especially those following river features need specialist advice from both the survey and the legal professions and are beyond the scope of this Guidance Note.
    [Show full text]
  • PRINCIPLES and PRACTICES of GEOMATICS BE 3200 COURSE SYLLABUS Fall 2015
    PRINCIPLES AND PRACTICES OF GEOMATICS BE 3200 COURSE SYLLABUS Fall 2015 Meeting times: Lecture class meets promptly at 10:10-11:00 AM Mon/Wed in438 Brackett Hall and lab meets promptly at 12:30-3:20 PM Wed at designated sites Course Basics Geomatics encompass the disciplines of surveying, mapping, remote sensing, and geographic information systems. It’s a relatively new term used to describe the science and technology of dealing with earth measurement data that includes collection, sorting, management, planning and design, storage, and presentation of the data. In this class, geomatics is defined as being an integrated approach to the measurement, analysis, management, storage, and presentation of the descriptions and locations of spatial data. Goal: Designed as a "first course" in the principles of geomeasurement including leveling for earthwork, linear and area measurements (traversing), mapping, and GPS/GIS. Description: Basic surveying measurements and computations for engineering project control, mapping, and construction layout. Leveling, earthwork, area, and topographic measurements using levels, total stations, and GPS. Application of Mapping via GIS. 2 CT2: This course is a CT seminar in which you will not only study the course material but also develop your critical thinking skills. Prerequisite: MTHSC 106: Calculus of One Variable I. Textbook: Kavanagh, B. F. Surveying: Principles and Applications. Prentice Hall. 2010. Lab Notes: Purchase Lab notes at Campus Copy Shop [REQUIRED]. Materials: Textbook, Lab Notes (must be brought to lab), Field Book, 3H/4H Pencil, Small Scale, and Scientific Calculator. Attendance: Regular and punctual attendance at all classes and field work is the responsibility of each student.
    [Show full text]
  • Geodetic Position Computations
    GEODETIC POSITION COMPUTATIONS E. J. KRAKIWSKY D. B. THOMSON February 1974 TECHNICALLECTURE NOTES REPORT NO.NO. 21739 PREFACE In order to make our extensive series of lecture notes more readily available, we have scanned the old master copies and produced electronic versions in Portable Document Format. The quality of the images varies depending on the quality of the originals. The images have not been converted to searchable text. GEODETIC POSITION COMPUTATIONS E.J. Krakiwsky D.B. Thomson Department of Geodesy and Geomatics Engineering University of New Brunswick P.O. Box 4400 Fredericton. N .B. Canada E3B5A3 February 197 4 Latest Reprinting December 1995 PREFACE The purpose of these notes is to give the theory and use of some methods of computing the geodetic positions of points on a reference ellipsoid and on the terrain. Justification for the first three sections o{ these lecture notes, which are concerned with the classical problem of "cCDputation of geodetic positions on the surface of an ellipsoid" is not easy to come by. It can onl.y be stated that the attempt has been to produce a self contained package , cont8.i.ning the complete development of same representative methods that exist in the literature. The last section is an introduction to three dimensional computation methods , and is offered as an alternative to the classical approach. Several problems, and their respective solutions, are presented. The approach t~en herein is to perform complete derivations, thus stqing awrq f'rcm the practice of giving a list of for11111lae to use in the solution of' a problem.
    [Show full text]
  • Determination of GPS Session Duration in Ground Deformation Surveys in Mining Areas
    sustainability Article Determination of GPS Session Duration in Ground Deformation Surveys in Mining Areas Maciej Bazanowski 1, Anna Szostak-Chrzanowski 2,* and Adam Chrzanowski 1 1 Department of Geodesy and Geomatics Engineering, University of New Brunswick, P.O. Box 4400, Fredericton, N.B., E3B 5A3, N.B., Canada; [email protected] (M.B.); [email protected] (A.C.) 2 Faculty of Geoengineering, Mining and Geology, Wrocław University of Science and Technology„ul. Na Grobli 15, 50-421Wrocław, Poland * Correspondence: [email protected] Received: 18 September 2019; Accepted: 25 October 2019; Published: 3 November 2019 Abstract: Extraction of underground minerals causes subsidence of the ground surface due to gravitational forces. The subsidence rate depends on the type of extracted ore, as well as its shape, thickness, and depth. Additionally, the embedding and overburden rock properties influence the time needed for the deformations to reach the surface. Using the results of geodetic deformation monitoring, which supply the information on pattern and magnitude of surface deformation, the performance of the mine may be evaluated. The monitoring can supply information on the actual rock mass behaviour during the operation and in many cases during the years after the mining operations have ceased. Geodetic methods of deformation monitoring supply information on the absolute and relative displacements (changes in position in a selected coordinate system) from which displacement and strain fields for the monitored object may be derived. Thus, geodetic measurements provide global information on absolute and relative displacements over large areas, either at discrete points or continuous in the space domain. The geodetic methods are affected by errors caused by atmospheric refraction and delay of electromagnetic signal.
