Bib and Brace features: Specifications • Adjustable brace with flame retardant black plastic clips. • Flame retardant adjustable tabs (15cm in length) at the . Style: Sky blue pocketless , bib & brace, switching • Seams with triple needle topstitching for added durability. with integrated arc visor and arc protective hard . • ATPV 51 cal/cm² embroidery on back left centre panel for garment Fabric composition: 88% Cotton 12% Nylon. suitability identification. Mass: 14oz (Outer), • Right hand side of back panel with Dromex® Arc heat transfer print. 9oz (Lining). • Double needle topstitch piece for added durability. Additional: • Accessories, Dromex® part number, DW-ARCBAG • Flame retardant Velcro adjustable tabs (15cm in length) above leg hem. Arc shoulder carry on storage, accommodates storage of your jacket, bib pants, hood and gloves. Arc protection flame retardant switching hood features: • Integrated with 40 cal visor permits the user to work at live parts or in the ARC FLASH RANGE ATPV 51 Cal/cm² vicinity of live parts without requirements for head protection (falling objects) as the hood is integrated with a hard hat specified for arc flash protection. • Centre back opening with flap allows accommodation of a ventilation system, such as a powdered air purifying device, providing cooling comfort. • ATPV 51 cal/cm²embroidery on bottom left of hood for garment suitability • Arc must be worn with additional and identification. correctly selected Arc PPE to ensure complete • Seams with single needle topstitching for added durability. protection against the hazards of Arc Flash. • Side flaps with flame retardant Velcro closure for of putting on and Refer to table “Arc Flash PPE Categories” for further taking off. compatible PPE. Arc Visor Sizes Available • The 40 cal arc visor consists of two polycarbonate layers offering true vision (please refer to datasheet “ARC ErgoS Range” for detailed product Jacket: S-5XL information) with flame retardant Velcro attachments and a universal Nominal measurements of finished garment (cm) bracket made of natural rubber band that fits around the arc Size (please refer to data-sheet sheet, “Nikki Arc Protective Hard Hat” for detailed designation Chest Back Back Sleeve circumference product information). length width length S 94 70 36 47 These garments are commonly used in the following industries: M 99 71 38 47 • Automotive L 104 72 40 48 • Construction • Mining XL 109 73 42 48 • Petroleum 2XL 114 74 44 49 • Utilities and Power Generators 3XL 119 74.5 46 49 • Data centres 4XL 124 75 48 50 • High volume manufacturing 5XL 129 75.5 50 50 Description • Substations and switchrooms Bib & Brace: S-5XL The Dromex® Arc product range is designed to protect the user from the hazards Dromex® A.P.T™ fabrics are self-extinguishing, heat resistant and resistant of heat and to reduce total burn injury when working in environments exposed to ignition. Dromex® Arc garments are sewn with flame retardant thread. Nominal measurements of finished garment (cm) to electric arc hazards. Size Special Instructions designation Waist Outside leg Inside leg Dromex® Arc garments are manufactured with our exclusive Dromex® A.P.T™ extended length length (Arc Protective Technologies) fabric blend, which has been carefully developed Note: For electric arc exposures, wear the correct number of flame resistant S 80 102 78 by our team along with industry experts and professionals to ensure specialised clothing layers as dictated by an electric arc hazard analyst. M 85 104 79 Arc safety and global standards are met. In potentially explosive environments, proper grounding procedures must be used Our Dromex® A.P.T™ fabric and garments have been tested to NFPA, ASTM, EN, for protection against electrostatic spark ignition. L 90 106 80 SABS and IEC standards. Do not put on or remove garments when in a potentially explosive environment. XL 95 108 81 None of the materials or processes used in the manufacture of these products 2XL 100 110 82 This mandatory attire consists of the following: are known to be harmful to the wearer. 3XL 105 110 82 The manufacturer has examined under the system for ensuring quality of Jacket features: 4XL 110 111 82 production by means of monitoring and inspection. • Flame retardant chunky zip with plastic slider and Velcro strips. 5XL 115 111 82 • Seams are triple needle topstitched for added durability. These Arc flash dust are designed to accommodate the basic safety • Sleeves feature a flame retardant knitted cuff providing a great seal requirements and standards for Personal Protective Equipment. when used with gloves and prevents sleeves from rolling upwards. The information contained herein is intended to assist the wearer in the • Right hand side sleeve with Dromex® Arc heat transfer print. selection of Personal Protective Equipment. • Dromex® Arc heat transfer print and ATPV 51 cal/cm² Embroidery below Actual conditions of use cannot be directly simulated in a test environment print on the left chest of jacket for garment identification. therefore it is the responsibility of the end user and not the manufacturer or supplier to determine the arc flash suitability for the intended use. Arc flash protective boilersuits should be thoroughly inspected before use to EN ensure no damage is present. Compliance & Conformity Marking MAIN LABEL ARC HEAT TRANSFER PRINT

