DOCSLIB.ORG

VX Wiring and Installation Manual

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
VX Wiring and Installation Manual V44 and V88 Product Warranty Statement All products manufactured or distributed by Electronz Ltd are subject to the following, and only the following, LIMITED EXPRESS WARRANTIES, and no others. For a period of one (1) year from and after the date of purchase of a new Electronz Ltd product, Electronz Ltd warranties and guarantees only to the original purchaser that such a product shall be free from defects of materials and workmanship in the manufacturing process. A product claimed to be defective must be returned to the place of purchase. Electronz Ltd, at its sole option, shall replace the defective product with a comparable new product or repair the defective product. This expressive warranty shall be inapplicable to any product not properly installed or properly used by the purchaser or end user, or to any product damaged or impaired by external forces. This is the extent of warranties available on this product. Electronz Ltd shall have no liability whatsoever for consequential damages following from the use of any defective product or by reason of the failure of any product. Electronz Ltd specifically disclaims and disavows all other warranties, express or implied, including, without limitation, all warranties of fitness for a particular purpose, warranties of description, warranties of merchantability, trade usage or warranties of trade usage. For off-road use only, not intended for highway vehicles. Electronz Ltd License Agreement The programme in this system is licensed not sold. Electronz Ltd grants the user a license for the programme only in the country where the programme was acquired. No other rights are granted under this license and the programme may only be used on one machine at a time. If the programme is transferred a copy of this license and all other documentation must be transferred at the same time. The license may be terminated by the user at any time. Electronz Ltd may terminate the licence if the user fails to comply with the terms and conditions of this license. In either event the copy of the programme must be destroyed. Contents 3 Table of Contents 0 Part I Introduction 7 1 Suppo.r.t. .O..p..t.i.o..n..s..................................................................................................................... 7 Part II Choosing a Configuration 9 1 Injecto.r. .O...u..t.p..u..t.s..................................................................................................................... 9 2 Ignitio..n.. .O...u..t.p..u..t.s................................................................................................................... 10 3 Auxili.a..r..y.O...u..t.p..u..t.s.................................................................................................................. 10 4 Analo.g../.T..e..m...p..e..r..a..t.u..r.e.. .I.n..p..u..t.s................................................................................................. 11 5 Digita.l. .I.n..p..u..t.s........................................................................................................................ 11 6 Trigge..r.. .I.n..p..u..t.s...................................................................................................................... 12 7 Summ..a..r..y............................................................................................................................. 12 8 Instal.l.e..r. .I.O.. .T..a..b..l.e.................................................................................................................. 14 Part III Component Installation Locations 17 1 ECU L..o..c.a..t.i.o..n........................................................................................................................ 17 2 Ignitio..n.. .C..o..m...p..o..n..e..n..t. .P...l.a..c.e..m...e..n..t........................................................................................... 17 3 MAP S...e..n..s.o..r. .L..o..c..a..t.i.o..n........................................................................................................... 18 Part IV V44 Header Pinout 19 Part V V88 Header Pinout 20 Part VI Communications Port Pinout 22 Part VII Power and Ground Wiring 23 1 Powe.r. .S...u..p..p..l.i.e..s................................................................................................................... 23 2 +14V .I.n................................................................................................................................. 24 3 +14V .A..u..x..9../.1..0....................................................................................................................... 24 4 Powe.r. .G...r.o..u..n..d...................................................................................................................... 24 5 Senso..r. .G...r.o..u..n..d..................................................................................................................... 24 6 +5V O..u..t............................................................................................................................... 25 7 +8V O..u..t............................................................................................................................... 25 8 ECU H..o..l.d.. .P..o..w...e..r. .W...i.r..i.n..g....................................................................................................... 25 Part VIII Input Signal Wiring 27 1 Trigge..r.. .I.n..p..u..t.s...................................................................................................................... 27 Reluctor/Magn..e...t.i.c.. .S..e...n..s..o...r.s... ................................................................................................................................ 27 Hall/Optical/Pr.o..x..i.m....i.t.y.. .S..e...n..s..o...r.s... ........................................................................................................................... 29 Audi Quattro 5.. .C...y..l.i.n..d..e...r. ........................................................................................................................................ 30 BMW M50 .......................................................................................................................................................... 30 Crank Angle S..e..n...s..o..r..s.. ........................................................................................................................................... 31 Ford Motorcra..f.t.. ..................................................................................................................................................... 31 GT101 Hall Effe..c..t.. .S..e..n...s..o..r.. ...................................................................................................................................... 32 Honda 24 Toot..h.. ...................................................................................................................................................... 34 Honda Civic EK.. ........................................................................................................................................................ 34 3 © 2012 Vi-PEC 4 VX Wiring and Installation Manual Honda S2000 .......................................................................................................................................................... 35 GM LS1 .......................................................................................................................................................... 36 Mazda 13B Se.r.i.e...s.. .4.. .&... .5.. ........................................................................................................................................ 36 Mazda 13B Se.r.i.e...s.. .6..,. .7.. .&... .8.. .................................................................................................................................... 37 Mazda 323 (Dis...t.r..i.b..u..t..o..r..). ........................................................................................................................................ 37 Nissan ECCS .......................................................................................................................................................... 38 Nissan SR20DE.. .D...i.s..t.r..i.b..u...t.o..r.. ................................................................................................................................... 39 Nissan VH41 .......................................................................................................................................................... 39 Nissan VH45 .......................................................................................................................................................... 40 Nissan VQ30 .......................................................................................................................................................... 41 Subaru EJ .......................................................................................................................................................... 42 Subaru EZ30R. ......................................................................................................................................................... 43 Toyota 1UZ-FE. ......................................................................................................................................................... 43 Toyota 1ZZ-FE. ........................................................................................................................................................