    [Show full text]
  • Coordinate Systems in Geodesy
    COORDINATE SYSTEMS IN GEODESY E. J. KRAKIWSKY D. E. WELLS May 1971 TECHNICALLECTURE NOTES REPORT NO.NO. 21716 COORDINATE SYSTElVIS IN GEODESY E.J. Krakiwsky D.E. \Vells Department of Geodesy and Geomatics Engineering University of New Brunswick P.O. Box 4400 Fredericton, N .B. Canada E3B 5A3 May 1971 Latest Reprinting January 1998 PREFACE In order to make our extensive series of lecture notes more readily available, we have scanned the old master copies and produced electronic versions in Portable Document Format. The quality of the images varies depending on the quality of the originals. The images have not been converted to searchable text. TABLE OF CONTENTS page LIST OF ILLUSTRATIONS iv LIST OF TABLES . vi l. INTRODUCTION l 1.1 Poles~ Planes and -~es 4 1.2 Universal and Sidereal Time 6 1.3 Coordinate Systems in Geodesy . 7 2. TERRESTRIAL COORDINATE SYSTEMS 9 2.1 Terrestrial Geocentric Systems • . 9 2.1.1 Polar Motion and Irregular Rotation of the Earth • . • • . • • • • . 10 2.1.2 Average and Instantaneous Terrestrial Systems • 12 2.1. 3 Geodetic Systems • • • • • • • • • • . 1 17 2.2 Relationship between Cartesian and Curvilinear Coordinates • • • • • • • . • • 19 2.2.1 Cartesian and Curvilinear Coordinates of a Point on the Reference Ellipsoid • • • • • 19 2.2.2 The Position Vector in Terms of the Geodetic Latitude • • • • • • • • • • • • • • • • • • • 22 2.2.3 Th~ Position Vector in Terms of the Geocentric and Reduced Latitudes . • • • • • • • • • • • 27 2.2.4 Relationships between Geodetic, Geocentric and Reduced Latitudes • . • • • • • • • • • • 28 2.2.5 The Position Vector of a Point Above the Reference Ellipsoid . • • . • • • • • • . .• 28 2.2.6 Transformation from Average Terrestrial Cartesian to Geodetic Coordinates • 31 2.3 Geodetic Datums 33 2.3.1 Datum Position Parameters .
    [Show full text]
  • Geomatics Engineering Students: Corey C
    Geomatics Engineering Students: Corey C. Pippin Advisors: Dr. James K. Crossfield Abstract Project Background Project Area Static GPS observations were used to monitor crustal motion along the San Andreas The San Andreas Fault system is a right-lateral strike slip fault that that extends from Fault near Hollister, California. The points span both sides of the fault. Three 60 the Salton Sea to the San Francisco Bay area. This fault is caused by the boundary of minute GPS observation sessions were conducted, and the relative positions of the Pacific and North American tectonic plates. The Fault has zones that are locked National Geodetic Survey monuments were precisely determined. Those coordinates and that creep. Surface displacement can be monitored to determine accurate were compared to known monument locations (adjusted to NAD83 in 1992) to locations of survey monuments. quantify the relative motion of the fault zone. The distance and direction of the tectonic motion in this region was calculated. With the collected static data, processed using Trimble Geomatics Office software, the study region was observed to have movement of 1.223 feet (37.277 cm) (averaged) during the 22 years between observation periods. This equates to a movement of 0.0554 feet or 1.69 centimeters per year. Near the DeRose Winery, 8.8 miles south of Hollister, California, four National Field Reconnaissance Geodetic Survey (NGS) monuments (Taylor 5, 6, 7, & 8) were set in 1957. They were originally Purposed to monitor movement in the area, and two points lie on either side of the fault zone. The points have coordinates that were adjusted in 1992.