• Complies to marking SANS 724, Personal Protective Equipment and ATPV LOOP FOLD CARE LABEL ORIGIN & YOM LABEL protective clothing against the thermal hazards of an electric arc.

• IEC 61482-1-1 - Live working - Protective clothing against the thermal hazards NFPA2112 ASTMF1959 EN11611:2005

of an electric arc - Open Arc Test Method. It determines the Arc Thermal 55mm 67mm S10783 25mm DW-ARC Protection Value (ATPV level) of the garment. The basic principle is that the 88% COTTON 12% NYLON FLAME RETARDANT MADE IN MADE IN ATPV of the garment must be higher than the Arc Flash energy. SOUTH AFRICA SOUTH AFRICA Warm Do not Tumble Dry • IEC 61482-1-2, Live working - Protective clothing against the thermal hazards Wash Bleach Cool Iron Dry Low Cleanable Y. O. M. 2019 60C P of an electric arc - Box Test Method. It determines the Arc Protection Class 35mm Rating of the material or garment by using a constrained and directed arc: 100mm 45mm • EN 61482-1-2:2014 - LIVE WORKING - PROTECTIVE CLOTHING AGAINST THE Position: ATPV 51 cal/cm2 • Jacket - Neck Position: Position: THERMAL HAZARDS OF AN ELECTRIC ARC - PART 1-2: TEST METHODS This garment is made of Dromex A.P.T TM • Bib & Brace - Back • Jacket - Neck (Inside) • Jacket - Left hand side of chest - METHOD 2: DETERMINATION OF ARC PROTECTION CLASS OF MATERIAL (Arc Protective Technologies) and is a trademark of Dromex. • Bib & Brace - Back (Inside) Manufactured by Dromex • Hood - Back (Inside) • Bib & Brace - Back (Right botton) AND CLOTHING BY USING A CONSTRAINED AND DIRECTED ARC (BOX TEST) P.O. Box 2005, New Germany, 3620 Tel: 031 713 1960 . Fax: 031 705 6508 • Hood - Back (Inside) • Hood - Centre back (IEC 61482-1-2:2014). The purpose of this garment is to protect against the thermal hazards created by an Arc Flash. • NFPA 2112 - Standard on flame resistant clothing for protection of industrial SIZE LABEL ARC HEAT TRANSFER PRINT personnel against short duration thermal exposures from fire. DROMEX ARC BOOKLET • NFPA 70E - Standard for electrical safety clothing for employees. Flammable contaminants will reduce the thermal protection of

• ASTM F1959, Standard Test Method for Determining the Arc Rating of contaminants are present when the garment is worn. Repairs to 30mm