Load more

Recommended publications
  • Water Outlet Housing Water Pipe
    AUDI WATER PIPE ADP-001 ADP-002 ADP-003 #OE： 026121065-2 #OE： 026121065-1 #OE： 026121065D Model： AUDI 80 Model： AUDI 80 Model： AUDI 80 '88- ADP-004 ADP-005 ADP-006 #OE： 026121065B #OE： 048121065D #OE： 072121081B Model： AUDI 80 '87- Model： AUDI 80 '92- Model： AUDI 100 WATER OUTLET ADO-001 ADO-002 #OE： 037121145F-1 #OE： 037121145F Model： AUDI '80- Model： AUDI '80- HOUSING ADH-001 ADH-002 ADH-003 028121144M 037121132G #OE： 028121132 #OE： 028121145C #OE： 030121133K AUDI 80 A6 A4, Model： Model： Model： AUDI 80, A6, AUDI 100 80 A6, VW PASSAT CABRIOLET SEAT TOLEDO AUDI HOUSING ADH-004 ADH-005 ADH-006 #OE： 058121132A #OE： 030121121B #OE： 055121121F Model： AUDI, SKODA, VW Model： AUDI, VW, SEAT Model： AUDI, VW, SEAT ADH-007 ADH-008 ADH-009 06B121121 068121144 06A121133C #OE： 038121121B #OE： 068121145Q #OE： 06A121132A Model： AUDI A6, A4 Model： AUDI 80 Model： AUDI, VOLKSWAGEN ADH-010 #OE： 06B12111K Model： AUDI, VOLKSWAGEN BMW WATER PIPE BWP-001 BWP-002 BWP-003 #OE： 11 53 1 714 738 #OE： 11 53 1 706 969 #OE： 11 12 1 264 600 Model： BMW M40 Model： BMW M40 Model： BMW M20 E34 BWP-004 BWP-005 #OE： 11 12 1 717 432 #OE： B11 121 740 396 Model： BMW M50 Model： BMW M20/M50/M52 WATER OUTLET BWO-001 BWO-002 BWO-003 #OE： 1265058 #OE： 1722853 #OE： 11 53 1 720 173 Model： BMW E28/E34 Model： BMW Model： BMW E34 HOUSING BWH-001 BWH-002 BWH-003 11531722531 #OE： 11531722853 #OE： 11531740478 #OE： 11531709232 Model： BMW Model： BMW Model： BMW BMW HOUSING BWH-004 BWH-005 BWH-006 11531739752 #OE： 11531739755 #OE： 11531739208 #OE： 11531743200 Model： BMW 3 Model： BMW 3 Model： BMW 3 BWH-007 BWH-008 BWH-009 #OE： 11537829959 #OE： #OE： Model： BMW Model： BMW Model： BMW MERCEDES BENZ WATER OUTLET BZO-001 BZO-002 BZO-003 #OE： R104 203 02 74 #OE： 103 200 01 17 #OE： 102 200 04 17 Model： M.
