पेटेंट कार्ाालर् Official Journal of the Patent Office

पेटᴂट कार्ाालर् शासकीर् जर्ाल

OFFICIAL JOURNAL OF THE PATENT OFFICE

नर्र्ामर् सं. 29/2020 शुक्रवार दिर्ांक: 17/07/2020 ISSUE NO. 29/2020 FRIDAY DATE: 17/07/2020

पेटᴂट कार्ाालर् का एक प्रकाशर् PUBLICATION OF THE PATENT OFFICE

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26838

INTRODUCTION

In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005 effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched.

( Om Prakash Gupta ) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

17TH JULY, 2020

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26839

CONTENTS

SUBJECT PAGE NUMBER

JURISDICTION : 26841 – 26842

SPECIAL NOTICE : 26843 – 26844

EARLY PUBLICATION (DELHI) : 26845 – 26852

EARLY PUBLICATION (MUMBAI) : 26853 – 26924

EARLY PUBLICATION (CHENNAI) : 26925 – 26992

EARLY PUBLICATION ( KOLKATA) : 26993 – 27017

PUBLICATION AFTER 18 MONTHS (DELHI) : 27018 – 27081

PUBLICATION AFTER 18 MONTHS (MUMBAI) : 27082 – 27184

PUBLICATION AFTER 18 MONTHS (CHENNAI) : 27185 – 27413

PUBLICATION AFTER 18 MONTHS (KOLKATA) : 27414 – 27435

WEEKLY ISSUED FER (DELHI) : 27436 – 27487

WEEKLY ISSUED FER (MUMBAI) : 27488 – 27511

WEEKLY ISSUED FER (CHENNAI) : 27512 – 27558

WEEKLY ISSUED FER (KOLKATA) : 27559 – 27569 APPLICATION(S) FOR RESTORATION OF LAPSED PATENT(S) : 27570 [PUBLICATION U/S 61(1) RULE 84(3)](DELHI) PUBLICATION U/R 84(3) IN RESPECT OF APPLICATION : 27571 FOR RESTORATION OF PATENTS(MUMBAI) PUBLICATION U/R 84(3) IN RESPECT OF APPLICATION : 27572 FOR RESTORATION OF PATENT(CHENNAI) PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE : 27573 – 27602 GRANT (DELHI) PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE : 27603 – 27612 GRANT (MUMBAI) PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE : 27613 – 27637 GRANT (CHENNAI PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE : 27638 – 27650 GRANT (KOLKATA) INTRODUCTION TO DESIGN PUBLICATION : 27651 CANCELLATION PROCEEDINGS UNDER SECTION 19 OF THE DESIGNS ACT, 2000 & UNDER RULE 29(1) OF DESIGNS : 27652 (AMENDMENT) RULES, 2008

REGISTRATION OF DESIGNS : 27653 - 27721

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26840

THE PATENT OFFICE KOLKATA, 17/07/2020 Address of the Patent Offices/Jurisdictions The following are addresses of all the Patent Offices located at different places having their Territorial Jurisdiction on a Zonal basis as shown below:- 1 Office of the Controller General of Patents, 4 The Patent Office, Designs & Trade Marks, Government of India, Boudhik Sampada Bhavan, Intellectual Property Rights Building, Near Antop Hill Post Office,S.M.Road,Antop Hill, G.S.T. Road, Guindy, Mumbai – 400 037 Chennai – 600 032.

Phone: (91)(22) 24123311, Phone: (91)(44) 2250 2081-84 Fax : (91)(22) 24123322 Fax : (91)(44) 2250 2066 E-mail: [email protected] E-mail: [email protected]  The States of Andhra Pradesh, Telangana, Karnataka, Kerala, Tamil Nadu and the Union Territories of Puducherry and Lakshadweep.

2 The Patent Office, Government of India, 5 The Patent Office (Head Office), Boudhik Sampada Bhavan, Government of India, Near Antop Hill Post Office,S.M.Road,Antop Hill, Boudhik Sampada Bhavan, Mumbai – 400 037 CP-2, Sector –V, Salt Lake City, Phone: (91)(22) 24137701 Kolkata- 700 091 Fax: (91)(22) 24130387 E-mail: [email protected] Phone: (91)(33) 2367 1943/44/45/46/87  The States of Gujarat, Maharashtra, Madhya Fax: (91)(33) 2367 1988 Pradesh, Goa and Chhattisgarh and the Union E-Mail: [email protected] Territories of Daman and Diu & Dadra and Nagar Haveli  Rest of India 3 The Patent Office, Government of India, Boudhik Sampada Bhavan, Plot No. 32., Sector-14, Dwarka, New Delhi – 110075 Phone: (91)(11) 25300200 & 28032253 Fax: (91)(11) 28034301 & 28034302 E.mail: [email protected]  The States of Haryana, Himachal Pradesh, Jammu and Kashmir, Punjab, Rajasthan, Uttar Pradesh, Uttaranchal, Delhi and the Union Territory of Chandigarh. Website: www.ipindia.nic.in www.patentoffice.nic.in All applications, notices, statements or other documents or any fees required by the Patents Act, 1970 and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received only at the appropriate offices of the Patent Office. Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of Patents drawn on a scheduled Bank at the place where the appropriate office is situated.

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26841

पेटᴂट कार्ाालर् कोलकाता, दिर्ांक 17/07/2020 •कार्ाालर्ⴂ के क्षेत्रानिकार के पते नवनिन्न जर्हⴂ पर नथित पेटᴂट कार्ाालर् के पते आंचनलक आिार पर ि셍शात उर्के प्रािेनशक अनिकार क्षेत्र के साि र्ीचे दिए र्ए है:- 1 कार्ाालर् : महानर्र्ंत्रक, एकथव, अनिक쥍प 4 पेटᴂट कार्ाालर्, िारत सरकार तिा व्यापार नचहर्, इंटेले啍चुअल प्रॉपटी राइ絍स नबल쥍डंर्, इंडनथिर्ल इथटेट एंटोप नहल डाकघर के समीप, एसआईडीसीओ आरएमडी र्ोडाउर् एररर्ा एस. एम. रोड, एंटोप नहल, मु륍बई- 400 037, िारत, एडजसेन्ट टु ईर्ल फ्लाथक, जी. एस. टी. रोड, फोर्: (91) (22) 24123311 र्ार्न्डी फ़ै啍स: (91) (22) 24123322 चेन्नई - 600 032. ई. मेल: [email protected] फोर्: (91)(44) 2250 2081-84 फ़ै啍स: (91)(44) 2250-2066 ई. मेल: [email protected]  आन्र प्रिेश, तेलंर्ार्ा, कर्ााटक, केरल, तनमलर्ाडु तिा पुडुचेरी रा煍र् क्षेत्र एवं संघ शानसत क्षेत्र, लक्षिीप 2 पेटᴂट कार्ाालर्, िारत सरकार 5 पेटᴂट कार्ाालर्, िारत सरकार बौनिक संपिा िवर्, कोलकाता, (प्रिार् कार्ाालर्) एंटोप नहल डाकघर के समीप, बौनिक संपिा िवर्, एस. एम. रोड, एंटोप नहल, मु륍बई- 400 037, सीपी-2, से啍टर- V, सा쥍ट लेक नसटी, फोर्: (91) (22) 24137701 कोलकाता-700 091, िारत. फ़ै啍स: (91) (22) 24130387 फोर्: (91)(33) 2367 1943/44/45/46/87 ई. मेल: [email protected] फ़ै啍स:/Fax: (91)(33) 2367 1988

 •र्ुजरात, महाराष्ट्र, मध्र् प्रिेश, र्ोवा तिा छत्तीसर्ढ़ रा煍र् क्षेत्र एवं संघ शानसत ई. मेल: [email protected] क्षेत्र, िमर् तिा िीव, िािर और र्र्र हवेली.  िारत का अवशेष क्षेत्र

3 पेटᴂट कार्ाालर्, िारत सरकार बौनिक संपिा िवर्, प्लॉट सं. 32, से啍टर- 14, द्वारका, र्ई दि쥍ली- 110 075. फोर्: (91)(11) 25300200, 28032253 फ़ै啍स: (91)(11) 28034301, 28034302 ई. मेल: [email protected] हररर्ाणा, नहमाचल प्रिेश, ज륍मू तिा क�मीर, पंजाब,राजथिार्, उत्तर प्रिेश, दि쥍ली तिा उत्तरांचल रा煍र् क्षेत्रⴂ, एवं संघ शानसत क्षेत्र चंडीर्ढ़ वेबसाइट: http://www.ipindia.nic.in www.patentoffice.nic.in पेटᴂट अनिनर्र्म, 1970 तिा पेटᴂट (संशोिर्) अनिनर्र्म, 2005 अिवा पेटᴂट (संशोिर्) नर्र्म, 2006 द्वारा वांनछत सिी आवेिर्, सूचर्ाए, नववरण र्ा अन्र् िथतावेज़ र्ा कोई शु쥍क पेटᴂट कार्ाालर् के केवल उपर्ुक्त कार्ाालर् मᴂ थवीकृत हⴂर्े। शु쥍क: शु쥍क र्ा तो र्र्ि 셂प मᴂ र्ा Controller of Patents के र्ाम मᴂ िेर् बℂक ड्राफ्ट र्ा चेक के द्वारा िेजी जा सकती है जो उसी थिार् के दकसी अर्ुसूनचत बℂक मᴂ प्रित्त हो जहााँ उपर्ुक्त कार्ाालर् नथित है ।

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26842

SPECIAL NOTICE

18 Months publication as required under Section 11A of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005.

Notice is hereby given that any person at any time before the grant of Patent may give representation by way of opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules, 2006. Notice is also given that if any interested person requests for copies of the complete specification, drawing and abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as per the jurisdiction on payment of prescribed fees of Rs.8/- per page. If any further details are required to be obtained, the same can be provided by the respective Patent Offices on request.

(Om Prakash Gupta) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26843

SPECIAL NOTICE

Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005 and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III, Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published containing all the activities of The Patent Office such as publication of all the patent applications after 18th months , grant of patents & all other information in respect of the proceedings as required under the provisions of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.

The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are discontinued from 01/01/2009.

SPECIAL NOTICE

Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.

However, if duplication of publication of any application is found, then earlier date of publication will be taken for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months from the date of second publication, provided that there is there is no third party representation.

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26844

Early Publication:

The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule 24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents (Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911008557 A (19) INDIA (22) Date of filing of Application :05/03/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR TRACKING AND LOCATING MISPLACED AND LOST OBJECTS THROUGH VOICE COMMAND

:G08B0021020000, (71)Name of Applicant : G08B0021240000, 1)ABES Engineering College (51) International classification G09B0021000000, Address of Applicant :Campus -1, 19th KM Stone, NH-24, H04W0004600000, Ghaziabad Uttar Pradesh India Uttar Pradesh India G01S0013870000 (72)Name of Inventor : (31) Priority Document No :NA 1)Dr. Narbada Prasad Gupta (32) Priority Date :NA 2)Dr. Dharmendra Singh

(33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention discloses a system (100) and method (200) to help deaf and blind people for tracking and locating misplaced objects. The system (100) mainly comprises of a tiny sensor (102) attached to important belongings that can be energized as and when required by saying name of the object. This tiny sensor (102) is nothing but a Bluetooth device which is connected to a Bluetooth transceiver available in the mobile device (104). A mobile application (106) is proposed to be installed on the mobile device (104). This mobile application (106) will have the capability to learn about the tiny sensor (102) connected to each belonging. A GPS (Global Positioning System) sensor (108) is installed in the tiny sensor (102) module; if the belonging is not in the coverage of Bluetooth then GPS location will be available in the mobile device (104). This way lost belonging can be located if lost at any other location. No. of Pages : 14 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26845

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911010265 A (19) INDIA (22) Date of filing of Application :15/03/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN AEROFOIL FAN BLADE AND FANS WITH AEROFOIL BLADES

:F01D0005140000, (71)Name of Applicant : F04D0029380000, 1)ABES Engineering College (51) International classification F04D0029320000, Address of Applicant :19th Km Stone; NH-24; Ghaziabad F03D0013400000, Uttar Pradesh INDIA Uttar Pradesh India F03D0001060000 (72)Name of Inventor : (31) Priority Document No :NA 1)Monika Chauhan (32) Priority Date :NA 2)Ankur Dixit (33) Name of priority country :NA 3)Praval Kumar (86) International Application No :NA 4)Rajnesh Kumar Singh

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a blade for a domestic axial fan, said blade comprising: a root end connectable to a fan hub; a tip end opposite to the root end; and a blade region joining the root end and the tip end, the blade region including a leading edge and a trailing edge; each of the root end, the tip end and the blade region being comprised of an aerofoil shape; the leading edge including a convex curvature profile, and a concave curvature profile arranged in a sequential manner starting from said root end. No. of Pages : 15 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26846

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911037944 A (19) INDIA (22) Date of filing of Application :20/09/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : BROOMING DEVICE

:B03C0003410000, (71)Name of Applicant : B65G0015000000, 1)ABES Engineering College (51) International classification B65G0065420000, Address of Applicant :Campus -1, 19th KM Stone, NH-24, A47L0011330000, Ghaziabad Uttar Pradesh India Uttar Pradesh India A47L0005300000 (72)Name of Inventor : (31) Priority Document No :NA 1)Dr. Dharmendra Singh

(32) Priority Date :NA (33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a brooming device 1, comprising a base frame 2 installed in the device which is made up of mild steel material, a roller brush6 installed in the device that throws fine dust particles inside the device, a conveyor belt with fins 9 attached to the brush that transfers the dust particles towards the collecting chamber 3, wherein fins are used for minimizing the chances of the dust particles to move back towards the roller brush, a motor 8 mounted on the plate that provides power for the operation of the roller, a reflector 7 mounted on the roller brush that hides brush surface and reflects dust particles back on the belt portion. No. of Pages : 12 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26847

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911039417 A (19) INDIA (22) Date of filing of Application :30/09/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A PROCESS FOR FAULT DIAGNOSIS AND REMOVAL OF CASTING DEFECTS IN COPPER ALLOY FANCY FAUCETS

:B22C0009100000, (71)Name of Applicant : C22B0009100000, 1)ABES ENGINEERING COLLEGE (51) International classification C01B0011060000, Address of Applicant :Campus -1 19th KM Stone, NH 24, C22C0001020000, Ghaziabad Uttar Pradesh India Uttar Pradesh India C01B0007010000 (72)Name of Inventor : (31) Priority Document No :NA 1)DR. RAHUL SAINI (32) Priority Date :NA 2)NAVEEN KUMAR

(57) Abstract : The present subject matter relates to a process for fault diagnosis and assessment of casting defects in copper alloy fancy single taps and faucets. The process comprising the step of providing sodium hypochlorite and calcium hypochlorite; mixing the powder; injecting the mixed powder into hollow cylinder pipe; preheating the hollow cylinder pipe at temperature range of 925 - 950° C; covering a furnace by the powdered charcoal; and coating graphite powder to core of die for the flowability of the molten metal by enhancing lubrication through it. Further, the graphite powder is dissolved in water required for cooling of dies after casting. 1 to 3% plaster of Paris is added to the sand mould while making cores for brass die castings. No. of Pages : 30 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26848

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911046297 A (19) INDIA (22) Date of filing of Application :14/11/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DEVICE FOR MEASURING POWER SUPPLIED TO BASE TRANSCEIVER STATION FROM PLURALITY OF POWER SOURCES

:H02J0003140000, (71)Name of Applicant : H02J0003000000, 1)ABES Engineering College (51) International classification B60R0016020000, Address of Applicant :19th KM Stone, NH-24, Ghaziabad, H04B0001040000, Uttar Pradesh “ 201009, India Uttar Pradesh India G06F0001328700 (72)Name of Inventor : (31) Priority Document No :NA 1)Sanjay Kr. Singh (32) Priority Date :NA 2)Rajnesh Kumar Singh (33) Name of priority country :NA 3)Siddhant Bhardwaj

(86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention discloses a device to monitors and records the amount of power consumed from multiple power sources individually and/or cumulatively by a base transceiver station of a mobile communication network. On the basis of power consumption data thus recorded, it becomes possible to accurately determine the expenses incurred in supplying power to the BTS. Also, on the basis of the power consumption data thus recorded, it becomes possible to exert additional control functionalities such as providing un¬interrupted power supply, optimization of the amount of power consumed by the BTS from a particular source of power so that additional cost advantages could be derived, load shedding, etc. No. of Pages : 16 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26849

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911046548 A (19) INDIA (22) Date of filing of Application :15/11/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : IOT BASED SMART IRRIGATION SYSTEM OPERATED THROUGH MOBILE

:A01G0025160000, (71)Name of Applicant : A01C0021000000, 1)ABES Engineering College (51) International classification B63H0001000000, Address of Applicant :Campus -1, 19th KM Stone, NH-24, G01N0033240000, Ghaziabad Uttar Pradesh India Uttar Pradesh India F26B0009060000 (72)Name of Inventor : (31) Priority Document No :NA 1)Gaganpreet Kaur (32) Priority Date :NA 2)Navendra Pratap Singh (33) Name of priority country :NA 3)Aditya Aggarwal

(86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to the novelirrigation system for agriculture. The idea of the present invention is to overcome the problems farmers face during farming process. The idea saves water, time and human efforts. This smart irrigation system senses the current data of the field. The focus will be on parameters like moisture, temperature, weather, fertilizer requirement etc. The objective is to control the water flow automatically andirrigate the crops according to need. The soil sensor will detect the need of the fertilizer in it and will accordingly send the signal to the fertilizer tank to release the particular amount of substitute for the crops. The system will have a pipe line parallel to the water pipe. It will feed the crops according to its need. This will not only save water but resources and man labour. No. of Pages : 15 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26850

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911051745 A (19) INDIA (22) Date of filing of Application :13/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DEVICE AND METHOD FOR DETECTING MULTI-LAYER MOISTURE CONTENT OF SOIL USING MULTI-LAYER SOIL MOISTURE SENSOR

:A01G0025160000, (71)Name of Applicant : G01N0033240000, 1)ABES Engineering College (51) International classification G01N0027220000, Address of Applicant :Campus -1, 19th KM Stone, NH 24, G01N0027040000, Ghaziabad, Uttar Pradesh India Uttar Pradesh India E02D0003020000 (72)Name of Inventor : (31) Priority Document No :NA 1)Krishna Vir Singh (32) Priority Date :NA 2)Ashish Gupta (33) Name of priority country :NA 3)Amit Goel (86) International Application No :NA 4)Gaurav Kansal Filing Date :NA 5)Gulshan Kumar Dubey (87) International Publication No : NA 6)Mihir Rai (61) Patent of Addition to Application 7)Tarun Yadav :NA Number 8)Kartik Sachdeva :NA Filing Date 9)Harshit Gupta

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present subject matter relates to device and method for detecting the presence of moisture content at different layers of soil using multi-layer soil moisture sensors (2, 3, 4, 5). The soil moisture sensors (2, 3, 4, 5) sense the moisture level at four different depth levels from soil surface (i.e. Sl=22.86cm, S2=45.72cm, S3=68.58cm, and S4=91.44cm). Further, the device and method is provided for estimating the presence of moisture contents at different layers of soil. This multi-dimensional temporal and spatial data will lead to a decision that can lead to more precise use of water in different soil types to achieve optimal moisture use in diverse applications. No. of Pages : 25 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26851

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911054626 A (19) INDIA (22) Date of filing of Application :31/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DUSTBIN FOR DISPOSING PAPER AND PLASTIC WASTE PRODUCTS

:B30B0009300000, (71)Name of Applicant : B65F0001140000, 1)ABES Engineering College (51) International classification B26D0003160000, Address of Applicant :19th Km Stone NH-24 Ghaziabad Uttar B09B0003000000, Pradesh INDIA Uttar Pradesh India B02C0018180000 (72)Name of Inventor : (31) Priority Document No :NA 1)RAVI SHANKAR RAMAN (32) Priority Date :NA 2)DINESH BANSILAL PATHARIYA (33) Name of priority country :NA 3)GIRISH PANDEY (86) International Application No :NA 4)MAYANK BISHT

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present subject matter relates to dustbin (100) for disposing paper and plastic waste products such as, paper plate, cup, bottle, and etc., including a plurality of cutting blades (7) which is mounted on a rotating cutter shaft (17); an electric motor (1) coupled with the rotating cutter shaft (17) through a gear arrangement (10); and a compression plate (16) which can be adapted to push compressing the wastage manually and can be locked at different levels of the dustbin (100). The dustbin (100) is mounted on a plurality of rotating wheels, which can be moved from one place to another place through push and pull bar (21), where the rotation of dustbin wheel (5) can be fixed through wheel locking arrangement (22) such that movement of the dustbin (100) can be fixed at desired location as required. No. of Pages : 24 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26852

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821046333 A (19) INDIA (22) Date of filing of Application :07/12/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR MONITORING REAL-TIME TRAFFIC

:H04N0021218700, (71)Name of Applicant : H04N0007180000, 1)RISHIN JIGISHBHAI JOSHI (51) International classification G08G0001096700, Address of Applicant :A/71 ORCHID WHITEFIELD, H04N0021610000, PRAHLADNAGAR ROAD, MAKARBA, AHMEDABAD- G08G0001000000 380015 Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)RISHIN JIGISHBHAI JOSHI

(33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT SYSTEM AND METHOD FOR MONITORING REAL-TIME TRAFFIC• The present invention relates to a system and method for providing real time traffic information that includes receiving real time video data from an image capturing device like live Artificial Intelligence based footages and/or drawn footages and transmitting the captured data to the user display device through the broadcasting server. The user device having an application whereby the user can receive the live Artificial Intelligence based footages and/or drawn footages, watch the current situation of the traffic and watch live streaming of tourist places along with providing multiple solutions to Government, police and traffic police with regard to traffic management. No. of Pages : 14 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26853

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921014508 A (19) INDIA (22) Date of filing of Application :10/04/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A PROCESS FOR PREVENTION OF DEGRADATION AND DEGENERATION OF TISSUE USED IN BIOPROSTHESIS

:A61F0002240000, (71)Name of Applicant : A61L0027360000, 1)MERIL LIFE SCIENCES PVT. LTD. (51) International classification A01N0001020000, Address of Applicant :BILAKHIA HOUSE, MUKTANAND A61B0017000000, MARG, CHALA VAPI, GUJARAT - 396191, INDIA Gujarat A61K0035340000 India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)KOTHWALA, DEVESHKUMAR MAHENDRALAL (33) Name of priority country :NA 2)SHAIKH, AMIRHAMZAH MAHMADIQBAL (86) International Application No :NA 3)MINOCHA, PRAMODKUMAR

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : There is disclosed a process for treatment to avert enzymatic degradation and tissue degeneration of bovine pericardium tissue, used for making bioprosthesis for implant application, comprising the steps of collecting and harvesting raw bovine pericardial tissue; chemically cross-linking the rinsed tissue to generate fixed tissue; laser cutting said fixed tissue to produce tissue leaflet; chemically treating said tissue leaflet with AAS; chemically sterilising and storing the fixed bovine pericardium tissue to maintain the structural integrity and characteristics; and wherein all the above steps are carried out in a low-oxygen and controlled temperature environment. No. of Pages : 29 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26854

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921016239 A (19) INDIA (22) Date of filing of Application :24/04/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : BIORESORBABLE NEUROVASCULAR FLOW DIVERTER AND METHOD OF MANUFACTURE THEREOF

:D04C0001060000, (71)Name of Applicant : A61L0031140000, 1)MERIL LIFE SCIENCES PVT. LTD. (51) International classification C09D0153000000, Address of Applicant :BILAKHIA HOUSE, MUKTANAND A61F0002910000, MARG, CHALA VAPI, GUJARAT - 396191, INDIA Gujarat C23C0014340000 India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)KOTHWALA, DEVESHKUMAR MAHENDRALAL (33) Name of priority country :NA 2)DURANI, MOHAMADOVESH MOHAMADYASIN (86) International Application No :NA 3)MINOCHA, PRAMODKUMAR

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A tubular neurovascular flow diverter implant device having microporous structure for use in the treatment of intracranial aneurism, comprising plurality of bioresorbable polymer microfilaments of 20-50 micron diameter braided in one over two pattern with a braiding angle in the range of 30-200 degrees, said microfilaments being subjected to annealing treatment and being coated with bioresorbable elastomeric coating. FIG. 8 No. of Pages : 30 No. of Claims : 22

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26855

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921023312 A (19) INDIA (22) Date of filing of Application :12/06/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN IMPROVED CLOG-FREE CONDENSATION SYSTEM FOR PYROLYSIS VAPOUR OF PET CONTAINING POLYMER•

:C10G0001100000, (71)Name of Applicant : C10B0053070000, 1)SUHAS DIXIT (51) International classification C10G0001000000, Address of Applicant :AGILE PROCESS CHEMICALS LLP, B29B0017040000, B-315, SHREE NAND DHAM, PLOT NO. 59, SECTOR “ 11, B29B0017000000 CBD BELAPUR, NAVI MUMBAI-400614, MAHARASHTRA, (31) Priority Document No :NA INDIA Maharashtra India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)SUHAS DIXIT

(57) Abstract : AN IMPROVED CLOG-FREE CONDENSATION SYSTEM FOR PYROLYSIS VAPOUR OF PET CONTAINING POLYMER The present invention provides an improved clog-free condensation system for preventing clogging of pyrolysis apparatus and smooth running of thermal degradation waste plastic comprising PET component comprising of a conduit (2) carrying vapor stream received from pyrolysis reactor, condenser (3) with inlet (4) for oil-immiscible solvent stream and liquid outlet (5) for stripping of condensed pyrolysis oil as well as Benzoic-acid and its derivatives dissolved in oil-immiscible solvent and vapour outlet (6) to pass uncondensed vapours, and liquid-liquid phase separator (7) connected to outlet (5) of condenser (3) having outlets (8 and 9) for separating two immiscible phases. The present invention also relates to method for condensing pyrolysis vapour of PET polymer without formation of clog in apparatus and continuous recovery of benzoic acid and other condensable hydrocarbons as a value added products. Figure No. 1 No. of Pages : 23 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26856

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921023537 A (19) INDIA (22) Date of filing of Application :13/06/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : ENDOVASCULAR STENT GRAFT, DELIVERY DEVICEAND SYSTEM THEREFOR

:A61F0002070000, (71)Name of Applicant : A61F0002950000, 1)MERIL LIFE SCIENCES PVT LTD (51) International classification A61F0002966000, Address of Applicant :BILAKHIA HOUSE, MUKTANAND A61F0002820000, MARG, CHALA VAPI, GUJARAT - 396191, INDIA Gujarat A61F0002848000 India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)MINOCHA, PRAMODKUMAR (33) Name of priority country :NA 2)DURANI, MOHAMADOVESH MOHAMADYASIN (86) International Application No :NA 3)KOTHWALA, DEVESHKUMAR MAHENDRALAL

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT ENDOVASCULAR STENT GRAFT, DELIVERY DEVICE AND SYSTEM THEREFOR The present invention provides a self-expanding stent graft comprising plurality of shape memory alloy struts sewn on a tubular shaped surgical fabric at longitudinally substantially even distance from each other and a flared frame sewn at the distal end of the tubular fabric in a manner such that said flared frame longitudinally extends beyond the tubular fabric, wherein such struts being sinusoidal shaped and wherein such struts and flared frames being radially sewn to the fabric individually by way of blanket stitching and a delivery device therefor. Figure 2a No. of Pages : 32 No. of Claims : 24

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26857

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921023829 A (19) INDIA (22) Date of filing of Application :15/06/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYNERGISTIC FUNGICIDAL COMPOSITION

:A01N0043780000, (71)Name of Applicant : A01N0043500000, 1)JDM Scientific Research Organisation Private Limited (51) International classification A01N0043560000, Address of Applicant :Block No. 58, Village Lasundra “ A01N0057120000, 391775, Taluka Savli, District Vadodara, Gujarat, India Gujarat A01N0043653000 India (31) Priority Document No :NA 2)SUMISHO AGRO INDIA PVT. LTD. (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)MUNDHRA PARIKSHIT (86) International Application No :NA 2)MOHAN JITENDRA

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT SYNERGISTIC FUNGICIDAL COMPOSITIONS The present invention relates to a synergistic fungicidal composition comprising a strobilurin based compound, validamycin and a compound A compound selected from the group comprising thifluzamide, hexaconazole, propiconazole, tricyclazole and difenoconazole. The composition of the present invention decreases application rates of each of the active ingredients and is non-phytotoxic. No. of Pages : 41 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26858

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921024853 A (19) INDIA (22) Date of filing of Application :21/06/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : CONVEYOR ASSEMBLY

:H01M0010440000, (71)Name of Applicant : G11B0017049000, 1)SAHAJANAND TECHNOLOGIES PRIVATE LIMITED (51) International classification G03G0015080000, Address of Applicant :A1, Sahajanand Estate, Wakharia Wadi, A24D0003060000, Near Dabholi Char Rasta, Ved Road, Surat, Gujarat 395004, India B65D0006220000 Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)OZA, Chirag Dineshchandra (33) Name of priority country :NA 2)CHAUDHARI, Jayeshbhai Chamanabhai (86) International Application No :NA 3)GAJJAR, Munjalkumar Dhirajlal Filing Date :NA 4)GAYWALA, Rahul Mahendra Kumar

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT CONVEYOR ASSEMBLY A conveyor assembly (100) for conveying articles includes a conveyor system (102) and a discharge assembly (104). The conveyor system has a loading end (216) to receive a plurality of articles and a discharge end (218) to deliver the plurality of articles. The conveyor system (102) is configured to carry a plurality of articles from the loading end (216) to the discharge end (218). The discharge assembly (104) is disposed at a discharge end (218) of the conveyor system (102) and has a plurality of path guides (222, 224) adapted to exhibit vibrational motion with respect to each other. The plurality of path guides (222, 224) define a passage between them to allow a sequential movement of the plurality of articles through the passage. No. of Pages : 17 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26859

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921026076 A (19) INDIA (22) Date of filing of Application :29/06/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AUTOMATED ENERGY SAVING BED

:G05D0023190000, (71)Name of Applicant : F24D0019100000, 1)ALPESH GUNVANT MEHTA, (51) International classification H04W0052020000, Address of Applicant :11/64 Anand Flats, Vijayanagar road, G06F0001320000, Naranpura, Ahmedabad “ 380013, Gujarat, India. Gujarat India F24F0005000000 (72)Name of Inventor : (31) Priority Document No :NA 1)Alpesh Gunvant Mehta

(32) Priority Date :NA (33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT AUTOMATED ENERGY SAVING BED• An automated energy saving bed (1) in a collapsible dome made from non- tearable insulated plastic or woven cloth (4), configured to be opened and closed over a bed, using automation with sensor, voice recognition, with real time clock, alternatively manually by remote control or manually pulling over a pulley. It saves energy equal to ratio of volume of room to volume of dome, during a sleep at night or day. The automated energy saving Bed (1) is integrated with Heating, cooling and ventilation (HCV) individual unit, to the required bed dome tonnage. The dome tonnage and energy at demand side is reduced, by enhanced energy efficacy with quality of air and comfort using HCV which reduce the power required by automated energy saving bed, further powered by renewable energy or conventional energy, make the system zero or low carbon product and economical at utilization. No. of Pages : 18 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26860

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921026079 A (19) INDIA (22) Date of filing of Application :29/06/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AUTOMATED MODULAR HEATING, COOLING & DUCTLESS VENTILATION SYSTEM

:B01D0053040000, (71)Name of Applicant : F24F0005000000, 1)ALPESH GUNVANT MEHTA (51) International classification F24F0007000000, Address of Applicant :11/64 Anand Flats, Vijayanagar road, F24F0012000000, Naranpura, Ahmedabad “ 380013, Gujarat, India. Gujarat India F24D0003100000 (72)Name of Inventor : (31) Priority Document No :NA 1)Alpesh Gunvant Mehta

(57) Abstract : ABSTRACT AUTOMATED MODULAR HEATING COOLING AND DUCTLESS VENTILATION SYSTEM An automated modular heating cooling and ductless ventilation system includes indoor and outdoor distribution unit with multiple sensors consisting of temperature, humidity, CO, CO2, VOC, particulate filters, smoke and/or fire, ULPA air filter and TIO2 with germicide UV LEDs. The use of vapour compression refrigeration cycle to remove heat from refrigerant to cool water mix nano particle solution source and rejects heat to another medium with water mix nano particle solution as heat recovery. The medium used within the system is tap drinking water. The vapour compression refrigeration, refrigerant used is R744 or other having zero depletion layers and global warming potential within regulatory limit. The led light is mounted over the indoor unit that controls by sensor with real time natural light intensity that maintains same light intensity as per real time output. The indoor distribution unit having wireless speaker and camera for multiple application with real time input. No. of Pages : 26 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26861

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921031211 A (19) INDIA (22) Date of filing of Application :01/08/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : BIORESORBABLE CRANIOTOMY PLUG IMPLANT AND METHOD OF MANUFACTURING THEREOF

:A61L0027560000, (71)Name of Applicant : A61F0002280000, 1)MERIL LIFE SCIENCES PVT. LTD. (51) International classification G10K0011168000, Address of Applicant :SURVEY NO. 135/139 BILAKHIA A61F0002000000, HOUSE, MUKTANAND MARG, CHALA, VAPI, GUJARAT - B01D0069120000 396191, INDIA Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)MINOCHA, PRAMOD KUMAR (33) Name of priority country :NA 2)KOTHWALA, DEVESHKUMAR MAHENDRALAL (86) International Application No :NA 3)BHAGAT, CHINTAN BIPINCHANDRA

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT BIORESORBABLE CRANIOTOMY PLUG IMPLANT AND METHOD OF MANUFACTURING THEREOF The present invention provides a craniotomy plug implant having a plurality of porous horizontal layers of lay down filaments sequentially adhered to the adjacent layer to form a layered scaffolding structure with an interconnected porous network, longitudinally extending from a proximal end having a lesser surface area to a distal end having a greater surface area, said proximal end having a lesser lay down filament width than that of the distal end and the said porous network has at least two different pore size and/or shape. FIG. 1c No. of Pages : 26 No. of Claims : 28

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26862

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921038057 A (19) INDIA (22) Date of filing of Application :20/09/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : "GREEN PROTOCOL FOR THE PREPARATION OF BENDAMUSTINE HYDROCHLORIDE"

:C08C (71)Name of Applicant : (51) International classification 21/00 1)RAYAT SHIKSHAN SANSTHAS KARMAVEER (31) Priority Document No :NA BHAURAO PATIL COLLEGE VASHI,NAVI MUMBAI (32) Priority Date :NA Address of Applicant :RAYAT SHIKSHAN SANSTHAS (33) Name of priority country :NA KARMAVEER BHAURAO PATIL COLLEGE SECTOR 15 A, (86) International Application No :NA PKC ROAD JUHUNAGAR, VASHI, NAVI MUMBAI-400703 Filing Date :NA Maharashtra India (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)DR. GURUMEET C. WADHAWA Filing Date :NA 2)DR. VITTHAL S. SHIVANKAR (62) Divisional to Application Number :NA 3)MR. YASHWANT A GAIKWAD

Filing Date :NA

(57) Abstract : GREEN PROTOCOL FOR THE PREPARATION OF BENDAMUSTINE HYDROCHLORIDE ABSTRACT The present invention relates to an improved green protocol for the synthesis of bendamustine, in particular, bendamustine hydrochloride of the formula ( ) and its intermediate 1-me thyl-5-bis(2-chloroethyl)amino)-lH-benzimidazol-2-yl) lithium butanoate -of formula (-5-Bis(2- chloroethyl) amino- 1-methy 1-2 benzimidazolylbutyric acid hydrochloride ), both having a purity of >95%, which is simple, faster convenient, economical, does not use hazardous chemicals and is industrially viable. No. of Pages : 19 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26863

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921040493 A (19) INDIA (22) Date of filing of Application :07/10/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : NOVEL METHOD FOR THE PREPARATION OF POWDER FROM LATEX OF CALOTROPIS PROCERA AND STUDY ITS VARIOUS APPLICATIONS

(71)Name of Applicant : :A61K 1)RAYAT SHIKSHAN SANSTHA'S KARMAVEER (51) International classification 36/00 BHAURAO PATIL COLLEGE (31) Priority Document No :NA Address of Applicant :SECTOR 15 A, PKC (32) Priority Date :NA ROAD,JUHUNAGAR, VASHI,NAVI MUMBAI, (33) Name of priority country :NA MAHARASHTRA,INDIA, PIN CODE: 400703 Maharashtra (86) International Application No :NA India Filing Date :NA 2)RAYAT SHIKSHAN SANSTHA (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)MS. UTKARSHA R. SONAWANE Filing Date :NA 2)MS. AANCHAL B. UPADHYAY (62) Divisional to Application Number :NA 3)DR. GURUMEET C WADHAWA Filing Date :NA 4)DR. VITTHAL S. SHIVANKAR

5)MR. YASHWANT A GAIKWAD

(57) Abstract : Novel Method for the Preparation of the Calotropis procera Latex Powder and their various applications Abstract: The invention relates to dried latex (DL) in the powder form of Calotropix procera and to Surface tension activity and its Blood Clotting Activity with the better antioxidant activity. The DL in powder form was in ethanol solution as 10 % used for the clotting of the blood .The aqueous Solution was showing best antioxidant Activity Further, the DL suspension did not show any observable side effects .This dried latex was used for showing better surface tension activity. Solution used from 1 % to 25 %. No. of Pages : 18 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26864

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921053666 A (19) INDIA (22) Date of filing of Application :24/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : NOVEL APPLICATIONS OF DIFFERENT EXTRACTS OF ARECA NUT

(71)Name of Applicant : :A61K 1)RAYAT SHIKSHAN SANSTHA'S KARMAVEER (51) International classification 31/00 BHAURAO PATIL COLLEGE,VASHI,NAVI MUMBAI- (31) Priority Document No :NA 400703 (32) Priority Date :NA Address of Applicant :SECTOR 15 A, PKC ROAD, (33) Name of priority country :NA JUHUNAGAR, VASHI, NAVI MUMBAI - 400703, (86) International Application No :NA MAHARASHTRA, INDIA. Maharashtra India Filing Date :NA 2)Rayat Shikshan Sanstha,satara (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)SANGEETA HIRARAM CHOUDHARY Filing Date :NA 2)PRANJAL RAMCHANDRA MATNE (62) Divisional to Application Number :NA 3)DR. GURUMEET C. WADHAWA Filing Date :NA 4)DR. VITTHAL S. SHIVANKAR

5)MR. YASHWANT A. GAIKWAD

(57) Abstract : Novel Applications of Different Extracts of Areca Nut ABSTRACT: The present invention relates to blood coagulation and a composition for external application for preventing blood loss during the injury. Dried powders of Areca nut,.red and white, are prepared separately and are extracted with different polar and non-polar solvents. Methanol was subjected to column chromatography, the fraction 1 to 4 used for the study. All fractions show excellent activity for both red-and.white. Arecanut seed has been used for medicinal purposes since more than 2000 years in South Asian countries. Various pharmacological activities have been found in the arecanut seed extract or its ingredients. Prevention of oxidative stress convinced diseases is very important now days.Customary use of the plant for medicinal properties is to be recognized for its possible use as future medicines or drugs. There is a need for categorizingnatural plant sources to acquire their recognized healing properties, which may widen them to use as new therapeutics for innumerable diseases. It has been defined about usefulness of arecanut as an herbal drug and its therapeutics claim prospects. Traditional use of medicines is standard as a way to learn about the potential of future medicines. Plants have evolved the capability to synthesize chemical compounds that help them defend against attack from a wide variety of predators such as insects, fungi and herbivorous creatures. Many compounds are secondary metabolites generally involved in plant adaptation to environmental stress situations. Plants are a tremendous source for the sighting of new products of medicinal value for drug improvement. Many of the drugs used today are simple synthetic modifications or copies of the naturally obtained substances. No. of Pages : 14 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26865

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921054638 A (19) INDIA (22) Date of filing of Application :31/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SURFACTANT, ANTI-FLEA AND ANTIBACTERIAL ACTIVITY OF EUPHORBIA TIRUCALLI.

:A61K (71)Name of Applicant : (51) International classification 31/00 1)RAYAT SHIKSHAN SANSTHA, SATARA (31) Priority Document No :NA Address of Applicant :CENTRAL OFFICE, KARMAVEER (32) Priority Date :NA SAMADHI PARISAR, POWAI (33) Name of priority country :NA NAKA,SATARA,MAHARASHTRA, INDIA,PIN CODE: (86) International Application No :NA 415001 Maharashtra India Filing Date :NA 2)RAYAT SHIKSHAN SANSTHA'S KARMAVEER (87) International Publication No : NA BHAURAO PATIL COLLEGE VASHI, NAVI MUMBAI (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)DR. GURUMEET C. WADHAWA (62) Divisional to Application Number :NA 2)DR. VITTHAL S. SHIVANKAR Filing Date :NA 3)MR. YASHWANT A. GAIKWAD

(57) Abstract : SURFACTANT, ANTI-FLEA AND ANTIBACTERIAL ACTIVITY OF EUPHORBIA TIRUCALLI ABSTRACT The present invention generally refers latex of plants from Euphorbia tirucalli are converted into powder form and then extracted in a polar solvent. These fractions of polar solvent contain one or more compounds contained in them. These fractions are used as good surfactant, shows good antibacterial and antifungal activity. They also have very good chelating property; they bind metal and form complexes. Micronutrients are chelated with the powder of Euphorbia tirucalli latex; this is good replacement for EDTA- Micronutrient Complex. No. of Pages : 13 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26866

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021001218 A (19) INDIA (22) Date of filing of Application :10/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : HYBRID WATERING SYSTEM FOR ANIMALS

:F22B0001000000, (71)Name of Applicant : A01K0029000000, 1)HRIDBEG CHOUDHURY (51) International classification F04B0041020000, Address of Applicant :501, VEDANT PEARL, GAWANDE E03B0001040000, L/O, CHATTRAPATI SQUARE, NAGPUR - 440015 F24F0006000000 Maharashtra India (31) Priority Document No :NA 2)ISHITA CHOUDHURY (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)HRIDBEG CHOUDHURY (86) International Application No :NA 2)ISHITA CHOUDHURY

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : HYBRID WATERING SYSTEM FOR ANIMALS Disclosed is a hybrid watering system for forest animals for preventing water loss due to day light water evaporation. The system in accordance with the present invention includes a waterhole 102, a water tank 104, a pump 106, a first pipe 108, a detection unit 110, a control unit 112, a second pipe 114, a third pipe 116, a solar unit 118, a battery bank 120, a collection tank 122 and a filter 124. The waterhole 102 is created artificially over ground surface. The water tank 104 is situated under ground level at predefined depth from ground. The waterhole 102 located at the ground level and the water tank 104 is advantageously positioned underground below the waterhole 102. The water tank 104 is coupled with the pump 106. One end the first pipe 108 is coupled to pump 106 whereas other end is connected to the waterhole 102. Fig. 1 (for publication) No. of Pages : 26 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26867

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021005617 A (19) INDIA (22) Date of filing of Application :09/02/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A METHOD FOR RECOVERING COBALT & COPPER FROM WHITE ALLOY OR ALLIAGE BLANC

:C22B0003000000, (71)Name of Applicant : C22B0015000000, 1)RUBAMIN LTD. (51) International classification C22B0003080000, Address of Applicant :Rubamin Ltd,23, Shree Laxmi C22B0003100000, Industrial Estate, Dunia, Halol, City Vadodara State Gujarat C22B0059000000 Country India Pin code 389350 Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)MR. BHARAT PADH (33) Name of priority country :NA 2)MR. BATUA GHADAI (86) International Application No :NA 3)MR. RAMACHANDRA REDDY BONTHA Filing Date :NA 4)MR. SURESH KIZHAKKETHIL RAMACHANDRAN

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method for recovering cobalt and copper from white alloy or Alliageblanc comprises 2 stage leaching step in which a quantity of white alloy or Alliageblanc is treated with an aqueous, acidic solution containing sulfate ion to form a soluble sulfate of the valuable metal contained in the white alloy/Alliageblanc. This first leach is conducted under conditions in which the Cobalt and Iron contained in the white alloy/Alliageblanc is oxidized and transiently forms soluble sulfates. Leached solution is further processed for removal of iron either by atmospheric pressure or autoclave pressure. Further the pure leached solution Cobalt is converted to insoluble compounds and Cobalt precipitate out of the solution. A solid residue is further treated with sulphuric acid for further separation of valuable-metal containing in solid fraction from the containing solid residue, and further processed in 2nd stage to recover the valuable metals such as copper and cobalt therefrom. No. of Pages : 31 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26868

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021010715 A (19) INDIA (22) Date of filing of Application :12/03/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : TEA/COFFEE JAGGERY GRANULES

:B65D0085808000, (71)Name of Applicant : A23F0005240000, 1)Rajesh Shankarrao Girme (51) International classification C11D0007320000, Address of Applicant :MahaAssam Tea Company, Next to G07F0013060000, Goldsgym, Canada corner, Vasant market, Nashik, Maharashtra A47J0031060000 422005, India Maharashtra India (31) Priority Document No :NA 2)Supriya Rajesh Girme (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)Rajesh Shankarrao Girme (86) International Application No :NA 2)Supriya Rajesh Girme

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A tea/coffee jaggery granules is made to prepare a tea/coffee beverage by adding just a hot water into it instead of sugar and milk. A thick tea/coffee decoction and sugarcane juice is mixed and simmered in a pan and once it reaches a semisolid state it is cooled and poured in a mould to make a tea/coffee jaggery granules which is used for making a tea/coffee beverage. (fig. 1) No. of Pages : 16 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26869

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021011960 A (19) INDIA (22) Date of filing of Application :19/03/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD TO PRODUCE STIMULI SENSITIVE UV ABSORBING POLYMERS

:A61Q0017040000, (71)Name of Applicant : A61K0008810000, 1)GALAXY SURFACTANTS LTD. (51) International classification A61Q0005120000, Address of Applicant :C-49/2, TTC Industrial Area, Pawne, A61Q0017000000, Navi Mumbai 400 703, Maharashtra, India Maharashtra India C11D0003180000 (72)Name of Inventor : (31) Priority Document No :NA 1)KOSHTI, Nirmal (32) Priority Date :NA 2)KURAKULA THULASIRAMREDDY, Prabhu Charan

(57) Abstract : Eco-friendly aqueous synthesis of substantive, UV-absorbing, cationic polymers with ˜inverse temperature dependent solubility™ are described in the present invention. These polymers are water-soluble at ambient temperature and water-resistant at temperature of human body as well as in the presence of electrolytes. This property makes these polymers useful for personal care products that are designed for protecting skin and hair from damages of UV radiation. The invention relates to aqueous synthesis of polymers of Formula I wherein, ArCO is an UV absorbing moiety selected from 2-cyano -3, 3-diphenyl acryloyl, and p-methoxy cinnamoyl, R1 is selected from H, C1-C3 alkyl group and R2 is selected from C1-C3 alkyl group, m and n are integers wherein n is selected from 1 to 5 and m = 40. Formula I No. of Pages : 40 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26870

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021012566 A (19) INDIA (22) Date of filing of Application :23/03/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A TWIN WIRE TUCKER

:D21F0009000000, (71)Name of Applicant : A61B0001000000, 1)SARODE, Karishma Rajiv (51) International classification A61B0017300000, Address of Applicant :Krishna Institute of Medical Sciences A61B0017280000, Deemed to be University•, Karad, NH 4, Near Dhebewadi Road, C23C0004131000 Malkapur, Karad -415539, Maharashtra Maharashtra India (31) Priority Document No :NA 2)PAWAR, Renuka Lalit (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)SARODE, Karishma Rajiv (86) International Application No :NA 2)PAWAR, Renuka Lalit

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Abstract Title: A twin wire tucker The present invention provides a twin wire tucker 100. The twin wire tucker 100 is having a pair of arms 10a and 10b attached together at a proximal end 20 and each of the arms 10a and 10b has a bend 30a and 30b at a distal end. Also, a locking arrangement 40 is configured between the pair of arms 10a and 10b for locking the pair of arms 10a and 10b at a desired angle therebetween. A slot 50a and 50b are configured at the distal end of each of the arms 10a and 10b for holding the wire while performing dental treatment. The twin wire tucker 100 has an advantage of preventing debonding of the bracket from the tooth surface. Figure 1 No. of Pages : 13 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26871

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021014659 A (19) INDIA (22) Date of filing of Application :02/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN APPARATUS AND A METHOD FOR ELECTRICITY GENERATION

:H02K0007180000, (71)Name of Applicant : F26B0017200000, 1)HITESH GULABRAI DESAI (51) International classification G06Q0050060000, Address of Applicant :DENA BANK SADAN, GROUND F23G0005460000, FLOOR, BACK SIDE, NEXT TO VORA PALACE, M.G. F24F0007060000 ROAD, KANDIVALI (WEST), MUMBAI 400067, (31) Priority Document No :NA MAHARASHTRA, INDIA Maharashtra India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)HITESH GULABRAI DESAI

(57) Abstract : AN APPARATUS AND A METHOD FOR ELECTRICITY GENERATION ABSTRACT An apparatus for electricity generation is provided. The apparatus includes an air handling unit which absorbs air from an atmosphere and regulates a velocity of flow of the air. The apparatus also includes a hollow chamber which includes a first end and a second end, and provides a passage for the air. Further, the apparatus includes at least two conduits which includes an inlet end and an outlet end respectively, and receives the air from the hollow chamber. The apparatus also includes an electric power generation unit which includes a rotor which rotates at a pre-defined rotation speed, an electricity generator which generates a pre-defined amount of electricity and multiple outlets which releases the air. Furthermore, the apparatus includes a power management unit, wherein an electric power supply from the electric power generation unit is fed back to power the air handling unit. FIG. 1 No. of Pages : 22 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26872

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021014780 A (19) INDIA (22) Date of filing of Application :02/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : NOVEL HAEMOSTASIS AGENT AND PREPARATION THEREOF•

:A61K0033060000, (71)Name of Applicant : C08L0097020000, 1)PATEL, Reena (51) International classification C08L0023020000, Address of Applicant :11/12, Udyog Nagar, S.V. Road, G01N0033490000, Goregaon West, Mumbai - 400104, Maharashtra, India C08C0019080000 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)PATEL, Dinesh Shantilal (33) Name of priority country :NA 2)PATEL, Sachin Dinesh (86) International Application No :NA 3)KURANI, Shashikant Prabhudas Filing Date :NA 4)SATHE, Milind Vinayak

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT NOVEL HAEMOSTASIS AGENT AND PREPARATION THEREOF• Novel process to produce Feracrylum of intermediate molecular weight is described. Intermediate molecular weight Feracrylum is better than Feracrylum known in the prior art. Finished product produced from Intermediate molecular weight Feracrylum has consistent viscosity and hence allows smoother uniform application. Intermediate molecular weight polymer with suitable Iron content is useful in preparing a homogeneous composition, does not pose compounding difficulties and thereby exhibits favourable haemostatic activity. It exhibits excellent protein binding ability. It causes coagulation of blood without interfering with natural cascade. No. of Pages : 26 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26873

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021015082 A (19) INDIA (22) Date of filing of Application :06/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A WEARABLE DEVICE FOR ORTHOPAEDIC TREATMENT

:A61N0001360000, (71)Name of Applicant : A61N0001040000, 1)NIKAM, Prasannajeet Pramod (51) International classification A61B0005053000, Address of Applicant :Krishna Institute of Medical Sciences A61F0005020000, Deemed to be University•, Karad, Krishna College of A63B0023020000 Physiotherapy, NH 4, Near Dhebewadi Road, Malkapur, Karad - (31) Priority Document No :NA 415539, Maharashtra Maharashtra India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)NIKAM, Prasannajeet Pramod

(57) Abstract : Abstract Title: A wearable device for orthopaedic treatment The present invention provides a wearable device 100 for orthopaedic treatment. The wearable device 100 includes a support member 200 adapted to wear around the body of the user. The support member 200 has an arm-strap 210 and a lumbar belt 220 to ensure fitting over the body of the user. Further, the support member 200 is configured with rubber pad electrodes 110 and vacuum suction cups 120. Neuromuscular electrical stimulation is provided through the rubber pad electrodes 110, facilitating passive contraction and relaxation of the muscles. The device 100 is especially for treating lower back pain. It also facilitates in removal of waste-products like lactic-acid and thus helps to improve the physiological properties of the muscle like flexibility, contractibility etc. Figure 1 No. of Pages : 16 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26874

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021015770 A (19) INDIA (22) Date of filing of Application :11/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A GARBAGE PICKING MECHANISM

:B65F0001140000, (71)Name of Applicant : B30B0009300000, 1)Mahesh Shende (51) International classification B62J0001120000, Address of Applicant :Incubatee at G H Raisoni Incubation A01D0045220000, Cell, having address plot no.94, Waghdhara, near Mother Mary B65F0001160000 Convent, Rajiv Nagar, Hingna Road, Nagpur- 440016, (31) Priority Document No :NA Maharashtra, India Maharashtra India (32) Priority Date :NA 2)Nihal Wargantiwar (33) Name of priority country :NA 3)Nitin Parshuramkar (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Mahesh Shende (87) International Publication No : NA 2)Nihal Wargantiwar (61) Patent of Addition to Application Number :NA 3)Nitin Parshuramkar

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a garbage picking mechanism. The object of the mechanism is to collect the garbage in efficient way just by pushing the proposed assembly. The front assembly of machine has four rubber strips. It pushed the garbage in front of it with the help of bottom plate on flight conveyor. The flight conveyor driven by gear and sprocket arrangement is fixed on shaft of front wheels and rotates in opposite in unidirectional manner. The garbage moves in upward direction and dump in dustbin. The skipped garbage from bottom plate is pushed by roller brush in dustbin. If irregular surface comes in contact with bottom plate, it adjusts accordingly due to small wheel attached to it. Whereas frame is auto-adjust through wheels. Following invention is described in detail with the help of Figure 7 of sheet 4 showing isometric view of garbage picker machine with picker mechanism. No. of Pages : 17 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26875

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021016003 A (19) INDIA (22) Date of filing of Application :13/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A CLOSED LOOP TASK MANAGEMENT SYSTEM AND METHOD THEREOF

:G06Q0010060000, (71)Name of Applicant : G06Q0010100000, 1)Serapis Knowledge Solutions Private Limited (51) International classification G06F0008340000, Address of Applicant :Unit 16-A, H&G House, Sector-11, G06F0016510000, CBD Belapur, Navi Mumbai “ 400 614 Maharashtra India G06Q0040000000 (72)Name of Inventor : (31) Priority Document No :NA 1)Krishnamurthi Balasubramaniam

(32) Priority Date :NA (33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention provides a close-looped task management system (100) with a coordination, verification & validation phase involving a collaborative productivity platform with intuitive humanlike cognitive ability to create, assign, manage, monitor the scheduled item and to seamlessly maintain the status report, comprising of: a time engine module (201); a contact module (202); a location module (203); an action logic module (204); an additional logic module (205); a knowledge engine module (206); a cognitive intelligence module (299); a request module (102); an user interface device (101); and a closed loop feedback (300). The present invention thereby provides a platform for productivity enhancement through cognitive workflow for interaction of databases, to merge the present and future tasks, organized working to optimize time and efficient. Further the present invention creates a knowledge repository of ideas and information for future assignment and trainings based on demonstrated skillsets of performers thereby providing a greater probability of success for the tasks, events and projects. No. of Pages : 25 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26876

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021016127 A (19) INDIA (22) Date of filing of Application :14/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : INSTRUMENT CASTING SHADE SHADOW PATTERN

:G01B0011240000, (71)Name of Applicant : B23K0031020000, 1)VALSSON, Sheeba (51) International classification H01J0037317000, Address of Applicant :Shri Datta Meghe College of A61B0090110000, Architecture, Near YCCE, Wanadongri, Hingna Road, A63B0069000000 Wanadongri, Nagpur - 441110, Maharashtra, India. Maharashtra (31) Priority Document No :NA India (32) Priority Date :NA 2)SALUJA, Tanya (33) Name of priority country :NA 3)DAHAKE, Sharad (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)VALSSON, Sheeba (87) International Publication No : NA 2)SALUJA, Tanya (61) Patent of Addition to Application Number :NA 3)DAHAKE, Sharad

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention discloses a system for determining a shadow pattern cast by a fixed light source on a model, said system comprising: a frame, said frame is fixed; a mounting device pivotally mounted on said frame for an adjustable tilting movement, and said adjustable tilting movement is in horizontal plane; a first platform mounted on the said mounting device, and said model is configured to be placed on said first platform, wherein said first platform is configured to be adjustably rotated to an angular position with reference to said light source in accordance to a selected hourly setting. No. of Pages : 19 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26877

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021016199 A (19) INDIA (22) Date of filing of Application :15/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A WATER POWERED PULSED COMBUSTION ENGINE

:C25B0001040000, (71)Name of Applicant : F02B0001120000, 1)GODBOLE, Revati Ulhas (51) International classification F02M0025120000, Address of Applicant :'Ulhas' Bunglow" plot no.8" S.no.88/3, F02M0021020000, Chintamani Nagar. Sahakar Nagar-2. Pune -411009. Maharashtra F02B0043100000 India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)GODBOLE, Kaushik Ulhas

(57) Abstract : Abstract Title: A Water-Powered Pulsed Combustion Engine The present invention is to provide a water-powered pulsed combustion engine 100. The engine 100 comprises a water reservoir for storing and supplying water into an electrolytic cell 110 to convert water into a homogeneous mixture of hydrogen and oxygen gas. A compressor 120 is compressing the received homogeneous mixture of hydrogen and oxygen gas from the electrolytic cell 110to a predefined pressure value. A manifold 130 is used for holding the compressed homogeneous mixture for a predefined duration. A combustion chamber 150 arranged with an ignition coil holes 152 facilitating combustion of the compressed homogeneous mixture. An auto controlled valve 140 configured for allowing and disallowing flow of compressed gas to the combustion chamber 150 and the storage tanks 160. An auto controlled exhaust valve 180 is connected to the combustion chamber 150 for exhausting an extremely highly pressurized exhaust gas through a nozzle 190 to provide thrust. Figure 1 No. of Pages : 30 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26878

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021017543 A (19) INDIA (22) Date of filing of Application :24/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : 3-(2-AMINO-6-(SUBSTITUTED) PHENYLPYRIMIDIN-4-YL)-2H-CHROMEN-2-ONE AND THEIR ANTICANCER ACTIVITY

:C07D0473060000, (71)Name of Applicant : A61K0045060000, 1)Sawant Ramesh Lakshman (51) International classification A61K0031537700, Address of Applicant :Dr. V.V.P.F's College of Pharmacy, C07C0059080000, Vilad - Ghat, Post MIDC, Ahmednagar Maharashtra India C07D0413040000 2)Lunkad Amit Subhashchand (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Sawant Ramesh Lakshman (33) Name of priority country :NA 2)Lunkad Amit Subhashchand

(57) Abstract : The present invention provides compound of Formula A their pharmaceutically acceptable salts and their isomers, stereoisomers, conformers, tautomers, polymorphs, hydrates, and solvates; wherein, R is selected from Hydrogen, Hydroxy, Chlorine, Fluorine, Bromine, N,N-Dimethylamine, Methoxy, Nitro and Methyl group. The compound of Formula A inhibits growth of cancer cells. The compound of Formula A has potential for treatment of cancer. No. of Pages : 28 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26879

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021017833 A (19) INDIA (22) Date of filing of Application :27/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD TO DETECT HEALTH CONDITION BASED ON ULTRASOUND IMAGES

:A61B0008080000, (71)Name of Applicant : A61B0008000000, 1)DEEPA PARASAR (51) International classification G06T0007110000, Address of Applicant :A-804, PLOT NO 37, GAYATRI G06K0009000000, HERITAGE, SECTOR-20, KHARGHAR, NAVI MUMBAI, G06K0009460000 MAHARASHTRA, INDIA Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)DEEPA PARASAR

(57) Abstract : SYSTEM AND METHOD TO DETECT HEALTH CONDITION BASED ON ULTRASOUND IMAGES ABSTRACT A system to detect automatically health condition based on ultrasound images is disclosed. The system includes an ultrasound image processing module, configured to process a plurality of ultrasound images captured by a plurality of ultrasound machines for removing noise via filters. The system includes an image segmentation module, configured to segment each of the plurality of ultrasound images into one or more segment and conduct quantitative and qualitative analysis on the one or more segment. The system includes a feature extraction module, configured to extract one or more feature information from analysed one or more segments of each of the plurality of ultrasound images via extraction techniques. The system includes an image detection module, configured to classify the analysed one or more segments of each of the plurality of ultrasound images and detect the health condition in the plurality of ultrasound images captured by a plurality of ultrasound machines. FIG. 1 No. of Pages : 27 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26880

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021020276 A (19) INDIA (22) Date of filing of Application :13/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DESIGN AND DEVELOPMENT OF LIQUID FOOD DISPENSER ASSEMBLY

(71)Name of Applicant :

1)Mr.Siddharth Pawar :A47J0031520000, Address of Applicant :Sriramnagari society ,Flat No-A- A23F0003180000, 6,opposite Icchapurti mandir,Chandrabhaga Nager,Katraj,Pune (51) International classification A23F0005260000, Maharashtra India A47J0031440000, 2)Mr.Digvijay Dilip Sawant B67D0001000000 3)Mr.Akshay Balu Powar (31) Priority Document No :NA 4)Mr.Saurabh Sudhir Sawant (32) Priority Date :NA 5)Mr.Piyush Rode (33) Name of priority country :NA 6)Mrs.Mayuri Rode. (86) International Application No :NA 7)Mr.Vivekanand A Naikwadi Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)Mr.Siddharth Pawar (61) Patent of Addition to Application Number :NA 2)Mr.Digvijay Dilip Sawant Filing Date :NA 3)Mr.Akshay Balu Powar (62) Divisional to Application Number :NA 4)Mr.Saurabh Sudhir Sawant Filing Date :NA 5)Mr.Piyush Rode 6)Mrs.Mayuri Rode.

(57) Abstract : The present invention relates to a liquid food dispensing apparatus. The invention concerns a dispenser system and a method for dispensing hot or cold liquid beverages or liquid concentrates in particular quantity at various iteration and having different densities. An apparatus for producing a various food products by performing one or more chemical or mechanical processes may receive the request to produce the specified purpose final mixture from Programmable control Unit. The apparatus include a controller that initiates and controls execution of the process to produce the specified operation which consist of mixing of particular liquid ingredient in perfect quantity, the invention is so designed that it consist of specific programmable setting which disclose the various ingredients from reservoir of different shapes in different quantity to have the calibrated test of final mixture product at every iteration. The dedicated final mixture is remain same at every time irrespective of various operator controlling the dispenser machine, so that unique test of final product will remain same. The controller may adaptively apply one or more process accelerators during one of the processes to accelerate the process or to achieve the desired qualitative or quantitative characteristics for the beverage or its components. While one process for producing the beverage is running, another process may be executed for the production of this beverage. The controller will determine the time to perform each process, the time at which the beverage is to be provided, the resources to be used to perform the process, or the time at which the cleaning process is to be performed, depending on the actual or expected demand of the mixture or the target time for beverage recovery have. The shared resource may be applied to the creation of a beverage for a high priority order while the partially completed beverage for the lower priority order is being staged for subsequent progress. No. of Pages : 5 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26881

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021021469 A (19) INDIA (22) Date of filing of Application :21/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN APPARATUS AND METHOD FOR EVALUATING AN ATTRIBUTE OF A PRODUCT ITEM

:G06Q0010080000, (71)Name of Applicant : G06Q0020200000, 1)HeadIT Private Limited (51) International classification G06K0007100000, Address of Applicant :B2 802, Mantra Majestica, Sasane H04N0005330000, Nagar, Hadapsar, Pune, Maharashtra, India. Maharashtra India H04N0003140000 (72)Name of Inventor : (31) Priority Document No :NA 1)THAKKAR, Kewal Pankaj (32) Priority Date :NA 2)THAKKAR, Poonam Kewal

(57) Abstract : In an aspect, the present disclosure provides a portable holder apparatus (108) and a method (400) to generate or evaluate one or more expected product attributes associated with chosen product item (170). The portable holder apparatus (108) includes a receptacle portion (112), a holder tag (120), and one or more sensors (110). The holder tag (120) may be configured to be scanned by a scanning device (106) integrated with a user device (104) associated with a user (102), to link identity attributes of the portable holder apparatus (108) with the user device (104), wherein, in the linked state, the scanning device (106) may be configured to scan a product tag (172) associated with the chosen product item (170), to obtain a first information associated with the chosen product item (170), to generate the one or more expected product attributes associated with the chosen product item (170). No. of Pages : 32 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26882

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021021828 A (19) INDIA (22) Date of filing of Application :25/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : LINE/SELF STARTING PERMANENT MAGNET SUBMERSIBLE ELECTRIC MOTOR

:H02K0005132000, (71)Name of Applicant : H02K0001270000, 1)Duke Plasto Technique Pvt. Ltd. (51) International classification H02K0021460000, Address of Applicant :N. H. 27, Deesa Highway, Badarpura, H02K0005128000, Palanpur385511, Gujarat, India. Gujarat India F04D0013100000 (72)Name of Inventor : (31) Priority Document No :NA 1)Patel Lalitkumar Persottambhai

(32) Priority Date :NA (33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : LINE/SELFSTARTINGPERMANENT MAGNET SUBMERSIBLE ELECTRIC MOTOR The present invention relates a submersible electric motor and more particularly it relates to a line/self-starting permanent magnet submersible electric motor having a combination of squirrel cage induction submersible electric motor and permanent magnet electric submersible motor which avoid electronics controller or drive for starting and running in operation reduce the cost of system and reduce of complexity of operation and system. The line/self-starting permanent magnet submersible electric motor comprises a rotor assembly having a rotor shaft (16) which made from a shaft having a circular section, a flux barrier (17)and the magnetic structure is salient with the inductance resulting in an additional reluctance torque component and increased motor output, a plurality of permanent magnets (18)is arranged outward radially of the rotor shaft (16), a stamping (19)and a plurality of conductor bars (20)are arranged inward of radially of the stator body (12). No. of Pages : 29 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26883

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021022314 A (19) INDIA (22) Date of filing of Application :28/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PORTABLE, COMPACT AEROSOL SUCTION AND AIR PURIFIER.

:A61B (71)Name of Applicant : (51) International classification 17/00 1)CRASTA ALVIA ANTHONY (31) Priority Document No :NA Address of Applicant :GREEN VALLEY C. H. S. LTD., 501, (32) Priority Date :NA 2B, SAKI VIHAR COMPLEX, SAKINAKA, MUMBAI-400 072, (33) Name of priority country :NA INDIA. Maharashtra India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)DR. KUMAR PRASHANT (87) International Publication No : NA 2)MRS. CHAURASIA RICHA

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : 11. ABSTRACT: This invention relates to a portable, compact aerosol suction and air purifier unit. The invention relates to suction of aerosols created during various medical and surgical procedures. The said invention by suctioning of the aerosols prevents the risk of cross infection/ contamination between patients and health care professionals. More particularly, this present invention relates to a portable, compact, durable, cost effective suction unit and air purifier. Furthermore, this invention has an in built air purifier with functions independently of the suction motor. No. of Pages : 18 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26884

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021022556 A (19) INDIA (22) Date of filing of Application :29/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD TO CREATE SENSORY STIMULI EVENTS

(71)Name of Applicant : 1)Vivek Dubey Address of Applicant :B 5 Paras Residency, Pimple Saudagar, Pune “ 411027, Maharashtra, India Maharashtra India 2)Awadhesh Pratap Singh 3)Nitin Agarwal 4)Rajesh Kumar Singh 5)Manmohan Singh 6)Rashmi Sachin Jahagirdar 7)Nisarg Vasani 8)Amit Kumar Chandrakar 9)Pankaj Kumar Rai 10)Priyesh Tiwari :H04W 11)Prashant Dubey (51) International classification 16/00 12)Akshay Dubey (31) Priority Document No :NA 13)Shuchita Prasad (32) Priority Date :NA 14)Priyanka Tiwari (33) Name of priority country :NA 15)Abhilash Shrivastava (86) International Application No :NA 16)Rashmi Mathur Filing Date :NA 17)Namrata Choukse (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Vivek Dubey Filing Date :NA 2)Awadhesh Pratap Singh (62) Divisional to Application Number :NA 3)Nitin Agarwal Filing Date :NA 4)Rajesh Kumar Singh

5)Manmohan Singh 6)Rashmi Sachin Jahagirdar 7)Nisarg Vasani 8)Amit Kumar Chandrakar 9)Pankaj Kumar Rai 10)Priyesh Tiwari 11)Prashant Dubey 12)Akshay Dubey 13)Shuchita Prasad 14)Priyanka Tiwari 15)Abhilash Shrivastava 16)Rashmi Mathur 17)Namrata Choukse

(57) Abstract : SYSTEM AND METHOD TO CREATE SENSORY STIMULI EVENTS ABSTRACT A system to create sensory stimuli events is disclosed. The system includes a video scene analysing module, configured to analyse an image frame for odour evaluation. The system includes an odour stimuli module, configured to select an odour from a pre-stored set of odour in-accordance to evaluated odour and disperse a selected odour from the one or more canisters. The system includes a facial analysis module, configured to analyse the viewer facial expression image by emotion detection techniques to identify acceptance level of the dispersed odour and also detect maximum interaction instant with respect to the video scene of interest. The system includes a holographic simulation module, configured to create a holographic simulation of analysed video scene of interest based on detected maximum interaction instant of the viewer and configured to present created holographic simulation for the viewer in real time along with the video scene. FIG. 1 No. of Pages : 30 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26885

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021024043 A (19) INDIA (22) Date of filing of Application :08/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SYSTEM AND PROCESS FOR FINANCIAL MANAGEMENT WITH CUSTOMER SELF SERVICE

:G06F (71)Name of Applicant : (51) International classification 16/00 1)Suyog Arunrao Amrutrao (31) Priority Document No :NA Address of Applicant :Sinhasan Near Mehta Hospital, Tuljapur (32) Priority Date :NA 413601 Dist Osmanabad, Maharastra Maharashtra India (33) Name of priority country :NA 2)Hanumanth Shriram Patil (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Suyog Arunrao Amrutrao (87) International Publication No : NA 2)Hanumanth Shriram Patil

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A system and process for financial management with customer self-services to enable an individual and a household in managing their basic financial needs providing the financial management plan to a user system from the mobile/computer-implemented self-service financial management planner, which monitors, the user"s actions related to implementation of the recommendations in the financial management plan and financial data over a selected period of time by a predetermined periodic review whether any of the user data has changed. The system and process retrieves user data; generating a financial management plan comprising recommendations for the user using a system-implemented self-service financial management planner and determines, the user"s risk tolerance based on change in users™ financial situation by analyzing the user"s actions related to implementation of the recommendations in the financial plan in view of the financial data. Further, it generates a revised financial management plan so that the revised financial plan is aligned with the user"s risk tolerance/ financial scenario change determined by changes to the user data; and providing the revised financial management plan to the user. Referencing Figure 5. No. of Pages : 21 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26886

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021024412 A (19) INDIA (22) Date of filing of Application :10/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A NOVEL TECHNIQUE FOR ALLOCATION OF RESOURCE AND MANAGEMENT OF IOT GATEWAY FOR WIRELESS SYSTEM

(71)Name of Applicant : 1)Mr.K.Vengatesan, Sanjivani College of Engineering Address of Applicant :Sanjivani College of Engineering, Kopargaon, Ahmednagar, Maharashtra, India. Maharashtra India 2)Mr.G Madhukar Rao, Koneru Laxmaiah Education Foundation 3)Dr S Nikkath Bushra, St.Joseph™s Institute of :H04W Technology (51) International classification 16/00 4)Mr.M.Chithambarathanu ,Vignans Foundation for (31) Priority Document No :NA Science and Technology Research (32) Priority Date :NA 5)Mr.T.Akilan, Galgotias College of Engineering and (33) Name of priority country :NA Technology (86) International Application No :NA 6)Dr N Janaki Manohar, Sri Venkateswaraa College of Filing Date :NA Technology (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Mr.K.Vengatesan, Sanjivani College of Engineering Filing Date :NA 2)Mr.G Madhukar Rao, Koneru Laxmaiah Education (62) Divisional to Application Number :NA Foundation Filing Date :NA 3)Dr S Nikkath Bushra, St.Joseph™s Institute of

Technology 4)Mr.M.Chithambarathanu ,Vignans Foundation for Science and Technology Research 5)Mr.T.Akilan, Galgotias College of Engineering and Technology 6)Dr N Janaki Manohar, Sri Venkateswaraa College of Technology

(57) Abstract : ABSTRACT Rapid momentum is gained by Internet of Things (IoT) in the field of telecommunications. Exchange of data and interactivity is allowed by conventional networks but does not support functions and features required for the operation of the Internet of Things. Hence a novel technique is proposed in this invention whose design is such that resources that are in common can be shared between objects such as various types of smart systems accessing same set of source on sharing. The architecture of IoT network is proposed such that it can be managed in a centralized control based on Artificial Intelligence (AI). The algorithm utilized by controller of Artificial Intelligence is based on the technique of machine learning which collects data using the information protocol from the network. Whenever a smart system gets connected with the network, a protocol message is announced called as Function and Service Discovery Protocol via the protocol of message telemetry transport in a queued fashion. Discovering of various resources allotted in the network is the main aim of the proposed algorithm. Results obtained shows that efficiency of the system outperforms conventional systems in the field of communication in integrating IoT devices. No. of Pages : 12 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26887

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021024591 A (19) INDIA (22) Date of filing of Application :11/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : WEARABLE GARMENT OR ITEMS WITH PROVISION TO ATTACH CONTAINER TO CARRY DRINKING LIQUID

(51) International classification :F01N3/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Gulechha Lokesh N (32) Priority Date :NA Address of Applicant :8, MAHAVIR MARKET, PHALTAN (33) Name of priority country :NA GALLI, SOLAPUR-413002, MAHARASHTRA, INDIA (86) International Application No :NA Maharashtra India Filing Date :NA 2)Gulechha Komal Lokesh (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Gulechha Komal Lokesh Filing Date :NA 2)Gulechha Lokesh N

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Present Invention provides individual with a garment or wearable items using 2 layers of formation with container (5) for carrying drinking liquid which can be easily attached/interchangeable on the garment (1). This arrangement offers multiple usage of drinking and novelty to the individual. This methods of formation of garment provides freedom to the individual in select any garment (1) design to be connected to any container (5) design which complements each other. No. of Pages : 15 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26888

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021024876 A (19) INDIA (22) Date of filing of Application :13/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN ANTI-CONTAMINATION PROTECTIVE JACKET

(51) International classification :A41D2300/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Pankaj Kumar Jha (32) Priority Date :NA Address of Applicant :108 Jamaica, Nahar Amrit Shakti, (33) Name of priority country :NA Chandivali, Sakinaka, Mumbai 400072 Maharashtra India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Pankaj Kumar Jha

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An anti-contamination jacket system for providing anti-contamination protective clothing for a user™s torso, hands, wrist, arms, head, face including neck, said jacket system comprising of elasticated waistband for better grip along the torso section, a neck hole comprising of a hood attached to it with embedded flexible face shield and an extended neck convertible into a mask with a zipper, an extra cloth is attached to the inner lining to replace the extended neckline and an elasticated band sewed on mask and hoodie, a name tag attachment, slit for inward pockets secured with a zipper on either side, sleeves comprising of convertible wrist cuff cloth with zipper into gloves sealed at the wrist with an elasticated band. Referencing Figure 4. No. of Pages : 20 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26889

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021025300 A (19) INDIA (22) Date of filing of Application :16/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN APPARATUS FOR SANITIZATION AND PASTEURIZATION OF EGGS

9)Kailash Kumar (51) International classification :F16D3/00 10)Girish H (31) Priority Document No :NA 11)Abhra Pratip Ray (32) Priority Date :NA 12)Ritesh Dhanare (33) Name of priority country :NA 13)Ajay Kumar Naik Guguloth (86) International Application No :NA 14)Pranav Chippalkatti Filing Date :NA 15)Syed Mufassir Yaseen (87) International Publication No : NA 16)D.D. Chandra Prakash (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)Pravin R. Kshirsagar (62) Divisional to Application Number :NA 2)Awab Habib Fakih Filing Date :NA 3)Neeraj Chandnani 4)K. Vijay Kumar 5)T. C. Manjunath 6)Anita Shamrao Walde 7)Ranjana 8)S.P. Anandaraj 9)Kailash Kumar 10)Girish H 11)Abhra Pratip Ray 12)Ritesh Dhanare 13)Ajay Kumar Naik Guguloth 14)Pranav Chippalkatti 15)Syed Mufassir Yaseen 16)D.D. Chandra Prakash

(57) Abstract : The present invention relates to an apparatus for sanitization and pasteurization of eggs. The proposed invention comprises of one UV chamber (101), hot water chamber (102) and cold water chamber (102). Wherein eggs are initially passed through ultra violet chamber (101) which having multiple UV lights (111) on its wall for disinfecting the eggs, thereafter eggs are processed for pasteurization through hot water having temperature 60oC for about 3 min. and passing in continuation through cold water of 70C temp. for about 3 min. Thus the proposed invention provides hygienic and non- contaminated eggs which safe for human consumption. Following invention described in detail with the help of figure 1 of sheet 1 which shows schematic diagram of the proposed apparatus. No. of Pages : 12 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26890

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021025367 A (19) INDIA (22) Date of filing of Application :16/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SMART WASHROOM SYSTEM

(71)Name of Applicant : 1)Dr. Chandraprakash Shivram Padmavat Address of Applicant :I / C Director, International Center of Excellence in Engineering and Management ICEEM, Aurangabad Maharashtra India 2)Dr. Shabnam Farook Sayyad 3)Dr. Farook Bashir Sayyad

4)Prof. Vaibhav P Kulkarni :H04W (51) International classification 5)Dr. Preeti Suryakant Patil 21/00 6)Prof. Shivaprasad Sakharam More (31) Priority Document No :NA 7)Prof. Priyanka Shivaprasad More (32) Priority Date :NA 8)Mr. Ishan Yogesh Dadape (33) Name of priority country :NA 9)Mr. Om Suryakant Patil (86) International Application No :NA 10)Ms. Maitri Dinesh Patil Filing Date :NA 11)Dr. Suryakant Babanrao Patil (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Dr. Chandraprakash Shivram Padmavat Filing Date :NA 2)Dr. Shabnam Farook Sayyad (62) Divisional to Application Number :NA 3)Dr. Farook Bashir Sayyad Filing Date :NA 4)Prof. Vaibhav P Kulkarni 5)Dr. Preeti Suryakant Patil 6)Prof. Shivaprasad Sakharam More 7)Prof. Priyanka Shivaprasad More 8)Mr. Ishan Yogesh Dadape 9)Mr. Om Suryakant Patil 10)Ms. Maitri Dinesh Patil 11)Dr. Suryakant Babanrao Patil

(57) Abstract : A smart washroom system includes a camera fitted at front side of door of a washroom, wherein the camera is configured to detect number of persons based on face recognition technique; a proximity sensor to determine if a user is close to the door of the washroom; a counting circuitry to determine the frequency of opening of the door of the washroom; a sound detecting unit means fitted inside the washroom to detect if sound goes beyond a threshold level and detecting predefined list of words including HELP, SAVE, and wherein if an infant is detected in hands of an adult by said camera, a trigger is sent to a processing unit, wherein said processing unit locks the door until the adult user is authorized; an authorization unit wherein the adult user is allowed input the biometric details of infant, adult user for authentication, and wherein the adult user and infant are allowed access to the washroom only after successful authentication; and an object counter fitted at the front side of the door of the washroom, wherein the object counter adapted to count inflow and outflow of the person from the washroom door, if the count of inflow is greater than count of outflow of person that means a person is present inside the washroom from a long time then the object counter sends signal to the processing unit and locks the door of washroom. No. of Pages : 21 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26891

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021025565 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS FOR PRODUCTION OF NOVEL ACID YELLOW DYES

(51) International classification :C09B29/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Modi Bhavya Rameshchandra (32) Priority Date :NA Address of Applicant :5, Nilamkunj Society, Mira Cinema (33) Name of priority country :NA BRTS Cross Road, Maninagar, Ahmedabad - 380028 Gujarat, (86) International Application No :NA India. Gujarat India Filing Date :NA 2)Modi Jigna Bhavya (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Modi Bhavya Rameshchandra Filing Date :NA 2)Modi Jigna Bhavya

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Process for production of novel acid yellow dyes The process for production of novel acid yellow dyes involves production of two new molecules of acid yellow dyes which display increased light fastness and can be applied on various substrates like wool, silk, nylon 6, nylon 6,6 and polyamide fibers in weak acid conditions. This process involves mainly three stages. In the first stage a green yellow toned dye (Fig. 1) is prepared. In the second stage the first molecule of the novel acid yellow dye (Fig. 2) is prepared from the green yellow toned dye by metalizing it. In the third stage the green yellow toned dye and the first novel acid yellow dye powders are mixed with other ingredients to produce the second molecule of the novel acid yellow dye (Fig. 3). Figs. 2 and 3 No. of Pages : 24 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26892

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021025618 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : LIQUID CIRCULATION-DAMPING BASED THERMAL ENERGY EXCHANGER FOR ABSORPTION, DISSIPATION, CONTROL OF THERMAL ENERGY FROM FLUID

(71)Name of Applicant : 1)TRILOK DATTAJIRAO SAWANT Address of Applicant :A-2, AJINKYATARA SOCIETY SINGH ESTATE, CROSS ROAD NO. 1, SAMATA NAGAR (51) International classification :F01N3/00 KANDIVALI (E), MUMBAI-400 101, MAHARASHTRA, (31) Priority Document No :NA INDIA. Maharashtra India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)TRILOK DATTAJIRAO SAWANT (86) International Application No :NA 2)AAKASH ASHOK SALUNKE Filing Date :NA 3)JAYESH PRALHAD KEDAR (87) International Publication No : NA 4)ASHLEY SAMKUTTY (61) Patent of Addition to Application Number :NA 5)VIBHAV UMESH SAWANT Filing Date :NA 6)MANISHA SURESH MANE (62) Divisional to Application Number :NA 7)PIYUSH GOPINATH TARE Filing Date :NA 8)OMKAR SANTOSH KULKARNI

9)SAURABH TANAJI MANE 10)KRISHNA HIMAT CHAVDA 11)SIDDHARTH SUHAS PARKAR 12)VINITA MANISH RANE

(57) Abstract : ABSTRACT The condensers are basically devices that are used as heat exchanger units to change a certain state of matter which is largely from the gaseous state to the liquid state or vice versa. But these units are not so efficient at high temperature fluids and lack various parametric factors which are covered in the proposed invention. The group of inventors has successfully researched and made a more efficient system that can extract and dissipate heat more efficiently and can be used to change a state of matter from one form to the other. It uses the 4-stage fluid circulation damping technology that has been specially introduced for heat or thermal power exchanger or dissipation and control. Due to the inbuilt systems and easy user interface it is also possible to monitor the changes at various stages. No. of Pages : 16 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26893

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021025621 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : INTRODUCING SENSOR MAPPING TECHNOLOGY FOR RESPIRATORY SUPPORT SYSTEM TO REPLACE PRESSURE SENSORS AND AIRFLOW SENSORS WITH SENSOR MAPPING TECHNOLOGY

:H04W (71)Name of Applicant : (51) International classification 16/00 1)TRILOK DATTAJIRAO SAWANT (31) Priority Document No :NA Address of Applicant :A-2, AJINKYATARA SOCIETY (32) Priority Date :NA SINGH ESTATE, CROSS ROAD NO. 1, SAMATA NAGAR (33) Name of priority country :NA KANDIVALI (E), MUMBAI-400 101, MAHARASHTRA, (86) International Application No :NA INDIA. Maharashtra India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)TRILOK DATTAJIRAO SAWANT (61) Patent of Addition to Application Number :NA 2)AAKASH ASHOK SALUNKE Filing Date :NA 3)ABHISHEK CHANDRASHEKAR SALIAN (62) Divisional to Application Number :NA 4)VRAJ HITESH PARIKH

Filing Date :NA

(57) Abstract : ABSTRACT The ideal control system uses a variable amount of sensors for the accurate analysis of he environnment depending on the actuator output to vary the control parameters. The control system invented is designed to eliminate the sensors in closed loop systems where the external parameters are fixed or the result through actuators is foreseen to replace them with others methods such as formula method and n-point selection method. To understand the implication of the system and its advantages this design is applied to the advanced and automated respiration support system which are commonly referred to as the ventilators. In advanced respiration .support systems therere various sensors used such as the pressure sensor, the air flow measurement sensors and so on but the application of these sensors increases the complexity of the system and the cost of the complete system. To minimise the disadvantages mentioned, the following system has been implemented successfully. No. of Pages : 17 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26894

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021025627 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SYSTEM AND METHOD FOR ENABLING GESTURE BASED COMMUNICATION FOR DIFFERENTLY ABLED INDIVIDUALS

(71)Name of Applicant : :H04W 1)ARCHANA SANTOSH GHOTKAR (51) International classification 21/00 Address of Applicant :Survey No. 32/4, Venkateshwara (31) Priority Document No :NA Homes, Row House No 05, Behind Bharati Vidyapeeth, In front (32) Priority Date :NA of Ganesh Supermarket, Ambegaon (BK), Pune - 411046, (33) Name of priority country :NA Maharashtra, India. Maharashtra India (86) International Application No :NA 2)SHEETAL SONAWANE Filing Date :NA 3)PUJASHREE S. VIDAP (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)ARCHANA SANTOSH GHOTKAR Filing Date :NA 2)SHEETAL SONAWANE (62) Divisional to Application Number :NA 3)PUJASHREE S. VIDAP Filing Date :NA 4)UDIT BARDE

5)GAJANAN K. KHARATE

(57) Abstract : The present disclosure relates to a system (100) and method (300) for translating an input gesture associated with a first sign language to a target gesture associated with a second sign language for enabling gesture based communication between a plurality of users. The system comprises one or more server computers (112) having at least one processor (202) to parse an input video including an input gesture made by a first user (102) in the first sign language to obtain a plurality of images that may be processed to obtain a body segmentation data and a hand segmentation data, based on which a first translated sign notation may be generated, and further converted to a second translated sign notation corresponding to the target gesture associated with the second sign language, which may be displayed such that the target gesture may be understandable by a second user (106). No. of Pages : 32 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26895

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021025831 A (19) INDIA (22) Date of filing of Application :19/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SOLAR PANEL CLEANING SPRINKLER WITH BUILT-IN CLAMP AND PIPE HOLDER

(51) International classification :A01G25/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Aditi Bansod (32) Priority Date :NA Address of Applicant :28, Public Society, Atrey Layout, (33) Name of priority country :NA Pratap Nagar, Nagpur Maharashtra India (86) International Application No :NA 2)Ameya Bansod Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)Ameya Bansod (61) Patent of Addition to Application Number :NA 2)Aditi Bansod

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A novel Sprinkler is designed which is to be used for cleaning of Solar Panels. The Sprinkler comprises of unique Spray Nozzle, a clip-on clamp and pipe holder all in one unit. A single sprinkler cleans multiple panel and also utilizes less water or cleaning liquid due to its spraying pattern. These sprinklers can form a set of system which provides automatic cleaning for Solar Plants in a very inexpensive way. No. of Pages : 12 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26896

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021025834 A (19) INDIA (22) Date of filing of Application :19/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A DEVICE AND METHOD FOR PREPARATION OF ALKALINE WATER

(51) International classification :F01N3/00 (71)Name of Applicant : (31) Priority Document No :NA 1)HITESH BHUNDIYA (32) Priority Date :NA Address of Applicant :SHRI SWAMINARAYAN GURUKUL (33) Name of priority country :NA VIDYALAYA, DHEBAR ROAD, RAJKOT - 360002, (86) International Application No :NA GUJARAT, INDIA. Gujarat India Filing Date :NA 2)AMI BHUNDIYA (87) International Publication No : NA 3)DEEP BHUNDIYA (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)HITESH BHUNDIYA (62) Divisional to Application Number :NA 2)AMI BHUNDIYA Filing Date :NA 3)DEEP BHUNDIYA

(57) Abstract : ABSTRACT OF THE INVENTION The present invention related to adevice for preparation of alkaline water comprising, a cartridge, a first container for holding water to pass through the cartridge, and a second container for holding water passed from the cartridge, wherein the cartridge comprises of plurality of layers configured to filter the water and increase alkalinity of the water and method to prepare alkaline water with the help of the cartridge. No. of Pages : 29 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26897

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021025844 A (19) INDIA (22) Date of filing of Application :19/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : VEHICLE SECURITY AND OVER SPEED MONITORING SYSTEM

(71)Name of Applicant : 1)MR. ANIKET A. NAVGHARE

Address of Applicant :PLOT NO. 53, BALAJI NAGAR, :G06F (51) International classification JAYHIND SOCIETY, DABHA WADI, NAGPUR - 440023, 19/00 MAHARASHTRA, INDIA. Maharashtra India (31) Priority Document No :NA 2)PRASHANT UMAJI MAHURE (32) Priority Date :NA 3)MAYUR VINOD RANGARI (33) Name of priority country :NA 4)VRUSHALI RAJENDRA KOLTE (86) International Application No :NA 5)DR. ROSHANI RAUT Filing Date :NA 6)MS. ANUJA RAJENDRA JADHAV (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)MR. ANIKET A. NAVGHARE Filing Date :NA 2)PRASHANT UMAJI MAHURE (62) Divisional to Application Number :NA 3)MAYUR VINOD RANGARI Filing Date :NA 4)VRUSHALI RAJENDRA KOLTE 5)DR. ROSHANI RAUT 6)MS. ANUJA RAJENDRA JADHAV

(57) Abstract : Abstract Present invention is related to the vehicle over speed monitoring system. The object is to provide an IOT based system to detect over speed of the particular two wheeler. If the driver is in over speed, the system passes the current speed of the vehicle to the nearby RTO along with location. The registered vehicle/driver will be charged a fine along with details of over speed driving. The system also detects explosive material using a sensor like thermodynamics and conductance and alert will be sent to nearby police station/RTO. For the security of the vehicle system has finger print device for ignition of the vehicle. No. of Pages : 11 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26898

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026010 A (19) INDIA (22) Date of filing of Application :19/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ATM BASED DENOMINATION CONVERSION MACHINE.

(51) International classification :H01L21/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Priyanka Vinod Kanoi (32) Priority Date :NA Address of Applicant :Priyanka Vinod Kanoi residing at Dist- (33) Name of priority country :NA Yavatmal 445001, Maharashtra, India; an Indian National. (86) International Application No :NA Maharashtra India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)Priyanka Vinod Kanoi

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The main objective or purpose of this idea/invention is we want to reduce the time people spent in search of currency notes of lower or higher denomination in exchange of an equal amount of currency notes provided by them. This will ensure better cash flow as people will have the desired denomination of money to spend on the product. With this invention there will be an effort made in designing of the existing ATM machine to upgrade its functionality to accommodate our idea. People can directly deposit their cash in the cash box (96), select the denomination of money in the display screen (92) and get the desired denomination currency notes. Our ATMS will be upgraded from having four cassettes (91) to six cassette (91) and will be calibrated accordingly to hold lower denomination currency as well. However, this is the generic idea and it can be used and utilised in any other electronic cash dispenser/coin dispenser machines by making few changes in designing. This idea is aimed at increasing the functionality of the existing ATM™s so that setup cost can be minimised. With this, the conclusion can be made that this idea is very beneficial specially in the places where electronic payment is yet to get boon and people have to go in search for currency exchange for getting desired denomination money. No. of Pages : 24 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26899

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026036 A (19) INDIA (22) Date of filing of Application :20/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DESIGN AND WORKING OF A FILTRATION EFFICIENCY TESTER FOR NON-WOVEN MATERIAL USED IN AIR FILTRATION.

(71)Name of Applicant : 1)Mr. Atul J. Dhavale Address of Applicant :DKTE's TEXTILE AND

ENGINEERING INSTITUTE Rajwada, Post Box no. 130, (51) International classification :F16D3/00 Ichalkaranji-416 115, Dist.- Kolhapur Maharashtra , India (31) Priority Document No :NA Maharashtra India (32) Priority Date :NA 2)Dr. Ravindra N. Joshi (33) Name of priority country :NA 3)Dr. P. V. Kadole (86) International Application No :NA 4)Dr. Manjunath C. Burji Filing Date :NA 5)Mr. Vishal R. Balwan (87) International Publication No : NA 6)Miss. Princes M. Dkhar (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)Mr. Atul J. Dhavale (62) Divisional to Application Number :NA 2)Dr. Ravindra N. Joshi Filing Date :NA 3)Dr. P. V. Kadole 4)Dr. Manjunath C. Burji 5)Mr. Vishal R. Balwan 6)Miss. Princes M. Dkhar

(57) Abstract : This invention has a design and method for testing the filtration efficiency of Nonwoven material intended for use in Air Filtration. Here a chamber is designed inside which the filter is placed and it has a circular mixing chamber to mix trash with air which is projected to the filter at a predefined velocity to identify its blocking capacity. The apparatus is made portable so that it can be carried to any place for testing and it is made so compact that it has only 4 major components which makes it cost efficient design. The design and method also facilitates the prediction of the life of the non-woven fabric used for the filtration. No. of Pages : 16 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26900

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026140 A (19) INDIA (22) Date of filing of Application :22/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DESIGN AND WORKING OF A VARYING FORCE MEASURING DEVICE

:H04W (71)Name of Applicant : (51) International classification 16/00 1)Mr. Vijay Ananda Kamble (31) Priority Document No :NA Address of Applicant :Tiranga colony ,Galli -3, Kabnur (32) Priority Date :NA Ichalkaranji Maharashtra India 416115 Maharashtra India (33) Name of priority country :NA 2)Dr. Vasudev Dhondiram Shinde (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Mr. Vijay Ananda Kamble (87) International Publication No : NA 2)Dr. Vasudev Dhondiram Shinde

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT: This invention illustrates a varying force measuring device with deformation measuring gadgets which measure loads. Here the number of elastic members is connected to each other. So when the deformation measuring gadgets are mounted on elastic member surfaces the load is applied to the opposed end regions, and the top elastic member subject to an elastic deformation. An increasing deformation of elastic member increases in turn causes an increasing output from the deformation measuring gadgets. This output is amplified and may be applied through an analogue-to-digital converter to a digital load indicator; or from the amplifier directly to a recorder. The device is made capable to accurately measure the low level loads along with measuring high level loads. No. of Pages : 16 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26901

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026142 A (19) INDIA (22) Date of filing of Application :22/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PORTABLE CONTINUOUS RECLAMATION SYSTEM

(51) International classification :F16D3/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Dr. Vasudev Dhondiram Shinde (32) Priority Date :NA Address of Applicant :C-51, Laxmi Vyankatesh Nagar, Old (33) Name of priority country :NA Chandur Road,Ichalkaranji Maharashtra India 416115 (86) International Application No :NA Maharashtra India Filing Date :NA 2)Mr. Suyog Bapuso Rayjadhav (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Dr. Vasudev Dhondiram Shinde Filing Date :NA 2)Mr. Suyog Bapuso Rayjadhav

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT The invention relates to development of an energy efficient portable continuous reclamation system for foundry, construction and similar sectors where fresh sand is required. This system generally works on thermal treatment. Developed system consists of insulated bubbling sand heater, bubbling sand cooler with thrust gate provision which results in energy efficient and cost effective system. Stream pressuriser is helps to provide pressurized fluid to nozzle magazines via bottom gates. As a result sand particle coat becomes brittle and coating of sand removed. In this system because of bubbling, sand grains becomes circular in shape during reclamation process which gives better molding properties to reuse. This system is useful for both green and no bake sand processing. As this system consists of specially designed nozzle magazines and thrust ports so efficiency and production rate of system is increased. This system is cost effective and movable from one place to other place. No. of Pages : 16 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26902

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026143 A (19) INDIA (22) Date of filing of Application :22/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : QUARTER RAM SHAPER MACHINE

(51) International classification :F01N3/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Lumbhani Hiren Ashokbhai (32) Priority Date :NA Address of Applicant :Student of GTU Affiliated College (33) Name of priority country :NA 22/B, Chaitanyadham Society Reliance Petrol Pump Ni Same, (86) International Application No :NA Madhapar, Bhuj-370020 Gujarat, India Gujarat India Filing Date :NA 2)Parmar Riddhesh Vinod (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Lumbhani Hiren Ashokbhai Filing Date :NA 2)Parmar Riddhesh Vinod

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention Quarter Ram Shaper Machine provides four Workpiece Mounting Vice (13) where four workpieces are clamped. After that the worker clamps Single Point Cutting Tool (25) in the Tool Holder (12). After all the primary setup is done for the machining operation the worker will select the machining program depending upon the requirement of the workpiece. The machining program will synchronize the speed for Stepper Motor for Lead Screw (22), Stepper Motor for Pinion (23) and Main Stepper Motor (4). Both the Scotch Yoke Mechanism (6) converts the rotary motion of Eccentric Disc (3) into the reciprocating motion of Ram (7). A Fixed Tool Plate (9) is attached at the end of each Ram (7) provides reciprocating motion to all the four Single Point Cutting Tools (25) which removes the material of the workpiece which is kept ahead of it in its forward stroke. Therefore simultaneously four workpieces can be machined and production time as well as labour cost can also be reduced. No. of Pages : 26 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26903

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026146 A (19) INDIA (22) Date of filing of Application :22/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : IOT BASED SMART PARTICLE PROCESSOR

:G06F (71)Name of Applicant : (51) International classification 16/00 1)Dr. Vasudev Dhondiram Shinde (31) Priority Document No :NA Address of Applicant :C-51, Laxmi Vyankatesh Nagar, Old (32) Priority Date :NA Chandur Road,Ichalkaranji Maharashtra India 416115 (33) Name of priority country :NA Maharashtra India (86) International Application No :NA 2)Mr. Utkarsh Annasaheb Patil Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)Dr. Vasudev Dhondiram Shinde (61) Patent of Addition to Application Number :NA 2)Mr. Utkarsh Annasaheb Patil

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT The invention relates to the IoT Based Smart Particle Processor is used to heating and cooling of any material particles and separate according to size or shape or similarity of properties of material by use of sensors, controlling devices. The controlling Unit helps to operate elements of the invention by receiving, transferring, storing and processing signals from various elements of present invented machine. Particle Heater is used to heat material particle for removing chemical coatings over it or to break chemical bonding over it or to carry out other similar processes. Particle Cooler used for eliminating heat from the hot material particle and Particle Screener used for separation of material particles according to respective properties. The Controlling Unit is element which helps to transfer material particles, cooling media and fluid flow by controlling elements of IoT based smart particle processor. The Controlling Unit receives signal from sensing elements from the invented machine and take action as per requirement. Smart Gadget is electronic device capable to communicate with Controlling Unit wirelessly and able to plot graph, store the data and send commanding signal to the controlling unit. No. of Pages : 10 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26904

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026234 A (19) INDIA (22) Date of filing of Application :22/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN AUTOMATED SYSTEM AND METHOD TO CONTROL TRAFFIC SIGNALS FOR EMERGENCY VEHICLES

(51) International classification :G06F19/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Dr. Ruhi Subhash Bakhare (32) Priority Date :NA Address of Applicant :138-A, Shankarnagar, Nagpur (33) Name of priority country :NA Maharashtra India (86) International Application No :NA 2)Dr. Rakhi Vyankatesh Vyaghra Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)Dr. Ruhi Subhash Bakhare (61) Patent of Addition to Application Number :NA 2)Dr. Rakhi Vyankatesh Vyaghra

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT An Automated System and Method to Control Traffic Signals for Emergency Vehicles An app based traffic management system for providing an uninterrupted passage (green corridor) for two or more vehicles located in an enroute passage comprising: two or more vehicles, each equipped with one or more RFID module (2), one or more RFID module (2) information readers, and a microcontroller (1) including memory storage, said one or more speed and direction sensors and one or more range-sensing devices being connected to said microcontroller; route planning means for generating strategic route plans for said two or more vehicles located in said enroute passage; each vehicle including tracking and monitoring means to track and monitor its global position (15) and orientation in real time in said enroute passage as said two or more vehicles progress along said strategic route plans; and; a central server (9) that executes said route planning and vehicle tracking and monitoring means, said server being connected to said one or more vehicles by way of a wireless data communication system; characterised in that : the route planning means is an app / web (18) based route planning means, and said central server (9) is configured to execute said route planning means using maps of the enroute passage which are generated using data from the one or more sensing devices and sensors; and the vehicle tracking and monitoring means is arranged to monitor in real time the global position and orientation (15) of said two or more vehicles in said enroute passage as said two or more vehicles progress along said strategic route plans; and wherein the said vehicle tracking and monitoring means is configured to identify and communicate with the forthcoming traffic signal vide said wireless data communication system and alter the traffic signal from a prescribed distance for providing a clear passage and again altering the traffic signal after the crossover of the said two or more vehicles. Figure 1 No. of Pages : 21 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26905

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026249 A (19) INDIA (22) Date of filing of Application :22/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN AUTOMATED SYSTEM FOR INTEGRATED HOSPITAL INVENTORY AND WORKFORCE MANAGEMENT AND METHOD THEREOF

:H04W (71)Name of Applicant : (51) International classification 21/00 1)Nirzar Madan Kulkarni (31) Priority Document No :NA Address of Applicant :GAZAL•, Plot no 4, Prashant Nagar, (32) Priority Date :NA Near Ajni Square. Nagpur Maharashtra India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)Nirzar Madan Kulkarni

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT AN AUTIOMATED SYSTEM FOR INTEGRATED HOSPITAL INVENTORY AND WORKFORCE MANAGEMENT AND A METHOD THEREOF 1. An automated system for integrated hospital inventory and workforce management suitable for real-time locating of an inventory or workforce possessing at least one unique RFID tag, comprising of: a plurality of fixed RFID tag information reader(3) including a wireless transmitter located at a plurality of predefined locations configured to generate location data; at least one movable RFID tag (6) attached to said at least one RFID tag information reader, said RFID tag having an externally readable code; an encoder including a wireless receiver (7) for detecting a moving direction and calculating the moved distance of the said movable RFID tag relative to a starting point in real time by using the starting point location data of fixed RFID tag information reader and traversed location data of fixed RFID tag information reader; a recording unit, operably connected with the said encoder configured for recoding the real time position information of the movable RFID device for a particular / prescribed location and obtains the first RFID tag position information acquired by the RFID tag information reader(3,7,41); a plurality of display monitors (2,45) configured for displaying the real time position of the said movable RFID tag as recorded with a time stamp against fixed RFID tag information reader; wherein the said fixed RFID tag information reader (3,7,41) is configured to identify said at least one movable RFID tag(6) by reading said externally readable code corresponding to said RFID tag; and wherein said plurality of fixed RFID tag information reader (3,7,41) are configured to wirelessly transmit said location data from said movable RFID tag to said encoder and a tracking and recording unit according to transmission parameters. Figure 1. No. of Pages : 32 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26906

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026271 A (19) INDIA (22) Date of filing of Application :22/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : USING MINI PISTON ASSEMBLY FOR INCREASING THE VOLUMETRIC EFFICIENCY OF THE ENGINE.