    [Show full text]
  • Style Manual for the Department of Geodesy and Geomatics Engineering
    STYLE MANUAL FOR THE DEPARTMENT OF GEODESY AND GEOMATICS ENGINEERING WENDY WELLS November 2001 TECHNICALLECTURE NOTES REPORT NO.NO. 21754 STYLE MANUAL FOR THE DEPARTMENT OF GEODESY AND GEOMATICS ENGINEERING Wendy Wells Department of Geodesy and Geomatics Engineering University of New Brunswick P.O. Box 4400 Fredericton, N.B. Canada E3B SA3 Fifth Edition November 2001 © Wendy Wells, 2001 PREFACE In order to make our extensive series of lecture notes more readily available, we have scanned the old master copies and produced electronic versions in Portable Document Format. The quality of the images varies depending on the quality of the originals. In this version, images have been converted to searchable text. GEODESY AND GEOMATICS ENGINEERING STYLE MANUAL Lecture Notes No. 54 ABSTRACT Although the 'technological revolution' has pushed the humanities into the background, there still remains a need for people to communicate with each other. Just as a computer language must be correct and precise if the program is to function properly, so must the English language be used as clearly, precisely, and correctly as possible if new ideas, inventions, techniques, methods, and results are to be read and accepted into the universal body of human knowledge. In an endeavour to provide a little help in making undergraduate report and assignment and graduate report, paper, and thesis writing less of an ordeal, this style manual has been compiled with the geomatician specifically in mind. As geodesy and geomatics engineering are not large enough fields to demand their own form and format, those of mathematics, physics, and law, the basic underpinnings of geodesy and geomatics, have been adapted for use here.
    [Show full text]
  • Utilizing Airborne Lidar and UAV Photogrammetry Techniques in Local Geoid Model Determination and Validation
    International Journal of Geo-Information Article Utilizing Airborne LiDAR and UAV Photogrammetry Techniques in Local Geoid Model Determination and Validation Serdar Erol * , Emrah Özögel, Ramazan Alper Kuçak and Bihter Erol Geomatics Engineering Department, Civil Engineering Faculty, Istanbul Technical University, 34469 Maslak, Istanbul, Turkey; [email protected] (E.Ö.); [email protected] (R.A.K.); [email protected] (B.E.) * Correspondence: [email protected]; Tel.: +90-212-285-3826 Received: 24 July 2020; Accepted: 30 August 2020; Published: 2 September 2020 Abstract: This investigation evaluates the performance of digital terrain models (DTMs) generated in different vertical datums by aerial LiDAR and unmanned aerial vehicle (UAV) photogrammetry techniques, for the determination and validation of local geoid models. Many engineering projects require the point heights referring to a physical surface, i.e., geoid, rather than an ellipsoid. When a high-accuracy local geoid model is available in the study area, the physical heights are practically obtained with the transformation of global navigation satellite system (GNSS) ellipsoidal heights of the points. Besides the commonly used geodetic methods, this study introduces a novel approach for the determination and validation of the local geoid surface models using photogrammetry. The numeric tests were carried out in the Bergama region, in the west of Turkey. Using direct georeferenced airborne LiDAR and indirect georeferenced UAV photogrammetry-derived point clouds, DTMs were generated in ellipsoidal and geoidal vertical datums, respectively. After this, the local geoid models were calculated as differences between the generated DTMs. Generated local geoid models in the grid and pointwise formats were tested and compared with the regional gravimetric geoid model (TG03) and a high-resolution global geoid model (EIGEN6C4), respectively.