    [Show full text]
  • Benz & Bmw Tool
    BENZ & BMW TOOL JTC-1011 CRANKSHAFT PULLY HOLDER JTC-1115 BMW BUSH REMOVER / INSTALLER JTC-1123 IGNITION LOCK REMOVER Removal and replacement tool for For removal and replacement of For removal and replacement of metallic bushes on rear axles. the ignition switch retaining ring the crankshaft bolt, M112 and Applicable: BMW E38, E39, E53, fitted to Mercedes types W129, M113, as found on E320, E430, etc. E60, E61, E 63, E64, E65, E66, E67, W140, W202, W210, W220, W203, Applicable: BENZ M112, M113, E70, F01, F02, F04, F07, F10, F11, W209, W211, W204. M137, M155, M156, M275, M288 and F18. JTC AUTO TOOLS 2600 Northlake Dr. Suite F, Suwanee, GA, 30024 BENZ & BMW TOOL JTC-1124 WHEEL STUD ALIGNMENT GUIDE TOOL (M14) JTC-1215 BMW REAR AXLES BUSH REMOVER / INSTALLER JTC-1231 MB TRANSMISSION DIPSTICK (722.6) Assists when mounting wheels, especially Removal and replacement tool for metallic The tool is designed to measure the oil late models with long lug bolts. bushes on rear axles BMW type E36, E46. level of transmission. Replacement of the mounting bushes without Size: M14 x 1.5 Full length: 1220mm removing the complete rear axle assembly. Applicable: All Mercedes models with lug Applicable: BMW E36, E46, E85 Applicable: transmission type 722.6 bolts. JTC AUTO TOOLS 2600 Northlake Dr. Suite F, Suwanee, GA, 30024 BENZ & BMW TOOL JTC-1232 MB TRANSMISSION DIPSTICK JTC -1233 MB TRANSMISSION DIPSTICK (STRAIGHT END) JTC-1234 MB TRANSMISSION DIPSTICK (VOLUTE END) (722.7, 716.5, 722.8) Full length: 930mm, balance the top of Full length: 930mm, the top of the oil The tool is designed to measure the oil level the oil gauge.
    [Show full text]
  • Review of Advancement in Variable Valve Actuation of Internal Combustion Engines
    applied sciences Review Review of Advancement in Variable Valve Actuation of Internal Combustion Engines Zheng Lou 1,* and Guoming Zhu 2 1 LGD Technology, LLC, 11200 Fellows Creek Drive, Plymouth, MI 48170, USA 2 Mechanical Engineering, Michigan State University, East Lansing, MI 48824, USA; [email protected] * Correspondence: [email protected] Received: 16 December 2019; Accepted: 22 January 2020; Published: 11 February 2020 Abstract: The increasing concerns of air pollution and energy usage led to the electrification of the vehicle powertrain system in recent years. On the other hand, internal combustion engines were the dominant vehicle power source for more than a century, and they will continue to be used in most vehicles for decades to come; thus, it is necessary to employ advanced technologies to replace traditional mechanical systems with mechatronic systems to meet the ever-increasing demand of continuously improving engine efficiency with reduced emissions, where engine intake and the exhaust valve system represent key subsystems that affect the engine combustion efficiency and emissions. This paper reviews variable engine valve systems, including hydraulic and electrical variable valve timing systems, hydraulic multistep lift systems, continuously variable lift and timing valve systems, lost-motion systems, and electro-magnetic, electro-hydraulic, and electro-pneumatic variable valve actuation systems. Keywords: engine valve systems; continuously variable valve systems; engine valve system control; combustion optimization 1. Introduction With growing concerns on energy security and global warming, there are global efforts to develop more efficient vehicles with lower regulated emissions, including hybrid electrical vehicles, electrical vehicles, and fuel cell vehicles. Hybrid electrical vehicles became a significant part of vehicle production because of their overall efficiency, and they still pose a significant cost penalty, resulting in a stagnant market penetration of 3.2% and 2.7% in 2013 and 2018, respectively, in the United States (US), for example [1].
    [Show full text]
  • Engine Timing Tool Kit BMW M50 & M52 Petrol
    Part No. 3113 Instructions Engine Timing Tool Kit BMW M50 & M52 Petrol Please refer to www.lasertools.co.uk/toolpoint to check the most up to date product applications. www.lasertools.co.uk Introduction Applications This comprehensive set of tools enables the correct timing positions to be achieved on both The application list for this product has been compiled cross referencing the OEM Tool Code camshaft and crankshaft whilst replacing the timing belt on both petrol and diesel engines. Note with the Component Code. that the 2,5 litre diesel engine is also used in some Range Rover and Vauxhall / Opel Omega In most cases the tools are specific to this type of engine and are necessary for cam belt or models. chain maintenance. • This kit includes a special wrench for controlled turning of the exhaust camshaft sprocket If the engine has been identified as an interference engine valve to piston damage will occur if when removing and installing the VANOS unit. the engine is run with a broken cambelt. • Also included is a primary timing chain pre-load tool for tensioning the timing chain on M50, A compression check of all cylinders should be performed before removing the cylinder head. M52, M42 & M60 engines. Always consult a suitable workshop manual before attempting to change the cambelt or chain. • Specifically designed for M42, M43, M50, M52 and M60 petrol engines • Can also be used on M51 diesel engine. The use of these engine timing tools is purely down to the user’s discretion and The Tool Connection Ltd cannot be held responsible for any damage caused what so ever.
