DOCSLIB.ORG

Hydrocarbon Chromatographic Standards

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hydrocarbon Chromatographic Standards Hydrocarbon Chromatographic Standards ASTM Blends ASTM Blends continued Description Components Description Components D-3710 4.5% n-Butane LPG Reference 64% n-Butane 3.2% n-Butylbenzene Standard – D 6% Butene-1 3.2% n-Decane (Mole%) 25% Isobutane 5.4% 2,4-Dimethylpentane 2% Isopentane 3.2% n-Dodecane 3% Propane 9.7% n-Heptane 5.4% n-Hexane LPG Reference 30% n-Butane 9.7% 2-Methylbutane Standard – E 2% Ethane 5.4% 2-Methylpentane (Mole%) 15% Isobutane 1.5% 2-Methylpropane 2% Isopentane 5.4% n-Octane 45% Propane 2.2% n-Pentadecane 6% Propylene 7.6% n-Pentane 1.5% n-Propane Section L –5 0.5% Butadiene-1,3 4.3% n-Propylbenzene (Mole%) 10% n-Butane 2.2% n-Tetradecane 15% Butene-1 10.8% Toluene 7.5% cis-2-Butene 2.2% n-Tridecane 8% trans-2-Butene 13% p-Xylene 40% Isobutane 17% Isobutylene LPG Reference 1% n-Butane 0.5% Isopentane Standard – A 4% Ethane 0.5% n-Pentane (Mole%) 1% Isobutane 0.5% Propane 1% Isopentane 0.5% Propylene 93% Propane Section L –6 1% Butadiene-1,3 LPG Reference 1% n-Butane (Mole%) 21% Butene-1 Standard – B 4% Ethane 13% n-Butane (Mole%) 3% Isobutane 6% cis-2-Butene 1% Isopentane 7% trans-2-Butene 87% Propane 36.5% Isobutane 4% Propylene 12% Isobutylene 1.5% Isopentane LPG Reference 1% n-Butane 0.5% n-Pentane Standard – C 3% Ethane 1% Propane (Mole%) 3% Isobutane 0.5% Propylene 1% Isopentane 57% Propane 35% Propylene Air Liquide America Specialty Gases LLC www.ALspecialtygases.com 877.715.8651 Hydrocarbon Chromatographic Standards Gas Mixtures Gas Mixtures continued Description Components Description Components GPA Gas Reference 3% n-Butane Mixture G –7 1% Acetylene Standard 1% Carbon Dioxide (Mole%) 1% Argon (Mole%) 9% Ethane 5% Carbon Dioxide 0.5% Helium 12% Carbon Monoxide 3% Isobutane 14% Hydrogen 1% Isopentane 0.5% Methane 70.5% Methane 66.5% Nitrogen 5% Nitrogen 1% n-Pentane Mixture G –8 1% n-Butane 6% Propane (Mole%) 0.3% Carbon Dioxide 3% Ethane Mixture G –6 1% n-Butane 0.2% Helium (Mole%) 0.5% Carbon Dioxide 1% Isobutane 10.5% Ethane 0.3% Isopentane 1% Isobutane 90.5% Methane 71% Methane 1.6% Nitrogen 9% Nitrogen 0.3% n-Pentane 7% Propane 1.8% Propane Air Liquide America Specialty Gases LLC www.ALspecialtygases.com 877.715.8651 Hydrocarbon Chromatographic Standards GPA Natural Gas Liquid Blends GPA Natural Gas Liquid Blends continued Description Components Description Components Blend 1 20% n-Butane Blend 4 10% n-Butane (LV%) 1% Ethane (LV%) 25% Ethane 16% Hexanes and Heavier 8% Hexanes and Heavier 14% Isobutane 10% Isobutane 7% Isopentane 5% Isopentane 11% n-Pentane 2% Methane 31% Propane 5% n-Pentane 35% Propane Blend 2 21% n-Butane (LV%) 2% Ethane Blend 5 6% n-Butane 7% Hexanes and Heavier (Mole%) 0.5% Carbon Dioxide 8% Isobutane 54% Ethane 4% Isopentane 3.9% Hexanes and Heavier 1% Methane 3% Isobutane 4% n-Pentane 1% Isopentane 53% Propane 1.5% Methane 0.1% Nitrogen Blend 3 38% n-Butane 2% n-Pentane (LV%) 19% Hexanes and Heavier 28% Propane 15% Isobutane 12% Isopentane Blend 6 10% n-Butane 13% n-Pentane (Mole%) 1% Carbon Dioxide 3% Propane 25% Ethane 6% Hexanes and Heavier 10% Isobutane 4% Isopentane 4% Methane 1% Nitrogen 4% n-Pentane 35% Propane Air Liquide America Specialty Gases LLC www.ALspecialtygases.com 877.715.8651 Hydrocarbon Chromatographic Standards Hydrocarbon Mixtures Hydrocarbon Mixtures continued Description Components