    [Show full text]
  • Uk Offshore Operators Association (Surveying and Positioning
    U.K. OFFSHORE OPERATORS ASSOCIATION (SURVEYING AND POSITIONING COMMITTEE) GUIDANCE NOTES ON THE USE OF CO-ORDINATE SYSTEMS IN DATA MANAGEMENT ON THE UKCS (DECEMBER 1999) Version 1.0c Whilst every effort has been made to ensure the accuracy of the information contained in this publication, neither UKOOA, nor any of its members will assume liability for any use made thereof. Copyright ã 1999 UK Offshore Operators Association Prepared on behalf of the UKOOA Surveying and Positioning Committee by Richard Wylde, The SIMA Consultancy Limited with assistance from: Roger Lott, BP Amoco Exploration Geir Simensen, Shell Expro A Company Limited by Guarantee UKOOA, 30 Buckingham Gate, London, SW1E 6NN Registered No. 1119804 England _____________________________________________________________________________________________________________________Page 2 CONTENTS 1. INTRODUCTION AND BACKGROUND .......................................................................3 1.1 Introduction ..........................................................................................................3 1.2 Background..........................................................................................................3 2. WHAT HAS HAPPENED AND WHY ............................................................................4 2.1 Longitude 6°W (ED50) - the Thunderer Line .........................................................4 3. GUIDANCE FOR DATA USERS ..................................................................................6 3.1 How will we map the
    [Show full text]
  • Basic Performance and Future Developments of Beidou Global Navigation Satellite System Yuanxi Yang* , Yue Mao and Bijiao Sun
    Yang et al. Satell Navig (2020) 1:1 https://doi.org/10.1186/s43020-019-0006-0 Satellite Navigation https://satellite-navigation.springeropen.com/ ORIGINAL ARTICLE Open Access Basic performance and future developments of BeiDou global navigation satellite system Yuanxi Yang* , Yue Mao and Bijiao Sun Abstract The core performance elements of global navigation satellite system include availability, continuity, integrity and accuracy, all of which are particularly important for the developing BeiDou global navigation satellite system (BDS- 3). This paper describes the basic performance of BDS-3 and suggests some methods to improve the positioning, navigation and timing (PNT) service. The precision of the BDS-3 post-processing orbit can reach centimeter level, the average satellite clock ofset uncertainty of 18 medium circular orbit satellites is 1.55 ns and the average signal-in- space ranging error is approximately 0.474 m. The future possible improvements for the BeiDou navigation system are also discussed. It is suggested to increase the orbital inclination of the inclined geostationary orbit (IGSO) satellites to improve the PNT service in the Arctic region. The IGSO satellite can perform part of the geostationary orbit (GEO) satellite’s functions to solve the southern occlusion problem of the GEO satellite service in the northern hemisphere (namely the “south wall efect”). The space-borne inertial navigation system could be used to realize continuous orbit determination during satellite maneuver. In addition, high-accuracy space-borne hydrogen clock or cesium clock can be used to maintain the time system in the autonomous navigation mode, and stability of spatial datum. Further- more, the ionospheric delay correction model of BDS-3 for all signals should be unifed to avoid user confusion and improve positioning accuracy.
    [Show full text]
  • Distance Mapping in Health and Healthcare
    SAS Global Forum 2011 Reporting and Information Visualization Paper 299-2011 Distance Mapping in Health and Health Care: SAS® as a Tool for Health Geomatics Barbara B. Okerson, WellPoint/HMC, Richmond, VA ABSTRACT Geomatics is the science concerned with using mathematical methods with spatial data to learn about the earth's surface. Health geomatics is used to improve the understanding of relationships between people, location, time, and health. Geomaticists assist in discovering and eliminating disease, aid in public health disease prevention and health promotion initiatives, and support healthcare service planning and delivery through defining spatial relationships. Distance mapping is one of many tools in the geomatics toolbox that furthers this understanding. SAS® provides a comprehensive set of graphics tools and procedures as part of the SAS/GRAPH® product that can be used for distance mapping, including the new GEOCODE procedure and the GEODIST function, available with SAS 9.2. This paper combines the graphics available in SAS/GRAPH with other available SAS tools to explore spatial relationships in the health care arena. Examples include maps, grid squares, area charts, and X-Y plots. The analytic graphics in this paper were developed with version 9.1.3 or 9.2 of SAS executing on a Windows XP platform. SAS 9.2 is required for the GEOCODE procedure. The graphics represented in this paper are not platform- specific and can be adapted by both beginning and advanced SAS users. BACKGROUND Health, disease, and health care differ from place to place and from time to time. While undertaking the analysis of the relationships between health and locations, practitioners in the field of health geomatics can be divided into two distinct areas of study: those seeking information about the geography of disease and those involved with the geography of health care systems; the former concerns itself with the health conditions of a place and the latter is concerned with the response to those health conditions in terms of planning, intervention and infrastructure.
    [Show full text]