(51) International classification :F16D3/00 (71)Name of Applicant : (31) Priority Document No :NA 1)YASH THAKUR (32) Priority Date :NA Address of Applicant :B-43,44 JABRAN COLONY JUNI (33) Name of priority country :NA INDORE,INDORE Madhya Pradesh India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)YASH THAKUR

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Abstract: The mini piston concept is very low cost method to increase the volumetric efficiency of the engine using mechanically operated mechanism to provide the best compression ratio which helps to burn the fuel and reduces the molecules of um-burn fuel , so increase the indicated thermal , brake thermal efficiency and also reduce the exhaust level and improves the fuel economy of the engine. No. of Pages : 24 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26907

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026379 A (19) INDIA (22) Date of filing of Application :22/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN APPARATUS FOR DISINFECTION OF HOUSEHOLD OBJECTS & MATERIAL AND METHOD THEREOF

(51) International classification :C02F1/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Mr. Vikas Kamlakar Walawalkar (32) Priority Date :NA Address of Applicant :B/501, Beau Monde, Appasaheb (33) Name of priority country :NA Marathe Marg, Prabhadevi, Mumbai “ 400025 (Maharashtra, (86) International Application No :NA India) Maharashtra India Filing Date :NA 2)Dr. Suvarna Netaji Patil (87) International Publication No : NA 3)Dr. Sunil Manohar Nadkarni (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)Mr. Vikas Kamlakar Walawalkar (62) Divisional to Application Number :NA 2)Dr. Suvarna Netaji Patil Filing Date :NA 3)Dr. Sunil Manohar Nadkarni

(57) Abstract : The present invention relates to an apparatus for disinfection of household objects & materials and method thereof. The said apparatus for disinfection comprises a sanitization chamber assembly (100); an Ozone generator assembly (200); a Hydrogen Peroxide mist generator assembly (300); and an electronic control unit (400) characterized by formation of formation of charged hydroxyl radicals on the surface of the specimen from the interaction of Ozone and Hydrogen Peroxide mist. The method of disinfection involves steps of Ozone delivery in the sanitization chamber; followed by Hydrogen Peroxide mist delivery in the sanitization chamber (100); followed by disinfection wherein charged hydroxyl radicals are formed from interaction of Ozone and Hydrogen Peroxide mist and then the exiting Ozone is neutralized in MnO2 filter assembly (106). No. of Pages : 18 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26908

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026557 A (19) INDIA (22) Date of filing of Application :23/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : IDENTIFICATION AND ASSIGNMENT OF PATIENT BEDS IN HOSPITAL ENVIRONMENTS BY BUBBLE AND CLUSTER SORTING TECHNIQUES

:G06F (71)Name of Applicant : (51) International classification 19/00 1)Dhananjay Tukaram Mandlik (31) Priority Document No :NA Address of Applicant :S7/6, Shrikanth View Society, Next to (32) Priority Date :NA Sai Siddhi Chowk, Ambegaon Pathar, Pune, Maharashtra, 411046 (33) Name of priority country :NA Maharashtra India (86) International Application No :NA 2)Parag Chandrakant Kalkar Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)Dhananjay Tukaram Mandlik (61) Patent of Addition to Application Number :NA 2)Parag Chandrakant Kalkar

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention provides a computer implemented system and method for selecting a most-suitable bed for a patient from a plurality of beds. The system and method of the invention are directed to assignment of the patient beds to patients based on the factors as identifying the ailment of the patient, detecting the severity of the ailment, availability of specialist doctors, availability of support staff trained for the specific ailment, availability of patient bed in a specific section of the hospital, assignment of bed. The system and method are guided by evaluation of the schedule of the relevant specialists, and other support staffs by using a sorting technique, preferably bubble sorting technique. No. of Pages : 16 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26909

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026597 A (19) INDIA (22) Date of filing of Application :23/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : MAGNETIC PERMEABLE CEMENT/CONCRETE FOR OPTIMUM ELECTROMAGNETIC RADIATION

:H04W (71)Name of Applicant : (51) International classification 21/00 1)Virenkumar K. Vasava (Beneficiary of GTU IP Filing (31) Priority Document No :NA Scheme) (32) Priority Date :NA Address of Applicant :120,Mahaveer Dham society section-1, (33) Name of priority country :NA New kosad road, Amroli, Surat-394107, Gujarat, India Gujarat (86) International Application No :NA India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)Virenkumar K. Vasava (Beneficiary of GTU IP Filing (61) Patent of Addition to Application Number :NA Scheme)

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a magnetic cement/concrete for optimum electromagnetic radiation permeability. Magnetic cement/concrete is a magnetic permeable concrete. The magnetic concrete for optimum electromagnetic radiation permeability includes ferrimagnetic agent, and other additional agents. The present invention has utility for providing optimum electromagnetic signals in mobile, Wi-Fi or any other devices in which electromagnetic radiation is used to the areas where electromagnetic radiations are not able to penetrate and such condition creates a situation of lack of communication. It also has utility for inspecting structure reinforcement. No. of Pages : 24 No. of Claims : 12

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26910

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026651 A (19) INDIA (22) Date of filing of Application :24/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SWITCH BOARD

:H01L (71)Name of Applicant : (51) International classification 31/00 1)Patel Hitenkumar Virabhai (31) Priority Document No :NA Address of Applicant :16, Umiyanagar Society Ganeshpura (32) Priority Date :NA Palanpur-385001 Gujarat, India Gujarat India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)Patel Hitenkumar Virabhai Filing Date :NA 2)Parmar Naileshbhai Nagjibhai (87) International Publication No : NA 3)Nai Dhavalbhai Prakashbhai (61) Patent of Addition to Application Number :NA 4)Patel Jil Satishbhai Filing Date :NA 5)Manasiya Wasim MahammadRizwan (62) Divisional to Application Number :NA 6)Patel Brijeshkumar Mukundbhai

Filing Date :NA

(57) Abstract : Present invention Switch Board works as switchboard as well as wallpaper, which can be hanged on the wall of home/office, and it provides a good aesthetic look of switch board. If the user touches on the different picture/part of the wallpaper, connected electrical appliances will be "ON", touch again on the same respective picture/part, so as to turn "OFF" the said connected appliance. Present invention provides LED based wallpaper panel by which user can easily operate switch board in the dark and which also functions as dim light during night. The present invention shows power consumption by switch board and each electronic appliance on mobile app and user can set the energy consumption limit of said electronic appliance and Switch Board by smart phone application. Present invention also provides protection to appliance against overloading/short-circuit condition/over voltage, shockproof and it requires less space. No. of Pages : 15 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26911

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026698 A (19) INDIA (22) Date of filing of Application :24/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A METHOD FOR PRESERVATION OF MEAT AND MEAT PRODUCTS THEREOF.

:A23L (71)Name of Applicant : (51) International classification 11/00 1)DR. RAJESH CHANDRAKANT PATIL (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF (32) Priority Date :NA MICROBIOLOGY, BHAVANS COLLEGE, ANDHERI (33) Name of priority country :NA (WEST), MUMBAI-58, MAHARASHTRA, INDIA. Maharashtra (86) International Application No :NA India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)DR. RAJESH CHANDRAKANT PATIL (61) Patent of Addition to Application Number :NA 2)DHANASHREE BHELOSE Filing Date :NA 3)KRUTIKA RAJESH PATIL

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Abstract Title; A method for preparation of beef chunks with long shelf life In of the aspect of the invention it is provided that beef chunks were prepared without addition of any preservative and flavours. The preparing technique did not affect the nutritive value of the product. Beef chunks thus prepared irradiated with the radioactive radiation in particular with gamma radiation provided ensured that the microbial contamination could be limited and improved the shelf life of the product. No. of Pages : 14 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26912

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026804 A (19) INDIA (22) Date of filing of Application :24/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : IMPROVED PROCESS FOR THE PRODUCTION OF SOLVENT BLACK 27 DYE

(51) International classification :C09D11/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Modi Bhavya Rameshchandra (32) Priority Date :NA Address of Applicant :5, Nilamkunj Society, Mira Cinema (33) Name of priority country :NA BRTS Cross Road, Maninagar, Ahmedabad - 380028 Gujarat, (86) International Application No :NA India. Gujarat India Filing Date :NA 2)Modi Jigna Bhavya (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Modi Bhavya Rameshchandra Filing Date :NA 2)Modi Jigna Bhavya

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Improved process for the production of Solvent Black 27 dye The main feature of the improved process for production of solvent black 27 dye is that the harmful hexavalent chromium is eliminated in the wastewater generated during the dye production by replacing sodium dichromate dihydrate with basic chromium sulphate. The Solvent Black 27 dye produced using the improved process has the same chemical constituent, structure and properties (Fig. 5) as the dye produced by the conventional method. Moreover the COD and TDS load of the wastewater generated is lower, causing lesser environmental pollution. The improved process for the production of Solvent Black 27 dye is also cost-effective. Fig. 5 No. of Pages : 29 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26913

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026829 A (19) INDIA (22) Date of filing of Application :24/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A MODIFIED ORGAN BATH

(51) International classification :G06T7/00 (71)Name of Applicant : (31) Priority Document No :NA 1)MITHAIWALA IDRIS (32) Priority Date :NA Address of Applicant :Sakina manzil, Beside jamali apartment, (33) Name of priority country :NA Vohravad, Godhra, Gujarat Gujarat India (86) International Application No :NA 2)SUTHAR HETAL Filing Date :NA 3)JAMBUGHODAWALA SAKINA (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)SUTHAR HETAL Filing Date :NA 2)MITHAIWALA IDRIS (62) Divisional to Application Number :NA 3)JAMBUGHODAWALA SAKINA

Filing Date :NA

(57) Abstract : ABSTRACT A MODIFIED ORGAN BATH The present invention relates to a modified organ bath which having image processing tools and improved tissue chamber. The modified organ bath having the water bath (1) having physiological salt solution tank (4) and isolated tissue chamber (5). The heater provided at the downstream of the water bath (1) for convey the heat to the solution of the physiological salt solution tank (4). The tissue placed in the tissue holder mounted in the isolated tissue chamber (5). The necessary oxygen to the tissue provided by the electrical component compartment (10) which is further passed by the aeration inlet pipe (53) to the tissue chamber. To capture the image of the tissue for the purpose of the further image processing, the digital imaging microscopic camera (7) with the periphery light (8) for the clear images hooked up on the camera stand (9). Fig. 1 No. of Pages : 25 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26914

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026855 A (19) INDIA (22) Date of filing of Application :25/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHANOL OR ANY OTHER ALCOHOL DOSING SYSTEM FOR SIMULTANEOUS ENZYMATIC ESTERIFICATION AND TRANSESTERIFICATION

:C08C (71)Name of Applicant : (51) International classification 21/00 1)Vijay Karadbhajne (31) Priority Document No :NA Address of Applicant :Head, Department of Oil Technology, (32) Priority Date :NA LIT, RTM Nagpur University, Nagpur Maharashtra India (33) Name of priority country :NA 2)Atul Vinayakrao Amgaonkar (86) International Application No :NA 3)Latika Atul Amgaonkar Filing Date :NA 4)Madhura Bhalerao (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Vijay Karadbhajne Filing Date :NA 2)Atul Vinayakrao Amgaonkar (62) Divisional to Application Number :NA 3)Latika Atul Amgaonkar Filing Date :NA 4)Madhura Bhalerao

(57) Abstract : The present invention relates to a methanol dosing system for simultaneous enzymatic esterification and transesterification. The object of the proposed invention is to provide a stoichiometric continuous dosing of methanol which enhances the performance of enzyme for commercial production of methyl ester/biodiesel. Due to continuous and automatic methanol addition the concentration of methanol increases gradually which does not affect the activity of enzyme and become freshly available for reacting with fatty acids. The proposed technique gives maximized conversion, rate of reaction also increases linearly stating minimal chances of reversibility of reaction. Following invention is described in detail with the help of Figure 1 of sheet 1 showing a proposed dosing system for enzymatic esterification process. No. of Pages : 10 No. of Claims : 1

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26915

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026856 A (19) INDIA (22) Date of filing of Application :25/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A CLOUD COMPUTING BASED SYSTEM FOR REMOTE SURVEILLANCE OF HAZARDOUS ACTIVITIES

(71)Name of Applicant : 1)Pravin R. Kshirsagar Address of Applicant :Professor & Head-Electronics & Communication Engineering, AVN Institute of Engineering & Technology, Hyderbad, Behind Bank of India, Ayachit Mandir Road, Mahal, Nagpur(M.S.)-440032 Maharashtra India 2)J. Ramkumar 3)M. Sirish Kumar 4)Sheik Saidhbi 5)A. Basi Reddy 6)Srinivasulu Sirisala 7)G. Rajeswarappa 8)L. Lakshmaiah :G06F 9)K. Manoj Kumar (51) International classification 16/00 10)Priyabrata Sahu (31) Priority Document No :NA 11)Ashish Sheshrao Bhaisare (32) Priority Date :NA 12)P. Sherubha (33) Name of priority country :NA 13)S.P. Sasi Rekha (86) International Application No :NA 14)T. C. Manjunath Filing Date :NA 15)Kailash Kumar (87) International Publication No : NA 16)S. Shanmugam (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)Pravin R. Kshirsagar (62) Divisional to Application Number :NA 2)J. Ramkumar Filing Date :NA 3)M. Sirish Kumar

4)Sheik Saidhbi 5)A. Basi Reddy 6)Srinivasulu Sirisala 7)G. Rajeswarappa 8)L. Lakshmaiah 9)K. Manoj Kumar 10)Priyabrata Sahu 11)Ashish Sheshrao Bhaisare 12)P. Sherubha 13)S.P. Sasi Rekha 14)T. C. Manjunath 15)Kailash Kumar 16)S. Shanmugam

(57) Abstract : The present invention relates to a cloud computing based system for remote surveillance of hazardous activities. The proposed invention comprises of multiples sensors (100) which configured at different locations in the premises with a communication module (103), and the said communication module (103) communicates the sensors data and information. Wherein a control unit (102) and a user input unit (101) is adapted for processing of the information, with the help of proposed system user can remotely control the activity based on information received. Following invention described in details with the help of figure 1 of sheet 1 which shows system flow chart of proposed invention. No. of Pages : 13 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26916

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026968 A (19) INDIA (22) Date of filing of Application :25/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A WATER LUBRICATED SILICON CARBIDE THRUST BEARING FOR SUBMERSIBLE PUMP AND MOTOR

(51) International classification :F16D3/00 (71)Name of Applicant : (31) Priority Document No :NA 1)SHRI ALKA INDUSTRIES (32) Priority Date :NA Address of Applicant :SR NO-532/6 P1 & P2, Opp. GEB Sub (33) Name of priority country :NA Station, Mehsana Highway Road, Khanusa Ta.- Vijapur, Dist.: (86) International Application No :NA Mehsana 382870 Gujarat, India. Gujarat India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)PATEL KANJIBHAI ISHVARBHAI

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Abstract A WATER LUBRICATED SILICON CARBIDE THRUST BEARING FOR SUBMERSIBLE PUMP AND MOTOR The present invention relates to water lubricated silicon carbide thrust bearing (1) comprises plurality of silicon carbide tilting segments (2) arranged on the thrust bearing base (3) includes cage (s) formed around by L shaped protuberances (16) near to the central shaft hole (17) and supporting segments (18) on the periphery of the thrust bearing base (3) to accommodate the tilting segments (2). The tilting segments (2) have a pivot (9) formed on its base and are configured with gripper grooves (8) which are incorporated with fastening means (4) on its both sides and also involves formation of micro pits (11) and water path (13) formed on the top surface of tilting segment (5) thereof. The whole arrangement is mounted in water filled cage taking care of contaminated water interrupting from surroundings as both stationary segments and rotating thrust plate contact area are made of silicon carbide. No. of Pages : 27 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26917

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026986 A (19) INDIA (22) Date of filing of Application :25/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DELIVERY SYSTEM FOR SELF EXPANDING STENTS

:A61B (71)Name of Applicant : (51) International classification 17/00 1)Meril Life Sciences Pvt. Ltd. (31) Priority Document No :NA Address of Applicant :Survey No. 135/139 Bilakhia House, (32) Priority Date :NA Muktanand Marg, Chala, Vapi- 396191, Gujarat Gujarat India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)MINOCHA, Dr. Pramod Kumar Filing Date :NA 2)KOTHWALA, Deveshkumar Mahendralal (87) International Publication No : NA 3)MIRZA, Zahidbeg Anisbeg

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A delivery system (100) is disclosed. The delivery system (100) includes an inner tube (30) including a proximal end (3b™) and a distal end (3a™). The inner tube (30) includes at least one stent (30) mounted towards the distal end (3a™). The delivery system further (100) includes an outer sheath (20) and a handle kit (10). The outer sheath (20) is co-axially placed over the inner tube (30). The outer sheath (20) is capable of relative movement with respect to the inner tube (30). The handle kit (10) coupled to the proximal end (3b™) of the inner tube (30). The handle kit (10) further includes at least one loop (12) having a lumen, a guide tube (12a) placed within the lumen of the loop (12) and a roller (14) being operatively coupled to the outer sheath (20). The guide tube (12a) houses the outer sheath (20) when the outer sheath (20) is placed inside the loop (12a). The roller (14) is capable of rotating in at least one of a clockwise or an anti-clockwise direction at a time. In the initial position, the outer sheath (20) is placed over the inner tube (30) carrying the at least one stent (30a) and on application of a pull force by the roller (14), the outer sheath (20) is pulled inside the guide tube (12a) thereby expanding the stent (30a) for delivery. FIG. 1 No. of Pages : 28 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26918

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021026987 A (19) INDIA (22) Date of filing of Application :25/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CLOT RETRIEVAL DEVICE

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A clot retrieval device (1) having an end region (100) and a working region (200) is disclosed. The end region (100) further includes a plurality of tangential struts (110) and curved struts (105). Each tangential strut (110) extends from an edge of a respective curved strut (105). The working region (200) is placed adjacent to the end region (100). The working region (200) includes a plurality of small-sized cells (220) and large-sized cells (225). The small-sized cells (220) and large-sized cells (225) form a reticulated structure. The large-sized cell (225) includes an area multiple times than the small-sized cell (220). The rows of small-sized cells (220) are placed at an offset with each other creating a tread like pattern. FIG. 1 No. of Pages : 35 No. of Claims : 24

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26919

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021027131 A (19) INDIA (22) Date of filing of Application :26/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A LIPOSOMAL COMPOSITION OF PTEROCARPUS SANTALINUS AND THE PROCESS THEREOF•

:A61K (71)Name of Applicant : (51) International classification 31/00 1)ROHAN SHARADANAND PHATAK (31) Priority Document No :NA Address of Applicant :Krishna Institute of Medical Sciences, (32) Priority Date :NA Near Dhebewadi Road, Malkapur, Karad, Pin code- 415110, (33) Name of priority country :NA Maharashtra, India Maharashtra India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)ROHAN SHARADANAND PHATAK (87) International Publication No : NA 2)VIJAY RAJARAM SALUNKHE (61) Patent of Addition to Application Number :NA 3)ATUL RAMCHANDRA CHOPADE Filing Date :NA 4)PRAMOD ANIL PATIL (62) Divisional to Application Number :NA 5)PRASANNA SANJAYKUMAR PATIL

Filing Date :NA

(57) Abstract : Disclosed is a liposomal composition of Pterocarpus santalinus comprises of a stable encapsulation system comprises of 100mg of methanolic extract of Pterocarpus santalinus and synthetically processed lipid mixture composed of 400mg of phospholipid and 410mg of sterol wherein the said extract being capsulated within the said lipid mixture. Also provided is method of manufacturing the composition. Figure 1 No. of Pages : 38 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26920

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021027171 A (19) INDIA (22) Date of filing of Application :26/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ORGANIC FERTILIZER AND METHOD FOR MANUFACTURING ORGANIC FERTILIZER

(51) International classification :C05G3/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Makwana Kiran Vashrambhai (32) Priority Date :NA Address of Applicant :AT Khambha, Ta “ Sihor, Bhavnagar - (33) Name of priority country :NA 364240, Gujarat, India. Gujarat India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Makwana Kiran Vashrambhai

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Organic fertilizer and method for manufacturing organic fertilizer This organic fertilizer involves the use of natural ingredients available everywhere on the earth, to produce an organic fertilizer which has all the essential nutrients required for the flourishing growth of all kinds of plants. The main ingredients required to manufacture this organic fertilizer include withered leaves and branches from trees dampened in monsoon, a combination of different kinds of soil, cattle manure, green leaves extract and a combination of drinking water and drainage water. The method for manufacturing this fertilizer is simple, easy and economical due to which it can be easily made by farmers themselves for the good growth of crops. This organic fertilizer not only benefits the growth of plants, but also improves the quality of soil. Fig. 1 No. of Pages : 23 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26921

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021027187 A (19) INDIA (22) Date of filing of Application :26/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD TO RECOGNIZE HUMAN EMOTIONS WITH MULTI SCALE FEATURES FROM VIDEO SEQUENCES

(71)Name of Applicant : (51) International classification :G06F19/00 1)VELAGAPUDI SREENIVAS (31) Priority Document No :NA Address of Applicant :Research Scholar, Department of (32) Priority Date :NA Computer Science and Engineering, Sarvepalli Radhakrishnan (33) Name of priority country :NA University, NH-12, Hoshangabad Road, Bhopal, Madhya Pradesh- (86) International Application No :NA 462026, India. Madhya Pradesh India Filing Date :NA 2)Dr. VARSHA NAMDEO (87) International Publication No : NA 3)Dr. EDA VIJAY KUMAR (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)VELAGAPUDI SREENIVAS (62) Divisional to Application Number :NA 2)Dr. VARSHA NAMDEO Filing Date :NA 3)Dr. EDA VIJAY KUMAR

(57) Abstract : SYSTEM AND METHOD TO RECOGNIZE HUMAN EMOTIONS WITH MULTI SCALE FEATURES FROM VIDEO SEQUENCES Exemplary embodiments of the present disclosure are directed towards system and method to recognize human emotions with multi scale features from video sequences of an individual by using geometric feature and Local binary pattern (LBP) based techniques i.e., Adaptive Butterfly Optimization technique (ABOA) and deep belief network (DBN) methodologies. The system 100 to recognize human emotions with multi scale features from video sequences of an individual, comprising: a computing device 101 comprises an audio-visual computing module 102 configured to obtain a video of the individual and separating the video obtained into frames, a feature extraction module 104, a feature recognition module 106, an emotion recognition module 108 and a customized emotion recognition database 110, whereby the computing device 101 is communicated with a server 116 through a network 114, and whereby the customized emotion recognition database 110 configured to store and provide information related emotion recognition as per requirement. FIG. 1 No. of Pages : 50 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26922

(12) PATENT APPLICATION PUBLICATION (21) Application No.202021027274 A (19) INDIA (22) Date of filing of Application :26/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ATTACHMENT FOR A DRINKING VESSEL

(51) International classification :F01N3/00 (71)Name of Applicant : (31) Priority Document No :NA 1)WARRIER ELECTRONICS (32) Priority Date :NA Address of Applicant :180/1, RAVET, GANESH NAGAR (33) Name of priority country :NA MIDC ROAD, SHINDE VASTI, DEHUROAD, PUNE - 412101, (86) International Application No :NA MAHARASHTRA, INDIA Maharashtra India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)ROHIT WARRIER

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An attachment (102) for a drinking vessel (502) is disclosed. The attachment (102) comprises an inner wall (112), an arc shape (302) on the inner wall (112), an exterior wall (108), a plurality of ribs (104) on the inner side of the exterior wall (108), a curved surface (110) joining the inner wall (112) and exterior wall (108) and a curved edge (106). The attachment (102) is designed to act as a shield between the drinking vessel (502) and the lips of the user. No. of Pages : 25 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26923

(12) PATENT APPLICATION PUBLICATION (21) Application No.202022024823 A (19) INDIA (22) Date of filing of Application :12/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CLOG FREE CONDENSATION PROCESS FOR PET LIKE POLYMER PYROLYSIS VAPOUR

(51) International classification :C08L2205/00 (71)Name of Applicant : (31) Priority Document No :NA 1)SUHAS DIXIT (32) Priority Date :NA Address of Applicant :AGILE PROCESS CHEMICALS LLP, (33) Name of priority country :NA B-315, SHREE NAND DHAM, PLOT NO. 59, SECTOR “ 11, (86) International Application No :NA CBD BELAPUR, NAVI MUMBAI-400614, MAHARASHTRA, Filing Date :NA INDIA Maharashtra India (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)SUHAS DIXIT

Filing Date :NA (62) Divisional to Application Number :201921023312 Filed on :12/06/2019

(57) Abstract : CLOG FREE CONDENSATION PROCESS FOR PET LIKE POLYMER PYROLYSIS VAPOUR The present invention provides a novel process for condensation of polyethylene terephthalate like polymer pyrolysis vapour comprising fraction of Benzoic-acid and its derivatives. The process comprising of steps of supplying the pyrolysis reaction vapour to a direct contact condenser having inside temperature between -50 to 1200 degree Celsius, introducing a direct contact stripping oil-immiscible solvent stream that resulting into a mixture of pyrolysis oil with oil-immiscible solvent rich in Benzoic-acid and its derivatives, and phase separating at temperature between -50 to 200 degree Celsius to separate ˜pyrolysis oil from oil-immiscible solvent stream rich in Benzoic-acid and its derivatives. The novel process recovers the pure benzoic acid and its derivative as well as prevents the clogging of condenser by avoiding the solidification of Benzoic-acid and its derivatives in the condenser pipe without hampering the value added product quality as well as quantity. No. of Pages : 24 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26924

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041024258 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR BUILDING A PROTECTIVE LAYER AT DNS LEVEL FOR MALICIOUS ATTACKS ON THE INTERNET•

:H04L (71)Name of Applicant : (51) International classification 29/06 1)DIMA BUSINESS SOLUTIONS PRIVATE LIMITED (31) Priority Document No :NA Address of Applicant :3, Raja Street, Kallimadai, Trichy Road, (32) Priority Date :NA Singanallur, Coimbatore “ 641005 Tamil Nadu India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)S.Jegan Filing Date :NA 2)L.Sowmya (87) International Publication No : NA 3)Ayush Manoj Kurlerkar

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT System and method for building a protective layer at DNS level for Cyber Attacks on the Internet• This invention relates to a novel a system and method of providing threat intelligence by providing a safe internet browsing by keeping internet service providers™ links™ clean from malicious cyber-attacks by building a protective layers at DNS level itself by using artificial intelligence and Machine Learning technology. The traditional firewall used in a computing device is becoming less protective for the recent threats happening around. In fact, it might also be a huge pathway into the enterprise leaving it completely unprotected, which is populated by unrestricted DNS information. This has become a conduit of choice for cyber criminals looking to enter your network. The present invention is a solution to keep all advanced persistent threats away for business or personal network with its defensive function based on threat vector intelligence, information categories and countries (IP blocks) and it™s based on DNS Firewall with Automation and machine learning technology. No. of Pages : 15 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26925

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041024299 A (19) INDIA (22) Date of filing of Application :10/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : THE MULTI-PURPOSE LED PANEL BULB AND FRAME.

:H01L (71)Name of Applicant : (51) International classification 33/58 1)Saifu Antony Kokkat (31) Priority Document No :NA Address of Applicant :Kokkat House, East Kompara, (32) Priority Date :NA Irinjalakuda. P.O, Thrissur District, Kerala, PIN: 680 121 Kerala (33) Name of priority country :NA India (86) International Application No :NA 2)Mary Tresa Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)Saifu Antony Kokkat (61) Patent of Addition to Application Number :NA 2)Mary Tresa

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT Title: The Multi-Purpose LED Panel Bulb and Frame. A modular LED lighting system (Figure 3) with a bulb inlayed with neodymium magnets which may or may not be used as a conventional bulb connected to common wall mounted sockets or be used in tandem with the Multipurpose Panel Frame which comes with screws to which the inlayed magnets would attach itself and secure the bulb in place is disclosed. The screws may be adjusted in length from its zero point in order to elevate the bulb to a desired length or even use as a projector LED light for a aesthetic reasons by the user who may be a lay person. The Frame has been designed to overcome the problem of technical knowledge to replace the conventional recessed lights or damage the same may cause to the ceiling. No. of Pages : 22 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26926

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041025003 A (19) INDIA (22) Date of filing of Application :15/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SMART AND EFFICIENT HOSPITAL MANAGEMENT SYSTEM OVER THE CLOUD FOR DATA ANALYSIS AND SECURITY IN CASE OF PANDEMICS

(71)Name of Applicant : 1)Mr.RAGHAVA YATHIRAJU Address of Applicant :S/O YATHIRAJU VENKATESWARLU, C/o.ST. MARY'S GROUP OF INSTITUTIONS GUNTUR,GUNTUR-BAPATLA HIGHWAY ,CHEBROLU(V&M) GUNTUR Dt-522212. Andhra Pradesh India

2)Dr. K.N.VENKATA RATNA KUMAR :G06F (51) International classification 3). Dr. NALLAMOTHU NAGA MALLESWARA RAO 21/57 4)Mr. SUBHANI SHAIK (31) Priority Document No :NA 5)Mr. KALLURI VENKATARATNAM (32) Priority Date :NA 6)Mr. RIAZ SHAIK (33) Name of priority country :NA 7)Mrs.P.ANITHA RANI (86) International Application No :NA 8)Mr. S NYAMATHULLA Filing Date :NA 9)Mr. MANDA KIRAN KUMAR (87) International Publication No : NA 10)Mr. SHREEKUMAR THOTTAPPURAM (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)Dr. K.N.VENKATA RATNA KUMAR (62) Divisional to Application Number :NA 2)Mr.RAGHAVA YATHIRAJU Filing Date :NA 3). Dr. NALLAMOTHU NAGA MALLESWARA RAO 4)Mr. SUBHANI SHAIK 5)Mr. RIAZ SHAIK 6)Mr. KALLURI VENKATARATNAM 7)Mr. SHREEKUMAR THOTTAPPURAM 8)Mrs.P.ANITHA RANI 9)Mr. MANDA KIRAN KUMAR 10)Mr. S NYAMATHULLA

(57) Abstract : A smart and efficient hospital management system over the cloud for data analysis and security in case of pandemics is the proposed invention that aims at implementing an efficient hospital management system to efficiently manage the hospital data and reports which are very important for further analysis. Although there are many, one tedious task for a hospital management system is to record all sorts of data pertaining to their In- Patients, Out Patients, Nurses, Doctors and other attendants to the medical cases. Most importantly maintaining and analyzing the data during pandemics such as the present COVID 19 conditions that affected large sections of population globally, the proposed invention aims at implementing an efficient system to analyze and also provide security to such data. The invention creates a grid based application system and manages the patiently remotely using GPS. No. of Pages : 22 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26927

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041025573 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN APPARATUS ARRANGEMENT OF VEHICLE FOR HUMAN SAFETY SYSTEM

(71)Name of Applicant : 1)Dr.V.MOHANAVEL Address of Applicant :S/O P.VINAYAGAM, DEPARTMENT :B25J OF MECHATRONICS ENGINEERING, CHENNAI (51) International classification 9/16 INSTITUTE OF TECHNOLOGY, CHENNAI - 600069, TAMIL (31) Priority Document No :NA NADU, INDIA. Tamil Nadu India (32) Priority Date :NA 2)Dr. M.ARUNKUMAR (33) Name of priority country :NA 3)Dr. A.SENTHIL KUMAR (86) International Application No :NA 4)Mr.J.VAIRAMUTHU Filing Date :NA 5)Ms.S. PAVITHRA (87) International Publication No : NA 6)Mr.V. SIVARAMAN (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)Mr.J.VAIRAMUTHU (62) Divisional to Application Number :NA 2)Mr.V. SIVARAMAN Filing Date :NA 3)Ms.S. PAVITHRA

4)Dr. A.SENTHIL KUMAR 5)Dr. M.ARUNKUMAR 6)Dr.V.MOHANAVEL

(57) Abstract : An apparatus arrangement of vehicle for human safety system is the proposed invention that continuously monitors the safety of the driver and its co-passengers. To reduce the impact of collision when there is an accident, the proposed invention monitors whether the seat belt is been worn by the driver and the co-passengers which works by implementing a dual implementation procedure. The vehicle has a visual indication system to display the alert message that the seat belt has not been worn by the passenger. Also there is an alert message system which will call out the safety message that seat belt is not worn. Along with calling out the alerts the system will also start to stop the ignition exactly after 60seconds of the call out, so that user can prepare for the same. In short, the vehicle will cease its operation after 60 seconds of giving out the alert message. No. of Pages : 22 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26928

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041026284 A (19) INDIA (22) Date of filing of Application :22/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : FUNCTONAL MODIFICATION IN PALLET JEWELS OF MECHANICAL WATCH ESCAPEMENT WORK.

:G04B (71)Name of Applicant : (51) International classification 15/08 1)s n sheik umar wahith (31) Priority Document No :NA Address of Applicant :2/222, mullippatty, (32) Priority Date :NA Thirumalaisamudram, Trichy, Tamilnadu Tamil Nadu India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)sheik umar sahith

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : WATCH ESCAPEMENT WORK. Inventor: S N SHEIK UMAR SAHITH. OBJECTIVES: PROBLEM PALLET JEWEL STONES CURRENTLY USED. Pallet jewels are made of red sapphire crystals or ruby. A tiny bar shaped jewel stones with slope ends are used to reduce friction of escapement wheel movement in mechanical watches. For more than 100 years it was used as a standard model in all mechanical watches. But it did not obey the physical and mathematical laws in order to produce and release constant power to the working watch mechanism. It has the following errors. Banking delay of escapement wheel teeth with pallet stones of Swiss lever or pallet fork and produces sound (a tick sound). The sound was produced both in entry and exit pallet jewels. There is no correct banking place for escapement wheel teeth with the pallet jewels. (but constant banking) Banking and debanking error of escapement wheel teeth with pallet stones during the movement of pallet fork creates forward and backward movement of escapement wheel. Propulsion of both pallet jewels in the propulsion side of the pallet jewels are not even due to the sharp edge in the upper corner of pallet jewels. The slope edge made in pallet jewels will not give constant force to the lever movement. Did not obey physical rules correctly. RESULT: All these problems creates 1. Ticking sound in watch, 2. Jerking movement of seconds hand, and 3. Over all vibration in watch. 4. Creates unequal work load to escapement wheel, pallet fork and balance wheel. 5. Creates improper and random functioning all these three parts. SOLUTION: REDESINGED PALLET JEWEL STONES PROPERTIES. Newly designed functional part of the pallet jewels obey all the physical and mathematical principles required. Above said all the problems were eliminated. 1. It will not create any ticking sound since banking time delay will be minimized. 2. Works by constant friction and propulsion force on the pallet jewels by the teeth of escapement wheel. The propulsion of wheel teeth to jewels will be constant throughout the period of work. Propulsion of balance wheel jewel by pallet fork will be smooth and constant. 3. There will not be any backward movement of Escapement wheel. 4. Banking of escapement wheel teeth with pallet jewel can be done at any point of the banking place of jewel. (If necessary) REDESIGNING OF PALLET JEWELS. Either the pallet jewels or equivalent material was designed by making arcs, inverted arcs and mirror arcs at one end of the material that is going to interact with escapement wheel. It was made using axis of escape wheel, axis of pallet fork, and banking and debanking position of pallets. Both pallets vary in design. (Diagram Given below) 2. REDESIGNING OF ESCAPMENT WHEEL. The flat V or L shaped end of the existing escapement wheel teeth is to be modified to a blunt end or a fine circular structure that is suitable to meet the requirement of the modified pallet jewels. No. of Pages : 27 No. of Claims : 1

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26929

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041026402 A (19) INDIA (22) Date of filing of Application :23/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COVID19 PROTECTED ROOM: DISINFECTING ROOM AIR USING MACHINE LEARNING SYSTEM.

(71)Name of Applicant : 1)Mr. MANOHAR MADGI (ASSOCIATE PROFESSOR) Address of Applicant :C/o VIJAYALAXMI GURMITAKAL, PLOT NO. 115/116, KANAKA NAGAR, BRAHMAPUR, :G06N KALABURAGI -585103, KARNATAKA, INDIA. E-Mail: (51) International classification 20/00 [email protected] Karnataka India (31) Priority Document No :NA 2)Dr. RAMESH SHAHABADKAR (PROFESSOR) (32) Priority Date :NA 3)Ms. KRUTIKA RAMESH SHAHABADKAR (33) Name of priority country :NA (RESEARCH SCHOLAR) (86) International Application No :NA 4)Dr. BHARATI HARSOOR (PROFESSOR) Filing Date :NA 5)Dr. ARUNKUMAR JIRAGI (ASSOCIATE PROFESSOR) (87) International Publication No : NA 6)Mr. ASHOK PATIL (ASSISTANT PROFESSOR) (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)Mr. MANOHAR MADGI (ASSOCIATE PROFESSOR) (62) Divisional to Application Number :NA 2)Dr. RAMESH SHAHABADKAR (PROFESSOR) Filing Date :NA 3)Ms. KRUTIKA RAMESH SHAHABADKAR

(RESEARCH SCHOLAR) 4)Dr. BHARATI HARSOOR (PROFESSOR) 5)Dr. ARUNKUMAR JIRAGI (ASSOCIATE PROFESSOR) 6)Mr. ASHOK PATIL (ASSISTANT PROFESSOR)

(57) Abstract : Patent Title: Covid19 Protected Room: DISINFECTING ROOM AIR USING MACHINE LEARNING SYSTEM. ABSTRACT My Invention Covid19 Protected Room• is a system for disinfecting a room having first, second and third air inlets and an air intake control using machine learning assembly to prefer control air flow into the enclosure through the first, second and third air inlets. The Air flows between the exterior and interior of the enclosure through the second, third air inlet passes through a Covid19 killer filter assembly. The invention also includes an air dispersion outlet having a fan that draws air into the invention through the first, second and third air inlets and forces air out of the invention. The chemical dispersion assembly generates a disinfecting clean fog relative to the fan. The controller system (Machine learning Programming) controls the air intake control assembly to disperse the disinfecting clean fog into the room, and subsequently draw the disinfecting clean fog from the room and through the Covid19 killer filter assembly. Also UVC radiation onto complete room, disinfection controlled by Machine learning programming. The invention comprises a disinfection kit comprising a housing comprising a like a blower or fan for blowing air, a transparent tubular member for receiving air blown by the blower or fan and for directing it in a fixed direction. The invented kit/ devices is shown for providing substantially simultaneous disinfection of covid19, bacteria or other pathogens in air passing through the system using ultraviolet radiation from an ultraviolet light source and that is also capable of substantially simultaneous and efficient disinfecting room air and surfaces outside the device using the same ultraviolet light source. No. of Pages : 23 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26930

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041027335 A (19) INDIA (22) Date of filing of Application :27/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN INTERNET OF THINGS (IOT) BASED AIRBAG APPARATUS

:H04W (71)Name of Applicant : (51) International classification 4/70 1)MIT SQUARE SERVICES PRIVATE LIMITED (31) Priority Document No :NA Address of Applicant :NO. 20 NEERAJA HALCYON (32) Priority Date :NA VILLAS, BANJARA L/O MAIN ROAD, HORAMAVU AGARA (33) Name of priority country :NA Bangalore Karnataka India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Dr Mithileysh Sathiyanarayanan (87) International Publication No : NA 2)Dr Sumathi Sokkanarayanan (61) Patent of Addition to Application Number :NA 3)S Nikitha Saravanan

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An internet of things (IoT) based airbag apparatus for protecting a user from injuries due to mishaps is provided. The apparatus includes user 102, body motion tracking sensor 104, microcontroller 106, massager 108, airbag device 110, and alter system 112. Body motion tracking sensor 104 senses a fall motion of the user 102 with respect to a coordinate system. Airbag device 110 inflates airbag to protect user 102 when body motion tracking sensor 104 senses fall motion 10 and drowning in a swimming pool. The microcontroller 106 performs (a) recording, by apparatus, initial body position of user, (b) sensing, by body motion tracking sensor, fall motion of user by analyzing a shift of user from initial body position, (c) comparing, by apparatus, the fall motion of the user with a fixed threshold value, and (d) inflating, by airbag device, airbag when fall motion of user is greater than fixed threshold value to protect user from injuries. 15 FIG. 1 No. of Pages : 21 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26931

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041027386 A (19) INDIA (22) Date of filing of Application :27/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A MICRO FINE AIR SEPARATOR CHAMBER

:F25J (71)Name of Applicant : (51) International classification 3/04 1)Jinto A. J (31) Priority Document No :NA Address of Applicant :Jinto A. J S/o A.L.Johny, Arangassery (32) Priority Date :NA House, Edakkalathur, Near Post Office, Edakkalathur, (33) Name of priority country :NA THRISSUR, KERALA “ 680552 INDIA Kerala India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Jinto A. J

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : 7. ABSTRACT OF THE INVENTION: Title: A micro fine air separator chamber. A micro fine air separator chamber is disclosed. The chamber comprises of a feed storage (101) which is located at the top of the chamber, a feed control chamber (101A) which is provided to control said feed storage (101) located at the top of the chamber, a rotatory air wall (102), which acts as an air block, being located at the top and the bottom opening of the air separator chamber. An air blower (103) is located at one end of the chamber to generate positive air flow into the chamber and de-dusting unit / suction blower (104) is located at the other end of the chamber to generate a negative air flow. The blown particles are forwarded to said de-dusting unit (104) which then in turn moves said particles to dust collecting chamber (108) which attracts said blown ultra-particles through negative/suction blower or said de-dusting unit (104). No. of Pages : 12 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26932

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041027388 A (19) INDIA (22) Date of filing of Application :28/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : REMOTE ACCESS OF IVI SYSTEMS ENABLING IN-VEHCILE VALIDATION AND ASSOCIATED TEST AUTOMATION

:G06F (71)Name of Applicant : (51) International classification 11/36 1)Nagendra Prasad Nonavinakere Anantharamaiah (31) Priority Document No :NA Address of Applicant :#334, 16th Cross, J P Nagar 5th Phase, (32) Priority Date :NA Bengaluru-560078, Karnataka, India Karnataka India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)Nagendra Prasad Nonavinakere Anantharamaiah

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : REMOTE ACCESS OF IVI SYSTEMS ENABLING IN-VEHCILE VALIDATION AND ASSOCIATED TEST AUTOMATION The present invention relates to an automation setup and a method for validating In-vehicle Infotainment (IVI) systems embedded in a vehicle. The method utilizes Virtual Network Connectivity (VNC) setup. A VNC server is installed on the vehicle IVI system. A remote desktop or laptop running VNC client anywhere in the globe can connect to the IVI system. The local VNC client on the test setup exposes all the controls with respect to the operation of the IVI system. This setup and process enables access to the vehicle stationed in different geographies. Test labs can access and test features of vehicle through the IVI window. Figure of Abstract: Fig. 1 No. of Pages : 18 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26933

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041027603 A (19) INDIA (22) Date of filing of Application :29/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SANITIZER HAND GLOVES

:A41D (71)Name of Applicant : (51) International classification 19/00 1)K SHIVA PRASAD (31) Priority Document No :NA Address of Applicant :B1, Seetha Nilayam, 8-3-988/20/2, (32) Priority Date :NA Nagarjunanagar Colony, Hyderabad-500073, Telangana, India (33) Name of priority country :NA Telangana India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)K SHIVA PRASAD

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Reusable Sanitizer glove which is two layered that release sanitizer on the gloves whenever the user touches any surfaces or when they squeeze their palms; such sanitizer Gloves is attached with a small tank to store the sanitizer behind the palm which will have an on/off valve to be used as per requirement as well as a form pad in the palm region. A foam Pad or open cell matrix material is attached in the palm region of a glove and retains and releases sanitizer when squeezed. The foam pad and Sanitizer tank can be adhered/embedded to the glove integrally, or as a detachable accessory using mechanical or chemical adhesive systems as per the convenience of user. The Inner layer will be soft to hands and outer layer will constantly get sanitizer liquid as and when contacted with surfaces enabling the users to wear the Sanitizer Gloves for longer durations. No. of Pages : 17 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26934

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041027713 A (19) INDIA (22) Date of filing of Application :30/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A LOCKING SYSTEM FOR ACCESSING A LOCKER

:E05B (71)Name of Applicant : (51) International classification 49/00 1)THUMBIKKAI BUSINESS SOLUTIONS LLP (31) Priority Document No :NA Address of Applicant :15, West New Street, (32) Priority Date :NA Thirunageswaram, Thanjavur (District), Tamil Nadu-612 204, (33) Name of priority country :NA India Tamil Nadu India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Viknesh Vadivel

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure discloses a locking system for accessing a locker. The locking system comprises a controller, plurality of sensors, a short-range wireless communications transceiver, a switch, the plurality of sensors comprises at least one of a temperature sensor, and vibration and position sensor, and wherein the switch connected with a door of the locker. The controller is coupled with each of above said components. When the user device is in a predefined range of the locking system, the controller receives a user request from a user device to access the locker. The user request comprises user data and device authentication data unique to the user device. Upon receiving the user request, the controller monitors each of the plurality of sensors to detect whether the user device is in a predefined proximity range of the locker system, whether temperature of the locker is in a predefined temperature range, whether vibration and position of the locker is in the predefined vibration range and a predefined position range respectively. When above said conditions are met, the controller verifies the user data and device authentication data with prestored user data and prestored device authentication data. Based upon successful verification, enables the switch to unlock the door of the locker. No. of Pages : 21 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26935

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041027928 A (19) INDIA (22) Date of filing of Application :01/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SPATULAFUL HEALTHY COOKING DEVICE

(71)Name of Applicant : 1)M.Salomi Samsudeen Address of Applicant :Assistant Professor in department of Computer Science Engineering, KPR Institute of Engineering and Technology, Arasur, Coimbatore, Tamil Nadu, India-641407. Tamil Nadu India

(72)Name of Inventor : :H05B (51) International classification 1)M.Salomi Samsudeen 6/72 2)B.Surya (31) Priority Document No :NA 3)P.Titu Joachim (32) Priority Date :NA 4)J.Jeyabharathi (33) Name of priority country :NA 5)R.Sathya (86) International Application No :NA 6)C.S.Madhumathi Filing Date :NA 7) B.Sreeharan (87) International Publication No : NA 8)M.Vaishnavi (61) Patent of Addition to Application Number :NA 9)G.Thilak Filing Date :NA 10)S Sanjay Kumar (62) Divisional to Application Number :NA 11)M.Sakthi Niranjan Filing Date :NA 12)G.R.Swetha Preethi 13)E.Subash 14)S.Yuvaraj 15)K.Sujith 16)L.Savitha 17)R.Sreenithi 18)T.Yoganantha Sri

(57) Abstract : The invention comprises of a gas stove (1) with a one or multiple burners (2) along with one or multiple spatula holder (3) side of the gas stove as shown in the figure 1. A plurality of stowable spatula stand (4) which can be stowable as per the requirement to hang the spatula as per the requirement and as well height of stand is customisable according to the vessel"s height and width. No. of Pages : 8 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26936

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041027943 A (19) INDIA (22) Date of filing of Application :01/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : THE REMOVAL AND RECOVERY OF HEAVY METALS FROM AN INDUSTRIAL EFFLUENT BY AUTOMATED BATCH REACTOR

(71)Name of Applicant : 1)DR. A. SAKTHIVEL :C02F Address of Applicant :DEPARTMENT OF CHEMISTRY, (51) International classification 1/28 MEPCO SCHLENK ENGINEERING COLLEGE, SIVAKASI, (31) Priority Document No :NA VIRUDHUNAGAR TAMILNADU INDIA 626005. Tamil Nadu (32) Priority Date :NA India (33) Name of priority country :NA 2)DR.K. JEYASUBRAMANIAN (86) International Application No :NA 3)DR. J. DHAVEETHU RAJA Filing Date :NA 4)MR. B. THANGAGIRI (87) International Publication No : NA 5)DR. R. SARAVANA SATHYA PRABKAR (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)DR. A. SAKTHIVEL (62) Divisional to Application Number :NA 2)DR.K. JEYASUBRAMANIAN Filing Date :NA 3)DR. J. DHAVEETHU RAJA

4)MR. B. THANGAGIRI 5)DR. R. SARAVANA SATHYA PRABKAR

(57) Abstract : Recently, many researchers focussed the removal of heavy metals from industrial effluent through adsorption, chemical treatment, mechanical methods, membrane separation, etc. All methods so far adopted have some limitations, but among these, adsorption is a best method for the removal of heavy metals due to its simplicity, effectiveness, insensitivity to toxic substance reusability and its cost effectiveness. In this context, it is planned to use Prosopis juliflora biochar as an adsorbent for the removal of heavy metals like Cr(VI) from the tannery industry, Pb from battery, Cr/Pb released from paint industry etc., The biochar act as an adsorbent obtained from the Prosopis julijlora plant through the carbonization or pyrolysis method. The biochar effectively removes the heavy metals like Cr, Cd, Pb, Ni, etc., from the industrial effluent. After the removal of heavy metal, the treated effluent can be disposed without any harm. The adsorbed heavy metals present in the biochar can be recovered by treating with 0.1 N HCI as eluent. The obtained solution containing heavy metals on treating with sodium hydroxide may yield the precipitation of heavy metals as their respective metal hydroxide. Thus obtained metallic hydroxide can be used as raw material for the industries like paint, fireworks, tanneries, batteries, etc., after converting the hydroxide in to suitable forms. No. of Pages : 10 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26937

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028111 A (19) INDIA (22) Date of filing of Application :02/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SYSTEM FOR MEASURING THE ATTENTIVENESS OF ATTENDEES DURING AN ONLINE SESSION AND METHOD THEREOF

:H04L (71)Name of Applicant : (51) International classification 29/08 1)Ms. Pratignya Krishnamurthy (31) Priority Document No :NA Address of Applicant :A605, RNS Shanti Nivas, Tumkur (32) Priority Date :NA Road, Yeshwantpur, Bangalore-560022 Karnataka India (33) Name of priority country :NA 2)Mr. Ravikumar Shankaran (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Ms. Pratignya Krishnamurthy (87) International Publication No : NA 2)Mr. Ravikumar Shankaran

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A system for measuring the attentiveness of attendees during an online session and method thereof [0021] The present invention provides system for measuring the attentiveness of attendees during an online session and method thereof. The method (100) comprises the steps of conducting an online session by an organizer through a network-based application, wherein the online session is attended by one or more attendees. A pre-defined set of attentiveness parameters is configured by the organizer through the network- based application to perform a qualitative and quantitative analysis on the attentiveness of one or more attendees during the online session. Further, one or more prompts are uploaded on the network-based application by the organizer and the attentiveness of one or more attendees is determined. Subsequently, a report on the attentiveness of one or more attendees is generated and transmitted to the organizer and the attendees™ guardian/supervisor as a feedback of the attendees™ attentiveness. (FIGURE 1) No. of Pages : 14 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26938

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028123 A (19) INDIA (22) Date of filing of Application :02/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DESIGN FOR AUTOMATIC SANITIZER SPINDRIFT MACHINE FOR LEGAL TENDER

(71)Name of Applicant : 1)M.Karthiga Address of Applicant :Assistant Professor, Dept of CSE, Bannari Amman Institute of Technology, Sathyamangalam Tamil

Nadu India :G01N (51) International classification 2)Nandhini S S 35/02 3)Dr.R.GOMATHI (31) Priority Document No :NA 4)R.M.Tharsanee (32) Priority Date :NA 5)Dr. B Gomathy (33) Name of priority country :NA 6)S.Logeswari (86) International Application No :NA 7)T.Kanimozhi Filing Date :NA 8)R.ANITHA (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)M.Karthiga Filing Date :NA 2)Nandhini S S (62) Divisional to Application Number :NA 3)Dr.R.GOMATHI Filing Date :NA 4)R.M.Tharsanee 5)Dr. B Gomathy 6)S.Logeswari 7)T.Kanimozhi 8)R.ANITHA

(57) Abstract : Disinfecting note-based items is the need of the hour as microbes can spread through the daily note work. This invention focuses on note disinfector which is developed for disinfecting note of size A4 and lesser than that. It is not possible to sanitize Legal tender notes which is note based item using gel or liquid disinfector. Hence usage of UV rays can be utilized for disinfecting Legal tender notes which is exposed to UV lamps placed in a sanitization box. These lamps produce ozone which is able to disinfect even the unexposed area of the Legal tender notes. Various note-based items that enters the establishment can be exposed to ozone for disinfecting them. The device is operated by human intervention, where the operator opens the upper lid requesting the visitor to place the Legal tender notes on the lower lid. Nichrome wire is used for heating purpose with proper selection of resistivity placed in sleeve of mica, further wrapped in conductive cloth for the heat to be retender. Upper lid is closed as the power is switched on, the Legal tender notes are exposed to UV rays or Ozone thereby disinfecting the Legal tender notes. Safety is provided by limited power supplied to the device based on the timer control. No. of Pages : 12 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26939

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028134 A (19) INDIA (22) Date of filing of Application :02/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : INVESTIGATION ON WASTE PLASTIC TO FUEL BY PYROLYSIS PROCESS

(71)Name of Applicant : :C10G (51) International classification 1)Dr.P.SIVASANKARAN 1/10 Address of Applicant :DEPT OF MECH. ENGG, MIT, (31) Priority Document No :NA KALITHEERTHALKUPPAM, PONDICHERRY, INDIA - 605 (32) Priority Date :NA 107. Pondicherry India (33) Name of priority country :NA 2)Mr.P.SRIDHAR (86) International Application No :NA 3)Mr.A.RAJESH Filing Date :NA 4)Mr.M.UGENDIRAN (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Dr.P.SIVASANKARAN Filing Date :NA 2)Mr.P.SRIDHAR (62) Divisional to Application Number :NA 3)Mr.A.RAJESH Filing Date :NA 4)Mr.M.UGENDIRAN

(57) Abstract : abstract not submitted. No. of Pages : 0 No. of Claims : 0

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26940

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028141 A (19) INDIA (22) Date of filing of Application :02/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : INTERNET OF THINGS SENSORS BASED INTELLIGENT DOOR SECURITY SYSTEM FOR SMART HOME SECURITY

(71)Name of Applicant :

1)Mr. Basappa Bharamappa Kodada :G07C (51) International classification Address of Applicant :Associate Professor,Department of 9/00 Computer Science and Engineering, AJ Institute of Engineering (31) Priority Document No :NA and Technology, Mangalore Karnataka India (32) Priority Date :NA 2)Mr. Avaneesh A (33) Name of priority country :NA 3)Dr. Antony P J (86) International Application No :NA 4)Mr. Rakshit Shetty Filing Date :NA 5)Mr. Nayana Krishna P (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Mr. Basappa Bharamappa Kodada Filing Date :NA 2)Mr. Avaneesh A (62) Divisional to Application Number :NA 3)Dr. Antony P J Filing Date :NA 4)Mr. Rakshit Shetty 5)Mr. Nayana Krishna P

(57) Abstract : The present invention is related to an internet of things sensors based intelligent door security system for smart home security. The objective of the present invention is to solve the problems in the prior art related to adequacies in technologies in IoT based smart home securities. The system comprises a biometric module, a door locking control unit, a sensor module, a communication unit and a central computing unit. No. of Pages : 25 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26941

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028143 A (19) INDIA (22) Date of filing of Application :02/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CONTACTLESS MULTI-BIOMETRIC RECOGNITION SYSTEM FOR THE SAFETY AND SECURITY IN CRITICAL REGION

:G06K (71)Name of Applicant : (51) International classification 9/00 1)Mrs. Alugubelli Sandhyarani (31) Priority Document No :NA Address of Applicant :Assistant Professor, CSE, TKR College (32) Priority Date :NA of Engineering & Technology, Medbowli, Meerpet, Hyderabad (33) Name of priority country :NA Telangana India (86) International Application No :NA 2)Dr. S Viswanadha Raju Filing Date :NA 3)Dr. K.Reddy Madhavi (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Mrs. Alugubelli Sandhyarani Filing Date :NA 2)Dr. S Viswanadha Raju (62) Divisional to Application Number :NA 3)Dr. K.Reddy Madhavi

Filing Date :NA

(57) Abstract : Present invention in general relates to design and implement a contactless multi-biometric recognition system for safety and security in critical regions such as airports, railway-stations, seaports, land borders, classroom attendance, office buildings etc.with Iris, facial, digital finger etc. technologies based on building deep learning representations for surveillance live images with the help of fusion results by applying variety of future fusion strategies. The objective of this invention is to automate the person™s identity at the check-in point and to improve the recognition performance with machine learning algorithms. This motivation includes reduced manual process, staffing and shorter processing times. The proposed technology that promises greater convenience for users by simplifying and speed up the process. No. of Pages : 22 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26942

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028146 A (19) INDIA (22) Date of filing of Application :02/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD FOR PRODUCING GLYCEROL CARBONATE BY DIRECT CARBONATION REACTION OF GLYCEROL AND CO2 IN

:C07D (71)Name of Applicant : (51) International classification 317/36 1) ANNA UNIVERSITY, CHENNAI (31) Priority Document No :NA Address of Applicant :THE DIRECTOR, CENTRE FOR (32) Priority Date :NA INTELLECTUAL PROPERTY RIGHTS (CIPR), CPDE (33) Name of priority country :NA BUILDING, COLLEGE OF ENGINEERING GUINDY, ANNA (86) International Application No :NA UNIVERSITY, CHENNAI - 600 025, SARDAR PATEL ROAD, Filing Date :NA GUINDY Tamil Nadu India (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)K. PALANIVELU Filing Date :NA 2)V. KRISHNAVENI

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to the simultaneous transformation of glycerol and C02to valuable glycerol carbonate product by direct carbonation reaction in the presence of benign and heterogeneous nature metal-based Schiff base complex catalystsand the green solvent-DESs reaction media at mild reaction conditions. The molecular sieve 3A is added to adsorb the water molecules that are produced as a by¬product in the carbonation reaction.The present invention discloses the one-pot synthesis of metal-based Schiff base complex catalystsby reacting Schiff base solution and titanium isopropoxide in 1:1 -moleratio at 80°C for 24h in the presence of K2CO3 catalyst and the water-methanol mixed solvent in 1:2 (v/v) ratio for forming the titanium metal-based Schiff base complex catalyst, wherein, the Schiff base solution is prepared by mixing L-arginine and salicylaldehyde in 1:2 -mole ratio and the synthesized metal complex catalysts are utilized in the production of glycerol carbonate. No. of Pages : 29 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26943

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028148 A (19) INDIA (22) Date of filing of Application :02/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : APPARATUS FOR TREATING ORGANIC WASTE AND BREED BLACK SOLDIER FLY

:A01K (71)Name of Applicant : (51) International classification 67/03 1)VIJEESH K P (31) Priority Document No :NA Address of Applicant :"GOKULAM" MARUTHUR P.O (32) Priority Date :NA PATTAMBI, PALAKKAD, KERALA 679306. Kerala India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)VIJEESH K P

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An apparatus for treating organic waste and breed black soldier fly is disclosed. Said apparatus comprises of a hollow structure wherein organic waste is dropped into the hollow chamber inside the structure through an input opening (2) provided at the top portion. Plurality of openings (4) provided on its top cover provides the inlet/exit for black soldier flies, wherein said flies are attracted by the smell emanating from the organic waste. Egg deposition structures are provided on the inside walls of the apparatus as suitable platforms for the flies to lay eggs. The emerging larvae feeds on the organic waste, therein converting it into manure, wherein the maturing larvae are then allowed to climb out of the chamber through slanting members (8) provided, wherein they fell into collection containers (13) positioned strategically below, through the openings provided on the overhang (1) portion. No. of Pages : 19 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26944

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028296 A (19) INDIA (22) Date of filing of Application :02/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AUTOMATIC FLOAT SYSTEM FORPUMPING WATER TO A TANK ANDPREVENTING DRY RUNNING OF THE PUMP

:F04D (71)Name of Applicant : (51) International classification 15/02 1)Punchappadath Sukumaran Satheesan (31) Priority Document No :NA Address of Applicant :First Floor, Pappampillil House, (32) Priority Date :NA Vymeethi, Thripunithura, Kochi Kerala India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)Punchappadath Sukumaran Satheesan

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : This invention works as protection against dry running of pump and also as an automatic system which turn on the water pump when water reaches a minimum level and turns off the water pump when water fills up to a required level. The invention has three separate units; two float units and one control unit. Of the two float units; one is the ON FLOAT unit and the other is OFF FLOAT unit. The ON FLOAT unit turns on the water pump and the OFF FLOAT unit turns it off. The ON FLOAT unit comprises of a micro-switch with a lever which is actuated and released by the combination of a dead weight, a float ball and a stopper. The OFF FLOAT unit consists of a plastic float ball with many big holes on the top and a small hole on the bottom. It also consists of a micro switch with lever which is connected to the float ball with a plastic wire. The plumbing of inlet pipe is made in such a way that a part of the inlet water goes in to the float ball of the OFF switch. When water goes below a predetermined minimum level, the deadweight pulls and actuates the micro switch in the ON FLOAT unit and turns on the water pump. As water fills up, a part of the inlet water falls on the float ball of the OFF FLOAT switch and water fills in the ball. The increased weight actuates micro switch thus a stand by electrical connection is activated for pumping in OFF FLOAT unit. When water pumping is exhausted or when pump is running dry, water drains through the small hole beneath the float ball. This causes the micro switch of the OFF FLOAT to release and pumping to be discontinued. The pumping also stops when water is pumped to the maximum level and the float ball of the OFF FLOAT unit is immersed in the rising water completely because its weight is reduced by buoyancy which causes the micro-switch to release. The control unit of the system comprises of a selection switch which has three modes; Automatic, Off and Manual which allows the user to use the system in Manual mode also. This control unit also has a buzzer which provides a caution signal for pump starting and pump dry-running. No. of Pages : 13 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26945

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028337 A (19) INDIA (22) Date of filing of Application :03/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : EFFECTIVE USAGE OF INDUSTRIAL WASTE WATER AS HYDRAULIC FLUID

:C09K (71)Name of Applicant : (51) International classification 8/46 1)Dr.P.Vincent Venkatesan (31) Priority Document No :NA Address of Applicant :Mepco Schlenk Engg. College, Mepcq (32) Priority Date :NA Nagar, Sivakasi, Tamil Nadu, India-626 005. Tamil Nadu India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)Dr.P.Vincent Venkatesan Filing Date :NA 2)Ms. R.Priya Sakthi (87) International Publication No : NA 3)Mrs. K.L.Aparnaa (61) Patent of Addition to Application Number :NA 4)Ms. A.Sree lekha

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Our project "Effective usage of Industrial waste water as a hydraulic fluid" focuses on the possible ways to reduce the impact of waste water discharged into natural water bodies without proper treatment. The discharged wastewater reduces the self-purification of natural water bodies. The discharge quantity is increasing at an alarming rate and by utilizing this wastewater in maximum ways possible we could reduce the impact. The wastewater from Oil refineries has a large amount of oil waste which can be collected from skimming tanks during preliminary treatment. The scum thus collected from the Skimming tank can be used as a hydraulic fluid by altering few necessary properties. After removing the impurities, the properties of waste oil are tested. In our project we have taken servo 68 as the standard hydraulic fluid. The most important property that can determine the usage as hydraulic fluid is the liquid"s viscosity. So, it is essential that we need to improve the viscosity of the oil with respect to its application. The viscosity of the extracted oil is improved by selecting the suitable blending agent in a proper proportion. The final product produced out of this process is found to have viscosity almost close to the viscosity of a standard fluid. No. of Pages : 24 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26946

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028338 A (19) INDIA (22) Date of filing of Application :03/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SELF-REPAIRING ROADS WITH COMPOSITES OF BLACK CARBON AND REJUVENATED CAPSULES OF CALCIUM ALGINATE

:B32B (71)Name of Applicant : (51) International classification 27/30 1)R.SHANMUGA PRIYAN (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF CIVIL (32) Priority Date :NA ENGINEERING, MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE, SIVAKASI, TAMILNADU, INDIA-626005. Tamil (86) International Application No :NA Nadu India Filing Date :NA 2)B.PRABURAJAN (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)R.SHANMUGA PRIYAN Filing Date :NA 2)B.PRABURAJAN

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : In the research we would find out the effective usage of black carbon powder in bitumen. For identification of basic properties changes in bitumen after addition of black carbon powder in various percentages like 2%,4%,6%,8%,10%for all the different percentage addition of black carbon to the bitumen, tests were conducted to identify the basic properties changes and optimum addition of black carbon powder for the way to increase its stability of the pavement surface, Increase the elasticity of road surface. Find how to extend the life of the pavement surface and reduce the disintegration of the pavement. It helps to reduce the formation of the holes and also lifetime of the road surface get increased and also the cost for the laying the surface reduced hugely, and the rigidity of the surface get increased. The availability of the black carbon is very high, and they are available at very cheap rate at the market. The main advantage of the black carbon mixing with the bitumen is to reduce the usage of the black carbon and to increase the recycle.material in the pavement surface. In our project we have submitted the test results completely to ensure the safety level of adding the black carbon where over usage of the black carbon causes severe damage to the road surface. So, we have conducted seven type of tests to ensure the stability and strength of adding the normal bitumen with the black carbon powder. This may reduce the pollution and it will be eco-friendly to the environment. We have calculated the total benefits and the results obtained from the different tests conducted are checked at which percentage does the mixing of black carbon powder attain the greater stability. With the addition of the encapsulated rejuvenators capsules releases the encapsulated oil in small volumes after breakage by the action of an external mechanical trigger. From the previous studies it was proven that Ca-alginate capsules, can affect the bulk density and air void content of asphalt mixtures, which thereby have a great influence on the self-repairing properties of the asphalt mixtures. No. of Pages : 15 No. of Claims : 1

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26947

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028384 A (19) INDIA (22) Date of filing of Application :03/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A PANEL ASSEMBLY

:E04F (71)Name of Applicant : (51) International classification 13/00 1)SRM Institute of Science and Technology (31) Priority Document No :NA Address of Applicant :Kattankulathur, Chennai-603203, Tamil (32) Priority Date :NA Nadu, India Tamil Nadu India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)S.Pradeep Filing Date :NA 2)Hiranya Tallam (87) International Publication No : NA 3)Shruthi Chordia (61) Patent of Addition to Application Number :NA 4)Shirshendu Roy Filing Date :NA 5)S.Srinivasa Senthil

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT A PANEL ASSEMBLY The present invention relates to the field of wall panels and the present disclosure envisages a panel assembly (100) for covering a wall or a portion thereof. The panel assembly (100) comprises a plurality of precast units (102), a plurality of bolts (106) and plates (104), and an engagement means. The plurality of bolts (106) and plates (104) is configured to be mounted in the wall or portion thereof which needs to be covered. The engagement means is configured to enable each of the units (102) to detachably engage at least one of the bolts (106) and plates (104) to form a panel covering said wall or portion thereof. The assembly (100) is reusable, have high load carrying capacity, requires less skill labor, and requires less time for installation. No. of Pages : 19 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26948

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028431 A (19) INDIA (22) Date of filing of Application :03/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A RESTRICTED ELEMENTARY CARE IN THE HEALTHCARE SYSTEM WITH BLOCKCHAIN TECHNOLOGY

(71)Name of Applicant : 1)Mr. C. Ananth Address of Applicant :Assistant Professor/Programmer, Division of Computer and Information Science, Annamalai University, Annamalai Nagar, Cuddalore, Tamil Nadu, India “ 608 002 Tamil Nadu India 2)Dr. M. Karthikeyan 3)Dr. Arun Balodi :G06Q 4)Dr. N. Mohananthin (51) International classification 50/22 5)Mrs. N.S. Kavitha (31) Priority Document No :NA 6)Mrs. M. Chitra (32) Priority Date :NA 7)Mr. S. Saranraj (33) Name of priority country :NA 8)Ms. M. Ranjitha (86) International Application No :NA 9)Dr. K. Sathiyasekar Filing Date :NA 10)Mr. R. Rajarajan (87) International Publication No : NA 11)Mrs. S. Suganya (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)Mr. C. Ananth (62) Divisional to Application Number :NA 2)Dr. M. Karthikeyan Filing Date :NA 3)Dr. Arun Balodi

4)Dr. N. Mohananthin 5)Mrs. N.S. Kavitha 6)Mrs. M. Chitra 7)Mr. S. Saranraj 8)Ms. M. Ranjitha 9)Dr. K. Sathiyasekar 10)Mr. R. Rajarajan 11)Mrs. S. Suganya

(57) Abstract : An electronic social health records in the essential consideration are an important wellspring of human services keenness. The electronic records support a verified and stable framework which requires to be as often as possible common between the hospitals. The contribution of electronic records can be fundamental advance to present shrewd as well as enhanced social insurance association administration. Sharing the electronic records, among the foundations or spots, can be a troublesome assignment. The present sharing strategies, to efficiently deal with also defend the therapeutic records, have been inadequate. The Blockchain innovation exhibits an unchanging shared and straightforward history of the considerable number of exchanges to develop the applications with responsibility, straightforwardness, and trust. This innovation shows a restrictive chance to augment secure and trustable records the board to be imparted to the medicinal services framework. In this work, we present our points of view resting on Blockchain innovation inside the medicinal services framework. Conveyed record squares structure essential consideration electronic records. No. of Pages : 17 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26949

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028433 A (19) INDIA (22) Date of filing of Application :03/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SMART GUARDIAN: HELPS PARENTS TO KEEP KIDS IN VIRTUAL BOUNDARY SOUNDING USING RSSI AND WIRELESS COMMUNICATION SYSTEM

(71)Name of Applicant : 1)Dr. G. RAMPRABU Address of Applicant :No.24, F1, Punithavathy Colony Main Road, Gowrivakkam, Chennai “ 600 073, Tamil Nadu, India.

Tamil Nadu India :H04B (51) International classification 2)Dr. B. MUTHUVEL 17/318 3)Dr. G. IRUSAPPARAJAN (31) Priority Document No :NA 4)Dr. N. MADHANAKKUMAR (32) Priority Date :NA 5)Dr. G. PREM SUNDER (33) Name of priority country :NA 6)Dr. P. SATHEESHKUMAR (86) International Application No :NA 7)Dr. Su. SUGANTHI Filing Date :NA 8)A. RAJASEKAR (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Dr. G. RAMPRABU Filing Date :NA 2)Dr. B. MUTHUVEL (62) Divisional to Application Number :NA 3)Dr. G. IRUSAPPARAJAN Filing Date :NA 4)Dr. N. MADHANAKKUMAR 5)Dr. G. PREM SUNDER 6)Dr. P. SATHEESHKUMAR 7)Dr. Su. SUGANTHI 8)A. RAJASEKAR

(57) Abstract : ABSTRACT SMART GUARDIAN: HELPS PARENTS TO KEEP KIDS IN VIRTUAL BOUNDARY SOUNDING USING RSSI AND WIRELESS COMMUNICATION SYSTEM A wireless communication system for keeping track of location of kids is disclosed. A virtual boundary is simulated and the system enables accurate location of a kid inside the said boundary, thereby allowing for continual monitoring and safety of the kid. Communication takes place by creating a wireless secured area network. A number of motes can be networked which will lead to a large communication network. Every mote can be placed in a desired place or area which acts as reference mote. (Parents) and the kids having the display mote. These motes are communicating with one another (Parents & kids) in range of frequency about 2.4 GHz. This new navigation scheme can provide accurate position estimation and thereby acts as a Smart guardian to the kids. No. of Pages : 13 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26950

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028459 A (19) INDIA (22) Date of filing of Application :03/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : WATER CONSUMPTION CONTROL SYSTEM FOR IRRIGATION BASED ON IOT

(71)Name of Applicant : 1)Dr.S. Yuvaraj, SRM Institute of Science and Technology Address of Applicant :SRM Institute of Science and

Technology Kattankulathur, Chengalpattu-603203 Tamil Nadu :G01F (51) International classification India 15/06 2)Mr K.Vengatesan, Sanjivani College of Engineering (31) Priority Document No :NA 3)Dr.Jeevaa Katiravan, Velammal Engineering College (32) Priority Date :NA 4)Dr. S. M. UDHAYA SANKAR, SRM Institute of Science (33) Name of priority country :NA and Technology (86) International Application No :NA 5)Dr. J. Selvakumar, SRM Institute of Science and Filing Date :NA Technology (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Dr.S. Yuvaraj, SRM Institute of Science and Technology Filing Date :NA 2)Mr K.Vengatesan, Sanjivani College of Engineering (62) Divisional to Application Number :NA 3)Dr.Jeevaa Katiravan, Velammal Engineering College Filing Date :NA 4)Dr. S. M. UDHAYA SANKAR, SRM Institute of Science and Technology 5)Dr. J. Selvakumar, SRM Institute of Science and Technology

(57) Abstract : ABSTRACT The invention provides a water consumption control system based on IoT (Internet of Things) which includes placing a plurality of sensor hubs in predetermined locations in a farm, each hub including a moisture content data acquisition system and an humidity data collection system; and monitoring key elements in the growing of plants from a plurality of sensor hubs including humidity, temp, soil moisture, and elements that influence plant growth. The invention further comprises an operation application layer, a data gathering layer and an analysis control layer, wherein the operation application layer is used for a water consumption device, data from multiple sensors are transmitted to the data gathering layer through the IoT; the data gathering layer gathers the data transmitted from the operation application layer, and the data are uploaded to the analysis control layer; and the analysis control layer analyzes and processes the data and corresponding operation processing is given. Based on the accumulated data from the multiple sensors, the processor analyses them to determine the region of interest wherein the moisture and humidity content is below the predetermined threshold for activating the corresponding relay and irrigation motor to supply water of required quantity to the thriving plants. No. of Pages : 13 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26951

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028484 A (19) INDIA (22) Date of filing of Application :04/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : VIRUS CONTROL IN SHRIMP CULTIVATION BASED ON INTERNET OF THINGS

(71)Name of Applicant : :H04L 1)Dr. Tummapudi Subha Mastan Rao (51) International classification 29/08 Address of Applicant :Mellempudi (PO), Tadepalli (Mandal), (31) Priority Document No :NA Guntur District, Andhra Pradesh, India, Pin-522303 Andhra (32) Priority Date :NA Pradesh India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)Dr. Tummapudi Subha Mastan Rao Filing Date :NA 2)Dr.Vijaya Sri Kompalli (87) International Publication No : NA 3)UDAYASRI KOMPALLI (61) Patent of Addition to Application Number :NA 4)G.V.S.NARAYANA Filing Date :NA 5)Mr David Raju Kuppala (62) Divisional to Application Number :NA 6)Mrs PILLI SHYAMALA MADHURI Filing Date :NA 7)Yallapragada Ravi Raju

8)MARNI SRINU

(57) Abstract : ABSTRACT: Title: Virus Control in Shrimp Cultivation based on Internet of Things The present invention discloses a system for the detection of virus formation in shrimp cultivation pond. The system comprises shrimp pond installed with a pond system 101 components in connection with the pond water that includes an underwater image capturing means 102, a wireless transmitter 103, a water parameter sensing means 104, a controller 105 and an alert means 106. The system 100 further comprises a cloud processing means 107 and an external terminal 108. The cloud processing means utilizes artificial intelligence to detect the virus formation. Thus, the proposed system provides a low cost investment to detect the virus formation and allows the farmer to take proactive decisions in advance to stop generation of virus. No. of Pages : 16 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26952

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028523 A (19) INDIA (22) Date of filing of Application :04/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ENTROPY BASED IMAGE RETRIEVAL METHOD FOR FASTER RETRIEVING OF IMAGES

(71)Name of Applicant : 1)Mrs.K.Saraswathi Address of Applicant :Assistant Professor, Department of Computer Science, Nehru Memorial College, Puthanampatti- 621001, Tamilnadu, India Tamil Nadu India 2) Dr.R.Reka

3)Dr. Anil Lamba :G06F (51) International classification 4)Dr. S. Shanmugan 16/58 5)Dr. S. R. Boselin Prabhu (31) Priority Document No :NA 6)Dr. Prasad Janga (32) Priority Date :NA 7)Mohammad Shahbaz Khan (33) Name of priority country :NA 8)Dr. S. Ravichandran (86) International Application No :NA 9)Dr.S.Chidambaranathan Filing Date :NA 10)Dr. N. Muthukumaran (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Mrs.K.Saraswathi Filing Date :NA 2)Dr.R.Reka (62) Divisional to Application Number :NA 3)Dr. Anil Lamba Filing Date :NA 4)Dr.S.Shanmugan 5)Dr. S. R. Boselin Prabhu 6)Dr. Prasad Janga 7)Mohammad Shahbaz Khan 8)Dr.S. Ravichandran 9)Dr.S.Chidambaranathan 10)Dr. N. Muthukumaran

(57) Abstract : The critical step of image mining is image processing. This invention focuses on mining images from a large collection of images using the unique feature identified and extracted from the image. In this invention, the concepts of Content Based Image Retrieval and Image mining and a new clustering technique is introduced to increase the speed of the image retrieval method. The extracted features are evaluated for goodness and are tested on the images. The ranks assigned to the images based on the entropy values. Here, the images are retrieved based on the values of entropy. The images in the data warehouse are clustered using the entropy values of the images. The ranks of all images in the database are changed due to the entropy values of the images during image retrieval. Also, the execution time is reduced to retrieve the images from the database because of its entropy ranks No. of Pages : 11 No. of Claims : 2

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26953

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028541 A (19) INDIA (22) Date of filing of Application :05/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMPUTER IMPLEMENTED METHOD FOR DETECTION TEXT-BASED CYBER STALKING IN DATA TRANSMISSION USING MACHINE LEARNING

(71)Name of Applicant :

1)Dr. SUBHASHINI P :H04L (51) International classification Address of Applicant :Associate Professor, CSE, MLR 29/06 Institute of Technology, Dundigal Police station, Hyderabad, (31) Priority Document No :NA Telangana 500043. Telangana India (32) Priority Date :NA 2)Dr. S. RAMAKRISHNA (33) Name of priority country :NA 3)Dr. N.SWAPNA (86) International Application No :NA 4)Dr. B.PADMAJA RANI Filing Date :NA 5)Dr. SURESH KALLAM (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Dr. SUBHASHINI P Filing Date :NA 2)Dr. S. RAMAKRISHNA (62) Divisional to Application Number :NA 3)Dr. N.SWAPNA Filing Date :NA 4)Dr. B.PADMAJA RANI 5)Dr. SURESH KALLAM

(57) Abstract : The present invention is related to computer implemented method for detection text-based cyber-stalking in data transmission using machine learning. The objective of the present invention is to solve the problems in the prior art related to adequacies in technologies used in detection text-based cyber-stalking in data transmission. No. of Pages : 24 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26954

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028546 A (19) INDIA (22) Date of filing of Application :05/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DESIGN OF NOVEL ELECTROSTATIC SPRAY MACHINE FOR KILLING LOCUST

(71)Name of Applicant : 1)Dr J A Ranga Babu, Associate professor Address of Applicant :Gudlavalleru Engineering College Gudlavalleru Andhra Pradesh Andhra Pradesh India 2)Mr.Premanth S P, Asst.Professor :B05B 3)Dr. D. S. JAYALAKSHMI, ASSISTANT PROFESSOR, (51) International classification 5/053 4)Ms.M.Lorate Shiny, Asst.Professor (31) Priority Document No :NA 5)Dr. R. Renuka Devi, Assistant Professor, (32) Priority Date :NA 6)Dr. S. Saravanan,Professor and Head, (33) Name of priority country :NA 7)Mrs.G.Indumathi, Assistant Professor (86) International Application No :NA 8)Mrs.T.Nagalakshmi,Assistant Professor Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)Dr. D. S. JAYALAKSHMI, (61) Patent of Addition to Application Number :NA 2)Dr J A Ranga Babu, Associate professor Filing Date :NA 3)Ms.M.Lorate Shiny, Asst.Professor (62) Divisional to Application Number :NA 4)Dr. S. Saravanan, Professor and Head, Filing Date :NA 5)Dr. R. Renuka Devi, Assistant Professor

6)Mrs.G.Indumathi, Assistant Professor 7)Mrs.T.Nagalakshmi, Assistant Professor 8)Mr.Premanth S P, Asst.Professor, 9)Dr Nageswaran A, Associate Professor,IT Dept. 10)Dr S Arun, Professor,ECE

(57) Abstract : ABSTRACT Design of machine for killing locust by spraying pesticide is focused in this invention. Efficiency for large area is increased by applying the theory of electrostatic spray in machine design. Results of spraying are improved by electrostatic inductive sprayer for killing locust. Performance is improved for the inductive based electrostatic sprayer which is evaluated for testing purpose. Results from testing prove that the ratio of charge to mass attains 0.962 mc/Kg at a electrostatic voltage of 20 KV at a working pressure of 0.29-0.39 MPa. Concentration of distribution of particle size is higher for charged droplets compared to that of droplets that are uncharged. Also the charged droplets have fast axial velocity compared to that of uncharged droplets along with improvement in uniformity in distribution of velocity. Deposition rate is 15% greater for charged droplets than uncharged droplets where the deposition of pesticide is obvious behind leaves. No. of Pages : 12 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26955

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028557 A (19) INDIA (22) Date of filing of Application :05/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DEVELOPMENT OF A HEARTBEAT AND TEMPERATURE MEASURING SYSTEM FOR REMOTE HEALTH NURSING DURING PANDEMIC (COVID-19)

(71)Name of Applicant : 1)Dr.S.SivaRanjani, Professor & Head Address of Applicant :Sethu Institute of Technology Pulloor, Tamil Nadu India 626115 Tamil Nadu India 2)Dr.R.Aghila, Associate Professor 3)R.T.Subhalakshmi,Associate Professor :G06Q 4)S.Rathnamala, Associate Professor (51) International classification 50/22 5)C.Parameswari, Associate Professor (31) Priority Document No :NA 6)Dr.D.Rojaramani, Associate Professor (32) Priority Date :NA 7)M.M.Yamunadevi, Associate Professor (33) Name of priority country :NA 8)S.V.K.Muthukumar, Associate Professor (86) International Application No :NA 9)K.Krishnaveni, Associate Professor Filing Date :NA 10)P.Pabitha Muthu, Associate Professor (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Dr.S.SivaRanjani, Professor & Head Filing Date :NA 2)Dr.R.Aghila, Associate Professor (62) Divisional to Application Number :NA 3)R.T.Subhalakshmi,Assistant Professor Filing Date :NA 4)S.Rathnamala, Assistant Professor

5)C.Parameswari, Assistant Professor 6)Dr.D.Rojaramani, Assistant Professor 7)M.M.Yamunadevi, Assistant Professor 8)S.V.K.Muthukumar, Assistant Professor 9)K.Krishnaveni, Assistant Professor 10)P.Pabitha Muthu, Assistant Professor

(57) Abstract : System for remote nursing is developed for indentifying glitches such as extraction of data and data tuning in a dynamic way for preserving the transmission of data quality specifically for the aged people who find it difficult to visit hospital or clinic often. In this invention, a novel design is implemented for monitoring of heart beat and body temperature of patient based on microcontroller using the finger tip sensor device and temperature sensor. Challenges of existing method are identified hence proposed a network accessible for the user especially between the doctor and the patient. This enables monitoring of patient thereby providing remote nursing for the aged and patients in need. Reliability of the system is such that the measured data of heart beat and temperature are accurate as taken in person by the nurse herself. Intense care is provided to the patient by the doctor from remote places avoiding the patient to reach hospital to get treatment. Remote nursing has found innovative solution for the problem of aged to visit hospital frequently No. of Pages : 12 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26956

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028636 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AUTONOMOUS VEHICLE WITH EFFICIENT NAVIGATION FOR GARBAGE COLLECTION AND ECO-FRIENDLY RECYCLING AND SEGREGATION

:G06F (71)Name of Applicant : (51) International classification 12/02 1)B.LAKSHMANAN (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF CSE, MEPCO (32) Priority Date :NA SCHLENK ENGINEERING COLLEGE, MEPCO (33) Name of priority country :NA ENGINEERING COLLEGE(PO), SIVAKASI, TAMIL NADU, (86) International Application No :NA INDIA-626005. Tamil Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)Mr.B.SELVAKUMAR (61) Patent of Addition to Application Number :NA 2)Mr.P.S.VIVEK RAJA Filing Date :NA 3)Mr.K.KALATHIAPPAN

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT Waste collection, storage and transport are essential elements of any solid waste management system and can be major challenges in India. Waste collection is the responsibility of the municipal corporations in India, and bins are normally provided for biodegradable and inert waste. Mixed biodegradable and inert waste is often dumped with open burning is a common practice in India. The Kitchen waste is often dumped into trash without realizing the recycling methods which can be turned into organic fertilizers for the farmers. Intention of our invention is to overcome above said shortcomings, in which autonomous robot is developed for efficient navigation for garbage collection and employing vision based deep learning technique for classification and segregation of non- biodegradable from biodegradable waste with eco-friendly recycling of biodegradable waste into organic fertilizers. No. of Pages : 14 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26957

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028637 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BATTERY MONITORING SYSTEM WITH FIREBASE CONSOLE

(71)Name of Applicant : :G01R 1)CHENDURVEL.K (51) International classification 31/36 Address of Applicant :432, AMMAPET MAIN ROAD, (31) Priority Document No :NA SALEM-636001, TAMIL NADU, INDIA. Tamil Nadu India (32) Priority Date :NA 2)DHANUSH.S (33) Name of priority country :NA 3)RAVICHANDRAN.C.S (86) International Application No :NA 4)PRABHA.S.U Filing Date :NA 5)BALAMURUGAN.K (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)CHENDURVEL.K Filing Date :NA 2)DHANUSH.S (62) Divisional to Application Number :NA 3)RAVICHANDRAN.C.S Filing Date :NA 4)PRABHA.S.U

5)BALAMURUGAN.K

(57) Abstract : ABSTRACT BATTERY MONITORING SYSTEM WITH FIREBASE CONSOLE Now a days the batteries are widely used in many application like home appliance UPS Inverter. In this case the maintenance and monitoring are not properly done, since it is done approximately and so on it"s not maintained, it leads to battery failure. Hence in this work an IOT based monitoring has been carried out using the cloud storage and android application, thus the batteries voltage level, electrolyte solution level and batteries inner temperature has monitored. These values send to the android application and indicate thus the battery life and efficiency will be improved by proper maintenance. No. of Pages : 9 No. of Claims : 0

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26958

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028640 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : GEARLESS SLIDER FLAPPING WING MECHANISM

(71)Name of Applicant : 1)D. SUDEESH ARPUTHAM :B64C Address of Applicant :D-9, RR GAJANANAM (51) International classification 33/02 APARTMENT, SUSEELA NAGAR, NANJUNDAPURAM P.O., (31) Priority Document No :NA COIMBATORE, TAMIL NADU, INDIA,-641036. Tamil Nadu (32) Priority Date :NA India (33) Name of priority country :NA 2)T.YUVAN NETHAJI (86) International Application No :NA 3)V.SUJITH KUMAR Filing Date :NA 4)S.MOHAIDEEN (87) International Publication No : NA 5)Dr.G.SUGANYA PRIYADHARSHINI (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)D. SUDEESH ARPUTHAM (62) Divisional to Application Number :NA 2)T.YUVAN NETHAJI Filing Date :NA 3)V.SUJITH KUMAR

4)S.MOHAIDEEN 5)Dr.G.SUGANYA PRIYADHARSHINI

(57) Abstract : Abstract Ornithopter mechanisms are one of the fascinating explorations in the field of Mechanisms and Machines. The proposed gearless sliding flapping mechanism is an intricately planned out design which incorporates unembellished mechanical joints and links to accomplish uniqueness. Unlike other common pre-existing ornithopter mechanisms, the proposed mechanism does not employ any gears, thus facilitating in noise reduction and vibration control. The wing flapping motion exhibited by the proposed mechanism is free from any phase lag thus aiding in a smooth rhythmic symmetric flapping action. The mechanism is designed in such a way that the lower flap angle is greater than the upper flap angle so that greater thrust force can be generated at relatively smaller flap angles. Since the complete mechanism functions on hinge joints and slider mechanisms without the usage of dynamic mechanical components and joints, the proposed mechanism is less wearable and more durable. The assembly of various components of the proposed mechanism is structured in a plain sailing manner making the maintenance and operation more convenient. The proposed Gearless Slider Flapping Wing Mechanism is designed primarily for the application of Micro-Aerial Vehicle Flight. The mechanism is flexible enough to adapt to a number of different aero foil designs and wingspans, which further puts light on the novelty of the design. No. of Pages : 9 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26959

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028645 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : INTERFACING ULTRASONIC NDT BASED IOT WITH AI FOR EXAMINING THE ENGINEERING MATERIALS

:g01N (71)Name of Applicant : (51) International classification 29/06 1)Dr.P.RADHA (31) Priority Document No :NA Address of Applicant :MCA DEPARTMENT, MEPCO (32) Priority Date :NA SCHLENK ENGINERRING COLLEGE, SIVAKASI-626 005, (33) Name of priority country :NA TAMIL NADU, INDIA Tamil Nadu India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Dr.P.RADHA (87) International Publication No : NA 2)Dr.N.SELVAKUMAR (61) Patent of Addition to Application Number :NA 3)Dr.J.RAJA SEKAR Filing Date :NA 4)Mr.J.V.JOHNSONSELVA

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Interfacing Ultrasonic NDT based IoT with AI for Examining the Engineering materials. .Abstract The primary objective of this invention is to integrate ultrasonic based NDT with IoT to examine the defects of Magnetic and Non-Magnetic materials of critical component of Military / Industry for the remote users. NDT is able to examine the material parts of vehicles, weapons and fuel engine parts etc., without destroying the components. The IoT is able to integrate the things and people using the Internet protocol"IVP6!0. To enable the remote examination, lot integrates the Cloud storage with NDT. The ultrasonic based NDT is adopted in this work to perform material testing using high frequency ultrasonic sound waves. Theses ultrasonic waves are able to penetrate the materials up to the depth of 5 meters that makes it more suitable for heavy armored vehicle inspection. The ultrasonic transducer probes with various sizes like 0°, 45°, 60° and 90° probes to generate ultrasonic pattern in different orientations. The ultrasonic-transducer probes are basically made of single Piezo Electric Crystal (PEC). The pattern Of ultrasonic data will be varied with respect to the frequency of PEC. The Epoch-6LT is integrated through Wi-Fi module to the IoT environment. The robotics based hardware mechanism has been embedded in this work to automate the material scanning process. Robo Scanning over the materials avoids stress of manual scanning and- it can scan the material without break; Before scanning the materials, they are fabricated to allow the ultrasonic waves to.pass through easily. Also, the movement of robotic arm could be controlled by embedding software code in the Micro-controller unit of IoT. Thus, the salient features of ultrasonic signals like the frequency and amplitude of forward signal, defect signal and backward signal are stored in digital form in the cloud databases and accessed for the Micro controller: of I6T for further processing. The Machine Learning.and"Deep Learning algorithms have been applied.to identify the various" geometrical properties of defects like defect type, defect size and defect position accurately with outliers. Also, the various stakeholders of the system have been integrated with IoT using RFID sensors to improve the communication with external world. The mail and message services have been included under the notification framework to providealert messages to the stakeholders of this system to.service or replace.the material components before causing serious issues for the critical components of Industry, Aerospace and Military. This invention will save more time and energy without data loss and repeated examinations for characterizing the material defects. No. of Pages : 24 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26960

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028647 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DESIGN OF EXPERIMENTAL SETUP FOR ROTARY UNDERWATER LASER TEXTURING ON PISTON RING FOR AUTOMOTIVE APPLICATION

:G11B (71)Name of Applicant : (51) International classification 5/84 1)V.EZHIL MARAN (31) Priority Document No :NA Address of Applicant :DEPT. OF MECHANICAL (32) Priority Date :NA ENGINEERING, MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE, SIVAKASI, TAMILNADU, INIDA 626005. Tamil (86) International Application No :NA Nadu India Filing Date :NA 2)DHINESH.B (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)V.EZHIL MARAN Filing Date :NA 2)DHINESH.B

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Abstract The present invention provides a way to form a textured surface on the piston ring surface (coated or plain) using pulsed laser source in an underwater environment. With this arrangement, a periodic array of an evenly distributed textured surface on the piston rings can be formed without thermal defects such as cracks and heat-affected zone on the textured surface. The present invention prevents the atmospheric metallic vapor pollution during laser-assisted surface texturing, particularly on chromium coated piston ring surface. Due to the presence of water around the coated piston ring sample, the atmospheric metallic vapor pollution formed during laser irradiation can be dispersed within the water. No. of Pages : 14 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26961

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028648 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : FERTILISER SCATTERING MACHINE

:A01C (71)Name of Applicant : (51) International classification 17/00 1)J.NAGARAJAN (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGINEERING, MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE, MEPCO NAGAR, MEPCO ENGINEERING (86) International Application No :NA PO,SIVAKASI, VIRUDHUNAGAR,TAMIL NADU, INDIA- Filing Date :NA 626005. Tamil Nadu India (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)J.NAGARAJAN

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Abstract Fertilization is an important feature in crop cultivation. The obstacles we face while fertilization is that the chemicals in fertilizers are harmful to human beings. When a farmer throws the fertilizer, its chemicals gets into their nails and causes skin diseases. Drones used for fertilization are not as efficient as they are costly and uniform distribution of fertilizer is not achieved. As a measure we have designed a fertilizer scattering machine not only for safety but also it reduces fertilization time and man power. By this uniform distribution of fertilizers is possible. It"s based on the principle of centrifugal force. Fertilizer is loaded on a hopper and then by gravity it is made to fall in rotating disc. The fertilizers on falling on the disc is scattered by means of centrifugal force. The disc has vanes which is curved in shape. These vanes help in effective uniform throwing of fertilizers. Rotating disc is connected to a motor through a shaft. The speed of the motor can be varied by means of a Varian which helps us covering majority of the field. Opening present on scattering portion is about 180 degrees and remaining 180 degrees is closed by movable slider to avoid scattering of fertilizer on operator. Slider can be moved to change direction of scattering. Wheels are attached to the legs for fertilizing fields other than paddy as it has swampy field. No. of Pages : 8 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26962

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028649 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ALTERNATE SLOTTED ELIPTICAL PIN FIN AND CONVERGING PLATES ASSEMBLY FOR HEAT TRANSFER ENHANCEMENT

:F28F (71)Name of Applicant : (51) International classification 3/02 1)S.P.ASOK (31) Priority Document No :NA Address of Applicant :DEPT.OF MECHANICAL ENGG. (32) Priority Date :NA MEPCO SCHLENK ENGINEERING COLLEGE, SIVAKASI, (33) Name of priority country :NA TAMIL NADU, INDIA-626005. Tamil Nadu India (86) International Application No :NA 2)S.LIONEL BENESTION Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)S.P.ASOK (61) Patent of Addition to Application Number :NA 2)S.LIONEL BENESTION

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT The present invention discloses the arrangement of slotted elliptical and converging plate pin fins to reduce the gas turbine blade temperature. To achieve high thermal efficiency and high power output, the modern gas turbine engines are designed to operate at inlet temperature of 1800°C - 2000°C which is far beyond the allowable material limit temperature of 900°C. So pin fin of different configurations are one of the effective cooling methods of gas turbine blades. The heat transfer characteristics with pin fin- converging plate combined improves the thermal performance of the system. The distribution of the velocity and turbulencelevel in the flow reveals the underlying mechanisms for the pressure loss and heat transfer characteristics in the channels. The Reynolds number for the proposed arrangement is in the range of 17281-195625. The proposed arrangement enhances the convective heat transfer about 1.5 times in the channel by creating vortex with minimum pressure loss in the range of 28.9 - 38.58 N/m2. No. of Pages : 8 No. of Claims : 1

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26963

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028650 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMPOSITE MATERIALS ROLLING EQUIPMENT

:B21B (71)Name of Applicant : (51) International classification 1/34 1)R.RAJKUMAR (31) Priority Document No :NA Address of Applicant :DEPT.OF MECHANICAL ENGG. (32) Priority Date :NA MEPCO SCHLENK ENGINEERING COLLEGE, MEPCO (33) Name of priority country :NA NAGAR, AMATHUR, SIVAKASI, VIRUDHUNAGAR (86) International Application No :NA DIST,TAMIL NADU, INDIA-626005. Tamil Nadu India Filing Date :NA 2)C.A.K.ARUMUGAN (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)R.RAJKUMAR Filing Date :NA 2)C.A.K.ARUMUGAN

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT Composite material is composed of at least two materials, which combine to give properties superior to those of the individual constituents. Hand lay-up technique is the simplest method of composite processing. The processing steps are quite simple. Reinforcement are placed at the surface of mould and then thermosetting polymer in liquid form is mixed with hardener thoroughly in suitable proportion poured onto the surface of reinforcement which is already placed in the mould. Second layer of reinforcement is then placed on the polymer surface and a roller is moved with a mild pressure on the reinforcement-polymer layer to remove any air trapped as well as the excess polymer present. Traditional composite rolling in done manually. Since the resin used is highly viscous, the product may stick to the roller. It . will create more problems in making of composite materials. There should be a suitable mechanism to get high quality product. In this project, the rolling mechanism is automated by using the roller mechanism. The roller is operated by a high torque motor. Due to automation better force distribution can be obtained. The roller is reciprocated by converting the rotary motion into reciprocating motion. Base frame is the foundation of the equipment whereas die placed above the base. In the die fibre and resins are mixed and the roller is made to roll over the surface of the composite. No. of Pages : 14 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26964

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028651 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : MULTI AGRO CUTTER

:C07K (71)Name of Applicant : (51) International classification 14/39 1)M.K.MARICHELVAM (31) Priority Document No :NA Address of Applicant :MEPCO SCHLENK ENGINEERING (32) Priority Date :NA COLLEGE, MEPCO NAGAR, SIVAKASI,TAMIL NADU, (33) Name of priority country :NA INDIA-626005. Tamil Nadu India (86) International Application No :NA 2)K.KANDAKODESSWARAN Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)M.K.MARICHELVAM (61) Patent of Addition to Application Number :NA 2)K.KANDAKODESSWARAN

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Abstract Conservation of energy and natural resources plays key role for better environmental sustainability. The heavy agro machineries that are used in various stages of agriculture becomes a threat to agriculture as these machineries make more wastages during harvesting and the complete harvesting is not possible. Moreover, the heavy machineries would also damage the crops in the nearby field. These heavy machineries also consists of more components which may need more production of spare parts. This will increase the energy consumption and hence environmental impact. A multi agro cutter is designed and fabricated to overcome these difficulties. The multi agro cutter may be effectively used for cutting heavy products such as wood, sugarcane, paddy, wheat, bamboo etc. No. of Pages : 7 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26965

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028652 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ANAEROBIC BAFFLED REACTOR SETUP WITH NANO SILVER COATED FILTER FOR WASTEWATER TREATMENT AT DAIRY INDUSTRY

:C02F (71)Name of Applicant : (51) International classification 3/28 1)Mr.N.NAGANAMBI (31) Priority Document No :NA Address of Applicant :DEPT OF MECH ENGG, MEPCO (32) Priority Date :NA SCHLENK ENGG COLLEGE, MEPCO ENGG COLLEGE(PO) (33) Name of priority country :NA ,SIVAKASI, VIRUDHUNAGAR,TAMIL NADU, INDIA- (86) International Application No :NA 626005. Tamil Nadu India Filing Date :NA 2)Dr.N.SELVAKUMAR (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Mr.N.NAGANAMBI Filing Date :NA 2)Dr.N.SELVAKUMAR

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Abstract Among the food industries, dairy industry is one of the most water consumption since it is a key processing medium. The effluent water discharged in large quantity affects the ecosystem. Environmental protection agencies have started a strict vigil for banning of wastewater discharge into the natural resources of water. By employing conventional treatment processes water reuse becomes more challenging due to wide fluctuations in industrial effluent quality for reusage. The advanced wastewater treatment, techniques dependents upon the characteristics to be obtained after secondary treatment to satisfy further usage. It has been shown that membrane technologies is convenient practiced to treat dairy wastewater for recovering of milk components and producing reusable water. Nanofiltration (NF) is an advanced membrane separation technique for water and waste water treatments as well as concentration/ separation of antibiotics. In dairy industry the treated water is used for irrigation purpose. This project water is treated for reusing in further process replacement of water in cooling towers or boilers, usage in floor cleaning etc. The prototype of waste water treatment setup has been made using nano membrane. Another major challenging in the waste water treatment was rejected water. Approximately one-third of the total quantity of waste water concentration was rejected and collected as rejected water. To faces this challenging anaerobic baffled reactor (ABR) study was initiated. ABR study was carried out in a lab scale and got result as expected. By investigating the parameter of waste water it was observed that consequential decreases in the values and get bio gas as a byproduct.- No. of Pages : 9 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26966

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028654 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : WORK CLAMPING FIXTURE FOR ENABLING MILLING OPERATION IN LATHE

:B62D (71)Name of Applicant : (51) International classification 25/16 1)Dr. N. VASIRAJA (31) Priority Document No :NA Address of Applicant :AP(SR.G)/MECH. MEPCO SCHLENK (32) Priority Date :NA ENGG. COLLEGE, MEPCO ENGG. COLLEGE PO, (33) Name of priority country :NA SIVAKASI, TAMIL NADU, INDIA-626001. Tamil Nadu India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Dr. N. VASIRAJA

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT The General Purpose Lathe is used to do the machining operation like turning, facing, step cutting, grooving and drilling on the rotating shaft. It means that the can do machining operation on the round shaft normally. But for creating keyway in the shaft, slot on the rectangular job, milling operation is preferred. A sophisticated milling machine is necessary for this operation. In small scale workshops, mostly Lathe machines are available. But, it is possible to carry out milling operation even in a Lathe by retrofitting the lathe suitably. It can avoid to purchase new milling machine or outsourcing the product for milling operation, It also increase the productivity. Accordingly, to overcome this problem, a new kind of fixture is designed to carryout milling operating in lathe. In present invention, it is used to clamp the flat work piece with aid of another product invention of a mandrel to hold the milling cutter which is attached to the chuck of the lathe. The fixture is attached to the carriage of the lathe, in order to get horizontal movement of the work piece and lead screw with circulate plate is used o enable the vertical movement of the work piece. Keywords - Milling operation, retrofitting of lathe, mandrel for milling cutter No. of Pages : 10 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26967

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028656 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : MULTI-PURPOSE MACHINE USING SINGLE POWER DRIVE

:H02M (71)Name of Applicant : (51) International classification 1/00 1)Dr.N.SELVAKUMAR (31) Priority Document No :NA Address of Applicant :DEPT OF MECH ENGG, MEPCO (32) Priority Date :NA SCHLENK ENGG COLLEGE, MEPCO ENGG COLLEGE(PO) (33) Name of priority country :NA ,SIVAKASI, VIRUDHUNAGAR,TAMIL NADU, INDIA- (86) International Application No :NA 626005. Tamil Nadu India Filing Date :NA 2)Mr.N.NAGANAMBI (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Dr.N.SELVAKUMAR Filing Date :NA 2)Mr.N.NAGANAMBI

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Abstract Multipurpose machine using single power drive is mainly carried out for the production based small scale industries in rural areas. We have developed a conceptual model of a machine which would be capable of performing different operations simultaneously like drilling, cutting, shaping and grinding and it is economically efficient. This machine performs multiple operations at the same time with desired speed/torque. Multipurpose machine is automatic in nature which is operated by motor and it is running with the help of electrical power source. It is based on the method of power transmission through gears and pulleys on a single shaft. No. of Pages : 10 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26968

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028657 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : GROUNDNUT POD STRIPPER

:A01F (71)Name of Applicant : (51) International classification 11/00 1)K. KANDAKODEESWARAN (31) Priority Document No :NA Address of Applicant :MEPCO SCHLENK ENGINEERING (32) Priority Date :NA COLLEGE, MEPCO NAGAR, SIVAKASI, TAMILNADU, (33) Name of priority country :NA INDIA-626005 Tamil Nadu India (86) International Application No :NA 2)M.K. MARICHELVAM Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)K. KANDAKODEESWARAN (61) Patent of Addition to Application Number :NA 2)M.K. MARICHELVAM

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Groundnuts have been utilized since the beginning of humankind. It is widely used for oil wealthy in oil and protein and has a high vitality esteem. Oil extraction from the groundnut is increasingly done at town in the greater part of the nations. Groundnut is normal and palatable thing and its oil is utilized as a cooking medium. Additionally the result groundnut cake after.oil extraction likewise contain 43 to 65 percent protein and 6 to 20 percent fat which is for the most part utilized as nourishment for cows and goats. At present there is an absence of specialists in the field of horticulture and because of more expense in reaping. Because of the above components, ranchers are not associated with groundnut development. The expelling of groundnut cases is a tedious procedure and cost costly. Temperature is extremely high at collecting time so individuals discovers hard to work. To beat these challenges groundnut thresher is utilized in groundnut case expelling process which limit the time and cost. No. of Pages : 8 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26969

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028658 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : REMOTELY OPERATED PICK AND PLACE ROBOT

:B25J (71)Name of Applicant : (51) International classification 11/00 1)DR. N. BOSE (31) Priority Document No :NA Address of Applicant :MEPCO SCHLENK ENGINEERING (32) Priority Date :NA COLLEGE, MEPCO NAGAR, SIVAKASI, TAMIL NADU, (33) Name of priority country :NA INDIA, 626005 Tamil Nadu India (86) International Application No :NA 2)MR. D. JONES JOSEPH JEBARAJ Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)DR. N. BOSE (61) Patent of Addition to Application Number :NA 2)MR. D. JONES JOSEPH JEBARAJ

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Pick and Place Robots can handle automated packaging works. The anthropomorphic characteristics of these robots make them flexible for use in industries. They are presently being used to perform operations like robotic welding, automated assembly lines etc. These robots have limited to no locomotion capabilities which limits their use in material transport system. The present invention talks about a remotely operated pick and place robot which can be used for several operations like material transport in material handling systems, handling of hazardous chemicals and radioactive systems, The invention talks about providing mobility to the pick and place robots and hence to increase the level of industrial automation. The robot is controlled remotely with the aid of a computer connected to the network. The operator controls the computer with the help of the software installed in it. The instructions to be carried out are transferred to the robot through wireless network (Wi-Fi). These instructions are processed by microcontroller which transfers digital signal data to the motor driver. The motor drivers amplify the digital data to be fed to the motors. The motors provide the necessary actuation. No. of Pages : 9 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26970

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028668 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ENHANCING THE HEAT TRANSFER RATE OF SPECIALLY DESIGNED SHELL AND TUBE HEAT EXCHANGER BY PROVIDING DIMPLED SURFACE ALONG WITH HYBRID NANOFLUID

:B82Y (71)Name of Applicant : (51) International classification 30/00 1)SELVAN P (31) Priority Document No :NA Address of Applicant :MEPCO SCHLENK ENGINEERING (32) Priority Date :NA COLLEGE, MEPCO NAGAR, SIVAKASI, TAMIL NADU, (33) Name of priority country :NA INDIA-626005 Tamil Nadu India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)SELVAN P

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A heat exchanger is a heat transfer device that exchanges heat between two or more process fluids. Many types of heat exchangers have been developed for use in steam power plants, chemical processing plants, building heat and air conditioning systems, transportation power systems, and refrigeration units. The Shell and Tube Heat Exchangers are most commonly used in industries. The shell-and-tube heat exchanger which is the majority type of liquid-to-liquid heat exchanger is used as feed water cooler in process industries, refineries, and chemical industries. The performance and effectiveness of heat exchanger is improved by 23% using the novel hybrid nanofluid (AhCb-SiC) by providing dimpled surface morphology. No. of Pages : 9 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26971

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028669 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DESIGN AND DEVELOPMENT OF EFFECTIVE WASTE HEAT RECOVERY SYSTEM

:F01N (71)Name of Applicant : (51) International classification 5/02 1)DR. DHINESH.B (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGINEERING, MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE, SIVAKASI, TAMIL NADU, INDIA-626005 Tamil (86) International Application No :NA Nadu India Filing Date :NA 2)DR. EZHILMARAN.V (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)DR. DHINESH.B Filing Date :NA 2)DR. EZHILMARAN.V

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The investigation brings out the process to derive power from the temperature difference of hot junction and cold junction in the model. The better result is achieved when the TEGs are in series connection and have an opposite flow of coolant in the cold junction. Compared to the traditional power generation systems, thermoelectric generation (TEG) has its special characteristics such as simple structure, high reliability, operate without any noise or vibration and without waste generation and it can be implemented in the electric vehicles and IC engines for waste heat recovery. No. of Pages : 16 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26972

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028671 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DESIGN AND FABRICATION OF IMPROVED HEAT EXTRACTION SET-UP FOR BATTERY

:H01L (71)Name of Applicant : (51) International classification 27/11 1)R.SARAVANA SATHYA PRABHAHAR (31) Priority Document No :NA Address of Applicant :MEPCO SCHLENK ENGINEERING (32) Priority Date :NA COLLEGE MEPCO ENGG COLLEGE P.O, SIVAKASI, (33) Name of priority country :NA TAMILNADU, INDIA, 626005 Tamil Nadu India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)R.SARAVANA SATHYA PRABHAHAR