Description Components Mixture 31 45% n-Butane Mixture 39 5% Ethane (Mole%) 16% Isobutane (Mole%) 4% Isobutane 2% Isopentane 75% Propane 37% Propane 16% Propylene Mixture 32 73% n-Butane Mixture 40 8% n-Butane (Mole%) 24% Isobutane (Mole%) 9% Butene-1 3% Propane 3% cis-2-Butene 8% trans-2-Butene Mixture 33 3% n-Butane 4% Ethane (Mole%) 1% 2,2-Dimethylbutane 19% Isobutane 1% 2,3-Dimethylbutane 14% Isobutylene 2% n-Hexane 1% Isopentane 39% Isopentane 1% Pentene-1 2% 2-Methylpentane 16% Propane 2% 3-Methylpentane 17% Propylene 50% n-Pentane Mixture 41 25% n-Butane Mixture 34 22% n-Butane (Mole%) 12% Butene-1 (Mole%) 7% Butene-1 4% cis-2-Butene 62% Isobutane 2% trans-2-Butene 1% Isobutylene 7% Cyclohexane 8% Propane 8% n-Heptane 9% n-Hexane Mixture 35 44% n-Butane 11% Isobutane (Mole%) 20% Butene-1 9% 2-Methylpentane 1% cis-2-Butene 5% n-Pentane 4% trans-2-Butene 2% Pentene-1 20% Isobutane 6% Propane 4% n-Pentane 2% Pentene-1 Mixture 42 26% n-Butane 5% Propane (Mole%) 14% n-Heptane 10% n-Hexane Mixture 36 32% n-Butane 10% Isobutane (Mole%) 14% Butene-1 13% Isopentane 6% cis-2-Butene 8% 3-Methylpentane 9% trans-2-Butene 15% n-Pentane 30% Isobutane 4% Propane 9% Isobutylene Mixture 43 3% n-Butane Mixture 37 18% Butadiene-1,3 (Mole%) 93% Isobutane (Mole%) 14% n-Butane 1% Isopentane 17% Butene-1 1% n-Pentane 19% cis-2-Butene 2% Propane 22% trans-2-Butene 3% Isobutane Mixture 44 94% n-Butane 7% Isobutylene (Mole%) 3% Isobutane 1% Isopentane Mixture 38 31% n-Butane 1% n-Pentane (Mole%) 16% Isobutane 1% Propane 14% Isopentane 27% n-Pentane 12% Propane Air Liquide America Specialty Gases LLC www.ALspecialtygases.com 877.715.8651.
Load more

Recommended publications
  • C9-14 Aliphatic [2-25% Aromatic] Hydrocarbon Solvents Category SIAP
    CoCAM 2, 17-19 April 2012 BIAC/ICCA SIDS INITIAL ASSESSMENT PROFILE Chemical C -C Aliphatic [2-25% aromatic] Hydrocarbon Solvents Category Category 9 14 Substance Name CAS Number Stoddard solvent 8052-41-3 Chemical Names Kerosine, petroleum, hydrodesulfurized 64742-81-0 and CAS Naphtha, petroleum, hydrodesulfurized heavy 64742-82-1 Registry Solvent naphtha, petroleum, medium aliphatic 64742-88-7 Numbers Note: Substances in this category are also commonly known as mineral spirits, white spirits, or Stoddard solvent. CAS Number Chemical Description † 8052-41-3 Includes C8 to C14 branched, linear, and cyclic paraffins and aromatics (6 to 18%), <50ppmV benzene † 64742-81-0 Includes C9 to C14 branched, linear, and cyclic paraffins and aromatics (10 to Structural 25%), <100 ppmV benzene Formula † and CAS 64742-82-1 Includes C8 to C13 branched, linear, and cyclic paraffins and aromatics (15 to 25%), <100 ppmV benzene Registry † Numbers 64742-88-7 Includes C8 to C13 branched, linear, and cyclic paraffins and aromatics (14 to 20%), <50 ppmV benzene Individual category member substances are comprised of aliphatic hydrocarbon molecules whose carbon numbers range between C9 and C14; approximately 80% of the aliphatic constituents for a given substance fall within the C9-C14 carbon range and <100 ppmV benzene. In some instances, the carbon range of a test substance is more precisely defined in the test protocol. In these instances, the specific carbon range (e.g. C8-C10, C9-C10, etc.) will be specified in the SIAP. * It should be noted that other substances defined by the same CAS RNs may have boiling ranges outside the range of 143-254° C and that these substances are not covered by the category.
