Twin Air Catalogue
Total Page:16
File Type:pdf, Size:1020Kb
www.a1accessory.com.au Follow the Leader. MXGP World Champion Jeffrey Herlings RED BULL FACTORY KTM RACING WWW.TWINAIR.COM.AU THE CHOICE OF CHAMPIONS In some respects, motocross was born in the Netherlands. It was here, in 1947, that the Dutch national motorcycle federation hosted an international “scramble” for teams from Great Britain, Belgium and the Netherlands, and called it a “moto-cross.” While the sport’s popularity grew steadily over the next 25 years, one thing that remained constant was the frustration of off-road biking in the Netherlands. The lowland dunes and fields offered the perfect terrain for riding, but the stock paper air filters of the day were no match for the sandy, gritty soil. There was a paper filter with a single layer of foam, but even that didn’t cut it for protection; after 30 minutes it was shot. In 1972, the motocross world was given a historic boost by a revolutionary product: a laminated, dual-foam air filter that, when soaked in a special oil, allowed free airflow into the carburetor while keeping dirt, grime, sand and water out of it. It was effective, durable, washable and reusable. It took off, and the little start-up company that invented it, called Twin Air, hasn’t stopped ever since. Evolving continually with motorcycle design and technology, Twin Air filters and accessories have stayed ahead of the competition for half a century. Today they are available for all Motocross and ATV vehicles, and distributed worldwide. Twin Air filters are OEM-specified for 20+ motorcycle companies. Including KTM, Husqvarna, Gas Gas, Sherco, Beta + more! THE OUTSIDE BECAUSE THE INSIDE CAN LOOK LIKE THIS. LOOKS LIKE THIS. Take a close look at the two layer foam design. The coarse outer shell catches airborne dirt, grime and sand. The fine inner layer traps the little stuff. Layers heat laminated (NOT GLUED) to allow airflow between the two foam densities. THE CHOICE OF CHAMPIONS Since 1972 Twin Air supported over 300 World Champions. Twin Air is proud to show the Twin Air supported Champions of 2019! G R E G A L B E R T Y N J E F F R E Y H E R L I N G S B L A K E B A G G E T T S T E V E L A M S O N J U S T I N B A R C I A G R A N T L A N G S T O N J E A N - M I C H E L B A Y L E J E R E M Y M C G R A T H C H R I S B O R I C H T R A V I S P A S T R A N A M I K E B R O W N M I C K A E L P I C H O N T R E Y C A N A R D C H A D R E E D R I C K Y C A R M I C H A E L K E N R O C Z E N R O G E R D E C O S T E R J E F F S T A N T O N J O H N D O W D E L I T O M A C R Y A N D U N G E Y R Y A N V I L L O P O T O S T E F A N E V E R T S D E A N W I L S O N E R N E S T O F O N S E C A K E V I N W I N D H A M PAST CHAMPIONS PAST AIR FILTER OPTIONS Original Dual-Stage Air Filter | OEM Replacement This is where it all began. Twin Air standard OEM replacement filters are constructed of two layers of open-pore polyester foam that are bonded together to provide maximum filtration and superior airflow. The total foam thickness is 15mm. The fused dual layers of open-pore outer foam and fine inner foam trap even the smallest particles. The new, rounder design boosts airflow. So do the minimised seams, made possible by a revolutionary micro-gluing process: Shorter seams = more foam = more flow • Dual-Stage Foam • 15mm Thick • 60/45 Pores/Inch • DUAL-LAYER FOAM DESIGN • ASSEMBLED BY HAND AND • WASHABLE / REUSABLE INSPECTED FOR A PERFECT FIT PART #: DESCRIPTION: FITMENT: RRP: TA154116 Dual-Stage Air Filter KTM/HUSQ 250/350/450 SXF/EXCF/TE/TC/FE/FC 2016-20 $32.95 Factory Pre-Oiled (X) • Pre-Oiled Dual-Stage Foam • 15mm Thick • 60/45 Pores/Inch The Original Dual-Stage Air Filter is completely submerged in BIO Liquid Power Filter Oil. The filter is then massaged to ensure all pores are evenly coated with oil, it’s then placed in a temperature controlled room to allow the oil to completely cure. You just open the resealable bag and install! • PRE-OILED WITH BIO LIQUID POWER • WASHABLE / REUSABLE • ADD “X” TO STANDARD PART # PART #: DESCRIPTION: FITMENT: RRP: TA154116 X Pre-Oiled Air Filter KTM/HUSQ 250/350/450 SXF/EXCF/TE/TC/FE/FC 2016-20 $35.95 AIR FILTER OPTIONS Extreme / Dust / Sand Air Filters (BR) • 33% Increased Protection • Dual-Stage Foam • 20mm Thick • 60/45 Pores/Inch Twin Air Extreme / Dust / Sand filters have 33% increased protection over standard filters. Both protective layers are 33% thicker than the original dual-stage filter. Offering superior protection the foam (60/45 Pores) is bonded together to provide maximum filtration and superior airflow. Part #: TA154116 BR Fitment: KTM/HUSQ 250/350/450 SXF/EXCF/TE/TC/FE/FC 2016-20 RRP: $35.95 Dust Covers (DC) • Single-Stage Foam • 10mm Thick • 30 Pores/Inch The Dustcover (DC) is a single white layer (10mm) open pore foam. Fit over the air filter when riding in severe conditions such as heavy dust and sand. Part #: TA154116 DC Fitment: KTM/HUSQ 250/350/450 SXF/EXCF/TE/TC/FE/FC 2016-20 RRP: $21.95 Filter Skins • Single-Stage Nylon Layer • Captures 90% of Dirt & Dust The skin acts as an extra layer of protection, for when you are riding in sandy or dusty conditions. The skin is an orange single stage nylon (polyamide) layer that captures 90% of dirt and dust. Part #: TA160000GPBK1 Fitment: KTM/HUSQ 250/350/450 SXF/EXCF/TE/TC/FE/FC 2016-20 RRP: $39.95 Powerflow Replacement Air Filters / Fire Resistant (FR) POWERFLOW • Triple-Stage Foam 4-STROKE • 15mm Thick REPLACEMENT • 30/60/45 Pores/Inch FIRE RESISTANT Power Flow Replacement 4 Stroke Fire Resistant (FR) replacement filters are three layers of open-pore polyester foam (30/60/45 Pores) that are bonded together to provide maximum filtration and superior airflow. The total foam thickness is 15mm. Features free-flowing, backfire-resistant foam laminated to the inside of the filter– eliminates restrictive, stock backfire screen for four-stroke engines. Part #: TA154218 FR Fitment: KTM/HUSQ 250/350/450 SXF/EXCF/TE/TC/FE/FC 2016-18 RRP: $35.95 ADVENTURE UPGRADE KITS UPGRADE ADV SUPER EASY INSTALLATION! AIR FILTER KITS • Triple-Stage Foam • 15mm Thick • 30/60/45 Pores/Inch Twin Air has a range of Adventure Upgrade Air Filter Kits available. The Twin Air Adventure Upgrade Kits use Triple-Stage Foam Air Filters and have a Filter Frame replacing the OEM paper filter. The foam Air Filter (30/60/45 Pores) is 15mm thick and gives your bike better protection and performance. Adventure Upgrade Kits include a Pre-Oiled Triple-Stage Foam Air Filter (FRX) and filter frame that are easy to install. The foam air filter part can be replaced separately without buying another complete kit. HONDA AFRICA TWIN Part #: TA150607P Frame & Filter RRP: $144.95 Part #: TA150607FR Replacement Filter RRP: $35.95 KTM ADV 1050/1090/1190/1290 Part #: TA154523P Frame & Filter RRP: $89.95 Part #: TA154523FR Replacement Filter RRP: $19.95 KTM ADV/R 790 Part #: TA154524P Frame & Filter RRP: $89.95 Part #: TA154524FR Replacement Filter RRP: $19.95 HUSKY 701 & KTM 690 Part #: TA155510P Frame & Filter RRP: $69.95 Part #: TA155510FR Replacement Filter RRP: $24.95 RIDING CONDITIONS USAGE GUIDE Normal Loamy Riding Conditions We advise using the Original Dual-Stage Twin Air filter, pre-oiled with Liquid Bio Power Filter Oil. If you are using the 2-stroke cage (without backfire screen) on a 4-stroke bike, we advise using our Fire Resistant (FR) filter oiled with Liquid Bio Power Filter Oil. LOAMY CONDITIONS LOAMY Dusty Riding Conditions Use a DRY Twin Air Filter Skin as a pre-filter on top of an OILED Original Dual-Stage Filter. Twin Air Filter Skins are always a dry application. Very Dusty Riding Conditions We advise you add a lightly OILED Dust Cover (DC) on top of an OILED Original Dual-Stage Filter. Heavy Sand & Dusty Riding Conditions In heavy dust and sandy riding conditions, we advise to use a single OILED Extreme/Dust/Sand Filter (BR). Extreme Dust / Extreme Sand / Extreme Mud Riding Conditions Filter Dust Cover Filter Skin In extremely dusty and sandy riding conditions we advise to use: BR OILED TwinAir Filter + On top of this use a lightly pre-oiled Dust Cover. + On top of the Dust Cover, use a dry Air Filter Skin. EXTREME CONDITIONS AIRBOX COVERS Airbox Cover & Airbox Wedge Prevent water and cleansers from entering your intake when you clean your airbox! COVER Airbox Covers are manufactured from tough, durable ABS plastic.