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Increased vehicle population together with improved life style of people creates more emission adding additional burden to the environment. This makes researchers around the world logo for alternatives which are free from this burden. One such alternative that the entire vehicle manufacturers across the globe are bringing now is the eco-friendly electric vehicles. Though the use of electric vehicles like cars, rail, submarines, air-craft, etc are already existing, but their usage is limited. The trend of electric vehicles is increasing day by day and researches involving methods to increase the efficiency of it is also remarkably improved. One of the main problems an electric vehicle encountering is the charging and discharging of batteries. A Battery is a device consisting of one or more electrochemical cells that convert chemical energy to electrical energy. This criterion is heavily dependent on the temperature of the battery. It is known that the battery performance drops when operated at high temperatures as well as when operated at low temperatures. It needs an optimum temperature to attain maximum efficiency. This fabricated device is intended to achieve proper balancing of the battery temperature by providing an efficient cooling system. In this set-up, the tubes employed for extracting the heat generated by the cells of the battery are made to pass through both sides of the individual cells. Thus the heat will be efficiently carried away by the coolant passing inside the tube. In addition to the tubes, the cells are enclosed in corrugated copper sheets. These corrugated copper sheets promote both conductive and convective heat transfer. The corrugated copper sheets are brazed with copper tubes. This would help the system to extract more heat at a much faster rate when compared with the existing system The arrangements included in this device, will reduce the temperature by enhancing the heat transfer rate. This device will improve the life of the battery, since the life span of a battery is greatly influenced by the temperature to which the cell is subjected to. Further, it also reduces the number of battery e-waste as the requirement of the new batteries will be less, thereby reducing the burden to the environment. No. of Pages : 5 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26973

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028672 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DESIGN OF SEMI - AUTOMATIC PAPER TUBE MAKING MACHINE FOR FIRE CRACKERS

:B21D (71)Name of Applicant : (51) International classification 51/36 1)P.BALAMURUGAN (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGINEERING MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE MEPCO NAGAR, AMATHUR, SIVAKASI, (86) International Application No :NA TAMILNADU, INDIA-626005 Tamil Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)P.BALAMURUGAN

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The manufacturing of crackers, making of paper tubes plays an important role and on homemade crackers paper is rolled by means of hand which causes fatigue to the workers. Moreover, the machines that are already available in the industries but they are very expensive and suitable for small scale industries. The semi-automatic paper tube making machine overcome these problems by integrating the mechanical and electronic functions thereby reducing the cost, time and fatigue caused to the workers. In this machine, initially the paper from the bundle is passed through a glue roller and then it is passed between the feed rollers. Then, the required length of the paper is cut by using pneumatic operation. For rolling the paper tubes, a pair of pneumatic cylinders holding the folding setup is extended, so that the paper is rolled perfectly. The rollers which are rotated by means of a motor and pneumatic cylinders that are actuated by solenoid valves, are controlled by using"an Arduino." Then using the series of cutters the paper tube is cut into small tubes and it is collected by manually. The semi - automatic parallel paper tube making machine for the firework leads, the paper tubes can be finished at one time; the production work efficiency can be improved; the human input can be reduced; the labour cost can be reduced; and firework products can be produced in batches in a standardized way. No. of Pages : 12 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26974

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028673 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SMART ENERGY HARVESTERS FOR RAILWAY BRIDGES

:H04L (71)Name of Applicant : (51) International classification 12/28 1)A. VASANTHANATHAN (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGINEERING MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE MEPCO ENGG. COLLEGE POST, SIVAKASI- (86) International Application No :NA 626005, TAMILNADU, INDIA Tamil Nadu India Filing Date :NA 2)P. NAGARAJ (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)A. VASANTHANATHAN Filing Date :NA 2)P. NAGARAJ

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Electricity is the need for everything. Without electricity one can"t imagine even a single minute. Electricity into day"s world serves as the prime source for operation from a small watch to voluptuous industries. Our world is in need of electricity for the hour. Till today there are several means of producing electricity as thermal power plants, nuclear power plants and several other renewable sources like Solar, Hydroelectric power generation, Wind mills, Fuel cells etc.; Even though with the presence of such renewable resources these are environment dependent and can"t be rely at every situation. To eliminate this void, an idea of generating electricity with the help of piezoelectric materials has been invented. No. of Pages : 9 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26975

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028675 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : INTEGRATED FRICTION DRILLING CUM FORM TAPPING TOOL FOR SHEET METAL APPLICATIONS

:A61K (71)Name of Applicant : (51) International classification 36/88 1)DR. N. RAJESH JESUDOSS HYNES (31) Priority Document No :NA Address of Applicant :ASSOCIATE PROFESSOR (32) Priority Date :NA DEPARTMENT OF MECHANICAL ENGINEERING MEPCO (33) Name of priority country :NA SCHLENK ENGINEERING COLLEGE MEPCO ENGG. (86) International Application No :NA COLLEGE POST, SIVAKASI-626005, TAMILNADU, INDIA Filing Date :NA Tamil Nadu India (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)DR. N. RAJESH JESUDOSS HYNES Filing Date :NA 2)MR. R. SANKARANARAYANAN (62) Divisional to Application Number :NA 3)MR. P. VIJAYABASKAR

Filing Date :NA

(57) Abstract : The invention discloses a threaded hole forming tool which is working on the basis of frictional heat generation between the tool and the work piece. A conical part (3) with distinctive features helps in the balancing of torque acting over the surface of the tool during the drilling operation. It also helps for the easy engagement of the form tapping part and its advancement overcoming the increase in the torque requirement due to the cooling and contraction of the work material. The straight flutes adjacent to threaded portion (2) in the form tapping part helps in the slipping and levelling of the unnecessary materials which will hinder the tool advancement by offering greater resistance to rotation and hence higher torque during the forming operation. The integrated tool comprising friction drilling (3) and form tapping parts (4) makes possible to have different material combination for friction drilling and form tapping parts while performing the combined hole forming operation. The combination of additional guiding assembly and grub screw (12) supports the friction drilling of medium hardness materials. No. of Pages : 30 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26976

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028676 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : FABRICATION OF CAR BUMPER USING HYBRID NATURAL FIBER REINFORCED POLYMER COMPOSITE

:C08J (71)Name of Applicant : (51) International classification 5/04 1)DR. R. RAJKUMAR (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGINEERING MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE MEPCO ENGG. COLLEGE POST, SIVAKASI, (86) International Application No :NA VIRUDHUNAGAR (DT), TAMILNADU, INDIA-626005 Tamil Filing Date :NA Nadu India (87) International Publication No : NA 2)MR. R. SANKARANARAYANAN (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)DR. R. RAJKUMAR (62) Divisional to Application Number :NA 2)MR. R. SANKARANARAYANAN

Filing Date :NA

(57) Abstract : In recent years, natural fibers have been used more frequently for their lower weight to strength ratio and low cost. Natural fibres are bio-degradable, renewable, environmental friendjy, abundant, and cheap with acceptable mechanical properties. Synthetic fibers such as glass, carbon and aramids are being used for more than two decades. In this work, sisal/kenaf fiber reinforced with epoxy matrix hybrid composite (HC) was manufactured and their mechanical properties were compared with the sisal fiber composite (SFC) and - kenaf fiber composite (KFC). Water absorption was carried out to find the moisture absorption capacity of the manufactured HC. HC provides better properties when . compared with SFC and KFC. Hybrid composite is suitable for light weight automobile applications. No. of Pages : 9 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26977

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028677 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : LOW-SPEED FRICTION RIVETING MACHINE

:B21J (71)Name of Applicant : (51) International classification 15/32 1)DR. N. RAJESH JESUDOSS HYNES (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGINEERING MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE MEPCO ENGG. COLLEGE POST, SIVAKASI, (86) International Application No :NA TAMILNADU, INDIA-626005 Tamil Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)DR. N. RAJESH JESUDOSS HYNES (61) Patent of Addition to Application Number :NA 2)MR. N.J.VIGNESH

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention discloses a Low-speed Friction Riveting Machine used to join a polymer material (18) with a metallic rivet (19). Joining of polymer materials with that of the metallic structures such as aluminium is a quite" challenging task. This could be overcome by - this low-speed friction riveting process. The spindle drive (14) encloses a rotating chuck (15) in which the metallic rivet (19) is inserted. The tailstock drive (3) consists of a four jaw chuck (2) which is used to hold the polymer material (18) to be low- speed friction riveted. At the time of joining, the spindle drive (14) rotates at a fixed rpm and the tailstock drive (3) is used to apply the axial pressure by means of moving linearly along the bed structure (27). As the polymer material (18) comes in contact with the metallic rivet (19), the friction heating of the joint interface takes place and it starts converting the polymer material into a highly viscous fluid. Then on further increasing the axial pressure, helps in the easier penetration of the metallic rivet (19) inside the polymer material (18). Once the necessary depth is reached, the rotary spindle (14) is stopped and the components are allowed to solidify. Finally, after complete solidification, the joining process is achieved. No. of Pages : 17 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26978

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028678 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ALUMINIUM MATRIX COMPOSITE CASTING DEVICE

:B22D (71)Name of Applicant : (51) International classification 19/16 1)DR.N. RAJESH JESUDOSS HYNES (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHNANICAL (32) Priority Date :NA ENGINEERING, MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE (POST), SIVAKASI, TAMILNADU, INDIA-626005 (86) International Application No :NA Tamil Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)DR.N. RAJESH JESUDOSS HYNES (61) Patent of Addition to Application Number :NA 2)S.RAJA Filing Date :NA 3)R.SANKARANARAYANAN

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Aluminium matrix composite casting device eases the manufacturing of aluminium matrix based composites with multiple advantages. The present casting device possesses the provision of receiving the molten casting output from stir casting machine through pouring spout (1). The respective incorporating facility enables to manufacture hollow cylindrical parts with various combinations of aluminium matrix and reinforcement materials. The height adjustment (4) in the device facilitates to accommodate different machines for its casting input requirements. Moreover, hinge (5) provision makes the device to operate both at vertical and horizontal directions, an additional advantage for flexible applications. Even smaller castings (2 kg) are possible with centrifugal casting chamber (9) for producing small hollow cylindrical parts with aluminium matrix composites. The additional online and preheating (12) facilities enhances the process for producing quality product with reduced cycle time. These innovative incorporations in the device add several facilities within a process setup to cover the maximum application requirements and quantum of applications could increase with these added innovations. No. of Pages : 14 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26979

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028679 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DEVELOPMENT OF TWO-WHEELER MUDGUARD USING COIR-POLYESTER COMPOSITES

:B62D (71)Name of Applicant : (51) International classification 25/16 1)DR. R. RAJKUMAR (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGINEERING MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE MEPCO ENGG. COLLEGE (P.O), (86) International Application No :NA VIRUDHUNAGAR, TAMILNADU, INDIA-626005 Tamil Nadu Filing Date :NA India (87) International Publication No : NA 2)MR. M. SANKARANARAYANAN (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)DR. R. RAJKUMAR (62) Divisional to Application Number :NA 2)MR. M. SANKARANARAYANAN

Filing Date :NA

(57) Abstract : Natural fiber-reinforced polymer composite are utilized in a wide range for both in essential exploration and furthermore for the engineering purpose. They can be effortlessly recycled; and they are less expensive in cost. These composites are having minimum density and less expense as well as good mechanical properties make them a successful because of easy renewability and accessibility of raw materials. Mechanical properties of coir fibre reinforced polyester composites were evaluated. Composites were fabricated with the amount of coir fibre up to 50% wt. the fibres were alkaline treated by using NaOH solution at room temperature for 72 hours. This treatment was to improve mechanical of coir fibre reinforced polyester composites. Because this treatment enhancing the fibre and matrix adhesion. Fabrication was done by using simple hand layup technique and compression moulding machine was used. Length of the coir fibre was 20-25 mm. In this work effect of alkaline treated coir fibre reinforced polyester composites were studied. The samples are subjected to Tensile, Flexural and Impact Tests, which are cut to required size as per ASTM standards. The test results of various samples are compared and found that sample with 40% coir fibre provides better values in all mechanical properties. The mechanical properties of alkaline treated coir polyester composites were higher than the untreated coir polyester. Finally automobile component Mudguard, has been fabricated by using hand layup technique. Fabricated automobile component has high tensile strength, flexural strength and impact strength than the existing plastic material component. No. of Pages : 7 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26980

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028680 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DESIGN AND DEVELOPMENT OF MANUALLY OPERATED WEED REMOVER IN FARMING

:G06F (71)Name of Applicant : (51) International classification 3/06 1)MR. M. SANKARANARAYANAN (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGINEERING MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE, SIVAKASI MEPCO ENGG. COLLEGE (P.O), (86) International Application No :NA VIRUDHUNAGAR,TAMILNADU, INDIA-626005 Tamil Nadu Filing Date :NA India (87) International Publication No : NA 2)DR. R. RAJKUMAR (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)MR. M. SANKARANARAYANAN (62) Divisional to Application Number :NA 2)DR. R. RAJKUMAR

Filing Date :NA

(57) Abstract : Weed control is one of the most difficult tasks on an agricultural farm. Three methods of weed control are commonly known in agriculture. These are mechanical, chemical and biological control. Mechanical weed control is easily adopted by farmers once they get convinced by its advantages. Mechanical weeding not only uproots the weed between the plant rows but also keeps ¢ the soil loose, ensuring better soil aeration and water intake capability. Weeding by mechanical devices reduces labour cost and saves time. Various types of mechanical weeders have been developed. In traditional weed removing methods, more labours are required. Thus, the time ■ required to cover over a large area is increased. Other methods such as chemical weeding cause health problems in the food chain. No. of Pages : 10 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26981

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028681 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DESIGN AND FABRICATION OF GROUNDNUT AND PEANUT SHELLING MACHINE

:A23N (71)Name of Applicant : (51) International classification 5/01 1)MANOJ KUMAR G, AP/MECH (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHNICAL (32) Priority Date :NA ENGINEERING, MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE, SIVAKASI-626005 Tamil Nadu India (86) International Application No :NA 2)UTHRANARAYAN C, AP(SR.G)/MECH Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)MANOJ KUMAR G, AP/MECH (61) Patent of Addition to Application Number :NA 2)UTHRANARAYAN C, AP(SR.G)/MECH

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The process of shelling the peanut from its crop is tedious when it is done with manual labor without any machinery. At first the crop is uprooted from the ground and is separated from its leaves and roots. After the removal of the leaves and root the groundnut is to be separated from the plant. These processes are mostly done by the farmers on their self with the help of various labors and small machinery if needed. The groundnut is then sent on to the market for the sales purpose where it is been known as peanut. The shelling of the peanut becomes the next task from the groundnut. The nut and pod are mostly separated with hands by breaking the pod and taking away the nut. The pod is thrown out and the nut is used for . consumption. There are many discomforts, time consumption and wastage of labor during the whole process. When the process is done with the help of machinery the whole crop being the input with its leaves and root gets converted into shelled peanut as the output. Many combined steps are reduced to a single step. This process is carried out with our groundnut and peanut shelling machine. At first peanut (whole plant) is taken and inserted in the separator. After this process of separation, groundnut is separated from peanut and carried to hopper where the shelling process begins. In shelling process, the groundnut seed is removed from its pod by impact and compression action. After shelling process, the groundnut seed and pods undergo screening where the groundnut is separated from pods and collected in a tray. When the nuts and pods are obtained separately the nuts are taken for consumption whereas the pods are used for other agricultural processes such as natural fertilizers for the soil. The farmer themselves can operate the machinery and gain huge amount of time and money with the help of this machine. No. of Pages : 16 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26982

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028682 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : LOW COST AUTOMATED MACHINE FOR CRICKET BAT CONDITIONING

:A63B (71)Name of Applicant : (51) International classification 59/55 1)DR. T. PRABAHARAN (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGINEERING MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE, VIRUDHUNAGAR,TAMILNADU, INDIA-626005 (86) International Application No :NA Tamil Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)DR. T. PRABAHARAN

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : New cricket bats need to be cknocked-in" prior to use. The process is used to be done manually where a person repeatedly hits the bats with wooden mallets. Now a days it is done by using machines automatically. But these machines are quite expensive. Our project aims to fabricate a low cost machine which could perform the knocking in of the bat both automatically and semi-automatically. The design of a cricket bat conditioning machine takes the form of a cradle in which a cricket bat can be secured horizontally and then traversed at constant speeds in two mutually perpendicular directions while at the same time being struck with constant force by a wooden mallet head. The traverses are driven by lead screws, the motors of which can be driven manually as well as automatically. The wooden mallet head is attached to a pneumatic cylinder"s piston which is raised up and lowered by a crank mechanism driven by an A.C motor. The mallet hits the bat every time it is lowered and the pneumatic cylinder provides cushioning effect. The no. of counts to hit the bat is set in the arduino which keeps track of the hits using a vibration sensor fixed at the handle of bat. After knocking in for set count, the machine is turned off by arduino. Hence, the cricket bat after knocking-in is ready for use. The low cost cricket bat conditioning machine is successfully designed, modelled, manufactured and tested for its effective use. No. of Pages : 13 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26983

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028683 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : OPTIMAL POSITION OF LI-ION BATTERY CASE FOR FUTURE CARS

:H01M (71)Name of Applicant : (51) International classification 10/05 1)A. VASANTHANATHAN (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGINEERING MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE, MEPCO ENGG COLLEGE POST SIVAKASI- (86) International Application No :NA 626005,TAMILNADU, INDIA Tamil Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)A. VASANTHANATHAN

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Safety of Li-ion battery during an accident is always been a great concern. However, the solution is implemented the accidents are never less that what have been expected. The driver of the vehicle is a grave danger of fire and explosion of"the vehicle which should be overviewed. The results and outcome of the present invention is that the position of the battery that have been mentioned can minimize the outcome of an accident. But the minimizing of accident is one of the major impacts on the Electric cars. No. of Pages : 11 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26984

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028684 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DYEING PROCESS FOR OBTAINING SHADES IN COTTON FABRIC USING TWO DIFFERENT NATURAL DYE SOURCES APPLIED IN SPECIFIC SEQUENCE

:A61K (71)Name of Applicant : (51) International classification 38/00 1)M. ANANDHAN (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGINEERING MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE, MEPCO ENGINEERING COLLEGE (PO), (86) International Application No :NA VIRUDHUNAGAR DISTRICT,TAMILNADU, INDIA-626005 Filing Date :NA Tamil Nadu India (87) International Publication No : NA 2)T.PRABHAHARAN (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)M. ANANDHAN (62) Divisional to Application Number :NA 2)T.PRABHAHARAN

Filing Date :NA

(57) Abstract : Dyeing is an important step in the textile processing which is both water intensive and uses synthetic dyes polluting the environment during the processes. The environmental pollution can be reduced by using natural dyes instead of synthetic dyes. The problem in the natural dye is its colour fastness property, availability of dyes in large scale and repeatability of shades. These problems can be reduced by using more than one dye and using variety of dye sources. In this invention a process is described which used two natural dye sources to change the colour shade. By using the given process sequence for dyeing the fabrics can be dyed to get light shade of brown with a greenish tinge. No. of Pages : 11 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26985

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028685 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : RUNNING OF VAPOUR ABSORPTION REFRIGERATION SYSTEM USING AUTOMOBILE EXHAUST GAS

:H03H (71)Name of Applicant : (51) International classification 9/05 1)K.MAHAESWARAN (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGG., MEPCO SCHLENK ENGINEERING COLLEGE , (33) Name of priority country :NA VIRUDHUNAGAR, TAMILNADU, INDIA-626005. Tamil Nadu (86) International Application No :NA India Filing Date :NA 2)DR.T.PRABHARAN (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)K.MAHAESWARAN Filing Date :NA 2)DR.T.PRABHARAN

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Vapour compression system observes more electrical energy. To avoid it we should see some other alternatives. So the best alternative to overcome vapour compression system is Vapour Absorption Refrigeration System (VAR System). Because this system runs by waste heat generated as exhaust in the automobiles (low grade energy). Vapour absorption system is our future in refrigeration field. But the only thing is that we should develop it more efficiently. In this invention we designed, constructed and tested the vapour absorption system with Di Methyl Formamide (DMF)-Tetra Ffluoro Ethane combination (DMF-R134a) .Usually ammonia-water, libr- water combination are mostly used and this is replaced by DMF. DMF is commonly called universal solvent. The boiling point of DMF is 153° C. R134a has low boiling point that is -26°C, but. in ammonia-water absorber system boiling point of water is 100°C. DMF has low evaporative rate compare with water so in generator DMF evaporation is very low compare with water. So that we select this combination to develop the Vapour Absorption Refrigeration System. No. of Pages : 7 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26986

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028686 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : HAND OPERATED DUAL SIDE AIR-COMPRESSOR MECHANISM

:H01L (71)Name of Applicant : (51) International classification 23/538 1)R.MEHESWARAN SR.PROF/MECH (31) Priority Document No :NA Address of Applicant :MEPCO SCHLENK ENGINEERING (32) Priority Date :NA COLLEGE, SIVAKASI TAMILNADU ,INDIA- 626005. Tamil (33) Name of priority country :NA Nadu India (86) International Application No :NA 2)S.KARTHIKEYAN AP/MECH Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)R.MEHESWARAN SR.PROF/MECH (61) Patent of Addition to Application Number :NA 2)S.KARTHIKEYAN AP/MECH

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The designed compressor has been developed to improve efficiency of the existing compressor. Now-a-days there is a hike in need of compressed air. Presently in most of the industrial units, they use piston compressors instead of rotary compressors. The usage of these compressors increase the cost of maintenance and makes it difficult to obtain more profit. This can be effectively reduced by using two compressors in Scotch-Yoke mechanism. The shaft is used to transmit power from electric motor to the Scotch Yoke mechanism. From there, it is transferred to the two pistons rods of the two respective compressors. It provides the advantage of using return stroke power effectively, thereby increasing the efficiency of the entire setup. It also provides more outlet compressed air, thereby achieving more output. Since, in a normal compressor the power is supplied only during the forward stroke, it creates an imbalance during the return or reverse stroke. But, in a dual side air compressor this problem is rectified, because equal power is transmitted during both strokes of the piston. No. of Pages : 6 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26987

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028687 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : NANO MAGNESIUM HYDROXIDE AND MONO AMMONIUM PHOSPHATE DRY CHEMICAL POWDER CONTAINED BALL FIRE EXTINGUISHER

:C08K (71)Name of Applicant : (51) International classification 3/22 1)AZHAGURAJAN (31) Priority Document No :NA Address of Applicant :MEPCO SCHELNK ENGG (32) Priority Date :NA COLLEGE, SIVAKASI , TAMILNADU, INDIA-626005. Tamil (33) Name of priority country :NA Nadu India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)AZHAGURAJAN

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Fire extinguish or suppress is one of the safety measures to protect materials and environment when fire accidents occur in Industries or anywhere. The combustion of any material depends on the availability of fuel, Oxygen, heat and chain reactions. To extinguish the fire by separating the fuel is called starvation, cut the heat by cooling and remove the Oxygen by inerting. Generally the fire extinguishing agents are.water, Carbon dioxide, foam and dry chemical powders (DCP). Among these, DCP plays a vital role in extinguish the fire. Many chemicals like Mono Ammonium Phosphate, Bicarbonates, Magnesium Hydroxide etc., are being used. Many researchers tested each chemical by altering their particle size. Conventionally, powders are expelled manually from fire extinguisher around the flame. Another type of extinguisher called ball fire extinguisher, which is thrown into the fire and exploded, hence expelled the contained . powder. In this invention, a ball fire extinguisher was used for effective discharge of powders, 85 % of mono ammonium phosphate (around 5 um) is added with 15 % superfine Mg(OH)2 for quick decomposition and hence arresting free radicals. When a ball is thrown into fire, these powder of new composition will be expelled from the exploded ball. The enhancing factors like high specific area, discharge from the root of the fire for effective radical arrest, change the composition for early decompose will increase the fire suppression efficiency. The new composition with a novel discharge type by a ball fire extinguisher is the new invention. No. of Pages : 10 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26988

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028689 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : 3D PRINTED LATTICE CYLINDRICAL COMPOSITE SHELL STRUCTURE

:F03D (71)Name of Applicant : (51) International classification 1/06 1)J.ANISH JAFRIN THILAK (31) Priority Document No :NA Address of Applicant :DEPT OF MECH ENGG, MEPCO (32) Priority Date :NA SCHLENK ENGINEERING COLLEGE,MEPCO NAGAR, (33) Name of priority country :NA AMATHUR,VIRUDHUNAGAR,TAMILNADU,INDIA- 626005. (86) International Application No :NA Tamil Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)J.ANISH JAFRIN THILAK

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : High strength to weight ratio, directional strength and stiffness are the significant factors forcing polymer composites into the aerospace, marine and automotive industries. Stiffened cylindrical shells are the major components of aerospace structures. Additive Manufacturing techniques like fused filament fabrication of polymers are on the verge from a pure prototyping technique to producing small lot sizes, as it enables the production of highly complex components without a mold. In this present invention polyamide granules reinforced with short carbon fibers were manufactured by means of a 3D printing fused filament fabrication process. Then the lattice cylindrical shape was fabricated by using the fused filament fabrication process. The effect of geometric parameters of the lattice cylindrical shell structures like rib thickness, helix angle of the rib, number of helical and circumferential ribs on the compressive strength and buckling behavior was investigated by means of compression tests using Universal testing Machine. The results show the dependence of rib thickness on buckling strength of the shell structure. Furthermore, the lattice shell structure characterized by the circumferential ribs running exactly along the center of helical rib of a unit cell exhibits the highest load carrying capacity. To conclude, the analysis of the lattice cylindrical shell after testing showed that failure is caused by global buckling failure mode which in turn put forward that the structure slenderness is higher than that of the ribs. No. of Pages : 7 No. of Claims : 1

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26989

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028690 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : LOW COST SAND SEPARATOR MACHINE

:H01M (71)Name of Applicant : (51) International classification 2/16 1)BALA MANIKANDAN.C (31) Priority Document No :NA Address of Applicant :DEPARTMENT OF MECHANICAL (32) Priority Date :NA ENGINEERING, MEPCO SCHLENK ENGINEERING (33) Name of priority country :NA COLLEGE, SIVAKASI, TAMILNADU, INDIA- 626005. Tamil (86) International Application No :NA Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)BALA MANIKANDAN.C

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The design and construction of the automated sand separator is the modified version of conventional sand separator. The arrangement consists of a frame, sieve plate, wiper motor, roller wheels, rods and aluminium sheet. All the components were supported by the frame. Frame is made up of stainless steel to provide rigidity. Wiper motor is incorporated for the automatic separation function. Sieve plate does the function of separating sand of particular sand grain size. Six roller wheels are incorporated between the sieve plate and the frame. The purpose of roller wheels is to ease the reciprocatory motion of the sieve plate, when coupled with, the wiper motor through link arrangement. The link arrangement consists of two rods, which serves the function of converting the rotary motion from wiper motor to the reciprocation of the sieve plate. When sand is discharged and falls over the sieve plate, due to the reciprocatory motion of the sieve plate a particular sand size depends on the sieve size was allowed to be fall through it. Aluminium plate is arranged in taper manner at the bottom of the sieve plate. It allows the separated sand to reach the bottom of the frame for further processing. The separated sand then reaches the aluminium plate by gravity. Due to the taper arrangement of the plate, the separated sand is deposited at the bottom, which will be collected for mixing with concrete. Automated sand sieving machine improves productivity and reduces the human fatigue. It can be used in small construction field for making concrete. No. of Pages : 9 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26990

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028692 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BANANA TREE STEM EXTRACTOR

:G06K (71)Name of Applicant : (51) International classification 9/00 1)B.VIJAYARAGAVAN (31) Priority Document No :NA Address of Applicant :DEPT OF MECH ENGG, MEPCO (32) Priority Date :NA SCHLENK ENGG COLLEGE, MEPCO NAGAR, AMATHUR, (33) Name of priority country :NA SIVAKASI, VIRUDHUNAGAR, TAMILNADU, INDIA - (86) International Application No :NA 626005. Tamil Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)B.VIJAYARAGAVAN

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Banana is one of the world"s most important fruit crops that are widely cultivated in tropical Banana is one of the world"s most important fruit crops that are widely cultivated in tropical countries for its wide applications in food industry and its enormous by- products with high medicinal value. The main objective of the proposed work is to extract the banana stem from banana tree in a cost- effective way since banana stem is an important part in the banana tree. The motivation for the proposed work is the excess time and human effort required to extract the banana stem in the existing manual method of banana stem extraction. Since the availability of agricultural workers is alarmingly decreasing, the profit of the farmers is decreased due to high wages. Hence the proposed work is planned to reduce the time consumed for extracting the banana stem from tree, and also reduce the human effort involved in the banana stem extraction. A cut piece of banana tree with outer fibrous shell is placed in the setup containing knife and the ram. Application of external force to the handle connected to the long arm pushes the cut piece against the knife provided in the setup. The knife cuts the outer fibrous shell of the stem into four halves and removes the same with its arrangement. The stem is then separated from the outer shell and is collected through the guide cylinder in the base of the set up. UXkfcountries for its wide applications in food industry and its enormous by-products with high medicinal value. The main objective of the proposed work is to extract the banana stem from banana tree in a cost-effective way since banana stem is an important part in the banana tree. The motivation for the proposed work is the excess time and human effort required to extract the banana stem in the existing manual method of banana stem extraction. Since the availability of agricultural workers is alarmingly decreasing, the profit of the farmers is decreased due to high wages. Hence the proposed work is planned to reduce the time consumed for extracting the banana stem from tree, and also reduce the human effort involved in the banana stem extraction. A cut piece of banana tree with outer fibrous shell is placed in the setup containing knife and the ram. Application of external force to the handle connected to the long arm pushes the cut piece against the knife provided in the setup. The knife cuts the outer fibrous shell of the stem into four halves and removes the same with its arrangement. The stem is then separated from the outer shell and is collected through the guide cylinder in the base of the set up. No. of Pages : 10 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26991

(12) PATENT APPLICATION PUBLICATION (21) Application No.202041028693 A (19) INDIA (22) Date of filing of Application :06/07/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DESIGN AND FABRICATION OF INCINERATOR FOR HANDLING SLAUGHTER HOUSE MEAT WASTE

:C02F (71)Name of Applicant : (51) International classification 103/22 1)THANIKACHALAM.J (31) Priority Document No :NA Address of Applicant :AS1,STAFF QUATERS, MEPCO (32) Priority Date :NA SCHLENK ENGINEERING COLLEGE, SIVAKASI, (33) Name of priority country :NA VIRUDHUNAGAR, TAMILNADU, INDIA -626005. Tamil (86) International Application No :NA Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)THANIKACHALAM.J

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Waste management are the process, activities and actions that are required to manage the waste from generation to its final disposal. This includes the collection of waste, transportation of waste, treatment of waste and disposal of waste along with monitoring and regulation of the waste management process. In the modern technology, waste management field meets enormous growth but there is lack in the area of waste management from slaughter house and meat shop. Normally these shops dumping their waste in the road sides and water bodies that creates high level of environmental problems such as pollution of underground water level, creates diseases to the living organisms by the growth of bacteria and infectious organisms from that meat waste. Moreover this meat waste generates the unpleasant odour to the surroundings, the fertility of the land may barren because of improper pit filling, land filling, individual burial, composting, incineration and autoclaving processes. This project work mainly focuses on the Environmental safety in order to minimize the Land pollution, Water pollution and Air pollution. The design and fabrication of incinerator involves the Heating arrangements as electric heater, smoke and particle collector arrangement, pressurizing equipment for boosting up the exhaust gases and utilizing the by-product obtained from the incineration process into useful applications. The design and fabrication of this waste management incinerator for handling slaughter house meat waste is hopeful to minimize the " effects of adverse pollution to the environment. Keywords - Incineration, Waste Management, Particle and Smoke Collector Equipment, Pressurizing devices, pollution control. No. of Pages : 5 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26992

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031014832 A (19) INDIA (22) Date of filing of Application :03/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : VACCINE FOR NOVEL CORONA VIRUS

(51) International classification :A61K39/00 (71)Name of Applicant : (31) Priority Document No :NA 1)KANISHK SINHA (32) Priority Date :NA Address of Applicant :122 BIDHANPALLY KOLKATA (33) Name of priority country :NA WEST BENGAL 700084 (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)KANISHK SINHA

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : According to one aspect of the invention a composition is provided which may be used for treating Novel Coronavirus patients. The composition comprises (a) cytokine-expressing, proliferation incompetent, whole Novel Coronavirus cells; (b) an anti-PD-1 antibody that specifically binds to human Programmed Death 1 (PD-I); and (c) a TLR (toll like receptor) agonist; wherein the whole Novel Coronavirus cells are formulated with the TLR agonist. No. of Pages : 22 No. of Claims : 28

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26993

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031022850 A (19) INDIA (22) Date of filing of Application :01/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A NOVEL FARMING ENABLING SOLAR PANELS (FESP) FOR HIGHER EFFICIENCY,PRESERVING SOIL HEALTH AND SUSTAINABILITY

(51) International classification :H02S20/00 (71)Name of Applicant : (31) Priority Document No :NA 1)ML GREEN PROJECTS PVT LTD (32) Priority Date :NA Address of Applicant :A-4-20,VAISHNOMATA GREEN (33) Name of priority country :NA HOMES, BOTONDA, BHUBANESWAR-751002, ODISHA. (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)UDIT BONDIA

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : FESP (Farming Enabling Solar Panels) is a technology with increased energy generating efficiency and features to balance the surface temperature of Solar panels in Sunny days, to avoid any mishap, Farming Enabling Solar Panels facilitate live farming below the panels, by allowing light and rain water to pass through it to fall on the ground. FESP mainly utilizes the unused blank spaces called as Voids as shown in fig (4)between the solar cells to allow the light and water to pass through it, also it is equipped with a transparent photo diffusing Layer in place of the back sheet. The Photo diffusing layer as shown in diffuses the incident light and makes the entire layer glow, this enhances the energy generating efficiency of the bifacial solar cells, similarly the non-reflective layer as shown in fig (1), (2), (3) is used for increasing the light absorption, upper and lower encapsulation layer as shown fig (1), (2), (3) is used to protect the solar panels from external environment and FESP modules use perforated holes as shown in fig (1), (2), (3), (4) , (6). FESP aims to solve the issue of conversion of agriculture land into desert due to the installation of solar panels for a long period of time. The advantages of FESP are soil health is conserved and preserved , farming enabled below the lands where solar modules are installed.,Higher productivity of the solar panels, Balances the temperature level of the solar panels, Promote animal grazing adding to benefits of livelihood to poor farmers. No. of Pages : 14 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26994

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031022971 A (19) INDIA (22) Date of filing of Application :01/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : HYBRID SOLAR TRACKING SYSTEM FOR A SOLAR COLLECTOR AND METHOD THEREOF

(51) International classification :H02S20/32 (71)Name of Applicant : (31) Priority Document No :NA 1)Indian Institute of Technology Patna (32) Priority Date :NA Address of Applicant :Bihta, Patna, Bihar - 801103, India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)Akashkumar Ambalal Patel Filing Date :NA 2)Manabendra Pathak (87) International Publication No : NA 3)Ahmad Ali

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method for hybrid solar tracking system for a solar collector (110) is provided. The hybrid solar tracking system works on either open loop tracking mode or closed loop tracking mode depending on the solar radiation intensity conditions. The system includes a luminosity sensor (102) which is configured to acquire solar radiation intensity. A Global Positioning System (GPS) sensor (104), embedded in a microcontroller (106), is configured to acquire a plurality of data. The system further includes one or more Light Dependent Resistor (LDR) sensors 108 configured to determine position of solar rays. The microcontroller is configured to determine one or more tracking modes based on the solar radiation intensity acquired from the luminosity sensor (102), the plurality of data acquired from the GPS sensor 104 and the position of solar rays determined by the LDR sensor (108). Further, the microcontroller (106) is configured to direct the movement of the solar collector (110) through a DC motor (112) and the solar collector (110) is configured to collect the maximum amount of solar rays based on the directed movement of the solar collector (110). No. of Pages : 32 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26995

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031023018 A (19) INDIA (22) Date of filing of Application :02/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ANTI - CORONA VACCINE

(51) International classification :A61K39/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Dr. S. BALARAJU DORA (32) Priority Date :NA Address of Applicant :496/B, NAGESWAR TANGI, (33) Name of priority country :NA BHUBANESWAR,DIST:KHURDA, STATE:ODISHA,PIN- (86) International Application No :NA 751002, INDIA Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)Dr. S. BALARAJU DORA

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relate to anti corona vaccine which is actively works for several periods or more in human body without any side effect. By way of which, if virus enter into the non-infected human body then it is destroy over there. Hence, the chances of infection are zero. Also the vaccine increases immunity of the person. After being infected by corona virus, disorder found in breathing, illness, fever, cough and cold, etc. but the preventive vaccine control such symptoms; as the anti-corona vaccine ingredient work against the symptoms. The vaccine control such infection and disorder in human cell. The influenza, pneumonia, etc. are gets inactive. As result of which the virus get inactive/ destroy in human cell. Hence it protect from infection from Corona Virus. No. of Pages : 10 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26996

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031023410 A (19) INDIA (22) Date of filing of Application :04/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS FOR ISOLATION, PURIFICATION AND CLONING OF PIERISIN 5- NAD+ DEPENDENT DNA-ADP-RIBOSYLTRANSFERASE AND APPPARATUS THEREOF

(51) International classification :C12N15/00 (71)Name of Applicant : (31) Priority Document No :NA 1)SARATHBABU SUBBARAYAN (32) Priority Date :NA Address of Applicant :DEPARTMENT OF (33) Name of priority country :NA BIOTECHNOLOGY, MIZORAM UNIVERVISY, AIZAWL- (86) International Application No :NA 796004,INDIA Filing Date :NA 2)SENTHIL KUMAR NACHIMUTHU (87) International Publication No : NA 3)SELVI SUBRAMANIAN (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)SARATHBABU SUBBARAYAN (62) Divisional to Application Number :NA 2)SENTHIL KUMAR NACHIMUTHU Filing Date :NA 3)SELVI SUBRAMANIAN

(57) Abstract : The present invention relates to NAD+ dependent DNA-ADP-ribosyltransferase, the enzyme which ribosylates the host cell DNA using NAD+. This protein, Pierisin-5 was expressed in Spodoptera frugiperda insect cell line Sf-21, as well as the DNA molecule encoding that enzyme. The NAD+ molecule can be incorporated in a DNA expression system and a host for recombinant production of NAD+ dependent DNA-ADP-ribosyltransferase. The isolated NAD+ dependent DNA-ADP-ribosyltransferase protein or polypeptide of the present invention can be combined with a Pharmaceutically-acceptable carrier or used alone for administration to mammals, particularly humans, for preventing cell growth and/or uncontrolled cell growth in cells which are causes target-specific cytotoxicity. No. of Pages : 33 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26997

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031024066 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COVID19 PROTECTED ROOM: DISINFECTING ROOM AIR USING MACHINE LEARNING SYSTEM

(71)Name of Applicant : 1)DR. ANAND MOHAN Address of Applicant :FORMERLY FELLOW DST.GOVT OF INDIA AT LN MITHILA UNIVERSITY, KAMESHWARANAGAR, DARBHANGA, BIHAR -846004,

INDIA. E-Mail: [email protected] (51) International classification :A01N25/00 2)DR. PRATICHI SINGH (31) Priority Document No :NA 3)MAYURESH PANDURANG NIGADE (32) Priority Date :NA 4)Dr. D. MURALI (PROFESSOR OF CSE) (33) Name of priority country :NA 5)DR. RAHUL MADHUKAR PETHE (ASSISTANT (86) International Application No :NA PROFESSOR) Filing Date :NA 6)DR. RAJINDER SINGH SODHI (ASSOCIATE (87) International Publication No : NA PROFESSOR) (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)DR. ANAND MOHAN (62) Divisional to Application Number :NA 2)DR. PRATICHI SINGH Filing Date :NA 3)MAYURESH PANDURANG NIGADE 4)Dr. D. MURALI (PROFESSOR OF CSE) 5)DR. RAHUL MADHUKAR PETHE (ASSISTANT PROFESSOR) 6)DR. RAJINDER SINGH SODHI (ASSOCIATE PROFESSOR)

(57) Abstract : My Invention “Covid19 Protected Room” is a system for disinfecting a room having first, second and third air inlets and an air intake control using machine learning assembly to prefer advanced level control air flow into the enclosure through the first, second and third air inlets. The Air flows between the exterior and interior of the enclosure through the second, third air inlet passes through a Covid19 killer filter assembly. The invention also includes an air dispersion outlet having a fan that draws air into the invention through the first, second and third air inlets and forces air out of the invention. The chemical dispersion assembly generates a disinfecting clean fog relative to the fan. The controller system (Machine learning Programming) controls the air intake control assembly to disperse the disinfecting clean fog into the room, and subsequently draw the disinfecting clean fog from the room and through the Covid19 killer filter assembly. The invention controlling programing display the panel then user can select an air fragrancing mode of operation subsequent to selecting the air purification mode of operation. The disinfecting substance filter assembly comprises a disinfecting substance filter that neutralizes or captures disinfecting substance passing there through and varying the surface cleaning mode of operation in response to signals sent from the user interface operatively connected to the control system. The antimicrobial dispersion assembly configured to dispense an antimicrobial coating substance relative to the air dispersion outlet, wherein the system controller is further configured to open the first air inlet and activate the fan to disperse the antimicrobial coating substance into the room. No. of Pages : 22 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26998

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031024141 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A METHOD AND SYSTEM FOR PROVIDING THE INTERLINK BETWEEN CORPORATE GOVERNANCE AND FIRM PERFORMANCE

(51) International classification :G06Q30/00 (71)Name of Applicant : (31) Priority Document No :NA 1)ARKA KUMAR DAS MOHAPATRA (32) Priority Date :NA Address of Applicant :Professor of Business Administration, (33) Name of priority country :NA Sambalpur University, Jyoti Vihar, Burla, Sambalpur-768019, (86) International Application No :NA Odisha (India) Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)ARKA KUMAR DAS MOHAPATRA

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention discloses a method and system for providing the interlink between the corporate governance and firm performance (100). The corporate governance, measured in terms of a plurality of parameters, such as, but not limited to, Board Structure, Audit Committee, Shareholders’ Grievances, Remuneration Committee, Nomination Committee and Disclosure Practices, has a positive effect on the firm’s performance expressed in terms of a plurality of parameters, such as, but not limited to, Tobin’s Q, Return on Assets (ROA), Earnings Before Depreciation Interest Tax and Amortization (EBDITA), Earnings Before Interest and Tax (EBIT), Net Income (NI) and Earnings per Share (EPS). No. of Pages : 27 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 26999

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031024424 A (19) INDIA (22) Date of filing of Application :10/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD OF MANAGEMENT FOR TELECOMMUNICATION RESOURCES USING CLOUD COMPUTING

(71)Name of Applicant : 1)Chinmaya Ranjan Pattanaik Address of Applicant :Associate Professor,Department of (51) International classification :G06F9/00 Computer Science and Engineering, Ajay Binay Institute of (31) Priority Document No :NA Technology, Cuttack, Odisha, India (32) Priority Date :NA 2)Dr. Anuradha.S.G (33) Name of priority country :NA 3)Udit Mamodiya (86) International Application No :NA 4)Dr. Lokesh Jindal Filing Date :NA 5)Amit Yadav (87) International Publication No : NA 6)Dr. K.Vinayagar (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)Chinmaya Ranjan Pattanaik (62) Divisional to Application Number :NA 2)Dr. Anuradha.S.G Filing Date :NA 3)Udit Mamodiya

4)Dr. Lokesh Jindal 5)Amit Yadav 6)Dr. K.Vinayagar

(57) Abstract : The present invention is related to a computer implemented method for management of telecommunication resources using cloud computing.The objective of the present invention is to solve the problems in the prior art related to adequacies in technologies in management of the telecommunication resources. The present method provides cloud computing based effective and secure management of the telecommunication resource in an online working environment. No. of Pages : 22 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27000

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031024655 A (19) INDIA (22) Date of filing of Application :12/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : THREE IN ONE PORTABLE AIR CONDITIONER COMBINING AIR CONDITIONING + AIR FILTRATION + WATER FILTRATION

(51) International classification :B60H1/00 (71)Name of Applicant : (31) Priority Document No :NA 1)NILOY GHOSH (32) Priority Date :NA Address of Applicant :DSN AEROSPACE CONSULTANTS (33) Name of priority country :NA PVT. LTD. NILOY GHOSH HD PAL STREET (86) International Application No :NA SHANKHARIPARA PO- ICHAPUR NAWABGANJ DIST- 24 Filing Date :NA PARGANAS NORTH WEST BENGAL 743144 Mob: (87) International Publication No : NA 9008418527 (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)NILOY GHOSH (62) Divisional to Application Number :NA 2)KANIK PALODHI

Filing Date :NA

(57) Abstract : The invention is in line with the latest demand and need of air conditioning with air and water filtration. This machine is an all in one integrated solution for cooling and filtration of air and water. In view of the COVID-19 pandemic, a requirement has also surfaced to disinfect air in a closed enclosure, particularly, the quarantine units. The present machine comes with a technology for disinfecting a medium containing virus and at the same time offer a cooling solution. Highlights of invention: a) Portability and mobility: The size of modern cooling systems is shrinking by the day. Following that trend, our product is a compact air conditioner with dual duct for heat exchange with the atmosphere. The atmospheric air is brought in through one duct via a diffuser (Fig.3) for enhanced cooling of the condenser coils. The heated air is forced out to the atmosphere through a different duct. Though the machine is compact and portable, no compromise is made to the basic cooling architecture inside the machine. The shape of the machine is flexible and can very easily fit in a car for transportation to distant places, if need be. Installation is also simple and can very easily be performed by an ordinary user following the manual. b) Air Filtration: This product integrates the Air conditioner with an air filter unlike other products where these are separate entities. Five techniques are employed for air filtration as follows. 1. Basic filtration of atmospheric particulate matter of diameter of 2.5 µm or less with PM2.5 (particulate matter) mesh grids positioned before the evaporator coils. 2. Nano TiO2(Titanium oxide) based photo catalytic coating on a stainless steel/ Polymer mesh grid positioned between Evaporator cooling coils and inlet to the Evaporator volute casing. This is irradiated with a 20 watt UV-A LED light source. 3. Nano ZnO (Zinc oxide) based photo catalytic coating on a stainless steel/ Polymer mesh grid positioned between Evaporator cooling coils and inlet to the Evaporator volute casing. This mesh is separated from the TiO2 coated mesh with a gap of 5 mm. This is irradiated with the same 20 watt UV-A LED light source. 4. Direct contact with UV-C Light source (60 Watts) positioned in the duct mounted at the exit of the evaporator volute casing. 5. Cylindrical lens are positioned adjacent to the UV-C LED source to get a line of focused beam enhancing the capability of killing microbes manifolds. Multiple such cylindrical lenses are positioned around the UV-C light source to get 360 degree coverage. c) Water Filtration: There are four ways with which water filtration is employed in this machine. 1. The UV-C Light source (60 Watts) used earlier for air filtration is also used to filter water stored in the annular space between a hollow quartz cylinder and a hollow clay earthen pot. 2. Pre carbon Filter: it consists of Granular or Block Activated Carbon. These have very high surface area and remove contaminants through adsorption. 3. Sediment Filter: It can capture dirt, sand, and other larger particles in its net and cleanses the water.4. Reverse osmosis(RO) based filtration for reducing water TDS (Total dissolved solids content) d) Worm and worm gear based swinging mechanism for deflecting air to the room. A compact mechanism is developed as shown in Fig.9, to deflect the plates at any desired degrees with the help of worm and worm gear mechanism. The plate deflection would allow air to be thrown into the room at any desired angle. The mechanism is compact and occupies very less space. The deflection is achieved with the help of a stepper motor attached with the worm gear. No. of Pages : 29 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27001

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031024673 A (19) INDIA (22) Date of filing of Application :12/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SYSTEM AND METHOD FOR CAREER DEVELOPMENT

(51) International classification :F03G07/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Arka Kumar Das Mohapatra (32) Priority Date :NA Address of Applicant :Professor of Business Administration, (33) Name of priority country :NA Sambalpur University, Jyoti Vihar, Burla, Sambalpur-768019, (86) International Application No :NA Odisha. Filing Date :NA 2)Nameirakpam Chetana (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Arka Kumar Das Mohapatra Filing Date :NA 2)Nameirakpam Chetana

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention discloses a method and system for providing an effective and efficient career development interface, comprising the steps of: (I) developing a predetermined plurality of statements with categorized into two vis-ŕ -vis a plurality of career development practicing scores and a plurality of factors effecting career development practicing scores; (II) developing a content validation unit for the predetermined plurality of statements by using a plurality of predefined testing methods; (III) conducting and refining and selecting the predetermined plurality of statements from the total predetermined plurality of statements retained after the validation by the plurality of predefined testing methods; (IV) deleting and providing output of all the predetermined plurality of statements having a data value particularly less than a predetermined threshold value by using a predefined testing method. No. of Pages : 23 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27002

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031024943 A (19) INDIA (22) Date of filing of Application :13/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A BIO-PESTICIDE COMPOSITION BASED ON PEPPERMINT EXTRACT AND ITS PREPARATION METHOD THEREOF

(51) International classification :A01N63/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Centurion University of Technology & Management (32) Priority Date :NA (CUTM) (33) Name of priority country :NA Address of Applicant :At-Alluri Nagar Village, PO-R.Sitapur, (86) International Application No :NA Via-Uppalada, Paralakhemundi-761211, Gajapati District, Odisha, Filing Date :NA India. (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Preetha Bhadra

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure proposes a peppermint extract composition for the treatment of grey mould and microbial diseases in plants. The extract composition comprises pharmacophores such as menthone, menthofuran, beta pinen, and 1, 8 cineole that target endopolygalaturonases responsible for grey mould and microbial diseases in plants. The disclosure provides a peppermint extract composition for use as a potential biopesticide. The proposed composition provides a cost-effective drug with less harmful side effects for normal cells. Further, the composition aids to reduce the use of pesticides based on synthetic drugs. No. of Pages : 12 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27003

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031024944 A (19) INDIA (22) Date of filing of Application :13/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A BIOPESTICIDE COMPOSITION BASED ON BAEL EXTRACT AND ITS PREPARATION METHOD THEREOF

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A Biopesticide Composition based on Bael Extract and its Preparation Method thereof The present disclosure proposes a potential biopesticide based on bael extract. The extract comprises of pharmacophores such as aegeline, skimmianine(1), d-limonene, marmelosin, allocryptopine to target different genes responsible for aphids in plants. The bael extract composition comprises 15 to 25 percentage of aegeline, 15 to 25 percentage of skimmianine(1), 15 to 25 percentage of d-limonene, 15 to 25 percentage of marmelosin, and 15 to 25 percentage of allocryptopine. The biopesticide extract composition interrupts with the enzymatic pathway of aphids by targeting the enzymes responsible. The bael extract composition is a cost-effective biopesticide with less harmful side effects for normal cells. The proposed composition reduces the use of pesticides based on synthetic drugs. No. of Pages : 12 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27004

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031024945 A (19) INDIA (22) Date of filing of Application :13/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CUMIN EXTRACT BASED BIOPESTICIDE COMPOSITION

(51) International classification :A01N63/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Centurion University of Technology & Management (32) Priority Date :NA (CUTM) (33) Name of priority country :NA Address of Applicant :At-Alluri Nagar Village, PO-R. Sitapur, (86) International Application No :NA Via-Uppalada, Paralakhemundi-761211, Gajapati District, Odisha, Filing Date :NA India. (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Preetha Bhadra

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The proposed disclosure provides a therapeutically effective cumin extract based biopesticide composition for targeted gene therapy with proven pharmacological activities for the treatment of wilt disease. The formulation of cumin extract based biopesticide composition comprises of pharmacophores such as berberine, p-coumaric, saponins and 4-isopropylbenzoic acid. The cumin composition is formulated as natural drug for microbial diseases in plants without harmful side effects for normal cells. No. of Pages : 15 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27005

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031024946 A (19) INDIA (22) Date of filing of Application :13/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHI EXTRACT BASED BIOPESTICIDE COMPOSITION

(51) International classification :A01N63/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Centurion University of Technology & Management (32) Priority Date :NA (CUTM) (33) Name of priority country :NA Address of Applicant :At-Alluri Nagar Village, PO-R. Sitapur, (86) International Application No :NA Via-Uppalada, Paralakhemundi-761211, Gajapati District, Odisha, Filing Date :NA India. (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Preetha Bhadra

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The proposed disclosure provides a therapeutically effective methi extract based biopesticide composition for targeted gene therapy with proven pharmacological activities for the treatment of purple blotch disease. The formulation of methi extract based biopesticide composition comprises of pharmacophores such as trigoneline, trimentylcoumarin, carpaine, choline, methyl coumarin, and trigocoumarin. The methi composition is formulated as natural drug for microbial diseases without harmful side effects for normal cells. The composition helps to aid future medicine to be completely allied to the pharmacophores and reduces the usage of synthetic drugs. No. of Pages : 15 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27006

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031025563 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ENHANCED MACHINE LEARNING APPROACH FOR THE DETECTION OF IOT CYBER- ATTACKS INTHE SMART ENVIRONMENT

(71)Name of Applicant : 1)Mr.Vikash Kumar Agarwal, RTC Institute of Technology Address of Applicant :RTC Institute of Technology, Anandi, Ranchi Jharkahand India 2)Dr. U. RAHAMATHUNNISA, Vellore Institute of Technology 3)Dr. AKASH MOHANTY, Vellore Institute of Technology 4)Mr. K. SUDHAKAR, Ganadipathy Tulsi’s Jain Engineering College

5)Mr. S P Maniraj, SRM Institute of Science and (51) International classification :G06N5/00 Technology (31) Priority Document No :NA 6)Mrs. P.JAYALAKSHMI, SRM Institute of Science and (32) Priority Date :NA Technology (33) Name of priority country :NA 7)Mrs.D.CHITHRA, S.A. Engineering college (86) International Application No :NA 8)Dr D Udaya Suriya Rajkumar, Vemu Institute of Filing Date :NA Technology (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Mr.Vikash Kumar Agarwal, RTC Institute of Technology Filing Date :NA 2)Dr. U. RAHAMATHUNNISA, Vellore Institute of (62) Divisional to Application Number :NA Technology Filing Date :NA 3)Dr. AKASH MOHANTY, Vellore Institute of Technology 4)Mr. K. SUDHAKAR, Ganadipathy Tulsi’s Jain Engineering College 5)Mr. S P Maniraj, SRM Institute of Science and Technology 6)Mrs. P.JAYALAKSHMI, SRM Institute of Science and Technology 7)Mrs.D.CHITHRA, S.A. Engineering college 8)Dr D Udaya Suriya Rajkumar, Vemu Institute of Technology

(57) Abstract : Technique of Machine learning applied for Internet of Things is capable for interacting with other smart devices without human intervention. Internet of Things is the fastest developing area in the field of computation where extreme hostility is obtained in the internet environment but vulnerable to various cyber attacks. Resolving these problems is necessary for securing IoT such as detection of anomaly in the network. These cyber attacks even though cannot be avoided totally detection of attacks in an early stage is necessary. Storage capacity of IoT devices is low with low power consumption and higher security solution. Connection of IoT devices is done without any intervention of human. Deployment of machine learning algorithm is an intelligent method of security solution bases on the network. Quick evaluation is done by the machine learning algorithm in a effective way. BoT IoT data set is used for data evaluation. 7 different machine learning algorithms are implemented for obtaining high performance. No. of Pages : 12 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27007

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031025572 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : THERMAL SCREENING SYSTEM AND METHOD

(71)Name of Applicant : (51) International classification :G01K1/00 1)Dr.Pampa Sinha (31) Priority Document No :NA Address of Applicant :Assistant Professor-II, School of (32) Priority Date :NA Electrical Engineering, KIIT Deemed to be University, (33) Name of priority country :NA Bhubaneswar, Odisha 751024 India (86) International Application No :NA 2)Dr.Chitralekha Jena Filing Date :NA 3)Biswaranjan Acharya (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)S Ramana Kumar Joga Filing Date :NA 2)Dr.Pampa Sinha (62) Divisional to Application Number :NA 3)Dr.Chitralekha Jena Filing Date :NA 4)Biswaranjan Acharya

(57) Abstract : Disclosed is a thermal screening system (100) that includes a proximity sensor (102), infrared temperature sensors(104), microcontroller(106), a first notification device(108), a second notification device(110), a camera, and a rotatable camera(112). The proximity sensor (102) detects the presence of a human to transmit a detection signal. The proximity sensor (102) being positioned at an entry structure (502). The infrared temperature sensors (104) measure the temperature of the human on receiving the detection signal. The microcontroller (106) transmits a signal by comparing the temperature with a threshold temperature. The first notification device (108) initiates a first notification signal to indicate that the temperature measured by the infrared temperature sensors (104) is greater than the threshold temperature. The second notification device (110) initiates a second notification signal to indicate that the temperature measured by the infrared temperature sensors (104) is less than the threshold temperature. The camera captures face images of the human. The rotatable camera (112) captures movement images of the human. The most illustrative drawing: No. of Pages : 29 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27008

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031025886 A (19) INDIA (22) Date of filing of Application :19/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR RESERVING AND TRACKING BOATS

(71)Name of Applicant : (51) International classification :G08G1/00 1)CHILIKA DEVELOPMENT AUTHORITY (31) Priority Document No :NA Address of Applicant :493(P), Palaspalli - Lingaraj Vihar (32) Priority Date :NA Road , Pokhariput, Pokhriput Road, Bhubaneswar, Odisha 751020 (33) Name of priority country :NA India (86) International Application No :NA 2)SRI SUSANTA NANDA Filing Date :NA 3)DR.PRADIPTA RANJAN MUDULI (87) International Publication No : NA 4)DR.SAMRAT GOWDA (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)DR.PRADIPTA RANJAN MUDULI (62) Divisional to Application Number :NA 2)MR.SUJIT MISHRA Filing Date :NA 3)Mr. SITANATH BISWAS

4)Mr. BHUPESH DEKA

(57) Abstract : Disclosed is a system (100) for reserving and tracking boats. The system (100) includes a Global Positioning System (GPS) tracking device (104) and a server (106). The GPS tracking devices (104) are detachably attached with the boats configured to capture location data of the boats. The server (106) receives location data from GPS tracking devices (104). The server (106) includes an agent registration module (202), a user registration module (204), a connection module (206), a search module (208), and a boat booking module (210). The agent registration module (202) facilitates agents to register on an integrated platform. The user registration module (204) facilitates users to register on the integrated platform. The connection module (206) establishes a connection between the agent registration module (202) and the user registration module (204). The search module (208) facilitates the user to perform a search on the integrated platform to identify the boats for booking and the agents. The boat booking module (212) schedules and assigns the boats to the users. The most illustrative drawing: No. of Pages : 27 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27009

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031026076 A (19) INDIA (22) Date of filing of Application :20/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : THE AIR TIGHT PERSONAL PROTECTION COMPLETE SUIT WITH AIR PURIFICATION DEVICE

(51) International classification :A62B18/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Santanu Chattopadhyay (32) Priority Date :NA Address of Applicant :Village and Post Bergoom, Police (33) Name of priority country :NA Station. Gobardanga. District North 24 Parganas. PIN- 743263 (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Santanu Chattopadhyay

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a multiuse, unisex air tight personal protection complete suit with air purification device primarily consist a full body air tight suit with helmet and an electronic device to deliver pure, cool, uncontaminated air for inhalation and air circulation and expels the exhale and exhaust air as a clean air in the atmosphere. It can be used in all weather condition and pollution. It also comprises an electronic sanitization machine and electronic air blower to sanitize the personal protection suit of the user and other objects, raw vegetable, fruits, small room etc at any place, keeping the user safe and hygienic. It is design to ensure the facilities of all essential communication need and vital body information and other parameters safely. It ensures no flow of contaminated and polluted air and touch to any contaminated objects to the users and any contamination from the user to others. It is great for all the travellers, students, workers, employees, healthcare service providers, sick patients etc. It need no social distancing, it is safe and non hazardous. Hence the invention of this unique suit will facilitate the population to get backs to their work in safe and comfortable manner and give relief to the world from lockdown and economical depression. [00103] The air tight personal protection complete suit with air purification device suit consists following 9 main parts as described in Figure 1. 101 main electronic device with air purification system, 102 main connecting channel from electronic device to backside of the body suit, 103 helmet connected with the body suit and jacket, 104 jacket, upper part of the body suit, 105 pair of hand glove, 106 trouser the lower part of the body suit with belt, 107 pair of sock, 108 electronic sanitizer device and 109 the electronic air blower. No. of Pages : 27 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27010

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031026658 A (19) INDIA (22) Date of filing of Application :24/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A TIME WARP AND FREE ENERGY MACHINE.

(51) International classification :F03G3/00 (71)Name of Applicant : (31) Priority Document No :NA 1)GAUTAM NARAYAN BARUAH (32) Priority Date :NA Address of Applicant :NEMATI ROAD (N.G.ROAD), (33) Name of priority country :NA BORIGAON, HOUSE NO.264,WARD NO.19,HOLDING (86) International Application No :NA NO.702, JORHAT, ASSAM-785001 Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)GAUTAM NARAYAN BARUAH

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A Time Warp And Free Energy Machine where a support is claimed where an object can rest with part of it"s weight not supported even at the position of rest has (1) support for inclined plane simplified by use of a single square plate as in figure 1 (2) with it"s power increased by double cone wheels sliding down on modified inclined plane and aggregation of more machine units in a decreased area of space as in figure 2 (3) modified gyroscope frame for passengers to accomodate more persons without tilting on movement of the persons (5) automation of active balance simplified by electric motor driven propellars as in figure 3 then claimed in patent specification 201931019012. No. of Pages : 29 No. of Claims : 2

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27011

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031027644 A (19) INDIA (22) Date of filing of Application :29/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : EXTRACTION OF BIOACTIVE PRINCIPLES FROM OECOPHYLLA SMARAGDINA BASED ANTIBACTERIAL COMPOSITION

(51) International classification :A01N63/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Centurion University of Technology & Management (32) Priority Date :NA (CUTM) (33) Name of priority country :NA Address of Applicant :At-Alluri Nagar Village, PO-R.Sitapur, (86) International Application No :NA Via-Uppalada, Parlakhemundi-761211, Gajapati District, Odisha, Filing Date :NA India. (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Chinmaya Chidananda Behera Filing Date :NA 2)Dr.Amulyaratna Behera (62) Divisional to Application Number :NA 3)Dr.Priyanka Das Filing Date :NA 4)Mrs.Suchismeeta Behera

(57) Abstract : The proposed disclosure provides a therapeutically effective extraction of bioactive principles from n-hexane and methanolic extracts of Oecophylla Smaragdina based antibacterial composition and screened for binding affinities towards various bacterial proteins for the respective species. The composition has the capability of being used as anti-oxidant and anti-microbes. The composition enhances the inhibitory properties of extracted compounds when compared to available marketed compounds. No. of Pages : 24 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27012

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031027645 A (19) INDIA (22) Date of filing of Application :29/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : EXTRACTION OF BIOACTIVE PRINCIPLES FROM OECOPHYLLA SMARAGDINA BASED ANTICANCER COMPOSITION

(51) International classification :A61K36/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Centurion University of Technology & Management (32) Priority Date :NA (CUTM) (33) Name of priority country :NA Address of Applicant :At-Alluri Nagar Village, PO-R.Sitapur, (86) International Application No :NA Via-Uppalada, Parlakhemundi-761211, Gajapati District, Odisha, Filing Date :NA India. (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Chinmaya Chidananda Behera Filing Date :NA 2)Dr.Amulyaratna Behera (62) Divisional to Application Number :NA 3)Dr.Priyanka Das Filing Date :NA 4)Mrs.Suchismeeta Behera

(57) Abstract : The proposed disclosure provides a therapeutically effective extraction of bioactive principles from n-hexane and methanolic extracts of Oecophylla Smaragdina based anticancer composition and screened for binding affinities towards 4EKL, 3W32, and in vitro anticancer by inhibition of human cancer cell line growth. The composition has the capability of being used as anti-oxidant and anti- microbes. The composition enhances the inhibitory properties of extracted compounds when compared to available marketed compounds. No. of Pages : 20 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27013

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031027646 A (19) INDIA (22) Date of filing of Application :29/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : EXTRACTION OF BIOACTIVE PRINCIPLES FROM OECOPHYLLA SMARAGDINA BASED ANTI-FUNGAL COMPOSITION

(51) International classification :A61K36/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Centurion University of Technology & Management (32) Priority Date :NA (CUTM) (33) Name of priority country :NA Address of Applicant :At-Alluri Nagar Village, PO-R.Sitapur, (86) International Application No :NA Via-Uppalada, Parlakhemundi-761211, Gajapati District, Odisha, Filing Date :NA India. (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Chinmaya Chidananda Behera Filing Date :NA 2)Dr.Amulyaratna Behera (62) Divisional to Application Number :NA 3)Mr.Suman Kumar Mekap Filing Date :NA 4)Mrs.Suchismeeta Behera

(57) Abstract : The proposed disclosure provides a therapeutically effective extraction of bioactive principles from n-hexane and methanolic extracts of Oecophylla Smaragdina based anti-fungal composition and screened for binding affinities towards various fungal proteins for the respective species. The composition has the capability of being used as anti-oxidant and anti-microbes. The composition enhances the inhibitory properties of extracted compounds when compared to available marketed compounds. No. of Pages : 21 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27014

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031027647 A (19) INDIA (22) Date of filing of Application :29/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : EXTRACTION OF BIOACTIVE PRINCIPLES FROM OECOPHYLLA SMARAGDINA BASED MULTI TARGETING ANTI-SARS COMPOSITION

(51) International classification :A61K36/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Centurion University of Technology & Management (32) Priority Date :NA (CUTM) (33) Name of priority country :NA Address of Applicant :At-Alluri Nagar Village, PO-R.Sitapur, (86) International Application No :NA Via-Uppalada, Parlakhemundi-761211, Gajapati District, Odisha, Filing Date :NA India. (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Chinmaya Chidananda Behera Filing Date :NA 2)Dr.Amulyaratna Behera (62) Divisional to Application Number :NA 3)Dr.Gurudutta Pattnaik Filing Date :NA 4)Mrs.Suchismita Behera

(57) Abstract : The proposed disclosure provides a therapeutically effective extraction of bioactive principles from n-hexane and methanolic extracts of Oecophylla Smaragdina based multi-targeting anti-SARS composition and screened for binding affinities towards various Severe Acute Respiratory Syndrome Coronavirus-2 (SARS CoV-2) proteins for the respective species. The composition has the capability of being used as anti-oxidant and anti-microbes. The composition enhances the inhibition of the replication and multiplication of virus in the host cells when compared to presently repurposed drug molecules for the disease. No. of Pages : 22 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27015

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031027660 A (19) INDIA (22) Date of filing of Application :30/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMPACT SEMI-AUTOMATIC PAPER PEN AND PENCIL MAKING MACHINE

(71)Name of Applicant : (51) International classification :B43K29/00 1)Centurion University of Technology & Management (31) Priority Document No :NA (CUTM) (32) Priority Date :NA Address of Applicant :At-Alluri Nagar Village, PO-R.Sitapur, (33) Name of priority country :NA Via-Uppalada, Parlakhemundi-761211, Gajapati District, Odisha, (86) International Application No :NA India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)Amiya Singh (61) Patent of Addition to Application Number :NA 2)Prem Shankar Pandey Filing Date :NA 3)Ahmed Raza (62) Divisional to Application Number :NA 4)Jamaluddin Khan Filing Date :NA 5)Rezuwan Khan

(57) Abstract : The present disclosure proposes a compact semi-automatic paper pen and pencil making machine that reuses waste paper to roll and produce eco-friendly pens and pencils. The paper pen and pencil making machine 1S00 comprises a mounting base 101, an idle axle 102 fixed on one side of the mounting base 101, a driving axle 103 fixed on the other side of the mounting base 101 and connected to the idle axle 102 through a conveyor belt 104, a motor 105 coupled to the driving axle 103, an upper pressure plate 106a fixed on top of the mounting base 101 above the conveyor belt 104 and a lower pressure plate 106b below the conveyor belt 104, plurality of screw and spring adjustment units 107 configured on either side of the pressure plates 106a and 106b to fasten them to the mounting base 101. The machine is of simple design that consumes less power and lower maintenance. The machine aids to make pencils or pens with easier and simple process that takes only few steps. Thus, the proposed paper pen and pencil making machine is lightweight, occupies less space, and is portable. No. of Pages : 18 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27016

(12) PATENT APPLICATION PUBLICATION (21) Application No.202031027661 A (19) INDIA (22) Date of filing of Application :30/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : EXTRACTION OF BIOACTIVE PRINCIPLES FROM OECOPHYLLA SMARAGDINA BASED ANTI-DIABETIC COMPOSITION

(51) International classification :A61K45/00 (71)Name of Applicant : (31) Priority Document No :NA 1)Centurion University of Technology & Management (32) Priority Date :NA (CUTM) (33) Name of priority country :NA Address of Applicant :At-Alluri Nagar Village, PO-R. Sitapur, (86) International Application No :NA Via-Uppalada, Paralakhemundi-761211, Gajapati District, Odisha, Filing Date :NA India (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)Chinmaya Chidananda Behera Filing Date :NA 2)Dr.Amulyaratna Behera (62) Divisional to Application Number :NA 3)Mr.Suman Kumar Mekap Filing Date :NA 4)Mrs.Suchismeeta Behera

(57) Abstract : The proposed disclosure provides a therapeutically effective extraction of bioactive principles from n-hexane and methanolic extracts of Oecophylla Smaragdina based and screened for binding affinities towards human Peroxisome proliferator-activated receptor gamma for the respective species. The composition has the capability of being used as anti-oxidant and anti-microbes. The composition enhances the inhibitory properties of extracted compounds when compared to available marketed compounds. No. of Pages : 24 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27017

Publication After 18 Months:

The following Patent Applications have been published under Section 11A (3) of The Patents (Amendment) Act, 2005. Any Person may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents (Amendment) Act, 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:

(12) PATENT APPLICATION PUBLICATION (21) Application No.1333/DEL/2003 A (19) INDIA (22) Date of filing of Application :29/10/2003 (43) Publication Date : 17/07/2020

(54) Title of the invention : "SINGLE-PASS LASER WELDING METHOD OF A T ASSEMBLY OF METALLIC PARTS."

:B23K (71)Name of Applicant : (51) International classification 26/24 1)SNECMA MOTEURS (31) Priority Document No :02 13914 Address of Applicant :2, BOULEVARD DU GENERAL (32) Priority Date :07/11/2002 MARTIAL VALLIN, 75015 PARIS, FRANCE. France (33) Name of priority country :France (72)Name of Inventor : (86) International Application No :NA 1)HERVE LAUNAIS Filing Date :NA 2)THIERRY FLESCH (87) International Publication No :NA 3)DOMINIQUE MIGNOT (61) Patent of Addition to Application Number :NA 4)MICHEL ALLOUARD

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The method is used to attach the various parts of "T" assembly using a single laser welding pass from the outside of the "T" assembly. Welding is done with a bifocal welding head (20) 5 the two axes (21) of which are parallel to a surface of the part forming the "T" stem (10), the weld being made along the entire length of the assembly. To be used when manufacturing vanes for a turbo jet fan duct. 10 Figure 1.

No. of Pages : 10 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27018

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911000939 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : TWO STAGE CMOS OPERATIONAL AMPLIFIER FOR MULTIPLE SYSTEM-ON-CHIP APPLICATION AT NANO SCALE

:H03F0003450000, (71)Name of Applicant : H03F0001080000, 1)Swami Vivekanand Subharti University (51) International classification H03K0019003000, Address of Applicant :Subhartipuram, NH-58, Delhi- H03L0005000000, Haridwar, Meerut Bypass Road Meerut Uttar Pradesh India Uttar H03K0019000000 Pradesh India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Vishwas Mishra (33) Name of priority country :NA 2)Divya Mishra (86) International Application No :NA 3)Neha Verma

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to the ultra-low-power low-voltage two stage CMOS operational amplifier for multiple system-on-chip application. The ultra-low-power low-voltage two stage CMOS operational amplifier for multiple system-on-chip application comprise of an input circuit, an output circuit, an operational amplifier core circuit, and at least one pair auxiliary circuit. The operation amplifier core circuit comprise of a first stage gain circuit, a second stage gain circuit, a compensation unit, and a bias circuit unit. The first stage gain circuit receives input from the input circuit and amplify the same signal. The same amplified signal are receives by the second stage gain circuit and amplify it which give high amplification of the input signals. The bias circuit unit and compensation unit are implement to achieve closed loop stability, phase margin, UGB and also controlling the leakage current.

No. of Pages : 18 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27019

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911000976 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : LIFTING SYSTEM

:E02F0009220000, (71)Name of Applicant : B25J0009140000, 1)SINGH, Jagjit (51) International classification F04C0015060000, Address of Applicant :82/2a Gautam Nagar, New Delhi- H02K0005220000, 110049 Delhi India F15B0011220000 (72)Name of Inventor : (31) Priority Document No :NA 1)SINGH, Jagjit

(57) Abstract : A lifting system is disclosed. The system includes a movement assembly (20), a hook assembly (30) and a motor pump assembly (10). The movement assembly (20) includes a central rotor (20a), a mechanical arm (20b), a first and second hydraulic actuators (20cl, 20c2) and electric actuator (20d). The hydraulic actuators (20cl, 20c2) cause vertical movement of the mechanical arm (20b) while the electric actuator (20d) causes rotational movement of the mechanical arm (20b). The hook assembly (30) includes a hook (30a) for securing an object(s) from a surface and to place them in/out of a vehicle. The motor pump assembly (10) includes a controller (lOd) which maintains a predefined pressure of the pressurized fluid inside the first and second hydraulic actuators (20cl, 20c2).

No. of Pages : 23 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27020

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001006 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : HEATSINK-LESS INVERTER WITH BRASS JUMPERS FOR HEAT DISSIPATION

:H05K0003340000, (71)Name of Applicant : H05K0001110000, 1)Luminous Power Technologies Pvt. Ltd. (51) International classification H05K0003220000, Address of Applicant :Plot No. 150, Sector 44, Gurgaon H05K0001020000, 122003, Haryana, India Haryana India H05K0001180000 (72)Name of Inventor : (31) Priority Document No :NA 1)KUMAR, Sanjeev (32) Priority Date :NA 2)BHATNAGAR, Atul

(57) Abstract : The present invention relates to a heatsink-less inverter which comprises a printed circuit board (1) enclosed with a housing. A plurality of surface mount device (SMD) metal-oxide-semiconductor-field-effect transistor (MoSFET) (2) are mounted on contact pads in the printed circuit board. A plurality of drain wire entries (3) on which drain wires are mounted on drain contact pads in the printed circuit board (1). A plurality of brass jumper members (4) are attached to the contact pads in the printed circuit board (1). Each of the brass jumper members (4) is placed in close proximity to the SMD MoSFET and the drain wire entries at a same direction of drain current flow of the SMD MoSFET such that overall drain current equally and uniformly flows through both the contact pads and the brass jumper members in the printed circuit board. Thus, this heatsink-less inverter improves thermal conduction and decreases thermal resistance on current conduction path, which results in efficient dissipation of heat in inverter circuitry without any need of heatsink construction.

No. of Pages : 24 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27021

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001133 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : ELECTRICAL CONNECTOR TO CONNECT A SENSOR TO A CONTROL UNIT OF A ROAD VEHICLE

:H01R0013533000, (71)Name of Applicant : H01R0013520000, 1)MAGNETI MARELLI S.p.A. (51) International classification H01M0010613000, Address of Applicant :20011 CORBETTA (MI) / Viale Aldo B29C0070680000, Borletti, 61/63, Italy Italy A47K0010480000 (72)Name of Inventor : (31) Priority Document No :NA 1)Gianfranco LO RITO (32) Priority Date :NA 2)Adriano PLAZIO

(57) Abstract : An electrical connector (18) of a vehicle to connect a sensor (17) to a control unit (16); the electrical connector (18) has: a plurality of metal connection elements (19) with a straight shape; and a casing (22) of plastic material, which encloses, on the inside, the metal connection elements (19). The casing (22) is obtained by interlocking together a lower shell (23) and an upper shell (24), which are placed on top of one another. The lower shell (23) has a plurality of channels (31), which develop longitudinally, cross the entire lower shell (23) from a right end to a left end, and house, on the inside, the connection elements (19). The upper shell (24) has a plurality of transverse ribs (34), which develop transversely and project towards the lower shell (23) so as to press against the corresponding connection elements (19).

No. of Pages : 21 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27022

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001151 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : IMPROVED RUSTIC RICE PREPARATION WITH BALANCED TASTE AND HEALTH/MEDICINAL BENEFITS

:A23L0002520000, (71)Name of Applicant : A23L0007196000, 1)Pangu Hospitality Services Private Limited (51) International classification C04B0037000000, Address of Applicant :Cabin No. 115-116, First Floor, SCO A23L0021250000, 58-59, Sector 17D, Chandigarh - 160017. Punjab India A23G0009320000 (72)Name of Inventor : (31) Priority Document No :NA 1)Sandeep Bansal

(57) Abstract : The present invention relates to a method of preparing rustic rice cooking dish with balanced taste and medicinal or health benefits. More specifically, the invention comprises of a first mixture having from one or more compounds is added with second mixture and premix compounds. Wherein the second mixture comprises of carbon cinder in powder form with milk or honey.

No. of Pages : 13 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27023

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001162 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A TOP LOADING WASHING MACHINE WITH TUMBLING EFFECT AND METHOD THEREOF

:E05F0015720000, (71)Name of Applicant : H02P0001460000, 1)LG ELECTRONICS INC. (51) International classification G05B0019190000, Address of Applicant :20 Yeouido-dong, Yeongdeungpo-gu, E05F0015630000, Seoul 150-721, Republic of Korea Republic of Korea B60H0001000000 (72)Name of Inventor : (31) Priority Document No :NA 1)KHURANA GAGNEET

(57) Abstract : A claw mechanism and method for tumbling effect in a washing machine (100), comprising: a first servo motor (104a) moving a lead screw (112) vertically; and a second servo motor (104b) opening and closing a claw assembly (116). The method comprises steps of: loading (202) wash basket (102) with clothes; switching ON (204) main motor (107) to rotate agitator (105) to start wash/rinse; operating (206) second servo motor (104b) to open claw assembly (116); operating (208) first servo motor (104a) to move lead screw (112) down; operating (210) the second servo motor (104b) to close claw assembly (116) to hold a cloth; operating (212) the first servo motor (104a) to move the lead screw (112) up to provide tumbling effect to cloth; operating (214) second servo motor (104b) to open claw assembly (116) to release cloth; repeating (216) operation of claw assembly (116) and lead screw (112) throughout the wash/rinse.

No. of Pages : 22 No. of Claims : 25

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27024

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001177 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : ORAL FAST DISSOLVING FILMS COMPRISING NOVEL NATURAL POLYMER AND METHOD OF PREPARATION THEREOF

:A61K0009000000, (71)Name of Applicant : A61K0009700000, 1)Chitkara Innovation Incubator Foundation (51) International classification A61K0047320000, Address of Applicant :SCO: 160-161, Sector -9c, Madhya A61K0008640000, Marg, Chandigarh- 160009, India. Chandigarh India A61K0008650000 (72)Name of Inventor : (31) Priority Document No :NA 1)RAJNIBALA (32) Priority Date :NA 2)MADAAN, Reecha (33) Name of priority country :NA 3)SHARMA, Ritima (86) International Application No :NA 4)GARG, Shivali Filing Date :NA 5)ARORA, Sandeep

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to an oral fast dissolving film and a method of preparation thereof. Specifically, the present invention relates to an oral fast dissolving film comprising novel natural polymer and a method of preparation thereof. More particularly, the present invention relates to an oral fast dissolving film comprising natural polymer chlorophytum. The present invention provides a method for preparation of an oral fast dissolving film for therapeutic purpose, said method comprising the steps of: obtaining chlorophytum powder from Chlorophytum borivilianum; dispersing the obtained chlorophytum powder in water to obtain a first solution; filtering said first solution to obtain a filtrate; centrifuging said filtrate to obtain a supernatant liquid; and mixing a plasticizer to said supernatant liquid to obtain a homogenous solution, said homogenous solution being dried and casted into said fast dissolving film.

No. of Pages : 19 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27025

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001178 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : MATTRESS MK-II(IMPROVED VERSION) COMPLETE WITH COVER

:A47G0009020000, (71)Name of Applicant : H05B0003340000, 1)ORDNANCE EQUIPMENT FACTORY( A UNIT OF (51) International classification A47C0027000000, ORDNANCE FACTORY BOARD UNDER MINISTRY OF D05B0011000000, DEFENCE, GOVERNMENT OF INDIA G09F0017000000 Address of Applicant :ORDNANCE EQUIPMENT (31) Priority Document No :NA FACTORY POST BOX NO. 76 PHOOL BAGH KANPUR- (32) Priority Date :NA 208001 UTTAR PRADESH Uttar Pradesh India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)SUMIT KUMAR SRIVASTAVA

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention is related to a light weight foldable Mattress MK-II (Improved Version) Complete with Cover intended to be used in the outdoor camping, extreme cold climates and hostile terrain in high altitude areas. It provides comfort to user in outdoor camping, extreme cold climates and hostile terrain in high altitude areas includes an upper portion comprising a stuff of polyester batting sandwiched between cloth calico white and quilted; a piece of PVC (Polyvinyl Chloride) coated fire resistance fabric is sewn to the bottom of quilt and a detachable top cover made of cloth cotton khaki is provided.

No. of Pages : 12 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27026

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001234 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM, METHODS AND COMPUTER PROGRAM PRODUCTS FOR IDENTITY AUTHENTICATION FOR ELECTRONIC PAYMENT TRANSACTIONS

:H04L0029060000, (71)Name of Applicant : G06Q0020400000, 1)MASTERCARD INTERNATIONAL INCORPORATED (51) International classification G06Q0020100000, Address of Applicant :2000 PURCHASE STREET, G06Q0020040000, PURCHASE, NY 10577, UNITED STATES OF AMERICA G06Q0020120000 U.S.A. (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)GURUNATHAN, Arunmurthy (33) Name of priority country :NA 2)PAREEK, Ravi

(57) Abstract : The invention relates to identity authentication in electronic payment transactions. The invention comprises (i) receiving an identity authentication request responsive to a request for electronic payment initiated in a network session between a client terminal and a merchant server, (ii) receiving the payor account, the payee account and a payment amount, (iii) receiving session data parameters corresponding to a network communication session, (iv) generating an authentication data record based on the session data parameters, (v) transmitting the generated authentication data record to a terminal device associated with the identified payor account, (vi) retrieving from the client terminal, data record(s) associated with electronic payment transactions involving the client terminal, (vii) comparing the data records retrieved from the client terminal against the generated authentication data record, and (viii) responsive to a match between a data record retrieved from the client terminal against the generated authentication data record, generating an identity confirmation decision.

No. of Pages : 34 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27027

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001252 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A PROTECTION SAFETY SHIELD FOR HEAVY DUTY VEHICLES

:E02F0009160000, (71)Name of Applicant : B63B0029020000, 1)ESCORTS LIMITED (51) International classification A61M0005320000, Address of Applicant :15/5, Mathura Road, Faridabad “ E04H0009140000, 121003 (India) Haryana India F41H0005080000 (72)Name of Inventor : (31) Priority Document No :NA 1)Sharma Lalit (32) Priority Date :NA 2)Daultram

(57) Abstract : The invention disclosed herein relates to a protection safety shield for heavy duty vehicles to provide safety to the operator with a choice of using front protection shield in working condition and fold the shield in non working condition and thus prevents them from getting damaged where the ground is uneven or sloped, such as quarries or alike and also it. The present invention comprises of a crank lever (1), a spur gear (2), a sliding spur gear rack (3), a locking lever (4), a locking spur gear (5), a protection shield (6), a V-belt pulley shaft (7) and a crank handle (8). Further, the protection shield allows 360 degree visibility for the operator sitting comfortably on rotating superstructure mounted cabin.

No. of Pages : 14 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27028

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001274 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN APPARATUS FOR CLEANING SOLAR PANEL

:F24S0040200000, (71)Name of Applicant : B32B0037000000, 1)ATMUS ROBOTICS LLP (51) International classification B08B0001000000, Address of Applicant :L-113, Chanakya Place, Part-II, New H02S0040100000, Delhi-110059, India. Delhi India A47L0011400000 (72)Name of Inventor : (31) Priority Document No :NA 1)CHAMAN, Hari (32) Priority Date :NA 2)KUMAR, Ravinder (33) Name of priority country :NA 3)RAZA, Mohammad Ammar (86) International Application No :NA 4)KUMAR, Ojasvi Filing Date :NA 5)KANDHARI, Tanishq (87) International Publication No : NA 6)SINGH, Tanpreet

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An apparatus for cleaning a solar panel is disclosed. The apparatus incorporates a plurality of first wheels rotatably coupled with one another and configured to enable the movement of the apparatus over the solar, and one or more brush rotatably configured to clean the surface of the solar panel. The apparatus incorporates a rotary device to transfer rotary torque to the plurality of first wheels, thereby making the apparatus an all-wheel drive system, which consumes less electrical power. The apparatus includes a transmission unit to transfer and distribute the rotary torque of the rotary device to the plurality of first wheels. The apparatus includes a separate second motor to drive the one or more brush to clean the solar panel.

No. of Pages : 25 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27029

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001356 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : HIGH PRECISION SURGICAL ROBOTIC PLATFORM FOR COOPERATIVE AND TELEOPERATED MINIMAL INVASIVE SURGERIES

:A61B0034300000, (71)Name of Applicant : A61B0034000000, 1)INDIAN COUNCIL OF MEDICAL RESEARCH (51) International classification A61B0090000000, Address of Applicant :an Indian registered body incorporated A61B0034370000, under the Registration of Societies Act (Act XXI of 1860) and A61B0034350000 having their registered office at V. Ramalingaswami Bhawan, P.O. (31) Priority Document No :NA Box No. 4911, Ansari Nagar, New Delhi 110029, India Delhi (32) Priority Date :NA India (33) Name of priority country :NA 2)INDIAN INSTITUTE OF TECHNOLOGY, BOMBAY (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)PRASANNA S. GANDHI (87) International Publication No : NA 2)CHINMAY PRAKASH NAKHWA (61) Patent of Addition to Application Number :NA 3)SANA NASSAR SYED Filing Date :NA 4)SURAJ SANJAY SHIMPI

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Described herein is a robotic surgical system (100) for performing minimally invasive surgery (MIS). The system (100) includes a robot manipulator for the robotically assisted handling of a surgical tool (406). The robot manipulator having a manipulator arm, a manipulator wrist supported by said manipulator arm and a surgical tool holder (112) supported by said manipulator wrist. The manipulator arm is to provide first and second rotational degrees of freedom about X and Z axes using a first linear assembly (104) and a second linear assembly (106), wherein each of the first and second linear assemblies (104, 106) is comprised of a direct-drive actuator (104-1, 106-1) and a compliant remote-center-of-motion (RCM) mechanism (CRCMM) (104-2, 106-2); provide a third rotational degrees of freedom about Y-axis using a tool adapter (408) fitted on top of the surgical tool holder (112); and provide a fourth translation degree of freedom along Y-axis using a motorized linear stage guide (110-1) and a complaint single parallelogram mechanism (CSPM) (110-2).

No. of Pages : 20 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27030

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001407 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A METHOD AND A DEVICE FOR ENABLING KEY RE-USAGE IN A COMMUNICATION NETWORK

:H04L0029060000, (71)Name of Applicant : H04W0012040000, 1)NEC Corporation (51) International classification H04W0076100000, Address of Applicant :7-1, Shiba 5-chome, Minato-ku, Tokyo H04L0009080000, 108-8001, Japan Japan H04W0036080000 (72)Name of Inventor : (31) Priority Document No :NA 1)Sander de Kievit (32) Priority Date :NA 2)Sheeba Backia Mary Baskaran (33) Name of priority country :NA 3)Anand Raghawa Prasad

(57) Abstract : The present disclosure relates to method of enabling key re-usage for an electronic device. The method comprising: receiving a request message from the electronic device, wherein the request message comprises a first information being indicative of a preference for one of a first key associated with a first network node in a first network or a second key associated with a second network node in a second network; processing the request message to determine the preference indicated in the first information; and transmitting a response message to the electronic device for reusing the first key or second key, the electronic device is configured to derive a third key based on the first key or the second key as indicated in the determined preference, and the second network is able to access to the first key and the second key whereas the first network cannot access the second key.

No. of Pages : 67 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27031

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001425 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SYSTEM AND METHOD FOR PERFORMING VOICE BASED BROWSING ON AN ELECTRONIC DEVICE

:G06Q0030020000, (71)Name of Applicant : G06F0003048200, 1)Samsung Electronics Co., Ltd. (51) International classification G06T0011400000, Address of Applicant :129, Samsung-Ro, Yeongtong “Gu, G06F0001280000, Suwon-Si, Gyeonggi-Do, 16677 Republic of Korea G06F0003048400 (72)Name of Inventor : (31) Priority Document No :NA 1)Praveen Sethi (32) Priority Date :NA 2)Suraj Singh Tanwar (33) Name of priority country :NA 3)Hitesh Singla

(57) Abstract : The present invention relates to voice based computing for accessing content by 5 using a command. The present invention a system (100) and method for performing voice based browsing on an electronic device (102). The system (100) includes a controlling device (108), and a processing engine (110). The processing engine (110) includes a memory (208), a processor (210), a determination module (212), a mapping module (226), a display module (228), a receiving module 10 (230), and a control unit (232). The determination module (212) determine one or more segments of a non-navigable content of a display page (106), and at least one identifier (302, 304) for the segments. The mapping module (226) maps the identifier (302, 304) with the segments, and generate mapped data. The display module (228) displays the mapped data. The receiving module (230) receives a 50 15 user input. The control unit (232) performs at least one action on the segments.

No. of Pages : 72 No. of Claims : 34

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27032

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001443 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : OPTIMIZING POSITION ESTIMATES OF AN INDUSTRIAL VEHICLE FOR INDOOR LOCALIZATION

:G01C0021160000, (71)Name of Applicant : G01C0021200000, 1)THE HI-TECH ROBOTIC SYSTEMZ LTD (51) International classification G01S0005020000, Address of Applicant :A-18, INFOCITY 1, SECTOR-34, G05D0001020000, GURUGRAM, HARYANA, INDIA Haryana India B60W0050000000 (72)Name of Inventor : (31) Priority Document No :NA 1)ANUJ KAPURIA (32) Priority Date :NA 2)RITUKAR VIJAY (33) Name of priority country :NA 3)PRADYOT KVN (86) International Application No :NA 4)MANISH SAROYA Filing Date :NA 5)ANKUR BARUAH

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method (300) and a corresponding system (200) for optimizing position estimates of an industrial vehicle (102) for indoor localization is disclosed. The method (300) includes determining a first set of position estimates of the industrial vehicle (102) by executing an Adaptive Monte Carlo Localization (AMCL) method on a motion model associated with the industrial vehicle (102) and a second set of position estimates of the industrial vehicle (102) using an auxiliary sensor (206) fitted on the industrial vehicle (102). An error in localization of the first set of position estimates and the second set of position estimates is calculated. Thereafter, the set of parameters associated with the motion model is optimized to obtain an optimized set of parameters, based on which indoor localization of the industrial vehicle (102) in the industrial environment is performed.

No. of Pages : 36 No. of Claims : 14

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27033

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001475 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEMS AND METHODS FOR SMART PARKING

:G08G0001140000, (71)Name of Applicant : G06Q0030020000, 1)VISHWAS AGRAWAL (51) International classification G01C0021360000, Address of Applicant :A4, Tata Steel Officers Enclave, Beta 1, B62H0003000000, Greater Noida, Uttar Pradesh, India - 201310 Uttar Pradesh India B60W0030060000 (72)Name of Inventor : (31) Priority Document No :NA 1)VISHWAS AGRAWAL (32) Priority Date :NA 2)RINKU SHARMA

(57) Abstract : A smart parking system comprises: a parking place, which includes a parking station. The parking station includes a vehicle detector to identify whenever a parking station is occupied. Further, location of individual parking station is identified; and a map illustrating a cluster of available spaces of parking station in the parking place is generated and communicated to a cloud server arrangement. The cloud server is operable to: receive the generated map and the geological location of the parking place; update the stored maps and the geological locations of the parking place; receive a parking request information of a user associated computing device; analyze the receive request and identify one or more available parking place in proximity of the received request; and transmit the identified parking place to the user associated computing device.

No. of Pages : 29 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27034

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001625 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DETACHABLE STONE BASED GRINDER FOR SIMULTANEOUS DRY AND WET GRINDING WITH EASE OF CLEANABILITY

:B02C0017160000, (71)Name of Applicant : A47L0007000000, 1)Havells India Limited. (51) International classification A47J0042040000, Address of Applicant :904, 9th Floor, Surya Kiran Building, F28C0001140000, KG Marg, Connaught Place, Delhi-110001, India. Delhi India B02C0018220000 (72)Name of Inventor : (31) Priority Document No :NA 1)ANOOP SINGH (32) Priority Date :NA 2)UPENDRA VISHWAKARMA

(57) Abstract : The present invention provides a detachable stone based grinder for dry and wet grinding comprises a wet grinder detachably coupled to a dry grinder thereunder by a coupler (18), wherein the dry grinder includes top stone (9) super imposed on bottom stone (7) with a gap therebetween covered by respective cover (6, 11), wherein the top stone is fixed and bottom stone is rotatable about motor shaft (3); the wet grinder comprises a container (20) accommodating wet stone (21) at bottom thereof supporting a plurality of cleaners (26) and roller stones (24) for grinding, in which the container of said wet grinder rotates about shaft (22). Further, a wet grinder can be detachably connected to a dry grinder thereunder by a rotor (19"), in which the wet grinder rotates about the rotor (19"). It is associated with the following advantageous features:- ¢ Both Dry and Wet Grinding in one seamless appliance ¢ Allows simultaneous processing of Dry and Wet Grinding at same RPM ¢ No Chopping /cutting of ingredients leading to better taste than dry/wet cutting in existing mixer grinder ¢ Compact ¢ Provides modularity i.e. 3 different model Wet, Dry and Wet & dry together ¢ Different throughput and output grain size for different spices ¢ Facilitates cleaning due to detachable design.

No. of Pages : 27 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27035

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001626 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMMERCIAL VEHICLE WASTE ENERGY UTILIZATION FOR CLOTH DRYING AND METHOD THEREOF

:B60H0001000000, (71)Name of Applicant : F02M0026360000, 1)LG ELECTRONICS INC. (51) International classification F02B0047080000, Address of Applicant :20 Yeouido-dong, Yeongdeungpo-gu, D06F0058020000, Seoul 150-721, Republic of Korea Republic of Korea G01N0029024000 (72)Name of Inventor : (31) Priority Document No :NA 1)UPADHYAY AWADHESH

(57) Abstract : An EGR based cloth drying system (100) provided for utilizing exhaust gas heat from a vehicle. The EGR based cloth drying system (100) comprising: a fresh air inlet (102); a fresh air bleed line (108); an exhaust gas bleed line (107); a common line (109); a cloth dryer unit (113) including a tail pipe (110), a duct (111), and a cloth basket (112) including a temperature and a humidity sensor; and a control unit in electronic communication with the temperature sensor, the humidity sensor and the fresh air inlet (102). A method (300) thereof comprises steps of mixing hot exhaust gas from EGR unit (106) with fresh air and channelizing the hot air mixture to the cloth dryer unit (113) to dry a wet laundry load. The EGR based cloth drying system (100) utilizes pressure of hot exhaust gas to deliver the hot air mixture to the cloth basket (112).

No. of Pages : 23 No. of Claims : 22

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27036

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001668 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR COMPUTING A CAPILLARY REFILL TIME AND A QUALITY OF NAIL

:G06K0009000000, (71)Name of Applicant : G06K0009320000, 1)INDIAN INSTITUTE OF TECHNOLOGY ROPAR (51) International classification G10L0025630000, Address of Applicant :INDIAN INSTITUTE OF G09G0005377000, TECHNOLOGY ROPAR, Nangal Road, Rupnagar - 140001, A61B0005020000 Punjab, India Punjab India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)LAKHANI, Piyush Manharbhai (33) Name of priority country :NA 2)KUMAR, Amit (86) International Application No :NA 3)MUNDRA, Rupinder Singh Filing Date :NA 4)KUMAR, Navin

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure relates to system(s) and method(s) for computing a Capillary Refill Time (CRT). The system obtains video data comprising a set of frames and time corresponding to each frame. Further, the system identifies a region of interest based on one or more markers on each frame. The system further determines a start time and an end time. Based on the start time and the end time, the system computes the Capillary Refill Time (CRT). The CRT is a difference between the start time and the end time. Further, a nail bed CRT and a palm side CRT are computed. Based on the nail bed CRT and the palm side CRT, a quality of nail is determined.

No. of Pages : 35 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27037

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001687 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : NOVEL ASSEMBLY SYSTEM TO PREVENT RAIL-WHEEL SHELLING

:B61F0005240000, (71)Name of Applicant : B60T0008175500, 1)Jugal Kishore (51) International classification F16F0009504000, Address of Applicant :941, Sector 9, Vasundhara, Ghaziabad, B61F0005380000, Uttar Pradesh-201012 Uttar Pradesh India B67D0001000000 (72)Name of Inventor : (31) Priority Document No :NA 1)Kishore Jugal (32) Priority Date :NA 2)Suryavanshi Singh Shweta (33) Name of priority country :NA 3)Suryavanshi Singh Gaurav

(57) Abstract : A novel assembly system for preventing wheel shelling in rail vehicles, comprising of a pair of Yaw dampers disposed laterally between the between bogie frame and car body corresponding to each wheel set of the bogie wherein the two chambers formed by the piston in one yaw damper are connected to corresponding chambers of the paired damper to allow flow of the fluid from high to low pressure through a regulator which controls the flow of fluid based on pressure difference between the corresponding chambers. Alternatively each Yaw damper of the pair has a valve each disposed between two chambers of the same yaw damper; wherein the valve controls the flow of the fluid between the two chambers and are operated by a microprocessor. The microprocessor operates the two valves based on inputs from a pressure transducers disposed to sense pressure of the corresponding Yaw damper.

No. of Pages : 18 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27038

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001688 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : FOAM EVAPORATIVE COOLING SYSTEM

:F24F0005000000, (71)Name of Applicant : H02S0099000000, 1)SANGAM SAHU (51) International classification F01P0003220000, Address of Applicant :SCHOOL OF AERONAUTICS, G01N0025560000, NEEMRANA, RAJASTHAN, Rajasthan India B65D0081240000 (72)Name of Inventor : (31) Priority Document No :NA 1)SANGAM SAHU

(57) Abstract : Storage of fresh agricultural produce after harvest is one of the most crucial problems of tropical country like India. About 30-50% vegetables and fruits produced every year are lost at the production site due to inefficient storage. Because of high moisture content, bacterial attach and lack of storage house, fruits and vegetables have very short life and are liable to spoil easily. Thus, the evaporative cooler has prospect for use for short term preservation of vegetables and fruits soon after harvest. Foam Evaporative Cooling System (FECS) could be used effectively for short-duration storage of fruits and vegetables even in either hilly region or all coastal and inland region. It not only reduces the storage temperature but also increases the relative humidity of the storage which is essential for maintaining the freshness of the commodities. A daily monitoring of temperature and relative humidity for both ambient and the cooling system were recorded using the digital thermometer and digital humidity-temperature meter. The weight loss was measured using a digital weighing balance. The performance of the evaporative cooler was evaluated in terms of drops in temperature, weight loss and increased relative humidity and evaporative effectiveness. From the results it showed the average temperature inside the cooling chamber varied from 10°C to 18°C from the ambient temperature. The mean relative humidity of the storage during the period of the experiment was about 75% to 85% respectively, while the mean relative humidity of the ambient environment was from minimum 40% to 85% for tomatoes tested in different dates and months. Based on the principle of direct evaporative cooling, Foam Evaporative Cooling System has been developed. This system works in both zero energy and by help of solar energy. With some modification the system used in both small storage unit and big storage unit.

No. of Pages : 23 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27039

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001689 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SMART DECISION SUPPORT SYSTEM ARCHITECTURE FOR IOT BASED AGRICULTURE APPLICATIONS

:G06Q0050020000, (71)Name of Applicant : A01G0025160000, 1)DR. BRIGHT KESWANI (51) International classification A01B0079000000, Address of Applicant :ASSOCIATE PROFESSOR, A01C0021000000, DEPARTMENT OF COMPUTER APPLICATIONS, SURESH G06Q0010040000 GYAN VIHAR UNIVERSITY, MAHAL JAGATPURA, (31) Priority Document No :NA JAIPUR, INDIA. Rajasthan India (32) Priority Date :NA 2)AMBARISH GAJENDRA MOHAPATRA (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)DR. BRIGHT KESWANI Filing Date :NA 2)AMBARISH GAJENDRA MOHAPATRA

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Agriculture is a basic and most important profession of any country as it balances the food requirement and also the essential raw materials of industry. In the similar sense, the adaptation of implementing smart technology in agriculture practices needs to be focused on better land productivity. Irrigation optimization is a significant practice in Precision Agriculture (PA) based farm management. A PLSR and fuzzy logic based hybrid smart decision support system (DSS) for crop specific irrigation notification and control in precision agriculture is proposed and this can be implemented in farm land, green-house and poly-house. The proposed DSS model can work on real-time mode using National Instruments LabVIEW. This hybrid smart DSS prediction algorithm is implemented in a test land located in Bhubaneswar, the eastern region of India. A comparative analysis is also performed by calculating RMSE, RSE, MSE, RPD and algorithm running time. Crop wise evapotransiration is also calculated using Blaney-Criddle method. The model is attached to the DSS and crop wise required evapotranspiration is found out by considering the planting date. This technique compensates the amount of water that may be lost through evapotranspiration and many other criteria by utilizing the proposed model to predict future irrigation requirements by taking weather, soil, water, and crop data into considerations. Similarly, the fertilizer and manure should be precisely applied during agriculture practice throughout the countryside with the use of digital technologies. This motivates us to develop a reactive web application which will accurately predict the required soil N-P-K (Nitrogen- Phosphorus-Potassium) content by utilizing one time soil testing results of available soil N-P-K contents as per the yield target. This predictive model is designed by considering standard experimental data sets from Indian Council for Agriculture Research (ICAR), India. The prediction model is designed using Random Forest (RF) algorithm which is capable of handling large dataset. The predicted N-P-K content are shown in a reactive R Shiny user interface to notify required N-P-K values for the necessary action by the farmer. The complete web based prediction model is efficiently conveying the required N-P-K content information of the particular farm location to the farmer as well as the agriculture specialists. An integrated irrigation monitoring and control mechanism, and fertilizer management mechanism is developed in this work. The complete system was tested in a test land located in the eastern region of India.

No. of Pages : 26 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27040

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001708 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS TO ELIMINATE THE ADULTERATION IN MILK

:G01N0033040000, (71)Name of Applicant : G01N0021357700, 1)DHARMENDER KUMAR (51) International classification H04N0019700000, Address of Applicant :RZ-65 NANDA ENCLAVE, GOPAL H04M0003530000, NAGAR, NAJAFGARH, NEW DELHI-110043 Delhi India A23C0009200000 (72)Name of Inventor : (31) Priority Document No :NA 1)DHARMENDER KUMAR

(32) Priority Date :NA (33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure relates to building an efficient & cost effective process mechanism that can eliminate the adulteration in the milk & other milk products. Further, In the current scenario all the collected milk is either store or processed in large size container, that result into the loss of distinct natural characteristic (As every Mammal has its own quality of milk and have distinct nutritional value even if compared within same breed) of an individual cow/buffalo/goat milk. Hence, apart from controlling the adulteration presented disclosure will also provide customer more option in terms of milk possessing distinct nutritional values (as milk are packed and deliver in small size bottles only and won"t be mixed up another dairy farmer/ cattle milk) and customer will be able to choose milk as per his/her own need/preference.

No. of Pages : 9 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27041

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001722 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AIR-COOLED DIODE-PUMPED ALL-FIBER CW/QCW THULIUM LASER FOR OPERATING WAVELENGTH OF 1.94 μM

(51) International classification :H01S3/04H01S3/0941 (71)Name of Applicant : (31) Priority Document No :NA 1)COUNCIL OF SCIENTIFIC AND INDUSTRIAL (32) Priority Date :NA RESEARCH (33) Name of priority country :NA Address of Applicant :ANUSANDHAN BHAWAN, 2 RAFI (86) International Application No :NA MARG NEW DELHI-110001, INDIA Delhi India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)PAL ATASI (61) Patent of Addition to Application 2)PAL DEBASIS :NA Number 3)CHOWDHURY SOURAV DAS :NA Filing Date 4)SEN RANJAN

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention provides a method of developing air-cooled diode-pumped all-fiber CW/QCW thulium laser for operating wavelength of 1.94 (im to deliver CW power up to 37 W with efficient thermal management in air-cooled operation. The pumping with a set of laser diodes can operate the TFL in CW as well as QCW mode. The judicious assembling of optical components for optical engine on suitable air-cooled aluminum heat sink is effective in terms of size, cost and maintenance. The counter-propagating configuration is effective in terms of heat dissipation compared to the co-propagation as the laser light propagates in opposite direction of the pump and consequently the separation of the pump light from the laser light is not required. The optimum all-fiber laser architecture provides stable and repeatable operation with slope efficiency of 50% against launched pump power. The SNR of the TFL is > 35 dB with line width of 0.25 nm. The TFL can be modulated in the range of repetition rate from 10 to 1000 Hz with pulse width of 40 (is to 2 s. The rugged maintenance free operation of such air-cooled compact TFL with wall-plug efficiency of 17% is suitable for easy integration in laser system for rigorous use in industrial and medical applications.

No. of Pages : 26 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27042

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001730 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : FLOATABLE DISC TYPE OIL SKIMMING DEVICE AND OIL EXTRACTION METHODS THEREOF

:F16H0055300000, (71)Name of Applicant : B01D0017020000, 1)SRM Institute of Science and Technology (51) International classification E02B0015100000, Address of Applicant :Delhi- NCR Campus NA Modinagar, F16H0061000000, Ghaziabad Uttar Pradesh India Uttar Pradesh India B62D0005060000 (72)Name of Inventor : (31) Priority Document No :NA 1)Subbarao Chamarthi (32) Priority Date :NA 2)Freedon Daniel (33) Name of priority country :NA 3)Bala Murugan (86) International Application No :NA 4)Anshul Kumar Choubey Filing Date :NA 5)Aakash Gupta

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to the floatable disc type oil skimming device and oil extraction methods thereof. The floatable disc type oil skimming device and oil extraction methods thereof comprise of a metal disc, at least one motor, at least one shaft, at least two bearings, a coupler, a hollow tube, at least two chain sprockets, at least three clamps, a reservoir tank, a power source, a metal ring plate. The chain sprocket are further comprise of a shaft sprocket, a chain and a motor sprocket. The clamps are further comprise of a motor sprocket clamps, a disc clamp and a shaft sprocket clamp. The shaft is fixed in the metal ring plate by thebearings, and the metal disc are placed in the shaft through the metal disc bore. The shaft sprocket are connected to the shaft through the shaft sprocket bore. The shaft sprocket are connected to themotor sprocket. The motor is rotate by the power source. The metal ring plate are placed on the hollow tube.