    [Show full text]
  • Effective Removal of Alkanes and Polycyclic Aromatic Hydrocarbons by Bacteria from Soil Chronically Exposed to Crude Petroleum Oil
    Effective Removal of Alkanes and Polycyclic Aromatic Hydrocarbons by Bacteria from Soil Chronically Exposed to Crude Petroleum Oil Eman Afkar ( [email protected] ) Dept. of Basic Sciences, Preparatory Year Deanship (PYD), King Faisal University, Al-Ahsa, 31982, Saudi Arabia. https://orcid.org/0000-0002-7442-4880 Aly M. Hafez Dept. of Chemistry, College of Science, King Faisal University, Al-Ahsa, 31982, Saudi Arabia. Rashid I.H. Ibrahim Dept. of Biological Sciences, College of Science, King Faisal University, Al-Ahsa, 31982, Saudi Arabia. Dept. of Botany, Faculty of Science, University of Khartoum, PO Box 321, PC 11115, Sudan Munirah Aldayel Dept. of Biological Sciences, College of Science, King Faisal University, Al-Ahsa, 31982, Saudi Arabia. Research Keywords: n-alkanes, GC-MS, crude oil degradation, bacteria, contaminants, hydrocarbons Posted Date: February 16th, 2021 DOI: https://doi.org/10.21203/rs.3.rs-207407/v1 License: This work is licensed under a Creative Commons Attribution 4.0 International License. Read Full License Page 1/18 Abstract In this study, two bacterial strains isolated from an oil-contaminated soil, designated as AramcoS2 and AramcoS4 were able to degrade crude oil, long-chain n-alkanes of C10 to C20; (n-decane, n-undecane, n- dodecane, n-tridecane, n-tetradecane, n-pentadecane, n-hexadecane, n-heptadecane, n-octadecane n- nonadecane, and n-eicosane) and polycyclic aromatic hydrocarbons (PAHs) including biphenyl, naphthalene, and anthracene. Gas chromatography-mass spectrometry (GC-MS) technique was conducted to analyze and identify the crude oil residues after biodegradation. AramcoS2 and AramcoS4 were able to reduce the concentration of long-chain n-alkanes of C10-C20 eciently on average by 77% of the original concentration.
    [Show full text]
  • Use of Solvents for Pahs Extraction and Enhancement of the Pahs Bioremediation in Coal- Tar-Contaminated Soils Pak-Hing Lee Iowa State University
    Iowa State University Capstones, Theses and Retrospective Theses and Dissertations Dissertations 2000 Use of solvents for PAHs extraction and enhancement of the PAHs bioremediation in coal- tar-contaminated soils Pak-Hing Lee Iowa State University Follow this and additional works at: https://lib.dr.iastate.edu/rtd Part of the Environmental Engineering Commons Recommended Citation Lee, Pak-Hing, "Use of solvents for PAHs extraction and enhancement of the PAHs bioremediation in coal-tar-contaminated soils " (2000). Retrospective Theses and Dissertations. 13912. https://lib.dr.iastate.edu/rtd/13912 This Dissertation is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Retrospective Theses and Dissertations by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. INFORMATION TO USERS This manuscript has been reproduced from the microfilm master. UMI films the text directly from the original or copy submitted. Thus, some thesis and dissertation copies are in typewriter fece, while others may be from any type of computer printer. The quality of this reproduction is dependent upon the quaiity of the copy submitted. Broken or indistinct print colored or poor quality illustrations and photographs, print bleedthrough, substeindard margins, and improper alignment can adversely affect reproduction. In the unlilcely event that the author did not send UMI a complete manuscript and there are missing pages, these will be noted. Also, if unauthorized copyright material had to be removed, a note will indicate the deletion.
