INNOVATION DRIVES YOU FORWARD Hanging-C

From abattoirs to meat processing sites, specific methods of transport must be used to «carry» quarters of meat in optimal conditions. Loads are no longer placed on the floor, but are instead hung from the ceiling. is not transported in the same way as or lamb, and is different again if the legs are to be processed into . Compatibility between the abattoir and vehicle networks call for sophisticated, embedded distribution and connection devices. The distribution of meat quarters to requires other, even more specialised, means of carrying and handling. On the basis of its many years of experience in meat transport methods, CHEREAU has provided an EXPERT response in its Meat Hanging-C body.

The solution The benefits

Whether with tubular hanging rails for pork (40/49 or 50/60 diameter), the • Specific carrier body structure Bi-Rails device for beef, or slide rails for lamb, CHEREAU Meat Hanging-C • Maximum isothermal performance (FRC) bodies provide the best-adapted solution to meet client requirements. Fitted • Combined with a specially-calculated carrier (SR chassis or with directional switches and interchangeable connectors, the Meat Hanging-C truck understructure) body ensures both long life and controlled operating costs, whilst strictly • Compatible with SR retracted chassis (extensive inside complying with the hygiene regulations laid down by the ATP. height>2.60 m) Whether for long-distance transport in semitrailers or for delivering • All types of hanging possible (tubes, rails, slides, wolf-teeth, butchers, the Meat Hanging-C body features a wide range of equipment etc.) specially-designed to meet the most demanding operating conditions. • Mixed hanging possible (tube/rail; tube/slide; rail/slide) To optimise operations and inter-abattoir compatibility, CHEREAU has • Unlimited celling distribution and connection equipment developed mixed hanging systems, enabling 2 hanging models to be • Hydraulic quarter handling equipment (LEVIAND) combined in the same body. • Secured, specific access equipment. A structure specially designed for hanging loads has been developed and optimised over the last 50 years on the proven INOGAM body base, guaranteeing maximum isothermal efficiency (FRC). The roof, sidewalls and rear frame are fitted with special inserts that control the high and moving centre of gravity of the loads. Always combined with a CHEREAU semi-trailer chassis, with a retractable front part if necessary, with an extra-wide axle track and ultra-stable suspension, or with an understructure specially calculated for straight trucks, CHEREAU Meat-Hanging-C is 100% EXPERTISE. Meat Hanging-C

Tubular hanging rail

Connectors 140 mm gantry 110 mm gantry Diabolo hook DIN 250 hook stainless steel 40/49 tube + galvanised steel 50/60 tube 40/49 tube 50/60 tube fall safeguarde

Switch 5 tubes/2 outlets 5 converging galvanised steel 50/60 mm tubes 5 converging stainless steel 40/49 mm tubes

Slide hanging rail Wolf-tooth hanging rail

Connectors NORMAN cleat

LEVIAND

Outlet switches FURGOCAR slides with returns

LEVIAND 60 LEVIAND 120 ½ LEVIAND 25 CHEREAU © Photo credit: STAINLESS STEEL STAINLESS STEEL Left Mixed hanging rail 4 outlets 5 outlets 2 outlets

5 tubes / 2 bi-rails 5 switch tubes / 5 tubes / 4 switch 4 bi-rails bi-rails

WWW.CHEREAU.COM • Tél. +33 (0)233 580 600 • Fax. +33 (0)233 584 479 • Mail. [email protected] INNOVATION DRIVES YOU FORWARD*