No. of Pages : 14 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27043

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001740 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : E SKATE AND SCOOTER

:A63B0021220000, (71)Name of Applicant : A63B0022060000, 1)University of Engineering & Management (51) International classification A63G0007000000, Address of Applicant :Gurukul, Sikar Road NH 11, Near A63B0022000000, Udaipuria Mod, Jaipur, Rajasthan 303807 Rajasthan India C07D0401140000 (72)Name of Inventor : (31) Priority Document No :NA 1)Ritam Mallick

(57) Abstract : A new style of biking which is multipurpose while using. We can ride this manually without electric or with electric. And the style of ride is also the combination of skating, scootaring and cycling.

No. of Pages : 3 No. of Claims : 2

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27044

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001767 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SYNTHETIC PEPTIDE ANTIGEN, PROCESS FOR THE DETECTION OF SALMONELLOSIS AND OPTICAL READER FOR DETECTION THEREOF•

:A61K0039000000, (71)Name of Applicant : C07K0016120000, 1)PANJAB UNIVERSITY (51) International classification C07K0014255000, Address of Applicant :Administrative Block, Sector 14, A61K0039390000, Chandigarh (U.T.) Punjab “ 160014, India Punjab India G01N0033564000 2)COUNCIL OF SCIENTIFIC AND INDUSTRIAL (31) Priority Document No :NA RESEARCH (32) Priority Date :NA 3)INSTITUTE OF NANO SCIENCE AND TECHNOLOGY (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)RISHI, Praveen Filing Date :NA 2)SURI, Chander Raman (87) International Publication No : NA 3)SABHERWAL, Priyanka (61) Patent of Addition to Application 4)TEWARI, Rupinder :NA Number 5)PATHANIA, Preeti :NA Filing Date 6)KAUR, Harmanjit

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention provides a synthetic peptide antigen corresponding to FliC/FjiB Flagellar protein of Salmonella of SEQ ID No. 1. The peptide can be used for detecting the presence of antibodies to Salmonella Typhi in test samples. The method of detection involves contacting the sample with the peptide antigen under conditions which allow an immunological complex to form between the peptide and any Salmonella Typhi-specific antibodies present in the sample. The present invention also provides a hand-held optical reader capable of displaying voltage-change resulting when the unbound synthetic peptide antigen of SEQ ID NO. 1 as coated on the probe of the device becomes bound.

No. of Pages : 21 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27045

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001786 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR AUTHORIZATION OF SENSOR NODES IN WIRELESS SENSOR NETWORKS

:H04W0084180000, (71)Name of Applicant : H04W0028060000, 1)BML Munjal University (51) International classification H04W0004700000, Address of Applicant :67 KM Milestone, National Highway - H04W0012100000, 8, Gurugram , Haryana-122413, India. Haryana India H04W0052020000 (72)Name of Inventor : (31) Priority Document No :NA 1)Sunil Gupta

(32) Priority Date :NA (33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a system and method for authorization of sensor nodes in wireless sensor network (WSN), wherein the system comprises of at least a base station and plurality of sensor nodes. The method for authorization of sensor nodes in WSN comprises the steps of initializing the sensor nodes, obtaining a request from a first sensor node for transmission of a data in WSN, wherein the request is received by the base station, selecting at least a second sensor node from plurality of sensor nodes for receiving data from the first sensor node, issuing a request message comprising authentication information to the second sensor node, authorizing the first sensor node and second sensor node for secured data transmission.

No. of Pages : 10 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27046

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001841 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : WATER TANK-CUM-SEAT FOR USE IN RIOT OR MOB CONTROL VEHICLE

(51) International classification :A62C27/00 (71)Name of Applicant : (31) Priority Document No :NA 1)COUNCIL OF SCIENTIFIC AND INDUSTRIAL (32) Priority Date :NA RESEARCH (33) Name of priority country :NA Address of Applicant :ANUSANDHAN BHAWAN 2 RAFI (86) International Application No :NA MARG NEW DELHI-110001, INDIA Delhi India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)HARISH HIRANI (61) Patent of Addition to Application Number :NA 2)DIP NARAYAN RAY Filing Date :NA 3)SANKAR KARMAKAR

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Often a separate water-tank or dedicated large vehicle is used for the purpose of carrying water to disperse through water cannon for riot control. Besides, deployment of security personals are sometimes necessary, if the degree of aggressiveness of the mob is medium or low. But using two separate vehicles for same objective is unworthy. Also, improper design of the seats creates discomfort to the security personals for travelling over long distance due to backache. Furthermore, in conventional riot control vehicles, they sit face- to-face and cannot watch outside which may even cause life threat. Hence the present invention describes a design where the ergonomically designed seats are integrated over a water tank as shown in Figure 7, whose capacity can be varied according to the requirement, available space and load carrying capacity of the vehicle. Security personals can seat back-to-back and same may be used as a stool. Thus present invention is of immense use for riot control vehicles.

No. of Pages : 25 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27047

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001843 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : THE PROCESS OF MAKING HIGHLY SENSITIVE SCREEN PRINTED ELECTRODE FOR THE DETECTION OF REDOX SUBSTANCES

(51) International classification :G01N27/30 (71)Name of Applicant : (31) Priority Document No :NA 1)COUNCIL OF SCIENTIFIC AND INDUSTRIAL (32) Priority Date :NA RESEARCH (33) Name of priority country :NA Address of Applicant :ANUSANDHAN BHAWAN 2 RAFI (86) International Application No :NA MARG NEW DELHI-110001, INDIA Delhi India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)KALYAN KUMAR MISTRY (61) Patent of Addition to Application Number :NA 2)ABHIJIT MAHAPATRA

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An improved process of making highly sensitive screen printed electrode for the detection of redox substances which comprises three electrode system, namely, working electrode, counter electrode and reference electrode printed on a PET coated flexible non tearable polyester film substrate with conducting ink materials layered one after other. The different layers are printed using manual screen print setup with different screen masks. The process have been optimized based on geometrical dimensions, drying time and curing temperature so that a large uniform rough surface of the working electrode is achieved for enhancement of electron transfer capability. Illustration of the working of the invention in actual practice with in a fixed concentration of redox analyte of 1 mM show that the developed screen printed electrode has higher sensitivity in comparison to the commercially available most sensitive screen printed electrode i.e., ref. CI 10.

No. of Pages : 18 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27048

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001847 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SMART BIN SYSTEM

:G06Q0010080000, (71)Name of Applicant : G06T0019000000, 1)JECRC UNIVERSITY (51) International classification G06F0003048100, Address of Applicant :Plot No. IS- 2036 to 2039, Sitapura B65F0001140000, Industrial Area Extn, Ramchandrapura, Near Mahatma Gandhi G06F0016280000 Hospital, Vidhani, Jaipur-303905, Rajasthan Rajasthan India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)DR AVIRENI SRINIVASULU (33) Name of priority country :NA 2)MR M. K. CHAITHANYA

(57) Abstract : The present invention is related to a Smart Bin system that is capable of being installed at any location in a city. The system comprises of a set of sensors for sensing contents of the bin. The system collects sensors data and computes the threshold information. The data is then concatenated with other required information like date & time, GPS coordinates etc. Finally the complete data is uploaded to the cloud for data storage. The user interface then fetches the cloud data and shows the complete information in graphical view which is used for monitoring and data analytics.

No. of Pages : 10 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27049

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001866 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : TOPICAL ANTIBACTERIAL FORMULATION COMPRISING DINOXIN B WITHANOLIDE

(51) International classification :A61K36/00A61K9/0014 (71)Name of Applicant : (31) Priority Document No :NA 1)AMITY UNIVERSITY (32) Priority Date :NA Address of Applicant :AMITY UNIVERSITY CAMPUS, (33) Name of priority country :NA SECTOR-125 NOIDA UTTAR PRADESH-201313 Uttar Pradesh (86) International Application No :NA India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)PRITI MATHUR (61) Patent of Addition to Application 2)CHANDNI TANDON :NA Number 3)MOHINI CHAURASIA :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a topical antibacterial formulation containing Dinoxin B withanolide. Withanolide is extracted from ethanolic leaf extract of Datura inoxia plant in the form of pharmacological gel. This is tested on gram positive Staphylococcus aureus and found effective with appreciable Zone of inhibition (ZOI). The formulation also showed its broad spectrum behavior and found positive and safe for human when tested on mammalian cell lines and on animal model. These results encourage the use of herbal compound in different antibacterial pharmacological preparation like capsulk tablets, cream, gel etc.

No. of Pages : 11 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27050

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001867 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SOLAR POWERED CHARGER FOR WIRELESS CHARGING

(51) International classification :H02J7/35 (71)Name of Applicant : (31) Priority Document No :NA 1)AMITY UNIVERSITY (32) Priority Date :NA Address of Applicant :AMITY UNIVERSITY CAMPUS, (33) Name of priority country :NA SECTOR 125 NOIDA UTTAR PRADESH-201313, INDIA Uttar (86) International Application No :NA Pradesh India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)NEETU MITTAL (61) Patent of Addition to Application Number :NA 2)AAMNA SHAHAB

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a solar powered charger to wirelessly charge the mobile phones. The solar powered charger is kept at a short distance from the phone, consumes solar energy through its monocrystalline solar cells and transmits energy for the mobile device to get charged, wireless solar power charger (1) comprising wireless power transmission devices consisting of wireless base/ pad (10) having magnetic coils (not shown), the solar panel (11) consisting of monocrystalline silicon cells (12) connected with wireless base/pad (10) using sensor chips and charge controller (13) connected with base pad (10) within the circuit for transferring the charging signals in a short range of 15-22 meters and charging the smart device without being in contact with it.

No. of Pages : 14 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27051

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001963 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A NOVEL NEEM BASED WATER DISPERSIBLE GRANULAR FORMULATION AND PROCESS THEREOF

:A61K0009000000, (71)Name of Applicant : A61K0009160000, 1)INSTITUTE OF PESTICIDE FORMULATION (51) International classification A01N0025140000, TECHNOLOGY A01N0065260000, Address of Applicant :Sector 20, Udyog Vihar, NH-8, H01M0004580000 Gurgaon-122016, Haryana, India. Haryana India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)P.K. Patanjali (33) Name of priority country :NA 2)Nusrat (86) International Application No :NA 3)Natish Kumar Filing Date :NA 4)Amrish Agrawal (87) International Publication No : NA 5)Jitendra Kumar

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention discloses a novel water dispersible granular formulation of neem oil and process thereof. The composition of granular formulation comprises neem oil absorbed over hydrophilic silica and subsequently mixed with appropriate surfactants, disintegrating agent and fillers in definite proportion. The water disposable granular formulation effectively control the mosquito adult and have good larvicidal property. The water dispersible granular formulation has enhanced stability as the formulation is not solvent based. Typically these consist of small granules of 0.1-3 mm in diameter and of uniform size and which are free flowing, low dusting in comparison with dust and wettable powder formulations and readily disperse in water as liquid formulations to form a homogenous mixture which may pass through conventional spray nozzles.

No. of Pages : 29 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27052

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911001972 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A DRIVING TEST SIMULATION APPARATUS

:G02B0027010000, (71)Name of Applicant : G06F0003010000, 1)Chitkara Innovation Incubator Foundation (51) International classification A63B0022060000, Address of Applicant :SCO: 160-161, Sector -9c, Madhya H04R0001100000, Marg, Chandigarh- 160009, India. Chandigarh India A63B0022000000 (72)Name of Inventor : (31) Priority Document No :NA 1)SHARMA, Shivam (32) Priority Date :NA 2)SINGH, Narinder Pal (33) Name of priority country :NA 3)TULI, Neha (86) International Application No :NA 4)MANTRI, Archana

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure provides a driving test simulation apparatus. The disclosed apparatus comprises: a Virtual Reality (VR) headset having a processor that is operatively coupled with a memory, said memory storing computer-implemented instructions which when executed by said processor enables a user that is wearing the VR headset to undertake simulation of a driving test; a 3D-printing based steering wheel operatively coupled with said VR headset, said steering wheel being used by said user to manoeuvre driving route that forms part of the driving test; and at least two 3D-printing based pedals operatively coupled with said VR headset and said steering wheel, said pedals being used by said user to control acceleration or braking during driving along said route.

No. of Pages : 17 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27053

(12) PATENT APPLICATION PUBLICATION (21) Application No.201914004174 A (19) INDIA (22) Date of filing of Application :02/02/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : MESSAGING SYSTEM FOR DELIVERING AUDIO AND/OR VIDEO MESSAGES

:G06Q0030020000, (71)Name of Applicant : H04N0021810000, 1)ADGREETZ, INC. (51) International classification H04W0004021000, Address of Applicant :2038 ARMACOST AVENUE, 2ND H04H0060310000, FLOOR, LOS ANGELES, CALIFORNIA 90025 UNITED H04H0060510000 STATES OF AMERICA U.S.A. (31) Priority Document No :62/790,274 (72)Name of Inventor : (32) Priority Date :09/01/2019 1)FRANKEL, Eric (33) Name of priority country :U.S.A. 2)SURDAM, Evan W.

(57) Abstract : System and method for the automated creation of messages (e.g., advertising units or "ad units") based on the audience to which the message is targeted. For example, the content of a message may be in relationship to the target audiences" attributes or characteristics as well as the message outlet specifications, and contains relevant targeting/audience attributes, buying strategy and lifecycle on advertising outlets and similar advertising retailers, such as Google AdWords.

No. of Pages : 44 No. of Claims : 22

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27054

(21) Application No.201914045967 (12) PATENT APPLICATION PUBLICATION A (19) INDIA (22) Date of filing of Application :12/11/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AIRCRAFT CARGO FLOOR ARCHITECTURE AND METHOD OF MODIFYING THE AIRCRAFT CARGO FLOOR ARCHITECTURE

(51) (71)Name of Applicant : International :B64D0009000000,B64C0001200000,B64F0001320000,B60R0005040000,B64C0001140000 1)The Boeing Company classification Address of Applicant :100 North (31) Priority Riverside Plaza, Chicago, IL 60606- Document :16/246,345 2016, U.S.A. U.S.A. No (72)Name of Inventor : (32) Priority 1)SPRY, Michael D. :11/01/2019 Date 2)ULVIN, Mark A.

(33) Name of priority :U.S.A. country (86) International Application :NA No :NA Filing Date (87) International : NA Publication No (61) Patent of Addition to :NA Application :NA Number Filing Date (62) Divisional to Application :NA Number :NA Filing Date

(57) Abstract : An aircraft cargo floor architecture comprises a plurality of aircraft keel frames. One or more longitudinal rails are attached directly to the aircraft keel frames. The one or more longitudinal rails are designed to provide structural support for an aircraft cargo floor.

No. of Pages : 29 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27055

(12) PATENT APPLICATION PUBLICATION (21) Application No.201914052396 A (19) INDIA (22) Date of filing of Application :17/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DRAFTING SYSTEM OF A SPINNERY MACHINE

:D01H0005720000, (71)Name of Applicant : B65H0054280000, 1)MASCHINENFABRIK RIETER AG (51) International classification D01H0001115000, Address of Applicant :Klosterstrasse 20, 8406 Winterthur, D01H0004020000, Switzerland Switzerland G02B0006440000 (72)Name of Inventor : (31) Priority Document No :10 2019 100 603.1 1)Gerd Stahlecker (32) Priority Date :11/01/2019 2)Gernot Schaeffler

(33) Name of priority country :Germany (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention relates to a drafting system (1) of a spinnery machine having roller pairs (2, 3, 4) between which at least one fiber strand (5) can be guided and drafted, having a traversing device (6) comprising a traversing element (7) and least one fiber guide (8), the at least one fiber guide (8) being able to guide a fiber strand (5) associated with the fiber guide (8), the oscillating element (7) being oscillated in a traversing motion (CB) relative to the roller pairs (2, 3, 4) in the axial direction (X) thereof, and the at least one fiber guide (8) being disposed on the traversing element (7) such that the at least one fiber strand (5) can be oscillated by means of the traversing motion (CB) of the fiber guide (8) associated with the fiber strand (5), having a condensing device (9) by means of which the fiber strand (5) fully drafted by the roller pairs (2, 3, 4) can be condensed, and having at least one bearing in which at least the roller pairs (2, 3, 4), the traversing device (6), and/or the condensing device (9) are supported. According to the invention, the traversing device (6) is disposed relative to the at least one bearing (23, 24) such that the at least one fiber guide (8) can be displaced in the axial direction (X) relative to the traversing element (7) at the at least one bearing (23, 24) by means of the traversing motion (CB), so that the at least one fiber guide (8) can be aligned in the axial direction (X) relative to the condensing device (9).

No. of Pages : 33 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27056

(12) PATENT APPLICATION PUBLICATION (21) Application No.201914052738 A (19) INDIA (22) Date of filing of Application :18/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : WIRELESS POWER SYSTEM

:H02J0007020000, (71)Name of Applicant : H02J0050120000, 1)APPLE INC. (51) International classification H02J0050800000, Address of Applicant :One Apple Park Way, Cupertino, H02J0005000000, California 95014, United States of America U.S.A. H02J0007000000 (72)Name of Inventor : (31) Priority Document No :62/791,587 1)MEHTA, Narendra S. (32) Priority Date :11/01/2019 2)TERRY, Stephen C. (33) Name of priority country :U.S.A. 3)DAYAL, Rohan

(57) Abstract : A battery case has first and second coils on opposing sides of a battery and has switching circuitry that is coupled between the first and second coils. The battery case has a battery that provides supplemental battery power wirelessly to a wireless power receiving device via the second coil when the switching circuitry is in an open state. The case can also receive power wirelessly with the first coil from a wireless charging mat when the switching circuitry is in the open state. In a closed state, the switching circuitry shorts the first and second coils together so that current flowing through the first coil flows through the second coil in series and so that wireless power from the wireless charging mat that is received with the first coil is transmitted wirelessly to the wireless power receiving device using the second coil.

No. of Pages : 31 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27057

(12) PATENT APPLICATION PUBLICATION (21) Application No.201914053183 A (19) INDIA (22) Date of filing of Application :20/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD FOR PRODUCING A NEGATIVE MOULD FOR A SPIRAL NOZZLE, SPIRAL BASIC SHAPE POSITIVE, AND SPIRAL NOZZLE

:H01M0004020000, (71)Name of Applicant : H01M0002300000, 1)Lechler GmbH (51) International classification G02B0013000000, Address of Applicant :Ulmer Strasse 128, 72555 Metzingen, H01M0004139300, Germany Germany G04B0017060000 (72)Name of Inventor : (31) Priority Document No :102019200212.9 1)J¼rgen Speier (32) Priority Date :10/01/2019 2)Patrick Braun

(57) Abstract : The invention relates to a method for producing a negative mould for a spiral nozzle, said method comprising the following steps: embedding a spiral basic shape positive in a moulding compound; solidifying the moulding compound; removing the spiral basic shape positive from the solidified moulding compound in order for a spiral basic shape negative to be produced; incorporating a conical clearance in the spiral basic shape negative, wherein the conical clearance is incorporated so as to be coaxial with the central longitudinal axis of the spiral basic shape negative, and on account thereof producing a spiral shape negative; and disposing a conical core in the spiral shape negative.

No. of Pages : 29 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27058

(12) PATENT APPLICATION PUBLICATION (21) Application No.201914053765 A (19) INDIA (22) Date of filing of Application :24/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : VEHICLE BODY LOWER STRUCTURE

:C07D0403120000, (71)Name of Applicant : H04W0036220000, 1)SUZUKI MOTOR CORPORATION (51) International classification C07D0403140000, Address of Applicant :300 Takatsuka-cho, Minami-ku, C07D0417060000, Hamamatsu-shi, Shizuoka 432-8611, Japan Japan C07D0413040000 (72)Name of Inventor : (31) Priority Document No :2019-004564 1)Yudai MINESHIMA

(32) Priority Date :15/01/2019 (33) Name of priority country :Japan (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : First and second floor cross members (10, 20) are joined to side sills (55). The first floor cross member (10) is provided with a first member inclined portion (16) inclined downwardly. The second floor cross member (20) is provided with a second member inclined portion (26). A main floor panel (30) has a front side bottom surface portion (31), a rear side upper surface portion (34) extending downwards from an upper side ridge of an upper portion of a step portion, and a downwardly inclined floor inclined portion (35), and the floor inclined portion (35) situated between the first member inclined portion (16) and the second member inclined portion (26) extends in the front-rear direction.

No. of Pages : 31 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27059

(12) PATENT APPLICATION PUBLICATION (21) Application No.201914053766 A (19) INDIA (22) Date of filing of Application :24/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : VEHICLE LOWER STRUCTURE

(33) Name of priority country :Japan (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A vehicle lower structure includes a front floor panel (1) and a rear floor panel (2) and side sills (3); a step portion (4) is provided on the front floor panel (1) on a rear side of the vehicle, the rear floor panel (2) is disposed at the step portion (4); the front floor panel (1) includes a floor side-surface portion (11) that joins to the side sills (3), a floor inclined-surface portion (12) that is located inward of the floor side-surface portion (11) and inclines upwardly toward an inner side of the vehicle, and a floor central-surface portion (13) that is located inward of the floor inclined-surface portion (12) and is flat in the vehicle width direction; and the step portion (4) extends in the vehicle width direction, and is disposed along the floor central-surface portion (13), the floor inclined-surface portion (12), and the floor side-surface portion (11).

No. of Pages : 30 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27060

(12) PATENT APPLICATION PUBLICATION (21) Application No.201917028660 A (19) INDIA (22) Date of filing of Application :16/07/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DISSOLVING MICRONEEDLE PATCHES COMPRISING CORTICOSTEROID

(51) International classification :A61M 37/00 (71)Name of Applicant : (31) Priority Document No :10201800072Y 1)MICROPOINT TECHNOLOGIES PTE LTD (32) Priority Date :03/01/2018 Address of Applicant :3, Soon Lee St., #04-37 Pioneer (33) Name of priority country :Singapore Junction Singapore 627606 Singapore (86) International Application No :PCT/SG2019/050014 2)NATIONAL SKIN CENTRE (S) PTE LTD Filing Date :10/01/2019 (72)Name of Inventor : (87) International Publication No :WO 2019/135717 1)LIM, Chee Yen (61) Patent of Addition to Application 2)TEY, Hong Liang :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : In the preferred embodiment of the present invention a patch of dissolving microneedles loaded with active ingredients to be applied to skin for treating skin conditions is provided. As seen in Fig. 1 the dissolving microneedle patch (10) comprises a substrate (12) and a plurality of microneedles (14) which extends from the substrate. The dissolving microneedle patch (10) is made of a matrix material and at least one active ingredient such as a corticosteroid namely triamcinolone (TAC). The matrix material is made of bio-compatible materials such as hyaluronic acid (HA) polyvinylpyrrolidone (PVP) or mixture of them which dissolve rapidly when they are in contact with the inner skin. The active ingredient is loaded onto individual patches with the desirable dosage ranging from 0.01mg - 1.0mg.

No. of Pages : 14 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27061

(12) PATENT APPLICATION PUBLICATION (21) Application No.201917046662 A (19) INDIA (22) Date of filing of Application :15/11/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : Shift Register Unit, Gate Driving Circuit And Display Device

(51) International classification :G09G 3/36 (71)Name of Applicant : (31) Priority Document No :201820630007.5 1)BOE TECHNOLOGY GROUP CO., LTD. (32) Priority Date :28/04/2018 Address of Applicant :No.10 Jiuxianqiao Rd., Chaoyang (33) Name of priority country :China District Beijing 100015 China (86) International Application No :PCT/CN2019/071186 (72)Name of Inventor : Filing Date :10/01/2019 1)XU, Chen (87) International Publication No :WO/2019/205745 2)HAO, Xueguang (61) Patent of Addition to Application 3)QIAO, Yong :NA Number 4)WU, Xinyin :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A shift register unit (10), a gate driving circuit (20) and a display device (30), the shift register unit (10) comprising an input circuit (100), an output circuit (200), a reset circuit (300), a control circuit (400), and a reset stabilization circuit (500). The input circuit (100) is configured to write, in response to an input start signal, an input signal to a first node (N1); the output circuit (200) is configured to output, under the control of a level of the first node (N1), a preliminary output signal to an output end (Output); the reset circuit (300) is configured to reset the output end (Output) under the control of a level of a second node (N2); the control circuit (400) is configured to apply, in response to a control signal, a first voltage signal to the second node (N2); and the reset stabilization circuit (500) is configured to apply, in response to a reset stabilization signal, a second voltage signal to the first node (N1). The shift register unit (10) can improve the stability of an output signal, avoiding interference of other signals, improving the display quality.

No. of Pages : 37 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27062

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014000135 A (19) INDIA (22) Date of filing of Application :02/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS FOR PRODUCING A VPO CATALYST

:B01J0027198000, (71)Name of Applicant : B01J0037000000, 1)Clariant International Ltd (51) International classification B01J0035000000, Address of Applicant :Rothausstr. 61, 4132 Muttenz, B01J0023000000, Switzerland Switzerland B01J0037020000 (72)Name of Inventor : :10 2019 100 1)BOECKLEIN, Sebastian (31) Priority Document No 983.9 2)MESTL, Gerhard (32) Priority Date :16/01/2019 3)BINDSEIL, Gabriele (33) Name of priority country :Germany 4)HAUSMANN, Rene (86) International Application No :NA 5)LIMBRUNNER, Sarah Filing Date :NA 6)WALDSCHUETZ, Anna

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention relates to a process for producing a VPO catalyst containing molybdenum and a vanadyl pyrophosphate phase, which comprises the steps: a) provision of a reaction mixture comprising a V(V) compound, a P(V) compound, an Mo compound, a reducing agent and a solvent, b) reduction of the V(V) compound by means of the reducing agent at least in parts to give vanadyl hydrogenphosphate in order to obtain an intermediate suspension, c) filtration of the intermediate suspension from step b) in order to obtain an intermediate, d) drying of the intermediate at a temperature of not more than 350°C in order to obtain a dried intermediate and e) activation of the dried intermediate at a temperature above 200°C, characterized in that not more than 0.2% by weight of water, based on the weight of the reaction mixture, is present in step a) and no water is withdrawn during the reduction in step b). The invention further relates to a VPO catalyst which is able to be produced by the process of the invention and also a catalyst containing the molybdenum-containing vanadium-phosphorus mixed oxide.

No. of Pages : 16 No. of Claims : 14

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27063

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014000236 A (19) INDIA (22) Date of filing of Application :03/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BRACKET

:F24F0013220000, (71)Name of Applicant : B41J0002165000, 1)SUMITOMO WIRING SYSTEMS, LTD. (51) International classification H01R0013520000, Address of Applicant :1-14 Nishisuehiro-cho, Yokkaichi-shi, F25D0021140000, Mie 510-8503 Japan Japan H01R0009240000 2)SUZUKI MOTOR CORPORATION (31) Priority Document No :2019-003803 (72)Name of Inventor : (32) Priority Date :11/01/2019 1)MATSUO Yuya (33) Name of priority country :Japan 2)NISHII Kensaku (86) International Application No :NA 3)ITO Masaki Filing Date :NA 4)NAKAMURA Masaki (87) International Publication No : NA 5)HORIUCHI Akira (61) Patent of Addition to Application Number :NA 6)UENISHI Katsuyuki Filing Date :NA 7)TABATA Yuki

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A bracket includes: a liquid receiving tray that covers one side surface of a vehicle electrical connection box and receives liquid; and a drainage port that provided by a notch in the liquid receiving tray; an extension groove that extends from an edge of the drainage port to an outside of the liquid receiving tray; and at least one of a convex portion and a concave portion that is provided at an inside of at least one of the drainage port and the extension groove to guide a flow of the liquid.

No. of Pages : 22 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27064

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014000562 A (19) INDIA (22) Date of filing of Application :06/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : VEHICLE BODY LOWER STRUCTURE

:B62D0025200000, (71)Name of Applicant : B62D0021150000, 1)SUZUKI MOTOR CORPORATION (51) International classification F01N0013180000, Address of Applicant :300 Takatsuka-cho, Minami-ku, H01L0023340000, Hamamatsu-shi, Shizuoka 432-8611, Japan Japan B62D0043100000 (72)Name of Inventor : (31) Priority Document No :2019-004564 1)Yudai, MINESHIMA

(57) Abstract : A main floor panel (30) of a vehicle body lower structure has a front side bottom surface portion (31), a step portion extending upwards from the rear portion of the front side bottom surface portion (31), a rear side upper surface portion (34) extending rearwards from an upper side ridge formed on the upper side of the step portion, and a floor inclined portion (35) provided on the outer side of the rear side upper surface portion (34) and inclined downwards as it extends toward the outer side, and a first floor cross member (10) is joined to the main floor tunnel (40), and overlaps the upper side ridge in top plan view.

No. of Pages : 37 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27065

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014000563 A (19) INDIA (22) Date of filing of Application :06/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : VEHICLE BODY LOWER STRUCTURE

:B62D0025200000, (71)Name of Applicant : B60C0011030000, 1)SUZUKI MOTOR CORPORATION (51) International classification B62D0025020000, Address of Applicant :300 Takatsuka-cho, Minami-ku, E04B0001700000, Hamamatsu-shi, Shizuoka 432-8611, Japan Japan F16L0003240000 (72)Name of Inventor : (31) Priority Document No :2019-004564 1)Shinei, MOCHIZUKI

(57) Abstract : Floor side members (31, 32) constituting a vehicle body lower structure have inner side inclined portions (31b, 32b) inclined toward the inner side; a reinforcement (40) has an intermediate portion (44) extending across a floor tunnel (11), and outer side inclined portions (41b, 42b) extending from both side portions of the intermediate portion (44) toward the inner side inclined portions (31b, 32b); flanges (44a, 44b) of the intermediate portion (44) are joined to an opening edge portion of the floor tunnel (11); on the side portion of the outer side inclined portions (41b, 42b), there are provided outer side flanges (41c, 42c) extending toward the outer side; and the outer side flanges (41c, 42c) are joined to the inner side inclined portions (31b, 32b).

No. of Pages : 31 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27066

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014000575 A (19) INDIA (22) Date of filing of Application :06/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : STROLLER ACCESSORY AND DOUBLE STROLLER ASSEMBLY

:B62B0007140000, (71)Name of Applicant : B62B0005000000, 1)BABYZEN (51) International classification B62B0009140000, Address of Applicant :2355 route des Pinchinats 13100 AIX- B62B0009000000, EN-PROVENCE, FRANCE France B62B0009260000 (72)Name of Inventor : (31) Priority Document No :1900316 1)CHAUDEURGE, Jean-Michel

(32) Priority Date :14/01/2019 (33) Name of priority country :France (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : This stroller accessory (200), which is connectable to a stroller to form a double stroller together and which is unusable to transport a child when the accessory is disconnected from the stroller, includes a frame (210), a connection mechanism (250) for reversibly connecting the accessory to the stroller while defining a tilting axis (Y250) around which the front part of the frame of the accessory and the rear part of the frame of the stroller tilt freely relative to one another, two wheels (230G, 230D) coupled to a rear part (212) of the frame so as to pivot, a pushing member (240) borne by the rear part of the frame, a control mechanism (270) for controlling a rolling blocking of the double stroller, borne by the front part of the frame and suitable, when the accessory is connected to the stroller by the connection mechanism, for cooperating mechanically with a rolling blocking system, integrated into the stroller, so as to control this blocking system, and an actuating member (280), which is borne by the rear part of the frame so as to be able to be activated by a user standing behind the double stroller, and which is coupled to the control mechanism so as to actuate the latter.

No. of Pages : 54 No. of Claims : 18

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27067

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014000893 A (19) INDIA (22) Date of filing of Application :08/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CODEBOOK SUBSET RESTRICTION FOR ENHANCED TYPE II CHANNEL STATE INFORMATION REPORTING

:H04B0007060000, (71)Name of Applicant : H04B0007045600, 1)APPLE INC. (51) International classification H04L0005000000, Address of Applicant :One Apple Park Way, Cupertino, H04W0072040000, California 95014, United States of America U.S.A. H04L0001000000 (72)Name of Inventor : (31) Priority Document No :201910018336.3 1)ZHANG, Yu (32) Priority Date :09/01/2019 2)ZHANG, Dawei (33) Name of priority country :China 3)SUN, Haitong (86) International Application No :NA 4)ZENG, Wei Filing Date :NA 5)KIM, Yuchul

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A base station may transmit to a device an indication of codebook subset restriction (CBSR), which includes at least a restriction on a frequency basis. The device may receive the indication of CBSR, and may transmit to the base station channel state information (CSI) according to the received indication of CBSR. The indication of CBSR may also include a restriction on a spatial basis and restrict the device from reporting the CSI based on a subset of the frequency basis in addition to the spatial basis per configuration of the base station. The indication of CBSR may include a separately configured maximum allowed amplitude of a weighting coefficient for the spatial basis and the frequency basis, where the weighting coefficient is associated with a column vector of a precoding matrix used by the base station and the device. The number of frequency bases and the frequency compression units may be determined based on a number of different criteria, for example the number of antennas, the number of subbands, etc.

No. of Pages : 54 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27068

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014000894 A (19) INDIA (22) Date of filing of Application :08/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CELL EDGE RELIABILITY IMPROVEMENTS

:H04W0072080000, (71)Name of Applicant : H04W0048200000, 1)APPLE INC. (51) International classification H04W0072040000, Address of Applicant :One Apple Park Way, Cupertino, H04J0011000000, California 95014, United States of America U.S.A. H04W0072120000 (72)Name of Inventor : (31) Priority Document No :201910019132.1 1)SUN, Haitong (32) Priority Date :09/01/2019 2)ZHANG, Wei (33) Name of priority country :China 3)PU, Tianyan (86) International Application No :NA 4)ZHANG, Dawei Filing Date :NA 5)ZENG, Wei (87) International Publication No : NA 6)KIM, Yuchul (61) Patent of Addition to Application 7)ZHANG, Yu :NA Number 8)ZHANG, Wanping :NA Filing Date 9)TANG, Jia (62) Divisional to Application Number :NA 10)LI, Yang

Filing Date :NA

(57) Abstract : Apparatuses, systems, and methods for performing uplink and downlink communication in cell edge scenarios with improved reliability. A wireless device may establish a radio resource control connection with a first cell. The wireless device may determine that a second cell strongly interferes with communication with the first cell. The wireless device may provide an indication that the second cell is a strongly interfering cell to the first cell. The first cell may coordinate with the second cell to transmit data to the wireless device, and to receive data from the wireless device, based at least in part on the indication that the second cell is a strongly interfering cell.

No. of Pages : 54 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27069

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014000908 A (19) INDIA (22) Date of filing of Application :08/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD FOR EVALUATING A CLOGGING LEVEL OF AN AIR FILTER IN AN HVAC UNIT

:B01D0046000000, (71)Name of Applicant : B01D0046520000, 1)ALSTOM TRANSPORT TECHNOLOGIES (51) International classification F24F0011300000, Address of Applicant :48 rue Albert Dhalenne 93400 SAINT- B01D0046240000, OUEN-SUR-SEINE, France France B01D0046440000 (72)Name of Inventor : (31) Priority Document No :19 00196 1)STAINO, Andrea (32) Priority Date :09/01/2019 2)ABOU-EID, Rami

(33) Name of priority country :France (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method for evaluating a clogging level of an air filter (20) of an HVAC unit (5), comprising the following steps: - acquiring a first plurality of parameters (AP) representative of a pressure loss between two sides (28A, 28B) of the air filter at a plurality of moments, - calculating a second plurality of parameters, each being representative of an average of at least some of the parameters over a past time segment, - obtaining a variety of scenarios representative of future operating conditions of the HVAC unit and respectively having a probability pi, - obtaining a parameter representative of a maximum authorized pressure loss between the two sides of the air filter, - for each of the scenarios, calculating a third plurality of parameters representative of a future evolution of the pressure loss on future time segments, and - using the third plurality of parameters!, calculating the clogging level of the air filter in the form either of a likely residual lifetime of the air filter, or of a likelihood that, at the end of a given length of time, the pressure loss will have reached the maximum authorized pressure loss. The invention also relates to a corresponding installation.

No. of Pages : 22 No. of Claims : 12

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27070

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014001167 A (19) INDIA (22) Date of filing of Application :10/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : APPARATUS AND METHOD FOR CONFIGURING BACKHAUL LINK IN WIRELESS COMMUNICATION SYSTEM

:H04W0036140000, (71)Name of Applicant : H04B0007024000, 1)Samsung Electronics Co., Ltd. (51) International classification H04W0052580000, Address of Applicant :129, Samsung-ro, Yeongtong-gu, G06K0009200000, Suwon-si, Gyeonggi-do, 16677, Republic of Korea Republic of H04W0048120000 Korea (31) Priority Document No :10-2019-0003834 (72)Name of Inventor : (32) Priority Date :11/01/2019 1)Yeonchul SHIN (33) Name of priority country :Republic of Korea 2)Hyeongmin NAM (86) International Application No :NA 3)Suhyun KIM Filing Date :NA 4)Inkook CHANG (87) International Publication No : NA 5)Joonsung CHUN (61) Patent of Addition to Application 6)Chulhoon HWANG :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure relates to a pre-5 -Generation (5G) or 5G communication system to be provided for supporting higher data rates Beyond 4 -Generation (4G) communication system such as Long Term Evolution (LTE). A network providing device includes at least one transceiver, and at least one processor operatively coupled with the at least one transceiver. The at least one processor is configured to acquire a measurement result of a signal transmitted by a first cellular network, and transmit, to a router, a control message for setting a router to access a network identified on the basis of the measurement result. The network comprises at least one of the first cellular network and a second cellular network.

No. of Pages : 80 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27071

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014001184 A (19) INDIA (22) Date of filing of Application :10/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : APPARATUS INCLUDING ELECTRONIC CIRCUIT FOR CONTROLLING GAIN OF SIGNAL

:G03G0015000000, (71)Name of Applicant : G06F0017500000, 1)Samsung Electronics Co., Ltd. (51) International classification H04R0001400000, Address of Applicant :129, Samsung-ro, Yeongtong-gu, H04N0007100000, Suwon-si, Gyeonggi-do, 16677, Republic of Korea Republic of G01R0019000000 Korea (31) Priority Document No :10-2019-0003462 (72)Name of Inventor : (32) Priority Date :10/01/2019 1)Youngchang YOON (33) Name of priority country :Republic of Korea 2)Donggyu MINN (86) International Application No :NA 3)Kyuhwan AN Filing Date :NA 4)Sangho LEE

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An apparatus including an electronic circuit. The apparatus includes a path unit configured to form a first impedance for controlling a gain of an input signal. The apparatus also includes a shunt unit configured to form a second impedance for performing attenuation between the path unit and a ground, wherein the path unit forms the first impedance using an on-resistance of at least one transistor.

No. of Pages : 46 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27072

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014001250 A (19) INDIA (22) Date of filing of Application :10/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : "GENERATOR ROTOR AND END WINDING BLOCKING MEMBER FOR A TURBOGENERATOR"

:H02K0015000000, (71)Name of Applicant : H02K0021220000, 1)General Electric Company (51) International classification H02K0015030000, Address of Applicant :One River Road Schenectady, NY H01F0006060000, 12345, United States of America U.S.A. H01F0027280000 (72)Name of Inventor : (31) Priority Document No :19151340.7 1)WALTER Wolfgang (32) Priority Date :11/01/2019 2)AUGE Christian :EUROPEAN 3)GVOZDEVSKIY Denis (33) Name of priority country UNION 4)HOFFMANN Mathias (86) International Application No :NA 5)MINUTH Oliver

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A generator rotor (1) comprises a rotor body (11) and a plurality of conductive windings (21) extending along an axial extent of the rotor body. The conductive windings comprise winding end sections adjacent axial ends of the conductive windings, wherein the winding end sections are bent to comprise axially extending winding end sections (211) and adjacent circumferentially extending winding end sections (212). An axial blocking member (32) is provided between two neighboring circumferentially extending winding end sections (212) and a tangential blocking member (31) is provided between two neighboring axially extending winding end sections (211). An axial blocking member (32) comprises a circumferentially and radially extending wall (321) and a tangential blocking member comprises an axially and radially extending wall (311). At least one seal (313, 323) is provided between each surface of the wall of a blocking member and an adjacent winding end section.

No. of Pages : 23 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27073

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014001562 A (19) INDIA (22) Date of filing of Application :14/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : LUBRICATING STRUCTURE OF HYBRID VEHICLE DRIVE•

:F16H0057040000, (71)Name of Applicant : B60K0017040000, 1)SUZUKI MOTOR CORPORATION (51) International classification B60K0001000000, Address of Applicant :300 Takatsuka-cho, Minami-ku, F16C0033660000, Hamamatsu-shi, Shizuoka 432-8611, Japan Japan B60K0006405000 (72)Name of Inventor : (31) Priority Document No :2019-005192 1)Masahide MIYAZAKI (32) Priority Date :16/01/2019 2)Keiji KITAOKA

(57) Abstract : To provide a lubricating structure of a hybrid vehicle drive device capable of improving lubricating performance of a speed change mechanism and a speed reduction mechanism by increasing the amount of the lubricating oil supplied to the speed change mechanism and the speed reduction mechanism and improving reliability of the speed change mechanism and the speed reduction mechanism. [Solution] In a drive device 4, an input shaft 34, a first intermediate shaft 35, and a second intermediate shaft 36 are provided to be separated from each other in an up and down direction so that a speed reduction mechanism 33 protrudes upward with respect to a speed change mechanism 40 and a transmission casing 5 includes an oil gutter 66 capturing lubricating oil scraped up by a final driven gear and supplying the lubricating oil to the speed change mechanism 40. The oil gutter 66 is provided in a lower portion of the speed reduction mechanism 33 so as to capture lubricating oil scattered from the speed reduction mechanism 33 and flowing downward and includes a pipe portion supplying lubricating oil to an oil circulation space of a bearing holding portion supporting the second intermediate shaft 36 located at the lowest position.

No. of Pages : 64 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27074

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014001769 A (19) INDIA (22) Date of filing of Application :15/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DISPLAY DEVICE

:H01L0051520000, (71)Name of Applicant : G02F0001133300, 1)Samsung Display Co., LTD. (51) International classification H01L0027320000, Address of Applicant :1, Samsung-ro, Giheung-gu, Yongin-si, G09F0009300000, Gyeonggi-do, 17113, Korea Republic of Korea H01L0051000000 (72)Name of Inventor : (31) Priority Document No :10-2019-0005606 1)Jae Young YU (32) Priority Date :16/01/2019 2)Yong Gi KO (33) Name of priority country :Republic of Korea 3)Bon Joo KOO (86) International Application No :NA 4)Yun Ha KIM Filing Date :NA 5)Jae Chun PARK (87) International Publication No : NA 6)Nam Seok BAIK (61) Patent of Addition to Application Number :NA 7)Mikiya ITAKURA Filing Date :NA 8)Hyoung Jin LEE (62) Divisional to Application Number :NA 9)Dae Guen CHOI Filing Date :NA 10)Sung Chul CHOI

(57) Abstract : A display device includes a display panel (200) including a folding region (FR), first and second non-folding regions at opposite sides of the folding region; a first support plate (501) below the display panel (200) to overlap the first non-folding region (NFR1) and to partially overlap the folding region (FR); a first plate coupling film (931) between the display panel and the first support plate (501) to overlap the first non-folding region; a second plate coupling film (932) between the display panel and the second support plate (502) to overlap the second non-folding region (NFR2); a first step compensating member between the display panel (200) and the first support plate (501) to overlap the folding region (FR), apart from the first plate coupling film (931), and including a light shielding layer; and a second step compensating member between the display panel (200) and the second support plate (502) to overlap the folding region (FR), apart from the second plate coupling film (932), and including a light shielding layer.

No. of Pages : 107 No. of Claims : 31

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27075

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014001791 A (19) INDIA (22) Date of filing of Application :15/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : LUBRICATING STRUCTURE OF HYBRID VEHICLE DRIVE DEVICE•

:F16H0057040000, (71)Name of Applicant : B60K0001000000, 1)SUZUKI MOTOR CORPORATION (51) International classification B60K0006405000, Address of Applicant :300 Takatsuka-cho, Minami-ku, B60K0006400000, Hamamatsu-shi, Shizuoka 432-8611, Japan Japan F16H0057021000 (72)Name of Inventor : (31) Priority Document No :2019-005194 1)Masahide MIYAZAKI (32) Priority Date :16/01/2019 2)Keiji KITAOKA

(57) Abstract : To provide a lubricating structure of a hybrid vehicle drive device capable of reliably lubricating a speed reduction mechanism even when the speed reduction mechanism is provided above a speed change mechanism and hence improving reliability of the speed reduction mechanism. [Solution] In a drive device 4, an input shaft 34, a first intermediate shaft 35, and a second intermediate shaft 36 are provided to be separated from each other in an up and down direction so that a speed reduction mechanism 33 protrudes upward with respect to a speed change mechanism 40 and a transmission casing 5 includes an oil pipe 48 supplying lubricating oil to an upper portion of the speed reduction mechanism 33 and a guide groove supplying the lubricating oil supplied from the oil pipe 48 to an oil circulation space inside a bearing holding portion.

No. of Pages : 62 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27076

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014001795 A (19) INDIA (22) Date of filing of Application :15/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : HYBRID VEHICLE DRIVE DEVICE•

:F16H0057040000, (71)Name of Applicant : H02K0007116000, 1)SUZUKI MOTOR CORPORATION (51) International classification B60K0017040000, Address of Applicant :300 Takatsuka-cho, Minami-ku, B60K0001000000, Hamamatsu-shi, Shizuoka 432-8611, Japan Japan F01M0011020000 (72)Name of Inventor : (31) Priority Document No :2019-005193 1)Masahide MIYAZAKI (32) Priority Date :16/01/2019 2)Keiji KITAOKA

(57) Abstract : To provide a hybrid vehicle drive device capable of improving reliability of an oil pipe by preventing an external component of the drive device from interfering with the oil pipe. [Solution] A motor 32 is disposed above a speed change mechanism 61 and a left casing 7 of a transmission case 5 includes a speed reduction mechanism accommodation portion 25 accommodating a speed reduction mechanism 33. Further, the speed reduction mechanism accommodation portion 25 includes an annular wall 7J surrounding the speed reduction mechanism 33 from the circumferential direction and an oil pipe 71 delivering oil to the upper portion of the speed reduction mechanism 33 and the oil pipe 71 is disposed inside the speed reduction mechanism accommodation portion 25 and is routed to the upper portion of the speed reduction mechanism 33 along the inner peripheral surface of the annular wall 7J. The oil pipe 71 is fixed to the speed reduction mechanism accommodation portion 25 at an upstream end portion 71A in the oil flow direction and a fastening portion 7IB.

No. of Pages : 29 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27077

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014001914 A (19) INDIA (22) Date of filing of Application :16/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BALLAST WATER TREATMENT SYSTEM

:G01N0033533000, (71)Name of Applicant : H05B0031000000, 1)ENVIROCLEANSE LLC (51) International classification B01J0020286000, Address of Applicant :22762 Westheimer Pkwy, Suite 515, C02F0003280000, Katy, Texas 77450, United States of America U.S.A. B63C0007260000 (72)Name of Inventor : (31) Priority Document No :62/792,953 1)HENRY, Kent D. (32) Priority Date :16/01/2019 2)STANKA, James (33) Name of priority country :U.S.A. 3)HUGHES, Matt (86) International Application No :NA 4)WAID VI, Charlie Robert

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a ballast water treatment system and method. The ballast water treatment system comprises of at least one ballast tank, at least one mixing nozzle, a treatment unit, wherein the treatment unit comprises an electrochlorination module and a dechlorination module, a dosing module, wherein the dosing module is coupled to the treatment unit, and a control system. The method comprises introducing ballast water into at least one ballast tank disposed on the vessel, circulating at least a portion of the ballast water between the at least one ballast tank and a dosing module, generating a disinfectant via a treatment unit, wherein the treatment unit comprises an electrochlorination unit and a dechlorination module, and delivering the disinfectant from the treatment unit to the circulating ballast water at the dosing module.

No. of Pages : 30 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27078

(12) PATENT APPLICATION PUBLICATION (21) Application No.202014001915 A (19) INDIA (22) Date of filing of Application :16/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BALLAST WATER TREATMENT SYSTEM

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

No. of Pages : 30 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27079

(12) PATENT APPLICATION PUBLICATION (21) Application No.202017002265 A (19) INDIA (22) Date of filing of Application :18/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : NETWORK FUNCTION INSTANCE SELECTION

:H04W 48/18, H04W (71)Name of Applicant : (51) International classification 48/16, H04W 60/00 1)TELEFONAKTIEBOLAGET LM ERICSSON (PUBL) (31) Priority Document No :PCT/CN2018/072579 Address of Applicant :SE-164 83 Stockholm Sweden (32) Priority Date :15/01/2018 (72)Name of Inventor : (33) Name of priority country :China 1)WANG, Cheng (86) International Application No :PCT/EP2019/050931 2)CASTELLANOS ZAMORA, David Filing Date :15/01/2019 3)TORVINEN, Vesa (87) International Publication No :WO/2019/138133 4)PRAJWOL KUMAR, Prajwol

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Network equipment (26) in a wireless communication network is configured to receive at least a portion of a subscription concealed identifier, SUCI, (34) for a subscriber (13). The SUCI (34) contains a concealed subscription permanent identifier, SUPI, (20) for the subscriber (13). The received at least a portion of the SUCI (34) indicates a sub-domain code, SDC, (32). The 5 SDC (32) indicates a certain sub-domain, from among multiple sub-domains (30-1, 30-2,¦30- N) of a home network of the subscriber (13), to which the subscriber (13) is assigned. The network equipment (26) is also configured to determine, based on the SDC (32) and from among multiple instances (24-1, 24-2,¦24-M) of a provider network function in the home network respectively allocated to provide a service to be consumed for subscribers assigned to 10 different sub-domains, an instance of the provider network function to provide the service to be consumed for the subscriber (13).

No. of Pages : 37 No. of Claims : 35

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27080

(12) PATENT APPLICATION PUBLICATION (21) Application No.202017009295 A (19) INDIA (22) Date of filing of Application :04/03/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD FOR MANUFACTURING STEEL H-BEAM

:B21B 1/08, B21B (71)Name of Applicant : (51) International classification 1/088 1)NIPPON STEEL CORPORATION (31) Priority Document No :2018-007095 Address of Applicant :6-1, Marunouchi 2-chome, Chiyoda-ku, (32) Priority Date :19/01/2018 Tokyo 1008071 Japan (33) Name of priority country :Japan (72)Name of Inventor : (86) International Application No :PCT/JP2019/000690 1)YAMASHITA, Hiroshi

Filing Date :11/01/2019 (87) International Publication No :WO/2019/142734 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention makes it possible to manufacture a large steel H-beam product efficiently and stably by improving production efficiency for flanges and performing flat shaping rolling on a large blank without giving rise to problems such as elongation in the direction of web height and deformation of parts corresponding to flanges. A rough rolling step has an edging rolling step for rolling material to be rolled so as to be formed into a prescribed substantially dog bone shape and a flat rolling step for rotating the material to be rolled 90° or 270° after edging rolling is completed and carrying out rolling of the web parts. Among the calibers for performing the flat rolling step, upper and lower caliber rolls for at least one caliber are provided with, in the center part of the roll body length of the upper and lower caliber rolls, a recessed part that forms a protrusion in the center of the web part of the material to be rolled. The width of the protrusion formed in the flat rolling step is set at 25 “ 50% of the inside dimension of the web part of the material to be rolled, and the thickness of the web part rolled in the flat rolling step is set to a prescribed thickness that is thicker than the web part thickness at the start of an intermediate rolling step.

No. of Pages : 35 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27081

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821002131 A (19) INDIA (22) Date of filing of Application :18/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SYSTEM FOR MIXING HOT AND COLD WATER

:G05D0023130000, (71)Name of Applicant : E03B0007040000, 1)Kishan Ramjibhai Savaliya (51) International classification F25B0029000000, Address of Applicant :A66, Alap Royal Palm, Near Bapa B01F0005040000, Sitaram Chowk, Mavdi Main Road, Mavdi, Rajkot “ 360004 F24H0009120000 Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Kishan Ramjibhai Savaliya

(57) Abstract : The present invention relates to a system for mixing hot and cold water. The system (200) comprising a mixer (M) receiving a hot water main pipe (H) supplying the hot water and a cold water main pipe (C) supplying the cold water to the mixer (M); a regulator (R) regulating flow of the hot water and the cold water in the mixer (M), and an auxiliary tank (206) connecting with the mixer (M) through the cold water main pipe (C), the auxiliary tank (206) receiving the cold water accumulated in the hot water main pipe (H) through the cold water main pipe (C) by a back-flow based on a pre-determined instruction to the regulator (R). Hence, an optimum level of water mixing is achieved by the present system of mixing water, without any wastage of water.

No. of Pages : 23 No. of Claims : 12

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27082

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821004202 A (19) INDIA (22) Date of filing of Application :05/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : A COMPOSITION FOR SINTERED LIGHTWEIGHT AGGREGATE AND A METHOD OF PREPARING THE SAME.

:C04B0018020000, (71)Name of Applicant : C04B0028020000, 1)Aditya Birla Science and Technology Company Private (51) International classification C08L0095000000, Limited A61K0035280000, Address of Applicant :Aditya Birla Center, 2nd Floor, 'C' C04B0020060000 wing, S.K. Ahire Marg, Mumbai - 400030. Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Moghul Sirajuddin (33) Name of priority country :NA 2)Hemantkumar Aiyer (86) International Application No :NA 3)Amit Chatterjee

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT A composition for sintered lightweight aggregate and a method of preparing the same. [027] According to the present invention, there is provided a composition for sintered lightweight aggregate compromising, by weight of the composition, 60 “ 90 % of fly ash; (8 “ 30 % of red mud; 0.1 “ 10 % of clay; and 0.1 “ 1 % of solid carbonaceous material. The present invention also provides a method of preparing lightweight aggregate comprising the steps of homogenously mixing, by weight of the composition, 60 “ 90 % of fly ash, 8 “ 30 % of red mud, 0.1 “ 10 % of clay and 0.1 “ 1 % of solid carbonaceous material; granulating the mixture into pellets; drying the pellets at 80-100 degrees for 60-70 minutes; and sintering the pellets at 1100-1200 degrees for 5-20 minutes.

No. of Pages : 11 No. of Claims : 12

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27083

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821005052 A (19) INDIA (22) Date of filing of Application :09/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS FOR RECOVERING VANADIUM IN THE FORM OF IRON VANADATE FROM A GASIFIER SLAG

:C22B0034220000, (71)Name of Applicant : C04B0018140000, 1)RELIANCE INDUSTRIES LIMITED (51) International classification C22B0034320000, Address of Applicant :3RD FLOOR, MAKER CHAMBER- C22B0007040000, IV, 222, NARIMAN POINT, MUMBAI-400021, C01G0031000000 MAHARASHTRA INDIA Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)DAGGUPATI Sateesh (33) Name of priority country :NA 2)MAJHI Sachchit (86) International Application No :NA 3)MANDAL Sukumar Filing Date :NA 4)DAS Asit Kumar (87) International Publication No : NA 5)SAPRE AJIT Vishwanath

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT PROCESS FOR RECOVERING VANADIUM IN THE FORM OF IRON VANADATE FROM A GASIFIER SLAG The present disclosure relates to a process for recovering vanadium in the form of iron vanadate from a gasifier slag. The process comprises pulverizing the slag to obtain pulverized slag (2). The pulverized slag (2) is soaked in water (6) and an alkali salt (4) to obtain a slurry (8), followed by roasting the slurry in the presence of air to obtain roasted slag (12) which is leached (14) to obtain a first solution (18). The first solution (18) is heated at a temperature in the range of 60°C to 80°C while adding an iron salt (17) in an amount in the range of 10 wt% to 60 wt% at a pH in the range of 4 to 10, to obtain a second solid residue (21) which is dried to obtain iron vanadate (24).

No. of Pages : 27 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27084

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821005258 A (19) INDIA (22) Date of filing of Application :12/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : MEANS FOR INDICATING THE MODES OF OPERATION OF A PUMPING AND TRAPPING DEVICE

:F24H0008000000, (71)Name of Applicant : F01N0011000000, 1)FORBES MARSHALL PVT. LTD. (51) International classification F02B0075120000, Address of Applicant :A 34-35, MIDC Estate, H Block, F28B0001020000, Pimpri, Pune 411018, Maharashtra, India Maharashtra India F04B0037080000 (72)Name of Inventor : (31) Priority Document No :NA 1)KIRLOSKAR, Akshay (32) Priority Date :NA 2)NARAGUDE, Atul

(57) Abstract : ABSTRACT MEANS FOR INDICATING THE MODES OF OPERATION OF A PUMPING AND TRAPPING DEVICE The present disclosure envisages means for indicating the modes of operation of a pumping and trapping device (50). The means is configured to detect the modes based on pressure differential between the condensate inlet (56) and the condensate outlet (58) and between the shell bypass (57) and the condensate outlet (58) and the temperatures at the shell bypass (57) and the condensate outlet (58) of said device (50), the modes being a trapping mode comprising the conditions of working, steam leak, water log and stall, and a pumping mode comprising a filling cycle and a pumping cycle. The means can be easily retrofitted with existing pumping and trapping devices and has a simple configuration.

No. of Pages : 33 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27085

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821005271 A (19) INDIA (22) Date of filing of Application :12/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : EUO PHASE CONTAINING MRE TYPE OF ZEOLITE AND APPLICATION THEREOF IN HYDROISOMERIZATION

:C07C0005270000, (71)Name of Applicant : B01J0029740000, 1)Bharat Petroleum Corporation Ltd. (51) International classification C01B0039480000, Address of Applicant :Bharat Bhavan, 4 & 6 Currimbhoy B01J0029080000, Road, Ballard Estate, Mumbai-400 001, Maharashtra, India. B01J0035000000 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)DAS, Raj Kumar (33) Name of priority country :NA 2)KUPPUSAMY, Munusamy (86) International Application No :NA 3)SONTYANA, Ananth Kishore Kumar Filing Date :NA 4)PAI, Shivanand Mukund (87) International Publication No : NA 5)NEWALKAR, Bharat Lakshman

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure relates generally to the field of zeolites. Particularly, the present disclosure provides a new crystalline family of MRE type zeolite containing an additional phase of EUO in an amount of more than 5% by weight of total zeolite that exhibits unique pore geometry and distinctive XRD pattern. Aspects of the present disclosure also relates to a method of preparation of a new crystalline family of MRE type zeolite (MRE/EUO) containing an additional phase of EUO in an amount of more than 5% by weight of total zeolite. The MRE/EUO zeolites of the present disclosure exhibit low aspect ratio and hence, curtail hydrocracking characteristics and exhibit high isomerization selectivity. Further aspects of the present disclosure provide a catalyst containing at least one MRE/EUO zeolite of the present disclosure and at least one noble metal supported thereon, and a method of preparation thereof, that finds utility in effecting hydroisomerization of C12 to C40 n-paraffins.

No. of Pages : 45 No. of Claims : 18

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27086

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821005275 A (19) INDIA (22) Date of filing of Application :12/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD OF DELIVERING AND DEPOSITING FRAGRANT OIL CONTAINING AMINOPLAST MICROCAPSULES ONTO FABRIC SURFACES WHEN INCORPORATED IN RINSE OFF FABRIC CLEANING FORMATS

:C11D0003500000, (71)Name of Applicant : C11D0003120000, 1)S H KELKAR AND COMPANY LIMITED (51) International classification B01J0013180000, Address of Applicant :S H Kelkar And Company Limited LBS C11D0017000000, Marg, Near Balrajeshwar Temple, Mulund (West), Mumbai C11D0003370000 Maharashtra INDIA 400080 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Dr Debojit Chakrabarty (33) Name of priority country :NA 2)Ms. Pragya Sahare (86) International Application No :NA 3)Mrs. Ankita Rokde Filing Date :NA 4)Mrs. Swati Mahadik (87) International Publication No : NA 5)Chintaman T Bondar

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT TITLE: Method of delivering and depositing fragrant oil containing aminoplast microcapsules onto fabric surfaces when incorporated in rinse off fabric cleaning formats Slurry formulation of fragrance capsules and a novel method of formulating the same is provided favouring a free flowing premix powder containing hard shell capsules including melamine: formaldehyde (MF for brevity) fragrance capsules, and, having the same delivered onto fabrics when incorporated through rinse off formats like detergent powders and laundry liquids. Fig 1a

No. of Pages : 40 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27087

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821005332 A (19) INDIA (22) Date of filing of Application :13/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SYSTEM FOR DETECTING VARIATIONS IN MOTOR MOVEMENTS

:A61B0005110000, (71)Name of Applicant : G06F0011360000, 1)INDIAN INSTITUTE OF TECHNOLOGY (51) International classification G06K0009620000, GANDHINAGAR G06K0009460000, Address of Applicant :Indian Institute of Technology H04W0004900000 Gandhinagar, Palaj, Gandhinagar, -382355 Gujarat, India. Gujarat (31) Priority Document No :NA India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)SHAH, Vrutangkumar Vinodkumar (86) International Application No :NA 2)PALANTHANDALAM-MADAPUSI, Harish J.

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT A SYSTEM FOR DETECTING VARIATIONS IN MOTOR MOVEMENTS The present disclosure envisages a system (100) for detecting variations in motor movements. The system (100) comprises a sensing module (20), an analyzer (30), a database (40), a comparator (50) and a detection module (60). The sensing module (20) is configured to periodically sense response of a test user when subjected to an external stimulation and generate a value. The analyzer (30) is configured to cooperate with the sensing module to analyze response time to generate a current analyzed test data. The comparator (40) is configured to cooperate with the analyzer and the database to generate a comparison data. The detection module (60) is configured to cooperate with the comparator (50) to detect whether the response of the motor movements of the test user is normal or abnormal based on the received comparison data.

No. of Pages : 18 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27088

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821005456 A (19) INDIA (22) Date of filing of Application :13/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : BIOMIMETIC THREE-DIMENSIONAL HYBRID SCAFFOLD FOR BONE REGENERATION AND METHOD FOR PREPARING THE SAME

:H04N0019105000, (71)Name of Applicant : G06K0015020000, 1)Indian Institute of Technology Bombay (51) International classification A61Q0017040000, Address of Applicant :Powai, Mumbai-400076, Maharashtra, H04N0019167000, India Maharashtra India A61K0031198000 (72)Name of Inventor : (31) Priority Document No :NA 1)Bellare Jayesh (32) Priority Date :NA 2)Vashisth Priya

(57) Abstract : ABSTRACT BIOMIMETIC THREE-DIMENSIONAL HYBRID SCAFFOLD FOR BONE REGENERATION AND METHOD FOR PREPARING THE SAME The present invention relates to a three dimensional hybrid scaffold. The scaffold comprises of core- sheath nanofillers and a hydrogel. The nanofibers are made up of gelatin/ Poly ε-caprolactone (PCL) embedded with hydroxyapatite (HA) nanocrystals. The nanofillers are in the form of a tightly coiled spiral rings in the hydrogel. The present invention also relates to a process of preparing the three dimensional hybrid scaffolds. The biomimetic hybrid scaffold consists of coiled rings of nanofibers in highly porous hydrogel matrix showing structural similarity to osteons. In addition, the reinforcement of electrospun nanofibrous spiral rings in hydrogel is found to influence the mechanical property by increasing the compressive modulus of overall scaffold.

No. of Pages : 30 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27089

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821006121 A (19) INDIA (22) Date of filing of Application :17/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN INSECT REPELLENT COMPOSITION AND AN INSECT REPELLENT FABRIC

:D06N0003000000, (71)Name of Applicant : A01N0053000000, 1)TANVEER DASWANI (51) International classification D06M0016000000, Address of Applicant :51 SNEH SADAN, OPPOSITE A01N0025340000, COLABA POST OFFICE, MUMBAI 400 005, A01N0025040000 MAHARASHTRA, INDIA Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)TANVEER DASWANI

(57) Abstract : ABSTRACT AN INSECT REPELLENT COMPOSITION AND AN INSECT REPELLENT FABRIC An insect repellent composition comprising: permethrin in an amount by weight of 25% to about 50%; ethoxylated Castor oil in an amount by weight of 25% to 50%; and benzyl alcohol in an amount by weight of 15% to 45%.

No. of Pages : 25 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27090

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821006367 A (19) INDIA (22) Date of filing of Application :20/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : A METHOD FOR CONTROLLING LEVEL OF LIQUID WITHIN AN EVAPORATOR AND A SYSTEM THEREOF

:F25B0049020000, (71)Name of Applicant : F25B0041060000, 1)Blue Star Limited (51) International classification F25B0049000000, Address of Applicant :Kasturi Buildings, Mohan T. Advani G05D0009120000, Chowk, Jamshetji Tata Road, Mumbai “ 400 020, Maharashtra G09G0005020000 India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Sandeep Pasarkar (33) Name of priority country :NA 2)Zaid Hetavkar

(57) Abstract : The present invention discloses a method of controlling level of liquid within an evaporator of a flooded-type chiller without level sensors, the flooded-type chiller having components including at least one compressor, a condenser, an expansion valve and an evaporator. According to an aspect, a plurality of sensors positioned in the system measures a plurality of first group of parameter information values and a controller calculates a plurality of second group of parameter information values based on said measured values and further determines a virtual refrigerant level as a control signal based on said second group of parameter information values. Based on determined virtual refrigerant level the controller controls operation of the expansion valve (opens/ closes/ holds) with respect to a dead zone for maintaining a pre-defined target refrigerant level thereby the desired refrigerant level and oil in the evaporator. Figure of Abstract : FIGURE 3

No. of Pages : 46 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27091

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821006453 A (19) INDIA (22) Date of filing of Application :20/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : A DOCK LEVELER

:B65G0069280000, (71)Name of Applicant : B65G0069000000, 1)MAHINDRA LOGISTICS LTD (51) International classification G06F0001160000, Address of Applicant :Techniplex - 1, Techniplex complex, F04D0029280000, 4th floor, Unit number 23A, Veer Savarkar Fly over, Goregaon - F04D0029300000 West, Mumbai - 400 062, Maharashtra, India Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)AMBALATHKHALID THAHIR (33) Name of priority country :NA 2)SAMANT NIKHIL (86) International Application No :NA 3)SHAH TEJAS S

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT A DOCK LEVELER A dock leveler for bridging a gap between a loading bay and a carrier bed of a vehicle parked adjacent to the loading bay is provided. The dock leveler comprises of a main plate, a front plate pivotally adapted to front side of the main plate, a rear plate pivotally adapted to rear side of the main plate, the front plate and the rear plate capable of being in a deployed position or a storage position, in the deployed position the front plate and the rear plate are horizontally oriented with respect to the main plate, in the storage position the front plate and the rear plate are vertically oriented with respect to the main plate. In the deployed position, the dock leveler can be used for loading/unloading and in the storage position, the dock leveler can be easily moved and/or stored when the dock leveler is not in use. Reference Figure 1

No. of Pages : 19 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27092

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821006679 A (19) INDIA (22) Date of filing of Application :21/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : NOVEL INTERMEDIATES AND THEIR USE IN PREPARATION OF CLOFARABINE

:C07D0405040000, (71)Name of Applicant : C07C0069608000, 1)ALEMBIC PHARMACEUTICALS LIMITED (51) International classification C07C0067313000, Address of Applicant :Alembic Research Centre, Alembic C07D0263060000, Pharmaceuticals Limited , Alembic Road, Vadodara-390 003. A61K0031750000 Gujarat, India. Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)DHAMELIYA, Dharmesh (33) Name of priority country :NA 2)KONDEPATI, Venkata Ramana (86) International Application No :NA 3)SIRIPRAGADA, Mahender Rao

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : TITLE OF THE INVENTION: NOVEL INTERMEDIATES AND THEIR USE IN PREPARATION OF CLOFARABINE ABSTRACT The present invention relates to the novel intermediates and their use in preparation of Clofarabine of formula (I). Dated this 18th day of Feb. 2019 Dr. S. Ganesan

No. of Pages : 28 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27093

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821007022 A (19) INDIA (22) Date of filing of Application :23/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR PRE-EMPTIVE DEVIATION DETECTION FOR TELECOM PROCESS FLOW USING DIGITAL TWIN

:G06F0011000000, (71)Name of Applicant : F02D0041140000, 1)Tata Consultancy Services Limited (51) International classification G06Q0010000000, Address of Applicant :Nirmal Building, 9th Floor, Nariman G11C0029520000, Point, Mumbai 400021, Maharashtra, India Maharashtra India G05B0019418000 (72)Name of Inventor : (31) Priority Document No :NA 1)BHATTACHARYA, Kaustav (32) Priority Date :NA 2)VISWANATHAN, Sankaranarayanan (33) Name of priority country :NA 3)NATARAJAN, Senthilvelan (86) International Application No :NA 4)SEKAR, Arunkumar

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method and a system for pre-emptive deviation detection for a telecom process flow using digital twin. The method and system pre- emptively detects critical failures in the telecom process flow even before they occur by pre-emptively detecting deviations based on digital twin. The proposed pre-emptive deviation is dynamically detected based on digital twin wherein, a simulated digital twin of telecom process flow is compared with a simulated predicted telecom process flow. Further based on pre-emptively detected deviation, notifications are displayed to execute preventive measures to ensure critical failures are avoided.

No. of Pages : 43 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27094

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821007142 A (19) INDIA (22) Date of filing of Application :26/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : STABLE LYOPHILIZED COMPOSITION OF CYCLOPHOSPHAMIDE

:A61K0009190000, (71)Name of Applicant : A61K0031675000, 1)Intas Pharmaceuticals Ltd. (51) International classification A61K0047260000, Address of Applicant :Intas Pharmaceuticals Ltd. Corporate A61K0031704000, House, Near Sola Bridge, S. G. Highway, Thaltej, Ahmedabad - A61K0031664000 380054, Gujarat, India. Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Aditya M. Patel (33) Name of priority country :NA 2)Kerul C. Patel (86) International Application No :NA 3)Dhaval V. Dadhaniya

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Stable lyophilized composition of Cyclophosphamide• ABSTRACT This present invention relates to a stable lyophilized composition of Cyclophosphamide. The said stable lyophilized composition of Cyclophosphamide provides an improved moisture content than the lyophilized Cyclophosphamide compositions obtained by the conventional lyophilization method. Further, the invention relates to a process for preparation of the said stable lyophilized composition of Cyclophosphamide, wherein the said process comprises controlled lyophilization with freezing and annealing at a temperature above 0 0C.

No. of Pages : 17 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27095

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821007249 A (19) INDIA (22) Date of filing of Application :26/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : A WATER CONSERVATION SYSTEM

:E03B0001040000, (71)Name of Applicant : A61M0016010000, 1)VISHESH DEWAN (51) International classification B01D0021340000, Address of Applicant :A/26/27/59 Dewan-e-Khas Nyati E21B0047000000, Highlands Near Corinthians Club Hadapsar, Pune Maharashtra E21B0047100000 INDIA 411028 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)VISHESH DEWAN

(57) Abstract : ABSTRACT A WATER CONSERVATION SYSTEM The present disclosure envisages a water conservation system (100). System (100) comprises a reservoir (106), a valve (102), an actuator (104), a first sensor (202), a second sensor (204) and a control unit (208). Reservoir (106) receives water draining from a predefined space. Valve (102) diverts draining water, in a first mode, towards reservoir (106), and, in a second mode, away from the reservoir (106). Actuator (104) selectively actuates the diverter valve (102) between first and second modes. First sensor (202) generates a first signal on detection of water flow. Second sensor (204) generates a second signal on detection of an activity makes water unclean. Control unit (208) receives first signal and second signal and switches the valve (102) between first and second mode. By automating storage of relatively clean water, that otherwise enters sewer lines from bathroom drains, in the reservoir (106), system (100) reduces water wastage.

No. of Pages : 25 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27096

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821007257 A (19) INDIA (22) Date of filing of Application :26/02/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN APPARATUS FOR COOLING MILK CANS

:A01J0009040000, (71)Name of Applicant : F25D0031000000, 1)SERAP INDIA PRIVATE LIMITED (51) International classification B67D0001080000, Address of Applicant :Plot No. 714 & 715 G. I. D. C., A23C0003040000, Manjusar Taluka Savli Vadodara Gujarat India 391775 Gujarat F25D0017020000 India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)GAUBERT Jean Paul (33) Name of priority country :NA 2)LELONG Hubert (86) International Application No :NA 3)KULKARNI Sadanand Filing Date :NA 4)PATEL Rakesh

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An apparatus for cooling milk cans comprises cooling apparatus comprises of upper portion cooling unit consisting of compressor unit agitator motor submersible lower portion consisting of cooling coils and agitator on main frame connected with upper portion of apparatus The present invention cooling apparatus lower portion is submerged in cooling tank contains cooling liquid for cooling milk cans. The cooling tank contains cooling liquid in which milk cans are cooled by indirect cooling by reducing the temperature of the cooling liquid (water).

No. of Pages : 21 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27097

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821008248 A (19) INDIA (22) Date of filing of Application :06/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : STERILE INJECTABLE COMPOSITION COMPRISING MELPHALAN•

:A61K0009000000, (71)Name of Applicant : A61K0047100000, 1)CADILA HEALTHCARE LIMITED (51) International classification A61K0047240000, Address of Applicant :Zydus Tower, Satellite Cross Roads, A61K0047020000, Ahmedabad “ 380015, Gujarat, India Gujarat India A61K0031728000 (72)Name of Inventor : (31) Priority Document No :NA 1)MUTHAIYYAN, Kannan Essakimuthu (32) Priority Date :NA 2)SINGH, Debjani Manoj (33) Name of priority country :NA 3)KHATRI, Nirav Ishwarlal (86) International Application No :NA 4)SHARMA, Omprakash Ganesh Ram

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT STERILE INJECTABLE COMPOSITION COMPRISING MELPHALAN The present invention relates to sterile injectable compositions comprising melphalan and one or more phospholipids. The present invention also relates to processes for preparing the sterile injectable compositions.

No. of Pages : 29 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27098

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821008249 A (19) INDIA (22) Date of filing of Application :06/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : STERILE INJECTABLE COMPOSITION COMPRISING CARFILZOMIB•

:A61K0009000000, (71)Name of Applicant : A61K0047100000, 1)CADILA HEALTHCARE LIMITED (51) International classification A61K0047240000, Address of Applicant :Zydus Tower, Satellite Cross Roads, A61K0031728000, Ahmedabad “ 380015, Gujarat, India Gujarat India A61K0047020000 (72)Name of Inventor : (31) Priority Document No :NA 1)MUTHAIYYAN, Kannan Essakimuthu (32) Priority Date :NA 2)SINGH, Debjani Manoj (33) Name of priority country :NA 3)KHATRI, Nirav Ishwarlal (86) International Application No :NA 4)SHARMA, Omprakash Ganesh Ram

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT STERILE INJECTABLE COMPOSITION COMPRISING CARFILZOMIB The present invention relates to sterile injectable compositions comprising carfilzomib and one or more phospholipids. The present invention also relates to processes for preparing the sterile injectable compositions.

No. of Pages : 34 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27099

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821008769 A (19) INDIA (22) Date of filing of Application :09/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : IMPROVED PROCESS FOR PREPARATION OF PYRROLO[2,3-B]PYRIDIN-5-OL

:C07D0471040000, (71)Name of Applicant : H01L0027120000, 1)Aarti Industries Limited (51) International classification H01L0029660000, Address of Applicant :71, Udyog kshetra, 2ndFloor, Mulund C07D0487040000, Goregaon Link Road, Mulund (W), Mumbai-400080, Maharashtra C07C0269060000 India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Parimal Hasmukhlal Desai (33) Name of priority country :NA 2)Bharatkumar Surendra Patravale

(57) Abstract : Provided herein is an improved process for the preparation of 1H-pyrrolo[2,3-b]pyridin-5-ol, which is useful in the preparation of a key intermediate of Venetoclax. Said process increases the % yield of intermediates by about 96% to 99%. 10

No. of Pages : 31 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27100

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821010137 A (19) INDIA (22) Date of filing of Application :20/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : NOVEL KIT FOR DETECTION OF GENES ENCODING FOR EXTENDED SPECTRUM LACTAMASES (ESBL)

:C12Q0001689000, (71)Name of Applicant : C12N0015100000, 1)HIMEDIA LABORATORIES PVT. LTD (51) International classification C12Q0001686000, Address of Applicant :A-516, SWASTIK DISHA BUSINESS C12Q0001685100, PARK, VADHANI INDUSTRIAL ESTATE, L.B.S. MARG, C12Q0001680400 MUMBAI - 400086 INDIA Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Dr. RAJAS WARKE

(57) Abstract : Provided is a novel kit for detection of genes encoding for extended spectrum -lactamases from a sample, the said kit comprising primer-probe sets that can be simultaneously used to perform a multiplex real-time polymerase chain reaction for detecting at least one gene from extended spectrum -lactamases. Thisdetection method allows to classify a large number of ESBL by applying the developed primer-probe sets that can be applied at the same time in a single PCR reaction at the same time which relates to the multiplex PCR technique.

No. of Pages : 10 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27101

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821010205 A (19) INDIA (22) Date of filing of Application :20/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : MONOMETALLIC INLET VALVE FOR CRAIL ENGINE WITH HARDENED TAPPET END

:C21D0001100000, (71)Name of Applicant : C22C0038060000, 1)Durovalves India Pvt. Ltd. (51) International classification C22C0038020000, Address of Applicant :F-57-58, MIDC Industrial Area, Waluj, C22C0038220000, Aurangabad “ 431136, Maharashtra, Maharashtra India C22C0038040000 (72)Name of Inventor : (31) Priority Document No :NA 1)Gurunathan Ramnathan (32) Priority Date :NA 2)Nanasaheb Zoal (33) Name of priority country :NA 3)Jitendra Sharma

(57) Abstract : This invention comprises a monometallic inlet valve for a CRAIL engine developed in a steel material that can be hardened. The steel material used may be amenable for induction hardening. In one embodiment, the steel material used is Martensitic EN-52 grade steel. In one embodiment, the inlet valve for a CRAIL engine is induction hardened at tappet end. The the tappet end hardness may be 52 HRC min and through hardening depth is 12-16mm with Barrel hardness 490hv30 min. The inlet valve of this invention is designed to perform under common CRAIL engine operating boundary conditions of peak combustion pressure 180 bar and maximum predefined combustion temperature 780°C. The monometallic inlet valve for a CRAIL engine according to this invention has the Design of Safety of 3.66.

No. of Pages : 17 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27102

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821010312 A (19) INDIA (22) Date of filing of Application :21/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : INTEGRATED AIR FILTER HOUSING

:B62D0033060000, (71)Name of Applicant : F02M0035020000, 1)Mahindra & Mahindra Limited (51) International classification G07C0005080000, Address of Applicant :Mahindra Towers, G.M. Bhosale Marg, B60H0001240000, Worli, Mumbai- 400 018, Maharashtra, India. Maharashtra India B01D0046000000 (72)Name of Inventor : (31) Priority Document No :NA 1)Kishor Shripati Jadhav (32) Priority Date :NA 2)Mahesh Suresh Nikam (33) Name of priority country :NA 3)Prannoy Sarkar (86) International Application No :NA 4)Shrikant Narayanrao Baviskar

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : INTEGRATED AIR FILTER HOUSING Abstract Disclosed is an integrated air filter housing (100) for an automobile vehicle (150). 5 The housing (100) is made up of a sheet metal of a cabin portion and integrated with a cabin floor (120) of a driver™s cabin. The integration of the housing (100) with the cabin reduces assembly line fitment time and improves roll down jobs per hour time. The integrated housing (100) saves the space for fitting a separate air filter hence more space is available in an engine compartment and below or inside the vehicle cabin. The integrated housing (100) does not require separate mounting arrangement thereby saving the cost for brackets, clamps, fasteners, rubber isolator, tooling and the service cost. Figure 3

No. of Pages : 12 No. of Claims : 2

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27103

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821010335 A (19) INDIA (22) Date of filing of Application :21/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : MULTI OPERATION MACHINING CENTRE

:F16C0033640000, (71)Name of Applicant : B23Q0039020000, 1)BHARAT FORGE LIMITED (51) International classification B23Q0039000000, Address of Applicant :BHARAT FORGE LIMITED, B23B0005080000, MUNDHWA, PUNE 411036, MAHARASHTRA, INDIA B23B0051080000 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)BABASAHEB N. KALYANI (33) Name of priority country :NA 2)KULTAR SINGH (86) International Application No :NA 3)SAGAR INAMDAR

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT MULTI OPERATION MACHINING CENTRE The present subject matter discloses a multi-operation machining apparatus to carry out various machining operations, such as End machining, Oil hole drilling, End Turning in lieu of End Grinding, Balancing, on a forged crankshaft. The machining operations are performed on a single multi-operation machining apparatus. Further, the task of End grinding may be replaced by the multi-tasking multi-operation machining apparatus with end turning task amounting to grinding tool cost saving. <>

No. of Pages : 18 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27104

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821010383 A (19) INDIA (22) Date of filing of Application :21/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN IMPROVED ASYMMETRIC SYNTHESIS OF ALPHA-(DIARYLMETHYL) ALKYL AMINES

:C07D0295155000, (71)Name of Applicant : C07D0295096000, 1)PIRAMAL ENTERPRISES LIMITED (51) International classification C07D0401060000, Address of Applicant :Piramal Ananta, Agastya Corporate C07D0213300000, Park,Opposite Fire Brigade, Kamani Junction, LBS Marg, Kurla C07D0405060000 (West) Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)LELETI, Rajender Reddy (33) Name of priority country :NA 2)KOTTURI,Sharadsrikar (86) International Application No :NA 3)WAMAN, Yogesh Filing Date :NA 4)PATEL,Chirag (87) International Publication No : NA 5)SHENOY,Rajesh

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT AN IMPROVED ASYMMETRIC SYNTHESIS OF alpha-(DIARYLMETHYL) ALKYL AMINES The present invention relates to an improved asymmetric synthesis of alpha-(diarylmethyl) alkyl amines (hereafter referred to as the compound (1)) or its pharmaceutically acceptable salt and derivatives. The process comprises an unusual substrate specific regioselective lithiation of alpha-diarylmethanes, followed by its highly diastereoselective addition to N-tert-butanesulfinylimines resulting in the selective formation of chiral alpha-(diarylmethyl) alkyl amines 4 and chiral amine 5; which on subsequently removing the sulfinyl group provides corresponding alpha-(diarylmethyl) alkyl amines (1) or relative chiral amines (1•). To, The Controller of Patents The Patent Office At Mumbai.

No. of Pages : 27 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27105

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821010428 A (19) INDIA (22) Date of filing of Application :21/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SYSTEM FOR DETECTION AND COLLECTION OF POLLUTANT OBJECTS AND METHOD THEREOF

:B64C0039020000, (71)Name of Applicant : G06K0009000000, 1)ZENSAR TECHNOLOGIES LIMITED (51) International classification G06T0011600000, Address of Applicant :ZENSAR KNOWLEDGE PARK, G01N0001100000, PLOT # 4, MIDC, KHARADI, OFF NAGAR ROAD, PUNE- G05D0001000000 411014, MAHARASHTRA, INDIA Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)KUMAR Anand Yashwanth (33) Name of priority country :NA 2)NAMBIAR Ullas Balan

(57) Abstract : ABSTRACT A SYSTEM FOR DETECTION AND COLLECTION OF POLLUTANT OBJECTS AND METHOD THEREOF The present disclosure relates to the field of detection and collection of pollutant objects. The envisaged system (100) and method eliminates the need of human intervention for collection of pollutant objects, and is also effective and efficient. The system (100) comprises an unmanned aerial vehicle (UAV) (102), a server (120), and a collecting unit (130). The UAV (102) is configured to periodically capture the images of vicinity while maneuvering and determine location and presence of pollutant objects. The server (120) is configured to cooperate with the UAV (102) to generate a navigable path for the collecting unit (130) based on the location of the pollutant objects. Further, the collecting unit (130) is configured to navigate along the navigable path to collect the pollutant objects from the locations determined by the UAV (102).

No. of Pages : 28 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27106

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821010429 A (19) INDIA (22) Date of filing of Application :21/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : A DIGITAL ASSISTANT FOR PERSONAL DIGITAL COMMUNICATION AND METHOD THEREOF

:G06F0017270000, (71)Name of Applicant : H04M0003436000, 1)ZENSAR TECHNOLOGIES LIMITED (51) International classification H04W0004800000, Address of Applicant :ZENSAR KNOWLEDGE PARK, H04W0072120000, PLOT # 4, MIDC, KHARADI, OFF NAGAR ROAD, PUNE- H04L0027380000 411014, MAHARASHTRA, INDIA Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)KUMAR Anand Yashwanth (33) Name of priority country :NA 2)NAMBIAR Ullas Balan

(57) Abstract : ABSTRACT A DIGITAL ASSISTANT FOR DIGITAL COMMUNICATION A METHOD THEREOF The present disclosure relates to field of digital assistant (100) for digital communication. The envisaged digital assistant (100) prioritizes digital communications based on its contents. The digital assistant (100) includes an activity detection unit (106), an analyzing unit (108), a prioritizer (116), and a summarizer (124). The activity detection unit (106) is configured to track the digital communication activity of a user, and generate an incoming activity signal. The analyzing unit (108) is triggered by the incoming activity signal to analyze the contents of the incoming digital communication. The prioritizer (116) is configured to determine the priority level of the incoming digital communication based on the first analyzed data. The summarizer (124) is configured to paraphrase the contents of the incoming digital communication based on the received incoming analyzed data.

No. of Pages : 27 No. of Claims : 13 The Patent Office Journal No. 29/2020 Dated 17/07/2020 27107

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821010444 A (19) INDIA (22) Date of filing of Application :21/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : WEARABLE COMMUNICATION DEVICE

:H04R0001100000, (71)Name of Applicant : A44C0009000000, 1)Lazy Design Private Limited (51) International classification H04R0001020000, Address of Applicant :M-901, Laburnum Park, Magarpatta H04R0001280000, City, Hadapsar, Pune-411013, Maharashtra, India. Maharashtra G10K0011020000 India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)SHANKAR, Apoorv

(57) Abstract : Disclosed is a ring shaped wearable communication device (ring) for a user™s finger. The ring includes: a sound sensor that detects ambient sound levels; a speaker that produces sound in human audible frequency range per at least one signal received, wherein intensity of the sound produced is based on the ambient sound level; an out port; and a hollow channel with an increasing cross- section that wraps around the finger, wherein: smaller cross-section end of the hollow channel is connected to the speaker and the other end of the hollow channel is connected to the out port to provide a horn-like structure; the out port and the hollow channel are configured to reduce the mismatch between the acoustic impedance of air immediately outside the out port and the acoustic impedance as seen by the speaker just outside the speaker; and the out port emits sound received from the speaker as directional sound in close vicinity of the user™s hand.

No. of Pages : 62 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27108

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821010738 A (19) INDIA (22) Date of filing of Application :23/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : HEIGHT ADJUSTABLE SHOCK ABSORBER

:B60G0017080000, (71)Name of Applicant : B60G0017016000, 1)Gabriel India Limited (51) International classification B60G0017020000, Address of Applicant :29th, Milestone, Pune Nasik Highway, B60N0002160000, Village: Kuruli, Tal: Khed, Dist: Pune - 410 501 (MH), India A61G0013080000 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Divakar Bhat (33) Name of priority country :NA 2)Saravanan D

(57) Abstract : HEIGHT ADJUSTABLE SHOCK ABSORBER Abstract Disclosed is a height adjustable shock absorber (100).The height adjustable shock absorber (100) includes a height adjustment assembly (10) that helps to increase the seat height and clearance between wheel and mudguard without changing the spring pre-load and stroke.The values entered in a scale of anextension rod(15) helps to adjust the height of a twin shock absorber motorcycle evenly to both left and right hand side. For mono shock absorber motorcycle, the extension rod(15) helps in height adjustment by each millimeter. Figure 2

No. of Pages : 10 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27109

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821012124 A (19) INDIA (22) Date of filing of Application :30/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : A DIE FOR PERFORMING BLANKING AND FORMING OPERATIONS IN PARALLEL

:B21D0037200000, (71)Name of Applicant : B21D0028060000, 1)MAHINDRA AND MAHINDRA LIMITED (51) International classification B32B0027120000, Address of Applicant :Mahindra Towers, G.M. Bhosale Marg, B21D0053280000, Worli, Mumbai, Maharashtra, 400 018 India Maharashtra India B21D0031000000 (72)Name of Inventor : (31) Priority Document No :NA 1)UDAIPURWALA Aftab Aziz (32) Priority Date :NA 2)SAWANT Sachin Sitaram

(57) Abstract : ABSTRACT A DIE FOR PERFORMING BLANKING AND FORMING OPERATIONS IN PARALLEL The present disclosure relates to dies for sheet metal processing, and envisages a die for performing blanking and forming operations in parallel. The die comprises a bottom shoe (100) and a top shoe (200). The bottom shoe (100) is provided with a cutting element (108), a cavity block (112) and an adjustable geometrical stopper (114). The cavity block (112) is in a shape complementary to the shape of the component. The geometrical stopper (114) is configured adjoining the cavity block (112) and can be set in different operative positions. The top shoe (100) comprises a protrusion block (212) which is complementary to the cavity block (112). Either of the shoes (100) and (200) is attached to the press™s ram. The die performs in parallel blanking using the cutting element (108) and forming between the cavity block-protrusion block pair (112-212). The die also reduces lead time and cost for manufacture.

No. of Pages : 18 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27110

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821012246 A (19) INDIA (22) Date of filing of Application :31/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SYSTEM AND A METHOD FOR REDUCING THERMAL LOAD IN A CLUTCH

:F16D0048060000, (71)Name of Applicant : E02F0009200000, 1)Tata Motors Limited (51) International classification F24F0011460000, Address of Applicant :Bombay House, 24 Homi Mody Street, B60W0010184000, Hutatma Chowk, Mumbai - 400001, Maharashtra, India B60W0030186000 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)DAWKHAR, Bhagirath Rameshrao (33) Name of priority country :NA 2)BADADHE, Shailesh Pandharinath (86) International Application No :NA 3)CHASKAR, Mithun Ravindra

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A system and a method for reducing thermal load in a clutch comprises of a sensor, which senses the temperature of the clutch. The controlling unit is coupled with the sensor to receive sensed temperature from the clutch and compares with a predefined temperature. An air conditioner which is electrically coupled with the controlling unit includes a pipe to supply cooled air from the air conditioning unit to the clutch. The controlling unit instructs the air conditioner to supply cooled air to the clutch through the pipe to reduce thermal load in the clutch when sensed temperature is greater than said pre-defined temperature. Fig. 1 is the representative figure.

No. of Pages : 12 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27111

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821012251 A (19) INDIA (22) Date of filing of Application :31/03/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : A TRUNK LID AND FUEL LID RELEASING SYSTEM

:B60K0015050000, (71)Name of Applicant : E05B0063000000, 1)Tata Motors Limited (51) International classification E05F0001100000, Address of Applicant :Bombay House, 24 Homi Mody Street, B60J0007200000, Hutatma Chowk, Mumbai 400001, Maharashtra, India E05B0083260000 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)BOCHRE, Avinash Bhanudas (33) Name of priority country :NA 2)RAJWADE, Pranita

(57) Abstract : The problem to be solved is to provide a single knob mechanism to reduce the requirement of separate cables for trunk lid and fuel lid, and the problem is solved in the present invention by a fuel lid and trunk lid releasing mechanism which includes a first and a second flaps 2, 3 which are connected with trunk lid and the fuel lid respectively, each of these flaps 2, 3 includes a provision angled to each other to receive a lock nut 6, 7, which is connected to a knob 1 through a cable 12, such that when the knob 1 is lifted i.e. with or without rotation, either of the lock nut 6, 7 pushes one of the flaps 2,3 to enables opening of either fuel lid and the trunk lid.

No. of Pages : 14 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27112

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821015983 A (19) INDIA (22) Date of filing of Application :27/04/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR RENDERING STITCHED VIDEO MEDIA STREAM ON A DISPLAY DEVICE

:H04W0036220000, (71)Name of Applicant : G06F0017220000, 1)RELIANCE JIO INFOCOMM LIMITED (51) International classification G06F0017210000, Address of Applicant :3rd Floor, Maker Chamber-IV, 222, C07D0403120000, Nariman Point, Mumbai “ 400 021, Maharashtra, India C07D0413040000 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Narendera Kumar Natarajan (33) Name of priority country :NA 2)Shankar Jayaraman (86) International Application No :NA 3)Bharath Reddy Mallepalli

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT SYSTEM AND METHOD FOR RENDERING STITCHED VIDEO MEDIA STREAM ON A DISPLAY DEVICE• A system [100] and method [300] for rendering a stitched video media stream on a first display device [112A] is disclosed. More particularly, the embodiments may disclose a method for establishing a video session between a first user equipment [102A] and a second user equipment [102B] based on a video session request; receiving a first video media stream associated with the first user equipment [102A] and a second video media stream associated with the second user equipment [102B]; receiving a request to render the stitched video media stream on the first display device [112A]; stitching the first video media stream and the second video media stream to form the stitched video media stream; receiving a streaming request to stream the stitched video media stream; and transmitting the stitched video media stream to the first network device [110A] for rendering the stitched video media stream on the first display device [112A]. [FIG. 1]

No. of Pages : 35 No. of Claims : 23

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27113

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821018541 A (19) INDIA (22) Date of filing of Application :17/05/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR QUANTIFYING QUALITY OF CUSTOMER EXPERIENCE (CX) OF AN APPLICATION

:G06F0011340000, (71)Name of Applicant : G06F0016951000, 1)Tata Consultancy Services Limited (51) International classification G06Q0010000000, Address of Applicant :Nirmal Building, 9th Floor, Nariman H01L0027120000, Point, Mumbai - 400021, Maharashtra, India Maharashtra India G06Q0010040000 (72)Name of Inventor : (31) Priority Document No :NA 1)VENKADESAVARALU, Vimal Anand (32) Priority Date :NA 2)UMAYAL PURAM SRINIVASARAGHAVAN, (33) Name of priority country :NA Dhasuruthe

(57) Abstract : Quality of Customer Experience (CX) is dependent on various dimension of non-functional parameters and influenced by standards, usage patterns for a particular application such as a web application or a mobile application that can change real-time. Existing methods evaluating CX do not provide methodical approach to determine quality of the CX is terms of a quantified value or score. Embodiments herein provide a method and system for quantifying the CX quality for an application in terms of non-functional parameter such as browser compatibility (C), usability (U), application security (S), accessibility (A) and application performance (P). Further, the embodiments provide a cumulative CX rating that provides a cumulative effect of individual CX rating computed for all non-functional parameters.

No. of Pages : 82 No. of Claims : 12

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27114

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821021116 A (19) INDIA (22) Date of filing of Application :06/06/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : SMART ENVIRONMENT SYSTEM

:G06Q (71)Name of Applicant : (51) International classification 50/00 1)LATIGID ENGINEERING PVT. LTD. (31) Priority Document No :NA Address of Applicant :238, SHASTRI MARKET, M.G. (32) Priority Date :NA ROAD., INDORE-452001, MADHYA PRADESH, INDIA (33) Name of priority country :NA Madhya Pradesh India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)ASHWANI AGRAWAL

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Abstract SMART ENVIRONMENT SYSTEM A smart environment system comprising: at least one first end device configured with a first communication protocol; at least one second end device configured with a second communication protocol; an electronic device for controlling the at least one first end device and at least one second end device; and a control device, wherein the control device includes a memory, a processor coupled to the communication interface and the memory, wherein the memory stores instructions that, when executed by the processor, causes the control device to: acquire information, inputted by a user in the electronic device, about at least one first end device configured with a first communication protocol and at least one second end device configured with a second communication protocol, and configure, by a lookup protocol module, the at least one first end device configured with a first communication protocol and the at least one second end device configured with a second communication protocol to be controlled by the electronic device.

No. of Pages : 30 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27115

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821025608 A (19) INDIA (22) Date of filing of Application :09/07/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR CLUSTERING USERS USING COGNITIVE STRESS REPORT FOR CLASSIFYING STRESS LEVELS

:A61B0005000000, (71)Name of Applicant : A61B0005024000, 1)Tata Consultancy Services Limited (51) International classification A61B0005020500, Address of Applicant :Nirmal Building, 9th Floor, Nariman A61B0005160000, Point, Mumbai - 400021, Maharashtra, India Maharashtra India G06N0020000000 (72)Name of Inventor : (31) Priority Document No :NA 1)DAS, Deepan (32) Priority Date :NA 2)DATTA, Shreyasi (33) Name of priority country :NA 3)BHATTACHARJEE, Tanuka (86) International Application No :NA 4)DUTTA CHOUDHURY, Anirban Filing Date :NA 5)PAL, Arpan

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method and system for clustering users using cognitive stress report for classifying stress levels is provided. Detection and monitoring of cognitive stress experienced by users while performing a task is very crucial. The method includes receiving, user evaluated cognitive stress reports and the physiological signals of the user during the performance of the task. A normalized cognitive report is generated from the user evaluated cognitive stress report by computing mode and range value. The normalized cognitive stress reports of the users are used to cluster the users into a primary cluster and a secondary cluster. Feature sets are extracted from the physiological signals of the said users associated with the primary cluster. Using the said feature sets a classifier model is trained to classify the cognitive stress levels of the users as stressful class and /or stressless class.

No. of Pages : 39 No. of Claims : 14

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27116

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821028432 A (19) INDIA (22) Date of filing of Application :28/07/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : SELF-RELEASING RUBBER GRAFTING TAPE COMPOSITION AND METHOD OF PREPARATION THEREOF

:C08F0255020000, (71)Name of Applicant : C08L0051080000, 1)Garware Bestretch Limited (51) International classification C08L0051060000, Address of Applicant :Supreme Headquarter, 9th Floor, H05K0001030000, Survey No. 36, Pune Bangalore Highway, Baner, Pune “ 411 045, C08L0051000000 Maharashtra, India Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Mr. Sudhir Pitre (33) Name of priority country :NA 2)Mr. Makarand Deshpande (86) International Application No :NA 3)Mr. Sayi Sasidharan

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Self-Releasing Rubber Grafting Tape Composition and Method of Preparation Thereof Abstract Disclosed are a self-releasing rubber grafting tape composition and a method of preparation thereof. The composition of the present invention provides a cost effective self- releasing rubber grafting tape that is biodegradable under open atmosphere with the help of heat and ultraviolet radiation. The composition and the method of the present invention improve processing of the compound leading to better thickness uniformity across the width of the tape and a consistent performance that in turn helps in natural degradation of the tapes. The composition and the method of the present invention provide tapes of low modulus and stretchable nature of rubber that is designed to hold and protect the grafted or budded area of the plant intact until graft union happens. Figure 2

No. of Pages : 22 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27117

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821034066 A (19) INDIA (22) Date of filing of Application :10/09/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : AUTOMATIC RAIL TRACK CLEANER

:G06F0012020000, (71)Name of Applicant : B61L0015000000, 1)Joy Agrawal (51) International classification E01H0008100000, Address of Applicant :205, T6, Lake View Enclave, opp. E01B0003380000, Gurudwara, Atomic energy road, amravati road, nagpur E01B0026000000 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Joy Agrawal

(57) Abstract : The invention is an automatic rail track and surrounding cleaner to clean the rail tracks by an efficient method of sucking the garbage and unwanted material from the tracks of the Indian Railways Contributing to Swatch Bharat Abhiyan by cleaning the tracks and around it. The said invention will make use of the Bernoulli™s principle and will collect the garbage in a coach attached to the end of the train. This will facilitate the Swaach Bharat Abhiyan, keep rail tracks clean and increase life of the railway tracks.

No. of Pages : 3 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27118

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821035703 A (19) INDIA (22) Date of filing of Application :21/09/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR NON-APNEA SLEEP AROUSAL DETECTION

:A61B0005000000, (71)Name of Applicant : G06K0009620000, 1)Tata Consultancy Services Limited (51) International classification G06N0020000000, Address of Applicant :Nirmal Building, 9th Floor, Nariman G06N0007000000, Point, Mumbai - 400021, Maharashtra, India Maharashtra India A61M0021000000 (72)Name of Inventor : (31) Priority Document No :NA 1)BHATTACHARJEE, Tanuka (32) Priority Date :NA 2)DAS, Deepan (33) Name of priority country :NA 3)ALAM, Shahnawaz (86) International Application No :NA 4)BANERJEE, Rohan Filing Date :NA 5)DUTTA CHOUDHURY, Anirban (87) International Publication No : NA 6)PAL, Arpan (61) Patent of Addition to Application Number :NA 7)RAO MELAVARIGE VENKATAGIRI, Achuth Filing Date :NA 8)GHOSH, Prasanta Kumar (62) Divisional to Application Number :NA 9)LOHANI, Ayush Ranjan

Filing Date :NA

(57) Abstract : Monitoring the quality of sleep of an individual is essential for ensuring one"s overall well-being. The existing methods for non-apnea sleep arousal detection are manual. A system and method for the non-apnea sleep arousal detection has been provided. The method uses a feature engineering based binary classification approach for distinguishing non-apnea arousal and non-arousal. A training data set is prepared using a plurality of physiological signals. A plurality of features are derived from the training data set. Out of those only a set of features are selected for training a plurality of random forest classifier models. A test sample is then provided to the plurality of random forest classifier models in the instances of fixed duration. This results in generation of prediction probabilities for each instances. The prediction probabilities are then used to predict the probabilities of non-apnea sleep arousal in the test sample.

No. of Pages : 32 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27119

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821043748 A (19) INDIA (22) Date of filing of Application :20/11/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN IMPROVED ASYMMETRIC SYNTHESIS OF AZASPIRO COMPOUNDS

(71)Name of Applicant :

1)PIRAMAL ENTERPRISES LIMITED :C07C (51) International classification Address of Applicant :Piramal Ananta, Agastya Corporate 51/15 Park, Opposite Fire Brigade, Kamani Junction, LBS Marg, Kurla (31) Priority Document No :NA West, Mumbai Maharashtra India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)LELETI, Rajender Reddy (86) International Application No :NA 2)WAMAN, Yogesh Filing Date :NA 3)KALLURE, Priya (87) International Publication No : NA 4)BEGUM, Zubeda (61) Patent of Addition to Application Number :NA 5)DIVYA, Thumban Filing Date :NA 6)NALIVELA, Kumara Swamy (62) Divisional to Application Number :NA 7)VIJAY, Saurabh Filing Date :NA 8)PARIKH, Paranjay 9)KOTTURI, Sharadsrikar

(57) Abstract : ABSTRACT AN IMPROVED ASYMMETRIC SYNTHESIS OF AZASPIRO COMPOUNDS The present invention relates to an improved asymmetric synthesis of azaspiro or di-azaspiro compound (hereafter referred to as the compound 5, (5A) or (5N)) or their pharmaceutically acceptable salts and derivatives; through the formation of intermediate compounds 4, (4A) or (4N) respectively. The process comprises an unusual substrate specific highly diastereoselective as well as enantio-enriched 1-substituted 2- azaspiro[3.3]heptane or 1-substituted 2-diazaspiro[3.3]heptane compounds with high diastereoselectivity by addition of a cyclobutane carboxylate anion to a Davis-Ellman™s imine, followed by reduction and cyclisation resulting in the selective formation of azaspiro or diazaspiro intermediate compound 4, (4A) or (4N); which on subsequently removing the sulfinyl group provides corresponding azaspiro or diazaspiro compound 5, (5A) or (5N) respectively. To, The Controller of Patents The Patent Office At Mumbai

No. of Pages : 30 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27120

(12) PATENT APPLICATION PUBLICATION (21) Application No.201821046521 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A MINERAL BASED COMPOSITION FOR USE AS A BINDER IN THE MANUFACTURE OF CEMENT.

:C04B0018040000, (71)Name of Applicant : C04B0028260000, 1)UltraTech Cement Limited (51) International classification C09K0008467000, Address of Applicant :˜B™ wing, 2nd Floor, Ahura Centre, C04B0018020000, Mahakali Caves Road, Andheri (East), Mumbai - 400093, C22B0007040000 Maharashtra Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Jean Bosco Kazirukanyo (33) Name of priority country :NA 2)Dr. Suresh Krishnamoorthy (86) International Application No :NA 3)Manish Kumar Kuchya

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT A mineral based composition for use as a binder in the manufacture of cement [0051] The present invention relates to a mineral based composition for use as a binder in the manufacture of cement, the composition comprising industrial waste, china clay and mineralizer wherein the industrial waste is selected from the group comprising red mud, fly ash, aluminium dross fines, aluminium electrode waste, other solid wastes from aluminum industry, metallurgical slags like copper slag, lead-zinc slag and a combination thereof. Reference (Figure 1).

No. of Pages : 15 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27121

(12) PATENT APPLICATION PUBLICATION (21) Application No.201827030213 A (19) INDIA (22) Date of filing of Application :10/08/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : STATOR FOR AN AXIAL FLOW MACHINE WITH A STATOR RING COMPOSED OF MODULES

:H02K 1/14, H02K (71)Name of Applicant : (51) International classification 1/18 1)WHYLOT SAS (31) Priority Document No :FR 1600078 Address of Applicant :Zone d'Activits Quercyp´le 2 46100 (32) Priority Date :14/01/2016 Cambes France (33) Name of priority country :France (72)Name of Inventor : (86) International Application No :PCT/FR2017/000007 1)MIHAILA, Vasile Filing Date :06/01/2017 2)SAVIN, Serghei (87) International Publication No :WO 2017/121941 3)TIEGNA, Huguette (61) Patent of Addition to Application 4)PLOIX, Vincent :NA Number 5)RAVAUD, Romain :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a stator for an electromagnetic axial flow machine the stator forming a ring (1) having two substantially circular faces (1a 1b) connected via a thickness comprising windings (3) uniformly distributed in the ring (1). Each winding (3) is carried by a unitary portion (4) having a core (5) about which the winding (3) is wound. The unitary portions (4) are arranged concentrically edge to edge and have means (12 12a 14) for rigidly connecting same with a support member (6) optionally forming part of a housing accommodating the ring (1) which means are carried either by axial and lateral faces of each edge-to-edge unitary portion (4) or by at least one top or bottom face of each unitary portion forming part of a substantially circular face.