    [Show full text]
  • A Confinement Strategy to Prepare N-Doped Reduced Graphene Oxide
    Electronic Supplementary Material (ESI) for Nanoscale. This journal is © The Royal Society of Chemistry 2019 Supporting Information A confinement strategy to prepare N-doped reduced graphene oxide foams with desired monolithic structures for supercapacitors Daoqing Liu,a,b,# Qianwei Li, *c,# Si Li, a,b Jinbao Hou,d Huazhang Zhao *a,b a Department of Environmental Engineering, Peking University, Beijing 100871, China b The Key Laboratory of Water and Sediment Sciences, Ministry of Education, Beijing 100871, China c State Key Laboratory of Heavy Oil Processing, Beijing Key Laboratory of Oil and Gas Pollution Control, China University of Petroleum, 18 Fuxue Road, Changping District, Beijing 102249, China d College of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China # Co-first author. * Corresponding author. Tel/fax: +86-10-62758748; email address: [email protected] (H.Z. Zhao). S1 Experimental Methods 1. Preparation of graphite oxide (GO) Graphite oxide was prepared from natural graphite (Jinglong Co., Beijing, China) according to 1 a modified Hummers method : 120 mL 98 wt% H2SO4 was poured into a beaker containing a mixture of 5 g natural graphite and 2.5 g NaNO3, and then the mixture was stirred in an ice bath for 30 min. 15 g KMnO4 was added slowly into the mixture, which was allowed to react for 2 h at a temperature no more than 20°C. Then, the temperature was risen to 35°C, and the reaction was performed for another 2 h. After that, the reactant mixture was poured slowly into 360 mL distilled water under violent stirring condition so as to control the temperature no more than 90°C, followed by further reaction at 75°C for 1 h.
    [Show full text]
  • Sections-A, B and C
    Science IX Sample Paper 7 Solved www.rava.org.in CLASS IX (2019-20) SCIENCE (CODE 086) SAMPLE PAPER-7 Time : 3 Hours Maximum Marks : 80 General Instructions : (i) The question paper comprises of three sections-A, B and C. Attempt all the sections. (ii) All questions are compulsory. (iii) Internal choice is given in each sections. (iv) All questions in Section A are one-mark questions comprising MCQ, VSA type and assertion-reason type questions. They are to be answered in one word or in one sentence. (v) All questions in Section B are three-mark, short-answer type questions. These are to be answered in about 50-60 words each. (vi) All questions in Section C are five-mark, long-answer type questions. These are to be answered in about 80-90 words each. (vii) This question paper consists of a total of 30 questions. 6. Who proposed the fluid mosaic model of protoplasm? [1] Section - A (a) Singer and Nicolson (b) Watson and Crick (c) Robert Hook (d) Robert Brown 1. Which of the following actions a force can do? [1] (a) Can move a stationary object. Ans : (a) Singer and Nicolson. (b) Can stop a moving object. or (c) Can change the speed of a moving object. Which of the following are complex tissues? (d) All of the above. (a) Xylem and Phloem Ans : (d) All of the above (b) Collenchyma and Sclerenchyma (c) Parenchyma and Collenchyma 2. Ozone layer protects us from which one of the (d) Xylem and Parenchyma following? [1] (a) X- rays.