Materials for Clothing. RECOMMENDATIONS 70mm • ASTM F2621-12, Standard Practice for Determining Response Characteristics To maximise protection, garments should be: 20mm and Design Integrity of Arc Rated Finished Products in an Electric Arc 170mm M • Only made of cotton, silk or wool. To maximise comfort: Exposure. 12mm • EN 11611:2015, Protective clothing for use in welding and allied processes. • Wash new garments before wearing to remove fabric Position: • EN 11612:2015 Protective clothing -- Clothing to protect against heat and 50mm 120mm resistant clothing layers as dictated by an electric arc hazard analyst. • Jacket - Neck flame -- Minimum performance requirements. In potentially explosive environments, proper grounding Position: Position: procedures must be used for protection against electrostatic • Bib & Brace - Back • ASTM F2178-12 -Standard Test Method for Determining the Arc Rating and spark ignition. Do not put on or remove garments when in a • Jacket - Right centre sleeve Tag attached inside garment Standard Specification for Eye or Face Protective Products. potentially explosive environment. Garments of Dromex A.P.T TM • Hood - Left hand side at front or commercial or by dry cleaning procedures without Packaging The following suggestions will help keep your garment looking neat, attractive and safe. If home procedures do not remove EMBROIDERY (WHITE THREAD) DROMEX A.P.T. WATERMARK contaminants, commercial laundering or dry cleaning is Jacket: DW-ARC51-J - are packed in a resealable polybag and recommended. Launder garments of Dromex A.P.T TM separate from personal 25mm sold individually. 12mm Bib pants: DW-ARC51-BP - are packed in a resealable polybag and lines. Wash Garments in hot water with a heavy duty detergent. Do sold individually. not overload home laundry equipment. ATPV 51 cal/cm APT Switching hood: DH-ARC51-SH - are packed in a resealable polybag and Do not use chlorine bleach or detergents containing chlorine 120mm 75mm bleach as it may cause fading and reduce fabric strength. sold individually. Tumble dry garments at a low setting. Use the cool down cycle Position: if available. Remove and hang garments as soon as tumble dryer Position: stops. Do not hang in direct sunlight as it can cause fading and • Jacket - Left hand side of chest Cleaning & Maintenance reduce fabric strength. • All over print (Inside fabric) When using commercial laundry aids, be sure to read and • Bib & Brace - Back left side of bottom carefully follow the manufacturer’s instructions. Garments of Dromex® A.P.T™ brand fibre can be cleaned by home or commercial • Hood - Left hand side at front laundry or by dry cleaning procedures without loss of their inherent protective Disposal features. The following suggestions will help keep your garment safe and neat. 60mm All industrial waste should be disposed of correctly according to local Should home procedures not remove contaminants, commercial laundering or Position: regulations and good disposal practice. should be disposed of dry-cleaning is recommended: • Jacket - Side seam (Above hem) considering the hazardous substances they were used for as well as the material they are made up of. • Launder garments of Dromex® A.P.T™ separate from personal non-flame • Bib & Brace - Left side seam below Please consider recycling. resistant clothing to help avoid contamination by flammable materials. adjustable tab • Pre-treat greasy stains and collar/cuff lines. • Hood -Left seam (Inside) • Wash garments in warm water with heavy duty detergent. • Do not overload home laundry equipment. • Do not use chlorine bleach or detergents containing chlorine bleach. • Chlorine bleach may cause fading and reduce fabric strength. • Tumble dry garments at a low setting. • Remove and hang garments as soon as tumbler stops. • Do not hang in direct sun as fading and reduction of fabric strength can occur. • When using commercial laundry aids, be sure to carefully follow the manufacturer’s instructions. Warm Do not use Tumble Dry Wash Bleach Dry Low Cool Iron Cleanable

60C P Arc Flash PPE Categories Hazard/Risk FR (flame retardant) Required Category Recommended minimum Workwear Other PPE clothing used ATPV (Cal/cm²) at this level as per EN

HRC 1 • FR (T-shirt short sleeve worn inside Long sleeve shirt) ARC ARC and FR pants; T-SHIRT BOXER SHORT ARC VISOR 1 or boilersuits; SS&LS ARC LEATHER *(must wear ARC (Single base layer GLOVES with Balaclava) BALACLAVA EARPLUGS of FR protection) 4

HRC 2 • FR under garments (, underwear) • FR shirt and FR pants; DIPPED ARC ANKLE or FR boilersuits; ARC GLOVES ARC HARD HAT SAFETY (2 or more layers ARC SHIRT & ARC ARC ARC 2 PIECE ARC ARC PADDED of FR protection) 8 JEAN DUST X BIB CONTI- BOILERSUIT JACKET

ARC ANKLE ARC HARD HAT EARPLUGS SAFETY BOOTS HRC 3 • FR under garments (undershirt, underwear), FR shirt, FR jacket, FR pants or 3 FR boilersuits; ARC VISOR (2 -3 or more layers *(must wear ARC SUIT ARC LEATHER DIPPED ARC of FR protection) 25 GLOVES ARC GLOVES with Balaclava) BALACLAVA

HRC 4 • FR under garments (Undershirt, underwear), • FR shirt, FR jacket/coat, FR pants or FR boilersuits; (3-4 or more layers ARC BIB & BRACE, JACKET ARC LEATHER EARPLUGS ARC ANKLE of FR protection) 40 AND HOOD WITH VISOR GLOVES SAFETY BOOTS