No. of Pages : 14 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27122

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921000940 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : MICROCONTROLLER BASED SOLAR INSECTS HV TRAP IS A DEVICE

:A01M (71)Name of Applicant : (51) International classification 1/02 1)DIGAMBER D KORE (31) Priority Document No :NA Address of Applicant :PLOT NO. 41, SERVENO 104, MIDC, (32) Priority Date :NA SHAH-LULLA, MAHANAGAR , SAVALI-416410, DIST. (33) Name of priority country :NA SANGLI, MAHARASHTRA, INDIA. Maharashtra India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)DIGAMBER D KORE

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Solar Insects HV trap is a device developed for Integrated Pest Management in organic Agriculture and Horticulture farms. This device uses latest microcontroller technology for lighting Ultra Violet lamp and generate a high voltage to kill flying insects. An electric trap is one such device with a high voltage electrocuting circuit and an insect attracting UV lamp, so as to kill these flying insects. This is a range of wavelength to attract flying adult and nymph"s of economics important in agriculture. If we use this device in agriculture filed it reduces the usage of poisonous chemical pesticide. This device operates with fully auto functioning based on microcontroller technology, self-powered, turning ON light during dusk time (6:00 - 7:00 PM) and turns OFF after continuous operation of 5 hours. Also providing protection against Rain falls, Battery deep discharge, full charge protection. This feature enables to kills flying Insects that damages the crop majorly. It avoids capturing beneficial insects of the farm.

No. of Pages : 7 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27123

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921000974 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN INTERACTIVE UTENSIL AND A METHOD THEREOF

:H04N0007180000, (71)Name of Applicant : F16J0015060000, 1)Ganesh Harishchandra Birale (51) International classification A47G0021020000, Address of Applicant :A-409, Thought2things, Megacentre A47G0019020000, Behind Noble Hospital, Hadapsar Pune Maharashtra India B01D0035143000 Maharashtra India (31) Priority Document No :NA 2)Mahesh Satishchandra Deshmukh (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)Ganesh Harishchandra Birale (86) International Application No :NA 2)Mahesh Satishchandra Deshmukh

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An interactive utensil is disclosed. The interactive utensil includes at least two surfaces. The at least two surfaces includes a first surface wherein the first surface includes a plurality of grooves configured to collect excessive viscous fluid from one or more food components served on the first surface of the at least two surfaces; a second surface configured to provide support to the utensil. The second surface includes a planar shape wherein the first surface and the second surface are joined together; a sensing layer which includes a sensing unit placed between the first surface and the second surface. The sensing unit is configured to sense one or more parameters of the one or more food components, a communicating unit configured to send an alert to a user corresponding to one or more food components through a communication medium. FIG. 1

No. of Pages : 18 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27124

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001020 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS FOR PREPARATION OF APREMILAST CRYSTALLINE FORM A AND INTERMEDIATE THEREOF

:C07D0209480000, (71)Name of Applicant : C07C0315040000, 1)Intas Pharmaceuticals Ltd. (51) International classification C07C0317280000, Address of Applicant :Intas Pharmaceuticals Ltd. Corporate C07C0315060000, House, Near Sola Bridge, S. G. Highway, Thaltej, Ahmedabad - C07J0007000000 380054, Gujarat, India. Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Rama Shankar (33) Name of priority country :NA 2)Nilesh Manjibhai Jamriya (86) International Application No :NA 3)Ram Dayabhai Gosiya Filing Date :NA 4)Brijesh Dinkarrai Desai

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : PROCESS FOR PREPARATION OF APREMILAST CRYSTALLINE FORM A AND INTERMEDIATE THEREOF• ABSTRACT The present invention relates to an improved process for preparation of crystalline Form A of apremilast (I) and intermediate of formula (IV). (I) (IV)

No. of Pages : 14 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27125

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001039 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A PROCESS FOR PREPARATION OF BETAHISTINE

:A61K0031440200, (71)Name of Applicant : B82Y0020000000, 1)AMI LIFESCIENCES PVT. LTD. (51) International classification C07C0067297000, Address of Applicant :2nd Floor, Prestige Plaza, 40, Urmi A61K0039000000, Society, Urmi Char Rasta, Productivity Road, Baroda-390 020, G01N0033543000 Gujarat, India Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)PATEL, Kalpesh, Ravajibhai (33) Name of priority country :NA 2)THAKRAR, Virendra, Haridasbhai (86) International Application No :NA 3)PRAJAPATI, Nitin Vasantbhai Filing Date :NA 4)SUTARIYA, Nirav Bavanjibhai (87) International Publication No : NA 5)SHAH, Kinchit, Jitendrakumar (61) Patent of Addition to Application 6)PATEL, Vaishalee Vikas :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention discloses an efficient industrial process for preparation of highly pure Betahistine with good yields.

No. of Pages : 16 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27126

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001084 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A 3 DIMENSIONAL ELECTRONIC PROJECT CONSTRUCTION SYSTEM WITH MODULAR CIRCUIT BUILDING POLYGON SHAPED ELEMENTS WITH HOLES IN DEFINED GRID.

:G09B0023180000, (71)Name of Applicant : G06F0017500000, 1)EDUPRIME TECHNOLOGIES PRIVATE LIMITED (51) International classification A63H0033100000, Address of Applicant :210 SWASTIK DISHA CORPORATE H01Q0023000000, PARK, LBS MARG, GHATKOPAR (WEST), MUMBAI - H05K0007020000 400086 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)MR.ABHISHEK SHAH (33) Name of priority country :NA 2)MR. ARPAN SHAH

(57) Abstract : ABSTRACT: This invention is an electronic circuit and project making system in 2 & 3 dimensions, with educational facility to learn electronics and various concepts of circuits without requiring any prior expertise for the same. A polygon or circular shaped electronic circuit element consisting of a grid of holes and an electronic component, assembled in 3 layers composite modular block. The block or element contains an equivalent polygon or circular shaped PCB (Figs 1-11) and a casing consisting of a pair of similar geometrically shaped covers on the PCB™s top & bottom surfaces. The element also contains equally distributed connection points or nodes, mostly equivalent to the sides of the geometric shape and depending on the number of connecting pins of the respective electronic component in the block. Each node consists of two types of connectors or points of connection, one a vertical connector with vertical projection and other a horizontal connector with horizontal projection; each consisting of 3 pins. These blocks are connected with each other externally, according to given electronic circuit diagram, using simple female-to-female housing wires to form a complete circuit. The modular blocks can be reused, reconnected and rearranged to build various electronic circuits, whereas the grid-hole arrangement provides mechanical fitting options with similar grid-hole arrangement parts so as to develop various structures in 3 dimensions as well as 2 dimensions. The electrical connection methodology remains same for constructed projects. The projects can also use additional materials which can enhance the outlook of the project, thus helping the user to create working prototypes of products. This boosts innovation and creative thinking in addition to learning the concepts related to electronic circuits.

No. of Pages : 31 No. of Claims : 25

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27127

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001089 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR GENERATING SOCIAL INTERACTION PLATFORM FOR DIGITAL ENTITIES WITHIN EXTENDED REALITY ENVIRONMENTS

:G06T0019000000, (71)Name of Applicant : G02B0027010000, 1)DIMENSION NXG PRIVATE LIMITED (51) International classification G09B0007020000, Address of Applicant :501, Arcadia, Hiranandani Estate, G09B0019000000, Patlipada, Ghodbunder Road, Thane, Maharashtra -400607, India H04L0029060000 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Pankaj Raut (33) Name of priority country :NA 2)Abhijit Patil (86) International Application No :NA 3)Abhishek Tomar Filing Date :NA 4)Suraj Kumar Choudhary

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT SYSTEM AND METHOD FOR GENERATING SOCIAL INTERACTION PLATFORM FOR DIGITAL ENTITIES WITHIN EXTENDED REALITY ENVIRONMENTS A method (200) for enabling an HMD based social interaction between users and AI bots, comprises registering (210) one or more users associated with respective one or more HMDs (1021¦102n), receiving, storing and displaying (220) AI content including one or more AI bots trained in a plurality of specific skills, receiving (230) a request regarding provision of training and/or information related to one or more specific skills, providing (240) a list of one or more AI bots trained in the required one or more specific skills, receiving (250) a selection of an AI bot from the respective HMD, providing (260) an interactive session with the selected AI bot on the respective HMD in an extended reality space, receiving (270) a feedback based on an experience of the interactive session and improving (280) the proficiency of the AI bot in the one or more specific skills based on the feedback. [FIGURE 2]

No. of Pages : 38 No. of Claims : 27

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27128

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001094 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN ELECTRICAL CONNECTOR ASSEMBLY

:H01R0013622000, (71)Name of Applicant : H01R0013520000, 1)APPLETON GRP LLC (51) International classification H01R0013740000, Address of Applicant :9377, Higgins Road, Rosemount, IL, H01R0024380000, 60018, U.S.A U.S.A. H01R0013625000 (72)Name of Inventor : (31) Priority Document No :NA 1)Christopher Richard Ruhland (32) Priority Date :NA 2)SACHAN Abhinav Singh

(57) Abstract : The present disclosure envisages an electrical connector assembly (100) for heavy duty applications. The assembly (100) comprises a plug (10), a receptacle (20), a gasket (50), a first collar (30) and a second collar (40). The collar (30) has external threads and is rotatably mounted on the plug (10). The collar (40) has internal threads complementary to the external threads of the collar (30) and is rotatably mounted on one of the plug (10) and the receptacle (20). The arrangement of collars is configured such that rotation of the collar (40) causes axial displacement of the collar (40) and thereby that of the plug (10) against the gasket (50) for forming a watertight seal between the plug (10) and the receptacle (20). The connector assembly (100) of the present disclosure provides enhanced ingress protection.

No. of Pages : 22 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27129

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001101 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR SARCASM DETECTION ON DEVANAGARI SENTENCES

:G06F0017270000, (71)Name of Applicant : G06N0020000000, 1)MKSSS™s Cummins College of Engineering for Women (51) International classification G06F0016350000, Address of Applicant :Survey No. 11/2, Karvenagar, Pune- G06N0003040000, 411052, Maharashtra, India Maharashtra India G06F0017210000 (72)Name of Inventor : (31) Priority Document No :NA 1)Pradnya Kandarkar (32) Priority Date :NA 2)Radhika Joshi (33) Name of priority country :NA 3)Rafiya Bano Sheikh (86) International Application No :NA 4)Riya Tirole Filing Date :NA 5)Pranjali Deshpande

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention proposes a classification system (100) that performs sarcasm detection on sentences presented in Hindi (Devanagari) natural language text comprising an input unit, an output unit and a memory unit all connected to a processing unit. The memory unit is configured with a machine-learning classifier using a vector-based language model and a dataset of text having labeled as sarcastic and non sarcastic. The system (100) incorporates use of word embeddings, sentiment, emoticons and topic modeling to learn the features of the input data/sentence to be classified, determine the presence of contrast of emotion sentiment and use the result to finally determine whether the sentence is sarcastic or not. Figure 1

No. of Pages : 15 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27130

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001116 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A PRE-CAST STRUCTURE AND A METHOD THEREOF

:E04H0004140000, (71)Name of Applicant : E02D0027020000, 1)Sagar Ramesh Hande (51) International classification E04D0003400000, Address of Applicant :Shreenath Savali, Handewadi E04C0002000000, Handewadi Road Pune Maharashtra India Maharashtra India G08B0013196000 (72)Name of Inventor : (31) Priority Document No :NA 1)Sagar Ramesh Hande

(57) Abstract : A pre-cast structure for constructing of an interlocked brick wall is provided. The pre-cast structure includes a pre-cast beam and a pre-cast coping. The pre-cast beam is configured to provide a base for foundation layer for installing a plurality of interlocking bricks. The pre-cast coping is configured to provide a coping for an interlocked brick wall, wherein the interlocked brick wall is made by the plurality of interlocking bricks interlocked together. The present disclosure requires less manpower and consumes less time. FIG. 1

No. of Pages : 12 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27131

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001119 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A PROCESS FOR THE TREATMENT OF SEWAGE

:C02F0001440000, (71)Name of Applicant : C02F0011120000, 1)Harshvardhan Madhusudan Modak (51) International classification C12M0001000000, Address of Applicant :Ashutosh, 18, Vivek Society, C12M0001107000, Padmavati, Pune 411009 Maharashtra India C02F0003280000 (72)Name of Inventor : (31) Priority Document No :NA 1)Harshvardhan Madhusudan Modak

(57) Abstract : The present invention discloses a process for treatment of sewage employing membrane technology, which brings about recovery of reuse quality water to almost about 90% of original volume with least energy consumption as compared to that needed for traditional STP using aeration. It does not generate any sludge & occupies considerably less space per m3 of sewage. It can be easily installed in existing sewage treatment plants to accommodate incremental quantity of sewage. It gives an additional benefit of leaving behind a concentrated reject, which can be subjected to anaerobic digestion to recover biogas. The plate and frame configuration and the reverse osmosis technique is found to be giving the most preferred process characteristics. Thus applications of membrane technology helps to make available a significant quantity of clear colorless water suitable for reuse & concentrated sewage for recovery of biogas & electricity.

No. of Pages : 20 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27132

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001147 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : "WIRELESS MOBILE PHONE POWER CASE APPARATUS AND METHOD THEREOF"

:B60L (71)Name of Applicant : (51) International classification 53/126 1)THORAT ASHISH ASHOK (31) Priority Document No :NA Address of Applicant :301/B, VEDANT PARK, OPPOSITE (32) Priority Date :NA SAI VIHAR COMPLEX, NEAR VITTHAL MANDIR, (33) Name of priority country :NA KHARIGAON, KALWA, THANE(WEST)-400605, (86) International Application No :NA MAHARASHTRA, INDIA Maharashtra India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)THORAT ASHISH ASHOK

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to wireless mobile phone case apparatus and method for charging an electronic devices. More specifically, the present invention provides wireless mobile phone case apparatus comprising wireless battery, connector, camera lens cutout, Bluetooth, light emitting diode power meter, impact resistant material. The present invention also provides simple, efficient, reliable and low cost method of wireless mobile phone case for charging an electronic device.

No. of Pages : 16 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27133

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001180 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : CEMENT COMPOSITION AND A PROCESS FOR MANUFACTURING REINFORCED CEMENT STRUCTURE USING THE CEMENT COMPOSITION

:C04B0028020000, (71)Name of Applicant : C04B0028040000, 1)RELIANCE INDUSTRIES LIMITED (51) International classification C04B0028180000, Address of Applicant :3RD FLOOR, MAKER CHAMBER- C04B0040000000, IV, 222, NARIMAN POINT, MUMBAI-400021, B32B0005160000 MAHARASHTRA, INDIA Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)MEDHI, Mridul (33) Name of priority country :NA 2)GAJELLI, Chandramouli Gangaram (86) International Application No :NA 3)BHANGALE, Vikas Kadu Filing Date :NA 4)KADAM, Sandesh Chandrakant

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to cement composition comprising 20 to 70% cement, 20 to 60% silica, 10 to 30% flyash, 4 to 9% pulp, 0.2 to 0.4% fiber and 0.58 to 0.65% of a blend, of the total mass of the cement composition. The blend comprises an inorganic filler and at least one compound selected from the group consisting of an alkylene oxide, a surfactant and grinding aid. The cement composition of the present disclosure is compressed in a mold and then cured in an autoclave at a pressure in the range of 10 to 12 bar and at a temperature in the range of 170 to 180 °C to obtain the reinforced cement structure. The reinforced cement structure is characterized by having flexural strength in the range of 110 to 180 kg/cm2 and water absorption capacity in the range of 20 to 30%.

No. of Pages : 26 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27134

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001196 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : ABIRATERONE ACETATE SALTS, CO-CRYSTALS, AND SALT CO-CRYSTAL

:A61K0031580000, (71)Name of Applicant : A61K0009140000, 1)CIPLA LIMITED (51) International classification A61M0011040000, Address of Applicant :Cipla House, Peninsula Business Park, A61K0031573000, Ganpatrao Kadam Marg, Lower Parel, Mumbai “ 400013, C07J0043000000 Maharashtra, India. Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)PULLELA, Venkata Srinivas (33) Name of priority country :NA 2)PATHI, Srinivas Laxminarayan (86) International Application No :NA 3)CHENNURU, Ramanaiah Filing Date :NA 4)MUDGAL, Shrikant Suresh

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention provides certain salts, co-crystals and salt co-crystals of Abiraterone acetate with acidic substances such as succinic acid, glutaric acid, 4-hydroxy benzoic acid, 3,5-dihydroxy benzoic acid and 2,5-dihydroxybenzoiac acid. The invention further provides methods of preparation and characterization of such salts, co-crystals and salt co-crystals of Abiraterone acetate and pharmaceutical compositions containing them.

No. of Pages : 41 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27135

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001220 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR BREAKING WINDOWPANES OF EMERGENCY EXIT WINDOWS OF CLOSED ENTITY

:B41J0002160000, (71)Name of Applicant : F02D0041220000, 1)KULKARNI, Sanjay Ashok (51) International classification H01L0041273000, Address of Applicant :Flat D-9 Building 204, Sunder Sahawas H05H0001240000, Phase 2, Anand Nagar, Wadgaon Budruk, Sinhagad Road, Pune G02B0003140000 411051, Maharashtra, India. Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)KULKARNI, Sanjay Ashok

(57) Abstract : The present disclosure provides a system and method for breaking windowpanes of emergency exit windows of closed entity. The system includes: one or more piezoelectric actuators positioned between two windowpanes, and provided along perimeter of a window frame that surrounds two windowpanes, wherein each of the piezoelectric actuators includes a first surface that couples to a first windowpane of the two windowpanes and a second surface that couples to a second windowpane of the two windowpanes; and a power source operatively coupled to the piezoelectric actuators and adapted to generate a first signal upon actuation of the power source, wherein the piezoelectric actuators are actuated, upon generation of the first signal, to generate blocking force or stress to break the first windowpane and the second windowpane of the emergency exit window.

No. of Pages : 37 No. of Claims : 10 The Patent Office Journal No. 29/2020 Dated 17/07/2020 27136

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001224 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN IN-SITU ELECTROCHEMICAL SENSOR

:G01N0027404000, (71)Name of Applicant : G01N0027403000, 1)Indian Institute of Technology Bombay (51) International classification B23H0009100000, Address of Applicant :Powai, Mumbai 400076, Maharashtra G01N0027300000, India Maharashtra India G01N0017020000 (72)Name of Inventor : (31) Priority Document No :NA 1)Rajul Patkar (32) Priority Date :NA 2)Mukul Singh (33) Name of priority country :NA 3)Madhuri Vinchurkar (86) International Application No :NA 4)Maryam Shojaei Baghini

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Embodiments provide an electrochemical sensor. The disposable electrochemical sensor comprises of a 3-Dimensional (3D) Working Electrode (WE), a 3D Counter Electrode (CE), a 3D Reference Electrode (RE) and an electrical contact made of a preselected material. Each of the WE, the CE and the RE, comprises a preselected shape 3D structure constructed with a predefined material. Each of the WE, the CE and RE is coated with a preselected ink. FIG. 1

No. of Pages : 14 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27137

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001226 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A LAMINATE FOR RESEALABLE FLEXIBLE PACKAGING

:B29C0065180000, (71)Name of Applicant : B65D0065140000, 1)Positive Packaging United (ME) FZCO (51) International classification B32B0007060000, Address of Applicant :Positive Packaging United (ME) FZCO B65D0033250000, MO132 & MO133, Jebel Ali Free Zone, P.O. Box 17032, Jebel B29C0065480000 Ali, Dubai, United Arab Emirates U.A.E. (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Nitin Sankhe (33) Name of priority country :NA 2)Nrusingh Sahu

(57) Abstract : ABSTRACT A Laminate for Resealable Flexible Packaging The present invention relates to a laminate comprising a first area along the centre of the laminate for accommodating a product; a second area surrounding the first area, the second area being a re-sealable area; and a third area provided on each side of the second area, the third area having plurality of non-sealable regions and plurality of re-sealable regions in an alternating configuration, the laminate capable of being wrapped around the product whereby the second area seals with the second area forming a continuous sealed area, and the third area seals with the third area along the re-sealable regions forming an intermittently sealed area.

No. of Pages : 12 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27138

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001227 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A PANEL FOR A FLEXIBLE PACKAGE

:B65D0075580000, (71)Name of Applicant : B65D0033020000, 1)Positive Packaging United (ME) FZCO (51) International classification B65D0075520000, Address of Applicant :Positive Packaging United (ME) FZCO B65D0033000000, MO132 & MO133, Jebel Ali Free Zone, P.O. Box 17032, Jebel B65D0073000000 Ali, Dubai, United Arab Emirates U.A.E. (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Nrusingh Sahu (33) Name of priority country :NA 2)Rajan Thomas (86) International Application No :NA 3)Nitin Sankhe

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT A panel for a flexible package A panel for a flexible package, and a method and system for forming the panel is provided. The panel comprises a first laminate having an open-area; a second laminate extending from a top edge to a bottom edge; and a third laminate, the third laminate sealed with the first laminate to cover the open-area, and the top edge and the bottom edge of the second laminate sealed between the first laminate and the third laminate such that area between the top edge and the bottom edge of the second laminate remains free forming a loop with the panel. The panel preferably forms a side-gusset of a flexible packaging pouch, wherein the loop can be used as a handle to carry the flexible package. Reference Figure 1

No. of Pages : 22 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27139

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001228 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR MANAGING EVENTS USING AUTOMATED RULE GENERATION

:G06Q0040000000, (71)Name of Applicant : G06N0005020000, 1)Tata Consultancy Services Limited (51) International classification G06Q0010080000, Address of Applicant :Nirmal Building, 9th floor, Nariman G07F0009020000, point, Mumbai Maharashtra India G06F0016350000 (72)Name of Inventor : (31) Priority Document No :NA 1)CHATTERJEE, Swarup (32) Priority Date :NA 2)BAKSI, Sharmila (33) Name of priority country :NA 3)TEWARI, Tanmaya (86) International Application No :NA 4)DEY, Deb Shankar

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : In the monitoring domain, event management can deal with the monitoring of behavioural changes for any type of entity. Normally, the event management requires a lot of human intervention to generate a set of rules which results in adding effort and cost. A method and system for managing a plurality of events using automated rule generation has been provided. The system automatically generates a set of rules by studying the trend of incoming events over a period of time by computing moving percentile, thereby removing the need of human intervention to define rules for alert generation. The reported alerts are more specific and accurate, since the trend of incoming data is used to define the rules for alert generation. Further the method also provides the provision for the resolving the generated alerts either manually or automatically. To be published with FIG.1

No. of Pages : 22 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27140

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001271 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : MULTI-SEGMENTED TOOTHED SHAFT

:B29D0030260000, (71)Name of Applicant : A61B0034300000, 1)CEAT LIMITED (51) International classification B29D0030240000, Address of Applicant :RPG HOUSE, 463, Dr. Annie Besant F04D0029100000, Road, Worli, Mumbai- Maharashtra 400 030, India Maharashtra A61B0090700000 India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)SHEKAR, K Vijaya (33) Name of priority country :NA 2)PATEL, Ankitkumar Gunvantbhai

(57) Abstract : MULTI-SEGMENTED TOOTHED SHAFT A shaft assembly (100) for a tire building machine is disclosed. The shaft assembly (100) comprises an inner shaft (104) having a first end and a second end, and a plurality of toothed pulley segments (102) that are mounted on the inner shaft (104). The shaft assembly (100) further comprises a plurality of actuation members (202) that are positioned between the plurality of toothed pulley segments (102) and the inner shaft (104), wherein the plurality of actuation members (202) is to enable a rotation of the plurality of toothed pulley segments (102) on the inner shaft (104). The shaft assembly also comprises a first locking bush (106-1) and a second locking bush (106-2) provided at the first end and at the second end of the inner shaft, respectively, to prevent an axial movement of the plurality of toothed pulley segments (102) along the inner shaft (104). <>

No. of Pages : 12 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27141

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001313 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : ADJUSTABLE CLUBFOOT CORRECTIVE SPLINT

:A61F0005010000, (71)Name of Applicant : A61F0005058000, 1)MIT School of Bioengineering Sciences & Research (51) International classification A61B0017640000, Address of Applicant :MIT School of Bioengineering Sciences A61B0017660000, & Research MIT- ADT University, LoniKalbhor, Pune 412201, A61F0005080000 Maharashtra, India Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Renu Vyas (33) Name of priority country :NA 2)Salman Shaikh (86) International Application No :NA 3)Shalini Balgude Filing Date :NA 4)Nikhil Shelke

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ADJUSTABLE CLUBFOOT CORRECTIVE SPLINT Disclosed is an adjustable clubfoot corrective splint (100) that comprises a base (10), a lower connector (20), an upper connector (40) and a calf support (50). The adjustable clubfoot corrective splint (100) extends only till the calf and is lighter and easy to use. The adjustable clubfoot corrective splint (100) allows correction of adduction without using bar hence facilitates the free relative movement in both the feet. The adjustable clubfoot corrective splint (100) provides easier manipulations for the clinician during the treatment period and is less painful for the patient. The adjustable clubfoot corrective splint (100) is adjustable in a three way therefore useful for patients affected by unilateral as well as bilateral clubfoot. Figure 1a

No. of Pages : 22 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27142

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001314 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : MULTI CONTROL ELECTRIC WHEELCHAIR

:A61G0005040000, (71)Name of Applicant : A61G0005100000, 1)MIT School of Bioengineering Sciences & Research (51) International classification A61G0005120000, Address of Applicant :MIT School of Bioengineering Sciences G05G0009047000, & Research MIT- ADT University, LoniKalbhor, Pune 412201, A61G0005060000 Maharashtra, India Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Renu Vyas (33) Name of priority country :NA 2)Salman Shaikh (86) International Application No :NA 3)Hrutuja Nibe Filing Date :NA 4)Garud Hrishikesh Kailas

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Multi Control Electric Wheelchair Disclosed is a multi control electric wheelchair (100) that comprises a seat (4), a backrest (8), a pair of footrests (12, 16), a voice module (20), a microcontroller, an arm control system, a first joystick (24), a second joystick (28), a control circuit (32), a power source, a safety lock, a base and a pair of ultrasonic obstacle detection units. The multi control electric wheelchair (100) is controlled using three control mechanisms such any one of the first joystick (24) and the second joystick (28), the voice module (20) and a pair of force sensors (36, 37) to manoeuvre the wheelchair (100). The multi control electric wheelchair (100) is useful for patients suffering from physical disabilities. Figure 1

No. of Pages : 17 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27143

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001334 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : "ABSORBENT COMPOSITION FOR REMOVAL OF NOXIOUS GASES"

:H01M0010440000, (71)Name of Applicant : G11B0017049000, 1)ANJALI SUDHIR PURANIK (51) International classification G03G0015080000, Address of Applicant :1805, BURMALI ROAD, PALI- A24D0003060000, SUDHAGAD, MAHARASHTRA,INDIA, PIN CODE: 410205 B65D0006220000 Maharashtra India (31) Priority Document No :NA 2)SALIL SUDHIR PURANIK (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)ANJALI SUDHIR PURANIK (86) International Application No :NA 2)SALIL SUDHIR PURANIK

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention provides a green, eco-friendly and affordable adsorbent composition for removal of noxious gases CO2, SOx and NOx from industrial emissive gases, and a method thereof. The adsorbent composition comprises a powdered mixture of slaked lime, a first additive, a second additive and precipitated calcium hydroxide. Upto 100% removal of noxious gases is achieved by passing the particulate free industrial flue gases through multiple beds of adsorbent composition in an absorber (100).

No. of Pages : 22 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27144

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001385 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SMALL GRAIN CROP THRESHING MACHINE

:A01F0007040000, (71)Name of Applicant : A01F0012240000, 1)Vikas Dattaram Joyashi (51) International classification A01F0007020000, Address of Applicant :Faujdar wadi, At & Po Kondar Kalsur A01F0012560000, Tal. Guhagar, District Ratnagiri - 415724, Maharashtra, India B25J0017020000 Maharashtra India (31) Priority Document No :NA 2)Sachin Krishna Gujar (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)Vikas Dattaram Joyashi (86) International Application No :NA 2)Sachin Krishna Gujar

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : SMALL GRAIN CROP THRESHING MACHINE• Abstract Disclosed is a small grain crop threshing machine (100) for detaching the grain “ especially Ragi, from earheads. The machine (100) is compact in design, portable, easy to operate and affordable than already existing machines, and it can be operated either manually or electrically. The machine (100) mainly consists of a threshing drum (80) and a rotating shaft assembly. A frame (25) is horizontally fixed inside the threshing drum (20) with parallel rods mounted equidistantly there within. A rotating shaft (80) with drive wheel (70) is arranged horizontally inside the threshing drum (20) at the centre thereof and below the frame. A multiple number of S shaped rods (90) are equidistantly fixed on the shaft (20) perpendicular to the longitudinal axis of the shaft (80). On rotation of the shaft, the earheads undergo rubbing action and the grain is detached from the earheads. Figure 1

No. of Pages : 15 No. of Claims : 4 The Patent Office Journal No. 29/2020 Dated 17/07/2020 27145

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001397 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DEVELOPMENT OF CELL-FREE, COLOR CHANGING SMART LIPID-POLYMER CONSTRUCTS FOR ASSESSMENT OF PERMEABILITY THROUGH BIOLOGICAL BARRIERS

:A61K0008680000, (71)Name of Applicant : A61K0009510000, 1)Indian Institute of Technology Bombay (51) International classification A61K0009127000, Address of Applicant :Powai, Mumbai-400076. Maharashtra, A61K0047690000, India Maharashtra India G01N0033920000 (72)Name of Inventor : (31) Priority Document No :NA 1)Banerjee Rinti (32) Priority Date :NA 2)Adhikary Rishi Rajat (33) Name of priority country :NA 3)Sharma Vijay (86) International Application No :NA 4)Goradia Prerna

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a lipid-polymer nanoconstructs forming cell membrane mimics comprising a) nanovescicles consisting of a lipid selected from the group consisting of -phospholipids, sphingolipids (sphingomyelin, cerebrosides, ceramides), glycolipids, lipoproteins, triglycerides, fatty acids, squalene, cholesterol and cholesteryl esters; and- a diacetylene based polymer, b) an electrolytic fluid medium having pH in the range of 7 to 8. The ratio of said lipid and polymer in the nanovesicle is in the range of 1:1 to 7:1. The concentration of the nanovesicles in the fluid medium is in the range of 1 mg/mL to 5 mg/ml.

No. of Pages : 32 No. of Claims : 14

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27146

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001427 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : FUEL SUPPLY SYSTEM FOR A VEHICLE

:F02M0037000000, (71)Name of Applicant : B60K0015030000, 1)MAHINDRA AND MAHINDRA LIMITED (51) International classification B60K0015077000, Address of Applicant :Mahindra Towers Worli, Mumbai- H02M0001000000, 400018, Maharashtra, India Maharashtra India B60K0015000000 (72)Name of Inventor : (31) Priority Document No :NA 1)Sunil Kumar Singh (32) Priority Date :NA 2)Debatanaya Goswami (33) Name of priority country :NA 3)Suraj Kallappa Sawant

(57) Abstract : The present disclosure envisages a fuel supply system (100) for a vehicle. The system (100) comprises a fuel tank (10), an output tube (30), a main suction tube (20a) and a reserve suction tube (20b). The connection of output tube (10) with the main suction tube (20a) and the reserve suction tube (20b) can be manually switched using a switching element (50). A header unit (40) encloses the switching element (50) and the ends of the suction tubes (20a, 20b) and of the output tube (30) connected with the switching element (50). The fuel supply system (100) of the present disclosure alerts the user of low fuel level before the fuel tank (10) runs out of fuel, as well as prevents suction of debris accumulated within the fuel tank (10).

No. of Pages : 20 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27147

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001429 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A PROCESS FOR PREPARATION OF A STABLE PHARMACEUTICAL COMPOSITION OF BORTEZOMIB

:A61K0009190000, (71)Name of Applicant : A61K0047100000, 1)Intas Pharmaceuticals Ltd. (51) International classification A61K0009000000, Address of Applicant :Intas Pharmaceuticals Ltd. Corporate A61K0047180000, House, Near Sola Bridge, S. G. Highway, Thaltej, Ahmedabad - A61K0031690000 380054, Gujarat, India. Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Kirti Maheshwari (33) Name of priority country :NA 2)Alex George (86) International Application No :NA 3)Mukesh Bothra Filing Date :NA 4)Anil Nayani

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A process for preparation of a stable pharmaceutical composition of Bortezomib• ABSTRACT The present invention relates to a process for preparation of a stable pharmaceutical composition of Bortezomib. The said pharmaceutical composition of Bortezomib provides an improved stability compared to the reconstituted solution of the lyophilized product.

No. of Pages : 19 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27148

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001438 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DYNAMIC MULTI-CAMERA TRACKING OF MOVING OBJECTS IN MOTION STREAMS

:G06K0009000000, (71)Name of Applicant : G06T0007246000, 1)Tata Consultancy Services Limited (51) International classification G06K0009320000, Address of Applicant :Nirmal Building, 9th floor, Nariman G06T0007200000, point, Mumbai Maharashtra India G06T0007292000 (72)Name of Inventor : (31) Priority Document No :NA 1)DAS, Apurba (32) Priority Date :NA 2)SABOO, Nikhil (33) Name of priority country :NA 3)KARTHA, Manikandtan Chiralkunjunni (86) International Application No :NA 4)CHAND, Vishnu Filing Date :NA 5)NAYAK, Rajarama

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Vehicles are rigid/multi-dimensional objects capable of moving through space which do not undergo structural deformation. Existing systems/techniques analyse videos (e.g., traffic videos) for tracking moving objects either manually or through crowd sourcing and thus are less accurate due to different variations (e.g., non-linear scaling, visibility, occlusion, etc.) caused due to perspective. Present disclosure enable real-time video analytics wherein background from images in de-noised motion streams is filtered to obtain moving objects of interest. Motion map is generated to identify moving objects along-with depth information. Moving objects are then dynamically tracked by multiple cameras from scenes based on previous lost history using spatial, temporal and dynamic properties to obtain redetected moving objects trackers™ which are compared with original tracker for detecting and correcting false positives based on a Peak Signal to Noise Ratio value and a detection confidence value associated with the identified moving objects in a particular frame. [To be published with FIG. 2]

No. of Pages : 60 No. of Claims : 12

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27149

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001464 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : FECAL SLUDGE TREATMENT PLANT AND PROCESSES THEREOF

:C02F0003120000, (71)Name of Applicant : C02F0001280000, 1)DUSHYANT DUBEY (51) International classification C02F0001000000, Address of Applicant :D.D. BUILDERS AND D.D. ENVIRO B01D0021000000, ENGINEERING, S.F. - 2, SHIVHARI COMPLEX, NEAR C02F0003040000 HOTEL GULZAR, NAGPUR ROAD, JABALPUR - 482007, (31) Priority Document No :NA MADHYA PRADESH, INDIA Madhya Pradesh India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)DUSHYANT DUBEY

(57) Abstract : The present embodiment herein provides a fecal sludge treatment plant 100. The treatment plant includes an inlet pipe through which a semi-solid fecal sludge is received in the plant, a gritt screening chamber 104 to screen the incoming sludge having particle size greater than 10mm, an anoxy chamber 108 to reduce nitrogen content in the sludge, a primary lamella clarifier 110 which includes an oil and grease separator to separate oil and grease from the sludge to obtain more liquid form of the sludge, an aeration chamber 1 and 2 112,114 to dose off 50 to 80% air, thereby decreasing biochemical oxygen demand (BOD) and chemical oxygen demand (COD) of the liquid, a secondary lamella 116 to obtain a treated liquid, wherein the settleable solids drains to a sludge drawing bed and remaining water to the biological digester 106, a holding sump 118 ozonize the liquid for disinfection, a calcium carbonate sand filter 120 to maintain the PH value of the liquid, an activated carbon filter 122 which absorbs the odors and other absorbable impurities from the liquid, and a 5 micron filter 124 to remove the impurities lager than 5 micron and obtain a treated liquid acceptable for industrial consumption. FIG. 1

No. of Pages : 24 No. of Claims : 5 The Patent Office Journal No. 29/2020 Dated 17/07/2020 27150

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001476 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : IMPROVED PROCESS FOR PREPARING REINFORCED CEMENT CONCRETE BY USING SUGARCANE DISTILLERY VINNASSE AS A ADMIXTURE

:C04B0028020000, (71)Name of Applicant : C08J0005040000, 1)Prof. Uday kumar J. Phatak (51) International classification C04B0028040000, Address of Applicant :Flat No. AA7,Chandrangan Housing C04B0038000000, Society, Ambegaon Pathar, pune-411046 Maharashtra India C04B0020000000 2)Prof. Shubhangi A. Kakade (31) Priority Document No :NA 3)Dr. Suryakant Babanrao Patil (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)Prof. Uday kumar J. Phatak (86) International Application No :NA 2)Prof. Shubhangi A. Kakade Filing Date :NA 3)Dr. Suryakant Babanrao Patil

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention generally relates to the field of concrete admixtures and in particularly relates for preparing the reinforced cement concrete by using sugarcane distillery vinnasse as an admixture. A method for preparing reinforced cement concrete by using sugarcane distillery vinnasse as an admixture is provided. The method includes the steps of: collecting and testing of Vinnasse; collecting of Materials including cement, Fine Aggregate, and Coarse Aggregate; determining RCC Material properties; developing standard concrete mix design; checking suitability of vinnasse for replacement of cement and acting as admixture; and preparing reinforced cement concrete by using sugarcane distillery vinnasse based on said checking.

No. of Pages : 22 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27151

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001497 A (19) INDIA (22) Date of filing of Application :12/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND APPARATUS FOR WORKFLOW AUTOMATION

:G06F0003120000, (71)Name of Applicant : G06Q0010060000, 1)SANJAY CHANDRAMOHAN MAHESHWARI (51) International classification G06Q0010100000, Address of Applicant :C/o.: Kothari Info-Tech private G05B0019418000, Limited, 802, Empire State Building, Ring Road, Surat. 395002. G06Q0020360000 Gujarat, INDIA Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)SANJAY CHANDRAMOHAN MAHESHWARI

(57) Abstract : Disclosed is an apparatus for developing a process flow to allow an user to execute a manufacturing process, the apparatus comprises: a) a data connector for allowing data connections between the apparatus and various associated input resources; a job ticket comprises various data sections required by the process for manufacturing; a job ticket generator for allowing user interaction to carry out a plurality of task and automatically generate the Job ticket from incoming order data; a process creator to define and create the process with stages for user defined process execution; b) postal agents for moving a job ticket to its next destination based on tracking of information and updates the current status of the job and transmits to a control panel; c) a job ticket server making available the applicable job ticket for execution of task, to a particular stage in the process; a processing client for initiating a call to an end point; and configurable end points; and d) a control panel for displaying the status of the process flow development, wherein the components (a to d) being connected together in a network.

No. of Pages : 41 No. of Claims : 12

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27152

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001506 A (19) INDIA (22) Date of filing of Application :13/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS FOR PREPARATION OF DIRECTLY COMPRESSIBLE DRY POWDER FORMULATION OF ASTAXANTHIN

:A61K0009200000, (71)Name of Applicant : A61K0009000000, 1)Gangwal Chemicals Private Limited (51) International classification A61K0009160000, Address of Applicant :706-707 Quantum Towers, Rambaug A61K0009140000, Lane, Off SV Road, Malad (W), Mumbai Maharashtra India A23K0050800000 (72)Name of Inventor : (31) Priority Document No :NA 1)Anil K. Jain

(32) Priority Date :NA (33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Abstract The present invention involves a manufacturing process for preparing directly compressible stable dry powder formulation of Astaxanthin by granulation for manufacturing of pharmaceutical and nutraceutical preparations.

No. of Pages : 10 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27153

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001559 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : "AN IMPROVED PROCESS FOR THE PREPARATION OF RECOMBINANT PROTEIN".

:C12N (71)Name of Applicant : (51) International classification 15/35 1)UNICHEM LABORATORIES LIMITED (31) Priority Document No :NA Address of Applicant :UNICHEM BHAVAN,PRABHAT (32) Priority Date :NA ESTATE, OFF.S.V.ROAD, JOGESHWARI (W), MUMBAI, (33) Name of priority country :NA MAHARASHTRA,INDIA, PIN CODE: 400102 Maharashtra (86) International Application No :NA India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)DR. DHANANJAY SATHE (61) Patent of Addition to Application Number :NA 2)DR SUDEEP KUMAR

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to the process to prepare recombinant lectin having amino acid sequence of SEQ ID NO:l, wherein the process comprises fed-batch fermentation of a clone in a host cell at specific feeding rate with Carbon to Nitrogen ratio of 3:1 to 6:1. The invention also relates to the process of purification of recombinant lectin having amino acid sequence of SEQ ID NO:1.

No. of Pages : 50 No. of Claims : 35

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27154

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001600 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A UNITARY HOUSING

:F15B0013080000, (71)Name of Applicant : F16K0027000000, 1)MAHINDRA AND MAHINDRA LIMITED (51) International classification F04B0001220000, Address of Applicant :Mahindra Towers Worli, Mumbai- F16K0027020000, 400018, Maharashtra, India Maharashtra India B05B0007120000 (72)Name of Inventor : (31) Priority Document No :NA 1)MAXSON GOMES (32) Priority Date :NA 2)ANIL HIRGUDE (33) Name of priority country :NA 3)MAHENDRA JAWARE (86) International Application No :NA 4)SAVANT KEDARNATH Filing Date :NA 5)RAJENDRA N YEDEKAR

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure envisages a unitary housing (100) for housing hydraulic components, wherein the hydraulic components are configured for operating a hitch mechanism of a tractor. The unitary housing (100) comprises cavities for locating valve mechanisms therein and a cylinder (110) for accommodating a reciprocating piston (210). The unitary housing (100) together with a plurality of valve mechanisms (122, 124, 126, 128, 130, 132) disposed in corresponding cavities, forms a predetermined hydraulic circuit (1000). The hydraulic circuit (1000) has minimum number of leakage joints, minimizes number of components and therefore assembly and machining operations. [Selected drawing Figure 5]

No. of Pages : 33 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27155

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001601 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS FOR PREPARATION OF GLYCOPYRROLATE INTERMEDIATE

:A61K0031400000, (71)Name of Applicant : C07C0059500000, 1)NEON LABORATORIES LIMITED (51) International classification C07D0249080000, Address of Applicant :140, Damji Shamji Industrial Complex, C12P0007420000, Plot No. 28, Mahal Industrial Estate, Mahakali Caves Road, C07C0047575000 Andheri (East), Mumbai - 400093, Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)DALVI, Mahesh Bhagoji (33) Name of priority country :NA 2)KENNY, Rajesh Shashikant (86) International Application No :NA 3)PALKAR, Tushar Tanaji

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention discloses an improved process for preparation of highly pure cyclopentyl mandelic acid derivative of formula (I), an intermediate of glycopyrrolate, without using hazardous chemicals.

No. of Pages : 14 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27156

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001605 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : "RUBBER COMPOUND POLYCHLOROPRENE BASE HA 2513 FOR INDUSTRIAL APPLICATIONS"

(71)Name of Applicant : :C08L 1)AIRCRAFT UPGRADE RESEARCH & DESIGN (51) International classification 91/00 CENTRE (AURDC), HINDUSTAN AERONAUTICS (31) Priority Document No :NA LIMITED,NASIK DIVISION (32) Priority Date :NA Address of Applicant :CENTRAL LABORATORY, (33) Name of priority country :NA AIRCRAFT UPGRADE RESEARCH & DESIGN CENTRE, (86) International Application No :NA HINDUSTAN AERONAUTICS LIMITED, Filing Date :NA OJHAR(MIG),NASIK (M.S.), PIN CODE: 422207 Maharashtra (87) International Publication No : NA India (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)AJIT BHANDAKKAR CHIEF MANAGER (DI & SL) (62) Divisional to Application Number :NA 2)S.R. MUKUNDE CHIEF MANAGER(LAB) Filing Date :NA 3)SMITA S. PATIL MANAGER (LAB)

4)LATHA B. MANAGER(LAB)

(57) Abstract : A Polychloroprene base Rubber compound HA 2513 has been evolved in which specific ratio of vulcanizing agent, antioxidants, accelerator modifier, fillers, plasticizers and accelerator are added using a newly formulated process, to meet aircraft applications. The Rubber compound has been evaluated for tests like Tensile strength, % Relative Elongation at break, % Residual Elongation at break, Hardness Shore, Ageing coefficient, Gravimetric swelling in the media, brittleness temperature and density. The rubber compound is used for manufacturing of gaskets, sealing for aircraft use and can be used in other applications sectors like Automobile, Space and other Industries.

No. of Pages : 9 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27157

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001620 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR TRACKING ACTIVITIES OF HYPERLOCAL MARKETPLACE

:G06Q0030020000, (71)Name of Applicant : H04W0004021000, 1)Saurabh Nandkishor Sonar (51) International classification H04W0012060000, Address of Applicant :1504, Tower 31, Amanora Park Town, G06Q0010100000, Hadapsar, Pune “ 411028 Maharashtra India G06Q0050060000 2)Vaishnavi Saurabh Sonar (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Saurabh Nandkishor Sonar (33) Name of priority country :NA 2)Vaishnavi Saurabh Sonar

(57) Abstract : A system for tracking activities of hyperlocal marketplace is provided. The system includes a registration module to register a customer and retailers. A retrieval module retrieves data related to the customer and data related to the retailers. A generation module enables the retailers to generate a geo-fence based on the data related to the retailers, enables the customer to create a purchasing list of at least one product to be purchased by the customer. A product pricing alert module monitors pricing of the at least one product pricing in a specific area of intersecting geo-fence of the retailers and alert the retailers for the lowest on-going price for the product within the area. A delivery module authenticates the unique code at the time of delivery. An alert and a notification module to send alerts, offers to customer corresponding to interests of the customer on entering the geo-fence of active alert. FIG. 1

No. of Pages : 33 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27158

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001624 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : EMERGENCY STRETCHER TROLLY

:A61G0001020000, (71)Name of Applicant : A61G0001056000, 1)Kider India Pvt. Ltd. (51) International classification A61G0007050000, Address of Applicant :New Gat 584/2, Koregaon Bhima, A47C0027140000, Taluka Shirur Maharashtra India A61G0003000000 (72)Name of Inventor : (31) Priority Document No :NA 1)MUNOT, Manoj Kumar (32) Priority Date :NA 2)NAIKWADI, Rajeev

(57) Abstract : Disclosed herein, a stretcher trolleys specially designed for transferring causalities to the hospital in an ambulance, wherein said stretcher comprising a base frame, foam mattress with two foldable joints, a collapsible side rail and foldable leg with trolley having swivel caster wheels leg folding assigned by manually operated legs, individually for front & rear leg and wherein the folding and unfolding mechanism is based on toggle lever mechanism assisted by springs which enable the legs to not fold when in unfold condition due to this mechanical locking arrangement.

No. of Pages : 14 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27159

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001655 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM OF CELL SEARCH IN NARROW BAND (NB) LTE

:H04W0048160000, (71)Name of Applicant : H04W0048180000, 1)RELIANCE JIO INFOCOMM LIMITED (51) International classification H04J0011000000, Address of Applicant :101, Saffron, Nr. Centre Point, H04W0004020000, Panchwati 5 Rasta, Ambawadi, Ahmedabad-380006, Gujarat, G06F0016170000 India Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)SURESH ANUPINDI (33) Name of priority country :NA 2)RADHAKRISHNAN RAJU (86) International Application No :NA 3)SESHU BABU SONGA Filing Date :NA 4)RAJESH BOORAVALLI SEETHARAMA SASTRY (87) International Publication No : NA 5)GAUTAM KUMAR GUPTA

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : METHOD AND SYSTEM OF CELL SEARCH IN NARROW BAND (NB) LTE The present disclosure may relate to method and system of cell search in NB LTE. The method comprises maintaining, a look-up table, wherein said look-up table comprises entries of NB eNodeB location co-ordinates, a circle information, and a list of EARFCNs corresponding to each of said location co-ordinates. The method then detects, a current location co-ordinates. The method further maps, said detected current location co-ordinates to at least one nearby NB eNodeB location. Thereafter the method sorts, said look-up table based on at least one location co-ordinate and performs, an optimized search in the look-up table to identify at least one NB LTE cell, wherein said optimized search is based on the list of EARFCNs corresponding to said current location coordinates.

No. of Pages : 26 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27160

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001701 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS TECHNOLOGY FOR PRODUCTION OF PROTEIN-ENERGY RICH, STABLE AND READY TO EAT COMPLIMENTARY FOOD SPREAD (RTE COMFO SPREAD).

:A23L0025100000, (71)Name of Applicant : A23D0007015000, 1)Director, ICAR-CIAE, Bhopal (51) International classification A23L0007122000, Address of Applicant :Director ICAR-Central Institute of A23L0025000000, Agricultural Engineering Nabi Bagh, Berasia Road Bhopal - A21D0002260000 462038, Madhya Pradesh, India Madhya Pradesh India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Dr. Manoj Kumar Tripathi (33) Name of priority country :NA 2)Dr. Saroj Kumar Giri (86) International Application No :NA 3)Dr. Sumedha Deshpande

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : This invention relates with the development of process technology for production of protein-energy rich, stable and ready to eat complimentary food spread (RTE Comfo spread) comprising an essentially homogeneous dispersion of finely grinded peanut in a continuous oil phase, the improvement which comprises oil content of about 20 to 30% by total weight. Comfo spread product made from peanut, composite flour and dried food ingredients is of ready to eat type. The product have high-viscosity, high protein content and excellent stability. Product prepared by mixing dried powdered ingredients with a vegetable fat chosen for its viscosity. Spreads are not traditionally used for feeding infants or young children and were initially proposed for feeding severely malnourished children during the recovery phase. Developed spreads could be designed to boost the nutritional density of diets of young children. The peanut based spread was produced by grinding the roasted, full fat peanuts into a slurry, admixing the slurry with of edible salt, defatted soy flour and fruit-soymilk based composite flour, moringa leaves powder, sugar, admix a sweetener, vegetable oil, salt, stabilizer, natural colour producing ingredients and flavour agent with the admixture to make a paste. A product with high protein content (up to 30- 35%), reduced fat(up to about 20-25%) compared to commercially available peanut based spread, antioxidant activity up to 70% free radical scavenging, and moisture up to 1-3 % is produced with roasted, soaked, fermented ingredients. Developed ready to eat (RTE) spread is energy-dense lipid pastes and resistant to bacterial contamination because of low moisture content. The high fat content in the developed food product mainly control the viscosity, and a melting point adjusted to make the resulting product easy to store and to swallow.

No. of Pages : 26 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27161

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001710 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : "STEAM BREAKING DEVICE FOR BOILING LIQUID".

:F22D (71)Name of Applicant : (51) International classification 1/12 1)MS. BHAGYASHRI DATTATRAY RAJOLE (31) Priority Document No :NA Address of Applicant :AT.PO.KHADAK,MALEGAON, (32) Priority Date :NA TAH.NIPHAD, DIST.NASHIK, MAHARASHTRA,INDIA, PIN: (33) Name of priority country :NA 422 304 Maharashtra India (86) International Application No :NA 2)DR. ISHVAR LAKHICHAND PARDESHI Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)MS. BHAGYASHRI DATTATRAY RAJOLE (61) Patent of Addition to Application Number :NA 2)DR. ISHVAR LAKHICHAND PARDESHI

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Present invention is related to food processing devices and utensils. More particularly, the devices wherein the device breaks the steam from the boiling liquid like milk and avoids losses due to spilling out of liquid foods/ materials during its boiling. In accordance with the present invention, the steam breaking device (10) essentially comprises of a base plate (100), central vapour venting pipe (300) and cover plate (501). The vapour breaking device avoids the wastage of boiling liquid/ milk and thus can add to net availability of milk/ liquid food being boiled. It is very simple in construction, use and its maintenance. The use of the device minimizes the accidents due to burns and avoid chocking of burners of gas stove.

No. of Pages : 18 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27162

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001714 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMPOSITION AND METHOD OF FORMULATION OF SUSTAINED RELEASED PELLETS OF METFORMIN HYDROCHLORIDE

:A61K0031155000, (71)Name of Applicant : A61K0009200000, 1)Shaikh Mohammad Shoaib Jamil (51) International classification A61K0047320000, Address of Applicant :Near Deshmukh Hospital, Millat A61K0009000000, Colony, ward no.3(B), Khamgaon Dust. Buldhana-444303 A61K0009107000 Maharashtra India (31) Priority Document No :NA 2)Dr. Aijaz Ayyub Sheikh (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)Shaikh Mohammad Shoaib Jamil (86) International Application No :NA 2)Dr. Aijaz Ayyub Sheikh Filing Date :NA 3)Dr. Subhash Vishwanath Deshmane (87) International Publication No : NA 4)Dr. Kailash Radhesham Biyani

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a composition and method of formulation of sustained released pellets of Metformin Hydrochloride. The aim of the present invention is to develop a sustained release formulation of Metformin to maintain constant therapeutic levels of the drug for over 8 hrs. Metformin sustained release pellets are prepared by pelletization method with different types of polymer. For the formulation of sustained release pellets the combination of HPMC K15M and PVP K30 are used. Other excipients are used like Talc and Isopropyl alcohol.

No. of Pages : 19 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27163

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001726 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : IMPROVED EFFICIENCY, POWER FACTOR CONTROLLED THREE PHASE INDUCTION MOTOR DRIVE FOR WATER PUMP APPLICATIONS

:H02P (71)Name of Applicant : (51) International classification 3/00 1)DHANANJAY R TUTAKNE (31) Priority Document No :NA Address of Applicant :SHRI SAI COLLEGE OF (32) Priority Date :NA ENGINEERING, 17, NAGPUR-CHANDRAPUR, (33) Name of priority country :NA BHADRAWATI,MAHARASHTRA, INDIA, PIN CODE: 442902 (86) International Application No :NA Maharashtra India Filing Date :NA 2)DR.J.F.AGRAWAL (87) International Publication No : NA 3)UMESH G.BONDE (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)DHANANJAY R TUTAKNE (62) Divisional to Application Number :NA 2)DR.J.F.AGRAWAL Filing Date :NA 3)UMESH G.BONDE

(57) Abstract : Three phase induction motor are widely used AC motor in most of the industries for fans and blowers. In the proposed scheme three phase induction motor is having the controllable power factor which is done by an extinction angle control technique. Only three semiconductor switches are required. This is a technique in which freewheeling switches are not required the work of freewheeling is performed by the small value capacitors connected across the stator winding of three phase induction motor. The performance efficiency of the motor has been increased.

No. of Pages : 8 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27164

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001741 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR DEEP NEURAL NETWORK BASED CANDIDATE PROFILE GENERATION AND EVALUATION

:G06N0003080000, (71)Name of Applicant : H03M0007460000, 1)Tata Consultancy Services Limited (51) International classification G06F0009460000, Address of Applicant :Nirmal Building, 9th Floor, Nariman G06N0003040000, Point, Mumbai - 400021, Maharashtra, India Maharashtra India G06F0009480000 (72)Name of Inventor : (31) Priority Document No :NA 1)GEORGE, Vignesh (32) Priority Date :NA 2)KHAN, Mohammed Farouq (33) Name of priority country :NA 3)TOMMY, Robin

(57) Abstract : Existing automation approaches have limitations in adapting to users response to dynamically generate or constructing a successive question. Embodiments herein provide a method and system for Deep Neural Network (DNN) based candidate profile generation and evaluation, wherein the method provides appropriately choosing the successive question so as to provide maximum information required to fill the content of the plurality of elements of the schema, effectively optimizing the time required for relevant information extraction. The method disclosed selects the successive question based on multiple aspects such as candidates answer or response to previous question, relevant information extracted from all previous responses and seamlessly reshuffling the question in the queue. Successive questions selected are such that they enable extracting maximum information relevant information of the candidate in accordance with minimum questions.

No. of Pages : 40 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27165

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001760 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : IMPROVED PROCESS FOR SYNTHESIS OF TICAGRELOR AND NOVEL POLYMORPHIC FORM THEREOF

:C07D0487040000, (71)Name of Applicant : A61K0031519000, 1)KOPRAN RESEARCH LABORATORIES LTD. (51) International classification C07D0239470000, Address of Applicant :Plot No. K4/4 Addl. MIDC Indl. Area, C07D0295096000, At Post Birwadi, Tal. Mahad, Dist. Raigad, Pin code 402302, C07F0009656100 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)SOMANI, Surendra (33) Name of priority country :NA 2)JAIN, Ajit (86) International Application No :NA 3)SAXENA, Ashvini Filing Date :NA 4)DONGARGE, Mahesh Yogiraj (87) International Publication No : NA 5)KATORE, Nilesh Appasheb (61) Patent of Addition to Application Number :NA 6)CHAUGULE, Suryabhan Baban

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Disclosed herein is an improved process for synthesis of Ticagrelor, its intermediates in good yield and purity. The present invention further discloses novel crystalline Ticagrelor polymorph depicted in Fig 1.

No. of Pages : 37 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27166

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001768 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR PLANT HEALTH ESTIMATION

:G06K0009000000, (71)Name of Applicant : G01N0021630000, 1)Tata Consultancy Services Limited (51) International classification A01G0007000000, Address of Applicant :Nirmal Building, 9th floor, Nariman B22D0011160000, point, Mumbai Maharashtra India G01N0033000000 (72)Name of Inventor : (31) Priority Document No :NA 1)MOHITE, Jayantrao (32) Priority Date :NA 2)KIMBAHUNE, Sanjay (33) Name of priority country :NA 3)PAPPULA, Srinivasu (86) International Application No :NA 4)SINGH, Dineshkumar Filing Date :NA 5)SARANGI, Sanat

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Plant health estimation is required to be performed so as to detect any health issues in early stages, so as to take counter measures. Existing systems for the plant health estimation perform the health estimation by considering data obtained from satellite images of the plants being monitored. However this alone may not be much effective as the satellite images fail to provide information on many parameters which have direct or indirect impact on health of the plants. Disclosed herein are a method and a system for plant health estimation, wherein the system performs health estimation at a macro level and a micro level. The macro level health estimation is done using satellite images of the plants as inputs, whereas the micro level health estimation is done by collecting and processing sensor data with respect to various parameters that affect health of a plant. <

No. of Pages : 24 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27167

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001769 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : UNOBTRUSIVE AND AUTOMATED DETECTION OF FREQUENCY OF VIBRATING OBJECTS USING MULTIPLE STROBE SOURCES

:A61B0005160000, (71)Name of Applicant : H04N0005247000, 1)Tata Consultancy Services Limited (51) International classification H04L0029120000, Address of Applicant :Nirmal Building, 9th floor, Nariman H04B0003230000, point, Mumbai Maharashtra India G06F0016220000 (72)Name of Inventor : (31) Priority Document No :NA 1)ROY, Dibyendu (32) Priority Date :NA 2)CHAKRAVARTY, Tapas (33) Name of priority country :NA 3)PAL, Arpan (86) International Application No :NA 4)MISRA, Archan

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : This disclosure relates to monitoring of machines having one or more vibrating objects. Conventional systems that address the technical problem of detecting frequency of vibrating objects are expensive, require manual intervention, sometimes depend on prior knowledge of location of faults or involve high convergence time. Systems and methods of the present disclosure provide a cost- effective and fully automated solution that employ multiple strobe sources along with a low cost camera. Besides being cost-effective and automated, the solution also reduces convergence time significantly. Employing multiple strobe sources enables generating multiple strobing frequencies in a single iteration. The strobing frequency is a configured to be a multiple of a camera frame rate selected from a set of camera frame rates having mutually prime elements to ensure faster convergence compared to the art. [To be published with FIG. 1]

No. of Pages : 34 No. of Claims : 12

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27168

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001795 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SYSTEM FOR AUTOMATICALLY DISSIPATING CONTAMINATED GASES PRESENT WITHIN A CABIN OF THE VEHICLE

:B60H0001000000, (71)Name of Applicant : F24F0013220000, 1)Tata Motors Limited (51) International classification B60H0001320000, Address of Applicant :Bombay House, 24 Homi Mody Street, F24F0013140000, Hutatma Chowk, Mumbai - 400001, Maharashtra, India H02J0007040000 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)DUBEY, Mayank (33) Name of priority country :NA 2)MEENA, Jagvendra (86) International Application No :NA 3)TADIGADAPA, Suresh

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure discloses a system 100 for automatically dissipating contaminated gases present within the vehicle. The system comprises an Air Conditioner (AC) or a Heating Ventilation and Air Conditioning (HVAC) system, a sensor, and an Electronic Control Unit (ECU). The AC (or HVAC) unit comprises an evaporator side and a condenser side. The evaporator side facilitates blowing air within a cabin of a vehicle through an AC blower. The condenser side facilitates suction of ambient air through air suction cut outs 114 and facilitates heat exchange with and heat rejection to the ambient air on the condenser side. It may be noted that the evaporator side and the condenser side are separated by a movable/adjustable partition flap 108. The sensor generates a signal indicating detection of contaminated gases within the cabin. The ECU switches off the AC upon receipt of the signal from the sensor. The ECU further opens the movable/adjustable partition flap 108. The ECU further closes the air suction cut outs 114 and enables suction of the contaminated gases from the cabin and facilitates exhaust of contaminated gases from condenser side 106 with the help of condenser fan(s) 116.

No. of Pages : 18 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27169

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001833 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : BUFFER SOLUTION FOR STORAGE OF BIOLOGICAL MATERIAL.

:A61K0009000000, (71)Name of Applicant : A61K0031191000, 1)DR. GANGADHAR M. WARKE (51) International classification A61K0047260000, Address of Applicant :HiMEDIA LABORATORIES C12N0001040000, PRIVATE LIMITED, 23 VADHANI INDUSTRIAL ESTATE, A61K0033260000 L.B.S. ROAD, GHATKOPAR (WEST), MUMBAI-400 086, (31) Priority Document No :NA MAHARASHTRA,INDIA. Maharashtra India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)DR. RAHUL GANGADHAR WARKE (86) International Application No :NA 2)DR. VISHAL GANGADHAR WARKE Filing Date :NA 3)MILAN RAJESH SATARDEKAR (87) International Publication No : NA 4)TRUPTI CHINTAMAN RAUT (61) Patent of Addition to Application 5)DR. GIRISH BADRINATH MAHAJAN :NA Number 6)DR. GANGADHAR MOTIRAM WARKE :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a composition comprising of various buffers such as phosphate buffer, acetate buffer, tris buffer, hydrochloric acid buffer, acid phthalate buffer, Neutralized phthalate buffer, alkaline borate buffer, metal salts ,specifically divalent cationic salts of chloride/sulphate/nitrate as anionic moiety, glutamic acid and/ or its salts (Sodium glutamate, calcium glutamate, potassium glutamate, ferrous glutamate), growth stimulator, coenzymes which helps to retain cell viability, gluconic acid and/ or its salts (Sodium gluconate; Calcium gluconate, Magnesium gluconate, Zinc gluconate, Ferrous gluconate), growth stimulator, carbohydrates, amino acid or either individual amino acids and vitamin mixture or either individual vitamin. It also relates to a process of hydration of microorganisms, protection of microorganisms during drying, storage and/or reconstitution, to a process of making the culture powder and to products comprising the culture powder. This invention also relates to the storage of microorganisms, cells and tissues.

No. of Pages : 17 No. of Claims : 12

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27170

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001870 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS FOR PREPARATION OF DEUTETRABENAZINE•

:C07D0213127000, (71)Name of Applicant : C07F0017000000, 1)Glenmark Life Sciences Limited (51) International classification C07C0051090000, Address of Applicant :Glenmark House, HDO- Corporate C07C0067343000, Building, Wing-A B. D. Sawant Marg, Chakala, Andheri (East) C07C0255350000 Mumbai Maharashtra India 400099 Maharashtra India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)GADGE, Sandip Tukaram (33) Name of priority country :NA 2)GAIKWAD, Nandkumar (86) International Application No :NA 3)THANKI, Bhavin Prabhudas Filing Date :NA 4)KADAM, Suresh (87) International Publication No : NA 5)BHIRUD, Shekhar Bhaskar

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a process for the preparation of deutetrabenazine. the process comprising reacting a compound of formula V with dehydrogenating reagent to give a compound of formula IV; reacting the compound of formula IV with a deuterated methylating agent to obtain compound of formula II; reacting compound of formula II with compound of formula IIIa or IIIb, to give deutetrabenazine.

No. of Pages : 30 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27171

(12) PATENT APPLICATION PUBLICATION (21) Application No.201921001875 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : BIODEGRADABLE AND BIOCOMPOSITIBLE PACKAGING MATERIAL AND A METHOD OF PREPARATION THEREOF

:H04L0029080000, (71)Name of Applicant : C07D0417140000, 1)Indian Institute of Technology Bombay (51) International classification C07D0417060000, Address of Applicant :Powai, Mumbai 400076, Maharashtra, C07D0413140000, India Maharashtra India C07D0263320000 (72)Name of Inventor : (31) Priority Document No :NA 1)Banerjee Rinti (32) Priority Date :NA 2)Kapoor Mudra Saurabh

(57) Abstract : The present invention relates to a biodegradable and biocompostible packaging material. The packaging material comprises a biopolymer and polyvinyl alcohol. The packaging material of the present invention is biodegradable, edible, has barrier properties and high tensile strength, and can be antibacterial. The present invention also provides a method of preparing the biodegradable and biocompostible packaging material. Figure I

No. of Pages : 14 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27172

(12) PATENT APPLICATION PUBLICATION (21) Application No.201923001144 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : HAIR FOLLICULAR UNIT IMPLANTATION DEVICE

:A61B0017000000, (71)Name of Applicant : A61F0002100000, 1)Dr. Sanjiv Vasa (51) International classification A61B0017340000, Address of Applicant :D/904 Asawari Towers Behind Wide A61N0005060000, Angle Cinema, S. G. Highway, Satellite Area, Ahmedabad A61B0017320500 380015 Gujarat India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Dr. Sanjiv Vasa

(33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :645/MUM/2013 Filed on :04/03/2013 (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention which is an improvement to the device of invention in the patent application no. 645/MUM/2013, relates to a hair follicular unit Implantation device to implant hair follicles of variable length with speed, accuracy and minimal trauma while maintaining follicular integrity resulting in better yield, and method of its use in hair restoration process. The device of the present invention can implant variable length of hair (short or long), harvested both by open & close methods, follicles with or without epidermal collar maintaining its integrity and without being buried completely in the substrate and allows plantation under direct vision. The improved device has a loading area proximal to the retaining area which ends proximally into the loading area and distally into the piercing end. The ratios of dimensions of components of the two devices are also different.

No. of Pages : 32 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27173

(12) PATENT APPLICATION PUBLICATION (21) Application No.201923001267 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A TECHNOLOGY AND PROCESS FOR 3D PRINTING USING SWARF PARTICLES

:A61L0027340000, (71)Name of Applicant : B82Y0030000000, 1)INDIAN INSTITUTE OF TECHNOLOGY ROPAR (51) International classification B23Q0011000000, Address of Applicant :INDIAN INSTITUTE OF B82Y0040000000, TECHNOLOGY ROPAR, Nangal Road, Rupnagar - 140001, B05D0007000000 Punjab, India Punjab India (31) Priority Document No :NA 2)SWINBURNE UNIVERSITY OF TECHNOLOGY (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)SINGH, Malkeet (86) International Application No :NA 2)SINGH, Harpreet Filing Date :NA 3)BERNDT, Christopher Charles (87) International Publication No : NA 4)SARKAR, Prabir

(61) Patent of Addition to Application Number :201811029355 Filed on :03/08/2018 (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Disclosed is a technology being implemented in an apparatus (100) for depositing multiple layers of a stream of swarf particles (112). The stream of swarf particles (112) is generated by interfacing a cutting abrasive wheel (110) on a workpiece (108). The generated stream of swarf particles (112) may be directed towards a cavity of a die (104). Multiple layers of stream of swarf particles (112) further results in a 3D printed object that takes the shape of the cavity of the die (104). The apparatus (100) may also be used to coat substrates. Substrates may include but not limited to metal surfaces, polymers, and ceramics.

No. of Pages : 19 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27174

(12) PATENT APPLICATION PUBLICATION (21) Application No.201924050907 A (19) INDIA (22) Date of filing of Application :10/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : MULTI-CHIP PACKAGE

:H01L0023000000, (71)Name of Applicant : G11C0029500000, 1)SAMSUNG ELECTRONICS CO,. LTD. (51) International classification H01L0025065000, Address of Applicant :129 Samsung-ro Yeongtong-gu, H04L0025020000, Suwon-si, Gyeonggi-do Republic of Korea 06719 Republic of G05B0019042000 Korea (31) Priority Document No :10-2019-0003644 (72)Name of Inventor : (32) Priority Date :11/01/2019 1)NA, Dae Hoon (33) Name of priority country :Republic of Korea 2)LEE, Jang Woo (86) International Application No :NA 3)BYUN, Jin Do Filing Date :NA 4)IHM, Jeong Don

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided are multi-chip packages. A multi-chip package includes a first memory chip and a second memory chip on a printed circuit board; a memory controller electrically connected to the first memory chip and the second memory chip via a first bonding wire and a second bonding wire; and a strength control module configured to control a drive strength of each of a first output driver of the first memory chip and a second output driver of the second memory chip, wherein the memory controller includes an interface circuit configured to receive each of first test data and second test data from the first output driver and the second output driver in which the drive strength is set by the strength control module, and output detection data for detecting whether the first bonding wire and the bonding wire are short-circuited based on the first and second test data.

No. of Pages : 45 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27175

(12) PATENT APPLICATION PUBLICATION (21) Application No.201924053763 A (19) INDIA (22) Date of filing of Application :24/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : LIGHTING DEVICE

:C09K0011560000, (71)Name of Applicant : F21V0009080000, 1)InnoLux Corporation (51) International classification G02F0001133500, Address of Applicant :No. 160 Kesyue Rd., Jhu-Nan Site, C09K0011880000, Hsinchu Science Park, Jhu-Nan, Miao-Li County, H01L0025075000 (Postal Code: 350) Taiwan (31) Priority Document No :16/246,540 (72)Name of Inventor : (32) Priority Date :13/01/2019 1)LIN, Hsiao-Lang (33) Name of priority country :U.S.A. 2)TSAI, Tsung-Han

(57) Abstract : A lighting device includes a substrate, a plurality of first light converting units, and a light source. The light source emits a light passing through the plurality of first light converting units and the substrate to generate a first spectrum including a main peak between 520 nanometers (nm) to 590 nm and a first sub peak between 430 nm to 470 nm, and a first transmittance of the substrate at a wavelength of the main peak is greater than a second transmittance of the substrate at a wavelength of the first sub peak.

No. of Pages : 41 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27176

(12) PATENT APPLICATION PUBLICATION (21) Application No.201924053903 A (19) INDIA (22) Date of filing of Application :26/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR PROVIDING INSTALLMENT FACILITYON ELECTRONIC TRANSACTIONS

:G06Q0020400000, (71)Name of Applicant : G06Q0040020000, 1)MASTERCARD INTERNATIONAL INCORPORATED (51) International classification G06Q0020020000, Address of Applicant :2000 PURCHASE STREET, G06Q0020100000, PURCHASE, NEW YORK 10577, U.S.A. G06Q0020380000 (72)Name of Inventor : (31) Priority Document No :10201900311U 1)VIDIT BHARGAVA

(32) Priority Date :14/01/2019 (33) Name of priority country :Singapore (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method includes providing a brand-agnostic installment facility on transactions by way of transaction cards. A processing server receives authorization requests corresponding to the transactions from corresponding payment networks. The processing server translates the authorization requests to a format readable by an installment management server. The installment management server checks whether the transactions are eligible for the installment facility and generates installment plans when the transactions are determined to be eligible. The installment management server populates the authorization requests with the corresponding installment plans and communicates the populated authorization requests to the processing server. The processing server retranslates the populated authorization requests to their previous format for transmitting to corresponding issuers for approval of the installment plans. The approved installment plans are presented to customers, thereby enabling the customers to avail the installment facility on the corresponding transactions irrespective of card brands of their transaction cards.

No. of Pages : 55 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27177

(12) PATENT APPLICATION PUBLICATION (21) Application No.201924053906 A (19) INDIA (22) Date of filing of Application :26/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR PROCESSING TRANSACTIONS FORINSTALMENTS

:G06Q0020400000, (71)Name of Applicant : G07F0019000000, 1)MASTERCARD INTERNATIONAL INCORPORATED (51) International classification G06Q0030060000, Address of Applicant :2000 PURCHASE STREET, G06Q0020380000, PURCHASE, NEW YORK 10577, U.S.A. G06Q0020100000 (72)Name of Inventor : (31) Priority Document No :10201900317W 1)VIDIT BHARGAVA (32) Priority Date :14/01/2019 2)HASEENA PARVIN KHASIM SAB

(33) Name of priority country :Singapore (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method for processing transactions for instalments includes receiving a transaction request for a transaction initiated at an automated teller machine (ATM) by a user by using a financial account of the user. An eligibility of the user for availing an instalment facility on the transaction is determined in real-time based on a set of rules. Further, the user is provided an option to avail the instalment at the ATM when the user is determined eligible to avail the facility and the transaction is authorized for instalments. If the user opts for availing the instalment facility, a set of instalment plans are generated in real-time for the user. The transaction is processed for instalments based on an instalment plan selected by the user.

No. of Pages : 73 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27178

(12) PATENT APPLICATION PUBLICATION (21) Application No.201924053912 A (19) INDIA (22) Date of filing of Application :26/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR PROCESSING CASH-DEPOSIT TRANSACTIONS

:G07F0019000000, (71)Name of Applicant : G06Q0020320000, 1)MASTERCARD INTERNATIONAL INCORPORATED (51) International classification G06Q0020040000, Address of Applicant :2000 Purchase Street, Purchase, NY G06Q0020200000, 10577 U.S.A. G06Q0020100000 (72)Name of Inventor : (31) Priority Document No :10201900312X 1)Ritesh Chaudhari (32) Priority Date :14/01/2019 2)Shrinivas Ambadas Kalvit (33) Name of priority country :Singapore 3)Sudhir Shirke

(57) Abstract : A method for facilitating cash-deposit transactions includes generation of a transaction code by a currency recycler, when a customer submits one or more currency bills to the currency recycler for a cash-deposit transaction. The customer captures the transaction code using a service application accessible on a customer device. The customer provides account details of a recipient account to the service application. An issuer receives the transaction code and the account details from the service application, and communicates an approval request to the currency recycler, seeking an approval of the customer for the cash-deposit transaction. The currency recycler communicates an approval response to the issuer when the customer approves the cash-deposit transaction. The issuer credits an amount equivalent to the value of the one or more currency bills to the recipient account based on the approval response

No. of Pages : 65 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27179

(12) PATENT APPLICATION PUBLICATION (21) Application No.201924054459 A (19) INDIA (22) Date of filing of Application :30/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A METHOD OF FABRICATING A D‰COR

:B29C0065000000, (71)Name of Applicant : B29C0065480000, 1)TRESPA INTERNATIONAL B.V. (51) International classification B32B0017100000, Address of Applicant :Wetering 20 6002 SM Weert, The B29C0033380000, Netherlands Netherlands D21H0015020000 (72)Name of Inventor : (31) Priority Document No :2022381 1)K–MHOFF, Henricus Hubertus Maria

(32) Priority Date :11/01/2019 (33) Name of priority country :Netherlands (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a method of fabricating a dcor. The present method furthermore relates to a dcor and its use in a thermopressed panel. An object of the present invention is to provide a method of fabricating a dcor wherein the place of the dcor is in the interlayer boundary of the coatings of the dcor. Another object of the present invention is to provide a method of fabricating a panel having a flat outer surface provided with a dcor having an internal texture, the internal texture showing a visual 3D effect.

No. of Pages : 19 No. of Claims : 26

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27180

(12) PATENT APPLICATION PUBLICATION (21) Application No.202022008635 A (19) INDIA (22) Date of filing of Application :28/02/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN IMPROVED PROCESS FOR THE PREPARATION OF PYRROLE DERIVATIVES•

:C07D0403120000, (71)Name of Applicant : G06F0021560000, 1)CADILA HEALTHCARE LIMITED (51) International classification H04W0036220000, Address of Applicant :Zydus Corporate Park, Scheme No. 63, C07D0403140000, Survey No. 536, Khoraj (Gandhinagar), Nr. Vaishnodevi Circle, C07D0417060000 Sarkhej “ Gandhinagar Highway, Ahmedabad “ 382481, Gujarat, (31) Priority Document No :NA India Gujarat India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)DWIVEDI, Shri Prakash Dhar (86) International Application No :NA 2)SINGH, Ramesh Chandra Filing Date :NA 3)PATEL, Jagdish Maganlal (87) International Publication No : NA 4)PATEL, Vikas (61) Patent of Addition to Application Number :NA 5)TRIPATHI, Vishwadeepak Rama Pati Filing Date :NA 6)GANGWAR, Pranav Jitendra (62) Divisional to Application Number :2905/MUM/2013 7)RAVAL, Jigar Mukundbhai

Filed on :06/09/2013

(57) Abstract : The present invention relates to an improved process for the preparation of pyrroles derivatives having hypolipidemic and hypocholesteremic activities. In particular, the invention relates to an improved process for the preparation of 2-ethoxy-3-(4-(2-(2- methyl-5-(4-(methylthio)phenyl)-lH-pyrrol-l-yl)ethoxy) phenyl)propanoate and its pharmaceutically acceptable salts, hydrates, solvates, polymorphs or intermediates thereof. The invention also relates to an improved process for the preparation of mesylate compound (A1).

No. of Pages : 51 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27181

(12) PATENT APPLICATION PUBLICATION (21) Application No.202024000020 A (19) INDIA (22) Date of filing of Application :01/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMPOSITE MATERIAL WITH BONDING AGENT LAYER BASED ON SI, C AND O

:C23C0016400000, (71)Name of Applicant : B05D0001000000, 1)CARL FREUDENBERG KG (51) International classification C23C0016560000, Address of Applicant :Hhnerweg 2-4 69469 Weinheim, C23C0016020000, Germany Germany C23C0016300000 (72)Name of Inventor : (31) Priority Document No :19 151 316.7 1)FRAGSTEIN, Friederike von (32) Priority Date :11/01/2019 2)MARKSTEINER, Albin :EUROPEAN 3)CHRISTOPHER, Roman (33) Name of priority country UNION 4)RUTZ, Stephan (86) International Application No :NA 5)HALLSTEIN, Katharina Filing Date :NA 6)FELLER, Kai (87) International Publication No : NA 7)FETSCH, Yvonne (61) Patent of Addition to Application Number :NA 8)ADLER, Matthias Dr.

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a composite material, comprising a substrate and a polymer layer, attached to one another through a bonding agent layer, wherein the bonding agent layer is obtained through plasma-assisted chemical vapour deposition (PE-CVD), by using at least in part a mixture of precursor compounds comprising at least one unsaturated hydrocarbon and at least one organosilicon compound. The present invention also relates to a process for manufacturing such composite materials, sealing elements and applications.

No. of Pages : 44 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27182

(12) PATENT APPLICATION PUBLICATION (21) Application No.202024000833 A (19) INDIA (22) Date of filing of Application :08/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND APPARATUS FOR MONITORING PHYSICAL DOWNLINK CONTROL CHANNEL•

:H04W0052020000, (71)Name of Applicant : H04W0024000000, 1)SAMSUNG ELECTRONICS CO., LTD. (51) International classification H04B0010272000, Address of Applicant :129, Samsung-ro, Yeongtong-gu, G06F0001320900, Suwon-si, Gyeonggi-do, 16677, Republic of Korea Republic of H04W0028180000 Korea (31) Priority Document No :201910024436.7 (72)Name of Inventor : (32) Priority Date :10/01/2019 1)Min WU (33) Name of priority country :China 2)Feifei SUN (86) International Application No :NA 3)Jingxing FU Filing Date :NA 4)Bin YU (87) International Publication No : NA 5)Qi XIONG (61) Patent of Addition to Application 6)Chen QIAN :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Embodiments of the disclosure provides a method and an apparatus for power saving operation in a wireless communication system, wherein the method comprises: receiving configuration information for the power saving operation; monitoring a power saving signal based on the configuration information; and determining whether to monitor a PDCCH based on the power saving signal.

No. of Pages : 56 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27183

(12) PATENT APPLICATION PUBLICATION (21) Application No.202024001245 A (19) INDIA (22) Date of filing of Application :10/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : HEAT EXCHANGER AUTOMATIC ASSEMBLY APPARATUS AND METHOD

:F28D0001047000, (71)Name of Applicant : F28F0001320000, 1)Hanon Systems (51) International classification B23P0021000000, Address of Applicant :95, Sinilseo-ro, Daedeok-gu, Daejeon, B63B0039060000, 34325 Republic of Korea Republic of Korea F24F0013060000 2)JMT CO., LTD. (31) Priority Document No :10-2019-0004450 (72)Name of Inventor : (32) Priority Date :14/01/2019 1)PARK, Jong Eun (33) Name of priority country :Republic of Korea 2)JOO, Yong Hwan

(57) Abstract : Provided is a heat exchanger automatic assembly apparatus including: a fin distribution unit distributing fins; a fin transfer unit including two or more fin trays and a driving means connected to the fin trays, respectively, to selectively transfer the fin trays to a predetermined position; and a fin discharge unit discharging the fins stored in the fin trays of the fin transfer unit to the predetermined position. The fins may be continuously supplied to the fin trays without stopping the supply of the fins to the fin trays and the plurality of fins may be discharged at one time to allow the fins to be interposed between the tubes arranged to be spaced apart from each other, thereby reducing a supply time of the fin to improve productivity, and reducing discarded fins to reduce the manufacturing cost.

No. of Pages : 73 No. of Claims : 22

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27184

(12) PATENT APPLICATION PUBLICATION (21) Application No.201841026480 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : TYRE PRESSURE MONITORING AND REPLENISHING SYSTEM FOR PNEUMATIC TYRES

:B60C0023040000, (71)Name of Applicant : B60C0029020000, 1)TVS SRICHAKRA LTD. (51) International classification G01L0017000000, Address of Applicant :TVS Building, 7B West Veli Street, B60C0005120000, Madurai-625001, Tamil Nadu, India. Tamil Nadu India B60C0005220000 (72)Name of Inventor : (31) Priority Document No :NA 1)SANGAMESWARAN GOPALAKRISHNAN (32) Priority Date :NA 2)VISWANATHAN SIVARAMAKRISHNAN (33) Name of priority country :NA 3)ANNAMALAI LAKSHMANAN (86) International Application No :NA 4)MAYATHEVAR ARIVALAGAN Filing Date :NA 5)KADAMBANATHAN THIAGARAJAN

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to monitoring and maintenance of tyre pressure in a tubeless pneumatic tyre mounted on a road rim fitted to a vehicle. Further the present invention relates to a method of pressure monitoring and replenishing of a tubeless pneumatic tyre. The tyre pressure monitoring and replenishing system [100] for tubeless pneumatic tyres comprises an annular tubular container [3] fitted inside a tyre cavity [B] of a tubeless pneumatic tyre [4] and mounted on a tyre rim [2], a replenishment side valve [10] and a valve [1] with inlet [11] and two or more outlets [12, 13]. More advantageously, the present invention relates to positioning a pressurized container in the tyre cavity that through a special valve assesses and restores loss of pressure in tyre. Figure 1.

No. of Pages : 25 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27185

(12) PATENT APPLICATION PUBLICATION (21) Application No.201841034740 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : RETROFIT TRACKING SYSTEM

:G06N0003080000, (71)Name of Applicant : H04N0021218000, 1)Zen Technologies Limited (51) International classification G06T0001200000, Address of Applicant :Zen Technologies Limited B-42, G03B0015070000, Industrial Estate, Sanath Nagar, Hyderabad - 500018, Telangana, H02P0005680000 India. Telangana India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1) ATLURI. Kishore Dutt

(57) Abstract : 7. ABSTRACT The present invention is directed to a retrofit apparatus (100) adapted to fit to an object displacing system (102). The electronic retrofit apparatus (100) comprises of a high performance embedded system with a Graphics Processing Unit (GPU), a live image capturing device (104), a control unit to establish communication between the processing unit, and a plurality of motors (106) and the image capturing device (104), and a user interface to show a live image feed, a detected image feed and a tracked image feed of the object being selected. The high-performance embedded system with GPU receives the images captured by the live image capturing device (104), passes to a Deep Neural Network, wherein the system outputs multiple detected boxes for an object to be detected. The high performance embedded system enables the user to select a bounding box to be tracked, so that a tracker module of the embedded system tracks the selected object and sends command to the controller driving the motors (106), and to center the launcher on the selected object to induct. Figure associated with Abstract is Fig. 1

No. of Pages : 12 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27186

(12) PATENT APPLICATION PUBLICATION (21) Application No.201841042298 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PLATELET-RICH PLASMA BASED FORMULATIONS FOR TREATING WOUNDS AND A METHOD FOR PREPARATION THEREOF

:A61K0009000000, (71)Name of Applicant : A61K0035160000, 1)Indian Institute of Technology, Hyderabad (IITH) (51) International classification A61K0045060000, Address of Applicant :Indian Institute of Technology A61K0033240000, Hyderabad, Village-Kandi, Sangareddy “ Mandal, District - A61L0027360000 Medak Telangana India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)GIRI, Jyotsnendu

(57) Abstract : The present invention relates to platelet-rich plasma based formulations for treating and managing wounds and a method of preparing the same. More specifically, the invention relates to providing platelet-rich plasma based formulations for treating and managing wounds stable at different storage temperatures, especially at room temperature that can be used as such as off-the-shelf product or formulated into dosage forms for treating and managing wounds.

No. of Pages : 53 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27187

(12) PATENT APPLICATION PUBLICATION (21) Application No.201841047456 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SOLE FOR A SHOE AND A PROCESS OF MANUFACTURING THE SOLE

:F01D0005280000, (71)Name of Applicant : C22C0038020000, 1)TATA ADVANCED MATERIALS LIMITED (51) International classification C23C0016455000, Address of Applicant :10, Jigani Industrial Area, Jigani, B29C0065180000, Bengaluru, Karnataka 560105. Karnataka India F25B0049020000 (72)Name of Inventor : (31) Priority Document No :NA 1)Naresh Chandra Sharma (32) Priority Date :NA 2)Basavaraj Angadi

(57) Abstract : ABSTRACT A method of manufacturing a protective layer of a wearable is disclosed. A stack of layers made of composite material is subject to a compressive load ranging from about 5 to 20 bar at room temperature for a pre-set period of time. The stacked layers are then heated to a first pre-determined temperature range at a predetermined heating rate and gradually increasing the compressive load on the stacked layers to a load ranging from about 150 to 200 bar for a first pre-set time period. The temperature of the stacked layers is increased to a second pre-determined temperature range at a pre-determined heating rate at a constant load range for a second preset time period. Then, the stacked layers are cooled to a temperature range of about 60ºC to room temperature at a predetermined cooling rate. The protective layer processed by the method exhibit an improved penetration resistance.

No. of Pages : 17 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27188

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941000941 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : MARIJUANA DETECTOR

(71)Name of Applicant : 1)MANU JOSEPH :G01N Address of Applicant :Velliyamkulath House Vettukad Po (51) International classification 30/64 ,Pulinchuad, Thrissur Dist Pin: 680014. Kerala India (31) Priority Document No :NA 2)Achyuthanand K (32) Priority Date :NA 3)Gopika J Menon (33) Name of priority country :NA 4)Parvathy M (86) International Application No :NA 5)Ambily Francis Filing Date :NA 6)Dhanya Gangadharan (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)MANU JOSEPH Filing Date :NA 2)Achyuthanand K (62) Divisional to Application Number :NA 3)Gopika J Menon Filing Date :NA 4)Parvathy M

5)Ambily Francis 6)Dhanya Gangadharan

(57) Abstract : Abstract ii) Electronic Device The quantification part of the detector is a sophisticated electronic circuitry which analyses the specimen obtained. This circuitry can scale the content of THC in the analyte into predefined set of categories. These categories are determined through vigorous testing and intense calibration with Marijuana. Categories for quantification is calibrated with real specimen (Marijuana mixed with saliva) available. The aggregate of THC (in ppm) content in different scenario is tabulated according to the assumed intake of Marijuana by an individual. These tabulated result from the analyte is mapped to the amount of intake by the person. The detection is based on light refraction-absorption-reflection ratio, detection coefficient and reaction perimeter. The device works accordance with digital image processing technique. A IMX219 sensor with 2p lens is used as sensor which analyze the specimen (Marijuana mixed with saliva). The module will be frequently collecting data so that real-time image processing is possible. The data collected will be stored as stack of variations in reflected and absorbed values of light for processing. These stacks are mapped to the predefined categories. The circuitry consist of image processing IC and supporting components. This is a real-time process which can analyze the strip in 0.3 seconds so that we can test the as many suspects as possible. The result is displayed at 2.4 inch OLED display. Whole device is powered by appropriate battery. Since we need power at different rates for different components used, DC-DC converters are used. The circuitry consist of recharging circuitry for battery and protection circuit.

No. of Pages : 9 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27189

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941000952 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A RELEASE MECHANISM FOR USE IN CATHETERIZED DELIVERY OF CARDIOVASCULAR IMPLANTABLE DEVICE INSIDE THE BODY

:A61B0017000000, (71)Name of Applicant : A61F0002950000, 1)SREE CHITRA TIRUNAL INSTITUTE FOR MEDICAL (51) International classification A61B0017120000, SCIENCES AND TECHNOLOGY A61B0017040000, Address of Applicant :(AN INSTITUTE OF NATIONAL A61F0002966000 IMPORTANCE UNDER GOVT. OF INDIA), BIO MEDICAL (31) Priority Document No :NA TECHNOLOGY WING, POOJAPPURA, (32) Priority Date :NA TRIRUVANANTHAPURAM Kerala India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)SUJESH SREEDHARAN Filing Date :NA 2)JIJO JERARD

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a delivery system for the precise and easy deployment of cardiovascular devices such as an atrial septal defect (ASD) occluder device. The delivery system connects to the hub (107a) of the ASD device by means of a pronged end at its tip which has a spherical profile (101a) matching the cavity in the device hub to which it connects. The connection or engaging of the prongs (101) to the hub is by forward motion of a pusher rod (102) actuated by a turn-grip (105) using threaded mechanism, the turn grip (105) is at the proximal end of the handle (104) of the delivery system with respect to the user. There is a guard (106) provided to cover the turn-grip to prevent accidental release of the device (107). The spherical profile (101a) gives the device (107) a swinging freedom allowing it to swing about 22° to 30° from the central axis of the hub (107a); thereby reducing stresses on the device (107) and the septal wall during the deployment of the device (107). The device (107) is released on successful deployment by backward movement of pusher rod (102) with respect to prongs (101) by reverse motion of the turn grip (105) and the prongs (101) are dislodged from the device hub (107a) and the delivery system can be removed from the patient.

No. of Pages : 17 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27190

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941000967 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : HERBAL COMPOSITION OF NON-ALCOHOLIC BEVERAGE

:A61K0036906800, (71)Name of Applicant : A61K0036670000, 1)TAMILNADU STATE PALMGUR & FIBRE (51) International classification A61K0036230000, MARKETING CO OP FEDERATION A61K0036906200, Address of Applicant :NEW 32, GENGU REDDY RD, A61K0036540000 EGMORE, CHENNAI - 600008 TAMIL NADU Tamil Nadu (31) Priority Document No :NA India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)A. ANNA MALAI (86) International Application No :NA 2)A.SITHANATHAN Filing Date :NA 3)N.CHITRA (87) International Publication No : NA 4)G.MANI

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An improved herbal composition of non-alcoholic beverage which can be a caffeine replacement beverage. The herbal composition of non-alcoholic beverage comprises Zingiber officinale (dry), Coriandrum sativum seed powder, Palm Jaggery, Piper nigrum, Cuminum cyminum, Elettaria cardamomum, Piper longum, Syzygium aromaticum, Glycyrrhiza glabra, Cinnamomum verum, and Alpinia galangal. The herbal composition can be a replacement to caffeine and has increased advantages of health due to the herbal composition which increased refreshment and stress relief experience.

No. of Pages : 13 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27191

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941000970 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A METHOD AND APPARATUS FOR REMOTE FAULT-TIME EARTH RESISTANCE MONITORING

:H01M0010440000, (71)Name of Applicant : G11B0017049000, 1)SONJIB BANERJEE (51) International classification G03G0015080000, Address of Applicant :# 862, 9th main, 7th cross,Srinagar, A24D0003060000, Bengaluru,Karnataka, Karnataka India B65D0006220000 (72)Name of Inventor : (31) Priority Document No :NA 1)SONJIB BANERJEE

(32) Priority Date :NA (33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : NA

No. of Pages : 5 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27192

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001029 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SNAPPING, VIRTUAL INKING, AND ACCESSIBILITY IN AUGMENTED REALITY

:G06F0003010000, (71)Name of Applicant : G06T0019000000, 1)VMWARE, INC. (51) International classification H04N0007180000, Address of Applicant :3401 Hillview Avenue, Palo Alto, G06T0011000000, California USA U.S.A. G02B0027010000 (72)Name of Inventor : (31) Priority Document No :NA 1)SHUBHAM VERMA (32) Priority Date :NA 2)PRABHAKARA RAO NARNAKAJE VENUGOPALA (33) Name of priority country :NA 3)KANNAN BALASUBRAMANIAN

(57) Abstract : Embodiments of the present disclosure relate to providing an augmented reality experience. Embodiments include receiving, from an augmented reality or virtual reality (AR/VR) device, first input that identifies application content and a location of an artifact in an AR/VR environment. Embodiments include identifying a region in the environment based on the location, the region corresponding to the artifact. Embodiments include receiving the application content from an application. Embodiments include composing a first scene, the application content being overlaid onto the region. Embodiments include transporting the first scene to the AR/VR device for display. Embodiments include receiving, from the client device, second input in the region in the environment. Embodiments include composing a second scene wherein the application content is modified based on the second input. Embodiments include transporting the second scene to the AR/VR device for display.

No. of Pages : 42 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27193

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001044 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PREPARATION OF PURIFIED WITHANOSIDE X FROM WITHANIA SOMNIFERA PLANT MATERIALS AND ITS MEDICINAL USE FOR THE TREATMENT OF HEALTH DISORDERS

:A61K0009500000, (71)Name of Applicant : A61K0009200000, 1)ANTONY, Benny (51) International classification A61K0031165000, Address of Applicant :Kulangara Parecattil House, Kidangoor A23L0033105000, P.O., Angamaly “ 683572, Kerala State, India Kerala India A61K0036530000 (72)Name of Inventor : (31) Priority Document No :NA 1)ANTONY, Benny

(32) Priority Date :NA (33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention relates to a delivery system for Withaniasomnifera composition, the core is characterised by a solid beadand a layer of Withaniasomnifera extract covering said solid beadin a dosage form. It comprises of a corecharacterised by a solid bead made of any one or more compound selected from the group of Sugars, oligosaccharides, polysaccharides and their derivatives, a layer of Withaniasomnifera extract covering said solid bead, and a layer of protective system, so that it protects the Withaniasomnifera extract from acidic environment of gastric juice in a stomach.The dose form comprises 5% to 20% withanolide glycoside by weight while Withaniasomnifera extract is standardised with 2% to 35% withanolide glycoside by weight. Method of preparing Withaniasomnifera extract as well as methodof preparation of dosage form of Withaniasomnifera composition is disclosed here. WithaniasomniferaComposition is effective in reducing stress, anxiety, depression, and sleep deprivation.

No. of Pages : 46 No. of Claims : 25

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27194

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001092 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A SYSTEM FOR AVOIDING FOOD WASTAGE

:A61B0005000000, (71)Name of Applicant : H01M0010052500, 1)SRM INSTITUTE OF SCIENCE AND TECHNOLOGY (51) International classification G06F0003043000, Address of Applicant :Kattankulathur, Chennai-603203, Tamil H01M0010420000, Nadu, India Tamil Nadu India G01J0001440000 (72)Name of Inventor : (31) Priority Document No :NA 1)K. A. Sunitha (32) Priority Date :NA 2)T Swati Shivani (33) Name of priority country :NA 3)Y Prashant

(57) Abstract : The present disclosure envisages a system (100) for avoiding food wastage. The system (100) includes at least one sensor (20), a signal conditioning unit (30), a repository (40), a computing module (50), and a communication unit (60). The at least one sensor (20) is configured to sense at least one parameter with respect to food and is further configured to generate at least one sensed signal. The signal conditioning unit (30) is configured to receive the sensed signal and convert the sensed signal into a value. The repository (40) is configured to store a pre-determined value with respect to capacity of at least one food packet and communication details of at least one distribution unit. The communication unit 60 is configured to transmit the number of food packets and the communication details. The system (100) avoids food wastage.

No. of Pages : 16 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27195

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001093 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN OBSTACLE DETECTION AND ALERT SYSTEM

:B60Q0009000000, (71)Name of Applicant : G08B0021180000, 1)SRM INSTITUTE OF SCIENCE AND TECHNOLOGY (51) International classification G08G0001160000, Address of Applicant :Kattankulathur, Chennai-603203, Tamil G08B0019000000, Nadu, India Tamil Nadu India B60W0030080000 (72)Name of Inventor : (31) Priority Document No :NA 1)KARNAM, SUNITHA ANANTHA (32) Priority Date :NA 2)SRIVASTAVA, SHIVAM

(57) Abstract : The present disclosure envisages an obstacle detection and alert system (100) for a vehicle. The system (100) includes an IR transmitter (102), an IR receiver (104), a signal conditioning unit (106), a repository (108), a controller (110) and an alarm (112). The IR transmitter (102) and the IR receiver (104) are configured to transmit a beam of infrared light and receive the transmitted beam of infrared light that reflects from the surface of the obstacle (101) to generate an analog signal. The signal conditioning unit (106) is configured to receive said analog signal and is further configured to convert said analog signal into digital signal. The repository (108) is configured to store a pre-determined value of a signal. The controller (110) is configured to generate a control signal. The alarm (112) is configured to alert the driver regarding the obstacle (101).

No. of Pages : 18 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27196

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001135 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : NATURAL SOLUTION LANGUAGE

:G01N0033533000, (71)Name of Applicant : H05B0031000000, 1)FRACTAL COGNITIVES PTE. LTD. (51) International classification B01J0020286000, Address of Applicant :1 Raffles Place, Tower 2, #19-61, One C02F0003280000, Raffles Place, Singapore, Pin Code-048 616. Singapore B63C0007260000 (72)Name of Inventor : (31) Priority Document No :NA 1)BYRRAJU, Ramalinga Raju

(32) Priority Date :NA (33) Name of priority country :NA (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : As Attached

No. of Pages : 30 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27197

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001142 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A PROCESS TO MANUFACTURE A TANDEM HYDRAULIC PUMP

:F04C0002180000, (71)Name of Applicant : F16D0023060000, 1)MIVIN Engg. Technologies (P) Ltd (51) International classification F04C0011000000, Address of Applicant :Survey No.81 & 82/1 Hejjala village B62D0001100000, Bidadi Hobli Bangalore (Hejjala) 562 109. Karnataka India A47J0043100000 2)Robert Bosch GmbH (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Bhaskar Nagesh Naik (33) Name of priority country :NA 2)Srikantha Handralu Shivakumar

(57) Abstract : The invention discloses a process to manufacture a tandem hydraulic pump 100. The pump comprises a housing 102, a first pump 104 driven by a first drive gear 110, a second pump 106 driven by a second dive gear 112.The first drive gear 110 has internal splines 200 at one end. The second drive gear 112 has internal gears 201 at one end. The first and second drive gears are connectable by a connecting sleeve 108 having external gears 202 to match said internal gears 200, 201 of said first drive gear and said second drive gear. The process is characterized in that the internal splines 200, 201 and the said external splines 202 on the coupling sleeve 108 are manufactured by cold forging.

No. of Pages : 11 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27198

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001143 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A METHOD OF IDENTIFYING A FAULTY INJECTOR FROM A PLURALITY OF INJECTORS.

:F02D0041400000, (71)Name of Applicant : F02D0019080000, 1)Bosch Limited (51) International classification F02D0041240000, Address of Applicant :Post Box No 3000, Hosur Road, F02D0035020000, Adugodi, Bangalore “ 560030, Karnataka, India Karnataka India F16H0059440000 2)Robert Bosch GmbH (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Karthik Gandiban (33) Name of priority country :NA 2)George Anthony Prakash

(57) Abstract : Disclosed herein is a method of identifying a faulty injector from a plurality of injectors. The method comprises detecting 100 by a control unit a first pressure gradient of fuel in each of plurality of injectors after run time of the vehicle. The control unit detects 102 a second pressure gradient for an injected quantity of fuel during run time of the vehicle. The control unit compares 104 the first and second pressure gradient with respect to a data map. The data map contains values of first pressure gradient and second pressure gradient with respect to injected quantity of fuel. The control unit checks 106 if the second pressure gradient exceeds a threshold as defined in a data map for the injected quantity when first pressure gradient exceeds a threshold limit as defined in the data map.

No. of Pages : 8 No. of Claims : 2

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27199

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001145 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEMS AND METHODS FOR MANAGING COMMUNICATION BETWEEN NVME-SSD STORAGE DEVICE(S) AND NVME-OF HOST UNIT

:G06F0003060000, (71)Name of Applicant : G06F0011100000, 1)SAMSUNG ELECTRONICS CO., LTD. (51) International classification G06F0013400000, Address of Applicant :129, Samsung-ro, Yeongtong-gu, G06K0019070000, Suwon-si, Gyeonggi-do 443-742, Republic of Korea. Republic of H02J0007340000 Korea (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Venkataratnam Nimmagadda (33) Name of priority country :NA 2)Anil Desmal Solanki

(57) Abstract : Embodiments herein discloses a systems and methods for managing communication between a Non Volatile Memory express-over Fabric (NVMe-oF) host unit and a plurality of Non Volatile Memory express-Solid State Drive (NVMe-SSD) storage devices via a bridge unit. Embodiments herein relates to the field of storage devices and more particularly to systems and methods for managing communication between the NVMe-oF host unit and the plurality of the NVMe-SSD storage devices via the bridge unit. The bridge unit may include sub-modules to perform the controlling operation of command and data. The bridge unit may generate virtual data memory address corresponding to a Scattered Gathered List address. The bridge unit may not require data buffer to store intermediate data. The system may be configured to initiate, a memory WRITE/READ transaction, to access a virtual data memory for performing action such as data WRITE/READ operation by the NVMe-SSD storage device. FIG. 2a.

No. of Pages : 51 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27200

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001150 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DNS CACHE PROTECTION

:H04L0029120000, (71)Name of Applicant : H04L0029060000, 1)VMWARE, INC. (51) International classification H04L0029080000, Address of Applicant :3401 Hillview Avenue, Palo Alto, G06F0009455000, California USA U.S.A. G06F0011070000 (72)Name of Inventor : (31) Priority Document No :NA 1)NAKUL OGALE (32) Priority Date :NA 2)NILESH AWATE

(57) Abstract : Some embodiments provide a method for detecting that a domain name service (DNS) cache on a data compute node (DCN) has been attacked. The method, during a first operational phase of an agent executing on the DCN, builds a DNS cache that stores entries that include (i) network address to domain name mappings and (ii) policies for the entries received from a centralized service. During a second operational phase of the agent, the method detects that an entry of the DNS cache has been modified by a DNS response such that the modified entry violates the policy for the entry. Based on the detection, the method sends an alert to the centralized service. The centralized service performs additional analysis on the modification to determine whether to allow the DCN to use the modified DNS cache entry.

No. of Pages : 29 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27201

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001171 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : CONTEXTUAL AWARENESS WITH INTERNET OF THINGS (IOT) INFRASTRUCTURE FOR MANAGED DEVICES

:H04L0029080000, (71)Name of Applicant : H04W0004700000, 1)VMWARE, INC. (51) International classification H04L0029060000, Address of Applicant :3401 Hillview Avenue, Palo Alto, H04W0004080000, California USA U.S.A. H04W0012080000 (72)Name of Inventor : (31) Priority Document No :NA 1)SWARNADEEP BANERJEE (32) Priority Date :NA 2)ARVIND MAAN (33) Name of priority country :NA 3)ASHISH MAAN (86) International Application No :NA 4)NITIN SETHI

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Disclosed are various examples for providing contextual awareness with an internet of things (IoT) infrastructure in an enterprise workspace. IoT devices can connect to a network through a gateway or other edge device enrolled in a management service. The gateway device can provide context-based services defined by the management services to users in an enterprise through interactions with IoT devices. A gateway device can identify managed user devices within a service range of the gateway device. When a managed user device is within the service range of the gateway device, the gateway device can provide a context-based service by interacting with connected IoT devices.

No. of Pages : 41 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27202

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001190 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PREPARATIVE CRYSTALLIZATION OF RECOMBINANT HUMAN INSULIN

:C07K0014620000, (71)Name of Applicant : A61K0038280000, 1)BIOCON LIMITED (51) International classification C07K0001300000, Address of Applicant :20th KM, Hosur Road, Electronic City, B01D0061360000, Bangalore Karnataka India G06K0009000000 (72)Name of Inventor : (31) Priority Document No :NA 1)SANKARAN, Sethumadhavan (32) Priority Date :NA 2)KAMATH, Sandeep, Vishwanath (33) Name of priority country :NA 3)SHABANDRI, Qais (86) International Application No :NA 4)SHUKLA, Vibhava Filing Date :NA 5)MARIMUTHU, Arul (87) International Publication No : NA 6)SAIKIA, Ankita (61) Patent of Addition to Application Number :NA 7)KANDUKURI, Sai, Srikar

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention discloses a method for crystallizing recombinant Human Insulin at lab and manufacturing scale in the presence of zinc chloride and sodium chloride mixture, higher concentration of organic solvent (IPA-19 to 25 million) and adjusting the pH to 5.0 at a faster rate(=5 minutes) .The method further comprises adopting procedures wherein the settling time is reduced and the holding temperature is altered in order to facilitate consistent protein crystal formation between 15µm -30µm and to increase the robustness of the process.