    [Show full text]
  • Methane Hydrocarbon Compounds During Wintertime in Beijing
    Atmos. Chem. Phys. Discuss., doi:10.5194/acp-2016-783, 2016 Manuscript under review for journal Atmos. Chem. Phys. Published: 16 December 2016 c Author(s) 2016. CC-BY 3.0 License. The levels, variation characteristics and sources of atmospheric non- methane hydrocarbon compounds during wintertime in Beijing, China Chengtang Liu1,3, Yujing Mu1,2 *, Junfeng Liu1,3, Chenglong Zhang1,3, Yuanyuan Zhang1,3, Pengfei 5 Liu1,3, Hongxing Zhang1,4 1Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, China 2Center for Excellence in Regional Atmospheric Environment, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021, China 3University of Chinese Academy of Sciences, Beijing 100085, China 10 4Beijing Urban Ecosystem Research Station, Beijing, 100085, China Correspondence to: Yujing Mu ([email protected]) Abstract. Atmospheric non-methane hydrocarbon compounds (NMHCs) were measured at a sampling site in Beijing city from 15 December 2015 to 14 January 2016 to recognize their pollution levels, variation characteristics and sources. Fifty- 15 three NMHCs were quantified and the proportions of alkanes, alkenes, acetylene and aromatics to the total NMHCs were 49.8% ~ 55.8%, 21.5% ~ 24.7%, 13.5% ~ 15.9% and 9.3% ~ 10.7%, respectively. The variation trends of the NMHCs concentrations were basically identical and exhibited remarkable fluctuation, which were mainly ascribed to the variation of meteorological conditions, especially wind speed. The diurnal variations of NMHCs in clear days exhibited two peaks during the morning and evening rush hours, whereas the rush hours’ peaks diminished or even disappeared in the haze days, 20 implying that the relative contribution of the vehicular emission to atmospheric NMHCs depended on the pollution status.
    [Show full text]
  • Butenes Separation, Supp. A
    PROCESS ECONOMICS PROGRAM SRI INTERNATIONAL Menlo Park, California 94025 Abstract Process Economics Program Report No. 71A BUTTLENES (October 1982) Demand is fast increasing for lsobutylene, especially that used in manufacturing methyl tertiary-butyl ether, and for high purity butene-1 to use as a copolymer in linear low density polyethylene. Because of their wide availability, mixed butane-butylene streams from oleflns plants and petroleum refineries are being increasingly fed to plants to separate butylenes for use in chemicals. This first supplement to Report No. 71 updates demand projections, production capacities, and separation techniques for high purity butene-1 and lsobutylene. The processes that are now available for separating and purifying both butene-1 and lsobutylene from mixed butyl- ene streams are evaluated and compared. Other procedures for obtaining butylenes, such as dehydrogenatlon, lsomerleatlon, and disproportion&ion, are not updated in this report. PEP’81 JLC Report No. 71A - BUTYLENES SUPPLEMENT A by JOHN L. CHADWICK I I October 1982 f-F0 0 A private report by the m PROCESS ECONOMICS PROGRAM 0 Menlo Park, California 94025 0 For detailed marketing data and information, the reader is referred to one of the SRI programs specializing in marketing research. The CHEMICALECONOMICS HANDBOOK Program covers most major chemicals and chemical products produced in the United States and the WORLDPETROCHEMICALS Program covers major hkdrocarbons and their derivatives on a worldwide basis. In addition, the SRI DIRECTORYOF CHEMICALPRODUCERS services provide detailed lists of chemical producers by company, prod- uct, and plant for the United States and Western Europe. ii CONTENTS 1 INTRODUCTION . 1 2 SUMMARY .
    [Show full text]
  • Determination of Parent and Alkylated Polycyclic Aromatic Hydrocarbons (Pahs) in Biota and Sediment
    ICES TECHNIQUES IN MARINE ENVIRONMENTAL SCIENCES NO. 45 NOVEMBER 2009 Determination of parent and alkylated polycyclic aromatic hydrocarbons (PAHs) in biota and sediment L. WEBSTER • J. TRONCZYNSKI P. KORYTAR • K. BOOIJ • R. LAW International Council for the Exploration of the Sea Conseil International pour l’Exploration de la Mer H. C. Andersens Boulevard 44 – 46 DK‐1553 Copenhagen V Denmark Telephone (+45) 33 38 67 00 Telefax (+45) 33 93 42 15 www.ices.dk [email protected] Our cover photo was taken by N. Penny Holliday aboard the RRS “Discovery” in rough seas in the Rockall Trough. Recommended format for purposes of citation: Webster, L., Tronczynski, J., Korytar, P., Booij, K., and Law, R. 2010. Determination of parent and alkylated polycyclic aromatic hydrocarbons (PAHs) in biota and sediment. ICES Techniques in Marine Environmental Sciences. No. 45. 26 pp. Series Editor: Paul D. Keizer For permission to reproduce material from this publication, please apply directly to the General Secretary. Correspondence concerning the details of any method or procedure should be directed to the author(s). This series presents detailed descriptions of methods and procedures relating to chemical and biological measurements in the marine environment. Most techniques described have been selected for documentation based on performance in ICES or other intercalibration or intercomparison exercises: they have been carefully evaluated and shown to yield good results when correctly applied. They have also been subject to review by relevant ICES working groups, but this is not to be construed as constituting official recommendation by the Council. ISBN 978-87-7482-074-1 978-87-7482-297-4 https://doi.org/10.17895/ices.pub.5070 ISSN 0903 – 2606 2707-6997 © 2010 International Council for the Exploration of the Sea ICES Techniques in Marine Environmental Sciences No.
    [Show full text]
  • Isopentane Ipt
    ISOPENTANE IPT CAUTIONARY RESPONSE INFORMATION 4. FIRE HAZARDS 7. SHIPPING INFORMATION 4.1 Flash Point: -70°F C.C. 7.1 Grades of Purity: Research: 99.99%; pure: Common Synonyms Watery liquid Colorless Gasoline-like odor (approx.) 99.4%; technical: 97% 2-Methylbutane 4.2 Flammable Limits in Air: 1.4%-8.3% 7.2 Storage Temperature: Ambient Floats on water. Flammable, irritating vapor is produced. Boiling point 4.3 Fire Extinguishing Agents: Dry 7.3 Inert Atmosphere: No requirement chemical, foam, or carbon dioxide is 82°F. 7.4 Venting: Open (flame arrester) or pressure- 4.4 Fire Extinguishing Agents Not to Be vacuum Evacuate. Used: Water may be ineffective 7.5 IMO Pollution Category: C Keep people away. 4.5 Special Hazards of Combustion Wear goggles and self-contained breathing apparatus. Products: Not pertinent 7.6 Ship Type: 3 Shut off ignition sources and call fire department. 4.6 Behavior in Fire: Highly volatile liquid. 7.7 Barge Hull Type: Currently not available Avoid contact with liquid and vapor. Vapors may explode when mixed with air. Stay upwind and use water spray to ``knock down'' vapor. Notify local health and pollution control agencies. 4.7 Auto Ignition Temperature: 800°F 8. HAZARD CLASSIFICATIONS 4.8 Electrical Hazards: Not pertinent 8.1 49 CFR Category: Flammable liquid FLAMMABLE. Fire 4.9 Burning Rate: 7.4 mm/min. 8.2 49 CFR Class: 3 Flashback along vapor trail may occur. 4.10 Adiabatic Flame Temperature: Currently 8.3 49 CFR Package Group: I Vapor may explode if ignited in an enclosed area.
    [Show full text]
  • Kinetic Modeling for PAH Formation in a Counterflow Diffusion Flame of Isobutane
    27th ICDERS July 28th – August 2nd, 2019 Beijing, China Kinetic modeling for PAH formation in a counterflow diffusion flame of isobutane Wei-Kai Chiua, Hairong Taob, Kuang C. Linc,* aDepartment of Mechanical and Electro-Mechanical Engineering,Kaohsiung 80424, National Sun Yat-Sen University, Taiwan bCollege of Chemistry, Beijing Normal University, Beijing 100875, China cEngineering and System Science,Hsinchu 30013, National Tsing Hua University, Taiwan 1 Abstract In the purpose of understanding the complex chemistry of aromatic hydrocarbon formation in diffusion flames of isobutane oxidation, mechanism that consists of 300 species and 11790 reactions is employed for verifying experimental measurements. The kinetic mechanism is incorporated into a 1-D axisymmetric laminar finite-rate model of a counterflow flame to compute the species profiles. Furthermore, the reaction pathway diagram produced by rate of production analysis illustrates the correlation between the decomposition of isobutane and formation of the target species. Keywords: isobutane, counterflow diffusion flame, paromatic hydrocarbon, chemical kinetic modeling 2 Introduction Isobutane (iC4H10) is an isomer of butane and flammable gas. Although it is not ideal fuel on its own, this species plays a role in the oxidation of large hydrocarbon fuels and is used in liquified natural gas (LNG) [1]. The detailed kinetic mechanism of isobutane combustion contains dozens of species and hundreds of reactions. When a kinetic mechanism is applied to a reaction source term of species transport equations, the computational solutions can be used to describe reactive flows and species distribution in multidimensional reactors. This kind of numerical modeling permits designers and analysts to evaluate emissions and performance of fuels in reactors or combustors.