No. of Pages : 54 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27203

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001199 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AGENTS INSTALLATION IN DATA CENTERS BASED ON HOST COMPUTING SYSTEMS LOAD

:H04L0029080000, (71)Name of Applicant : H05K0007200000, 1)VMWARE, INC. (51) International classification G06F0009500000, Address of Applicant :3401 Hillview Avenue, Palo Alto, G06F0011300000, California U.S.A. G06F0001200000 (72)Name of Inventor : (31) Priority Document No :NA 1)V VIMAL DAS KAMMATH (32) Priority Date :NA 2)ZAC GEORGE (33) Name of priority country :NA 3)ADITYA SUSHILENDRA KOLHAR (86) International Application No :NA 4)RAHAV VEMBULI Filing Date :NA 5)ADITYA KOLHAR

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Techniques for installing agents on host computing systems in data centers are disclosed. In one example, load information and resource capability associated with a host computing system in a data center may be determined. Further, a maximum number of concurrent installations to be performed on the host computing system may be determined based on the load information and the resource capability. Furthermore, a channel with the maximum number of concurrent installations may be configured for the host computing system and agents may be installed on the host computing system based on the configured channel. [Figure 1A]

No. of Pages : 38 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27204

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001215 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SNAPSHOT USAGE TRACKING SYSTEM AND METHOD

:G06F0011140000, (71)Name of Applicant : G06F0016110000, 1)DRUVA INC (51) International classification G06F0003060000, Address of Applicant :800 West California Avenue, Ste. 100, G06F0011300000, Sunnyvale, CA 94086, U.S.A. U.S.A. G06F0016210000 (72)Name of Inventor : (31) Priority Document No :NA 1)Milind Vithal Borate (32) Priority Date :NA 2)Somesh Jain

(57) Abstract : A snapshot usage tracking system and method for a versioned storage is provided. The system includes a memory having computer- readable instructions stored therein and a snapshot repository configured to store a plurality of snapshots of a versioned storage. Each of the plurality of snapshots includes one or more data blocks. The system further includes a processor communicatively coupled to the snapshot repository and configured to maintain a set of snapshot counters corresponding to each of previous snapshots created on or before a current snapshot based upon a size of the data blocks that are modified or deleted in the current snapshot.

No. of Pages : 32 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27205

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001216 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : ONLINE PLATFORM TO SHARE BOOKS AND METHOD TO OPERATE THE SAME

:G06Q0010100000, (71)Name of Applicant : A61B0008080000, 1)Krishna Kanivehalli Shroff (51) International classification G06Q0030080000, Address of Applicant :4023, Prestige SouthRidge, G06Q0050000000, Banashankari 3rd Stage, Bangalore Karnataka India G06Q0030020000 (72)Name of Inventor : (31) Priority Document No :NA 1)Krishna Kanivehalli Shroff (32) Priority Date :NA 2)Aditi Krishna Shroff

(57) Abstract : An online platform to share a plurality of books is provided. The online platform includes a registration module configured to register a first user upon receiving one or more first user details. The online platform is also configured to register a second user upon receiving one or more second user details. The online platform is also including a book receiving module is configured to receive the plurality of books by the first user. The online platform is also including a book storage module is configured to store the plurality of books in a book database. The online platform also includes an online catalogue module is configured to create an online catalogue based on at least one of the plurality of books and the plurality of author details. The online platform also includes a book acquisition module is configured to select the plurality of books from the online catalogue. FIG. 1

No. of Pages : 22 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27206

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001230 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SOLID DISPERSION OF LAROTRECTINIB SULFATE

:A61K0009140000, (71)Name of Applicant : A61K0009160000, 1)Mylan Laboratories Ltd (51) International classification H01B0001060000, Address of Applicant :Mylan Laboratories Ltd, Plot No D06M0015030000, 564/A/22, Road No 92, Jubilee Hills, Hyderabad, Telangana, H01M0008101600 India, Pin Code“500 033. Telangana India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Ramakoteswara rao Jetti (33) Name of priority country :NA 2)Narasimhamurty Pilli (86) International Application No :NA 3)Daveedu Bhatraju, Filing Date :NA 4)Sureshbabu Jayachandra

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention provides a solid dispersion of amorphous Larotrectinib sulfate and process for the preparation of the same.

No. of Pages : 18 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27207

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001273 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : LURASIDONE PHARMACEUTICAL COMPOSITIONS

:A61K0009140000, (71)Name of Applicant : A61K0009160000, 1)Slayback Pharma LLC (51) International classification A61K0047380000, Address of Applicant :Slayback Pharma LLC, 301 Carnegie A61K0031496000, Center, Suite 303, Princeton, NJ, USA. U.S.A. A61K0009200000 (72)Name of Inventor : (31) Priority Document No :NA 1)Jain Paras P (32) Priority Date :NA 2)Ajay Kumar Singh (33) Name of priority country :NA 3)Praveen Kumar Subbappa (86) International Application No :NA 4)Srinivasa Reddy Madduri Filing Date :NA 5)Keerthi Priya (87) International Publication No : NA 6)Girish Kumar Jain

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Solid dispersions of lurasidone or a pharmaceutically acceptable salt thereof are described, as well as pharmaceutical formulations thereof, and methods for making such formulations. Preferably, the solid dispersions are prepared by hot-melt extrusion or spray- drying, and comprise lurasidone with a pharmaceutically acceptable carrier (e.g., hydroxypropyl methyl cellulose acetate succinate (HPMC-AS), polyvinyl pyrrolidine vinyl acetate (PVP/VA) copolymer, hydroxypropyl methylcellulose phthalate (HPMCP), or mixtures thereof). The pharmaceutical composition may be orally administered to a patient in either the fed or fasted state, with a decrease or elimination of the food effect. Preferably, following oral administration of the pharmaceutical compositions, there is no substantial difference in the pharmacokinetic parameters (e.g., Tmax, Cmax, AUC0-t and/or AUC0-infinity) of lurasidone, regardless of whether the pharmaceutical compositions are administered to a subject in the fed or fasted state.

No. of Pages : 60 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27208

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001306 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AMINO ACID ENRICHED TUNABLE BIOINK FORMULATION FOR MULTIDIMENSIOAL BIOPRINTING AND THE PROCESS THEREOF

:A61K0008440000, (71)Name of Applicant : A61K0038010000, 1)SREE CHITRA TIRUNAL INSTITUTE FOR MEDICAL (51) International classification H04N0001600000, SCIENCES AND TECHNOLOGY A61K0047420000, Address of Applicant :(An Institute of National Importance A23L0029281000 under Govt. of India), Biomedical Technology Wing Poojappura, (31) Priority Document No :NA Thiruvananthapuram “ 695012, Kerala, India Kerala India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)ROY JOSEPH (86) International Application No :NA 2)PRAVEEN KUNJAN SOBHAN

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A 3D bioprintable ink formulation capable of multidimensional printing comprises gelatin modified by an essential amino acid arginine, oxidized alginate and a catalyst.

No. of Pages : 17 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27209

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001363 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR REDUCING PULMONARY FLOW

:A61F0002900000, (71)Name of Applicant : A61F0002958000, 1)DR VARUN SHETTY (51) International classification A61F0002915000, Address of Applicant :#393, 13th Main 2nd Cross, 3rd Block D03D0015000000, Kormangala, BANGALORE KARNATAKA, INDIA Karnataka A61F0002070000 India (31) Priority Document No :NA 2)DR DEVIPRASAD SHETTY (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)DR VARUN SHETTY (86) International Application No :NA 2)DR DEVIPRASAD SHETTY

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method and system discloses a medical device (100) comprising a pre-crimped stent (102) mounted on an inflatable means for inflating the pre-crimped stent (102). The pre-crimped stent (102) mounted on an inflatable means further includes a membrane (104) with a centrally positioned opening (106) with a second expandable diameter, wherein the membrane (104) covers one end of the pre- crimped stent, thereby reducing pulmonary flow in a pulmonary artery.

No. of Pages : 14 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27210

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001386 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : WATER SOLUBLE MINERAL FERULATES: PREPARATION AND THERAPEUTIC USE

:A61K0033060000, (71)Name of Applicant : A23L0033100000, 1)Muhammed Majeed (51) International classification A61K0008190000, Address of Applicant :l9/l & 19/2, 1st Main, 2nd Phase, C12P0007240000, Peenya Industrial Area, Bangalore - 560058. Karnataka India A23L0002520000 2)Kalyanam Nagabhushanam (31) Priority Document No :NA 3)Samuel Manoharan Thomas (32) Priority Date :NA 4)Lakshmi Mundkur (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)Muhammed Majeed Filing Date :NA 2)Kalyanam Nagabhushanam (87) International Publication No : NA 3)Samuel Manoharan Thomas (61) Patent of Addition to Application 4)Lakshmi Mundkur :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT The present invention discloses novel water-soluble mineral ferulates and mineral dihydroferulates, for use as a mineral and ferulic acid supplement. More specifically, the invention discloses a composition comprising water soluble calcium ferulate dihydrate or magnesium ferulate or calcium/magnesium dihydroferulate for use as a calcium/magnesium and ferulic acid / dihydroferulic acid supplement and the method of their preparation.

No. of Pages : 22 No. of Claims : 14

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27211

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001395 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : INTELLIGENT BRAKE BLEEDING MACHINE

:B60T0017220000, (71)Name of Applicant : B60T0017040000, 1)Brakes India Private Limited (51) International classification F15B0021044000, Address of Applicant :MTH Road, Padi, Chennai, Tamil B60T0017020000, Nadu, India, Pin Code-600 050. Tamil Nadu India E03D0005100000 (72)Name of Inventor : (31) Priority Document No :NA 1)BHASKAR BANDYOPADHYAY

(57) Abstract : Intelligent brake bleeding machine comprising of a DC Motor (1), a Vacuum Pump (2), a Sensor Vacuum & Air Flow (3), a Vacuum Tank (4), a Fluid Tank (5), a Solenoid Valve (6), another Solenoid Valve (7), a Sensor IR (8), a Sensor Ultrasonic and Opto (9) and a Micro controller (10), Silicone Tube to detect the air bubbles in the brake fluid and to understand the air bleeding completion of the hydraulic brake and clutch circuits of automobile or like vehicles. Figure for publication: Figure 1

No. of Pages : 18 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27212

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001416 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A METHOD AND APPARATUS FOR FASTER AND REPRODUCIBLE PATINATION PROCESS FOR ALLOYS USED IN BIDRIWARE

:C23C0022630000, (71)Name of Applicant : G01N0001280000, 1)INDIAN INSTITUTE OF TECHNOLOGY MADRAS (51) International classification G01N0035080000, (IIT MADRAS) C04B0040000000, Address of Applicant :The Dean Intellectual Property C01G0051000000 Management Cell Centre for Industrial Consultancy & Sponsored (31) Priority Document No :NA Research (ICSR) Indian Institute of Technology Madras, IIT (32) Priority Date :NA Madras, Chennai 600 036. INDIA Tamil Nadu India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)Lakshman Neelakantan Filing Date :NA 2)Manas Mukherjee (87) International Publication No : NA 3)Arulkumar Ganapathi

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A METHOD AND APPARATUS FOR FASTER AND REPRODUCIBLE PATINATION PROCESS FOR ALLOYS USED IN BIDRIWARE An alternative chemical method for faster and reproducible patination process for the alloys used in Bidriware, wherein; a chemical mixture containing NH4Cl and alkali nitrates (K/Na/Ca-nitrates) in a certain ratio dissolved in water. The chemical solution is then heated to and maintained at a specific temperature. The patination solution is thoroughly mixed using a stirrer. Subsequently, the specimen can be immersed into the patination solution for a stipulated time. Immersion time varies depending on the concentration of alkali nitrates and patination solution temperature; and an apparatus which can be used for automation of the patination process. Most illustrative figure: Fig.1

No. of Pages : 14 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27213

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001442 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : RAPID RAMAN DETECTION OF VIABILITY OF A MICROORGANISM

:G01N0021650000, (71)Name of Applicant : G01J0003440000, 1)Indian Institute of Science (51) International classification C12Q0001040000, Address of Applicant :Bangalore,Karnataka India-560 012 G01J0003020000, Karnataka India G01N0001340000 (72)Name of Inventor : (31) Priority Document No :NA 1)Prof. Siva Umapathy (32) Priority Date :NA 2)Prof. Deepak Kumar Saini (33) Name of priority country :NA 3)Ms. Srividya Kumar (86) International Application No :NA 4)Renu Gopinathan Filing Date :NA 5)Goutam Kumar Chandra

(87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention provides a method for rapid detection of the viability of microorganisms. The method includes preparing a sample, irradiating the prepared sample with an electromagnetic radiation of specific wavelength, capturing the electromagnetic radiation scattered by the sample to obtain Raman spectra and analyzing the Raman spectra. The analysis of the Raman spectra obtained identifies viability of the microorganism. The method allows viability detection in a time period of about an hour subsequent to preparatory phase. FIG.1

No. of Pages : 27 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27214

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001463 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : ALLOCATION OF VEHICLES TO PASSENGERS USING ROUTE PREFERENCES

:G01C0021340000, (71)Name of Applicant : G06Q0010020000, 1)ANI TECHNOLOGIES PRIVATE LIMITED (51) International classification G06Q0030020000, Address of Applicant :Regent Insignia, #414, 3rd Floor, 4th H04W0012080000, Block, 17th Main, 100 Feet Road, Koramangala, Bengaluru, G06Q0050140000 Karnataka-560034 Karnataka India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Moiaz Jiwani (33) Name of priority country :NA 2)Azimul Mannan

(57) Abstract : Allocation of a vehicle to a passenger includes receiving a booking request for a share-ride or a non-share ride. Based on the booking request, sets of sponsored and non-sponsored routes are identified. Each identified route connects at least a source location and a destination location associated with the booking request. Further, one or more sponsored routes are selected from the set of sponsored routes based on a persona of the passenger. A sposnored or non-sposnored route is selected, by the passenger, from the one or more sponsored routes or the set of non-sponsored routes, respectively. Based on the selection by the passenger, an available vehicle is allocated to the passenger for the ride. Similarly, at least sponsored routes are identified and presented to a driver of the allocated vehicle for travelling from a current location to the source location of the passenger.

No. of Pages : 55 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27215

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001474 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR ENABLING OF CROSS LINK INTERFERENCE MEASUREMENT IN NEW RADIO

:H04W0072040000, (71)Name of Applicant : H04W0074040000, 1)Centre of Excellence in Wireless Technology (51) International classification H04W0056000000, Address of Applicant :Centre of Excellence in Wireless H04W0024080000, Technology,3rd Floor, IITM Research Park, Kanagam Road, H04B0017345000 Taramani, Chennai, Tamil Nadu, India600 113 Tamil Nadu India (31) Priority Document No :NA 2)Indian Institute of Technology Madras (IIT Madras) (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)Jeniston Deviraj Klutto Milleth (86) International Application No :NA 2)Bhaskar Ramamurthi Filing Date :NA 3)Abhijeet Abhimanyu Masal (87) International Publication No : NA 4)Priyanka Dey (61) Patent of Addition to Application 5)Sunil Kaimalettu :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT Method and system for enabling of cross-link interference measurement using CLI-RS resource in wireless network The method includes configuring a first CLI-RS configuration at a first UE (200a). Further, the method includes configuring a second CLI- RS configuration at a second UE (200b). Further, the method includes generating a CLI-RS sequence using a common CLI-RS reference point known to the first UE (200a) and the second UE (200b). Further, the method includes filling the CLI-RS sequence in the first set of CLI-RS resources indicated in the first CLI-RS configuration. Further, the method includes transmitting the CLI-RS sequence filled in the first set of CLI-RS resources indicated in the first CLI-RS configuration to the second UE (200b). Further, the method includes receiving the CLI-RS sequence transmitted by the first UE (200a). Further, the method includes processing the received CLI-RS sequence based on the second CLI-RS configuration. FIG. 4A

No. of Pages : 53 No. of Claims : 24

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27216

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001481 A (19) INDIA (22) Date of filing of Application :12/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : INTEGRATED ELECTROMAGNETIC AND OPTICAL DEVICE FOR WIRELESS TRANSFER OF POWER AND DATA COMMUNICATION

:H01L0033480000, (71)Name of Applicant : A44B0011250000, 1)AUTOLIV DEVELOPMENT AB (51) International classification H02J0050300000, Address of Applicant :SE-447, WALLENTINSV„GEN 22, 83 H01F0038140000, V…RG…RDA, Sweden G06K0007100000 (72)Name of Inventor : (31) Priority Document No :NA 1)ABHIJEET ARJUN ATWADKAR (32) Priority Date :NA 2)ATHEET BASAVARAJU RAJ (33) Name of priority country :NA 3)ASHWIN BALARAM BALASUNDAR (86) International Application No :NA 4)RAMESH DAMODARAN Filing Date :NA 5)SUBA ANANTHAN THANGAVEL

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An integrated electromagnetic and optical device for a wireless transfer of power and transmission of data, with a light emitter 111, a light receiver 112 and a magnetic flux directing member 108 are disposed on a base member 101. An electromagnetic inductive interface 107 is coupled to a magnetic flux amplifier 106 and disposed within the magnetic flux directing member 108. A sealing member 115 with optical apertures 116, 117 to expose the light emitter 111 and the light receiver 112 and to form a sealing enclosure. A pair of integrated electromagnetic and optical devices 200a, 200b are disposed to be coupled electromagnetically and optically and to be configured for a wireless transfer of power and transmission of data between them. An occupant restraint system 300 for an automotive vehicle with a buckle assembly and a tongue assembly for a wireless transfer of transfer of power and transmission of data.

No. of Pages : 66 No. of Claims : 19

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27217

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001489 A (19) INDIA (22) Date of filing of Application :12/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A PROCESS FOR THE PREPARATION OF 4-HYDROXYBENZOTHIOAMIDE

:C07D0277560000, (71)Name of Applicant : A61K0031426000, 1)Vasudha Pharma Chem Limited (51) International classification H04L0029060000, Address of Applicant :78/A, Vengalrao Nagar, Hyderabad, H01L0031021600, Telangana, India, Pin Code-500 038. Telangana India A61K0031353000 (72)Name of Inventor : (31) Priority Document No :NA 1)MANTENA VENKATA RAMA RAJU (32) Priority Date :NA 2)MANTENA ASHOK SRINIVASA RAJU (33) Name of priority country :NA 3)MANTENA ANAND (86) International Application No :NA 4)RAGHURAM SURAPARAJU Filing Date :NA 5)SEENI SESHAGIRI RAO (87) International Publication No : NA 6)RAJASEKHARA RAO BUDDHALA (61) Patent of Addition to Application Number :NA 7)HANUMANTH RAO MACHARLA

Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present application disclosed a process for the preparation of 4-hydroxybenzothioamide an intermediate of Febuxostat.

No. of Pages : 18 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27218

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001490 A (19) INDIA (22) Date of filing of Application :12/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : RHINOCEROS BEETLE TRAP FOR COCONUT TREE AND DATE PALM

:A61K0036889000, (71)Name of Applicant : A23N0005030000, 1)Sebastian P. Augustine (51) International classification H01L0029080000, Address of Applicant :Palamattam House, Beemanady PO, H04L0009000000, Nileshwar via, Kasaragod DT, Kerala, India, Pin Code-671 314. A61K0036680000 Kerala India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Sebastian P. Augustine

(57) Abstract : The invention is related to the prevention and elimination of attack of Rhinoceros beetles, which attacks and decays coconut tree and date palm. Their attack is a common issue, which affects mostly during the younger and lower growth stages of coconut tree and date palm. The attacks of beetles have created heavy damage to farmers. A permanent solution to trap and eliminate the Rhinoceros beetle has been developed by creating a trap with nylon net and stapler pins.

No. of Pages : 2 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27219

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001532 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : IMPROVED PROCESSES FOR THE PREPARATION OF INTERMEDIATES OF TICAGRELOR

:C07D0487040000, (71)Name of Applicant : C07K0005060000, 1)Dr. Reddy™s Laboratories Limited (51) International classification C07D0239600000, Address of Applicant :8-2-337, Road No. 3, Banjara Hills, A61K0031519000, Hyderabad, Telangana, India, Pin Code-500 034. Telangana India C07H0015040000 (72)Name of Inventor : (31) Priority Document No :NA 1)Dr. Rakeshwar Bandichhor (32) Priority Date :NA 2)Sasi Kala Venkata Annapurna Cheemalapati (33) Name of priority country :NA 3)Vijaya Kumar Adla (86) International Application No :NA 4)Vishnu Vardhana Vema Reddy Eda Filing Date :NA 5)Dr. Rajeev Rehani Budhdev (87) International Publication No : NA 6)Dr. Srinivas Oruganti

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present application relates to improved processes for the preparation of intermediates of Ticagrelor.

No. of Pages : 23 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27220

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001611 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR TRAINING A QUESTION AND ANSWER ENGINE

:B63C0009030000, (71)Name of Applicant : B23K0009038000, 1)ACCENTURE GLOBAL SOLUTIONS LIMITED (51) International classification A23G0003540000, Address of Applicant :3 Grand Canal Plaza, Grand Canal B65G0015080000, Street Upper, Dublin 4, Ireland Ireland G01V0001280000 (72)Name of Inventor : (31) Priority Document No :NA 1)Rajagopal, Vidya (32) Priority Date :NA 2)Grace Mercylawrence, Marin (33) Name of priority country :NA 3)Mengi, Gaurav

(57) Abstract : ENCLOSED

No. of Pages : 41 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27221

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001648 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A METHOD AND A SYSTEM FOR REPORTING MANIPULATION OF RADIO RESOURCE CONTROL-RRC SIGNALLING MESSAGE

:H04L0029060000, (71)Name of Applicant : H04W0012060000, 1)Samsung Electronics Co., Ltd. (51) International classification H04W0076180000, Address of Applicant :129, Samsung-ro, Yeongtong-gu, H04W0004700000, Suwon-si, Gyeonggi-do, 443-742, Republic of Korea Republic of H04L0009060000 Korea (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)RAJADURAI, Rajavelsamy (33) Name of priority country :NA 2)INGALE, Mangesh Abhimanyu (86) International Application No :NA 3)TANGUDU, Narendranath Durga

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The method comprises sending, by a UE, a request-message for resuming RRC connection to a base station, wherein the request message comprises a first-parameter defining resume cause•. A response pertaining to at least one of network-release or network- resumption is received by the UE, wherein the response comprises a second parameter defining resume cause•. Based on a successful-mapping between the first parameter and the second parameter, the response is acknowledged by the UE. However, for example, in case of network-rejection of the request due to network congestion, an RRC reject message comprising a first message authentication code is computed by the base station based on a stored network security context and communicated to the UE. Thereafter, a second message authentication code is mapped by the UE with the first message authentication code. Based on a successful mapping, the RRC reject message is acknowledged by the UE

No. of Pages : 64 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27222

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001659 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN ADVANCE E-MAIL MANAGEMENT SYSTEM AND METHOD THEREOF

:G06Q0010100000, (71)Name of Applicant : H04N0001320000, 1)BHARAT ELECTRONICS LIMITED (51) International classification B41J0003010000, Address of Applicant :Corporate Office, Outer Ring Road, B41K0003480000, Nagavara, Bangalore, Karnataka, India, Pin Code-560 045. G06K0001120000 Karnataka India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Alka Maurya

(57) Abstract : An advance email management system and method thereof to control the number of copies of emails that can be printed by limiting the number of copies of the email messages in the network after the e-mail delivery and before it goes to a printing device for prints, wherein the email messages are stamped as original when printed for the first time and thereafter will be stamped as duplicate for further copies of prints of emails being taken, and wherein all email messages have a unique bar code which is printed on all the pages of the printed email copies, and wherein all the data related to each e-mail message can be retrieved by inputting the associated barcode information into a barcode scanner.

No. of Pages : 25 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27223

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001660 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN OBJECT TRACKING SYSTEM AND METHOD THEREOF

:G01S0013720000, (71)Name of Applicant : G01S0003786000, 1)Bharat Electronics Limited (51) International classification G01V0001300000, Address of Applicant :Outer Ring Road, Nagavara, Bangalore H04L0009060000, 560045, Karnataka Karnataka India H03F0003210000 (72)Name of Inventor : (31) Priority Document No :NA 1)Mahesh S (32) Priority Date :NA 2)Dilep Kumar (33) Name of priority country :NA 3)Amaresh A (86) International Application No :NA 4)Shridhar Y B Filing Date :NA 5)Bhagyashree Patil

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An object tracking system and method is provided. The system (100) is implemented for tracking high maneuvering objects, implemented by combining a Constant Velocity (CV) model for tracking a linear object, at least one Constant Acceleration (CA) model for tracking an accelerating object, and at least one Constant Turn Rate (CTR) for tracking a maneuvering object, in an Interacting Multiple Model (IMM), wherein the number of CTR models is more in the IMM to handle tracking of high maneuvering objects, and each CTR model has different uncertainty factor value to handle different levels of maneuvers of the objects.

No. of Pages : 36 No. of Claims : 32

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27224

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001667 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : LARGE DATA VISUALIZATION SYSTEM AND METHOD THEREOF

:G06F0003048800, (71)Name of Applicant : G06F0003048400, 1)Bharat Electronics Limited (51) International classification G06T0011200000, Address of Applicant :Outer Ring Road, Nagavara, Bangalore G06T0019000000, 560045, Karnataka Karnataka India G06F0003048100 (72)Name of Inventor : (31) Priority Document No :NA 1)Arun Kumar NR (32) Priority Date :NA 2)Sandesh J Kolagi (33) Name of priority country :NA 3)Sheshavishnu Prasad D

(57) Abstract : The present invention provides a data processing system (100) including a screen and a processor (102). The screen is configured to display a plurality of data points (x, y). The processor (102) is configured to determine a fixed reference point (xf, yf) for displaying data on the screen. The processor (102) receives a data point (x1, y1) to be plotted on the screen. The processor (102) calculates x- offset and y-offset for the data point (x1, y1) with respect to the fixed reference point (xf, yf). The processor (102) plots the data point (x1, y1) on the screen based on the aforementioned x-offset and y-offset without replotting other data points on the screen. Ref. Fig.: Fig. 1

No. of Pages : 25 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27225

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001727 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR ASSIGNING A GENUINENESS SCORE FOR A RESPONDENT OF AN ONLINE SURVEY QUESTIONNAIRE

:G06Q0030020000, (71)Name of Applicant : G16H0010200000, 1)INMOBI PTE LTD. (51) International classification G06Q0010060000, Address of Applicant :#25-01, OCBC Center, 65 Chulia G09B0007020000, Street, Singapore-049513. Singapore E21B0047120000 (72)Name of Inventor : (31) Priority Document No :NA 1)Amit Arun Bendale (32) Priority Date :NA 2)Iman Kalyan Pande

(57) Abstract : A method for assigning a genuineness score for a respondent of an online survey questionnaire or parts thereof is disclosed. In some embodiments, the method comprises, training a ML system based on data collected from a plurality of surveys comprising questionnaire, collecting one or more features relating a context of the respondent while the respondent is responding to the survey questionnaire, extracting one or more features relating to the responses to the questions of the survey questionnaire from the received responses, using one or more sets of chosen one or more features to arrive at one or more intermediate genuineness scores for the respondent using one or more decision trees, and arriving at a final genuineness score for the respondent of the online survey or parts thereof by analysing the intermediate scores.

No. of Pages : 28 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27226

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001793 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS FOR PREPARATION OF 2-AMINO-5-HYDROXY PROPIOPHENONE

:C07D0491220000, (71)Name of Applicant : A61K0031474500, 1)LAURUS LABS LIMITED (51) International classification C07C0029400000, Address of Applicant :DS-1, IKP Knowledge Park, Genome C07K0016400000, Valley, Turkapally, Shameerpet Mandal, Medchal-Malkajgiri C07C0221000000 district, Hyderabad Telangana-500078, India. Telangana India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)Uma Maheswer Rao, VASIREDDI (33) Name of priority country :NA 2)Venkata Ramana, KINTALI (86) International Application No :NA 3)Jagadeeswara Rao, DADI Filing Date :NA 4)Raj Koti, KATKURI (87) International Publication No : NA 5)Sridhar, TUMMU

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : ABSTRACT PROCESS FOR PREPARATION OF 2-AMINO-5-HYDROXY PROPIOPHENONE The present invention relates to a process for preparation of 2-Amino-5-hydroxy propiophenone, a key intermediate for the synthesis of camptothecin analogs including 7-Ethyl-10-hydroxycamptothecin (SN-38).

No. of Pages : 0 No. of Claims : 19

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27227

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001845 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : MULTI-PART PUNCH FOR ROTARY PRESS AND METAL ALLOY CUBE COMPACT THEREOF

:B29B0007740000, (71)Name of Applicant : C25B0009080000, 1)Heavy Alloy Penetrator Project (51) International classification C10L0003100000, Address of Applicant :Heavy Alloy Penetrator Project (HAPP) G01N0033200000, HAPP Township PO, Tiruchirapalli Tamil Nadu India B23K0031020000 (72)Name of Inventor : (31) Priority Document No :NA 1)Mr.M.Saravanan

(57) Abstract : The present invention relates to compaction of high density tungsten metal alloy cubes using a custom made replaceable tip insert of varying sizes depending on the need and a customized detachable rotatable punch head minimizing the dwell time to 0.10s providing uniform properties to the metal cube and thus increasing output efficiency. The metal cube thus fabricated possesses a high density of 18.1 g/cc meeting the requirement of prefragments used in defence industry.

No. of Pages : 13 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27228

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001892 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR CHECKING AN AVAILABILITY AND BOOKING OF A TRAVEL ECOSYSTEM

:G06Q0010020000, (71)Name of Applicant : G06Q0030060000, 1)Prasad Patil (51) International classification G06Q0050140000, Address of Applicant :S/O Kamalakshan Patil, Parvathi G06Q0010040000, Nilaya•, Kannar, Cherkady Post, Udupi Tq., Dist. 576215 G10L0015260000 Karnataka India (31) Priority Document No :NA 2)Varun Pynadath Thomas (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)Prasad Patil (86) International Application No :NA 2)Varun Pynadath Thomas

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A system for checking an availability and booking of a travel ecosystem is disclosed. The system includes an input subsystem configured to receive a plurality of inputs for a travel event from a user through a user interface. The system also includes a travel event retrieving subsystem configured to retrieve at least one of a travel service from a travel service database based on the plurality of inputs received from the user. The system also includes a booking subsystem configured to suggest at least one of an optimised travel service based on one or more parameters, to determine an availability of at least one of a suggested travel service from a supplier module based on a plurality of supplier details obtained from a supplier contact database in real-time and to book the at least one of the suggested travel service based on the availability through one or more modes. FIG. 1

No. of Pages : 24 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27229

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001904 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SECURITY MONITORING INFORMATION-BASED PROVISIONING OF DIGITAL CERTIFICATES IN SOFTWARE DEFINED DATA CENTERS

:H04L0029060000, (71)Name of Applicant : H04L0009320000, 1)VMWARE, INC. (51) International classification H04L0029080000, Address of Applicant :3401 Hillview Avenue, Palo Alto, G06F0021600000, California 94304, USA. U.S.A. G06F0009455000 (72)Name of Inventor : (31) Priority Document No :NA 1)RAVI KUMAR REDDY KOTTAPALLI (32) Priority Date :NA 2)AVINASH MUDIVEDU

(57) Abstract : Techniques for provisioning of digital certificates in software defined data centers (SDDCs) based on security monitoring information are disclosed. In one example, a set of digital certificates may be assigned to a group of computing resources of an SDDC. Each digital certificate may include a different security level. The group of computing resources may include applications that use a first digital certificate with a first security level for data communication. Further, security monitoring information associated with the group of computing resources may be received. Furthermore, a second security level to be used for the group of computing resources may be determined based on the security monitoring information. The group of computing resources may be managed by communicating the second security level to an agent associated with the group of computing resources. The agent may then implement a second digital certificate with the second security level for the applications. Figure 1.

No. of Pages : 26 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27230

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001931 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PRIORITIZING CAPACITIES BASED ON PRIORITY PARAMETERS

:H04L0029080000, (71)Name of Applicant : H04L0029060000, 1)VMWARE, INC. (51) International classification G06F0009455000, Address of Applicant :3401 Hillview Avenue, Palo Alto, G06F0003140000, California, United States of America - 94304 U.S.A. G06F0016160000 (72)Name of Inventor : (31) Priority Document No :NA 1)NIDHIN URMESE (32) Priority Date :NA 2)AKSHAY BHANDARI

(57) Abstract : Certain aspects of the present disclosure relate to methods and systems for selecting one of a plurality of capacities to provide a service for a client machine in a multi-cloud virtual desktop infrastructure (VDI) system. In certain aspects, a method receiving a request for the service from the client machine, the request indicating a first bandwidth rating associated with the first capacity and a second bandwidth rating associated with the second capacity. The method further includes prioritizing the first capacity over the second capacity based on a first one or more priority parameters associated with the first capacity and a second one or more priority parameters associated with the second capacity. The method further includes indicating a first identifier of the service associated with the first capacity to the client machine, wherein the client machine uses the first identifier to connect to the service at the first capacity.

No. of Pages : 30 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27231

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001934 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SILK-BASED BIONANOCOMPOSITE MEMBRANE AND PROCESS OF PREPARING THE SAME

:C07K0014435000, (71)Name of Applicant : A61K0008640000, 1)JAIN UNIVERSITY (51) International classification A61K0009000000, Address of Applicant :JAIN GLOBAL CAMPUS, 45TH KM, G01N0021640000, NH-209, JAKKASANDRA POST, KANAKAPURA TALUK, A61K0008190000 RAMANAGARA DISCTRICT KARNATAKA, INDIA (31) Priority Document No :NA Karnataka India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)DIBYENDU MONDAL (86) International Application No :NA 2)S.K. NATARAJ Filing Date :NA 3)MANOHAR H.M (87) International Publication No : NA 4)SACHIN SETH

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A silk-based bio-nanocomposite membrane and process for preparation of the same. The present invention relates to an improved process for the preparation of silk based bio-nanocomposite (naturally available Bombyx mori silk/Spider silk) in presence of ionic liquids (ILs) which is an eco-friendly solvent. More particularly, the present invention relate to the development of simple, cost effective and less time consuming protocol for the preparation of silk-based nanocomposite with different metal nanoparticles in a IL which is designed in such a way that they can act as the dissolution medium of the silk protein and also solvent for the preparation of the bio-nanocomposites.

No. of Pages : 27 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27232

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001937 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM TO AUTO PLAN A TRAVEL EVENT AND METHOD TO OPERATE THE SAME

:G06Q0010020000, (71)Name of Applicant : G06Q0010060000, 1)Prasad Patil (51) International classification G06Q0030060000, Address of Applicant :S/O Kamalakshan Patil, Parvathi H04B0017140000, Nilaya•, Kannar, Cherkady Post, Udupi Tq., Dist. 576215 G05B0023020000 Karnataka India (31) Priority Document No :NA 2)Varun Pynadath Thomas (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)Prasad Patil (86) International Application No :NA 2)Varun Pynadath Thomas

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A system to auto plan a travel event and a method to operate is provided. The input module is configured to capture one or more inputs from a user. The travel retrieving module is configured to retrieve ecosystem information associated with at least one selected service from at least one travel database. The planning module is configured to process the one or more inputs and ecosystem information based on one or more factors by using at least one of an analysis technique and a prediction technique in real time. The planning module is also configured to generate a plurality of travel plans based on a processed result. The update travel module is configured to select one of the plurality of travel plans for the travel event. The present disclosure provides travel planning system with incorporation of one or more services from the plurality of systems in real time. FIG. 1

No. of Pages : 21 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27233

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001939 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS DISCOVERY AND AUTOMATIC ROBOTIC SCRIPTS GENERATION FOR DISTRIBUTED COMPUTING RESOURCES

:G06F0009500000, (71)Name of Applicant : G06Q0010060000, 1)EPIANCE SOFTWARE PVT. LTD. (51) International classification G06Q0010100000, Address of Applicant :No. 2, Maruthi Towers, 1st Floor 9th 'B' G06F0009480000, Main Road, Ex Chairman Layout, Banaswadi Main Road, H04L0029080000 Bangalore “ 50043, Karnataka, India Karnataka India (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)RAVI RAMAMURTHY (33) Name of priority country :NA 2)RAMGOPAL M. CILLANKI (86) International Application No :NA 3)SATYANARAYANA V. V. KONDAMURI

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Techniques for process discovery and automatic generation of robotic scripts for distributed computing resources are disclosed. In one embodiment, at least one automatable process step associated with an activity performed while interacting with at least one application may be determined. The at least one automatable process step may be segregated into multiple tasks based on parallel executable tasks and sequentially executable tasks. Different types of distributed computing resources may be determined to execute the multiple tasks based on the segregation. A modified process flow corresponding to the at least one automatable process step may be automatically generated based on the segregated multiple tasks and the different types of the distributed computing resources. Further, a robotic script based on the modified flow of the at least one automatable process step may be automatically generated. The robotic script may be executed to perform the activity.

No. of Pages : 41 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27234

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001942 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS FOR METALLIZATION OF DNA AND APPLICATIONS THEREOF

:G06F0016182000, (71)Name of Applicant : H04L0029080000, 1)JAIN UNIVERSITY (51) International classification A61K0035600000, Address of Applicant :JAIN GLOBAL CAMPUS, 45TH KM, H04L0029060000, NH-209, JAKKASANDRA POST, KANAKAPURA TALUK, C07J0071000000 RAMANAGARA DISCTRICT, KARNATAKA, INDIA, PIN (31) Priority Document No :NA CODE-562 112. Karnataka India (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)DIBYENDU MONDAL (86) International Application No :NA 2)S.K. NATARAJ Filing Date :NA 3)SUPRATIM CHAKRAVARTHY

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An improved process for metallization of DNA in Deep Eutectic Solvents (DESs) and its applications thereof, is disclosed herein. The present invention relates to the metallization of DNA (from salmon milt; Sigma Aldrich) in presence of eco-friendly DESs.

No. of Pages : 30 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27235

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001952 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : UPGRADE IMPLEMENTATION OF A VIRTUALIZATION MANAGEMENT SYSTEM

:H04L0029120000, (71)Name of Applicant : G06F0009455000, 1)VMWARE, INC. (51) International classification H04L0029060000, Address of Applicant :3401 Hillview Avenue, Palo Alto, G06F0009500000, California U.S.A. G06F0008656000 (72)Name of Inventor : (31) Priority Document No :NA 1)RAVI SHANKAR NANDULA (32) Priority Date :NA 2)AKASH KODENKIRI (33) Name of priority country :NA 3)RAMESH VEPURI LAKSHMINARAYANA

(57) Abstract : Aspects of updating or upgrading a management system for a virilized computing environment are described. In some aspects, a virtualization management system that manages a virtualized computing environment can be upgraded or updated with limited downtime of the system by deploying a new instance of the system and subsequently assigning a network address of the previous instance to the new instance once it is deployed in the environment.

No. of Pages : 29 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27236

(12) PATENT APPLICATION PUBLICATION (21) Application No.201941001977 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DEVICE FOR DIVERSITY COMBINING AT DATA LEVEL

:H04B0007080000, (71)Name of Applicant : H04W0028060000, 1)M/s. Bharat Electronics Limited (51) International classification H04W0036180000, Address of Applicant :Corporate Office, Outer Ring Road, H04W0072120000, Nagavara, Bangalore-560045 Karnataka India H04L0012413000 (72)Name of Inventor : (31) Priority Document No :NA 1)GHAI, Meenakshi (32) Priority Date :NA 2)PUTTA, Venkatesh (33) Name of priority country :NA 3)SARIMELA, Valluri (86) International Application No :NA 4)JAIN, Manoj

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A system for diversity combining at data level is disclosed. The system incorporates a receiving unit, an isolation unit and a combining unit to combine the data packets. It checks a duplicate data packet and further discards the duplicate data packet by the isolation unit, such that unique data packets are combined.. A device for diversity combining at data level is also disclosed which can receive data packet at input Ethernet ports, discard duplicate data packets and combine unique data packets by a processing unit, and transfer the combined data packet by output Ethernet ports. The device incorporates media access control MAC layer for handling the data packets at data level.

No. of Pages : 33 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27237

(12) PATENT APPLICATION PUBLICATION (21) Application No.201944005445 A (19) INDIA (22) Date of filing of Application :12/02/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND SYSTEM FOR PREVENTING FAILURES OF A PRODUCT IN A VIRTUAL TESTING ENVIRONMENT

:G06F0011000000, (71)Name of Applicant : G06F0011070000, 1)WIPRO LIMITED (51) International classification G01R0031280000, Address of Applicant :Doddakannelli, Sarjapur Road, G05B0015020000, Bangalore 560035, Karnataka, India. Karnataka India G06F0011360000 (72)Name of Inventor : (31) Priority Document No :16/244,563 1)VENKATA SUBRAMANIAN JAYARAMAN (32) Priority Date :10/01/2019 2)KAVITHA GOPALAKRISHNAN (33) Name of priority country :U.S.A. 3)PIYUSH BATWAL

(57) Abstract : The present disclosure is related to a method and a system for preventing failures of a product of real production environment in virtual testing environment. A virtual process corresponding to each physical process related to the product is created and replicated in real-time in the virtual testing environment based on input data related to each physical process. Further one or more errors that occurred during implementation of each virtual process and corresponding error pattern are detected and the error pattern corresponding to each of the one or more errors is analysed with corresponding historical pattern to predict the failures of the product. Finally a solution for resolving the one or more errors is determined to prevent occurrence of the predicted failures in each physical process. The present disclosure provides accurate failure predictions and accurate remedies for preventing the predicted failures based on real-time data. FIG.2A

No. of Pages : 33 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27238

(12) PATENT APPLICATION PUBLICATION (21) Application No.201944051787 A (19) INDIA (22) Date of filing of Application :13/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHODS AND SYSTEMS FOR CRYPTOGRAPHIC KEYS EXCHANGE

:H04L0009080000, (71)Name of Applicant : H04L0029060000, 1)MASTERCARD INTERNATIONAL INCORPORATED (51) International classification H04L0009320000, Address of Applicant :2000 Purchase Street, Purchase, NY G06Q0020380000, 10577, United States of America U.S.A. H04L0029080000 (72)Name of Inventor : (31) Priority Document No :10201900198S 1)Ritesh Chaudhari (32) Priority Date :09/01/2019 2)Ashish Dhande (33) Name of priority country :Singapore 3)Ashish Patel (86) International Application No :NA 4)Chetan Bhalerao

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Embodiments provide methods, and systems for cryptographic keys exchange. A method includes receiving, by a server system, a client public key being part of a client asymmetric key pair from a client device. The method includes sending, by the server system, a server public key being part of a server asymmetric key pair to the client device. The method includes generating, by the server system, a random value master key and sending the random value master key encrypted using the client public key to the client device. The method includes generating, by the server system, an initial unique session key and sending the initial unique session key encrypted under the random value master key to the client device. A unique session key from the set of the unique session keys is used by the client device to encrypt a session data for transmission to the server system per session. FIG. 7

No. of Pages : 66 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27239

(12) PATENT APPLICATION PUBLICATION (21) Application No.201944051788 A (19) INDIA (22) Date of filing of Application :13/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHODS AND SYSTEMS FOR AVAILING OFFERS IN CARD BASED PAYMENT TRANSACTION

:G06Q0030020000, (71)Name of Applicant : G06Q0020400000, 1)MASTERCARD INTERNATIONAL INCORPORATED (51) International classification G06Q0020340000, Address of Applicant :2000 Purchase Street, Purchase, NY G06Q0020100000, 10577, United States of America U.S.A. H04N0021810000 (72)Name of Inventor : (31) Priority Document No :10201900318Y 1)Ashish Yeshwant Bhosale (32) Priority Date :14/01/2019 2)Prasenjit Bhattacharjee (33) Name of priority country :Singapore 3)Akshay Varma (86) International Application No :NA 4)Parameswaran Venkatasubramanian Filing Date :NA 5)Abhishek Chaturvedi (87) International Publication No : NA 6)Lakshmi Narasimhan Ramanujam

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Systems and methods for facilitating a transaction between a cardholder, registered with a first payment entity, and a second payment entity other than the first payment entity in cases when the second payment entity promotes an offer which the cardholder wants to avail. The method includes receiving a first service request from a user at a server system associated with the first payment entity. The first service request is a request to avail the offer using a first payment card of the user. The method further includes facilitating authentication of the first service request at the first payment entity. Upon successful authentication, the method includes sending a second service request to second payment entity and receiving approval from the second payment entity for availing the offer. The method further includes receiving a second payment card from second issuing entity, where the second payment card is eligible for availing the offer. FIG. 11

No. of Pages : 80 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27240

(12) PATENT APPLICATION PUBLICATION (21) Application No.201944052352 A (19) INDIA (22) Date of filing of Application :17/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROTECTING INTEGRITY OF LOG DATA

:G06F0011140000, (71)Name of Applicant : G06F0021640000, 1)Siemens Aktiengesellschaft (51) International classification G06F0011340000, Address of Applicant :Werner-von-Siemens-Strae 1, 80333 G06F0021710000, M¼nchen, GERMANY Germany G06F0017400000 (72)Name of Inventor : (31) Priority Document No :19152043.6 1)Feist, Christian Peter (32) Priority Date :16/01/2019 2)Sel, Tolga

(33) Name of priority country :EPO (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Abstract Protecting integrity of log data The invention relates to a method for protecting the integrity of log data. The log data comprises a sequence of log data elements associated with an operation of a first logic circuit (21). The method (100) comprises receiving (104), at a second logic circuit (30) remote from the first logic circuit (21), a log data element of the sequence of log data elements. Based on the log data element and secret information unknown to the first logic circuit (21), a protected log data element (60) is generated at the second logic circuit (30). (Fig. 1)

No. of Pages : 33 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27241

(12) PATENT APPLICATION PUBLICATION (21) Application No.201944052393 A (19) INDIA (22) Date of filing of Application :17/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PREDICTIVE ISSUE DETECTION

:G06N0020000000, (71)Name of Applicant : G06Q0030040000, 1)Accenture Global Solutions Limited (51) International classification B29D0011000000, Address of Applicant :3 Grand Canal Plaza, Grand Canal G06Q0030020000, Street Upper, Dublin, 4, Ireland Ireland G01B0011250000 (72)Name of Inventor : (31) Priority Document No :16/245,953 1)SUBRAMANIAN Revathi (32) Priority Date :11/01/2019 2)GONG Hongrui (33) Name of priority country :U.S.A. 3)AL-SHYOUKH Ibrahim Ali Odeh

(57) Abstract : A device may receive data that includes invoice data related to historical invoices from an organization, contact data related to historical contacts between the organization and various entities, and dispute data related to historical disputes between the organization and the various entities. The device may determine a profile for the data. The device may determine a set of supervised learning models for the historical invoices based on one or more of the historical contacts, the historical disputes, the historical invoices, or historical patterns related to the historical invoices. The device may determine, using the profile, a set of unsupervised learning models for the historical invoices independent of the one or more of the historical contacts, the historical disputes, or the historical patterns. The device may determine, utilizing a super model, a prediction for the invoice after the super model is trained. The device may perform one or more actions.

No. of Pages : 83 No. of Claims : 14

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27242

(12) PATENT APPLICATION PUBLICATION (21) Application No.201947044101 A (19) INDIA (22) Date of filing of Application :31/10/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A DISTRIBUTED MULTI-PARTY SECURITY MODEL TRAINING FRAMEWORK FOR PRIVACY PROTECTION

:G06F 21/60, G06N (71)Name of Applicant : (51) International classification 20/00 1)ALIBABA GROUP HOLDING LIMITED (31) Priority Document No :NA Address of Applicant :Fourth Floor, One Capital Place, P.O. (32) Priority Date :NA Box 847, George Town, Grand Cayman Cayman Island (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :PCT/CN2019/071402 1)WANG, Huazhong Filing Date :11/01/2019 2)YIN, Shan (87) International Publication No :WO 2019/072316 3)YING, Pengfei

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Methods systems and apparatus including computer programs encoded on computer storage media for training a multi-party secure logistic regression model (SLRM). One of the methods includes receiving at a plurality of secure computation nodes (SCNs) a plurality of random numbers from a random number provider; encrypting at each SCN data stored at the SCN using the received random numbers; iteratively updating a secure logistic regression model (SLRM) by using the encrypted data from each SCN; and after iteratively updating the SLRM outputting a result of the SLRM wherein the result is configured to enable a service to be performed by each SCN.

No. of Pages : 29 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27243

(12) PATENT APPLICATION PUBLICATION (21) Application No.201947044103 A (19) INDIA (22) Date of filing of Application :31/10/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A LOGISTIC REGRESSION MODELING SCHEME USING SECRETE SHARING

(51) International classification :G06N 3/02 (71)Name of Applicant : (31) Priority Document No :NA 1)ALIBABA GROUP HOLDING LIMITED (32) Priority Date :NA Address of Applicant :Fourth Floor, One Capital Place, P.O. (33) Name of priority country :NA Box 847, George Town, KY1-1103 Grand Cayman, Cayman (86) International Application No :PCT/CN2019/071394 Islands Cayman Island Filing Date :11/01/2019 (72)Name of Inventor : (87) International Publication No :WO 2019/072315 1)WANG, Huazhong (61) Patent of Addition to Application 2)LI, Lichun :NA Number 3)YIN, Shan :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Methods systems and apparatus including computer programs encoded on computer storage media for training a multi-party secure logistic regression model (SLRM) by using secrete sharing (secret sharing) techniques. One of the methods includes dividing sample training data for a secure logistic regression model (SLRM) into a plurality of shares using secret sharing (SS) wherein each share is distributed to a secure computation node (SCN); iteratively updating parameters associated with the SLRM using each share of the sample training data wherein the iterative updating continues until the occurrence of a predetermined condition; and after iteratively updating the parameters associated with the SLRM outputting a training result configured for use by each SCN.

No. of Pages : 29 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27244

(12) PATENT APPLICATION PUBLICATION (21) Application No.201947044455 A (19) INDIA (22) Date of filing of Application :02/11/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DISPLAY PANEL AND DISPLAY DEVICE

(51) International classification :G09G 3/3233 (71)Name of Applicant : (31) Priority Document No :201820713468.9 1)BOE TECHNOLOGY GROUP CO., LTD. (32) Priority Date :14/05/2018 Address of Applicant :No.10 Jiuxianqiao Rd., Chaoyang (33) Name of priority country :China District, Beijing 100015 P.R. China (86) International Application No :PCT/CN2019/071187 2)BEIJING BOE TECHNOLOGY DEVELOPMENT Filing Date :10/01/2019 CO.,LTD (87) International Publication No :WO/2019/218713 (72)Name of Inventor : (61) Patent of Addition to Application 1)XU,CHEN :NA Number 2)HAO,XUEGUANG :NA Filing Date 3)QIAO,YONG (62) Divisional to Application Number :NA 4)WU,XINYIN

Filing Date :NA

(57) Abstract : A display panel and a display device. The display panel (100) includes a pixel circuit structure (10), a data line (12) and a voltage signal line. The data line (12) is connected to the pixel circuit structure (10) to provide a data signal; the voltage signal line is connected to the pixel circuit structure (10) to provide a voltage signal, the voltage signal is a constant voltage signal; the pixel circuit structure (10) includes a first stabilization capacitor provided between the data line (12) and the voltage signal line. The display panel can reduce the interference of the signal on the data line to the gate electrode of the driving transistor by setting the first stabilization capacitor.

No. of Pages : 35 No. of Claims : 22

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27245

(12) PATENT APPLICATION PUBLICATION (21) Application No.201947045081 A (19) INDIA (22) Date of filing of Application :06/11/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DISPLAY PANEL AND DISPLAY DEVICE

:G09G 3/3208, H01L (71)Name of Applicant : (51) International classification 27/32 1) BOE TECHNOLOGY GROUP CO., LTD (31) Priority Document No :201820812831.2 Address of Applicant :No.10 Jiuxianqiao Rd., Chaoyang (32) Priority Date :29/05/2018 District, Beijing 100015 P.R. China (33) Name of priority country :China 2)BEIJING BOE TECHNOLOGY DEVELOPMENT CO., (86) International Application No :PCT/CN2019/071409 LTD. Filing Date :11/01/2019 (72)Name of Inventor : (87) International Publication No : NA 1) XU, Chen (61) Patent of Addition to Application 2)HAO, Xueguang :NA Number 3) XIAN, Jianbo :NA Filing Date 4) QIAO, Yong (62) Divisional to Application Number :NA 5)WU, Xinyin

Filing Date :NA

(57) Abstract : ABSTRACT DISPLAY PANEL AND DISPLAY DEVICE A display panel and a display device are provided. The display panel includes: a substrate (200), a plurality of pixel units (101), a functional signal line (01), and a first conductive structure (02). The substrate (200) includes a display area (201) and a peripheral area (202) on at least one side of the display area (201), the plurality of pixel units (101) are in the display area (201), each pixel unit (101) includes a light-emitting unit (20) and a pixel circuit structure (10) for providing a driving current to the light-emitting unit (20), and the light-emitting unit (20) is an electroluminescent element. The functional signal line (01) is connected with the pixel circuit structure (10) of each pixel unit (101) and provides a common voltage signal for the pixel circuit structure (10). The first conductive structure (02) is connected in parallel with the functional signal line (01) and is located at a layer different from that of the functional signal line (01). The display panel can improve the display uniformity and the resolution, thereby improving the display quality of the display panel.

No. of Pages : 53 No. of Claims : 25

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27246

(12) PATENT APPLICATION PUBLICATION (21) Application No.201947051178 A (19) INDIA (22) Date of filing of Application :11/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : FLUID CACHING

:G01N 35/08, G01N (71)Name of Applicant : (51) International classification 35/02, G01N 37/00 1)ILLUMINA, INC. (31) Priority Document No :62/621,270 Address of Applicant :5200 Illumina Way, San Diego, (32) Priority Date :24/01/2018 California 92122 U.S.A. (33) Name of priority country :U.S.A. 2)ILLUMINA CAMBRIDGE LIMITED (86) International Application No :PCT/US2019/013002 (72)Name of Inventor : Filing Date :10/01/2019 1)COX-MURANAMI, Wesley (87) International Publication No :WO 2019/147419 2)SEGALE, Darren, Robert (61) Patent of Addition to Application 3)MILLER, Oliver, Jon :NA Number 4)FOLEY, Jennifer, Olivia :NA Filing Date 5)KHURANA, Tarun Kumar (62) Divisional to Application Number :NA 6)CRIVELLI, Paul Filing Date :NA 7)WATTS, Gary

(57) Abstract : An apparatus for directing fluid into and out of a fluidic device includes two or more fluid prime channels connected to a fluid inlet of the fluidic device, a flow control valve for each fluid prime channel to control flow between the fluid prime channel and the fluid inlet, one or more outlet channels connected to a fluid outlet of the fluidic device, and a flow control valve for each outlet channel to control flow between the fluid outlet and the associated outlet channel. An apparatus for delivering fluids to a fluid inlet includes a plate that is rotatable about an axis of rotation and a plurality of fluid compartments disposed on the plate, each compartment having a fluid exit port disposed at a common radial distance from the axis of rotation and positioned to align with the fluid inlet as the plate rotates about the axis of rotation.

No. of Pages : 23 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27247

(12) PATENT APPLICATION PUBLICATION (21) Application No.201947051773 A (19) INDIA (22) Date of filing of Application :13/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PATTERN ANGLE SPATIAL SELECTION STRUCTURED ILLUMINATION IMAGING

:G02B 21/18, G02B (71)Name of Applicant : (51) International classification 27/42 1)ILLUMINA, INC. (31) Priority Document No :62/618,059 Address of Applicant :5200 Illumina Way, San Diego, CA (32) Priority Date :16/01/2018 92122 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2019/013504 1)NEWMAN, Peter, Clarke Filing Date :14/01/2019 2)CONDELLO, Danilo (87) International Publication No :WO 2019/143564 3)LU, Shaoping (61) Patent of Addition to Application 4)PRINCE, Simon :NA Number 5)SIU, Merek, C. :NA Filing Date 6)HONG, Stanley, S. (62) Divisional to Application Number :NA 7)LIU, Aaron

Filing Date :NA

(57) Abstract : The disclosure provides for structured illumination microscopy (SIM) imaging systems. In one set of implementations, a SIM imaging system may be implemented as a multi-arm SIM imaging system, whereby each arm of the system includes a light emitter and a beam splitter (e.g., a transmissive diffraction grating) having a specific, fixed orientation with respect to the system"s optical axis. In a second set of implementations, a SIM imaging system may be implemented as a multiple beam splitter slide SIM imaging system, where one linear motion stage is mounted with multiple beam splitters having a corresponding, fixed orientation with respect to the system"s optical axis. In a third set of implementations, a SIM imaging system may be implemented as a pattern angle spatial selection SIM imaging system, whereby a fixed two-dimensional diffraction grating is used in combination with a spatial filter wheel to project one-dimensional fringe patterns on a sample.

No. of Pages : 56 No. of Claims : 21

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27248

(12) PATENT APPLICATION PUBLICATION (21) Application No.201947052150 A (19) INDIA (22) Date of filing of Application :16/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : MULTI-ARM STRUCTURED ILLUMINATION IMAGING

(51) International classification :G02B 21/06 (71)Name of Applicant : (31) Priority Document No :62/618068 1)ILLUMINA, INC. (32) Priority Date :16/01/2018 Address of Applicant :5200 Illumina Way San Diego, CA (33) Name of priority country :U.S.A. 92122 U.S.A. (86) International Application No :PCT/US2019/013480 (72)Name of Inventor : Filing Date :14/01/2019 1)HONG, Stanley, S.

(87) International Publication No :WO 2019/143556 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

No. of Pages : 56 No. of Claims : 25

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27249

(12) PATENT APPLICATION PUBLICATION (21) Application No.201947052176 A (19) INDIA (22) Date of filing of Application :16/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DUAL OPTICAL GRATING SLIDE STRUCTURED ILLUMINATION IMAGING

(71)Name of Applicant :

1)ILLUMINA, INC. (51) International classification :G02B 21/14 Address of Applicant :5200 Illumina Way San Diego, CA (31) Priority Document No :62/618057 92122 U.S.A. (32) Priority Date :16/01/2018 2)ILLUMINA CAMBRIDGE LIMITED (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2019/013496 1)NEWMAN, Peter, Clarke Filing Date :14/01/2019 2)CONDELLO, Danilo (87) International Publication No :WO 2019/143561 3)LU, Shaoping (61) Patent of Addition to Application :NA 4)PRINCE, Simon Number :NA 5)SIU, Merek, C. Filing Date 6)HONG, Stanley, S. (62) Divisional to Application Number :NA 7)LIU, Aaron Filing Date :NA 8)SKINNER, Gary, Mark 9)EVANS, Geraint, Wyn

No. of Pages : 56 No. of Claims : 26

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27250

(12) PATENT APPLICATION PUBLICATION (21) Application No.201947054057 A (19) INDIA (22) Date of filing of Application :26/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : REAL TIME CONTROLLER SWITCHING

:G02B 21/00, G02B (71)Name of Applicant : (51) International classification 7/28 1)ILLUMINA, INC. (31) Priority Document No :62/617062 Address of Applicant :5200 Illumina Way San Diego, CA (32) Priority Date :12/01/2018 92122 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2019/013098 1)ZHOU, Chunhong (Allen) Filing Date :10/01/2019 2)BAILEY, John (87) International Publication No :WO 2019/140122 3)BLAIR, Dustin

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An imaging system may include a sample stage having a surface to support a sample to be scanned by the imaging system; an optical stage having an objective lens, the optical stage being positionable relative to the sample stage; an actuator physically coupled to at least one of the sample stage and the optical stage to move the sample stage relative to the optical stage; a servo circuit to control the actuator; a first set of control parameters to control the servo circuit; a second set of control parameters to control the servo circuit; and a servo control circuit to apply the first set of control parameters to the servo circuit when the imaging system is operating in a first mode of operation and to apply the second set of control parameters to the servo circuit when the imaging system is operating in a second mode of operation.

No. of Pages : 34 No. of Claims : 29

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27251

(12) PATENT APPLICATION PUBLICATION (21) Application No.202044000140 A (19) INDIA (22) Date of filing of Application :02/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ELECTRONIC MESSAGE TRANSLATION MANAGEMENT

:H04L0029080000, (71)Name of Applicant : G06Q0010060000, 1)Arm IP Limited (51) International classification G06F0008650000, Address of Applicant :110 Fulbourn Road, Cambridge CB1 H04W0076110000, 9NJ, United Kingdom, U.K. H04L0029120000 (72)Name of Inventor : (31) Priority Document No :19 00414.2 1)Ros, Daniel (32) Priority Date :11/01/2019 2)Taylor, Robert George (33) Name of priority country :U.K. 3)Stanford, John-Paul (86) International Application No :NA 4)Ward, Dan Filing Date :NA 5)Ford, Oliver

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present technology provides a computer-implemented method of operation of a translation manager intermediating message distribution in a plurality of networked devices, comprising receiving at the translation manager a request from a networked device for registration; parsing said message by the translation manager to derive an identifier of the networked device; determining by the translation manager at least one capability of the networked device; creating a pairing of the identifier of the networked device and a profile comprising the at least one capability of the networked device; storing the pairing in a data store for use by said translation manager on request to translate a message. The storing the pairing may comprise populating a lookup table and/or operating a database.

No. of Pages : 40 No. of Claims : 18

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27252

(12) PATENT APPLICATION PUBLICATION (21) Application No.202044000241 A (19) INDIA (22) Date of filing of Application :03/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD FOR CONTROLLING A RAILWAY VEHICLE, A CONTROLLER AND A RAILWAY VEHICLE

:H02P0021200000, (71)Name of Applicant : B61L0027000000, 1)ALSTOM Transport Technologies (51) International classification B61L0025020000, Address of Applicant :48 rue Albert Dhalenne, 93400 SAINT- B61L0003000000, OUEN-SUR-SEINE, FRANCE France B60L0003000000 2)Politecnico Di Milano (31) Priority Document No :19305032.5 (72)Name of Inventor : (32) Priority Date :09/01/2019 1)DOLCINI Andrea (33) Name of priority country :EPO 2)RADOVAN Simone (86) International Application No :NA 3)CAPORALE Danilo Filing Date :NA 4)COLANERI Patrizio

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : According to the invention, a method is provided for controlling a railway vehicle (1) comprising a motor controller (7) for an electric machine (5) acting on at least one wheel of the railway vehicle, the method comprising: - receiving torque request from a central controller (9); - determining the actual speed of the railway vehicle (1); -determining the actual wheel rotational speed of the railway vehicle (1); - receiving an estimated torque (Test) from the motor controller (7); - estimating the maximal adherence coefficient based on the wheel rotational speed and the estimated torque (Test) received from the motor controller; - determining a reference torque (TCOntr) based on the estimated adherence coefficient; and - providing the reference torque (TCOntr) to the motor controller (7).

No. of Pages : 20 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27253

(12) PATENT APPLICATION PUBLICATION (21) Application No.202044000440 A (19) INDIA (22) Date of filing of Application :06/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : FUEL SUPPLYING DEVICE

:F02M0037100000, (71)Name of Applicant : B60K0015030000, 1)KEIHIN CORPORATION (51) International classification F02M0037440000, Address of Applicant :26-2, Nishishinjuku 1-chome, Shinjuku- F02M0059440000, ku, Tokyo 163-0539, Japan Japan B62J0035000000 (72)Name of Inventor : (31) Priority Document No :2019-002631 1)NAITO, Toshihiko

(32) Priority Date :10/01/2019 (33) Name of priority country :Japan (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : In a housing (38) configuring a fuel supplying device (10), a pump holding section (42) that holds a fuel pump (16), and a flange section (50) which is connected to a lid member (14) that blocks a tank opening (22) of a fuel tank (12), are connected together by a thin plate-shaped connecting wall (52). In this connecting wall (52), in a cross section parallel to a blocking surface (34) of the lid member (14), a width-direction thickness of a first wall section (54) that extends in a longitudinal direction is formed smaller than a width dimension of a connecting section (46) of the housing (38) containing therein a third fuel passage (66). Moreover, the other end section of the first wall section (54) has formed thereon a second wall section (56) that extends in a width direction and lies on an outer side in a radial direction of the fuel pump (16). [Figure 2]

No. of Pages : 23 No. of Claims : 2

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27254

(12) PATENT APPLICATION PUBLICATION (21) Application No.202044000441 A (19) INDIA (22) Date of filing of Application :06/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : WEFT WITHDRAWING DEVICE OF AIR JET LOOM

:D03D0047300000, (71)Name of Applicant : D03D0047270000, 1)KABUSHIKI KAISHA TOYOTA JIDOSHOKKI (51) International classification D03D0051340000, Address of Applicant :2-1, Toyoda-cho, Kariya-shi, Aichi-Ken D03D0047280000, 448-8671, Japan Japan D03D0051000000 (72)Name of Inventor : (31) Priority Document No :2019-003965 1)MUROYA, Haruki (32) Priority Date :14/01/2019 2)ARAI, Ryuji

(33) Name of priority country :Japan (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A weft withdrawing device of an air jet loom (10) includes a blow nozzle (17) blowing a weft (Y) that is ejected from a weft insertion main nozzle (12) and determined to be a weft insertion failure to guide the weft (Y) to a weft withdrawing passage (19, 22, 23), a weft introducing duct (19) that is integrally swingable with a sley (11) forward and backward, a weft withdrawing mechanism (26, 27, 37, 61, 62) withdrawing the weft (Y) guided to the weft introducing duct (19), and a weft sensor (39) optically detecting the weft (Y). The weft withdrawing device of the air jet loom (10) includes a weft guide member (38). The weft guide member (38) includes a cloth fell side top portion (54) and a let-off side top portion (55). The cloth fell side top portion (54) is located above the weft withdrawing passage (19, 22, 23). [Figure 5]

No. of Pages : 29 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27255

(12) PATENT APPLICATION PUBLICATION (21) Application No.202044000442 A (19) INDIA (22) Date of filing of Application :06/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ROOF MEMBER OR CEILING MEMBER, AND CONSTRUCTION

:F24F0005000000, (71)Name of Applicant : F24F0011460000, 1)SUMITOMO CHEMICAL COMPANY, LIMITED (51) International classification F24F0012000000, Address of Applicant :27-1, Shinkawa 2-chome, Chuo-ku, B32B0027200000, Tokyo 104-8260, Japan Japan C30B0015140000 (72)Name of Inventor : (31) Priority Document No :2019-003258 1)HIROTA, Tomoo (32) Priority Date :11/01/2019 2)MATSUI, Hirokazu

(57) Abstract : To provide a roof member or a ceiling member, which is capable of reducing cooling and heating energy consumption by reducing influent and effluent heat amounts between indoor and outdoor environments in such a situation that the indoor temperature is kept constant by use of cooling and heating equipment independently of the outdoor air temperature changes. Provided is a member for roofing or ceiling, including: an outdoor-side heat insulating layer (A); an indoor-side heat insulating layer (B); and a heat storage layer between the outdoor-side heat insulating layer (A) and the indoor-side heat insulating layer (B), in which R = 0.10 where R is represented by Equation (3): R = 2(R1 - 0.5)2 + (R2 - 1)2 + (R3 - 0.55)2 (3), R1 = (Tb/Kb)/(Ta/Ka + Tb/Kb) (1), where Ka is a thermal conductivity of the outdoor- side heat insulating layer (A), Ta is a thickness of the outdoor-side heat insulating layer (A), Kb is a thermal conductivity of the indoor-side heat insulating layer (B), and Tb is a thickness of the indoor-side heat insulating layer (B), R2 is a ratio of a latent heat amount of the heat storage layer in a temperature range of 15°C to 50°C with respect to a latent heat amount of the heat storage layer in a temperature range of -10°C to 60°C, and R3 = L5/L20 (2)

No. of Pages : 93 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27256

(12) PATENT APPLICATION PUBLICATION (21) Application No.202044000493 A (19) INDIA (22) Date of filing of Application :06/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : EXTERIOR WALL MEMBER AND CONSTRUCTION

:E06B0003670000, (71)Name of Applicant : F24F0005000000, 1)SUMITOMO CHEMICAL COMPANY, LIMITED (51) International classification F24F0011460000, Address of Applicant :27-1, Shinkawa 2-chome, Chuo-ku, E04B0001800000, Tokyo 104-8260 Japan F24F0012000000 (72)Name of Inventor : (31) Priority Document No :2019-003257 1)HIROTA, Tomoo (32) Priority Date :11/01/2019 2)MATSUI, Hirokazu

(57) Abstract : To provide an exterior wall member capable of reducing cooling and heating energy consumption by reducing influent and effluent heat amounts between indoor and outdoor environments in such a situation that the indoor temperature is kept constant by use of cooling and heating equipment independently of the outdoor air temperature changes, and to provide a construction including the exterior wall member. Provided is an exterior wall member, including: an outdoor-side heat insulating layer (A); an indoor-side heat insulating layer (B); and a heat storage layer between the outdoor-side heat insulating layer (A) and the indoor-side heat insulating layer (B), in which R = 0.20 where R is represented by Equation (3): R = 2(R1 - 0.5)2 + (R2 - 1)2 + (R3 - 0.55)2 (3), where R1 is represented by Equation (1): R1 = (Tb/Kb)/(Ta/Ka + Tb/Kb) (1), where Ka is a thermal conductivity of the outdoor- side heat insulating layer (A), Ta is a thickness of the outdoor-side heat insulating layer (A), Kb is a thermal conductivity of the indoor-side heat insulating layer (B), and Tb is a thickness of the indoor-side heat insulating layer (B), R2 is a ratio of a latent heat amount of the heat storage layer in a temperature range of 15°C to 40°C with respect to a latent heat amount of the heat storage layer in a temperature range of -10°C to 60°C, and R3 = L5/L20 (2)

No. of Pages : 92 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27257

(12) PATENT APPLICATION PUBLICATION (21) Application No.202044000638 A (19) INDIA (22) Date of filing of Application :07/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AIR PURIFICATION APPARATUS FOR VEHICLE

:B60H0001000000, (71)Name of Applicant : F24F0003140000, 1)HONDA MOTOR CO., LTD. (51) International classification B01J0020340000, Address of Applicant :1-1, Minami-Aoyama 2-chome, Minato- B60H0003060000, ku, Tokyo 107-8556 Japan B01D0053260000 (72)Name of Inventor : (31) Priority Document No :2019-005243 1)MATSUMOTO, Subaru (32) Priority Date :16/01/2019 2)KAKIZAKI, Shinji

(57) Abstract : An air purification apparatus includes an adsorption unit (10A, 10B), a purification passage (27), and a regeneration passage (28). The adsorption unit adsorbs carbon dioxide and water vapor in air. The purification passage introduces air in a passenger compartment into the adsorption unit, and returns air, from which the carbondioxide and the water vapor are adsorbed and removed by the adsorption unit, into the passenger compartment. The regeneration passage introduces air for regeneration into the adsorption unit, and discharges used air for regeneration obtained by regenerating the adsorption unit to an outside of the vehicle. An upstream side of the adsorption unit of the regeneration passage and the purification passage is constituted by an internal air introduction pipeline configured to introduce air from the passenger compartment. [Figure 3]

No. of Pages : 44 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27258

(12) PATENT APPLICATION PUBLICATION (21) Application No.202044000799 A (19) INDIA (22) Date of filing of Application :08/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AIR FILTER ASSEMBLY

:B01D0046000000, (71)Name of Applicant : F02M0035020000, 1)LEAR CORPORATION (51) International classification F02D0009020000, Address of Applicant :21557 Telegraph Road, Southfield, A63B0024000000, Michigan 48033, USA U.S.A. A62B0018000000 (72)Name of Inventor : (31) Priority Document No :16/249,324 1)David Kazyak (32) Priority Date :16/01/2019 2)Karl Henn (33) Name of priority country :U.S.A. 3)Arjun Yetukuri

(57) Abstract : An air filter assembly includes a seat assembly, an air filter unit, and an electronic control unit. The seat assembly may include a seat base and/or a seat back. The air filter unit may be connected to the seat assembly. The electronic control unit may be configured to automatically control the air filter unit. The air filter assembly may include one or more sensors, and/or the electronic control unit may be configured to automatically control the air filter unit according to information from the one or more sensors. The one or more sensors may include a biometric sensor. The biometric sensor may be configured to detect a body odor of an occupant disposed on the seat assembly. The one or more sensors may include a position sensor. The electrical control unit may be configured to automatically control the air filter unit according to information from the position sensor. [Figure 1A]

No. of Pages : 25 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27259

(12) PATENT APPLICATION PUBLICATION (21) Application No.202044000950 A (19) INDIA (22) Date of filing of Application :09/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : FUEL SUPPLYING DEVICE

:F02M0037100000, (71)Name of Applicant : F02M0037500000, 1)KEIHIN CORPORATION (51) International classification F02M0037440000, Address of Applicant :26-2, Nishishinjuku 1-chome, Shinjuku- B01D0035260000, ku, Tokyo 163-0539 Japan B01D0035027000 (72)Name of Inventor : (31) Priority Document No :2019-003528 1)UMEMOTO, Hiroshi (32) Priority Date :11/01/2019 2)TAMURA, Shinji (33) Name of priority country :Japan 3)INOMATA, Kouichi

(57) Abstract : A fuel supplying device (10) includes: a cylindrical section (46) having a circular arc-like cross-sectional shape and formed along an outer circumference of the fuel pump (18), the cylindrical section having therein a fuel pump (18) accommodated on an inside of a small-diameter section (42) in a housing (16); and a bulging-out section (48) that projects to a radially outer side with respect to the cylindrical section (46). Moreover, an opening section (54) communicating with outside is formed in an outer circumferential surface of the housing (16). Furthermore, a bottom section (56) of the housing (16) has formed therein a filter connecting section (60) into which an intake port (86) of the fuel pump (18) is press-fitted and into which a filter discharge pipe (96) of a filter (20) is inserted. Moreover, a vapor release hole (88) of the fuel pump (18) opens in the housing (16), and is disposed within a space (52) below the opening section (54) in a gravity direction. [Figure 1]

No. of Pages : 29 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27260

(12) PATENT APPLICATION PUBLICATION (21) Application No.202044001173 A (19) INDIA (22) Date of filing of Application :10/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND CONTROL DEVICE FOR OPERATING AN INTERNAL COMBUSTION ENGINE

:F02M0061140000, (71)Name of Applicant : F02D0041200000, 1)MAN Energy Solutions SE (51) International classification F02D0041000000, Address of Applicant :Stadtbachstr. 1, 86153, Augsburg, F23R0003280000, Germany F02D0041240000 (72)Name of Inventor : (31) Priority Document No :10 2019 101 020.9 1)WEBER, Armin (32) Priority Date :16/01/2019 2)KARG, Martin

(57) Abstract : A method for operating an internal combustion engine having multiple cylinders (2), wherein the internal combustion engine comprises at least one fuel injector (6) for each cylinder, and wherein each fuel injector is activated for opening and closing via a solenoid valve of the respective fuel injector. Commencing with the activation of the respective fuel injector (6) for opening, structure- borne sound waves emitted by the fuel injector (6) over the time are detected by measurement. A structure-borne sound wave signal detected by measurement over the time is evaluated in such a manner that dependent on the amount of at least one maximum of the structure-borne sound wave signal and/or dependent on the number of the maximums of the structure-borne sound wave signal and/or in the presence of multiple maximums dependent on the time sequence and/or on the amount of the maximums, an operating state of the respective fuel injector (6) is deduced. FIGURE 1

No. of Pages : 22 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27261

(12) PATENT APPLICATION PUBLICATION (21) Application No.202044001394 A (19) INDIA (22) Date of filing of Application :13/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AUTOMATED LARGE OUTSIDE DIAMETER PREFORM TIPPING PROCESS AND RESULTING GLASS PREFORMS

:C03B0037029000, (71)Name of Applicant : C03B0037027000, 1)Heraeus Quartz North America LLC (51) International classification C03B0023047000, Address of Applicant :100 Heraeus Boulevard, Buford, GA C30B0029060000, 30518, USA U.S.A. C03B0037012000 (72)Name of Inventor : (31) Priority Document No :62/792,562 1)MA, Qiulin (32) Priority Date :15/01/2019 2)CHANG, Kai Huei

(33) Name of priority country :U.S.A. (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An automated large outside diameter preform tipping process. A zone of the preform is heated inside a furnace and softened. The preform tip is shaped and the process is controlled by the movement of the glass above and below the heating zone and by sensing the weight of the lower part of the preform, which in effect is a measure of the viscosity of the softened material. Once the correct viscosity is reached, the bottom holder is moved away from the top holder with a non-linear, accelerated velocity profile (derived from the FEM simulation of glass flow) which is precisely programmed and controlled so that the preform tip is optimally shaped (usually short and sharp tipped) with minimum waste and waveguide distortion when drawn into a fiber. The same concept of the non-linear, accelerated velocity profile can also be applied to other tipping processes such as horizontal preform tipping processes. [Figure 1]

No. of Pages : 67 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27262

(12) PATENT APPLICATION PUBLICATION (21) Application No.202044001594 A (19) INDIA (22) Date of filing of Application :14/01/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ELECTRICAL CONNECTOR

:H01R0013580000, (71)Name of Applicant : H01R0004700000, 1)Tyco Electronics (Shanghai) Co. Ltd. (51) International classification F04C0018020000, Address of Applicant :Sections F, G and H Level 1 Building E21D0021000000, 15, No. 999 Yinglun Road China (Shanghai), Pilot Free Trade H01R0004180000 Zone, Shanghai China (31) Priority Document No :201910037802.2 (72)Name of Inventor : (32) Priority Date :15/01/2019 1)LUO, Ji (33) Name of priority country :China 2)SONG, Zhigang (86) International Application No :NA 3)CHEN, Jiahui Filing Date :NA 4)LIU, Songhua (87) International Publication No : NA 5)WAN, Qingquan (61) Patent of Addition to Application Number :NA 6)ZHANG, Haibo Filing Date :NA 7)HSU, Bing

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An electrical connector (100) adapted to be electrically connected with a cable (200) includes: a fixing assembly (1) comprising a receiving portion (17) extending in an axial direction of the electrical connector (100), an end of the cable (200) being inserted into the receiving portion (17) from a first end of the receiving portion (17); an insulation body (2) extending from a second end of the receiving portion (17); and at least one conductive terminal (3) fixed in the insulation body (2) through an overmolding process. The conductive terminal includes: a mounting portion (31) mounted in the insulation body (2) and configured to be electrically connected with the conductor (201) of the cable (200) by a bolt member (18); and a contact portion (32) extending from the insulation body (2). A conductor of the cable (200) is electrically connected with the conductive terminal (3) mounted in the insulation body (2), thereby simplifying an operation of connecting the cable (200) onto the conductive terminal (3) and decreasing components of the electrical connector (100).

No. of Pages : 27 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27263

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047006194 A (19) INDIA (22) Date of filing of Application :13/02/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PIPE-SHAPED INTEGRALLY MOLDED ARTICLE AND PRODUCTION METHOD FOR PIPE- SHAPED INTEGRALLY MOLDED ARTICLE

:C08J 5/00, B29C (71)Name of Applicant : 49/04, B29C 49/50, 1)TORAY INDUSTRIES, INC. (51) International classification C08L 23/00, C08L Address of Applicant :1-1, Nihonbashi-Muromachi 2-chome, 81/02 Chuo-ku, Tokyo 103-8666 Japan (31) Priority Document No :2018-004060 (72)Name of Inventor : (32) Priority Date :15/01/2018 1)SUZUKI Yuki (33) Name of priority country :Japan 2)SATO Rei (86) International Application No :PCT/JP2019/000440 3)OKUBO Kazuya

Filing Date :10/01/2019 (87) International Publication No :WO 2019/139061 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided are: a pipe-shaped integrally molded article which is formed by molding a polyphenylene sulfide resin composition, and which has, at one or more portions thereof, at least one selected from sections having different shapes, bent sections, and sections having different diameters, the pipe-shaped integrally molded article being characterized in that the total length L (mm) thereof is 1000 or more, and the ratio (L/D) of an outer diameter D (mm) of the pipe-shaped integrally molded article to the total length L (mm) is 20 or more; and a production method for the pipe-shaped integrally molded article. According to the present invention, it is possible to efficiently provide a pipe-shaped integrally molded article having a desired length and including a three-dimensionally complicated shape, by using a PPS resin composition having excellent heat resistance and chemical resistance.

No. of Pages : 43 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27264

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047008628 A (19) INDIA (22) Date of filing of Application :28/02/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : WIRELESS COMMUNICATION APPARATUS AND WIRELESS COMMUNICATION METHOD

(51) International classification :H04L 5/00 (71)Name of Applicant : (31) Priority Document No :201810032375.4 1)HUAWEI TECHNOLOGIES CO., LTD. (32) Priority Date :12/01/2018 Address of Applicant :Huawei Administration Building (33) Name of priority country :China Bantian, Longgang District Shenzhen, Guangdong 518129 P.R. (86) International Application No :PCT/CN2019/071019 China Filing Date :09/01/2019 (72)Name of Inventor : (87) International Publication No :WO 2019/137402 1)JIAO, Shurong (61) Patent of Addition to Application 2)HUA, Meng :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A wireless communication apparatus and a wireless communication method, the wireless communication apparatus comprising: a processing unit, used for determining an index of a virtual resource block in multiple resource block bundles on the basis of a resource block start index of a bandwidth part and the size of the resource block bundles; and a mapping unit, used for performing interleaved mapping on the multiple resource block bundles in order to determine the index of physical resource blocks corresponding to the index of virtual resource blocks; the multiple resource block bundles comprise interleaved mapped initial resource block bundles, the number of virtual resource blocks in the initial resource block bundles being smaller than the size of the resource block bundles. In the embodiments of the present application, as the number of the virtual resource blocks in the initial resource block bundles can be smaller than the size of the resource block bundles, the number of virtual resource blocks in the initial resource block bundles can be flexibly set according to requirements, in order to implement alignment of the initial resource block bundles and an initial precoded resource block set of the bandwidth part, effectively improving the data transmission performance.

No. of Pages : 22 No. of Claims : 25

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27265

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047011739 A (19) INDIA (22) Date of filing of Application :18/03/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PRESSURE-REGULATED BALLOON APPARATUS POSITIONED IN THE CAVITY FORMED IN THE BRAIN AFTER SURGERY

:A61M 25/10, A61M (71)Name of Applicant : (51) International classification 29/02, A61B 17/12 1)ATATRK NIVERSITESI BILIMSEL ARASTIRMA (31) Priority Document No :2018/01062 PROJELERI BIRIMI (32) Priority Date :25/01/2018 Address of Applicant :ATATURK UNIVERSITESI (33) Name of priority country :Turkey KAMPUSU, ERZURUM Turkey (86) International Application No :PCT/TR2019/050033 (72)Name of Inventor : Filing Date :16/01/2019 1)AYDIN, MEHMET DUMLU

(87) International Publication No :WO 2019/147210 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : In particular, the invention relates to a pressure-regulated balloon apparatus (10) used to prevent the brain (B) collapse, to solve negative/positive pressure imbalances to be formed, and to prevent bleeding by pressure with a soft effect to the cavity formed after the brain cyst and tumor surgery.

No. of Pages : 7 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27266

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047013906 A (19) INDIA (22) Date of filing of Application :30/03/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD FOR PRODUCING INFLUENZA HA SPLIT VACCINE

:A61K 39/145, (71)Name of Applicant : (51) International classification C07K 14/11, C12N 1)JAPAN HEALTH SCIENCES FOUNDATION 15/44 Address of Applicant :11-1, Iwamoto-cho 2-chome, Chiyoda- (31) Priority Document No :2017-169230 ku, Tokyo 101-0032 Japan (32) Priority Date :04/09/2017 (72)Name of Inventor : (33) Name of priority country :Japan 1)TAKAHASHI, Yoshimasa (86) International Application No :PCT/JP2018/032537 2)ADACHI, Yu Filing Date :03/09/2018 3)ATO, Manabu

(87) International Publication No :WO 2019/045090 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided is a method for producing an influenza HA split vaccine that produces antibodies that bind to the HA stem region of influenza, which is less likely to undergo antigenic mutation. Acid treatment of the influenza HA split vaccine is performed. An influenza HA split vaccine that produces antibodies that bind to LAH of the HA stem region is obtained by performing acid treatment. This influenza HA split vaccine has excellent protective ability against influenza virus infections of different antigenicity.

No. of Pages : 18 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27267

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047017091 A (19) INDIA (22) Date of filing of Application :21/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CUSTOMIZABLE MASK AND METHOD OF SIZING

(51) International classification :A61M 16/06 (71)Name of Applicant : (31) Priority Document No :62/565,567 1)KONINKLIJKE PHILIPS N.V. (32) Priority Date :29/09/2017 Address of Applicant :High Tech Campus 5, 5656 AE (33) Name of priority country :U.S.A. Eindhoven Netherlands (86) International Application No :PCT/EP2018/075718 (72)Name of Inventor : Filing Date :24/09/2018 1)HAIBACH, Richard, Thomas

(87) International Publication No :WO 2019/063451 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A mask (12) for use in providing a flow of a treatment gas to the airway of a user. The mask includes a frame (14) and a conformable seal which is structured to sealingly engage about at least one of at least a portion of nose or mouth of the user. The frame includes a front face (18) and a concave shaped rear face (20) which faces the user when the mask is disposed on the user's face. The rear face defines a cavity (22) which is structured to receive at least one of a portion of a nose and/or mouth of the user therein. The frame also includes a number of deformable zones (30), each deformable zone being structured to receive a removable insert (32). Each deformable zone is structured to adapt to at least one of a size or shape of the removable insert received therein.

No. of Pages : 15 No. of Claims : 14

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27268

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047017397 A (19) INDIA (22) Date of filing of Application :23/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : VENTRICULAR ASSIST DEVICE

:A61M 1/10, A61M (71)Name of Applicant : (51) International classification 1/12 1)MAGENTA MEDICAL LTD (31) Priority Document No :62/615538 Address of Applicant :Haofeh 1 6092000 Kadima Israel (32) Priority Date :10/01/2018 (72)Name of Inventor : (33) Name of priority country :U.S.A. 1)TUVAL, Yosi (86) International Application No :PCT/IB2019/050186 2)SOHN, Zev Filing Date :10/01/2019 3)SCHWAMMENTHAL, Ehud (87) International Publication No :WO 2019/138350 4)LUBINSKY, Gad

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Apparatus and methods are described including a blood pump (20) configured to be placed inside a body of subject, the blood pump including an impeller (50) that includes proximal and distal bushings (64, 58), and a frame (34) disposed around the impeller, the frame including proximal and distal bearings (116, 118). An axial shaft (92) passes through the proximal and distal bearings (116, 118) of the frame and the proximal and distal bushings (64, 58) of the impeller (50). The impeller (50) defines a radially-constrained configuration in which the impeller (50) is introduced into the subject's body and a non-radially-constrained configuration in which the impeller (50) is configured to pump blood within the subject's body. The impeller (50) changes from its radially-constrained configuration to its non-radially constrained configuration by the distal bushing (58) sliding over the axial shaft (92). Other applications are also described.

No. of Pages : 102 No. of Claims : 78

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27269

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047018417 A (19) INDIA (22) Date of filing of Application :29/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : STETHOSCOPE

(51) International classification :A61B 7/02 (71)Name of Applicant : (31) Priority Document No :62/570302 1)ERDMAN, Frankie Wendell (32) Priority Date :10/10/2017 Address of Applicant :P.O. Box 2242 Fairhope, AL 36533 (33) Name of priority country :U.S.A. U.S.A. (86) International Application No :PCT/US2018/030807 2)CUNNINGHAM BOUNDS, LLC Filing Date :03/05/2018 (72)Name of Inventor : (87) International Publication No :WO 2019/074543 1)FALKNER, Carla W. (61) Patent of Addition to Application 2)PLESSALA, Deneen T. :NA Number 3)HENRICKSEN, Clifford A. :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : In a first embodiment, a stethoscope with a body; a diaphragm; and an integral annular axially compliant suspension is disclosed. The annular axially compliant suspension fits around the diaphragm and inside an inner perimeter of the body. Optionally, a reticulated foam pressure pad with an annular suspension is sealed on the interior or outer diameter of the body and the diaphragm is a very thin foil, preferably made from copper, in order to provide antimicrobial properties. In a second embodiment, a stethoscope with a body and a diaphragm has a flexible enclosure containing an incompressible liquid suspended in the stethoscope body is disclosed. A reticulated foam pressure pad with an annular suspension is sealed on the interior or outer diameter of the body. Optionally, the diaphragm has a cap over a top end of the suspended flexible enclosure, preferably made from copper in order to provide antimicrobial properties.

No. of Pages : 12 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27270

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047018643 A (19) INDIA (22) Date of filing of Application :01/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : IMAGE PROCESSING DEVICE, IMAGE PROCESSING METHOD, AND PROGRAM

(51) International classification :A61B 6/00 (71)Name of Applicant : (31) Priority Document No :2017-196397 1)CANON KABUSHIKI KAISHA (32) Priority Date :06/10/2017 Address of Applicant :30-2, Shimomaruko 3-chome, Ohta-ku, (33) Name of priority country :Japan Tokyo 1468501 Japan (86) International Application No :PCT/JP2018/026121 (72)Name of Inventor : Filing Date :11/07/2018 1)IWASHITA, Atsushi (87) International Publication No :WO 2019/069522 2)TSUKUDA, Akira (61) Patent of Addition to Application 3)TERUI, Kosuke :NA Number 4)TORII, Sota :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An image processing device that comprises: an acquisition unit that acquires low-energy information and high-energy information from a plurality of images obtained by emitting radiation at a subject; a calculation unit that calculates an effective atomic number and a surface density from the low-energy information and the high-energy information; and a generation unit that generates an image that has color information on the basis of the effective atomic number and the surface density.

No. of Pages : 33 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27271

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047018644 A (19) INDIA (22) Date of filing of Application :01/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : MATERIALS AND METHODS FOR INHIBITING TUMOR GROWTH

:A61K 31/198, A61K (71)Name of Applicant : 31/401, A61K 1)UNIVERSITY OF FLORIDA RESEARCH (51) International classification 31/405, A61K FOUNDATION , INCORPORATED 31/4172, A61P 35/00 Address of Applicant :223 Grinter Hall Gainesville, FL 32611 (31) Priority Document No :62/566787 U.S.A. (32) Priority Date :02/10/2017 (72)Name of Inventor : (33) Name of priority country :U.S.A. 1)VIDYASAGAR, Sadasivan (86) International Application No :PCT/US2018/054015 2)GUPTA, Reshu Filing Date :02/10/2018 3)GATTO, Stephen

(87) International Publication No :WO 2019/070750 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The subject invention provides compositions and methods for inhibiting the growth and/or proliferation of cancer cells. The subject invention also provides methods for treating cancer in a subject in need of such treatment by administering a composition described herein. The subject invention can be used to inhibit cancer cell growth by exposing the cells to a composition. The subject invention further provides cancer treatments that may be used in combination with surgery, chemotherapy, and/or radiation therapy.

No. of Pages : 43 No. of Claims : 25

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27272

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047018645 A (19) INDIA (22) Date of filing of Application :01/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BOOSTING DEVICE

:F04B 27/12, F04B (71)Name of Applicant : (51) International classification 39/00 1)SMC CORPORATION (31) Priority Document No :2017-193445 Address of Applicant :14-1, Sotokanda 4-chome, Chiyoda-ku, (32) Priority Date :03/10/2017 Tokyo 1010021 Japan (33) Name of priority country :Japan (72)Name of Inventor : (86) International Application No :PCT/JP2018/036200 1)Hiroyuki ASAHARA Filing Date :28/09/2018 2)Seiichi NAGURA (87) International Publication No :WO 2019/069801 3)Kazutaka SOMEYA

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A boosting device (10) is provided with: a drive unit (12) which is driven under the action of energization; and a boosting mechanism (14) which is connected to the drive unit (12) and which boosts and outputs a pressurized fluid. The boosting mechanism (14) comprises: a rotating body (30) which is connected to a drive shaft (24) of a drive source (18) and includes a slope portion (68); and four pistons (32a to 32d) opposing the rotating body (30) and disposed moveably in an axial direction. The pistons (32a to 32d) are sequentially and continuously pushed in the axial direction by means of the slope portion (68) of the rotating body (30), whereby the pressurized fluid is compressed and boosted in a boosting chamber (48). The pressurized fluid that has been boosted in the boosting chamber (48) is discharged out of an output port (64) through a discharge passageway (66a, 66b) when an exhaust check valve (36) is opened.

No. of Pages : 17 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27273

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047019039 A (19) INDIA (22) Date of filing of Application :05/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : USE OF KEPLERATE TYPE POLYOXYMOLYBDATES FOR DECONTAMINATING AQUATIC ENVIRONMENTS

:C02F 1/72, B01J (71)Name of Applicant : 23/24, B01J 23/28, 1)TECHNISCHE UNIVERSIT„T BERLIN (51) International classification B01J 23/881, C02F Address of Applicant :Strae des 17. Juni 135 10623 Berlin 1/32 Germany (31) Priority Document No :17195084.3 (72)Name of Inventor : (32) Priority Date :05/10/2017 1)DRIESS, Matthias (33) Name of priority country :EPO 2)SCHOM„CKER, Reinhard (86) International Application No :PCT/EP2018/076551 3)SOMENATH, Garai Filing Date :29/09/2018 4)GROSS, Martin (87) International Publication No :WO 2019/068593 5)ACHARJYA, Amitava (61) Patent of Addition to Application 6)SCHWARZE, Michael :NA Number 7)MENEZES, Prashant :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Use of Keplerate type polyoxomolybdates of the general structure Mo72M30, wherein M is selected from the group consisting of Fe, Cr, V or Mo2, for decontaminating aqueous media (water) from inorganic and organic pollutants

No. of Pages : 12 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27274

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047019093 A (19) INDIA (22) Date of filing of Application :05/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ACKNOWLEDGEMENT SIGNALING PROCESSES FOR RADIO ACCESS NETWORKS

:H04L 1/12, H04L (71)Name of Applicant : (51) International classification 1/16, H04L 1/18 1)TELEFONAKTIEBOLAGET LM ERICSSON (PUBL) (31) Priority Document No :NA Address of Applicant :SE-164 83, Stockholm Sweden (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)BALDEMAIR, Robert (86) International Application No :PCT/SE2017/051003 2)CHEN LARSSON, Daniel Filing Date :11/10/2017 3)PARKVALL, Stefan (87) International Publication No :WO 2019/074410 4)CHENG, Jung-Fu

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : There is dislosed a method of operating a user equipment 10 in a radio access network. The method comprises transmitting acknowledgement signaling based on a feedback configuration, the feedback configuration being selected from a set of configured acknowledgement configurations. The disclosure also pertains to related methods and devices.

No. of Pages : 59 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27275

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047019094 A (19) INDIA (22) Date of filing of Application :05/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DISCRETE CARBON NANOTUBES AND DRY LIQUID CONCENTRATES AND FORMULATIONS THEREOF

:C08K 3/04, C08K (71)Name of Applicant : (51) International classification 5/11 1)MOLECULAR REBAR DESIGN, LLC (31) Priority Document No :62/571026 Address of Applicant :13477 Fitzhugh Road, Austin, Texas (32) Priority Date :11/10/2017 78736 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2018/055413 1)PEDDINI, Sateesh Kumar Filing Date :11/10/2018 2)KRUPP, August Charles

(87) International Publication No :WO 2019/075201 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Dry liquid concentrates allow carbon nanotubes to be dispersed in rubber formulations under standard rubber processing conditions. The incorporation of carbon nanotubes can enhance the physical properties of the resulting rubber material in many ways, including creating a more resilient rubber which resists abrasion, tearing, and chipping.

No. of Pages : 40 No. of Claims : 32

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27276

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047019215 A (19) INDIA (22) Date of filing of Application :06/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BIOMETRIC AUTHENTICATION, IDENTIFICATION AND DETECTION METHOD AND DEVICE FOR MOBILE TERMINAL AND EQUIPMENT

(51) International classification :G06F 21/32 (71)Name of Applicant : (31) Priority Document No :201711353642.X 1)ALIBABA GROUP HOLDING LIMITED (32) Priority Date :15/12/2017 Address of Applicant :Fourth Floor, One Capital Place, P.O. (33) Name of priority country :China Box 847, George Town, Grand Cayman KY Cayman Island (86) International Application No :PCT/CN2018/104480 (72)Name of Inventor : Filing Date :07/09/2018 1)FU, Xinyi (87) International Publication No :WO 2019/114337 2)LI, Zhe

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A biometric authentication, identification and detection method and device for a mobile terminal and an electronic device, the method comprising: acquiring sensor data of a mobile terminal when the mobile terminal carries out biometric authentication and identification (S110); and determining whether an attack occurs on the basis of the sensor data and an attack determination model (S120), wherein the attack determination model is obtained by training on the basis of sensor training data.

No. of Pages : 25 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27277

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047019424 A (19) INDIA (22) Date of filing of Application :07/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BALL TOY

:A63B 39/00, A63H (71)Name of Applicant : (51) International classification 1/00 1)MEJJJET HOLDINGS PTY LTD (31) Priority Document No :2017904076 Address of Applicant :9 Robertson Avenue, Margate, QLD (32) Priority Date :10/10/2017 4019 Australia (33) Name of priority country :Australia (72)Name of Inventor : (86) International Application No :PCT/AU2018/051098 1)HOLDEN, Edward

Filing Date :10/10/2018 (87) International Publication No :WO 2019/071309 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A ball toy having a solid, resiliently flexible body is disclosed, The body is penetrated by a bore, wherein bearing means are mounted, defining a rotational axis of the body therein. The bore has a bore closure at each end, mechanical connection means connecting each closure to the bearing means. The body is able to spin on said axis relative to the closures, when the closures are held in a pinching manner by a user. The body is made of a thermoplastic rubber of selected hardness properties, giving it excellent bouncing performance, with unpredictability of bouncing direction resulting from the spinning of the body.

No. of Pages : 12 No. of Claims : 22

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27278

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047019425 A (19) INDIA (22) Date of filing of Application :07/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : FOAMED POLYETHYLENE ARTICLE

(71)Name of Applicant :

1)ABU DHABI POLYMERS COMPANY LIMITED :C08L 23/08, C08L (51) International classification (BOROUGE) LLC 23/04, B32B 27/32 Address of Applicant :Sheikh Khalifa Energy Complex (31) Priority Document No :201711075690.7 Borouge Tower Corniche Road Abu Dhabi, P.O. BOX 6925 (32) Priority Date :06/11/2017 U.A.E. (33) Name of priority country :China 2)BOREALIS AG (86) International Application No :PCT/EP2018/080341 (72)Name of Inventor : Filing Date :06/11/2018 1)VAN HOUCKE, Daniel (87) International Publication No :WO 2019/086710 2)ANTONY, Nisha (61) Patent of Addition to Application :NA 3)SINGH, Raghvendra Number :NA 4)SIONG, Chee Filing Date 5)MALMROS, Peter (62) Divisional to Application Number :NA 6)TIONG KHOON, Ong Filing Date :NA 7)DUAN, Xinrong 8)ZHOU, Xin

(57) Abstract : A polymer composition comprising 35 to 89.9 wt% of a multimodal linear low density polyethylene (LLDPE) having an MFR21MFR2 of 50 to 200, 10 to 50 wt% of a low density polyethylene (LDPE) and 0.1 to 15.0 wt% of foaming agent component based on the total amount (100wt%) of the polymer composition.

No. of Pages : 27 No. of Claims : 23

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27279

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047019584 A (19) INDIA (22) Date of filing of Application :08/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : HIGH VOLTAGE INTERCONNECTION SYSTEM

:B61G 5/10, H02G (71)Name of Applicant : (51) International classification 11/00 1)TYCO ELECTRONICS UK LTD. (31) Priority Document No :17196391.1 Address of Applicant :Faraday Road, Dorcan, Swindon, (32) Priority Date :13/10/2017 Wiltshire SN3 5HH U.K. (33) Name of priority country :EPO (72)Name of Inventor : (86) International Application No :PCT/EP2018/077409 1)JASKIEWICZ, Piotr Filing Date :09/10/2018 2)PHILLPOTTS, Robert

(87) International Publication No :WO 2019/072806 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention relates to a high voltage interconnection system (47) for electrically interconnecting two objects that are movable relative to each other, in particular coupled train cars (1, 3). The invention further relates to an assembly (5), comprising at least two train cars (1, 3) which are coupled with each other. In order to provide a compact and versatile system (47) and assembly (5) for electrically interconnecting two objects that are movable relative to each other, it is intended, according to the invention, that the interconnection system (47) comprises at least one flexible cable(25), at least one connection arrangement (19) for electrically contacting one end (21,23) of the at least one flexible cable (25), and at least one cable holder arrangement (37), the at least one cable holder arrangement (37) being adapted for holding the at least one flexible cable(25) in a slidable manner. For the assembly (5) it is intended that at least one train car (1, 3) is provided with at least one connection arrangement (19) for electrically contacting one end (21, 23) of at least one flexible cable(25), the at least one connection arrangement (19) comprising at least one connection element (27) being fixated to the corresponding train car (1, 3), and wherein at least one flexible cable(25) is electrically connected to the at least one connection arrangement (19) and extends at least towards the other train car (1, 3).

No. of Pages : 17 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27280

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047019585 A (19) INDIA (22) Date of filing of Application :08/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DEVICE THAT CAN BE HELD ON ONE HAND FOR ELECTRICALLY ASSISTED SKIN TREATMENT, ADDITIONAL PART FOR SAID DEVICE AND BLISTER FOR SAID ADDITIONAL PART

(51) International classification :A61N 1/30 (71)Name of Applicant : (31) Priority Document No :10 2017 123 809.3 1)SWISS SPA SYSTEM LTD. (32) Priority Date :12/10/2017 Address of Applicant :288 Des Voeux Road Central, Unit B, (33) Name of priority country :Germany 3/F, Eton Building, Hong Kong, Hong Kong Hongkong(China) (86) International Application No :PCT/EP2018/077796 (72)Name of Inventor : Filing Date :11/10/2018 1)GIMELLI, Bruno (87) International Publication No :WO 2019/073001 2)DOYLE, James N.

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The aim of the invention is to simplify the handling of a skin treatment device (1). This aim is achieved, according to the invention, in that a ring (10), on which a carrier material for an active substance is impregnated, is plugged on the cap (5) of the device, which forms the skin electrode (4). Said carrier material preferably has the shape of a strip (13) and is stretched over the head of the cap (5), which is placed on the skin. As a result, an exactly metered quantity of active substance is located between the skin electrode (4) and the skin. Since the arcs (12) of the oval ring (10) are exposed, the latter can be gripped there without the hands being smeared with the cream carrying the active substance. The rings (10) having the impregnated carrier materials are provided in blisters (20).

No. of Pages : 12 No. of Claims : 18

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27281

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047019622 A (19) INDIA (22) Date of filing of Application :08/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND DEVICE FOR DATA TRANSMISSION

:H04W 4/20, H04W (71)Name of Applicant : (51) International classification 28/02 1)BEIJING XIAOMI MOBILE SOFTWARE CO., LTD. (31) Priority Document No :NA Address of Applicant :No.018, Floor 8, Building 6, Yard 33, (32) Priority Date :NA Middle Xierqi Road, Haidian District Beijing 100085 China (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :PCT/CN2017/105661 1)HONG, Wei

Filing Date :11/10/2017 (87) International Publication No :WO 2019/071462 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided in the present disclosure are a method and device for data transmission, the method being used with a terminal and comprising: when uplink data to be transmitted to a base station is detected, saving the uplink data in a designated cache; when a remote line access unit (RLAU) is started, reading the uplink data from the designated cache; transmitting the uplink data to the base station by means of a request signaling corresponding to the RLAU such that the base station acquires the uplink data from the request signaling. Therefore, the present disclosure may implement a combination of a RLAU procedure and data transmission such that a base station may receive uplink data that is transmitted by a terminal in an inactive state; meanwhile, the present disclosure may further improve the efficiency of data transmission.

No. of Pages : 28 No. of Claims : 14

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27282

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047019781 A (19) INDIA (22) Date of filing of Application :11/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : MULTI-LAYER NEURAL NETWORK PROCESSING BY A NEURAL NETWORK ACCELERATOR USING HOST COMMUNICATED MERGED WEIGHTS AND A PACKAGE OF PER-LAYER INSTRUCTIONS

:G06N 3/063, G06N (71)Name of Applicant : (51) International classification 3/04 1)XILINX, INC. (31) Priority Document No :15/785800 Address of Applicant :Attn: Legal Dept. 2100 Logic Drive San (32) Priority Date :17/10/2017 Jose, CA 95124 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2018/056112 1)NG, Aaron Filing Date :16/10/2018 2)DELAYE, Elliott (87) International Publication No :WO 2019/079319 3)GHASEMI, Ehsan (61) Patent of Addition to Application 4)TENG, Xiao :NA Number 5)ZEJDA, Jindrich :NA Filing Date 6)WU, Yongjun (62) Divisional to Application Number :NA 7)SETTLE, Sean Filing Date :NA 8)SIRASAO, Ashish

(57) Abstract : In the disclosed methods and systems for processing in a neural network system, a host computer system (402) writes (602) a plurality of weight matrices associated with a plurality of layers of a neural network to a memory (226) shared with a neural network accelerator (238). The host computer system further assembles (610) a plurality of per-layer instructions into an instruction package. Each per-layer instruction specifies processing of a respective layer of the plurality of layers of the neural network, and respective offsets of weight matrices in a shared memory. The host computer system writes (612, 614) input data and the instruction package to the shared memory. The neural network accelerator reads (702) the instruction package from the shared memory and processes (702- 712) the plurality of per-layer instructions of the instruction package.