    [Show full text]
  • Supporting Information of Polycyclic Aromatic Hydrocarbons (Pahs) In
    Supporting Information of Polycyclic aromatic hydrocarbons (PAHs) in aerosols over the central Himalayas along two south-north transects Peng Fei Chen1,5, Chao Liu Li1, Shi Chang Kang2,3*, Maheswar Rupakheti4, Arnico K Panday6, Fang Ping Yan2,5, Quan Lian Li2, Qiang Gong Zhang1,3, Jun Ming Guo1,5, Dipesh Rupakheti1,5, Wei Luo7 1Key Laboratory of Tibetan Environment Changes and Land Surface Processes, Institute of Tibetan Plateau Research, Chinese Academy of Sciences, Beijing 100101, China 2State Key Laboratory of Cryospheric Science, Cold and Arid Regions Environmental and Engineering Research Institute, Lanzhou 730000, China 3Center for Excellence in Tibetan Plateau Earth Sciences, Chinese Academy of Sciences, Beijing 100085, China; 4Institute for Advanced Sustainability Studies, Potsdam 14467, Germany 5University of Chinese Academy of Sciences, Beijing 100039, China 6International Centre for Integrated Mountain Development, Kathmandu, Nepal 7State Key Lab of Urban and Regional Ecology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, China Correspondence to: S. Kang ([email protected]) Text SI-1 Sample extraction and analysis Text SI-2 Quality control Table SI-1 Percentage contribution (%) of each species to total PAHs in the atmosphere over the Himalayas. Text SI-1 Sample extraction and analysis A quarter of each filter was cut into pieces, placed into a glass tube, and immersed in 20 mL of dichloromethane (DCM) and n-hexane (1:1). The extraction was performed by sonication twice for 30 min at 27 °C. Every single sample was spiked with deuterated PAHs (naphthalene-d8, acenaphthene-d10, phenanthrene-d10, chrysene-d12, and perylene-d12) as recovery surrogates.
    [Show full text]
  • Oxidation of Ethane to Ethylene and Acetic Acid by Movnbo Catalysts Martial Roussel, Michel Bouchard, Elisabeth Bordes-Richard, Khalid Karim, Saleh Al-Sayari
    Oxidation of ethane to ethylene and acetic acid by MoVNbO catalysts Martial Roussel, Michel Bouchard, Elisabeth Bordes-Richard, Khalid Karim, Saleh Al-Sayari To cite this version: Martial Roussel, Michel Bouchard, Elisabeth Bordes-Richard, Khalid Karim, Saleh Al-Sayari. Oxida- tion of ethane to ethylene and acetic acid by MoVNbO catalysts. Catalysis Today, Elsevier, 2005, 99, pp.77-87. 10.1016/j.cattod.2004.09.026. hal-00103604 HAL Id: hal-00103604 https://hal.archives-ouvertes.fr/hal-00103604 Submitted on 4 Oct 2006 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Oxidation of ethane to ethylene and acetic acid by MoVNbO catalysts M. Roussel 1, M. Bouchard 1, E. Bordes-Richard 1*, K. Karim 2, S. Al-Sayari 2 1: Laboratoire de Catalyse de Lille, UMR CNRS 8010, USTL-ENSCL, 59655 Villeneuve d'Ascq Cedex, France 2: SABIC R&T, P.O. Box 42503, Riyadh, Saoudi Arabia ABSTRACT The influence of niobium on the physicochemical properties of the Mo-V-O system and on its catalytic properties in the oxidation of ethane to ethylene and acetic acid is examined. Solids based on MoV 0.4 Ox and MoV 0.4 Nb 0.12 Oy composition and calcined at 350 or 400°C were studied by X-ray diffraction, and by laser Raman and X-ray photoelectron spectroscopies.
    [Show full text]