No. of Pages : 27 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27283

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047020169 A (19) INDIA (22) Date of filing of Application :13/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ALIAS REJECTION THROUGH CHARGE SHARING

:H03M 1/06, H03M (71)Name of Applicant : (51) International classification 1/46 1)QUALCOMM INCORPORATED (31) Priority Document No :62/607309 Address of Applicant :5775 Morehouse Drive, QUALCOMM (32) Priority Date :18/12/2017 Incorporated, ATTN: International IP Administration, San Diego, (33) Name of priority country :U.S.A. California 92121-1714 U.S.A. (86) International Application No :PCT/US2018/061647 (72)Name of Inventor : Filing Date :16/11/2018 1)BAKER, Sean (87) International Publication No :WO 2019/125678 2)ALLADI, Dinesh Jagannath (61) Patent of Addition to Application 3)SIVAKUMAR, Balasubramanian :NA Number 4)YAMAMOTO, Kentaro :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An example apparatus is disclosed for alias rejection through charge sharing. The apparatus includes a filter-sampling network, a digital-to-analog converter, and a charge-sharing switch. The filter-sampling network includes a capacitor and a first switch, which is coupled between an input node and the capacitor. The filter-sampling network is configured to connect or disconnect the capacitor to or from the input node via the first switch. The digital-to-analog converter includes a capacitor array and a second switch, which is coupled between the input node and the capacitor array. The capacitor array is coupled between the second switch and a charge- sharing node. The digital-to-analog converter is configured to connect or disconnect the capacitor array to or from the input node via the second switch. The charge-sharing switch is coupled between the charge-sharing node and the capacitor and is configured to connect or disconnect the capacitor to or from the digital-to-analog converter.

No. of Pages : 25 No. of Claims : 30

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27284

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047020586 A (19) INDIA (22) Date of filing of Application :15/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PVC COMPOSITIONS, FILMS, LAMINATES AND RELATED METHODS

:C08F 14/06, C08F (71)Name of Applicant : 114/06, C09J 7/24, 1)AVERY DENNISON CORPORATION (51) International classification C09D 127/06, B32B Address of Applicant :207 Goode Avenue, Glendale, 27/08 California 91203 U.S.A. (31) Priority Document No :62/585,973 (72)Name of Inventor : (32) Priority Date :14/11/2017 1)HANNINGTON, Michael E. (33) Name of priority country :U.S.A. 2)KLICH, Paul R. (86) International Application No :PCT/US2018/060846 3)ALESSANDRO, Mark

Filing Date :13/11/2018 (87) International Publication No :WO 2019/099411 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Polyvinyl chloride compositions and films formed therefrom are described which exhibit improved printability and resistance to weathering. The compositions generally comprise polyvinyl chloride having a certain molecular weight, at least one bio-based plasticizer, at least one UV absorber, at least one hindered amine light stabilizer, at least one heat stabilizer, and at least one acid scavenger. Also described are various vinyl-based laminates using the films which can be for example adhesive laminates. Also described are methods of producing the noted films and laminates.

No. of Pages : 19 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27285

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047020889 A (19) INDIA (22) Date of filing of Application :18/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PARALLEL SCHEDULER ARCHITECTURE

:H04B 7/0452, H04B (71)Name of Applicant : (51) International classification 7/06, H04W 72/12 1)NOKIA TECHNOLOGIES OY (31) Priority Document No :NA Address of Applicant :Karakaari 7 02610 Espoo Finland (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)SEN, Moushumi (86) International Application No :PCT/EP2017/077441 2)KROENER, Hans Filing Date :26/10/2017 3)KALYANASUNDARAM, Suresh (87) International Publication No :WO 2019/081024 4)HERZOG, Alois

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : According to an aspect, there is provided a method for performing in an access node time- and frequency scheduling for a cell comprising two or more subcells. The method comprises the following steps. The access node selects a set of one or more active beams for each of at least two of subcells comprised in the two or more subcells from beams produced by an antenna array of the access node. The access node performs time-scheduling for the cell in common. Finally, the access node performs frequency- scheduling separately and in parallel for each of the at least two subcells for transmission using a corresponding set of one or more active beams.

No. of Pages : 27 No. of Claims : 23

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27286

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047021410 A (19) INDIA (22) Date of filing of Application :21/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SIGNALING RADIO TRANSMISSION MAPPING TYPES

(51) International classification :H04L 5/00 (71)Name of Applicant : (31) Priority Document No :62/590466 1)TELEFONAKTIEBOLAGET LM ERICSSON (PUBL) (32) Priority Date :24/11/2017 Address of Applicant :Torshamnsgatan 23, S-164 83, (33) Name of priority country :U.S.A. Stockholm, Sweden Sweden (86) International Application No :PCT/SE2018/051208 (72)Name of Inventor : Filing Date :23/11/2018 1)PARKVALL, Stefan (87) International Publication No :WO 2019/103687 2)BALDEMAIR, Robert

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : According to some embodiments, a wireless device is configured to receive resource allocation information from a network node. The wireless device comprises a radio interface and processing circuitry configured to receive radio resource allocation information for a wireless transmission. The radio resource allocation information comprises one or more time-domain resources for the wireless transmission and a mapping type for the wireless transmission. The mapping type refers to a reference signal placement within the wireless transmission (e.g., demodulation reference signal (DMRS) mapping Type A or Type B). The radio interface and processing circuitry are further configured to interpret the received radio resource allocation information to determine a mapping type for the wireless transmission.

No. of Pages : 34 No. of Claims : 34

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27287

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047021412 A (19) INDIA (22) Date of filing of Application :21/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : QUICK COUPLER CONNECTION SYSTEM FOR CONSTRUCTION MACHINE

(51) International classification :E02F 3/36 (71)Name of Applicant : (31) Priority Document No :10-2017-0173065 1)DAEMO ENGINEERING CO.,LTD., (32) Priority Date :15/12/2017 Address of Applicant :(Jangji-dong, Wirye 22 Danji) 2206- (33) Name of priority country :Republic of Korea 901, 163, Wiryegwangjang-ro, Songpa-gu, Seoul 05848, Republic (86) International Application No :PCT/KR2018/010662 of Korea Republic of Korea Filing Date :12/09/2018 (72)Name of Inventor : (87) International Publication No :WO 2019/117431 1)KIM, Ho Chul

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a quick coupler connection system for a construction machine, the connection system having an improved structure so as to automatically adjust the coupling position of an operating rod and a connecting block such that a quick coupler main body and a heavy equipment attachment device are quickly and safely coupled, and to allow a connection structure of the quick coupler main body and the attachment device to be achieved by a pin and hook coupling method in a three-point support manner such that assemblability is improved, firm connecting power can be obtained, and operating noise can be reduced.

No. of Pages : 25 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27288

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047021460 A (19) INDIA (22) Date of filing of Application :21/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BRACHYTHERAPY AFTERLOADER DEVICE

(51) International classification :A61N 5/10 (71)Name of Applicant : (31) Priority Document No :17198449.5 1)KONINKLIJKE PHILIPS N.V. (32) Priority Date :26/10/2017 Address of Applicant :High Tech Campus 5, 5656 AE (33) Name of priority country :EPO Eindhoven Netherlands (86) International Application No :PCT/EP2018/078667 (72)Name of Inventor : Filing Date :19/10/2018 1)HAUTVAST, Guillaume Leopold Theodorus Frederik

(87) International Publication No :WO 2019/081357 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A brachytherapy after loader device (100), comprises at least one transmit wire (102) that is suitable for being inserted and driven in an advance or retract motion in an external first delivery channel (103) and for delivering drive energy to a test field source (104), which is arranged at a distal end region of the transmit wire, for generating a magnetic test field; at least one receive wire (106) that is suitable for being inserted and driven in an advance or retract motion in an external second delivery channel (105) for a measurement of the magnetic test field, the receive wire having a transducer (108) that is configured to detect magnetic-field changes in the magnetic test field; and a wire driving unit (110) which is configured to controllably advance or retract the transmit wire and the receive wire in response to a corresponding test drive control signal (112).

No. of Pages : 18 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27289

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047021871 A (19) INDIA (22) Date of filing of Application :25/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD OF OPTIMIZING MACHINING SIMULATION CONDITION, MACHINING SIMULATION DEVICE, MACHINING SIMULATION SYSTEM AND PROGRAM

:G05B 19/4069, (71)Name of Applicant : (51) International classification B23K 26/00 1)MITSUBISHI HEAVY INDUSTRIES MACHINE TOOL (31) Priority Document No :2017-231018 CO., LTD. (32) Priority Date :30/11/2017 Address of Applicant :130, Rokujizo, Rittoshi, Shiga 5203080, (33) Name of priority country :Japan Japan Japan (86) International Application No :PCT/JP2018/016317 (72)Name of Inventor : Filing Date :20/04/2018 1)GOYA Saneyuki (87) International Publication No :WO 2019/106859 2)WATANABE Toshiya (61) Patent of Addition to Application 3)NIITANI Haruhiko :NA Number 4)FUJITA Yoshihito :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : This method of optimizing a machining simulation condition includes: a step for receiving a setting condition of a machine tool at the time of executing a prescribed machining detail; a step for calculating a first machining result that is assumed when the machine tool performs machining under the received setting condition; a step for acquiring a second machining result that is a machining result when the machine tool performs machining under the received setting condition; and a step for evaluating a degree of coincidence between the first machining result and the second machining result, wherein, the calculation of the first machining result is repeatedly performed, while changing a precondition of the calculation, until the degree of coincidence reaches a prescribed threshold or higher.

No. of Pages : 58 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27290

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047021907 A (19) INDIA (22) Date of filing of Application :26/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DNASE VARIANTS•

(51) International classification :C12N 9/22 (71)Name of Applicant : (31) Priority Document No :17198946.0 1)NOVOZYMES A/S (32) Priority Date :27/10/2017 Address of Applicant :36,Krogshoejvej,Bagsvaerd,Denmark (33) Name of priority country :EPO ,DK-2880 Denmark (86) International Application No :PCT/EP2018/079438 (72)Name of Inventor : Filing Date :26/10/2018 1)BEIER, Lars (87) International Publication No :WO 2019/081721 2)GORI, Klaus (61) Patent of Addition to Application 3)OESTERGAARD, Lars,Henrik, :NA Number 4)GIGER, Lars :NA Filing Date 5)JOHANSEN, Annette, Helle (62) Divisional to Application Number :NA 6)ABEL, Gernot, J

Filing Date :NA

(57) Abstract : The present invention relates to polypeptide variants and methods for obtaining variants. The present invention also relates to polynucleotides encoding the variants; nucleic acid constructs, vectors, and host cells comprising the polynucleotides; and methods of using the variants.

No. of Pages : 155 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27291

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047021919 A (19) INDIA (22) Date of filing of Application :26/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A BOILER SYSTEM WITH A SUPPORT CONSTRUCTION

:F22B 37/14, F22B (71)Name of Applicant : (51) International classification 37/20, F22B 37/24 1)SUMITOMO SHI FW ENERGIA OY (31) Priority Document No :NA Address of Applicant :Metsnneidonkuja 10, 02130 Espoo, (32) Priority Date :NA Finland Finland (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :PCT/EP2017/077987 1)LANKINEN, Pentti

Filing Date :01/11/2017 (87) International Publication No :WO 2019/086112 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A boiler system (10), comprising a support construction (42) and a furnace (12) supported to the support construction at a vertically middle section of the furnace, the furnace being enclosed by water tube walls comprising two side walls (18) and two end walls (20), a roof (16) and a bottom (14), the side walls having a total height (H) from the bottom to the roof, wherein each of the two side walls comprises a vertical upper portion (30) that extends from the roof to a level of 30-70 % of the height (H), a lower portion (32) that extends from the bottom to a level of 30-70 % of the height (H) and has a vertical upper portion (36), and an in downward direction outwards bent intermediate portion (38) at a level between the upper portion of the side wall and the vertical upper portion of the lower portion of the side wall, wherein the support construction (42) comprises horizontal wall supporting beams (48) that are arranged parallel to the side walls (18) at a level below the roof (16) of the furnace and directly above the vertical upper portions (36) of the lower portions (32) of the two side walls (18), and the furnace (12) is supported to the support construction (42) by having the intermediate portions (38) of the side walls connected to adjacent horizontal wall supporting beams (48) so as to balance vertical loads of the furnace.

No. of Pages : 18 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27292

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047021920 A (19) INDIA (22) Date of filing of Application :26/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PHOSPHORUS-CONTAINING MOLECULAR SIEVE, ITS PREPARATION AND APPLICATION THEREOF

:C01B 39/24, B01J (71)Name of Applicant : (51) International classification 29/82, C10G 47/16 1)CHINA PETROLEUM & CHEMICAL CORPORATION (31) Priority Document No :201711046549.4 Address of Applicant :No.22 Chaoyangmen North Street, (32) Priority Date :31/10/2017 Chaoyang District, Beijing, 100728, China China (33) Name of priority country :China 2)RESEARCH INSTITUTE OF PETROLEUM (86) International Application No :PCT/CN2018/111166 PROCESSING, SINOPEC Filing Date :22/10/2018 (72)Name of Inventor : (87) International Publication No :WO 2019/085777 1)MAO, Yichao (61) Patent of Addition to Application 2)LI, Mingfeng :NA Number 3)LONG, Xiangyun :NA Filing Date 4)ZHANG, Runqiang (62) Divisional to Application Number :NA 5)ZHAO, Yang

Filing Date :NA

(57) Abstract : A phosphorus-containing molecular sieve, a preparation method therefor, and an application thereof are provided. The molecular sieve has a phosphorus content of about 0.3-5% by weight of oxide, a pore volume of about 0.2-0.95 mL/g, and a ratio of Br¸nsted acid to Lewis acid of about 2-10. The molecular sieve has a high ratio of Br¸nsted acid to Lewis acid, thereby exhibiting higher hydrocracking activity and ring opening selectivity when used to prepare hydrocracking catalysts.

No. of Pages : 53 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27293

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047022025 A (19) INDIA (22) Date of filing of Application :26/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DATA TRANSMISSION METHOD, NETWORK DEVICE, AND SERVER

(51) International classification :H04W 48/08 (71)Name of Applicant : (31) Priority Document No :NA 1)HUAWEI TECHNOLOGIES CO., LTD. (32) Priority Date :NA Address of Applicant :Huawei Administration Building (33) Name of priority country :NA Bantian, Longgang Shenzhen, Guangdong 518129 China (86) International Application No :PCT/CN2017/110971 (72)Name of Inventor : Filing Date :14/11/2017 1)LI, Chenwan (87) International Publication No :WO 2019/095122 2)LIN, Bo (61) Patent of Addition to Application 3)WANG, Yan :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present application provides a transmission method, a network device, and a server. The method comprises: a network device receives a first transmission parameter sent by a server and used for transmitting auxiliary data, the first transmission parameter comprising configuration information and/or priority information, and the configuration information being used for indicating a transmission period of each system message in one or more system messages and/or data volume that can be carried by each system message in the one or more system messages; the network device sends first configuration information to the server according to the first transmission parameter, the first configuration information being used for indicating a transmission period of a first system message and data volume that can be carried by the first system message, and the one or more system messages comprising the first system message. According to the transmission method provided by embodiments of the present application, by sending to a network device by a server a transmission parameter used for transmitting auxiliary data, the process of broadcasting auxiliary data can be optimized.

No. of Pages : 79 No. of Claims : 30

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27294

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047022026 A (19) INDIA (22) Date of filing of Application :26/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SIGNAL TRANSCEIVING DEVICE, AND BASE STATION

:H04B 1/40, H04Q (71)Name of Applicant : (51) International classification 1/02, H01Q 21/00 1)HUAWEI TECHNOLOGIES CO., LTD. (31) Priority Document No :201711132017.2 Address of Applicant :Huawei Administration Building (32) Priority Date :15/11/2017 Bantian, Longgang District Shenzhen, Guangdong 518129 China (33) Name of priority country :China (72)Name of Inventor : (86) International Application No :PCT/CN2018/092334 1)XUE, Yusheng Filing Date :22/06/2018 2)SHENG, Haiqiang (87) International Publication No :WO 2019/095691 3)QI, Meiqing

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Disclosed is a signal transceiving device, comprising: at least one plug-in card and a backplate, wherein the plug-in card comprises two waveguide plates, a multi-layer circuit board sandwiched between the two waveguide plates, an antenna array mounted on the two waveguide plates, and a first waveguide interface, a waveguide groove is disposed on one side of the two waveguide plates facing the multi-layer circuit board, and a metal layer corresponding to the waveguide groove is disposed on both sides of the multi-layer circuit board, correspondence means that the metal layer and the waveguide groove cooperate with each other to form a double-layer waveguide channel respectively located on both sides of the multi-layer circuit board and connected to the antenna array and the first waveguide interface, a second waveguide interface is disposed on the backboard; the waveguide connection between the plug-in card and the backplate are realized by means of docking between the first waveguide interface and the second waveguide interface. Disclosed are a signal transceiving device, and a base station. By means of the application, the integration degree of a waveguide structure is improved, the space utilization rate of a signal transceiving device is improved, and at the same time, heat dissipation of the signal transceiving device is facilitated.

No. of Pages : 31 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27295

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047022219 A (19) INDIA (22) Date of filing of Application :27/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : "USER EQUIPMENT AND ACCESS DEVICE"

(51) International classification :H04L 5/00 (71)Name of Applicant : (31) Priority Document No :201711148365.9 1)HUAWEI TECHNOLOGIES CO., LTD. (32) Priority Date :17/11/2017 Address of Applicant :Huawei Administration Building, (33) Name of priority country :China Bantian, Longgang District, Shenzhen, Guangdong 518129, P. R. (86) International Application No :PCT/CN2018/112255 China P.R. China Filing Date :27/10/2018 (72)Name of Inventor : (87) International Publication No :WO 2019/095969 1)JIN, Huangping (61) Patent of Addition to Application 2)LIU, Yong :NA Number 3)WU, Ye :NA Filing Date 4)HAN, Wei

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Embodiments of the present invention provide a user equipment, comprising a transceiver module used for receiving configuration information, the configuration information being used for configuring at least one PRB binding size; and a processing module used for determining a PRG size according to the at least one PRB binding size. The embodiments of the present invention further provide an access device. According to the technical solution provided by the embodiments of the present invention, the PRG size is configured by configuring the PRB binding size. In this way, there is no need to set dedicated signaling for configuring the PRG size. Therefore, the present invention facilitates reducing signaling overheads introduced by configuring a PRG size.

No. of Pages : 29 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27296

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047022443 A (19) INDIA (22) Date of filing of Application :28/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DISPLAY METHOD AND DISPLAY DEVICE

(71)Name of Applicant : 1)BOE TECHNOLOGY GROUP CO., LTD. Address of Applicant :No.10 Jiuxianqiao Rd., Chaoyang District, Beijing 100015 China 2)BEIJING BOE OPTOELECTRONICS TECHNOLOGY (51) International classification :G02B 27/01 CO., LTD. (31) Priority Document No :201810283223.1 (72)Name of Inventor : (32) Priority Date :02/04/2018 1)SUN, Yukun (33) Name of priority country :China 2)WANG, Xuefeng (86) International Application No :PCT/CN2019/070091 3)MIAO, Jinghua Filing Date :02/01/2019 4)LI, Wenyu (87) International Publication No :WO 2019/192229 5)PENG, Jinbao (61) Patent of Addition to Application 6)ZHAO, Bin :NA Number 7)WANG, Lixin :NA Filing Date 8)LI, Xi (62) Divisional to Application Number :NA 9)FAN, Qingwen Filing Date :NA 10)SUO, Jianwen

11)LIU, Yali 12)LEI, Yu 13)WANG, Yakun 14)ZHANG, Hao 15)CHEN, Lili

(57) Abstract : ABSTRACT DISPLAY METHOD AND DISPLAY DEVICE A display method and a display device are provided. The display method may be applied to a display device having a lens unit (2) and a display unit (1) for normal display, and may include steps of: detecting a first distance (S61) between the lens unit (2) and the display unit (1); calculating correction information according to the first distance and transmitting the correction information to the display unit (1) (S62A); and displaying a corrected image by the display unit (1) according to the correction information, so that the corrected image is converged into eyes of a user via the lens unit (2), wherein the corrected image is obtained by correcting an original image according to the first distance (S63A). [FIGURE 6]

No. of Pages : 20 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27297

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047022530 A (19) INDIA (22) Date of filing of Application :29/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : GROUPING AND USE OF SHORT SEQUENCE SIGNALS

(51) International classification :H04L 27/26 (71)Name of Applicant : (31) Priority Document No :PCT/CN2017/110525 1)ZTE CORPORATION (32) Priority Date :10/11/2017 Address of Applicant :ZTE Plaza, Keji Road South, HiTech (33) Name of priority country :China Industrial Park, Nanshan, Shenzhen, Guangdong 518057, China. (86) International Application No :PCT/CN2018/076298 China Filing Date :11/02/2018 (72)Name of Inventor : (87) International Publication No :WO 2019/091014 1)LIANG, Chunli (61) Patent of Addition to Application 2)XIA, Shuqiang :NA Number 3)ZUO, Zhisong :NA Filing Date 4)JIANG, Chuangxin

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : New sequences have been proposed and/or adopted for short Physical Uplink Control Channel communications between base stations and UEs. In an exemplary embodiment, a UE communicates with a base station based on sequence groups that include the new sequences, where the new sequences are allocated to different sequence groups based, at least in part, on correlations with other existing sequences included in individual sequence groups.

No. of Pages : 27 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27298

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047022643 A (19) INDIA (22) Date of filing of Application :29/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DIVERSE REDUNDANCY APPROACH FOR SAFETY CRITICAL APPLICATIONS

(51) International classification :G06T 1/20 (71)Name of Applicant : (31) Priority Document No :15/850,967 1)QUALCOMM INCORPORATED (32) Priority Date :21/12/2017 Address of Applicant : International IP Administration, 5775 (33) Name of priority country :U.S.A. Morehouse Drive, San Diego, California 92121-1714 U.S.A. (86) International Application No :PCT/US2018/062898 (72)Name of Inventor : Filing Date :28/11/2018 1)JONG, Alex Kwang Ho (87) International Publication No :WO 2019/125714 2)YUN, Jay Chunsup (61) Patent of Addition to Application 3)KIM, Donghyun :NA Number 4)GULATI, Rahul :NA Filing Date 5)JOHNSON, Brendon Lewis (62) Divisional to Application Number :NA 6)GRUBER, Andrew Evan

Filing Date :NA

(57) Abstract : A graphics processing unit (GPU) of a GPU subsystem of a computing device operates in a first rendering mode to process graphics data to produce a first image. The GPU operates in a second rendering mode to process the graphics data to produce a second image. The computing device detects whether a fault has occurred in the GPU subsystem based at least in part on comparing the first image with the second image.

No. of Pages : 36 No. of Claims : 30

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27299

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047022644 A (19) INDIA (22) Date of filing of Application :29/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : INDICATION SIGNAL CONFIGURATION METHOD AND DEVICE

(51) International classification :H04W 74/04 (71)Name of Applicant : (31) Priority Document No :NA 1)HUAWEI TECHNOLOGIES CO., LTD. (32) Priority Date :NA Address of Applicant :Huawei Administration Building, (33) Name of priority country :NA Bantian, Longgang District Shenzhen, Guangdong 518129 China (86) International Application No :PCT/CN2017/111761 (72)Name of Inventor : Filing Date :17/11/2017 1)TIE, Xiaolei (87) International Publication No :WO 2019/095340 2)JI, Tong (61) Patent of Addition to Application 3)JIN, Zhe :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An indication signal configuration method and device, relating to the technical field of communications, the method comprising: A network device sends first configuration information and second configuration information, and sends a first indication signal over a first carrier and a second indication signal over a second carrier, the first configuration information being used for indicating the duration of the first indication signal corresponding to the first carrier and the second configuration information being used for indicating the duration of the second indication signal corresponding to the second carrier, a first terminal device being a terminal device needing to receive the first indication signal and a second terminal device being a terminal device needing to receive the second indication signal.

No. of Pages : 54 No. of Claims : 30

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27300

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047022645 A (19) INDIA (22) Date of filing of Application :29/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : "SESSION CONTEXT HANDLING METHOD, NETWORK ELEMENT, AND TERMINAL DEVICE"

(51) International classification :H04W 36/00 (71)Name of Applicant : (31) Priority Document No :201711168842.8 1)HUAWEI TECHNOLOGIES CO., LTD. (32) Priority Date :21/11/2017 Address of Applicant :Huawei Administration Building, (33) Name of priority country :China Bantian, Longgang District Shenzhen, Guangdong 518129 P.R. (86) International Application No :PCT/CN2018/116637 China Filing Date :21/11/2018 (72)Name of Inventor : (87) International Publication No :WO 2019/101092 1)CHEN, Zhongping (61) Patent of Addition to Application 2)WANG, Yuan :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present application relates to the technical field of wireless communications, and in particular, to a session context processing method, network elements, and a terminal device. The method comprises: a session management network element receives a first message from a mobility management network, and requests to establish a session for a terminal device, the first message carrying the identifier of a data network; the session management network element obtains capability information of the data network according to the identifier of the data network; if the capability information of the data network is that the data network supports a non-IP type session, the session management network element generates a non-IP type session context according to an Ethernet type or unstructured type session context of the terminal device.

No. of Pages : 39 No. of Claims : 44

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27301

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047022790 A (19) INDIA (22) Date of filing of Application :30/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : REMAINING MINIMUM SYSTEM INFORMATION COMMUNICATION METHOD AND RELATED APPARATUS

:H04L 5/00, H04W (71)Name of Applicant : (51) International classification 28/02 1)HUAWEI TECHNOLOGIES CO., LTD. (31) Priority Document No :201711148422.3 Address of Applicant :Huawei Administration Building (32) Priority Date :17/11/2017 Bantian, Longgang Shenzhen, Guangdong 518129 China (33) Name of priority country :China (72)Name of Inventor : (86) International Application No :PCT/CN2018/116181 1)GAO, Kuandong Filing Date :19/11/2018 2)HUANG, Huang (87) International Publication No :WO 2019/096302 3)YAN, Mao (61) Patent of Addition to Application 4)SONG, Xinghua :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present application provides an RMSI communication method and a related apparatus. The communication method comprises: a terminal device determines a location of an RMSI detection window corresponding to the terminal device according to offset information, a time index of the RMSI detection window corresponding to the terminal device, and a time duration of the RMSI detection window corresponding to the terminal device, the offset information being determined according to an offset between a reference location of the RMSI detection window within an RMSI detection period and a first RMSI detection window within the RMSI detection period and the reference location of the RMSI detection window within the RMSI detection period; and the terminal device receives RMSI according to the location of the RMSI detection window. According to the RMSI communication method and the related apparatus provided in the present application, RMSI can be transmitted.

No. of Pages : 41 No. of Claims : 18

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27302

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023047 A (19) INDIA (22) Date of filing of Application :02/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BEVERAGE DISPENSING SYSTEM

(51) International classification :B67D 1/12 (71)Name of Applicant : (31) Priority Document No :15/845,766 1)PEPSICO, INC. (32) Priority Date :18/12/2017 Address of Applicant :700 Anderson Hill Road, Purchase, (33) Name of priority country :U.S.A. New York-10577 U.S.A. (86) International Application No :PCT/US2018/066135 (72)Name of Inventor : Filing Date :18/12/2018 1)KAROL, Sam (87) International Publication No :WO 2019/126102 2)BALSTAD, Robert W. (61) Patent of Addition to Application 3)ROMANO, Anthony :NA Number 4)PRAVATO, Alberto :NA Filing Date 5)RONCATO, Alessandro

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method of determining a sold-out state of a beverage dispenser is provided. The method includes providing a beverage dispenser including a pump having a gas exhaust port, a dispensing valve, and a sensor disposed on the pump gas exhaust port. The method may include activating the beverage dispenser to dispense a beverage through the dispensing valve and during the activating, sensing a gas exhaust pattern of the pump. The method may also include generating a signal based on the sensed gas exhaust pattern and determining whether the beverage dispenser is in a normal-pour state or a sold-out state. The method may also include providing feedback about the sold-out state to a user interface of the beverage dispenser.

No. of Pages : 25 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27303

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023130 A (19) INDIA (22) Date of filing of Application :02/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BONE SUBSTITUTE MATERIAL

:A61L 27/12, A61L (71)Name of Applicant : (51) International classification 27/32, A61L 27/58 1)GEISTLICH PHARMA AG (31) Priority Document No :17207235.7 Address of Applicant :Bahnhofstrasse 40, 6110 Wolhusen (32) Priority Date :14/12/2017 Switzerland (33) Name of priority country :EPO (72)Name of Inventor : (86) International Application No :PCT/EP2018/084783 1)ZIHLMANN, Claudio Filing Date :13/12/2018 2)BUFLER, Michael

(87) International Publication No :WO 2019/115704 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention relates to: -a biphasic calcium phosphate/hydroxyapatite (CAP/HAP) bone substitute material comprising a sintered CAP core and a closed epitactically grown layer of nanocrystalline HAP deposited on the external surface of the sintered CAP core, wherein the closed epitactically grown layer of nanocrystalline HAP deposited on the external surface of the sintered CAP core has a homogeneous coarse external surface comprising flat crystal platelets, which shows an enhanced osteogenic response, and -a process of preparation thereof comprising the steps of a)preparing a sintered CAP core material, b)immersing the sintered CAP core material in a buffer solution containing to 90 % of a short-chain aliphatic alcohol at a temperature between 10°C and 0°C to start the transformation process of CAP to HAP whereby a closed epitactically grown layer of nanocrystalline hydroxyapatite will be formed on the sintered CAP core material surface,whereby the epitactically grown nanocrystals have the same size and morphology as human bone mineral, wherein the closed epitactically grown layer of nanocrystalline HAP formed on the sintered CAP core material surface has a homogeneous coarse external surface comprising flat crystal platelets, c)stopping the transformation by separating solid material from the aqueous solution at a time when a closed coating of at least one nanocrystalline layer of HAP is present but before the transformation process is finished completely, and d) optionally sterilizing the separated material coming from step c).

No. of Pages : 31 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27304

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023181 A (19) INDIA (22) Date of filing of Application :02/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMPUTER DEVICE HAVING VARIABLE DISPLAY OUTPUT BASED ON USER INPUT WITH VARIABLE TIME AND/OR PRESSURE PATTERNS

(51) International classification :G06F 3/0488 (71)Name of Applicant : (31) Priority Document No :15/870,112 1)MICROSOFT TECHNOLOGY LICENSING, LLC (32) Priority Date :12/01/2018 Address of Applicant :One Microsoft Way Redmond, (33) Name of priority country :U.S.A. Washington 98052-6399 U.S.A. (86) International Application No :PCT/US2018/067768 (72)Name of Inventor : Filing Date :27/12/2018 1)MUMMIDI, Lakshmi Narayana

(87) International Publication No :WO 2019/139784 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A computer device and method are configured to receive a user input across a plurality of points on a display surface of a user interface device. The device and method detect the user input and measure an amount of an input value at each of the plurality of points. Additionally, the device and method generate and display a display output based on a predefined programmable action corresponding to the amount of the input value at at least one of the respective points varying relative to the amount of the input value at one or more of other ones of the respective points.

No. of Pages : 13 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27305

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023182 A (19) INDIA (22) Date of filing of Application :02/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BIT-ACCURATE-TRACING ANALYSIS WITH APPLIED MEMORY REGION LIFETIMES

(51) International classification :G06F 11/36 (71)Name of Applicant : (31) Priority Document No :15/865,699 1)MICROSOFT TECHNOLOGY LICENSING, LLC (32) Priority Date :09/01/2018 Address of Applicant :One Microsoft Way Redmond, (33) Name of priority country :U.S.A. Washington 98052-6399 U.S.A. (86) International Application No :PCT/US2018/066103 (72)Name of Inventor : Filing Date :18/12/2018 1)GABRYJELSKI, Henry (87) International Publication No :WO 2019/139739 2)MOLA, Jordi

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Detecting and providing notice of non-faulting memory accesses during prior execution of an application based on a replay-able trace of the application's execution. Embodiments include replaying portion(s) of prior execution of the application from a replay-able trace the application's prior execution, while tracking lifetime of memory region(s) used by the application. Based on tracking lifetime of the memory region, non-faulting but improper memory access(es) by the application during its prior execution are detected. Notification of these non-faulting but improper memory access(es) are provided at a user interface and/or to a software component.

No. of Pages : 24 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27306

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023349 A (19) INDIA (22) Date of filing of Application :03/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : UPLINK CONTROL INFORMATION PIGGYBACKING IN WIRELESS SYSTEMS

:H04L 5/00, H04W (71)Name of Applicant : (51) International classification 72/04 1)QUALCOMM INCORPORATED (31) Priority Document No :62/617,045 Address of Applicant :Attn: International IP Administration (32) Priority Date :12/01/2018 5775 Morehouse Drive San Diego, California 92121-1714 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2019/012980 1)HUANG, Yi Filing Date :10/01/2019 2)CHEN, Wanshi (87) International Publication No :WO 2019/140041 3)GAAL, Peter (61) Patent of Addition to Application 4)ANG, Peter, Pui Lok :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Methods, systems, and devices for wireless communications are described. A user equipment (UE) may receive a downlink control message from a base station. The downlink control message may include a grant for communication with the base station and an indication of a component carrier (CC) to use for transmission of uplink control information (UCI). The UE may determine a CC for UCI transmission based at least in part on the CC indication, and the UE may transmit an uplink message including the UCI via the determined CC.

No. of Pages : 42 No. of Claims : 30

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27307

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023350 A (19) INDIA (22) Date of filing of Application :03/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : MONITORING OCCASION FOR PAGING DETERMINATION

:H04W 68/02, H04W (71)Name of Applicant : (51) International classification 88/08 1)QUALCOMM INCORPORATED (31) Priority Document No :62/616,863 Address of Applicant :Attn: International IP Administration (32) Priority Date :12/01/2018 5775 Morehouse Drive San Diego, California 92121-1714 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2019/012906 1)ISLAM, Muhammad Nazmul Filing Date :09/01/2019 2)SADIQ, Bilal (87) International Publication No :WO 2019/139990 3)LUO, Tao (61) Patent of Addition to Application 4)JOHN WILSON, Makesh Pravin :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a base station may determine, for a user equipment, a configuration for a monitoring occasion for paging within a paging occasion based at least in part on a user equipment index and a reference signal index. In some aspects, the base station may provide a paging signal in accordance with the configuration based at least in part on determining the configuration for the monitoring occasion for paging within the paging occasion. Numerous other aspects are provided.

No. of Pages : 22 No. of Claims : 30

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27308

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023484 A (19) INDIA (22) Date of filing of Application :04/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A TEATCUP LINER AND A TEATCUP

(51) International classification :A01J 5/08 (71)Name of Applicant : (31) Priority Document No :1751386-2 1)DELAVAL HOLDING AB (32) Priority Date :09/11/2017 Address of Applicant :P.O. Box 39 147 21 Tumba Sweden (33) Name of priority country :Sweden (72)Name of Inventor : (86) International Application No :PCT/SE2018/051137 1)RAJASEKARAN, Kamlesh Filing Date :06/11/2018 2)„LVEBY, Nils

(87) International Publication No :WO 2019/093951 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A teatcup to be attached to the teat of an animal and a teatcup liner (1) to be mounted in a shell (2) of the teatcup are disclosed. The teatcup liner comprises a barrel (3) enclosing an inner space (7) for receiving the teat. The barrel comprises a lower section (3') and an upper section (3") adjoining the lower section. The barrel has a polygonal cross-sectional shape, defining a plurality of side portions (18) and a plurality of corner portions (19), each connecting two of the side portions. Each side portion has a side wall thickness at a centre line of the side portion. Each corner portion has a corner wall thickness at a centre line of the corner portion. The corner wall thickness is thicker than the side wall thickness along the barrel. The corner wall thickness decreases along the upper section of the barrel towards the lower section.

No. of Pages : 15 No. of Claims : 14

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27309

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023485 A (19) INDIA (22) Date of filing of Application :04/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMPOUNDS AND METHODS FOR REDUCING SNCA EXPRESSION

:C12N 15/113, A61K (71)Name of Applicant : 31/7088, A61K 1)IONIS PHARMACEUTICALS, INC. (51) International classification 31/712, A61K Address of Applicant :2855 Gazelle Court Carlsbad, CA 31/7125, C07H 21/04 92010 U.S.A. (31) Priority Document No :62/584009 (72)Name of Inventor : (32) Priority Date :09/11/2017 1)KORDASIEWICZ, Holly (33) Name of priority country :U.S.A. 2)SINGH, Priyam (86) International Application No :PCT/US2018/060097 3)FREIER, Susan, M. Filing Date :09/11/2018 4)COLE, Tracy, A.

(87) International Publication No :WO 2019/164562 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided are compounds, methods, and pharmaceutical compositions for reducing the amount or activity of SNCA mRNA in a cell or animal, and in certain instances reducing the amount of alpha-synuclein protein in a cell or animal. Such compounds, methods, and pharmaceutical compositions are useful to ameliorate at least one symptom or hallmark of a neurodegenerative disease. Such symptoms and hallmarks include motor dysfunction, aggregation of alpha-synuclein, neurodegeneration, cognitive decline and dementia. Such neurodegenerative diseases include Parkinson's disease, dementia withLewy bodies, diffuse Lewy body disease, pure autonomic failure, multiple system atrophy, neuronopathic Gaucher's disease and Alzheimer's disease.

No. of Pages : 194 No. of Claims : 74

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27310

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023830 A (19) INDIA (22) Date of filing of Application :06/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND APPARATUS FOR IDENTIFYING USER DEVICE

(51) International classification :H04W 36/30 (71)Name of Applicant : (31) Priority Document No :NA 1)BEIJING XIAOMI MOBILE SOFTWARE CO., LTD. (32) Priority Date :NA Address of Applicant :Room 01 Floor 9, Rainbow City (33) Name of priority country :NA Shopping Mall II of China Resources No. 68, Qinghe Middle (86) International Application No :PCT/CN2017/113616 Street, Haidian District Beijing 100085 China Filing Date :29/11/2017 (72)Name of Inventor : (87) International Publication No :WO 2019/104539 1)HONG, Wei

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure relates to a method and an apparatus for identifying a user device. The method comprises: receiving an uplink message sent at least twice by the same user device; on the basis of the uplink message sent at least twice, determining remote radio unit RRU position information of an RRU that received each uplink message; comparing whether the ratio of the total number of the at least two items of RRU position information occupied by the number of different items of RRU position information amongst the at least two items of RRU position information reaches a preset ratio threshold; when the ratio does not reach the preset ratio threshold, determining that the user device is an ordinary user device; and, when the ratio reaches the preset ratio threshold, determining that the user device is a high-speed mobile user device. In the present disclosure, a base station can identify whether a user device is an ordinary user device or a high-speed mobile user device.

No. of Pages : 28 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27311

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023914 A (19) INDIA (22) Date of filing of Application :08/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD, ENGINE, AND CONTROL SYSTEM FOR CONTROLLING SOOT LOADING OF EXHAUST GAS AFTERTREATMENT COMPONENTS

:F01N 9/00, F01N (71)Name of Applicant : 3/00, F01N 3/021, 1)CUMMINS INC. (51) International classification F01N 3/023, F01N Address of Applicant :500 Jackson Street Columbus, Indiana 11/00 47201 U.S.A. (31) Priority Document No :62/585070 (72)Name of Inventor : (32) Priority Date :13/11/2017 1)DIWAKER ABRAHAM, Jeffrey David Selwyn (33) Name of priority country :U.S.A. 2)VEMURI, Ananth (86) International Application No :PCT/US2018/056897 3)HAAS, Michael Filing Date :22/10/2018 4)KIDD, Adam W.

(87) International Publication No :WO 2019/094180 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method, system, and apparatus relating to operating an internal combustion engine include steps or features for determining a performance threshold of a particulate filter disposed in an exhaust gas flow of the engine having a set time interval between regeneration events of the particulate filter; determining a rate at which the particulate filter is reaching the performance threshold; and controlling an exhaust gas characteristic to control the rate so that the performance threshold is reached at or just before an end of the time interval. In an embodiment, there are steps or features for interpreting a filter condition of the particulate filter; determining a particulate matter load rate of the filter as a function of the condition; determining a limit of an exhaust gas characteristic based on the load rate; and controlling engine operation to control the exhaust gas characteristic to satisfy the limit.

No. of Pages : 19 No. of Claims : 18

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27312

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023915 A (19) INDIA (22) Date of filing of Application :08/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CONTINUOUS PRODUCT-PROCESSING APPARATUS AND METHOD FOR CLEANING WITH PRODUCT REPOSITIONING

:B65G 45/14, B65G (71)Name of Applicant : (51) International classification 15/60, B65G 39/02, 1)LAITRAM, L.L.C. B65G 23/44 Address of Applicant :Legal Department 200 Laitram Lane (31) Priority Document No :15/815287 Harahan, Louisiana 70123 U.S.A. (32) Priority Date :16/11/2017 (72)Name of Inventor : (33) Name of priority country :U.S.A. 1)GREVE, Christopher G.

(86) International Application No :PCT/US2018/059132 Filing Date :05/11/2018 (87) International Publication No :WO 2019/099223 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A continuous product-processing apparatus having a conveyor capable of repositioning product and cleaning itself of debris and a method for its operation. The apparatus includes a conveyor that transports products atop a conveyor belt along a carryway to a processing chamber. Upper and lower diverting rollers guide the belt along an S-shaped product-repositioning path segment of the carryway. The diverting rollers are rotated at a speed normally greater than the speed of the conveyor belt to cause the belt to slip on the roller's periphery, which effects a scraping action against the conveying side of the belt to dislodge debris from the belt and the rollers. One-way ratcheting drives or belt restricters positioned on the product-positioning path segment to limit belt excursion are used to prevent the belt from building up along the carryway and tightening in the lower return.

No. of Pages : 8 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27313

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023918 A (19) INDIA (22) Date of filing of Application :08/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : GAS-SHIELDED ARC WELDING WIRE AND GAS-SHIELDED ARC WELDING METHOD

:B23K 35/30, B23K (71)Name of Applicant : 9/16, B23K 9/173, 1)KABUSHIKI KAISHA KOBE SEIKO SHO (KOBE (51) International classification B23K 9/23, B23K STEEL, LTD.) 35/368 Address of Applicant :2-4, Wakinohama-Kaigandori 2-chome, (31) Priority Document No :2017-240614 Chuo-ku, Kobe-shi, Hyogo 6518585 Japan (32) Priority Date :15/12/2017 (72)Name of Inventor : (33) Name of priority country :Japan 1)IKAI, Kazuya (86) International Application No :PCT/JP2018/044049 2)IKEDA, Tetsunao

Filing Date :29/11/2018 (87) International Publication No :WO 2019/116917 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided are: a gas-shielded arc welding wire which enables automatization of welding (continuous automated welding) even with use of a high-Cr welding material by suppressing welding defects such as fusion failure and bead shape defect; and a gas-shielded arc welding method. A gas-shielded arc welding wire which is characterized by containing, in mass% relative to the total mass of the wire, 0.01-0.50% of C, 0.01-1.50% of Si, 0.10-2.50% of Mn, 5-15% of Cr, 0.05-1.50% of Ni, 0.1-2.0% of Mo, 0.1-1.0% of V, 0.01- 0.20% of Nb, 0.001-0.050% of REM, 0.0010-0.0200% of S, and 0.025% or less of O (including 0%), and which is also characterized by satisfying formula (1). (1): 3.0 = (Nb + 10 — REM)/(S + O) = 200.0

No. of Pages : 60 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27314

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023928 A (19) INDIA (22) Date of filing of Application :08/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : GANAXOLONE FOR USE IN TREATING GENETIC EPILEPTIC DISODERS

:A61K 31/57, C12Q (71)Name of Applicant : (51) International classification 1/68 1)MARINUS PHARMACEUTICALS, INC. (31) Priority Document No :62/584403 Address of Applicant :170 N. Radnor Chester Road Suite 250 (32) Priority Date :10/11/2017 Radnor, PA 19087-5279 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2018/060037 1)MASUOKA, Lorianne, K. Filing Date :09/11/2018 2)LAPPALAINEN, Jaakko

(87) International Publication No :WO 2019/094724 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The disclosure provides a method of treating a mammal having a genetic epileptic disorder, comprising chronically administering a pharmaceutically acceptable pregnenolone neurosteroid to a mammal having a genetic epileptic disorder in an amount effective to reduce the seizure frequency in the mammal. In certain preferred embodiments, the mammal is a human patient who has a CDKL5 genetic mutation. In certain preferred embodiments, the patient has a low endogenous level of a neurosteroid(s). In certain preferred embodiments, the pregnenolone neurosteroid is ganaxolone.

No. of Pages : 145 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27315

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023948 A (19) INDIA (22) Date of filing of Application :08/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SOLID STATE LIGHT SOURCES ENABLING DIGITAL SPOKES WHEN USED WITH A COLOR WHEEL

:H04N 9/31, G02B (71)Name of Applicant : (51) International classification 26/00, G03B 21/20 1)SIGNIFY HOLDING B.V. (31) Priority Document No :17201694.1 Address of Applicant :High Tech Campus 48, NL-5656 AE (32) Priority Date :14/11/2017 Eindhoven, The Netherlands. Netherlands (33) Name of priority country :EPO (72)Name of Inventor : (86) International Application No :PCT/EP2018/081026 1)VANBROEKHOVEN, Vincent Filing Date :13/11/2018 2)KOOLE, Roelof (87) International Publication No :WO 2019/096764 3)DILLES, Bart, Alex, Theresia (61) Patent of Addition to Application 4)VAN DEN BERGH, John-John, Pieter, Jan :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention provides a system (1000) for processing light, the system (1000) configured to provide along a main beam path (1105) a beam (1005) of system light (1001), wherein the system light (1001) comprises one or more of first light (111) having a first spectral distribution, second light (121) having a second spectral distribution, and third light (131) having a third spectral distribution, wherein the first, second, and third spectral distributions mutually differ, wherein the system (1000) comprises: - a lighting arrangement (100) configured to provide along a first beam path (1101) a first beam (101) comprising primary light (103) having a spectral power distribution with at least 80% of the spectral power consisting of one of the first light (111), the second light (121), and the third light (131), and/or configured to provide along a second beam pat (1102) a second beam (102) comprising composed light (104) having a spectral distribution with at least 80% of the spectral power consisting of the two others of the first light (111), the second light (121), and the third light (131); - an optical filter system (200) comprising a plurality of segments (210), wherein two or more segments (210) have different transmission characteristics for one or more of the primary light (103) and the composed light (104); wherein during operation of the system (1000) the optical filter system (200) is configured to have the segments (210) of the plurality of segments (210) sequentially intercept the main beam path (1105) or the second beam path (1102), wherein during a time period (tsp) the beam path (1105, 1102) is partially intercepted by a first segment (211) and partially intercepted by a second segment (212); - a control system (300) configured to control the lighting arrangement (100) and the optical filter system (200) such that during at least part of the time period (tsp) at least 80% of a spectral power distribution of the system light (1001) of the beam (1005) of system light (1001) consists of the primary light (103).

No. of Pages : 47 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27316

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023949 A (19) INDIA (22) Date of filing of Application :08/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SOLID STATE LIGHTING CIRCUIT AND CONTROL METHOD

(51) International classification :H05B 33/08 (71)Name of Applicant : (31) Priority Document No :17201305.4 1)SIGNIFY HOLDING B.V. (32) Priority Date :13/11/2017 Address of Applicant :High Tech Campus 48, NL-5656 AE (33) Name of priority country :EPO Eindhoven, The Netherlands. Netherlands (86) International Application No :PCT/EP2018/080630 (72)Name of Inventor : Filing Date :08/11/2018 1)HONTELE, Bertrand Johan Edward (87) International Publication No :WO 2019/092114 2)ZIJLMAN, Theo Gerrit (61) Patent of Addition to Application 3)TER WEEME, Berend Jan Willem :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A lighting circuit makes use of a switch mode power converter to drive a solid state lighting arrangement having a lighting unit and a lighting control switch. A pulse width modulation control signal is applied to the lighting control switch for dimming control with an activation pulse during which the lighting unit is activated. The power converter delivers a triangular current waveform and the activation pulse is delayed until a predetermined point within the triangular current waveform. This ensures that the PWM pulse during which the lighting arrangement is turned on has timing which is synchronized with the timing of the switch mode power converter. The prevents beat frequencies so that visible flicker is avoided.

No. of Pages : 14 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27317

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023989 A (19) INDIA (22) Date of filing of Application :08/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CLAMPING DEVICE

:B25B 5/06, B25B (71)Name of Applicant : (51) International classification 5/16, B23Q 3/06, 1)SMC CORPORATION B23Q 11/08 Address of Applicant :14-1, Sotokanda 4-chome, Chiyoda-ku, (31) Priority Document No :2017-218853 Tokyo 1010021 Japan (32) Priority Date :14/11/2017 (72)Name of Inventor : (33) Name of priority country :Japan 1)ISHII, Mikihito (86) International Application No :PCT/JP2018/041268 2)NAKAJIMA, Toshikazu

Filing Date :07/11/2018 (87) International Publication No :WO 2019/098099 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A clamping device (10) has a clamp arm (20) pivotably housed inside a body (16), and a locating section (54) for positioning workpieces (W1, W2) is provided on an upper portion of the body (16). The locating section (54) is formed with a slit hole (60) which enables a claw portion (76) of the clamp arm (20) to protrude outside, and is provided inside with a shutter (66) facing the slit hole (60) and being movable. The claw portion (76) of the clamp arm (20) is inserted through a clamp hole (72) of the shutter (66). Then, when the clamp arm (20) moves inside the body (16) in the axial direction and rotates, the shutter (66) moves integrally with the clamp arm (20) in the axial direction to cover the slit hole (60). Thus, the opening portion of the slit hole (60) is suitably covered except that portion occupied by the claw portion (76), so that foreign matter and the like can be prevented from entering the locating section (54) through the slit hole (60).

No. of Pages : 13 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27318

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023990 A (19) INDIA (22) Date of filing of Application :08/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : FLOWING VAPOR PRESSURE APPARATUS AND RELATED METHOD

:G01F 1/74, G01F (71)Name of Applicant : (51) International classification 1/84, G01F 15/00 1)MICRO MOTION, INC. (31) Priority Document No :NA Address of Applicant :7070 Winchester Circle, Boulder, (32) Priority Date :NA Colorado 80301 U.S.A. (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :PCT/US2017/061255 1)HOLLINGSWORTH, Justin Craig Filing Date :13/11/2017 2)BUTTLER, Marc Allan (87) International Publication No :WO 2019/094038 3)LEAPLEY, Jason Alan

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method of determining vapor pressure of a fluid is provided. The method includes the steps of providing a meter (5) having meter electronics (20), the meter (5) being at least one of a flowmeter and a densitometer, and flowing a process fluid through the meter (5). A pressure of the process fluid is measured. The pressure of the process fluid is adjusted until a monophasic/biphasic boundary is reached. The flowing vapor pressure of the process fluid is determined at the monophasic/biphasic boundary.

No. of Pages : 14 No. of Claims : 19

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27319

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023991 A (19) INDIA (22) Date of filing of Application :08/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SENSOR MOUNTING SYSTEM

:G01D 11/30, F17C (71)Name of Applicant : (51) International classification 13/02 1)HEXAGON TECHNOLOGY AS (31) Priority Document No :62/585,671 Address of Applicant :Korsegata 4B, P.O. Box 836, Sentrum, (32) Priority Date :14/11/2017 NO-6002 …lesund Norway (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2018/060886 1)HALVORSEN, Ken Filing Date :14/11/2018 2)BURKS, Brian (87) International Publication No :WO 2019/099432 3)CROCKER, Ryan

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A sensor mounting assembly (44, 46) is configured for use with a vessel arrangement (20) including at least four vessels (22). The assembly (44, 46) includes first and second elongated frame members (50, 50a, 50b), first and second rollers (56, 72), and first and second sensors (34). The first sensor (34) is attached to the first elongated frame member (50a) and is configured to contact the surface of the first vessel (22) upon actuation in a first direction (40). The second sensor (34) is attached to the second elongated frame member (50b) and is configured to contact the surface of the second vessel (22) upon actuation in a second direction (40) that is substantially orthogonal to the first direction. This disclosure also describes a method of mounting at least six sensors (34) for use with a vessel arrangement (20) including at least four vessels (22), the vessel arrangement (20) disposed in a container (24) in a two-by-two stacked configuration having a central space (64).

No. of Pages : 17 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27320

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023992 A (19) INDIA (22) Date of filing of Application :08/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CONTROLLED-RELEASE PREPARATION

:A61K 31/4965, (71)Name of Applicant : A61K 9/20, A61K 1)Nippon Shinyaku Co., Ltd. (51) International classification 9/50, A61K 47/32, Address of Applicant :14, Kisshoin Nishinosho Monguchicho, A61K 47/36 Minamiku, Kyoto-shi, Kyoto 601-8550 Japan (31) Priority Document No :2017-220777 (72)Name of Inventor : (32) Priority Date :16/11/2017 1)FURUTA, Shouji (33) Name of priority country :Japan 2)HATTORI, Naoto

(86) International Application No :PCT/JP2018/042359 Filing Date :15/11/2018 (87) International Publication No :WO 2019/098300 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The purpose of the present invention is to provide a controlled release formulation which can both prevent a compound A from being released precipitously and release the compound A in a pH-independent manner and contains 2-{4-[N-(5,6-diphenylpyradine-2-yl)-N- isopropylamino]butyloxy}-N-(methylsulfonyl)acetamide as an active ingredient. The controlled release formulation is characterized by containing 2-{4-[N-(5,6-diphenylpyradine-2-yl)-N-isopropylamino]butyloxy}-N-(methylsulfonyl)acetamide, a water-soluble polymer, a functionalized starch, and an alkali substance, and having a pH of 10 or more.

No. of Pages : 48 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27321

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047023993 A (19) INDIA (22) Date of filing of Application :08/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ACKNOWLEDGEMENT SIGNALING PROCESSES FOR RADIO ACCESS NETWORKS

:H04L 5/00, H04L (71)Name of Applicant : (51) International classification 1/18 1)TELEFONAKTIEBOLAGET LM ERICSSON (PUBL) (31) Priority Document No :NA Address of Applicant :SE-164 83, Stockholm, Sweden Sweden (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)BALDEMAIR, Robert (86) International Application No :PCT/SE2017/051127 2)FALAHATI, Sorour Filing Date :14/11/2017 3)PARKVALL, Stefan (87) International Publication No :WO 2019/098892 4)DAHLMAN, Erik (61) Patent of Addition to Application 5)CHEN LARSSON, Daniel :NA Number 6)BEHRAVAN, Ali :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method of operating a target radio node (10, 100) in a radio access network is disclosed. The method comprises receiving control information transmitted on a control channel, and transmitting acknowledgement feedback pertaining to the control information. The disclosure also pertains to related methods and devices.

No. of Pages : 60 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27322

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024104 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ALUMINUM-AIR BATTERY UNITS AND STACKS

:H01M 12/06, H01M (71)Name of Applicant : (51) International classification 4/46, H01M 6/50 1)MOCHIZUKI, Mitsuru (31) Priority Document No :62/584955 Address of Applicant :2 Yodfat St. P.O.B 1290 7129106 Lod (32) Priority Date :13/11/2017 Israel (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/IL2018/051224 1)MILLER, Yisrael Filing Date :13/11/2018 2)TZIDON, Dekel (87) International Publication No :WO 2019/092732 3)YADGAR, Avraham

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Aluminum-air battery units and stacks are provided with frames configured to mechanically support the anode of each unit, within a housing configured to support the frame and the air cathode(s) mechanically, sealably hold the electrolyte within the housing and in fluid communication with openings in the housing - forming one or two sided electrochemical cell in each unit. The frame comprises a protective strap configured to protect edges of the rectangular anode against corrosion by the electrolyte during operation, and also an external trapezoid shape that is configured to press the protective strap against the edges of the rectangular anode upon insertion of the frame with the anode into the housing. Various embodiments comprise, spacers between the anode and cathodes and grids supporting airways to the cathodes. In disclosed configurations, anode may be replaced after electrolyte evacuation while maintaining the stack sealed and quickly ready for renewed operation.

No. of Pages : 20 No. of Claims : 46

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27323

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024105 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COGNITIVE DYSFUNCTION DIAGNOSTIC APPARATUS AND COGNITIVE DYSFUNCTION DIAGNOSTIC PROGRAM

:A61B 10/00, A61B (71)Name of Applicant : (51) International classification 3/113 1)MOCHIZUKI, Mitsuru (31) Priority Document No :2017-219321 Address of Applicant :1-1, Yamadaoka, Suita-shi, Osaka (32) Priority Date :14/11/2017 5650871 Japan (33) Name of priority country :Japan (72)Name of Inventor : (86) International Application No :PCT/JP2018/041932 1)TAKEDA, Shuko Filing Date :13/11/2018 2)OYAMA, Akane (87) International Publication No :WO 2019/098173 3)NAKAJIMA, Tsuneo (61) Patent of Addition to Application 4)MORISHITA, Ryuichi :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : This cognitive dysfunction diagnostic apparatus (1) is provided with: a display unit (10) which displays an image for diagnosis of cognitive dysfunction on a display surface (11); an imaging unit (21) which captures images of a patient's eye; a detection unit (37) which detects the patient's viewpoints within the display surface (11) in a time-sequence manner on the basis of the images captured by the imaging unit (21); a creation unit (38) which creates a distribution map representing a distribution of the viewpoints detected by the detection unit (37); a storage unit (32) which stores case characteristic data (310) indicative of characteristics of a viewpoint distribution that corresponds to a typical case of cognitive dysfunction; and a diagnosis unit (39) which provides a diagnostic of the patient's cognitive dysfunction by determining whether or not the distribution map shows characteristics of the case characteristic data.

No. of Pages : 48 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27324

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024106 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : USER SELECTED CONTROL FEATURES FOR POWERTRAIN MANAGEMENT

(51) International classification :B60W 30/188 (71)Name of Applicant : (31) Priority Document No :62/585620 1)MOCHIZUKI, Mitsuru (32) Priority Date :14/11/2017 Address of Applicant :500 Jackson Street Columbus, Indiana (33) Name of priority country :U.S.A. 47201 U.S.A. (86) International Application No :PCT/US2018/054566 (72)Name of Inventor : Filing Date :05/10/2018 1)YAPICI, Tarkan (87) International Publication No :WO 2019/099115 2)MCLAREN, Stephen James (61) Patent of Addition to Application 3)LLAVESHI, Ingrid :NA Number 4)KENDRICK, William D. :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : There is disclosed the use of an accelerator pedal position and an associated kickdown status to change a selected performance indicator value associated with a vehicle powertrain in order to activate or inhibit control features which manage the available power to the powertrain for propelling the vehicle. The driver can activate and/or inhibit the powertrain control features without the need for external sensors and without the driver manipulating a switch in the vehicle that requires the driver to divert attention from driving.

No. of Pages : 14 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27325

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024107 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : USE OF CARBAMATE COMPOUND FOR REDUCING OR TREATING DEVELOPMENTAL DISORDERS INCLUDING FRAGILE X SYNDROME, ANGELMAN SYNDROME OR RETT SYNDROME

:A61K 31/41, A61K (71)Name of Applicant : (51) International classification 31/16 1)MOCHIZUKI, Mitsuru (31) Priority Document No :10-2017-0151251 Address of Applicant :221, Pangyoyeok-ro, Bundang-gu (32) Priority Date :14/11/2017 Seongnam-si Gyeonggi-do 13494 Republic of Korea (33) Name of priority country :Republic of Korea (72)Name of Inventor : (86) International Application No :PCT/KR2018/013765 1)SHIN, Hye Won Filing Date :13/11/2018 2)HWANG, Sun Gwan

(87) International Publication No :WO 2019/098630 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a use of a carbamate compound represented by chemical formula 1, or a pharmaceutically acceptable salt, a solvate or a hydrate thereof for reducing or treating developmental disorders including fragile X syndrome, Angelman syndrome or Rett syndrome.

No. of Pages : 24 No. of Claims : 23

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27326

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024137 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMMUNICATION SYSTEM AND BASE STATION

:H04W 76/19, (71)Name of Applicant : (51) International classification H04W 16/32, H04W 1)MITSUBISHI ELECTRIC CORPORATION 24/04, H04W 72/04 Address of Applicant :7-3, Marunouchi 2-chome, Chiyoda-ku, (31) Priority Document No :2017-253649 Tokyo 1008310 Japan (32) Priority Date :28/12/2017 (72)Name of Inventor : (33) Name of priority country :Japan 1)SHIMODA Tadahiro (86) International Application No :PCT/JP2018/048400 2)MOCHIZUKI Mitsuru

Filing Date :28/12/2018 (87) International Publication No :WO 2019/131985 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided is a communication system or the like having high reliability. The communication system is provided with: a communication terminal device; and a plurality of base stations which are configured to be able to wirelessly communicate with the communication terminal device. The plurality of base stations include a master base station and a secondary base station constituting dual-connectivity with respect to the communication terminal device. When a failure has occurred in a Secondary Cell Group (SCG) which is used for communication between the communication terminal device and the secondary base station (ST801), the master base station acquires the latest SCG setting (ST802).

No. of Pages : 71 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27327

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024147 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMPOSITIONS AND METHODS FOR MODULATING ENDOTHELIAL CELL MIGRATION AND ANGIOGENESIS

:A61K 36/45, A61P (71)Name of Applicant : (51) International classification 9/00, A61K 8/34 1)UNIVERSITY OF MAINE SYSTEM BOARD OF (31) Priority Document No :62/587,113 TRUSTEES (32) Priority Date :16/11/2017 Address of Applicant :107 Maine Avenue, Bangor, ME 04401 (33) Name of priority country :U.S.A. U.S.A. (86) International Application No :PCT/US2018/061197 (72)Name of Inventor : Filing Date :15/11/2018 1)KLIMIS-ZACAS, Dorothy (87) International Publication No :WO 2019/099613 2)TSAKIROGLOU, Panagiotis

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Materials and methods for modulating endothelial cell migration, angiogenesis, and gene expression of VEGF, AKTl, RACl, RHOA, and eNOS are described.

No. of Pages : 37 No. of Claims : 55

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27328

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024148 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : HEAT EXCHANGER AND APPARATUS FOR EXTRACTION OF WATER FROM AIR AND METHOD OF MANUFACTURE THEREOF

:F24F 3/14, F28D (71)Name of Applicant : 1/04, F28D 1/047, 1)WATERGEN LTD (51) International classification F28D 7/08, F28D Address of Applicant :2 Granit Street, Petach Tikvah 4951446 9/00 Israel (31) Priority Document No :255877 (72)Name of Inventor : (32) Priority Date :23/11/2017 1)DULBERG, Sharon (33) Name of priority country :Israel 2)KOHAVI, Arye (86) International Application No :PCT/IL2018/051266 3)MAIER, Eliahu

Filing Date :22/11/2018 (87) International Publication No :WO 2019/102466 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A heat exchanger comprising a stack of sets of fins and tubes assembled to embossed plates with a void. The fins overlap the void having a peripheral margin of the fin attached to a peripheral margin on the plate around the void. Further provided are fins comprising through fluid apertures. Further provided are plates comprising lateral peripheral protrusions enabling selective sealing of gaps between adjacent plates. Also disclosed are plates comprising uniformizing protrusions configured to reduce non- uniform fluid mass flow between different channel protrusions in heat exchanging zones. Further discloses is an assembly method comprising alternately placing fins and plates or pre-assembled fin and plate sets, and a method for selective sealing faces of the heat exchanger by unselective application of sealant or heat. Also disclosed is a refrigerating apparatus comprising the heat exchanger of the invention having airflow exiting the heat exchanger pass through a condenser or evaporator.

No. of Pages : 35 No. of Claims : 43

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27329

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024160 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A PLANAR TRANSFORMER AND A METHOD FOR REDUCING COMMON-MODE NOISE IN A PLANAR TRANSFORMER

:H01F 27/28, H01F (71)Name of Applicant : (51) International classification 27/33, H01F 27/38, 1)MOCHIZUKI, Mitsuru H01F 27/40 Address of Applicant :PL 95 24101 SALO Finland (31) Priority Document No :201711128338.5 2)SALCOMP TECH SHENZHEN CO., LTD (32) Priority Date :15/11/2017 (72)Name of Inventor : (33) Name of priority country :China 1)PURANEN, Lauri (86) International Application No :PCT/EP2018/081347 2)LIAO, Zhongming

Filing Date :15/11/2018 (87) International Publication No :WO 2019/096892 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a planar transformer that comprises a primary winding (201) formed on at least one primary layer (102), a secondary winding (202) formed on at least one secondary layer (104), and a compensation winding (203) formed on a compensation layer (103) that is arranged between one primary layer (102) and one secondary layer (104). The planar transformer further comprises a first conductive area (204) formed on the compensation layer (103) and electrically connected to the compensation winding (203), and a second conductive area (205) formed on the secondary layer (104) adjacent to the compensation layer (103) and located in parallel with the first conductive area (204). The present invention also relates to a method for reducing common-mode noise in a planar transformer.

No. of Pages : 10 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27330

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024162 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COUMARIN DERIVATIVE FOR THERAPY OR PROPHYLAXIS OF A CELL PROLIFERATIVE DISORDER

:A61K 31/37, A61K (71)Name of Applicant : (51) International classification 31/573, A61P 35/04, 1)MOCHIZUKI, Mitsuru A61P 35/00 Address of Applicant :123 Old Brompton Road London SW7 (31) Priority Document No :PCT/EP2017/079506 3RP U.K. (32) Priority Date :16/11/2017 2)THE ROYAL MARSDEN NHS FOUNDATION TRUST (33) Name of priority country :EPO (72)Name of Inventor : (86) International Application No :PCT/EP2018/062805 1)BANERJI, Udai

Filing Date :16/05/2018 (87) International Publication No :WO 2019/096449 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention provides a medicament for the treatment or prevention of a cell proliferative disorder, the medicament comprising as an active ingredient a compound represented by formula or a pharmaceutically acceptable salt thereof, wherein the medicament is used in such a manner that: (a) said compound or salt is administered twice weekly for 3 weeks, (b) administration of said compound or salt is paused for the following 1 week, and (c) steps (a) and (b) are subsequently repeated at least once.

No. of Pages : 33 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27331

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024163 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SURFACE-TREATED INFRARED-ABSORBING FINE PARTICLES, SURFACE-TREATED INFRARED-ABSORBING FINE PARTICLE POWDER, INFRARED-ABSORBING FINE PARTICLE DISPERSION IN WHICH SAID SURFACE-TREATED INFRARED-ABSORBING FINE PARTICLES ARE USED, INFRARED-ABSORBING FINE PARTICLE DISPERSOID, AND METHODS FOR PRODUCING THESE

:C09K 3/00, C01G (71)Name of Applicant : (51) International classification 41/00, G02B 5/22 1)MOCHIZUKI, Mitsuru (31) Priority Document No :2017-218520 Address of Applicant :11-3, Shimbashi 5-chome, Minato-ku, (32) Priority Date :13/11/2017 Tokyo 1058716 Japan (33) Name of priority country :Japan (72)Name of Inventor : (86) International Application No :PCT/JP2018/042016 1)TSUNEMATSU Hirofumi Filing Date :13/11/2018 2)CHONAN Takeshi (87) International Publication No :WO 2019/093524 3)FUKUYAMA Hideaki

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided are surface-treated infrared-absorbing fine particles having exceptional moist heat resistance as well as exceptional infrared absorption characteristics, a surface-treated infrared-absorbing fine particle powder containing said surface-treated infrared-absorbing fine particles, an infrared-absorbing fine particle dispersion and an infrared-absorbing fine particle dispersoid in which said surface- treated infrared-absorbing fine particles are used, and methods for producing these. Provided are surface-treated infrared-absorbing fine particles in which the surface of the infrared-absorbing fine particles is coated by a coating layer that includes one or more selected from hydrolysis products of metal chelate compounds, polymers of hydrolysis products of metal chelate compounds, hydrolysis products of metal cyclic oligomer compounds, and polymers of hydrolysis products of metal cyclic oligomer compounds.

No. of Pages : 79 No. of Claims : 23

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27332

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024298 A (19) INDIA (22) Date of filing of Application :10/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : TAGGING MEETING INVITEES TO AUTOMATICALLY CREATE TASKS

(71)Name of Applicant : 1)MICROSOFT TECHNOLOGY LICENSING, LLC :G06Q 10/00, G06Q Address of Applicant :One Microsoft Way Redmond, (51) International classification 10/06, G06Q 10/10 Washington 98052-6399 U.S.A. (31) Priority Document No :15/831255 (72)Name of Inventor : (32) Priority Date :04/12/2017 1)BURLIN, Eva Britta Karolina (33) Name of priority country :U.S.A. 2)COURTEMANCHE, Eric Scott (86) International Application No :PCT/US2018/062151 3)SEO, Haebin Filing Date :21/11/2018 4)CURRY, Ian Dwyer (87) International Publication No :WO 2019/112800 5)TISCHHAUSER, Paul David (61) Patent of Addition to Application 6)ASH, Phoebe Eyonnie :NA Number 7)SONI, Shahil :NA Filing Date 8)PAZUCHANICS, Skye Lee (62) Divisional to Application Number :NA 9)PARK, SungJae Filing Date :NA 10)CHOI, Daniel Sungje

11)WILTBERGER, Sara 12)ALABI, Teslim Abiodun

(57) Abstract : Systems and methods are disclosed for automatically generating a calendar event for a task associated with a meeting. The disclosed systems and methods may include receiving an indication to create a meeting with at least one invitee. At least one invitee is assigned a task from an agenda associated with the meeting. When an invitee is assigned a task, a time slot is automatically added to the invitees' calendar.

No. of Pages : 19 No. of Claims : 12

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27333

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024336 A (19) INDIA (22) Date of filing of Application :10/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESSES AND SYSTEMS FOR REFORMING OF METHANE AND LIGHT HYDROCARBONS TO LIQUID HYDROCARBON FUELS

:C10G 45/64, B01J (71)Name of Applicant : 23/08, C01B 3/38, 1)GAS TECHNOLOGY INSTITUTE (51) International classification C10G 1/06, C10G Address of Applicant :1700 S. Mount Prospect Rd. Des 2/00 Plaines, Illinois 60018 U.S.A. (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)MARKER, Terry L. (33) Name of priority country :NA 2)LINCK, Martin B. (86) International Application No :PCT/US2017/061787 3)WANGEROW, Jim Filing Date :15/11/2017 4)ORTIZ-TORAL, Pedro

(87) International Publication No :WO 2019/099002 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Processes for converting methane and/or other hydrocarbons to synthesis gas (i.e., a gaseous mixture comprising H2 and CO) are disclosed, in which at least a portion of the hydrocarbon(s) is reacted with CO2. At least a second portion of the methane may be reacted with H2O (steam), thereby improving overall thermodynamics of the process, in terms of reducing endothermicity (H) and the required energy input, compared to "pure" dry reforming in which no H2O is present. Such dry reforming (reaction with CO2 only) or CO2-steam reforming (reaction with both CO2 and steam) processes are advantageously integrated with Fischer-Tropsch synthesis to yield liquid hydrocarbon fuels. Further integration may involve the use of a downstream finishing stage involving hydroisomerization to remove FT wax. Yet other integration options involve the use of combined CO2-steam reforming and FT synthesis stages (optionally with finishing) for producing liquid fuels from gas streams generated in a number of possible processes, including the hydropyrolysis of biomass.

No. of Pages : 64 No. of Claims : 22

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27334

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024337 A (19) INDIA (22) Date of filing of Application :10/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : HARDENER COMPONENT FOR MULTI-COMPONENT EPOXY RESIN MATERIAL, AND MULTI- COMPONENT EPOXY RESIN MATERIAL

:C08G 59/64, C08G (71)Name of Applicant : (51) International classification 59/68 1)HILTI AKTIENGESELLSCHAFT (31) Priority Document No :17207545.9 Address of Applicant :Feldkircherstr. 100 9494 Schaan (32) Priority Date :15/12/2017 Liechtenstein (33) Name of priority country :EPO (72)Name of Inventor : (86) International Application No :PCT/EP2018/081098 1)BEHRENS, Nicole

Filing Date :13/11/2018 (87) International Publication No :WO 2019/115110 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention relates to a hardener component (B) for a multi-component epoxy resin material, with a benzoxazine amine adduct as accelerator and an amine as hardener, wherein the benzoxazine amine adduct is present in the hardener component (B) in a proportion of 8.5% by weight to 75% by weight. The multi-component material with the benzoxazine amine adduct in the hardener component has a quick hardening time already at room temperature and can therefore be used advantageously for the chemical fixing of structural elements.

No. of Pages : 30 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27335

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024338 A (19) INDIA (22) Date of filing of Application :10/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : WATER PURIFICATION SYSTEM WITH A CENTRIFUGAL SYSTEM AND A FRICTIONAL HEATER SYSTEM

:B01D 21/26, C02F (71)Name of Applicant : (51) International classification 1/04, C02F 1/38 1)WATER NOW, INC. (31) Priority Document No :15/819056 Address of Applicant :2840 Bryan Avenue Fort Worth, TX (32) Priority Date :21/11/2017 76104 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2018/062145 1)DYOS, Mark

Filing Date :20/11/2018 (87) International Publication No :WO 2019/104104 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A water purification system with a centrifugal system and a factional heating system consists of a centrifugal unit, a cavitation unit, a cooling condenser, a vertical shaft, and a pitot tube. The centrifugal unit and the cavitation unit are mounted along the vertical shaft so that the rotational movement of the vertical shaft is transferred onto the centrifugal unit and the cavitation unit. Non-potable water is directed into the centrifugal unit to separate heavy solids. Less populated water from the centrifugal unit is transferred to the cavitation unit via the pitot tube. The cavitation unit uses friction to generate phase change in the volume of less populated water which is then directed to the cooling condenser to produce potable water.

No. of Pages : 7 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27336

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024440 A (19) INDIA (22) Date of filing of Application :10/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESSES FOR THE RESOLUTION OF BENZODIAZEPIN-2-ONE AND BENZOAZEPIN-2-ONE DERIVATIVES

:A61K 31/5513, (71)Name of Applicant : A61K 45/06, C07D 1)ENANTA PHARMACEUTICALS, INC. (51) International classification 243/16, C07D 413/12, Address of Applicant :500, Arsenal Street, Watertown, C07D 413/14 Massachusetts, 02472 U.S.A. (31) Priority Document No :62/585,192 (72)Name of Inventor : (32) Priority Date :13/11/2017 1)HAGUE, Andrew (33) Name of priority country :U.S.A. 2)RONSHEIM, Matthew

(86) International Application No :PCT/US2018/060666 Filing Date :13/11/2018 (87) International Publication No :WO 2019/094903 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to processes and intermediates useful in the preparation of biologically active molecules, especially in the synthesis of Respiratory Syncytial Virus (RSV) inhibitors. The present invention also relates to processes and intermediates for the preparation of compounds of Formula (1-0) and Formula (I):

No. of Pages : 28 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27337

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024494 A (19) INDIA (22) Date of filing of Application :11/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : RADIO ACCESS NETWORK NOTIFICATION AREA CONFIGURATION AND MANAGEMENT

:H04W 36/08, H04W (71)Name of Applicant : (51) International classification 48/10 1)FG INNOVATION COMPANY LIMITED (31) Priority Document No :62/587,018 Address of Applicant :Flat 2623, 26/F Tuen Mun Central (32) Priority Date :16/11/2017 Square, 22 Hoi Wing Road, Tuen Mun New Territories, Hong (33) Name of priority country :U.S.A. Kong China (86) International Application No :PCT/CN2018/116010 (72)Name of Inventor : Filing Date :16/11/2018 1)TSENG, Yunglan (87) International Publication No :WO 2019/096267 2)CHOU, Chieming (61) Patent of Addition to Application 3)CHEN, Hungchen :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method of Radio Access Network (RAN) Notification Area (RNA) management for a user equipment (UE) is disclosed. The method includes receiving, by the UE, a first Radio Resource Control (RRC) message having a first Radio Access Network (RAN) Notification Area (RNA) configuration; storing, by the UE, the first RNA configuration, when the UE is in an RRC Connected state, an RRC Inactive state, or a transition between the RRC Inactive state and the RRC Connected state; and applying, by the UE, an RNA update procedure, based on the first RNA configuration when the UE is in the RRC Inactive state.

No. of Pages : 39 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27338

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024495 A (19) INDIA (22) Date of filing of Application :11/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : FLUID DISTRIBUTOR, REACTION DEVICE, AND APPLICATION THEREOF

:B01J 8/24, B01J (71)Name of Applicant : (51) International classification 4/00, C07C 255/08 1)CHINA PETROLEUM & CHEMICAL CORPORATION (31) Priority Document No :201711128526.8 Address of Applicant :No.22 Chaoyangmen North Street, (32) Priority Date :14/11/2017 Chaoyang District, Beijing, 100728 China (33) Name of priority country :China 2)SHANGHAI RESEARCH INSTITUTE OF (86) International Application No :PCT/CN2018/114771 PETROCHEMICAL TECHNOLOGY SINOPEC Filing Date :09/11/2018 (72)Name of Inventor : (87) International Publication No :WO 2019/096065 1)ZHAO, Le (61) Patent of Addition to Application 2)WU, Lianghua :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A fluid distributor, a reaction device, and an application thereof. The fluid distributor (10) comprises one or a plurality of main fluid delivery pipes (12). The main fluid delivery pipe (12) is configured to form a closed shape when a centerline and/or a centerline extension thereof is joined end to end, or the plurality of the main fluid delivery pipes (12) is configured to form a closed shape when centerlines and/or centerline extensions thereof are joined end to end. Each of the main fluid delivery pipes (12) has at least one fluid inlet (15). A plurality of branch fluid delivery pipes (11) is disposed on each of the main fluid delivery pipes (12). A plurality of openings (13) is disposed on each of the branch fluid delivery pipes (11) in a lengthwise direction thereof, and a connecting portion (16) is disposed on each of the branch fluid delivery pipes (11), the connecting portion (16) being configured to connect the branch fluid delivery pipes (11) to a housing of a container after the branch fluid delivery pipes (11) are passed through the housing into an inner cavity. The fluid distributor at least exhibits a reduced risk of brittle nitriding fractures.

No. of Pages : 38 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27339

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024519 A (19) INDIA (22) Date of filing of Application :11/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AERIAL VEHICLE IDENTIFICATION BASED ON SESSION CONNECTIVITY

:H04W 84/04, B64C (71)Name of Applicant : (51) International classification 39/02, H04B 7/185, 1)QUALCOMM INCORPORATED H04W 36/00 Address of Applicant :ATTN: International IP Administration (31) Priority Document No :62/615827 5775 Morehouse Drive San Diego, California 92121-1714 U.S.A. (32) Priority Date :10/01/2018 (72)Name of Inventor : (33) Name of priority country :U.S.A. 1)PHUYAL, Umesh (86) International Application No :PCT/US2019/013093 2)HORN, Gavin, Bernard Filing Date :10/01/2019 3)RICO ALVARINO, Alberto (87) International Publication No :WO 2019/140119 4)ZISIMOPOULOS, Haris

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Methods, systems, and devices for wireless communications are described. A user equipment (UE) configured as a drone-coupled wireless device may be configured to transmit a message indicating information relating to the drone-coupled wireless device (e.g., aerial state, non-aerial state, airborne status, drone capability, quality of service (QoS) requirements of a drone service) to a base station. The message may also carry a session connectivity request, which the base station may use to determine that the UE is a drone-coupled wireless device, establish a bearer appropriate for a subscription service of the UE (e.g., as indicated by the drone capability), and apply appropriate protocols for the UE.

No. of Pages : 62 No. of Claims : 30

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27340

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024623 A (19) INDIA (22) Date of filing of Application :11/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ATTACHMENT STRUCTURE FOR CATALYST SUPPORT BODY

:F01N 3/28, B01D (71)Name of Applicant : (51) International classification 53/86, B01D 53/94, 1)NICHIDAI FILTER CORPORATION B01J 35/04 Address of Applicant :14 Shiotani, Zenjyoji, Ujitawara-cho, (31) Priority Document No :2017-247363 Tsuzuki-gun, Kyoto 6100201 Japan (32) Priority Date :25/12/2017 (72)Name of Inventor : (33) Name of priority country :Japan 1)NAKAMURA, Atsuto (86) International Application No :PCT/JP2018/047214 2)KATO, Tadashi Filing Date :21/12/2018 3)MINAMI, Takaharu

(87) International Publication No :WO 2019/131495 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : [Problem] To provide a structure that enables a catalyst support body that purifies exhaust from the combustion chamber of an internal combustion engine to be easily installed at a position relatively close to the combustion chamber, the structure being easily replaceable and attached in a state such that the exhaust purification efficiency is favorable. [Solution] This attachment structure for a catalyst support body is configured as follows: a catalyst support body 1 is constituted by an exhaust purification part 1A and an outer-edge attachment part 1B; the attachment part 1B is attached so as to be sandwiched by connection parts of a flow path so that the purification part 1A blocks the flow path.

No. of Pages : 19 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27341

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024635 A (19) INDIA (22) Date of filing of Application :11/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : LEAD-ACID BATTERY

(51) International classification :H01M 2/12 (71)Name of Applicant : (31) Priority Document No :2017-247379 1)GS YUASA INTERNATIONAL LTD. (32) Priority Date :25/12/2017 Address of Applicant :1, Inobaba-cho, Nishinosho, Kisshoin, (33) Name of priority country :Japan Minami-ku, Kyoto-shi, Kyoto 6018520 Japan (86) International Application No :PCT/JP2018/046274 (72)Name of Inventor : Filing Date :17/12/2018 1)AKIMOTO, Takashi

(87) International Publication No :WO 2019/131261 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : This lead-acid accumulator (100) comprises a lid (14). The lid (14) has a communication chamber (520) formed therein. The communication chamber (520) comprises an internal flow path formation part (432, 522) that is in communication with an air vent (321) and forms an internal flow path (Q) that is positioned on the other side from the vent (321) in a first direction. At least some of the surface of the internal flow path formation part (432, 522) has a textured part (T).

No. of Pages : 46 No. of Claims : 2

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27342

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024636 A (19) INDIA (22) Date of filing of Application :11/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : LEAD-ACID BATTERY

(51) International classification :H01M 2/12 (71)Name of Applicant : (31) Priority Document No :2017-247380 1)GS YUASA INTERNATIONAL LTD. (32) Priority Date :25/12/2017 Address of Applicant :1, Inobaba-cho, Nishinosho, Kisshoin, (33) Name of priority country :Japan Minami-ku, Kyoto-shi, Kyoto 6018520 Japan (86) International Application No :PCT/JP2018/046275 (72)Name of Inventor : Filing Date :17/12/2018 1)AKIMOTO, Takashi

(87) International Publication No :WO 2019/131262 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : This lead storage battery (100) is provided with a lid (14). The lid (14) has formed therein an external flow passage (530) that is connected with a connection chamber (520) via a ventilation hole (321) and that also is connected with a discharge port (405) in the lid (14). Formed inside the external flow passage (530) are partitioning walls (452, 454) that continuously extend along the entire width of the external flow passage (530). The remaining volume obtained by subtracting, from the total volume of the plurality of external spaces (460, 462, 464) partitioned by the partitioning walls (452, 454), the volume of a discharge-side external space (464) positioned nearest to the discharge port among the plurality of external spaces, is greater than the volume of the connection chamber (520).

No. of Pages : 51 No. of Claims : 2

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27343

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024892 A (19) INDIA (22) Date of filing of Application :13/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DISCONTINUOUS RECEPTION OPERATIONS AMONG MULTIPLE BANDWIDTH PARTS

(51) International classification :H04W 74/02 (71)Name of Applicant : (31) Priority Document No :62/589,628 1)FG INNOVATION COMPANY LIMITED (32) Priority Date :22/11/2017 Address of Applicant :Flat 2623, 26/F Tuen Mun Central (33) Name of priority country :U.S.A. Square, 22 Hoi Wing Road, Tuen Mun New Territories, Hong (86) International Application No :PCT/CN2018/117044 Kong China Filing Date :22/11/2018 (72)Name of Inventor : (87) International Publication No :WO 2019/101146 1)WEI, Chiahung (61) Patent of Addition to Application 2)CHOU, Chieming :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A user equipment (UE) for discontinuous reception (DRX) operation having a Downlink DRX Hybrid Automatic Repeat reQuest (HARQ) Round-Trip Time Timer (drx-HARQ-RTT-TimerDL) is disclosed. The UE comprises one or more non-transitory computer- readable media having computer-executable instructions embodied thereon; at least one processor coupled to the one or more non- transitory computer-readable media, and configured to execute the computer-executable instructions to perform the DRX operation, wherein the DRX operation comprises: starting the drx-HARQ-RTT-TimerDL from an initial value in a first symbol after an end of a corresponding transmission carrying a DL HARQ feedback, the DL HARQ feedback corresponding to downlink data. The initial value is represented in number of symbols of a BWP (bandwidth part) where the downlink data is received.

No. of Pages : 33 No. of Claims : 4

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27344

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024893 A (19) INDIA (22) Date of filing of Application :13/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : TEXTURED PRINTABLE NONWOVEN MEDIA

:B32B 27/12, B32B (71)Name of Applicant : 27/36, B32B 5/02, 1)3M INNOVATIVE PROPERTIES COMPANY (51) International classification B32B 3/30, B32B Address of Applicant :3M Center, P O Box 33427, Saint Paul 3/28 MN 55133-3427 U.S.A. (31) Priority Document No :62/599,128 (72)Name of Inventor : (32) Priority Date :15/12/2017 1)TERZIC, Denis (33) Name of priority country :U.S.A. 2)ZHOU, Ning (86) International Application No :PCT/IB2018/060127 3)TROTTER, Byron E.

Filing Date :14/12/2018 (87) International Publication No :WO 2019/116347 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A multilayer article including a film layer having a textured first surface and an opposite second surface, wherein the film layer is printable, and a nonwoven material layer bonded to the second surface of the film layer. The film layer may include a semi-crystalline polylactic acid and may be receptive to inkjet printing.

No. of Pages : 14 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27345

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024894 A (19) INDIA (22) Date of filing of Application :13/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : NEW CSI REFERENCE RESOURCE DEFINITION FOR CSI REPORT IN NR

:H04L 1/00, H04L (71)Name of Applicant : (51) International classification 5/00 1)TELEFONAKTIEBOLAGET LM ERICSSON (PUBL) (31) Priority Document No :62/587,509 Address of Applicant :SE-164 83, Stockholm Sweden (32) Priority Date :17/11/2017 (72)Name of Inventor : (33) Name of priority country :U.S.A. 1)LI, Shaohua (86) International Application No :PCT/SE2018/051194 2)FRENNE, Mattias Filing Date :19/11/2018 3)FAX‰R, Sebastian

(87) International Publication No :WO 2019/098938 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Embodiments of methods for providing a new Channel State Information (CSI) reference resource definition for CSI reports in New Radio (NR) are disclosed. In some embodiments, a method performed by a wireless device for Channel Quality Indicator (CQI) index reporting in a wireless communication system comprises deriving a CQI index to be reported to a network node, where the CQI index is derived assuming a hypothetical transmission on a CSI reference resource, wherein a wireless device-specific reference signal overhead in the CSI reference resource is consistent with one or more parameters, and reporting the CQI index to the network node. In another embodiment, a method performed by a radio access node reporting in a wireless communication system comprises receiving a CQI index from a wireless device for a CSI reference resource, wherein a wireless device-specific reference signal overhead in the CSI reference resource is consistent with one or more parameters.

No. of Pages : 59 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27346

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024933 A (19) INDIA (22) Date of filing of Application :13/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : EVOLUTIONARY ARCHITECTURES FOR EVOLUTION OF DEEP NEURAL NETWORKS

(51) International classification :G06N 3/00 (71)Name of Applicant : (31) Priority Document No :62598,409 1)COGNIZANT TECHNOLOGY SOLUTIONS U.S. (32) Priority Date :13/12/2017 CORPORATION (33) Name of priority country :U.S.A. Address of Applicant :211 Quality Circle College Station, TX (86) International Application No :PCT/US2018/064428 77845 U.S.A. Filing Date :07/12/2018 (72)Name of Inventor : (87) International Publication No :WO 2019/118290 1)LIANG, Jason Zhi (61) Patent of Addition to Application 2)MEYERSON, Elliot :NA Number 3)MIIKKULAINEN, Risto :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A system and method for evolving a deep neural network structure that solves a provided problem includes: a memory storing a candidate supermodule genome database having a pool of candidate supermodules having values for hyperparameters for identifying a plurality of neural network modules in the candidate supermodule and further storing fixed multitask neural networks; a training module that assembles and trains N enhanced fixed multitask neural networks and trains each enhanced fixed multitask neural network using training data; an evaluation module that evaluates a performance of each enhanced fixed multitask neural network using validation data; a competition module that discards supermodules in accordance with assigned fitness values and saves others in an elitist pool; an evolution module that evolves the supermodules in the elitist pool; and a solution harvesting module providing for deployment of a selected one of the enhanced fixed multitask neural networks, instantiated with supermodules selected from the elitist pool.

No. of Pages : 55 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27347

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047024984 A (19) INDIA (22) Date of filing of Application :15/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A CONCENTRATED SOLAR POWER RECEIVER

:F24S 40/10, F24S (71)Name of Applicant : (51) International classification 10/70, F24S 20/20, 1)VAST SOLAR PTY LTD F28D 1/047 Address of Applicant :Level 8 17-19 Bridge Street Sydney, (31) Priority Document No :2017904632 New South Wales 2000 Australia (32) Priority Date :15/11/2017 (72)Name of Inventor : (33) Name of priority country :Australia 1)FISHER, James Robert (86) International Application No :PCT/AU2018/051220 2)CURTIS, Allan Filing Date :15/11/2018 3)DREWES, Kurt Friedrich (87) International Publication No :WO 2019/095010 4)LESLIE, Bruce Alexander (61) Patent of Addition to Application 5)JOST, Timothy Peter :NA Number 6)BARTOS, Nicholas Paul :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A concentrated solar thermal receiver is mounted on a tower to receive concentrated solar thermal energy from a concentrating array of solar reflectors. The receiver comprises a single layered array of tubes configured to carry a heat transfer fluid such as sodium and defining in combination an exposed concentrated solar thermal energy receiving surface. The array of tubes have a lower fluid inlet header communicating with an inlet conduit, and an upper fluid outlet communicating with an outlet conduit. The tubes are arranged in a serpentine configuration and define a fluid flow path which is predominantly transverse and upward. The receiver includes a thermally insulating cover movable between an open position and a closed position in which the solar thermal energy receiving surface is covered to block or reduce the incidence of solar flux on the tubes or to reduce heat loss from the array of tubes when they are not operational.

No. of Pages : 17 No. of Claims : 36

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27348

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025011 A (19) INDIA (22) Date of filing of Application :15/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND APPARATUS FOR GUIDING AN ULTRASOUND PROBE

:A61B 8/00, A61B (71)Name of Applicant : (51) International classification 8/08 1)KONINKLIJKE PHILIPS N.V. (31) Priority Document No :17306614.3 Address of Applicant :High Tech Campus 5 5656 AE (32) Priority Date :21/11/2017 Eindhoven Netherlands (33) Name of priority country :EPO (72)Name of Inventor : (86) International Application No :PCT/EP2018/081291 1)ROUET, Laurence Filing Date :15/11/2018 2)DUFOUR, Cecile (87) International Publication No :WO 2019/101609 3)ENTREKIN, Robert, Randall (61) Patent of Addition to Application 4)NG, Gary, Cheng-How :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An ultrasound guidance method and system for an ultrasound imaging system in which user-defined start and end locations define a volume to be imaged. Guidance instructions for an ultrasound process performed on the defined volume may thereby be generated, to help guide the movement of an ultrasound probe during the ultrasound imaging process. The movement of the ultrasound probe is monitored using an ultrasound probe tracker to ensure that the user is adhering to the guidance instructions.

No. of Pages : 31 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27349

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025073 A (19) INDIA (22) Date of filing of Application :15/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SELECTIVELY PROVIDING CLOCK SIGNALS USING A PROGRAMMABLE CONTROL CIRCUIT

:H03K 5/15, H03K (71)Name of Applicant : (51) International classification 19/177 1)MOCHIZUKI, Mitsuru (31) Priority Document No :15/845957 Address of Applicant :Attn: Legal Dept. 2100 Logic Drive San (32) Priority Date :18/12/2017 Jose, CA 95124 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2018/064315 1)GAIDE, Brian, C. Filing Date :06/12/2018 2)GANUSOV, Ilya, K. (87) International Publication No :WO 2019/125781 3)NGUYEN, Chi, M. (61) Patent of Addition to Application 4)FU, Robert, I. :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The disclosed circuit arrangements include a logic circuit (105), input register logic (104) coupled to the logic circuit and including a first plurality of bistable circuits (202) and a control circuit (102) coupled to the input register logic. The control circuit is configured to generate a plurality of delayed clock signals (142, 148, 306, 308, 320, 326, 414, 416) from an input clock signal (150). The plurality of delayed clock signals include a first delayed clock signal (142, 148, 306, 308, 320, 326, 414, 416) and a second delayed clock signal (142, 148, 306, 308, 320, 326, 414, 416). The control circuit selectively provides one or more of the delayed clock signals or the input clock signal to clock inputs of the first plurality of bi-stable circuits and selectively provides one or more of the delayed clock signals or the input clock signal to the logic circuit. The control circuit includes a variable clock delay logic (302) circuit configured to equalize a clock delay to the input register logic with a clock delay to the logic circuit.

No. of Pages : 18 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27350

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025074 A (19) INDIA (22) Date of filing of Application :15/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DETECTING NON-WI-FI CERTIFIED DEVICES TRANSMITTING 802.11 SIGNALS

(51) International classification :H04W 16/14 (71)Name of Applicant : (31) Priority Document No :NA 1)MOCHIZUKI, Mitsuru (32) Priority Date :NA Address of Applicant :164 83 Stockholm Sweden (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :PCT/SE2017/051313 1)RICHARDS, Christopher Filing Date :20/12/2017 2)SMITH, Roland

(87) International Publication No :WO 2019/125245 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Embodiments herein relate to a method performed by a first radio device, for handling 802.11 signals transmitted by a second radio device. The second radio device is a non- Wi-Fi certified device. The method comprises receiving a transmission from the second radio device comprising 802.11 signal and detecting the second radio device being a non- Wi-Fi certified device, by determining the signaling behavior of the second radio device deviating from a Wi-Fi certified device's signaling behavior. Embodiments herein also relate to a first radio device, for handling 802.11 signals transmitted by non-Wi-Fi certified second radio device. The first radio device is configured to receive transmission from second radio device comprising 802.11 signal and detect the second radio device transmitting an 802.11 signal being a non-Wi-Fi certified device, by determining the signaling behavior of the second radio device deviating from that of a Wi-Fi certified device.

No. of Pages : 24 No. of Claims : 36

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27351

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025075 A (19) INDIA (22) Date of filing of Application :15/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : MEASUREMENT FOR FAST CELL ACCESS

:H04W 72/04, H04W (71)Name of Applicant : (51) International classification 88/06, H04W 72/08 1)MOCHIZUKI, Mitsuru (31) Priority Document No :62/587560 Address of Applicant :Karakaari 7 02610 Espoo Finland (32) Priority Date :17/11/2017 (72)Name of Inventor : (33) Name of priority country :U.S.A. 1)LUNDEN, Jari Petteri (86) International Application No :PCT/EP2018/081336 2)VIRTEJ, Elena Filing Date :15/11/2018 3)HENTTONEN, Tero

(87) International Publication No :WO 2019/096888 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The example embodiments of the invention provide at least a method and apparatus to measure, by a user equipment, a communication quality with at least one measured cell of a communication node while the user equipment is in an idle or inactive state; upon the user equipment transitioning to a connected state, determine by the user equipment that the communication quality with the at least one measured cell is larger than a threshold; and transmit information comprising a measurement report from the user equipment to a network equipment that the at least one measured cell meets the threshold for the network equipment to signal the user equipment to configure communication with the at least one measured cell without further measurements from the user equipment. Further, a method and apparatus to receive by a network equipment information comprising a measurement report from a user equipment which is waking from an idle or inactive state and seeking access to a serving cell communication, wherein the measurement report comprises an identification of a cell which met a communication quality threshold with the user equipment while the user equipment was in the idle or inactive state; compare the measurement report received by the network equipment from the user equipment to a predetermined threshold value, wherein based on the comparing the network equipment is caused to configure communication with the cell without further measurements from the user equipment, wherein based on the comparing the network equipment is caused to configure communication with the cell without further measurements from the user equipment; and send a signal from the network equipment to the user equipment with instructions for the user equipment to configure communication with the cell without further measurements from the user equipment.

No. of Pages : 43 No. of Claims : 41

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27352

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025076 A (19) INDIA (22) Date of filing of Application :15/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DEVICE FOR CONTROLLING A STRETCH-REDUCING MILL

(51) International classification :B21B 37/78 (71)Name of Applicant : (31) Priority Document No :10 2017 220 750.7 1)MOCHIZUKI, Mitsuru (32) Priority Date :21/11/2017 Address of Applicant :Eduard-Schloemann-Str. 4 40237 (33) Name of priority country :Germany D¼sseldorf Germany (86) International Application No :PCT/EP2018/081896 (72)Name of Inventor : Filing Date :20/11/2018 1)GOHR, Alexander

(87) International Publication No :WO 2019/101727 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention relates to a method for controlling a stretch-reducing mill in which tube ends of stretched tubes are optimised by controlling one or more motors of the stretch-reducing mill (1), said method comprising at least one wall thickness measurement on the discharge side and automatic adaptation of the magnitude of the change in the speed of the motors to the tube wall thickness profile, wherein the development over time of the changes in the speed of individual or all the motors is adapted automatically on the basis of the tube wall thickness measurement values.

No. of Pages : 9 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27353

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025100 A (19) INDIA (22) Date of filing of Application :15/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SMART DELIVERY NODE

:H04L 29/06, H04L (71)Name of Applicant : (51) International classification 29/08 1)MOCHIZUKI, Mitsuru (31) Priority Document No :NA Address of Applicant :164 83 Stockholm Sweden (32) Priority Date :NA 2)ZHU, Zhongwen (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :PCT/IB2017/058164 1)ZHU, Zhongwen

Filing Date :19/12/2017 (87) International Publication No :WO 2019/122966 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method, Delivery Node, DN, and Content Delivery Network, CDN, are optimized to deliver content of different categories. The DN is operative to receive a request for a content, obtain a determination of whether or not a category of content is associated with the requested content and responsive to the determination that no category of content is associated with the requested content, forward the request for the content towards an origin server and upon receiving a response from the origin server serve the content. The CDN comprises a plurality of DNs, a data processing service operative to obtain, from the DNs, and assemble, data sets into training and validation data formatted to be used for training and validating a Neural Network, NN. The CDN comprises a NN training service, operative to train and validate the NN and a configuration service, operative to configure the plurality of DNs with the trained and validated NN.

No. of Pages : 17 No. of Claims : 25

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27354

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025102 A (19) INDIA (22) Date of filing of Application :15/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PIXEL ARRAY AND DRIVING METHOD THEREFOR, AND DISPLAY APPARATUS

(51) International classification :G06K 9/00 (71)Name of Applicant : (31) Priority Document No :201810288463.0 1)MOCHIZUKI, Mitsuru (32) Priority Date :03/04/2018 Address of Applicant :No.10 Jiuxianqiao Rd., Chaoyang (33) Name of priority country :China District Beijing 100015 China (86) International Application No :PCT/CN2018/124149 (72)Name of Inventor : Filing Date :27/12/2018 1)TAN, Wenjing (87) International Publication No :WO 2019/192219 2)SHI, Shiming

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A pixel array and a driving method therefor, and a display apparatus comprising the pixel array. The pixel array is divided into at least one pixel distribution area (100) and comprises at least one standard pixel unit (P) and at least one non-standard pixel unit (P A) distributed in the at least one pixel distribution area (100). Compared with the standard pixel unit (P), the non-standard pixel unit (P A) lacks at least one sub-pixel (P A3), and the at least one lacking sub-pixel (P A3) is replaced with a missing sub-pixel area (A).

No. of Pages : 20 No. of Claims : 26

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27355

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025107 A (19) INDIA (22) Date of filing of Application :15/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : NON-VERBAL ENGAGEMENT OF A VIRTUAL ASSISTANT

:G06F 3/01, G06F (71)Name of Applicant : (51) International classification 3/0484, G06N 20/00 1)MICROSOFT TECHNOLOGY LICENSING, LLC (31) Priority Document No :15/849160 Address of Applicant :One Microsoft Way Redmond, (32) Priority Date :20/12/2017 Washington 98052-6399 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2018/065299 1)WHITE, Ryen William Filing Date :12/12/2018 2)WILSON, Andrew David (87) International Publication No :WO 2019/125873 3)WYGONIK, Gregg Robert (61) Patent of Addition to Application 4)CHANDRASEKARAN, Nirupama :NA Number 5)ANDRIST, Sean Edward :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Systems and methods related to engaging with a virtual assistant via ancillary input are provided. Ancillary input may refer to non- verbal, non-tactile input based on eye-gaze data and/or eye-gaze attributes, including but not limited to, facial recognition data, motion or gesture detection, eye-contact data, head-pose or head-position data, and the like. Thus, to initiate and/or maintain interaction with a virtual assistant, a user need not articulate an attention word or words. Rather the user may initiate and/or maintain interaction with a virtual assistant more naturally and may even include the virtual assistant in a human conversation with multiple speakers. The virtual assistant engagement system may utilize at least one machine-learning algorithm to more accurately determine whether a user desires to engage with and/or maintain interaction with a virtual assistant. Various hardware configurations associated with a virtual assistant device may allow for both near-field and/or far-field engagement.

No. of Pages : 33 No. of Claims : 12

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27356

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025198 A (19) INDIA (22) Date of filing of Application :15/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : TRANSMITTERS AND METHODS FOR OPERATING THE SAME

:H04L 25/02, H04L (71)Name of Applicant : (51) International classification 25/03 1)INTEL IP CORPORATION (31) Priority Document No :NA Address of Applicant :2200 Mission College Boulevard Santa (32) Priority Date :NA Clara, CA 95054 U.S.A. (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :PCT/US2018/023446 1)BELITZER, Alexander

Filing Date :21/03/2018 (87) International Publication No :WO 2019/182574 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A transmitter is provided. The transmitter includes a bus system including at least two bus lines. Further, the transmitter includes an envelope tracking circuit coupled to the at least two bus lines, and a plurality of power amplifiers. At least a first one of the plurality of power amplifiers, while in active state, is configured to selectively couple its input to the one of the at least two bus lines which is supplied with a supply voltage or a bias signal by the envelope tracking circuit that is based on an envelope of a first baseband signal related to a first radio frequency signal received by the first one of the plurality of power amplifiers for amplification.

No. of Pages : 24 No. of Claims : 25

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27357

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025260 A (19) INDIA (22) Date of filing of Application :16/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : LIGNOCELLULOSIC BIOMASS TREATMENT METHOD

(71)Name of Applicant : (51) International classification :C08H 8/00 1)MOCHIZUKI, Mitsuru (31) Priority Document No :1762609 Address of Applicant :1 & 4 avenue du Bois-Prau 92852 (32) Priority Date :20/12/2017 RUEIL-MALMAISON France (33) Name of priority country :France 2)INSTITUT NATIONAL DE RECHERCHE POUR (86) International Application No :PCT/EP2018/083542 L'AGRICULTURE, L'ALIMENTATION ET Filing Date :04/12/2018 L'ENVIRONNEMENT (87) International Publication No :WO 2019/120996 3)AGRO INDUSTRIES RECHERCHE ET (61) Patent of Addition to Application :NA DEVELOPPEMENT Number :NA (72)Name of Inventor : Filing Date 1)AYMARD, Caroline (62) Divisional to Application Number :NA 2)BOUILLON, Pierre-Antoine Filing Date :NA 3)BOURAS GALINIE, Meriem

(57) Abstract : The invention relates to a method for treating a lignocellulosic biomass comprising a solids content of at most 80% by weight, said method comprising the use of at least one reactor (9, 14) for treating said biomass, wherein, or the at least one of said reactors is supplied with biomass by a supply means (6, 11) creating an increase in pressure between the biomass inlet and the biomass outlet of said supply means, wherein said supply means is washed by circulation of a washing fluid between a washing inlet (7, 12) and a washing outlet (8, 13). According to the method, at least one portion of the washing fluid (8, 13) exiting from the fluid outlet of the or of at least one of the supply means (6, 11) is reintroduced into the washing inlet of the same supply means or of another of said supply means.

No. of Pages : 23 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27358

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025261 A (19) INDIA (22) Date of filing of Application :16/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : TRANSMISSION METHOD, RECEPTION METHOD, TRANSMITTING DEVICE, AND RECEIVING DEVICE

:H04B 10/116, H04B (71)Name of Applicant : (51) International classification 10/516, H04B 10/66 1)MOCHIZUKI, Mitsuru (31) Priority Document No :2017-242918 Address of Applicant :20000 Mariner Avenue, Suite 200, (32) Priority Date :19/12/2017 Torrance, California 90503 U.S.A. (33) Name of priority country :Japan (72)Name of Inventor : (86) International Application No :PCT/JP2018/046029 1)MURAKAMI, Yutaka

Filing Date :14/12/2018 (87) International Publication No :WO 2019/124236 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided is a transmission method with which it is possible to obtain information safely. In this transmission method, a light source is caused to illuminate at a first luminance in a first period and the light source is caused to illuminate in a second period alternatingly at a second luminance and at a third luminance that is lower than the second luminance, whereby an optical signal is transmitted from the light source.

No. of Pages : 284 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27359

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025262 A (19) INDIA (22) Date of filing of Application :16/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : FRONT-REAR COMBINED BRAKING SYSTEM OF A MOTORCYCLE AND RELATED MOTORCYCLE

:B60T 7/04, B60T (71)Name of Applicant : (51) International classification 8/26, B60T 11/06, 1)MOCHIZUKI, Mitsuru B60T 11/18 Address of Applicant :Viale Rinaldo Piaggio, 25 56025 (31) Priority Document No :102017000146418 Pontedera (PI) Italy (32) Priority Date :19/12/2017 (72)Name of Inventor : (33) Name of priority country :Italy 1)SAVINO, Emanuele (86) International Application No :PCT/IB2018/060180 2)ROSSELLINI, Walter

Filing Date :17/12/2018 (87) International Publication No :WO 2019/123206 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A front-rear combined braking system of motorcycle (100), allows a considerable design flexibility and comprises: a first member for operating the front brake (107) and a second member (1) for operating the rear brake both movable between a resting and an operating position; a hydraulic actuator (108) of the front brake (107), hydraulically operated by means of said first operating member; a mechanical actuator of the rear brake (109); a distribution device (3) inducing the actuation of said hydraulic actuator (108) in response to the actuation of the second operating member (1), which includes a floating piston (21) inserted in a corresponding hydraulic chamber (20), the floating piston (21) being apt to exert a pressure in a transmission fluid in said hydraulic chamber (20) due to the effect of the actuation of a hinged lever (12) connected to said second operating member (1) and to said mechanical actuator, wherein the hinged lever (12) is configured to provide a first mechanical control to said rear brake (109) and to produce a mechanical push apt to actuate said distribution device (3) and then the hydraulic actuator (108) of the front brake (107) when said second operating member (1) is actuated, and wherein the hinged lever (12), the second operating member (1) and the mechanical actuator of the rear brake (109) are connected by respective tie rods (6, 10, 15) to the ends (9, 11) and to an intermediate joint (8) of a distribution lever (7), respectively.

No. of Pages : 12 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27360

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025263 A (19) INDIA (22) Date of filing of Application :16/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : MOLDED BODY FORMED FROM CURABLE COMPOSITION

:C04B 28/26, B28B (71)Name of Applicant : 1/50, C04B 14/14, 1)MOCHIZUKI, Mitsuru (51) International classification C04B 14/36, C04B Address of Applicant :1621, Sakazu, Kurashiki-shi, Okayama 18/08 7100801 Japan (31) Priority Document No :2017-249674 (72)Name of Inventor : (32) Priority Date :26/12/2017 1)INADA, Shinya (33) Name of priority country :Japan 2)IKEHATA, Soichiro (86) International Application No :PCT/JP2018/046549 3)HADA, Saburo

Filing Date :18/12/2018 (87) International Publication No :WO 2019/131321 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided is a molded body having high strength, high toughness and excellent dimensional stability while maintaining incombustibility and fire resistance. The molded body is formed from a curable composition comprises (A) at least one aluminosilicate source, (B) an alkali metal hydroxide, (C) a calcium ion source, and (D) an alkali resistant fiber, wherein the aluminosilicate source (A) has an SiO2 content of 50% by mass or more based on the total mass of the aluminosilicate source (A), an amorphous ratio of 50% by mass or more, and an average particle diameter of 50 µm or less, and includes an aluminosilicate source (A) with an average particle diameter of 10 µm or less in an amount of 30% by mass or more based on the total mass of the aluminosilicate source (A).

No. of Pages : 30 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27361

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025360 A (19) INDIA (22) Date of filing of Application :16/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DISPLAY METHOD AND DISPLAY SYSTEM IN HYBRID VEHICLE

:B60K 6/22, B60K (71)Name of Applicant : (51) International classification 35/00 1)NISSAN MOTOR CO., LTD. (31) Priority Document No :NA Address of Applicant :2, Takara-cho, Kanagawa-ku, (32) Priority Date :NA Yokohama-shi, Kanagawa 2210023 Japan (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :PCT/JP2017/045209 1)HIGUCHI, Shinsuke Filing Date :15/12/2017 2)SENGOKU, Kazuma (87) International Publication No :WO 2019/116575 3)KAWAI, Keisuke (61) Patent of Addition to Application 4)KUROSAKI, Ryuji :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided is a display method in a hybrid vehicle, wherein an engine icon representing an engine, a battery icon representing a battery, and a flow icon representing a flow of energy between the engine icon and the battery icon are displayed on a display unit in accordance with the driving state of the hybrid vehicle. When the battery is being charged, the flow icon is displayed in a display mode indicating that energy is flowing between the engine and the battery. When the engine is stopped, the engine icon is displayed in a first display mode. When the engine is operating such that the engine speed is equal to or less than a reference speed, the engine icon is displayed in a second display mode different from the first display mode. When the engine speed is greater than the reference speed, the engine icon is displayed in a third display mode different from the first and second display modes.

No. of Pages : 30 No. of Claims : 14

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27362

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025361 A (19) INDIA (22) Date of filing of Application :16/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : OPERATING STATUS DISPLAY METHOD AND OPERATING STATUS DISPLAY SYSTEM

:B60K 35/00, B60K (71)Name of Applicant : (51) International classification 6/46, B60L 3/00, 1)NISSAN MOTOR CO., LTD. B60W 20/15 Address of Applicant :2, Takara-cho, Kanagawa-ku, (31) Priority Document No :NA Yokohama-shi, Kanagawa 2210023 Japan (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)HIGUCHI, Shinsuke (86) International Application No :PCT/JP2017/045211 2)SENGOKU, Kazuma Filing Date :15/12/2017 3)MIYACHI, Junji (87) International Publication No :WO 2019/116577 4)SHINOHARA, Tetsuya

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided is an operating status display method for an electric vehicle in which drive power is supplied from a battery to a travel motor, the method comprising an eco-level setting step for setting the eco-level of the operating status of the electric vehicle on the basis of the vehicle speed of the electric vehicle and the output of the travel motor, and a display step for displaying, in the passenger compartment, an eco-level gauge that expands and contracts in accordance with the eco-level.

No. of Pages : 38 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27363

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025362 A (19) INDIA (22) Date of filing of Application :16/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CATALYST WARM-UP CONTROL METHOD FOR HYBRID VEHICLES AND CATALYST WARM-UP CONTROL DEVICE FOR HYBRID VEHICLES

:B60W 20/16, B60K (71)Name of Applicant : 6/46, B60W 10/06, 1)NISSAN MOTOR CO., LTD. (51) International classification B60W 10/26, B60W Address of Applicant :2, Takara-cho, Kanagawa-ku, 20/13 Yokohama-shi, Kanagawa 2210023 Japan (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)KOBAYASHI, Azusa (33) Name of priority country :NA 2)ISHIKAWA, Tsuyoshi (86) International Application No :PCT/JP2017/045221 3)AKIYAMA, Hidekatsu Filing Date :15/12/2017 4)HIGUCHI, Shinsuke

(87) International Publication No :WO 2019/116587 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A catalyst warm-up control method for hybrid vehicles wherein a battery 3 supplies electric power to an electric motor 4 and is charged by an engine 1 for power generation, and exhaust gas discharged from the engine 1 is treated by a catalyst. This catalyst warm-up control method controls, when the catalyst temperature drops below the required warm-up temperature for activating the catalyst, the target rotational speed and the target torque of the engine 1 on the basis of the state of charge of the battery 3 while also controlling, when the target rotational speed drops below the lower rotational speed limit at which the catalyst can be heated to the required warm-up temperature, the target rotational speed to the required warm-up rotational speed that is at least the lower rotational speed limit.

No. of Pages : 28 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27364

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025363 A (19) INDIA (22) Date of filing of Application :16/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND DEVICE FOR CONTROLLING HYBRID VEHICLE

:B60W 10/26, B60K (71)Name of Applicant : (51) International classification 6/46, B60W 20/13 1)NISSAN MOTOR CO., LTD. (31) Priority Document No :NA Address of Applicant :2, Takara-cho, Kanagawa-ku, (32) Priority Date :NA Yokohama-shi, Kanagawa 2210023 Japan (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :PCT/JP2017/045210 1)HIGUCHI, Shinsuke Filing Date :15/12/2017 2)AKIYAMA, Hidekatsu (87) International Publication No :WO 2019/116576 3)KOBAYASHI, Azusa (61) Patent of Addition to Application 4)KAWAI, Keisuke :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method for controlling a hybrid vehicle that is provided with an engine, a battery for charging electric power generated by the engine, and a motor serving as a drive source, and that has a plurality of travel modes that can be selected by a mode operation. In this method for controlling a hybrid vehicle, the travel modes include a normal mode in which the battery is charged/discharged in accordance with the travel state, and a charge mode in which power generation by means of the engine is performed in accordance with a mode operation. The upper limit value of the charging electric power based on the generated electric power when charge mode is enabled is set so as to be lower than the upper limit value of the charging electric power based on the generated electric power when normal mode is enabled.

No. of Pages : 27 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27365

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025433 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CONTROL OF WIRELESS FIDELITY ACCESS FOR 5G OR OTHER NEXT GENERATION NETWORK

:H04W 36/24, H04W (71)Name of Applicant : (51) International classification 36/30 1)AT&T INTELLECTUAL PROPERTY I, L.P. (31) Priority Document No :15/854,099 Address of Applicant :675 W. Peachtree Street, Suite 4000, (32) Priority Date :26/12/2017 Atlanta, Georgia 30308 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2018/062396 1)MEREDITH, Sheldon Filing Date :23/11/2018 2)AUSTIN, Mark (87) International Publication No :WO 2019/133159 3)TIPTON, Rick

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Techniques for facilitating cellular or wireless fidelity access point selection are provided. In one example herein a method is provided comprising receiving, by a mobile device comprising a processor, first radio load data associated with a predicted radio load of a first channel of a first wireless device. Based on a first condition associated with the first radio load being determined to have been satisfied, the method can facilitate, by the mobile device, receiving second radio load data, indicative of a current radio load, from a second wireless device. Additionally, in response to a second condition associated with the current radio load being determined to have been satisfied, the method can utilize, by the mobile device, a second channel of the second wireless device for a communication.

No. of Pages : 28 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27366

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025434 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : WATER-SOLUBLE POLYMER ADHESIVE LAYERS

:A61K 9/00, A61K (71)Name of Applicant : (51) International classification 31/00 1)LTS Lohmann Therapie-Systeme AG (31) Priority Document No :10 2017 127 452.9 Address of Applicant :Lohmannstrasse 2, D-56626 Andernach (32) Priority Date :21/11/2017 Germany (33) Name of priority country :Germany (72)Name of Inventor : (86) International Application No :PCT/EP2018/082091 1)LINN, Michael Filing Date :21/11/2018 2)MLLER, Markus (87) International Publication No :WO 2019/101798 3)BAUER, Marius

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Disclosed is a multi-layer oral film comprising at least two non-adhesive layers each containing at least one hydrophobic polymer, and at least one water-soluble adhesive layer containing at least one water-soluble polymer and at least one plasticizer, wherein at least one of the at least two non-adhesive layers and/or the at least one water-soluble adhesive layer contains a pharmaceutically active substance and the at least two non-adhesive layers and the at least one water-soluble adhesive layer alternate in such a way that the at least one water-soluble adhesive layer is covered on both sides by at least one non-adhesive layer.

No. of Pages : 13 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27367

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025435 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CHEMICAL REACTOR WITH ADIABATIC CATALYTIC BEDS AND AXIAL FLOW

(51) International classification :B01J 8/04 (71)Name of Applicant : (31) Priority Document No :17202844.1 1)CASALE SA (32) Priority Date :21/11/2017 Address of Applicant :Via Pocobelli 6, CH-6900 Lugano (33) Name of priority country :EPO Switzerland (86) International Application No :PCT/EP2018/080270 (72)Name of Inventor : Filing Date :06/11/2018 1)RIZZI, Enrico

(87) International Publication No :WO 2019/101505 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Axial reactor for exothermic or endothermic chemical reactions, comprising at least a first catalytic bed (3) and a second catalytic bed (4) operating in series and at least one heat exchanger (5) between the two catalytic beds, wherein the first catalytic bed has a collector bottom(6) having a box-like structure with flat and parallel walls,which are gas-permeable,and a plurality of parallel channels (15, 16) defined between the walls, wherein a first series of said channels collects the gaseousflow exitingthe catalytic bed and passing through the first wall, said gaseous flow is directed towards the heat exchanger, and the flow exitingthe exchanger is directed towards the second catalytic bed via a second series of said channels of the collector bottom.

No. of Pages : 19 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27368

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025436 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROTECTION OF TRAFFIC BETWEEN NETWORK FUNCTIONS

:H04L 29/06, H04W (71)Name of Applicant : 12/08, H04W 12/02, 1)TELEFONAKTIEBOLAGET LM ERICSSON (PUBL) (51) International classification H04W 4/50, H04W Address of Applicant :SE-164 83, Stockholm Sweden 28/16 (72)Name of Inventor : (31) Priority Document No :62/588,665 1)SAARINEN, Pasi

(32) Priority Date :20/11/2017 (33) Name of priority country :U.S.A. (86) International Application No :PCT/EP2018/079831 Filing Date :31/10/2018 (87) International Publication No :WO 2019/096586 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Methods and network equipment in a core network for intercepting protected communication between core network (CN) network functions (NFs). A method performed by network equipment in a core network may include establishing a first connection with a first NF for which the network equipment serves as a proxy and establishing, on behalf of the first NF, a second connection that is towards a second NF and that is secure. The method may also include selectively forwarding communication between the first and second NFs over the first and second connections, including transmitting and/or receiving the communication on behalf of the first NF over the second connection. The method may further include intercepting the communication that the network equipment selectively forwards between the first and second NFs.

No. of Pages : 28 No. of Claims : 36

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27369

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025437 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : FLESH-ILLUMINATING DEVICE

:A61N 5/00, A61N (71)Name of Applicant : 5/06, F21L 4/00, 1)PROJECT LEAH, LLC (51) International classification F21L 4/02, F21V Address of Applicant :8328 Dr. MLK Jr. St. N, St. Petersburg, 1/00 FL 33702 U.S.A. (31) Priority Document No :62/588,241 2)NANEV, Aleksandar (32) Priority Date :17/11/2017 (72)Name of Inventor : (33) Name of priority country :U.S.A. 1)NANEV, Aleksandar

(86) International Application No :PCT/US2018/061891 Filing Date :19/11/2018 (87) International Publication No :WO 2019/100034 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A flesh-illuminating device includes: a light source configured to generate light usable to illuminate flesh of a user; a shape holder operably connected to the light source, the shape holder configured to hold the light source in place so that the light source can il¬ luminate the user's flesh; a user interface operably connected to the light source, the user interface configured to allow the user to control the light source; and a power source operably connected to the light source, the power source configured to provide power to the flesh-illuminating device.

No. of Pages : 41 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27370

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025497 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PUNCTURING PT-RS BASED ON A COLLISION BETWEEN PT-RS AND CORESET

(71)Name of Applicant : (51) International classification :H04L 5/00 1)QUALCOMM INCORPORATED (31) Priority Document No :62/621,801 Address of Applicant :ATTEN: International IP (32) Priority Date :25/01/2018 Administration, 5775 Morehouse Drive, San Diego, California (33) Name of priority country :U.S.A. 92121-1714 U.S.A. (86) International Application No :PCT/US2018/066565 (72)Name of Inventor : Filing Date :19/12/2018 1)BAI, Tianyang (87) International Publication No :WO 2019/147362 2)LUO, Tao (61) Patent of Addition to Application :NA 3)MANOLAKOS, Alexandros Number :NA 4)YOO, Jae Won Filing Date 5)SANKAR, Hari (62) Divisional to Application Number :NA 6)SORIAGA, Joseph Binamira Filing Date :NA 7)AMINZADEH GOHARI, Amir

(57) Abstract : A transmitter, such as a base station, identifies a potential collision between a first set of resources configured for a CORESET for a receiver and a second set of resources configured for a PT-RS for the receiver. The apparatus may determine whether colliding resources in the CORESET are configured/used for a control transmission or a data transmission. The apparatus punctures the PT-RS based on whether the colliding resources in the CORESET are configured/used for the control transmission (e.g., PDCCH). For example, the apparatus may puncture the PT-RS only for resource blocks of the CORESET colliding with the control transmission without puncturing the PT-RS over an entire set of the colliding resources configured for the CORESET. A receiver may similarly identify potential collisions and determine whether PT-RS will be punctured based on whether the colliding resources in the CORESET are configured/used for a control transmission or a data transmission.

No. of Pages : 29 No. of Claims : 28

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27371

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025517 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN X-RAY IMAGING DEVICE

:A61B 6/00, A61B (71)Name of Applicant : 6/02, A61B 6/06, 1)ADAPTIX LTD (51) International classification G21K 1/02, G21K Address of Applicant :BEGBROKE SCIENCE PARK, 5/02 CENTRE FOR INNOVATION AND ENTERPRISE (CIE), (31) Priority Document No :1719599.1 WOODSTOCK ROAD, BEGBROKE, OXFORDSHIRE OX5 (32) Priority Date :25/11/2017 IPF, UNITED KINGDOM U.K. (33) Name of priority country :U.K. (72)Name of Inventor : (86) International Application No :PCT/GB2018/053400 1)WES MCKEAN Filing Date :23/11/2018 2)STEVE WELLS (87) International Publication No :WO 2019/102216 3)GIL TRAVISH

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An x-ray imaging device (10) comprising at least two substantially planar panels (20, 21), each panel comprising a plurality of x-ray emitters housed in a vacuum enclosure, wherein the at least two panels each have a central panel axis (28) and are arranged such that their central panel axes are non-parallel to one another, the device further comprising a panel retaining means and arranged such that the panel retaining means retains the at least two panels stationary in relation to an object during x-raying of the object.

No. of Pages : 16 No. of Claims : 21

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27372

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025518 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ELECTROCHEMICAL DETECTION METHOD BASED ON MARKING WITH MARKERS

:G01N 33/543, G01N (71)Name of Applicant : (51) International classification 27/48 1)BEIJING SAVANT BIOTECHNOLOGY CO., LTD. (31) Priority Document No : 201810699669. Address of Applicant :F4E, 4th Floor, Building 14, No.2 (32) Priority Date :29/06/2018 Kechuang 5th Street, Tongzhou District Beijing 101111 China (33) Name of priority country :China 2)TIANJIN SAVANT BIOTECHNOLOGY CO., LTD. (86) International Application No :PCT/CN2018/123835 (72)Name of Inventor : Filing Date :26/12/2018 1)LIN, Si

(87) International Publication No :WO 2020/000959 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : An electrochemical detection method based on marking with markers, the method comprising the following steps: (1) marking an antibody of a substance to be detected with a marker; (2) marking another antibody of the substance to be detected with one of a pair of substances having specific affinity; (3) marking nano microspheres with the other of the pair of substances having specific affinity; and (4) performing an electrochemical detection process. Using the electrochemical properties of the markers and the high sensitivity of the electrochemical method to the detection of the markers, immune complexes are marked using markers, the immune complexes are collected by means of the nano microspheres, and then the nano microspheres carrying the immune compounds enrich the electrode surface by means of separation, greatly increasing detection sensitivity; the present method has high stability, good repeatability, and reliable and accurate results, and can implement rapid and sensitive detection.

No. of Pages : 41 No. of Claims : 30

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27373

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025519 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PALLET SHELFING APPARATUS

:B66F 9/06, B65D (71)Name of Applicant : (51) International classification 19/00, B66F 9/12 1)SOFTENLIFT LTD. (31) Priority Document No :256019 Address of Applicant :21 Bazelet, 4032271 Kfar Yona Israel (32) Priority Date :30/11/2017 (72)Name of Inventor : (33) Name of priority country :Israel 1)PICHA, Guy

(86) International Application No :PCT/IL2018/051304 Filing Date :29/11/2018 (87) International Publication No :WO 2019/106669 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A pallet shelfing apparatus for shelf racking of a pallet in a shelf structure, configured to operate in loading, unloading, and hibernate/transport modes. A transporter thereof transports and positions the platform. On a platform configured for loading and unloading the pallet from a selected shelf of the shelf structure, at least one deployable pallet carrying structure is mounted and configured for carrying, reaching and engaging the pallet. At least one deployable anchor, for temporarily stabilizing the pallet shelfing apparatus against at least one hold is deployed in the loading or unloading mode, to engage the at least one hold for stabilizing, and features the at least one hold located off ground, off ceiling, or inside the volume confined by the convex hull of the shelf structure. This volume may be disposed between the platform and at least one of the at least one hold, while in the loading or unloading mode, at least before changing mode into the hibernate/transport mode. The at least one deployable anchor is configured to change the elevation of the at least one deployable pallet carrying structure, after the carrying structure initially engages the pallet.

No. of Pages : 93 No. of Claims : 24

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27374

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025535 A (19) INDIA (22) Date of filing of Application :17/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : RESOURCE ALLOCATION METHOD AND DEVICE

(51) International classification :H04B 7/155 (71)Name of Applicant : (31) Priority Document No :201711297552.3 1)HUAWEI TECHNOLOGIES CO., LTD. (32) Priority Date :08/12/2017 Address of Applicant :Huawei Administration Building, (33) Name of priority country :China Bantian, Longgang District, Shenzhen, Guangdong 518129 P.R. (86) International Application No :PCT/CN2018/119843 China Filing Date :07/12/2018 (72)Name of Inventor : (87) International Publication No :WO 2019/110011 1)WU, Dan (61) Patent of Addition to Application 2)CHEN, Lei :NA Number 3)QIU, Jing :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Embodiments of the application provide a resource allocation method. The method comprises: a relay node sending a first message to a base station, the first message carrying information of symbols available for backhaul transmission; and the relay node receiving a second message from the base station, the second message indicating information of symbols to be occupied for performing backhaul transmission to the relay node, the information of the available symbols comprising one or more of the following: the number of available symbols, serial numbers of the available symbols, the number of unavailable symbols, serial numbers of the unavailable symbols, a propagation delay of a backhaul link, and a transmission-receiving switching time of a first apparatus. For backhaul transmission, the relay node is capable of reporting the maximum number of available symbols for BH downlink transmission to the base station by means of the first message. The base station sends the second message to the relay node to allocate the number of symbols and serial numbers of the symbols to the relay node to perform backhaul transmission.

No. of Pages : 33 No. of Claims : 28

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27375

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025655 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : BLOCKCHAIN-IMPLEMENTED SYSTEMS AND METHODS FOR CONCURRENT BYTECODE INTERPRETATION

:G06F 21/64, G06F (71)Name of Applicant : (51) International classification 9/46 1)NCHAIN HOLDINGS LIMITED (31) Priority Document No :1720767.1 Address of Applicant :Fitzgerald House 44 Church Street St. (32) Priority Date :13/12/2017 John's Antigua And Barbuda (33) Name of priority country :U.K. (72)Name of Inventor : (86) International Application No :PCT/IB2018/059757 1)CHAN, Ying Filing Date :07/12/2018 2)KRAMER, Dean

(87) International Publication No :WO 2019/116184 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Computer implemented methods are provided that create and/or validate a spending blockchain transaction that includes i) a plurality of locking scripts each representing an instance of an execution thread (which can be execution threads that are forked from an execution thread represented by a locking script of a previous blockchain transaction and/or execution threads of at least one previous blockchain transaction that are managed and/or controlled for inter-thread communication and control) or ii) a locking script representing an instance of an execution thread joined from a plurality of execution threads represented at least one previous blockchain transaction. Once created and/or validated, the spending blockchain transaction can be communicated on a blockchain network for storage in a blockchain ledger. The blockchain transactions can implement thread-specific locking scripts and associated fork, join and barrier constructs for concurrent or asynchronous threads of execution. The transactions can be validated and stored in a blockchain ledger. The blockchain transactions can be used as part of a smart contract.

No. of Pages : 100 No. of Claims : 19

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27376

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025659 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : MODIFIED NOROVIRUS VP1 PROTEINS AND VLPS COMPRISING MODIFIED NOROVIRUS VP1 PROTEINS

:C12N 15/40, A01H (71)Name of Applicant : 5/00, A61K 39/12, 1)MEDICAGO INC. (51) International classification A61P 31/14, A61P Address of Applicant :600 - 1020 Route de l'Eglise Quebec, 37/04 Qubec G1V 3V9 Canada (31) Priority Document No :62/593006 (72)Name of Inventor : (32) Priority Date :30/11/2017 1)LAVOIE, Pierre-Olivier (33) Name of priority country :U.S.A. 2)D'AOUST, Marc-Andre

(86) International Application No :PCT/CA2018/051530 Filing Date :30/11/2018 (87) International Publication No :WO 2019/104439 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Nucleic acids encoding modified norovirus VP1 proteins, and VLPs comprising one or more of the modified norovirus VP1 proteins are provided. Methods for modified norovirus VP1 protein, and norovirus VLP, production in plants, portions of the plant or a plant cell, are also described.

No. of Pages : 128 No. of Claims : 21

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27377

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025676 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : THERAPEUTIC AGENT FOR GLAUCOMA COMPRISING FP AGONIST AND B-BLOCKER

:A61K 31/335, (71)Name of Applicant : A61K 9/06, A61K 1)ONO PHARMACEUTICAL CO., LTD. (51) International classification 9/08, A61K 31/138, Address of Applicant :1-5, Doshomachi 2-chome, Chuo-ku, A61K 31/343 Osaka-shi, Osaka 5418526 Japan (31) Priority Document No :2017-244573 (72)Name of Inventor : (32) Priority Date :21/12/2017 1)YAMANE, Shinsaku (33) Name of priority country :Japan 2)NAKAYAMA, Satoshi (86) International Application No :PCT/JP2018/047102 3)NAGAI, Kazufumi Filing Date :20/12/2018 4)MORIYUKI, Kazumi (87) International Publication No :WO 2019/124523 5)KARAKAWA, Tomohiro

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : In the present invention, an efficacious therapy for glaucoma is discovered and provided as a medicine. A combination of the present invention, in particular a combination of 2-propanyl 4-{(3S, 5aR, 6R, 7R, 8aS)-6-[(1E, 3R)-4-(2, 5-difluoro-phenoxy)-3-hydroxy-1- butene-1-yl]-7-hydroxy-octahydro-2H-cyclopenta [b] oxepine-3-yl}butanoate and a blocker is useful as a therapeutic agent for glaucoma since intraocular tension depressive action is increased and an effect of maintaining the intraocular tension depressive action is provided, compared to single-agent administration of each medical agent.

No. of Pages : 11 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27378

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025677 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : USE OF A LIGNIN FRACTION AS A HUMAN AND ANIMAL FOOD SUPPLEMENT INGREDIENT

:A23L 3/3472, A01N (71)Name of Applicant : 31/16, A01N 65/00, 1)GREEN INNOVATION GMBH (51) International classification A61K 36/00, C07G Address of Applicant :Grabenweg 68, A-6020 Innsbruck 1/00 Austria (31) Priority Document No :102017000148931 2)UPM-KYMMENE CORPORATION (32) Priority Date :22/12/2017 (72)Name of Inventor : (33) Name of priority country :Italy 1)LEONARDI, Giuliano (86) International Application No :PCT/EP2018/084310 2)PIETARINEN, Suvi Filing Date :11/12/2018 3)HBSCH, Christian

(87) International Publication No :WO 2019/121147 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The use of a lignin fraction as a human and animal food supplement ingredient, as well as food supplements comprising the same, are disclosed.

No. of Pages : 29 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27379

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025679 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A HERMETIC, INSECTICIDAL FOOD STORAGE BAG, USE OF IT AND A METHOD FOR ITS PRODUCTION

:A01N 25/34, A01N (71)Name of Applicant : 53/00, B65D 65/42, 1)Vestergaard SA (51) International classification B65D 30/08, B65D Address of Applicant :Place Saint-Fran§ois 1, 1003 Lausanne 81/28 Switzerland (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)VESTERGAARD FRANDSEN, Mikkel (33) Name of priority country :NA 2)WEIS, Thomas (86) International Application No :PCT/EP2017/079877 3)MORTENSEN, Allan

Filing Date :21/11/2017 (87) International Publication No :WO 2019/101289 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A crop storage bag (1) made is of a high-strength textile (7) material which is extrusion-coated or laminated with a multilayer film (8) that comprises an insecticidal layer (9) in addition to a hermetic layer (10) which prevents oxygen from entering the bag. This oxygen barrier suffocates the insects inside the bag, and the insecticide kills insects that try to bore through the bag.

No. of Pages : 24 No. of Claims : 33

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27380

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025680 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : THREE-DIMENSIONAL MEASUREMENT DEVICE

:G01B 11/24, G06T (71)Name of Applicant : (51) International classification 7/521 1)CKD CORPORATION (31) Priority Document No :2017-234859 Address of Applicant :250, Ouji 2-chome, Komaki-shi, Aichi (32) Priority Date :07/12/2017 4858551 Japan (33) Name of priority country :Japan (72)Name of Inventor : (86) International Application No :PCT/JP2018/031883 1)ISHIGAKI, Hiroyuki Filing Date :29/08/2018 2)MAMIYA Takahiro

(87) International Publication No :WO 2019/111453 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided is a three-dimensional measurement device capable of enhancing measurement accuracy and measurement efficiency. This three-dimensional measurement device 1 uses an interference fringe image obtained through imaging by imaging systems 4A, 4B to acquire, at a prescribed measurement range interval, a plurality of sets of intensity image data for each coordinate position in a prescribed measurement region on a workpiece W at prescribed positions in the optical axis direction. Next, the three-dimensional measurement device 1 determines the optical-axis-direction focal positions at each coordinate position on the basis of the plurality of sets of intensity image data and specifies orders corresponding to the optical-axis-direction focal positions as orders for the coordinate positions. Further, the three-dimensional measurement device 1 acquires light phase information for the optical-axis-direction focal positions at each coordinate position in the measurement region and carries out three-dimensional measurement of the coordinate positions on the basis of the phase information for the coordinate positions and the orders for the coordinate positions.

No. of Pages : 46 No. of Claims : 7

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27381

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025682 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : APPARATUS AND METHOD FOR BEAM FAILURE RECOVERY IN A WIRELESS COMMUNICATION SYSTEM

(51) International classification :H04W 72/04 (71)Name of Applicant : (31) Priority Document No :62/590382 1)FG INNOVATION COMPANY LIMITED (32) Priority Date :24/11/2017 Address of Applicant :Flat 2623, 26/F Tuen Mun Central (33) Name of priority country :U.S.A. Square 22 Hoi Wing Road, Tuen Mun, New Territories Hong (86) International Application No :PCT/CN2018/115276 Kong China Filing Date :13/11/2018 (72)Name of Inventor : (87) International Publication No :WO 2019/100972 1)CHENG, Yuhsin (61) Patent of Addition to Application 2)CHEN, Hungchen :NA Number 3)CHOU, Chieming :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A method for beam failure recovery in a wireless communication system is provided. The wireless communication system includes a UE and a base station. The method includes the following actions. A first BWP configuration, a second BWP configuration and a BWP inactivity timer are received by the UE from the base station. The UE is configured to be switched from a first BWP to a second BWP when the BWP inactivity timer expires, and the first BWP corresponds to the first BWP configuration and the second BWP corresponds to the second BWP configuration. Whether a beam failure recovery procedure is triggered is determined by the UE. The BWP inactivity timer is stopped by the UE when the beam failure recovery procedure is triggered.

No. of Pages : 16 No. of Claims : 28

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27382

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025696 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ACCESSORY DEVICES OF AN OSTOMY SYSTEM, AND RELATED METHODS FOR COMMUNICATING LEAKAGE STATE

:A61F 5/44, A61F (71)Name of Applicant : (51) International classification 5/443, A61F 5/445 1)COLOPLAST A/S (31) Priority Document No :PA 2017 70997 Address of Applicant :Holtedam 1, 3050 Humlebaek Denmark (32) Priority Date :22/12/2017 (72)Name of Inventor : (33) Name of priority country :Denmark 1)HANSEN, Jais Ask (86) International Application No :PCT/DK2018/050396 2)HVID, Niels Filing Date :20/12/2018 3)DAUGAARD-JENSEN, Daniel Gewecke (87) International Publication No :WO 2019/120440 4)SOERENSEN, Peter Flintholm (61) Patent of Addition to Application 5)ANDERSEN, Dan Boegsted :NA Number 6)SPEIERMANN, Finn :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure provides a method, performed in an accessory device, for communicating a leakage state of an ostomy appliance, wherein the accessory device comprises an interface configured to communicate with one or more devices of an ostomy system, the one or more devices comprising a monitor device, and/or the ostomy appliance configured to be placed on a skin surface of a user. The method comprises obtaining monitor data from the one or more devices, the monitor data being indicative of presence of fluid at a proximal side of a first adhesive layer of the ostomy appliance towards the skin surface; determining a leakage state at the proximal side of the first adhesive layer of the ostomy appliance based on the monitor data, and communicating the leakage state of the ostomy appliance via the interface.

No. of Pages : 90 No. of Claims : 19

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27383

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025710 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : RECHARGEABLE ZINC-AIR BATTERY WITH PERFORATED-SHELL ACTIVE PARTICLES

:B22F 1/00, B22F (71)Name of Applicant : 1/02, B22F 9/02, 1)PHINERGY LTD. (51) International classification H01M 4/04, H01M Address of Applicant :2 Yodfat Street, P.O Box 1290, 4/24 7129104 Lod Israel (31) Priority Document No :62/589,878 (72)Name of Inventor : (32) Priority Date :22/11/2017 1)TZIDON, Dekel (33) Name of priority country :U.S.A. 2)LANG, Joel

(86) International Application No :PCT/IL2018/051260 Filing Date :21/11/2018 (87) International Publication No :WO 2019/102462 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Powders, electrodes, zinc-air batteries and corresponding methods are provided. Powders comprise perforated shells having a size of at least 100nm and comprising openings smaller than 10nm. The shells are electrically conductive and/or comprise an electrically conductive coating. Powders further comprise zinc and/or zinc oxide which resides at least partially within the shells. Methods comprise wetting the shells with a zinc solution to yield at least partial penetration of the zinc solution through the openings, and coating zinc internally in the shells by application of electric current to the shells. Upon electrode preparation from the powder, cell construction and cell operation, zinc is oxidized to provide energy and the shells retain formed Zn O therewith, providing sufficient volume for the associated expansion and maintaining thereby the mechanical stability and structure of the electrode - to enable many operation cycles of the rechargeable zinc-air batteries.

No. of Pages : 12 No. of Claims : 17

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27384

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025711 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : MEDICAL SYSTEM AND METHOD OF MANUFACTURING THEREOF

:A61B 5/00, A61B (71)Name of Applicant : (51) International classification 5/145, A61B 5/1486 1)F. HOFFMANNLA ROCHE AG (31) Priority Document No :17209756.0 Address of Applicant :124 Grenzacherstrasse, CH-4070 Basel (32) Priority Date :21/12/2017 Switzerland (33) Name of priority country :EPO (72)Name of Inventor : (86) International Application No :PCT/EP2018/086139 1)KONYA, Ahmet

Filing Date :20/12/2018 (87) International Publication No :WO 2019/122095 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention discloses a medical system (110).The medical system (110)comprises: a.a housing (112); b.a preassembled functional module (118) received in the housing (112), the preassembled functional module (118) comprising b1.an analytical sensor (120) for detecting at least one analyte in a body fluid of a user; b2.an electronics unit (126) electrically connected to the analytical sensor (120); and b3.an insertion component (130) for inserting the analytical sensor (120) into a body tissue of the user; c.at least one removable protective cap (134) connected to the housing (112), covering the preassembled functional module (118).

No. of Pages : 33 No. of Claims : 14

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27385

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025712 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ADENO-ASSOCIATED VIRUS VARIANT CAPSIDS AND USE FOR INHIBITING ANGIOGENESIS

:C12N 7/00, A61K (71)Name of Applicant : (51) International classification 35/76, C12N 15/86, 1)4D MOLECULAR THERAPEUTICS INC. A61K 9/00 Address of Applicant :5980 Horton Street, Suite 460, (31) Priority Document No :62/590,976 Emeryville, CA 94608 U.S.A. (32) Priority Date :27/11/2017 (72)Name of Inventor : (33) Name of priority country :U.S.A. 1)KIRN, David (86) International Application No :PCT/US2018/062478 2)KOTTERMAN, Melissa Filing Date :26/11/2018 3)SCHAFFER, David (87) International Publication No :WO 2019/104279 4)SZYMANSKI, Paul (61) Patent of Addition to Application 5)FRANCIS, Peter :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided herein are variant adeno-associated virus (AAV) capsid proteins having one or more modifications in amino acid sequence relative to a parental AAV capsid protein, which, when present in an AAV virion, confer increased infectivity of one or more types of retinal cells as compared to the infectivity of the retinal cells by an AAV virion comprising the unmodified parental AAV capsid protein. Also provided are recombinant AAV virions and pharmaceutical compositions thereof comprising a variant AAV capsid protein as described herein, methods of making these rAAV capsid proteins and virions, and methods for using these rAAV capsid proteins and virions in research and in clinical practice, for example in, e.g., the delivery of nucleic acid sequences to one or more cells of the retina for the treatment of retinal disorders and diseases.

No. of Pages : 132 No. of Claims : 26

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27386

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025839 A (19) INDIA (22) Date of filing of Application :19/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD FOR MANAGING A PISTON PUMP FOR A HEAT ENGINE

:F02D 41/30, F04B (71)Name of Applicant : (51) International classification 17/04 1)CONTINENTAL AUTOMOTIVE FRANCE (31) Priority Document No :1762446 Address of Applicant :1, Avenue Paul Ourliac Intellectual (32) Priority Date :19/12/2017 Property 31100 TOULOUSE France (33) Name of priority country :France 2)CONTINENTAL AUTOMOTIVE GMBH (86) International Application No :PCT/FR2018/053183 (72)Name of Inventor : Filing Date :11/12/2018 1)MOINE, Xavier

(87) International Publication No :WO 2019/122590 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention relates to a method for managing a piston pump (10) comprising a piston (110) slidably mounted in a guide (120) so as to form a compression chamber, and a solenoid (130) suitable for controlling the movement of the piston (110) between a top position in which the compression chamber is filled with fuel (C) and a bottom position in which the compression chamber is emptied of fuel (C), said method comprising a step of determining the time required for the piston (110) to move from the bottom position to the top position, in order to determine a maximum control time (D), and a step in which the piston (110) is controlled by the solenoid (130) for a length of time shorter than the maximum time determined (D), such as to move the piston (110) to an intermediate position located between the bottom position and the top position such that it does not reach the top position.

No. of Pages : 10 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27387

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025875 A (19) INDIA (22) Date of filing of Application :19/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SECURITY-ENHANCED ORIGINATION OF BLOCKCHAIN TRANSACTIONS

:H04L 9/32, H04L (71)Name of Applicant : (51) International classification 9/30 1)NCHAIN HOLDINGS LIMITED (31) Priority Document No :1721021.2 Address of Applicant :Fitzgerald House, 44 Church Street, St. (32) Priority Date :15/12/2017 John's, Antigua and Barbuda Antigua And Barbuda (33) Name of priority country :U.K. (72)Name of Inventor : (86) International Application No :PCT/IB2018/059922 1)BARTOLUCCI, Silvia Filing Date :12/12/2018 2)BERNAT, Pauline (87) International Publication No :WO 2019/116250 3)JOSEPH, Daniel

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A blockchain-implemented transaction from an originator node is to be broadcast. The originator node is communicatively coupled to proxy nodes. The method, implemented by a proxy node, includes: receiving a transaction including an input taking x+r units of computing resources, an output providing x units to the output address and another output providing d+r units to a 1-of-n multi- signature address unlockable by any one of a set of private keys associated the proxy nodes. The proxy node selects a quantity of computing resources, t units, to be allocated to the proxy node for broadcasting the transaction and having it included in the blockchain and generates a further transaction taking d+r units sourced from the multi-signature address and an output providing t units to the proxy node. The proxy node broadcasts both transactions timed to permit their inclusion in the same block of the blockchain.

No. of Pages : 26 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27388

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025907 A (19) INDIA (22) Date of filing of Application :19/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ION GENERATOR, APPLIANCE, AIR-CONDITIONING-SPACE PROVIDING METHOD, STRESS REDUCING METHOD, DEGREE-OF-CONCENTRATION IMPROVING METHOD, AND COMFORT LEVEL IMPROVING METHOD

(51) International classification :H01T 23/00 (71)Name of Applicant : (31) Priority Document No :2017-228285 1)SHARP KABUSHIKI KAISHA (32) Priority Date :28/11/2017 Address of Applicant :1, Takumi-cho, Sakai-ku, Sakai City, (33) Name of priority country :Japan Osaka 590-8522 Japan (86) International Application No :PCT/JP2018/005293 (72)Name of Inventor : Filing Date :15/02/2018 1)FUNAMORI, Hirokazu (87) International Publication No :WO 2019/106852 2)YAMAMOTO, Satohiko (61) Patent of Addition to Application 3)YAMADA, Keitaro :NA Number 4)MATSUDA, Yuko :NA Filing Date 5)NANJO, Hiroki

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The purpose of the present invention is to produce a favorable effect on the mental state of a user in an air-conditioned space by emission of ions. An ion generator (100) brings about an ion concentration in which the number of ions per 1 cm3 is 50,000 or more in an air-conditioned space.

No. of Pages : 26 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27389

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047025909 A (19) INDIA (22) Date of filing of Application :19/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DOWNHOLE INFLOW PRODUCTION RESTRICTION DEVICE

:E21B 33/128, E21B (71)Name of Applicant : (51) International classification 43/00, E21B 34/06, 1)Welltec Oilfield Solutions AG E21B 43/12 Address of Applicant :Baarerstrasse 96, CH-6300 Zug (31) Priority Document No :17205082.5 Switzerland (32) Priority Date :04/12/2017 (72)Name of Inventor : (33) Name of priority country :EPO 1)KUMAR, Satish

(86) International Application No :PCT/EP2018/083366 Filing Date :03/12/2018 (87) International Publication No :WO 2019/110517 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to a downhole inflow production restriction device (1) for mounting in an opening (2) in a well tubular metal structure (3) arranged in a wellbore, the downhole inflow production restriction device (1) comprising a device opening (5), and a brine dissolvable element (6) configured to prevent flow from within the well tubular metal structure (3) through the device opening (5) to an outside of the well tubular metal structure before being at least partly dissolved in brine, wherein the brine dissolvable element is at least partly made of a magnesium alloy.

No. of Pages : 13 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27390

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047026085 A (19) INDIA (22) Date of filing of Application :20/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : RADIO LINK STATUS DETERMINATION METHOD AND RADIO LINK STATUS DETERMINATION DEVICE

(51) International classification :H04W76/25,H04W76/19 (71)Name of Applicant : (31) Priority Document No :NA 1)BEIJING XIAOMI MOBILE SOFTWARE CO., LTD. (32) Priority Date :NA Address of Applicant :No.018, Floor 8, Building 6, Yard 33, (33) Name of priority country :NA Middle Xierqi Road, Haidian District Beijing 100085 China (86) International Application No :PCT/CN2017/113660 (72)Name of Inventor : Filing Date :29/11/2017 1)JIANG, Xiaowei

(87) International Publication No :WO 2019/104561 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided in the present disclosure is a radio link status determination method, comprising: determining whether there is a radio link failure on a supplemental uplink carrier of a cell in which the supplementary uplink carrier is configured, and/or determining whether there is a radio link failure on a non-supplemented uplink carrier; if there is a radio link failure on the supplementary uplink carrier, and/or there is a radio link failure on the non-supplemented uplink carrier, then it is determined that the cell has the radio link failure, and initiating a connection reestablishment procedure, and/or transmitting information on radio link failure to a base station. According to an embodiment of the present disclosure, it can be determined whether there is an radio link failure on the supplementary uplink carrier and whether there is a radio link failure on the non-supplemented uplink carrier, for the cell configured with the supplementary uplink carrier, so as to determine whether there is the radio link failure on the cell by integrating results of determination. Therefore, it is ensured that user equipment can accurately determine whether the cell has the radio link failure, so as to perform appropriate processing to ensure a good communication effect.

No. of Pages : 33 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27391

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047026086 A (19) INDIA (22) Date of filing of Application :20/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : NETWORK CONFIGURATION METHOD AND APPARATUS, AND NETWORK MEASUREMENT METHOD AND APPARATUS

(51) International classification :H04W 36/32 (71)Name of Applicant : (31) Priority Document No :NA 1)BEIJING XIAOMI MOBILE SOFTWARE CO., LTD. (32) Priority Date :NA Address of Applicant :Room01, Floor 9 Rainbow City (33) Name of priority country :NA Shopping Mall of China Resources NO.68, Qinghe Middle Street, (86) International Application No :PCT/CN2017/113487 Haidian District, Beijing 100085 China Filing Date :29/11/2017 (72)Name of Inventor : (87) International Publication No :WO 2019/104507 1)HONG, Wei

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure relates to a network configuration method and apparatus, and a network measurement method and apparatus. The network configuration method comprises: receiving a random access request sent by a user equipment; and sending radio resource control connection reconfiguration signaling to the user equipment, the radio resource control connection reconfiguration signaling carrying a preset first speed threshold value, the first speed threshold value being used for instructing the user equipment to perform cell measurement on adjacent cells of a common long term evolution (LTE) network when the speed is less than the first speed threshold value. The present disclosure can improve network configuration information of the user equipment and a cell measurement mode, thereby improving the success rate of cell handover.

No. of Pages : 31 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27392

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047026324 A (19) INDIA (22) Date of filing of Application :22/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMBINED LAMP AND ILLUMINATION SYSTEM

:F21S 8/00, F21V (71)Name of Applicant : (51) International classification 23/06, F21V 23/00 1)SUZHOU OPPLE LIGHTING CO., LTD. (31) Priority Document No :201711484926.2 Address of Applicant :Fenyang Road East, Fen Lake (32) Priority Date :29/12/2017 Developing Zone, Wujiang District Suzhou, Jiangsu 215211 (33) Name of priority country :China China (86) International Application No :PCT/CN2018/123932 2)OPPLE LIGHTING CO., LTD. Filing Date :26/12/2018 (72)Name of Inventor : (87) International Publication No :WO 2019/129073 1)ZHANG, Zhenghua (61) Patent of Addition to Application 2)WU, Jun :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A combined lamp and an illumination system, first conductive terminals (21) being provided on at least one sidewall (20) of each lamp unit (11, 12) in the combined lamp, a row of holes (31) corresponding to the first conductive terminals are provided on other sidewalls (20) of the lamp unit; a power supply bus, a light source device (42) and a processor (41) which are connected to the power supply bus, and a communication bus which is connected to the processor (41) are further provided inside each lamp unit (11, 12); each power supply bus is connected to the first conductive terminals (21) and second conductive terminals of the corresponding lamp units (11, 12); while any two lamps are connected by means of the first conductive terminals (21) and the second conductive terminals in the row of holes (31), mechanical connection, electrical connection and communication connection between two adjacent lamp units (11, 12) are realized, simplifying the manipulation of mechanical connection, electrical connection and communication connection between the lamp units (11, 12), eliminating complicated steps of routing multiple wires between the lamp units (11, 12).

No. of Pages : 27 No. of Claims : 19

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27393

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047026325 A (19) INDIA (22) Date of filing of Application :22/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A TRANSPORT SYSTEM OF CYLINDRICAL PRODUCTS TO BE LABELLED

:B65C 3/12, B65C (71)Name of Applicant : (51) International classification 9/04 1)MARCHESINI GROUP S.P.A. (31) Priority Document No :102017000142765 Address of Applicant :Via Nazionale 100 40065 Pianoro (BO) (32) Priority Date :12/12/2017 Italy (33) Name of priority country :Italy (72)Name of Inventor : (86) International Application No :PCT/IB2018/059292 1)MONTI, Giuseppe

Filing Date :26/11/2018 (87) International Publication No :WO 2019/116130 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The transport system (100) of cylindrical products (P) to be labelled comprises a first conveyor means (1) and a second conveyor organ (2). The first conveyor means (1) comprises pairs (11) of support members (12, 13) for supporting the cylindrical products (P), which are predisposed parallel to one another and mutually distanced so as to identify a free space (S) between them. The second conveyor means (2) is a looped conveyor means having an upper branch (RS) and is arranged with the free space (S) present between the pairs (11) of support members (12, 13) and comprises pairs (21) of idle rollers (22, 23) which, when moving along the upper branch (RS), are interposed with each pair (11) of the support members (12, 13). The upper branch (RS) has an ascending portion (A) so that the rollers (22, 23) of the pairs (21) can abut the products (P) transported by the pairs (11) of the support members (12, 13) and raise the products (P) from the housings (12, 13) so that the products (P) are supported only by the idle rollers (22, 23) when they transit at the abutting means (D2) of the device (D) for applying the labels.

No. of Pages : 10 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27394

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047026348 A (19) INDIA (22) Date of filing of Application :22/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : CUSTOMIZING TRANSMISSION OF A SYSTEM INFORMATION MESSAGE

:H04L 5/00, H04B (71)Name of Applicant : (51) International classification 7/06, H04W 4/08 1)GOOGLE LLC (31) Priority Document No :62/599,500 Address of Applicant :1600 Amphitheatre Parkway, Mountain (32) Priority Date :15/12/2017 View, California 94043 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2018/049407 1)WANG, Jibing Filing Date :04/09/2018 2)STAUFFER, Erik Richard

(87) International Publication No :WO 2019/118021 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Techniques and apparatuses are described that enable customized transmission of a system information message. One or more transmission characteristics of the system information message are tailored for a particular user equipment (UE) device or a group of UE devices. In one aspect, a response frequency used to transmit the system information message is customized based on a requested frequency of the UE device. In another aspect, a beamform pattern used to transmit the system information message is customized based on an angle to the UE device. In general, these customizations increase an amplitude of the system information message at the UE device, which increases an effective range of the system information message and enables a larger quantity of UE devices to establish communication with a base station. The customization also enables the base station to efficiently transmit the system information message to one or more UE devices.

No. of Pages : 25 No. of Claims : 18

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27395

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047026467 A (19) INDIA (22) Date of filing of Application :23/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : TRANSPORTABLE GRAVITATIONAL SYSTEM AND METHOD FOR GENERATING CLEAN ELECTRICAL ENERGY

(51) International classification :F03B 17/02 (71)Name of Applicant : (31) Priority Document No :NA 1)WINTERGERST FISCH, Luis (32) Priority Date :NA Address of Applicant :Perla, No. 2635, Colonia Residencial (33) Name of priority country :NA Victoria Guadalajara, Jalisco, 45089 Mexico (86) International Application No :PCT/MX2017/000167 (72)Name of Inventor : Filing Date :19/12/2017 1)WINTERGERST FISCH, Luis

(87) International Publication No :WO 2019/125110 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention relates to a transportable gravitational system and method for generating clean electrical energy, which is an electromechanical system that uses a trust-based drive system, a system for transmitting power by means of sprockets and pulleys, using toothed bands and chains connected to an electrical synchronous alternator. The described system uses as support systems a vacuum pump that generates a volume of low-pressure air, and speed-regulating motors, as well as electric control systems and electronic processors for the integral control of the generation system. The transportable gravitational system uses the thrust of the air in metal recipients that are immersed in a water column and hung by a drive chain that uses mechanical force, using torque- multiplying sprockets and a mechanical transmission system that increases the revolutions of the transportable gravitational system to achieve sufficient drive speed, which excites the arrow of the synchronous alternator.

No. of Pages : 17 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27396

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047026500 A (19) INDIA (22) Date of filing of Application :23/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : RESYNCHRONIZATION SIGNAL DESIGN

:H04W 52/02, H04W (71)Name of Applicant : (51) International classification 56/00 1)QUALCOMM INCORPORATED (31) Priority Document No :62/621,751 Address of Applicant :Attn: International IP Administration, (32) Priority Date :25/01/2018 5775 Morehouse Drive, San Diego, California 92121-1714 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2018/067830 1)SENGUPTA, Ayan Filing Date :28/12/2018 2)RICO ALVARINO, Alberto (87) International Publication No :WO 2019/147381 3)LIU, Le

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Methods, systems, and devices for wireless communications are described. A user equipment (UE) may receive a first synchronization signal for synchronizing with a cell, the first synchronization signal transmitted at a first periodicity by a base station serving the cell. The UE may then receive, subsequent to the synchronizing, a second synchronization signal for resynchronizing with the cell. In some cases, the second synchronization signal may be transmitted by the base station according to a second periodicity that is different from the first periodicity. In some cases, the second synchronization signal may include a plurality of repetitions of a first sequence that is based at least in part on a cell identifier of the cell. The UE may communicate over the cell with the base station based at least in part on the resynchronizing.

No. of Pages : 93 No. of Claims : 104

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27397

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047026502 A (19) INDIA (22) Date of filing of Application :23/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEMS AND METHODS FOR LOCATING A USER EQUIPMENT USING GENERIC POSITION METHODS FOR A 5G NETWORK

:H04W 64/00, H04W (71)Name of Applicant : (51) International classification 88/06 1)QUALCOMM INCORPORATED (31) Priority Document No :62/619,909 Address of Applicant :Attn: International IP Administration, (32) Priority Date :21/01/2018 5775 Morehouse Drive, San Diego, California 92121-1714 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2018/066275 1)EDGE, Stephen William Filing Date :18/12/2018 2)LOPES, Luis Fernando Brisson (87) International Publication No :WO 2019/143437 3)FISCHER, Sven

(61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Techniques are disclosed in which generic position methods in a wireless network allow positioning of a target user equipment (UE) that is served by any one (or more) of a number of different Radio Access Technologies (RATs) and that allow measurements by the UE of access nodes belonging to different RATs and/or measurements of the UE by access nodes for different RATs. With a generic position method, a common set of procedures, messages, and parameters may be defined that are applicable to multiple RATs and that do not require a location server to know in advance the serving RAT for a target UE.

No. of Pages : 61 No. of Claims : 45

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27398

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047026519 A (19) INDIA (22) Date of filing of Application :23/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COLLECTOR OF WASTED CLEAN WATER AND ITS METHOD

:E03B 1/04, E03C (71)Name of Applicant : (51) International classification 1/22 1)WATER SAVING TECHNOLOGIES COMPANY (31) Priority Document No :NA LIMITED (32) Priority Date :NA Address of Applicant :12 Konstantinou Saratsi Str. 55 132 (33) Name of priority country :NA Kalamaria Thessalonikis Greece (86) International Application No :PCT/GR2017/000065 (72)Name of Inventor : Filing Date :24/11/2017 1)NAOUM, Dimitrios

(87) International Publication No :WO 2019/102235 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The invention relates to a device which is capable of collecting clean water running freely from a tap and not allowing grey water to be introduced into the device when using the water running from the tap and a method performed from the device. The device consists of a base (1), a water separator (5), a safety tank base (10), a security tank shell (3), a pipe (16), a water flow switch (17), a pipe (19). The operation of the device is achieved by exploiting the concentrated kinetic energy of the water column at the inlet of the device. Through a hydraulic circuit and with fluid balances, clear water is allowed to pass and gray waste water is prevented. The invention finds application in domestic use, hotels, business premises, etc.

No. of Pages : 23 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27399

(12) PATENT APPLICATION PUBLICATION (21) Application No.202047027696 A (19) INDIA (22) Date of filing of Application :30/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMPOSITION AND METHOD FOR TREATING PERIPHERAL T-CELL LYMPHOMA AND CUTANEOUS T-CELL LYMPHOMA

:A61P 35/00, A61K (71)Name of Applicant : (51) International classification 31/353, A61K 31/52 1)RHIZEN PHARMACEUTICALS SA (31) Priority Document No :201741043740 Address of Applicant :Fritz Courvoisier 40 2300 La Chaux De (32) Priority Date :06/12/2017 Fonds Switzerland (33) Name of priority country :India (72)Name of Inventor : (86) International Application No :PCT/IB2018/059680 1)VAKKALANKA, Swaroop Kumar Venkata Satya

Filing Date :05/12/2018 (87) International Publication No :WO 2019/111185 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to the use of a dual selective PI3K delta and gamma protein kinase inhibitor, such as (S)-2-(1-((9H- purin-6-yl)amino)propyl)-3-(3-fluorophenyl)-4H-chromen-4-one (Compound (A), also known as tenalisib) or a pharmaceutically acceptable salt thereof or a pharmaceutical composition containing such an inhibitor for the treatment of peripheral T-cell lymphoma (PTCL) and cutaneous T-cell lymphoma (CTCL). 34 139095.00100/115268675v.1

No. of Pages : 24 No. of Claims : 44

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27400

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048015905 A (19) INDIA (22) Date of filing of Application :13/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : MOBILE COMMUNICATION SYSTEM, BASE STATION AND USER EQUIPMENT

:H04W 28/16, H04J (71)Name of Applicant : 1/00, H04J 11/00, 1)MITSUBISHI ELECTRIC CORPORATION (51) International classification H04W 24/10, H04W Address of Applicant :7-3, Marunouchi 2-chome, Chiyoda-ku, 36/08 Tokyo 100-8310, Japan (31) Priority Document No :2012-015282 (72)Name of Inventor : (32) Priority Date :27/01/2012 1)MOCHIZUKI, Mitsuru (33) Name of priority country :Japan 2)MAEDA, Miho (86) International Application No :PCT/JP2013/051454 3)UGA, Shinsuke Filing Date :24/01/2013 4)FUKUI, Noriyuki

(87) International Publication No :2013111818.A1 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :5778/CHENP/2014 Filed on :25/07/2014

(57) Abstract : ABSTRACT MOBILE COMMUNICATION SYSTEM, BASE STATION AND USER EQUIPMENT In this mobile communication system a Radio Resource Management (RRM) measurement set (1401) is configured as a set of cells to be subject to processing to detect whether user equipment (UE) therein is able to perform radio communication. Of cells in a RRM measurement set (1401) a coordinated multiple point transmission and reception (CoMP) measurement set (1402) is configured as a candidate set of cells for processing to detect whether the UE therein is able to perform cooperative communication (CoMP communication). Of cells in the CoMP measurement set (1402) a CoMP active set (1601) is configured as a set of cells to be subject to processing to detect whether UE therein is able to perform CoMP communication.

No. of Pages : 260 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27401

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048019638 A (19) INDIA (22) Date of filing of Application :08/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DOWNLINK RESOURCE SCHEDULING

:H04J 11/00, H04B (71)Name of Applicant : (51) International classification 7/26 1)APPLE INC. (31) Priority Document No :61/556,109 Address of Applicant :One Apple Park Way, Cupertino, (32) Priority Date :04/11/2011 California 95014, United States of America U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2012/031036 1)HE, Hong Filing Date :28/03/2012 2)FWU, Jong-Kae

(87) International Publication No :W02013/066385 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :3078/CHENP/2014 Filed on :24/04/2014

(57) Abstract : ABSTRACT DOWNLINK RESOURCE SCHEDULING An apparatus (108) receives downlink control information (DCI) (508, 512) in a first subframe of a primary serving cell (Pcell) of a base station. The DCI includes a carrier indication field (CIF) value and an indicator to indicate a downlink resource of a physical downlink shared channel (PDSCH) transmission that is to include data directed to the apparatus. The apparatus determines (608) that the PDSCH transmission is in a second subframe of a secondary serving cell (Scell), based on a predetermined subframe pairing and the CIF value. The apparatus determines that the indicator applies to a first paired subframe of the predetermined subframe pairing, a second paired subframe of the predetermined subframe pairing, or to both the first and second paired subframe of the predetermined subframe pairing. The apparatus decodes the downlink resource based on the indicator and said determination. Preferred Figure to accompany the Abstract when published (see Rule 13(7) (d)): FIG.l

No. of Pages : 28 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27402

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048020150 A (19) INDIA (22) Date of filing of Application :13/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DATA GENERATION DEVICE

:H04N 21/2343, (71)Name of Applicant : H04N 19/70, H04N 1)Panasonic Intellectual Property Management Co., Ltd. (51) International classification 21/236, H04N Address of Applicant :1-61, Shiromi 2-chome, Chuo-ku, 21/4402 Osaka-shi, Osaka 540-6207 Japan (31) Priority Document No :62/087,035 (72)Name of Inventor : (32) Priority Date :03/12/2014 1)DRUGEON, Virginie (33) Name of priority country :U.S.A. 2)NISHI, Takahiro (86) International Application No :PCT/JP2015/005894 3)TOMA, Tadamasa

Filing Date :27/11/2015 (87) International Publication No :WO/2016/088344 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :201747019122 Filed on :27/11/2015

(57) Abstract : A data generation device (110) includes: a generating circuit configured to generate video data according to an Advanced Video Coding (AVC) standard and a second opto-electrical transfer function (OETF); and a storage to store: video usability information (VUI) including a first value indicating a first OETF; and supplemental enhancement information (SEI) including a second value indicating the second OETF. The first value and the second value each are selected from candidates defined in the AVC standard. The candidates include a first candidate which is provided for the first value and which is equal to 1 or 14. The candidates include a second candidate which is provided for the second value and which is equal to 18. The first value is to be referred to by a decoding device that does not support the second OETF. The second OETF is a combination of a square root function and a logarithmic function. Fig. 1

No. of Pages : 46 No. of Claims : 3

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27403

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048021857 A (19) INDIA (22) Date of filing of Application :25/05/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DIAGNOSTIC FOR COLORECTAL CANCER

:G01N 33/574, C12Q (71)Name of Applicant : (51) International classification 1/68 1)Vision Tech Bio Pty Ltd (31) Priority Document No :2010903140 Address of Applicant :Level 17, 500 Collins Street, (32) Priority Date :14/07/2010 Melbourne, Victoria 3000, Australia Australia (33) Name of priority country :Australia (72)Name of Inventor : (86) International Application No :PCT/AU2011/000895 1)COSGRAVE, Leah, Jane Filing Date :14/07/2011 2)BURGESS, Antony Wilks (87) International Publication No : NA 3)TABOR, Bruce (61) Patent of Addition to Application 4)NICE, Edouard, Collins :NA Number :NA Filing Date (62) Divisional to Application Number :1129/CHENP/2013 Filed on :12/02/2013

(57) Abstract : The present invention provides a method for diagnosing or detecting colorectal cancer in a subject, the method comprising determining the presence and/or level of expression of at least three biomarkers from M2PK, IGFBP2, and DKK-3, or M2PK, IGFBP2 and IL-8. The invention also relates to diagnostic kits comprising reagents for determining the presence and/or level of the biomarkers and methods of detecting or diagnosing colorectal cancer.

No. of Pages : 76 No. of Claims : 31

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27404

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048022892 A (19) INDIA (22) Date of filing of Application :01/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : INTRACELLULAR DELIVERY

:C12M 3/00, C12M (71)Name of Applicant : (51) International classification 3/02, C12N 15/89 1)MASSACHUSETTS INSTITUTE OF TECHNOLOGY (31) Priority Document No :61/548,013 Address of Applicant :77 MASSACHUSETTS AVENUE, (32) Priority Date :17/10/2011 CAMBRIDGE, MA 02139 UNITED STATES OF AMERICA (33) Name of priority country :U.S.A. U.S.A. (86) International Application No :PCT/US2012/060646 (72)Name of Inventor : Filing Date :17/10/2012 1)SHAREI, Armon (87) International Publication No :WO/2013/059343 2)ADAMO, Andrea (61) Patent of Addition to Application 3)LANGER, Robert :NA Number 4)JENSEN, Klavs, F. :NA Filing Date (62) Divisional to Application Number :3270/CHENP/2014 Filed on :30/04/2014

(57) Abstract : A microfluidic system for causing perturbations in a cell membrane, the system including a microfluidic channel defining a lumen and being configured such that a cell suspended in a buffer can pass therethrough, wherein the microfluidic channel includes a cell- deforming constriction, wherein a diameter of the constriction is a function of the diameter of the cell.

No. of Pages : 120 No. of Claims : 19

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27405

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048024250 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : DEVICE AND METHOD OF IMPROVING THE PERCEPTUAL LUMINANCE NONLINEARITY - BASED IMAGE DATA EXCHANGE ACROSS DIFFERENT DISPLAY CAPABILITIES

:G06F 3/14, G09G (71)Name of Applicant : (51) International classification 5/00, G06T 5/00 1)DOLBY LABORATORIES LICENSING (31) Priority Document No :61/567,579 CORPORATION (32) Priority Date :06/12/2011 Address of Applicant :100 Potrero Avenue San Francisco, (33) Name of priority country :U.S.A. California 94103-4813, United States of America U.S.A. (86) International Application No :PCT/US2012/068212 (72)Name of Inventor : Filing Date :06/12/2012 1)MILLER, Jon, Scott (87) International Publication No :WO/2013/086169 2)DALY, Scott (61) Patent of Addition to Application 3)NEZAMABADI, Mahdi :NA Number 4)ATKINS, Robin :NA Filing Date (62) Divisional to Application Number :3871/CHENP/2014 Filed on :22/05/2014

(57) Abstract : A handheld imaging device has a data receiver that is configured to receive reference encoded image data. The data includes reference code values, which are encoded by an external coding system. The reference code values represent 10 reference gray levels, which are being selected using a reference grayscale display function that is based on perceptual non-linearity of human vision adapted at different light levels to spatial frequencies. The imaging device also has a data converter that is configured to access a code mapping between the reference code values and device-specific code values of the imaging device. The device-specific 15 code values are configured to produce gray levels that are specific to the imaging device. Based on the code mapping, the data converter is configured to transcode the reference encoded image data into device-specific image data, which is encoded with the device-specific code values.

No. of Pages : 94 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27406

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048024253 A (19) INDIA (22) Date of filing of Application :09/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : ELECTRICITY MANAGEMENT USING MODULATED WAVEFORMS

:H02J 3/02, H02J (71)Name of Applicant : (51) International classification 3/32 1)MICROSOFT TECHNOLOGY LICENSING, LLC (31) Priority Document No :62/023,782 Address of Applicant :One Microsoft Way Redmond, (32) Priority Date :11/07/2014 Washington 98052-6399, United States of America U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2015/039464 1)LIU, Jie Filing Date :08/07/2015 2)JANOUS, Brian (87) International Publication No :WO/2016/007569 3)MCKNIGHT, Gregory Joseph (61) Patent of Addition to Application 4)JAMES, Sean :NA Number 5)BIANCHINI, Ricardo :NA Filing Date (62) Divisional to Application Number :201747000702 Filed on :06/01/2017

(57) Abstract : This document relates to electricity management using modulated waveforms. One example modulates electricity to obtain modulated electricity having at least 5 two different alternating current frequencies including a first alternating current frequency and a second alternating current frequency. The example delivers the modulated electrical power having the at least two different alternating current frequencies to multiple different electrical devices, including a first electrical device configured to utilize the first alternating current frequency and a second 10 electrical device configured to utilize the second alternating current frequency. The modulated electricity can be delivered at least partly over an electrical line shared by the first electrical device and the second electrical device.

No. of Pages : 54 No. of Claims : 20

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27407

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048024319 A (19) INDIA (22) Date of filing of Application :10/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : A METHOD AND APPARATUS FOR AGGREGATING DATA BETWEEN A GROUP OF APPLICATIONS

:G06Q 40/04, G06Q (71)Name of Applicant : (51) International classification 40/06 1)TRADING TECHNOLOGIES INTERNATIONAL, INC. (31) Priority Document No :13/839,369 Address of Applicant :222 South Riverside Plaza, Suite 1100, (32) Priority Date :15/03/2013 Chicago, Illinois 60606, U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2013/035654 1)LANE, Richard Filing Date :08/04/2013 2)WEISS, Thomas, Jeffrey (87) International Publication No :WO2014/143079 3)WOO, Thurston (61) Patent of Addition to Application 4)SHAFFER, Jason :NA Number 5)BUCK, Brian, J. :NA Filing Date 6)UNETICH, Michael (62) Divisional to Application Number :5458/CHENP/2015 7)MINTZ, Sagy, Pundak

Filed on :08/04/2013

(57) Abstract : A method and apparatus for aggregating data between a group of applications is provided. The method includes receiving by a circle manager (300) first data from a first device for a request of the first device, wherein the circle manager facilitates communication for a circle, wherein the first device is a member of the circle, receiving by the circle manager second data from a second device for a request of the second device, wherein the second device is a member of the circle and providing by the circle manager aggregated data to the circle, wherein the aggregated data is based on the first data and the second data. Figure 3

No. of Pages : 58 No. of Claims : 24

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27408

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048024481 A (19) INDIA (22) Date of filing of Application :11/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : SYSTEM AND METHOD FOR PROSTATE VISUALIZATION AND CANCER DETECTION•

(51) International classification :G06K 9/00 (71)Name of Applicant : (31) Priority Document No :61/297,454 1)THE RESEARCH FOUNDATION OF THE STATE (32) Priority Date :22/01/2010 UNIVERSITY OF NEW YORK (33) Name of priority country :U.S.A. Address of Applicant :Suny at Stony Brook Stony Brook NY (86) International Application No :PCT/US2011/022285 11794-3369 U.S.A. Filing Date :24/01/2011 (72)Name of Inventor : (87) International Publication No :WO/2011/091378 1)KAUFMAN, Arie (61) Patent of Addition to Application 2)MARINO, Joseph :NA Number :NA Filing Date (62) Divisional to Application Number :6956/CHENP/2012 Filed on :08/08/2012

(57) Abstract : ABSTRACT "SYSTEM AND METHOD FOR PROSTATE VISUALIZATION AND CANCER DETECTION" A method, system, and computer-readable medium for detecting a disease of a prostate. Exemplary embodiments of the present disclosure can include receiving an image dataset acquired with at least one acquisition mode; segmenting a region of interest including the prostate from the dataset; applying conformal mapping to map the region of interest to a canonical shape; generating a 3D visualization of the prostate using the canonically mapped dataset; and applying computer aided detection (CAD) to the canonically mapped volume to detect a region of disease of the organ. [FIG: 2]

No. of Pages : 74 No. of Claims : 33

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27409

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048024756 A (19) INDIA (22) Date of filing of Application :12/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : MOBILE COMMUNICATION SYSTEM, SOURCE BASE STATION, TARGET BASE STATION AND USER EQUIPMENT

(51) International classification :H04W 72/04 (71)Name of Applicant : (31) Priority Document No :2012-171871 1)MITSUBISHI ELECTRIC CORPORATION (32) Priority Date :02/08/2012 Address of Applicant :7-3, Marunouchi 2-chome, Chiyoda-ku, (33) Name of priority country :Japan Tokyo 100-8310, Japan Japan (86) International Application No :PCT/JP2013/070983 (72)Name of Inventor : Filing Date :02/08/2013 1)MOCHIZUKI, Mitsuru (87) International Publication No :WO.2014021447.A1 2)MAEDA, Miho (61) Patent of Addition to Application 3)UGA, Shinsuke :NA Number :NA Filing Date (62) Divisional to Application Number :613/CHENP/2015 Filed on :02/08/2013

(57) Abstract : "MOBILE COMMUNICATION SYSTEM, SOURCE BASE STATION, TARGET BASE STATION AND USER EQUIPMENT" Provided is a communication system that can be normally and efficiently operated in the case where existing carriers and new carrier types coexist. A base station device and a communication terminal device are configured to perform communication in cells of legacy carriers LC I to LC3 being existing carriers. When the base station device starts operating new carrier types NCT! and NCT2, the NCTI and NCT2 are associated with legacy carriers belonging to the same frequency band. For example, the NCT2 is , associated with the LC2 or the LC3 and is not associated with the LC!. The legacy carriers LC! to LC3 associated with the NCTl and the NCT2 notify the communication terminal device of the infration on the NCT! and NCT2. This allows the communication terminal device to communicate with the NCTI and the NCT2.

No. of Pages : 160 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27410

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048024916 A (19) INDIA (22) Date of filing of Application :13/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND APPARATUS FOR IMPROVING SERVICE EFFICIENCY IN WIRELESS COMMUNICATION SYSTEM

:H04W 8/02, H04W (71)Name of Applicant : (51) International classification 36/34 1)SAMSUNG ELECTRONICS CO., LTD. (31) Priority Document No :10-2013-0090381 Address of Applicant :129, Samsung-ro, Yeongtong-gu, (32) Priority Date :30/07/2013 Suwonsi, Gyeonggi-do 443-742, Republic of Korea Republic of (33) Name of priority country :Republic of Korea Korea (86) International Application No :PCT/KR2014/007001 (72)Name of Inventor : Filing Date :30/07/2014 1)KIM, Hyejeong (87) International Publication No :WO/2015/016610 2)JEONG, Sangsoo (61) Patent of Addition to Application 3)CHO, Songyean :NA Number :NA Filing Date (62) Divisional to Application Number :4399/CHENP/2015 Filed on :21/07/2015

(57) Abstract : ABSTRACT "METHOD AND APPARATUS FOR IMPROVING SERVICE EFFICIENCY IN WIRELESS COMMUNICATION SYSTEM" Disclosed are a method and an apparatus for selecting a domain for a voice call in a mobile communication network. A terminal, which uses VoLTE, receives, from a network, identification information indicating whether IMS Voice over PS (IMS VoPS) is supported, determines whether the network supports IMS VoPS and determines a domain (PS or CS) to which a voice service will be provided through the network according to the determination result. [Figure 5]

No. of Pages : 53 No. of Claims : 6

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27411

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048025647 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROGRAMMABLE LIGHTING DRIVER

(51) International classification :H05B 37/02 (71)Name of Applicant : (31) Priority Document No :61/867,326 1)SIGNIFY HOLDING B.V. (32) Priority Date :19/08/2013 Address of Applicant :High Tech Campus 48, NL-5656, AE (33) Name of priority country :India Eindhoven, The Netherlands. Netherlands (86) International Application No :PCT/IB2014/063964 (72)Name of Inventor : Filing Date :19/08/2014 1)LAI, Bing (87) International Publication No :WO/2015/025267 2)CLAUBERG, Bernd (61) Patent of Addition to Application 3)HARISH GOPALA PILLAI, Raman Nair :NA Number 4)MARBLE, Alan James :NA Filing Date (62) Divisional to Application Number :201647009319 Filed on :17/03/2016

(57) Abstract : A programmable lighting driver (120) includes a power stage (128), a controller (225), a nonvolatile memory and a near field communication device (124). The power stage is configured to receive power from an external supply and supplying power to at least one light source. The controller is configured to control operation of the power stage according to an operating parameter and/or configuration setting for the programmable lighting device. The nonvolatile memory device stores the operating parameter and/or configuration setting. The near field communication device receives a radio frequency signal which communicates the operating parameter and/or configuration setting, and in response thereto stores the operating parameter and/or configuration setting in the nonvolatile memory. The near field communication device generates a supply voltage for powering the nonvolatile memory device from the RF signal. The driver is capable of supporting multiple dimming interfaces, the RF signal communicates the one configuration setting for the programmable lighting driver, wherein the one configuration setting identifies an active dimming interface for the programmable lighting driver, among the multiple dimming interfaces available for and supported by the programmable lighting driver. Figure 1

No. of Pages : 39 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27412

(12) PATENT APPLICATION PUBLICATION (21) Application No.202048025765 A (19) INDIA (22) Date of filing of Application :18/06/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND DEVICE FOR FORMING GROOVES IN PIPE ELEMENTS

:G01B 5/08, G01B (71)Name of Applicant : (51) International classification 7/12, G01B 11/08 1)VICTAULIC COMPANY (31) Priority Document No :13/964,671 Address of Applicant :4901 Kesslersville Road, Easton, (32) Priority Date :12/08/2013 Pennsylvania 18040 U.S.A. (33) Name of priority country :U.S.A. (72)Name of Inventor : (86) International Application No :PCT/US2014/047159 1)PUZIO, Matthew, J. Filing Date :18/07/2014 2)VICARIO, Daniel, B. (87) International Publication No :WO/2015/023391 3)DOLE, Douglas, R. (61) Patent of Addition to Application 4)PRICE, Anthony :NA Number :NA Filing Date (62) Divisional to Application Number :201647004684 Filed on :18/07/2014

(57) Abstract : A method of forming circumferential grooves in pipe elements using opposed rollers to cold work the pipe elements determines the diameter of the groove while the pipe element is rotated between the rollers. A device for executing the method uses the instantaneous determinations of the groove diameter in a feed-back loop to control the operation of the device and halt groove formation when the groove diameter is within a specified tolerance.

No. of Pages : 59 No. of Claims : 18

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27413

(12) PATENT APPLICATION PUBLICATION (21) Application No.201837046176 A (19) INDIA (22) Date of filing of Application :06/12/2018 (43) Publication Date : 17/07/2020

(54) Title of the invention : NETWORK DEVICE TERMINAL DEVICE AND ASSOCIATED METHODS

(51) International classification :H04L 29/08 (71)Name of Applicant : (31) Priority Document No :PCT/CN2017/097199 1)TELEFONAKTIEBOLAGET LM ERICSSON (publ) (32) Priority Date :11/08/2017 Address of Applicant :SE-164 83 Stockholm (33) Name of priority country :China 2)LIU, Jinhua (86) International Application No :PCT/CN2018/090448 (72)Name of Inventor : Filing Date :08/06/2018 1)LIU, Jinhua (87) International Publication No :WO 2019/029251 2)CHRISTOFFERSSON, Jan (61) Patent of Addition to Application 3)FOLKE, Mats :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure provides a method (500) in a network device. The method (500) comprises: receiving (510) a random access request message from a terminal device; and transmitting (520) to the terminal device a Random Access Response (RAR) message in response to the random access request message. The RAR message has a format dependent on a type of the random access request message.

No. of Pages : 27 No. of Claims : 22

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27414

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931000965 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A MAGNETICALLY SEPARABLE AND RECYCLABLE G-C3N4/FE3O4/POROUS RUNP NANOCATALYST FOR THE PHOTOCATALYTIC DECOMPOSITION OF WATER SOLUBLE AROMATIC AMINES

:B01J0035000000, (71)Name of Applicant : B01J0037030000, 1)INDIAN INSTITUTE OF TECHNOLOGY (51) International classification B01J0031060000, BHUBANESWAR C02F0001300000, Address of Applicant :Indian Institute of Technology B01J0021080000 Bhubaneswar Samantapuri Bhubaneswar Orissa India 751013 (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)PATRA, Dr. Srikanta (33) Name of priority country :NA 2)SAHOO, Mr. Anupam

(57) Abstract : A magnetically separable and recyclable g-C3N4/Fe3O4/porous RuNP nanocatalyst for the photocatalytic decomposition of water soluble aromatic amines. A unique g-C3N4/Fe3O4/p-RuNP nanocomposite system is provided with potential applicability towards photocatalytic decomposition of water soluble aromatic amines and azo-dyes from water body, with a surprising recyclability of the said catalyst comprising advantage of magnetic separation. The photocatalytic degradation developed herein involve neither any chemical reagent, nor harmful UV radiation for degradation of the pollutant amines and azo dyes, rather confers a cheap catalytic technique functioning at pH7, in using visible radiation, i.e, sunlight and produces less toxic/gaseous degradation product with small amount of solid sludge and hence reduces the chemical oxygen demand (COD). The magnetically separable recyclable nanocomposite based photocatalyst has a profound application in the field of effluent-treatment in the industries like resin, textile, plastic manufacturing, photographic, etc. and also for the end products of pesticide degradation, bacterial/chemical conversion of azo compounds, etc. which produce highly toxic, carcinogenic or mutagenic aromatic amines.

No. of Pages : 48 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27415

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931000998 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : HERBICIDAL COMBINATION

:A01N0043800000, (71)Name of Applicant : A01N0043680000, 1)UPL LTD (51) International classification C09K0008880000, Address of Applicant :Agrochemical Plant Durgachak Haldia A01N0037440000, Midnapore West Bengal India 721 602 G01N0021630000 (72)Name of Inventor : (31) Priority Document No :NA 1)LIMA SILVA FERDINANDO MARCOS (32) Priority Date :NA 2)MEGDA FLAVIA FERREIRA

(57) Abstract : A herbicidal combination comprising: at least one organophosphorus herbicide; clomazone; and at least one chlorophyll and heme biosynthesis inhibitor for controlling pre-emergent and post-emergent weeds.

No. of Pages : 46 No. of Claims : 25

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27416

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001030 A (19) INDIA (22) Date of filing of Application :09/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : A COATING COMPOSITION FOR THE ELECTRODE COATING OF RUTILE COATED STICK

:B23K0035365000, (71)Name of Applicant : C04B0028260000, 1)BHARAT HEAVY ELECTRICALS LIMITED (51) International classification B01J0021120000, Address of Applicant :With one its Regional Offices at B23K0035360000, REGIONAL OPERATIONS DIVISION (ROD), PLOT NO: 9/1, C21D0009460000 DJ BLOCK 3rd FLOOR, KARUNAMOYEE, SALTLAKE, (31) Priority Document No :NA KOLKATA- 700091, having its Registered Office at BHEL (32) Priority Date :NA HOUSE, SIRI FORT, NEW DELHI 110049, INDIA (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)VISHAL SINGH Filing Date :NA 2)ARUNACHALAM SANTHAKUMARI

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A novel coating composition of rutile coated stick welding electrode comprises the components such as cellulose, limestone, titanium dioxide rutile, feldspar, mica, clay, ferromanganese, sodium silicate, potassium silicate, boron and titanium. Characterized in that the composition provides high charpy-V notch toughness values.

No. of Pages : 11 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27417

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001184 A (19) INDIA (22) Date of filing of Application :10/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD OF MAKING BLUE EMITTING GRAPHENE QUANTUM DOTS FROM COAL

:B82Y0040000000, (71)Name of Applicant : A61M0001160000, 1)TATA STEEL LIMITED (51) International classification B82Y0030000000, Address of Applicant :BISTUPUR, JAMSHEDPUR, C01B0032182000, JHARKHAND-831001, INDIA. C01B0032184000 2)UNIVERSITY OF CALCUTTA (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)SOUMITRA GHORAI (33) Name of priority country :NA 2)PRATIK SWARUP DASH (86) International Application No :NA 3)INDRANIL ROY Filing Date :NA 4)DIPANKAR CHATTOPADHYAY

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Described herein relates to a method of making blue emitting graphene quantum dots (GQDs) from coal. The method includes chemically oxidizing the coal in an acidic environment followed by distillation of acid; hydrothermal cutting of the oxidized coal at 200° C for 8 hours to obtain a GQD solution; purifying the GQD solution through a 0.45 mm polytetrafluoroethylene membrane; and dialyzing a filtrate of the GQD solution in 1000 Da dialysis bag for 5 days.

No. of Pages : 26 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27418

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001315 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : WELDING A SPOOL PIECE OF GRADE TX 63 ON A RADIANT TUBE

:C21D0009080000, (71)Name of Applicant : C21D0008100000, 1)BHARAT HEAVY ELECTRICALS LIMITED (51) International classification G01F0001660000, Address of Applicant :Regional office: Regional Operations A61J0003070000, Division (ROD), Plot No. : 9/1, DJ Block 3rd Floor, B24C0003320000 Karunamoyee, Salt Lake, Kolkata, West Bengal-700091, India. (31) Priority Document No :NA Registered Office: BHEL House, Siri Fort, New Delhi-110049, (32) Priority Date :NA India. (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)ABHISHEK KUMAR SINGH Filing Date :NA 2)KALIASUNDARAM DURAI PANDIAN (87) International Publication No : NA 3)NANDAN KUMAR

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : In the manufacturing of seamless steel tubes in the cold drawing process, the tubes are subjected to internal stresses which are to be relieved in the heat treatment furnace where radiant tube assembly is used for heat transfer purpose and these assemblies of thirty numbers are placed in series in the furnace and often the tubes are punctured and the punctured portion to be cut and welded with a spool piece and the material grade is TX63 for which the new process is developed for welding with specified electrode which is selected based on the experiments having 60% Nickel to suit the material composition and conventional welding machine is used to complete the welding, so by this method the fabrication of new assembly is avoided to increase the availability of the furnace for continuous production and hence the productivity is increased.

No. of Pages : 13 No. of Claims : 2

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27419

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001339 A (19) INDIA (22) Date of filing of Application :11/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : ORGANIC BALL BED WATER CLEANING STSTEM

:A01K0063040000, (71)Name of Applicant : C02F0001000000, 1)Priyaranjan Das (51) International classification C02F0003060000, Address of Applicant :L-88, K-6-A, Kalinga Vihar B01F0003040000, Bhubaneswar, Odisha-19 India C02F0001720000 (72)Name of Inventor : (31) Priority Document No :NA 1)Priyaranjan Das (32) Priority Date :NA 2)Madhuchhanda Das

(33) Name of priority country :NA (86) International Application No :PCT// Filing Date :01/01/1900 (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : A process of purification of water that comprises a water pond (A), organic bed (B), and pumping system (C), Solar PV module set up (D), the process HDPE liners (E) and the outlet pipe (F), the process comprising the steps of water is first pumped to a filtration media which flows through a Bell siphon to a rearing tank or to the main pond; nitrifying bacteria present in the filtration media cleanse the water naturally; clean water that flows to the pond from Bell siphon is returned to the tank or pond by elevated duly holed pipes; clean water droplets fall to the main water surface with the air bubbles that aerate the entire water body naturally.

No. of Pages : 11 No. of Claims : 2

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27420

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001618 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : CRACK CONTROL IN DISSIMILAR WELDING

:B29C0045270000, (71)Name of Applicant : F01N0003280000, 1)INDIAN INSTITUTE OF TECHNOLOGY (51) International classification C23C0004020000, KHARAGPUR G02B0006440000, Address of Applicant :Indian Institute of Technology, G11B0033140000 Kharagpur Dist - Midnapore West Bengal India 721302 (31) Priority Document No :NA (72)Name of Inventor : (32) Priority Date :NA 1)CHATTOPADHYAY, Angshuman (33) Name of priority country :NA 2)MUVVALA, Gopinath (86) International Application No :NA 3)RACHERLA, Vikranth Filing Date :NA 4)NATH, Ashish, Kumar

(87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to address the problem of transverse cracks is based on the thermal expansion coefficient of titanium and stainless steel. Considering that the thermal expansion coefficient of SS 304 (17.3x10-6/K) is considerably higher than that of Ti (8.6x10-6/K), longitudinal stresses are generated along the direction of welding during solidification and cooling. This is responsible for formation of transverse cracks. Hence in the present invention solution being provided, the stainless steel strip is allowed to cool faster while at the same time cooling of titanium strip is restricted so that the solidification of Ti side melt pool is slowed down for it to withstand the differential thermal strains in these two materials.

No. of Pages : 18 No. of Claims : 22

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27421

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001645 A (19) INDIA (22) Date of filing of Application :14/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : LIPOPEPTIDES HAVING CONSTRAINED LIPIDIC MOIETIES FOR TRANSFECTION AND SIRNA DELIVERY TO CANCER CELLS

:A61K0047540000, (71)Name of Applicant : C12N0015870000, 1)INDIAN INSTITUTE OF SCIENCE EDUCATION AND (51) International classification C12N0015880000, RESEARCH KOLKATA C07K0007060000, Address of Applicant :An Autonomous Institution, Ministry of C07K0014000000 Human Resource Development, Govt. of India of MOHANPUR, (31) Priority Document No :NA NADIA - 741 246, WEST BENGAL, INDIA (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)ROY, RITUPARNA SINHA (86) International Application No :NA 2)BHATTACHARYYA, DHANANJAY Filing Date :NA 3)MALLICK, ARGHA MARIO (87) International Publication No : NA 4)BISWAS, ABHIJIT (61) Patent of Addition to Application 5)CHAKRABORTY, KASTUREE :NA Number 6)MUKHERJEE, SANCHITA :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure provides lipopeptides having constrained lipidic moieties, wherein said lipopeptides are capable of acting as transfection agents. More particularly, the lipopeptides of the present disclosure are arginine enriched facial lipopeptides having constrained lipidic moieties, specifically designed such that consecutive arginine residues are separated by spacer amino acids such as but not limited to sarcosine and glycine. The present disclosure further provides a method of preparing said lipopeptides and applications of said lipopeptides. Application of the lipopeptides include but are not limited to transfection and cargo delivery into a cell, wherein examples of cargo include but are not limited to nucleic acids such as siRNA. The lipopeptides provide advantages such as but not limited to high stability while ensuring ease of disassembly after internalization and low cost of production.

No. of Pages : 59 No. of Claims : 18

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27422

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001718 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PROCESS FOR FULL PENETRATION BUTT WELDING OF SHEET METAL PLATES

:B23K0009173000, (71)Name of Applicant : B23K0009035000, 1)BHARAT HEAVY ELECTRICALS LIMITED (51) International classification B23K0033000000, Address of Applicant :Regional office: Regional Operations B23K0001000000, Division (ROD), Plot No. : 9/1, DJ Block 3rd Floor, B23K0035020000 Karunamoyee, Salt Lake, Kolkata, West Bengal-700091, India. (31) Priority Document No :NA Registered Office: BHEL House, Siri Fort, New Delhi-110049, (32) Priority Date :NA India. (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)ARUNACHALAM SANTHAKUMARI Filing Date :NA 2)NAINIAPPAN RAJASEKARAN (87) International Publication No : NA 3)SENGANASARI VALLAIYAPPAN

(61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present subject matter relates to a process for butt welding of sheet metal plates by fusion welding processes (Shielded/Manual metal Arc Welding (SMAW/MMAW), Gas Metal Arc Welding (GMAW or MIG / MAG) to fabricate components as per ASME code. The process comprising the steps of: providing a first and a second sheet metal plates (1, 2) arranged to butt against each other in such a way that a root gap (G) is between the plates (1, 2); forming a weld bead on one side of the plates (1, 2) by fusion welding process using a pair of wire electrodes/welding consumable materials converging towards the gap (G) and extending transversely with respect to a direction of extension of the gap (G); after welding one side of the plates (1, 2), gouging on the opposite side of the plates (1, 2) using grinding.

No. of Pages : 17 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27423

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001757 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : FORMING METHOD FOR TRIPLE ELBOWS FOR PANELS IN SUPER CRITICAL BOILERS

:B23K0009173000, (71)Name of Applicant : B23K0035020000, 1)BHARAT HEAVY ELECTRICALS LIMITED (51) International classification B23K0035380000, Address of Applicant :Regional office: Regional Operations B23K0035220000, Division (ROD), Plot No. : 9/1, DJ Block 3rd Floor, B62K0021120000 Karunamoyee, Salt Lake, Kolkata, West Bengal-700091, India. (31) Priority Document No :NA Registered Office: BHEL House, Siri Fort, New Delhi-110049, (32) Priority Date :NA India. (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA 1)ARUNACHALAM SANTHAKUMARI Filing Date :NA 2)NAINIAPPAN RAJASEKARAN (87) International Publication No : NA 3)KRISHNAN RAVINDRAN (61) Patent of Addition to Application Number :NA 4)RENGASAMY SELVARAJ Filing Date :NA 5)DHAYANITHI RAMA ARAVINDHAN (62) Divisional to Application Number :NA 6)VISHAL SINGH

Filing Date :NA

(57) Abstract : This invention relates to forming of triple elbows by welding instead of forging for super critical boilers heat exchangers, etc. This novel invention relates to the development of procedure for achieving full penetration welds with square butt edge preparation by fusion welding processes (Shielded / Manual Metal Arc Welding (SMAW / MMAW), Gas Metal Arc Welding (GMAW or MIG / MAG) to form triple elbows as per ASME or equivalent code, etc. This invention related to the process development for joining triple elbows with a different innovative method of welding instead of forging method.

No. of Pages : 17 No. of Claims : 5

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27424

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001794 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : PUFFED RICE (MURI) MAKING SYSTEM-LPG BASED.

:A23L0007196000, (71)Name of Applicant : F02M0021020000, 1)INDIAN INSTITUTE OF TECHNOLOGY, (51) International classification A23L0007178000, KHARAGPUR A23P0030380000, Address of Applicant :Sponsored Research & Industrial A23L0007174000 Consultancy, Indian Institute of Technology, Kharagpur (31) Priority Document No :NA Kharagpur West Bengal India PIN-721302 (32) Priority Date :NA (72)Name of Inventor : (33) Name of priority country :NA 1)BHADORIA, Prof. Pratap Bhanu Singh

(57) Abstract : The present invention relates to a motorised puffed rice(Muri) making machine wherein the parboiled rice is heated by LPG based flame in a rotating drum rotated by a motor wherein sand is preheated to puffing temperature. The muri making machine contains a cylindrical drum made up of stainless steel which is driven by 1Hp motor. This rotating cylindrical drum/handi contains sand and the drum is heated by a Liquefied Petroleum Gas (LPG) as a fuel which takes around 30-40 min for heating. The parboiled/conditioned/preheated rice prepared separately in a pan/kadahiis poured into this rotating drum, which is maintained at the desired puffing temperature. Rice expands almost instantaneously and translates into puffed-rice within 18-20 seconds. Puffed rice is immediately separated from hot sand by specially designed separating sieve which delivers the puffed rice out of the rotating handi. The muri machine is simple yet efficient machine which increases the yield of puffed rice.

No. of Pages : 22 No. of Claims : 13

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27425

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001796 A (19) INDIA (22) Date of filing of Application :15/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : AN IMPROVED HEAT SINK SYSTEM FOR SUPPRESSING TWO-PHASE THERMAL AND FLOW INSTABILITIES AND A METHOD THEREOF

:H01L0023427000, (71)Name of Applicant : G01F0001684000, 1)Indian Institute of Technology Patna (51) International classification H01L0023473000, Address of Applicant :Bihta, Patna, Bihar - 801103, India G03F0007400000, (72)Name of Inventor : B23P0015260000 1)Deepak Sharma (31) Priority Document No :NA 2)Anurag Kumar (32) Priority Date :NA 3)Durga Prasad Ghosh (33) Name of priority country :NA 4)Rishi Raj (86) International Application No :NA 5)Sandip Kumar Saha

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present patent relates to an improved heat sink system (100) comprising a pulse dampener for suppressing two-phase thermal and flow instabilities and a method thereof. The heat sink system (100) mitigates flow fluctuations throughout the boiling regimes up to the very high heat fluxes in the annular flow regime and results in complete suppression of thermal and flow instabilities.

No. of Pages : 44 No. of Claims : 9

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27426

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001826 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DOOR LOCK

:F01L0001220000, (71)Name of Applicant : E05B0047000000, 1)DOOR & WINDOW HARDWARE CO. (51) International classification E05F0005000000, Address of Applicant :12F.-1, No. 666, Sec. 2, Wu Chuan F16D0065560000, West Road, Taichung City, Taiwan Postal code: 40869 F41A0009700000 (72)Name of Inventor : (31) Priority Document No :NA 1)Wei-Hung CHANG (32) Priority Date :NA 2)Chih-Lun HSIEH

(57) Abstract : A door lock (100) includes a follower (50), a slide block module (70) and an adjusting bolt (80). The follower (50) is rotatable in a first rotational direction (θ1) and in a second rotational direction (θ2). The slide block module (70) has a push surface (711) being in sliding contact with a contact surface (521) of the follower (50). The adjusting bolt (80) engages drivingly a threaded hole (721) of the block module (70), and is rotatable for moving the push surface (711) to thereby slightly rotate the follower (50) in the second direction (θ2) against a resilient force of a second resilient member (60). The adjusting bolt (80) is reversely rotatable to move the push surface (711), so that the follower (50) is slightly biased by the second resilient member (60) to rotate in the first direction (θ1).

No. of Pages : 44 No. of Claims : 11

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27427

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001935 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : CEILING FAN BLADE ASSEMBLY

:F04D0025080000, (71)Name of Applicant : F04D0029380000, 1)ORIENT ELECTRIC LIMITED (51) International classification F01D0005140000, Address of Applicant :Unit VIII, Plot No. 7, Bhoi Nagar, F04D0029340000, Bhubaneswar - 751012, Orissa, India. F04D0029020000 (72)Name of Inventor : (31) Priority Document No :NA 1)BRIJESH KUMAR (32) Priority Date :NA 2)MANJUNATHA AR (33) Name of priority country :NA 3)SURESH KUMAR

(86) International Application No :PCT// Filing Date :01/01/1900 (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present subject matter relates to a ceiling fan (300) with a convex shaped fan blade (202) for higher air delivery at fan sweep size at a range of 1200 mm to 1350 mm. The present convex shaped fan blade (202) has curved profile and variable thickness to provide higher air delivery and less noise. The fan blade (202) has a lift angle (201) in range of 7o to 12o and twist angle is in range of 20o to 10o. Further, width of the fan blade (202) is in range of 100 mm to 150 mm and Further, diameter of rotating blade hub (200) is in range of 110 mm to 150 mm.

No. of Pages : 16 No. of Claims : 14

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27428

(12) PATENT APPLICATION PUBLICATION (21) Application No.201931001983 A (19) INDIA (22) Date of filing of Application :16/01/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : ORAL CARE HERBAL COMPOSITION AND A METHOD THEREOF

:A61Q0011000000, (71)Name of Applicant : A61K0035644000, 1)Siksha 'O' Anusandhan (Deemend To Be University) (51) International classification A61K0036906800, Address of Applicant :J-15, Khandagiri Square, Bhubaneswar- A61K0036185000, 751 030, Odisha, India. A61K0008190000 (72)Name of Inventor : (31) Priority Document No :NA 1)Dr. Sanat Kumar Bhuyan (32) Priority Date :NA 2)Dr. Ruchi Bhuyan (33) Name of priority country :NA 3)Sidhant Bhuyan

(86) International Application No :PCT// Filing Date :01/01/1900 (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present invention relates to an oral care herbal composition and a method thereof for providing effective relief from the symptoms of oral mucosal lesions. The composition comprises of, 20-50% by wt. of Moringa Oleifera leaf extract, 20-50% by wt. of curcumin, 1-25 % by wt. of propolis, and 0.1-10 % by wt. of at least one flavoring agent. The method of preparation of the composition comprises the steps of, extracting the propolis from a bee hive, then adding curcumin and leaf extract to the propolis to obtain a thick paste, and adding the flavoring agent to the paste to obtain the composition.

No. of Pages : 15 No. of Claims : 8

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27429

(12) PATENT APPLICATION PUBLICATION (21) Application No.201934052701 A (19) INDIA (22) Date of filing of Application :18/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : IMPROVED APPARATUS

:E02F0003360000, (71)Name of Applicant : B66F0009065000, 1)MANITOU ITALIA S.r.l. (51) International classification B65B0011020000, Address of Applicant :VIA CRISTOFORO COLOMBO, 2 - E01C0023088000, LOCALITÀ CAVAZZONA 41013 CASTELFRANCO EMILIA G01B0005012000 (MODENA) ITALY (31) Priority Document No :102019000000607 (72)Name of Inventor : (32) Priority Date :15/01/2019 1)IOTTI Marco

(33) Name of priority country :Italy (86) International Application No :NA Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Described is an apparatus (2) for a self-propelled operating machine (10) comprising a supporting frame (21, 22, 23) designed to be fastened at the rear to an attaching device wherein an operating arm (102) of the machine (10) is provided and designed to be coupled at the front to a tool (3). The frame includes two lateral uprights (21, 22) joined at the top by a transversal plate (23).

No. of Pages : 16 No. of Claims : 10

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27430

(12) PATENT APPLICATION PUBLICATION (21) Application No.201934053410 A (19) INDIA (22) Date of filing of Application :23/12/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : “PROJECTOR FOR PROJECTING IMAGES”•

:H04N0009310000, (71)Name of Applicant : G02B0013160000, 1)CARL ZEISS JENA GMBH (51) International classification G03B0021000000, Address of Applicant :Carl-Zeiss-Promenade 10, 07745 Jena, G03B0021140000, Germany H04N0013324000 (72)Name of Inventor : (31) Priority Document No :102019100480.2 1)ENRICO GEISSLER (32) Priority Date :10/01/2019 2)CARSTEN WEHE (33) Name of priority country :Germany 3)BRYCE ANTON MOFFAT (86) International Application No :NA 4)CHRISTOPH NIETEN

Filing Date :NA (87) International Publication No : NA (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provision is made of a projector for projecting an image, comprising a first modulator (3), which has a plurality of first pixels (K1) capable of being impinged on by light from a light source (2), a second modulator (5), which is disposed downstream of the first modulator (3) and has a plurality of second pixels (K2), and an imaging optical unit (4), which images the first modulator (3) onto the second modulator (5), wherein the projector (1) furthermore has a projection optical unit (6), which images light coming from the second modulator (5) onto a projection surface (10) in order to project the image, as a result of which each second pixel is assigned to an image point of the projected image, and a control unit (7), which drives the two modulators (3, 5) on the basis of supplied image data (BD), wherein the control unit drives the modulators (3, 5) for the range of the minimum possible to the maximum possible brightness of the image data (BD) with a first resolution of NN levels, wherein NN is an integer greater than one, and wherein the control unit (7) A) applies a predefined brightness change to the brightness value in accordance with the image data (BD) for the image point such that a changed brightness value having a second resolution, which is greater than the first resolution, is calculated, and B) converts the changed brightness value into the increased brightness value such that it has the first resolution and is greater than a notional comparison value having the first resolution that arises if the predefined brightness change is applied to the brightness value in accordance with the image data (BD), with the result that the control unit (7) drives one of the modulators (3, 5) for a pixel to be boosted with the increased brightness value having the first resolution.

No. of Pages : 117 No. of Claims : 16

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27431

(12) PATENT APPLICATION PUBLICATION (21) Application No.201937028207 A (19) INDIA (22) Date of filing of Application :13/07/2019 (43) Publication Date : 17/07/2020

(54) Title of the invention : DUPLICATION-MODE COMMUNICATION PROCESSING METHOD AND DEVICE UNDER CU- DU ARCHITECTURE

(51) International classification :H04W 76/11 (71)Name of Applicant : (31) Priority Document No :201810032653.6 1)HUAWEI TECHNOLOGIES CO., LTD. (32) Priority Date :12/01/2018 Address of Applicant :Huawei Administration Building, (33) Name of priority country :China Bantian, Longgang District Shenzhen, Guangdong 518129 (86) International Application No :PCT/CN2019/071563 (72)Name of Inventor : Filing Date :14/01/2019 1)LUO, Haiyan (87) International Publication No :WO 2019/137519 2)YANG, Xudong (61) Patent of Addition to Application 3)PENG, Wenjie :NA Number 4)DAI, Mingzeng :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Provided is a duplication-mode communication processing method under a centralized unit-distributed unit (CU-DU) architecture. In a possible implementation method in the process of establishing a user-plane tunnel between a CU and a DU through the interaction between information of an uplink tunnel endpoint and information of a downlink tunnel endpoint an identifier of a primary channel is provided by the DU to the CU so as to implement a duplication mode of a data radio bearer.

No. of Pages : 34 No. of Claims : 41

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27432

(12) PATENT APPLICATION PUBLICATION (21) Application No.202037014920 A (19) INDIA (22) Date of filing of Application :03/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : COMMUNICATION METHOD AND APPARATUS

(51) International classification :H04L 29/06 (71)Name of Applicant : (31) Priority Document No :201810032285.5 1)HUAWEI TECHNOLOGIES CO., LTD. (32) Priority Date :12/01/2018 Address of Applicant :Huawei Administration Building, (33) Name of priority country :China Bantian, Longgang District Shenzhen, Guangdong 518129 (86) International Application No :PCT/CN2019/071634 (72)Name of Inventor : Filing Date :14/01/2019 1)HUANG, Huang (87) International Publication No :WO 2019/137534 2)GAO, Kuandong (61) Patent of Addition to Application 3)YAN, Mao :NA Number 4)SHAO, Hua :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Disclosed are a communication method and apparatus. The method comprises: a terminal device acquiring index information of a downlink synchronization signal block; the terminal device receiving information for indicating an association relation between a random access resource (RO) and the synchronization signal block; and according to the information, the terminal device accessing a network device on the RO corresponding to the synchronization signal block index information. Also disclosed is a corresponding apparatus. By indicating a time-frequency position of a random access resource associated with each downlink synchronization signal, the terminal device can acquire a time-frequency position of an uplink transmitted random access signal by means of downlink synchronization, avoiding blind trials of the terminal device and beam mismatching of the network device receiving the random access signal, improving efficiency.

No. of Pages : 89 No. of Claims : 47

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27433

(12) PATENT APPLICATION PUBLICATION (21) Application No.202037017396 A (19) INDIA (22) Date of filing of Application :23/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : METHOD AND APPARATUS FOR TRANSMITTING AND RECEIVING DATA CHANNEL AND CONTROL CHANNEL IN WIRELESS COMMUNICATION SYSTEM

(51) International classification :H04W 72/12 (71)Name of Applicant : (31) Priority Document No :10-2018-0004341 1)SAMSUNG ELECTRONICS CO., LTD. (32) Priority Date :12/01/2018 Address of Applicant :129, Samsung-ro, Yeongtong-gu, (33) Name of priority country :Republic of Korea Suwon-si, Gyeonggi-do 16677 (86) International Application No :PCT/KR2019/000379 (72)Name of Inventor : Filing Date :10/01/2019 1)KIM, Taehyoung (87) International Publication No :WO 2019/139368 2)KIM, Youngbum (61) Patent of Addition to Application 3)YEO, Jeongho :NA Number 4)OH, Jinyoung :NA Filing Date 5)CHOI, Seunghoon

(62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : The present disclosure relates to a communication method and system for converging a 5th-Generation (5G) communication system for supporting higher data rates beyond a 4th-Generation (4G) system with a technology for Internet of Things (IoT). The present disclosure may be applied to intelligent services based on the 5G communication technology and the IoT-related technology, such as smart home, smart building, smart city, smart car, connected car, health care, digital education, smart retail, security and safety services. A method for transmitting data in a wireless communication system includes transmitting configuration information on rate matching including information on a rate matching resource group to a terminal; transmitting aggregation information indicating a number of a plurality of slots for multi-slot scheduling to the terminal; transmitting scheduling information including a rate matching indicator indicating whether rate matching based on the rate matching resource group is performed; identifying a resource for transmitting data based on the aggregation information and the rate matching indicator; and transmitting data on the resource in the plurality of slots, wherein the resource in the plurality of slots is identified by excluding resources indicated by the rate matching indicator.

No. of Pages : 29 No. of Claims : 15

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27434

(12) PATENT APPLICATION PUBLICATION (21) Application No.202037018527 A (19) INDIA (22) Date of filing of Application :30/04/2020 (43) Publication Date : 17/07/2020

(54) Title of the invention : FLEXIBLE DISPLAY DEVICE

:G09F 9/30, G06F (71)Name of Applicant : (51) International classification 1/16, H04M 1/02, 1)LG ELECTRONICS INC. H04M 1/13 Address of Applicant :128, Yeoui-daero Yeongdeungpo-gu (31) Priority Document No :62/770840 Seoul 07336 (32) Priority Date :23/11/2018 (72)Name of Inventor : (33) Name of priority country :U.S.A. 1)KIM, Sungpil

(86) International Application No :PCT/KR2019/000448 Filing Date :11/01/2019 (87) International Publication No :WO 2020/105796 (61) Patent of Addition to Application :NA Number :NA Filing Date (62) Divisional to Application Number :NA Filing Date :NA

(57) Abstract : Disclosed is a flexible display device comprising: a first body and a second body; a hinge unit for connecting the first body and the second body so as to enable relative rotations thereof; a flexible display unit arranged on one surface of the first body and the second body, and folded and unfolded by the relative rotations; a covering member arranged between the first body and the second body so as to cover a space, formed by the folding of the flexible display unit, between the first body and the second body; and a lever connected to the hinge unit so as to rotate in connection with the folding and the unfolding of the flexible display unit, and formed so as to support at least a part of the covering member.

No. of Pages : 48 No. of Claims : 15

CONTINUED TO PART- 2

The Patent Office Journal No. 29/2020 Dated 17/07/2020 27435