    [Show full text]
  • Supertech Valve Train Components 2018/09 to Account for Circumstances Beyond Our Control
    While great care has been taken to ensure the accuracy of all prices, The Starting Grid reserves the right to correct errors and adjust prices Supertech Valve Train components 2018/09 to account for circumstances beyond our control. Part Number Part Descriptions *US$ M.A.P. Set BMW VALVES *€uro pricing on request. BMEVI-1006/L BMW S14 Exhaust valve 32 (std) x 6.95 x 125.00mm/Tip 12.5mm/ Inconel / triple groove/ flat/swirl polish. US$ 37,41 BMEVI-1010 BMW S14 Exhaust valve 33 x 6.95 x 123.7mm/ INCONEL/ triple groove/Flat US$ 37,41 BMEVI-1030S BMW M50/52 Single GrooveExhaust valve 30.5x5.96x105.65mm/INCONEL /Stk.size US$ 37,41 BMEVI-1031S BMW M50/52 Single Groove Exhaust valve 31.5x5.96x105.65mm/ INCONEL/1+mm US$ 37,41 BMEVI-1030PSL BMW S50/B32 Exhaust valve 31.00(+0.5) x5.98x122.80mm/ SS EV16 /Blk. Inconel /Single Groove US$ 37,41 BMEVI-1036 BMW S50B30 Euro Version Exhaust valve 30.6x5.96x105.65mm/ INCONEL/1+mm US$ 37,41 BMEVI-1040 BMW M3 S54/ Exhaust valve 30.5x6.95x121mm/ INCONEL/Stk.size/ Triple Groove US$ 39,38 BMEVI-1040S BMW M3 S54/ Exhaust valve 30.5x6.95x121mm/ INCONEL/Stk.size/ Single Groove US$ 39,38 BMEVI-1040S-LC BMW M3 S54/ Exhaust valve 30.5x6.95x121mm/ INCONEL/Stk.size/ Single Groove - To be used with Lash Cap US$ 49,66 BMEVI-1045S BMW M3 S54/ Exhaust valve 31.5(+1)x5.955x119.6mm/INCONEL/Single groove US$ 37,41 BMEVI-1081S BMW S62 V8 Exhaust valve 30.50 x 6.04 (1st over) x103.5mm/ Inconel/Dish/Single groove.
    [Show full text]
  • €32.45Exc. €16.95Exc. €51.95Exc. €36.45Exc. €42.95
    Pocket Digital Battery Tester Multimeter New with Printer 6/12V • Fast, accurate diagnosis and recording • Features flip lid for added screen of battery faults. protection and storage of leads. • LCD Screen shows • Conforms to EN 61010-1 CAT II easy-to-follow test prompts and results. safety requirements. • Integral printer will produce hard-copy • Measures: results for your own or customer’s records. » AC and DC Voltage • Suitable for Regular Liquid, AGM Flat Plate, » DC Current AGM Spiral and Gel batteries. » Resistance • Supplied with carry-case, two printer rolls and » Audible Continuity instruction manual. • Model No. MM18 EXC. • Model No. BT2013 EXC. VAT VAT • RSP Price €24.65 €16.95 • RSP Price €363.95 €285.95 13 Function 11 Function 7 Function Digital Digital Professional Automotive Automotive Digital Analyser Analyser Multimeter with NCVD Inductive • Durable bi-composite • High precision case and integral stand multimeter. Coupler suitable for the toughest • Conforms to EN 61010-1 • Four-digit 22mm, workshop conditions. CATIII 600V safety high contrast LCD • Large, hi-contrast LCD requirements for display and backlight. display with 34mm electrical equipment for • Features high digital read-out. measurement, control auto-ranging, • Over-range indication, and laboratory use. data-hold and auto-zeroing, data-hold, • Features non-contact auto-power-off AC voltage detection functions. auto-polarity, function. • Includes inductive auto-power-off • Double moulded coupler for fast and low battery reading of display functions. housing with soft grip engine rpm. • Supplied with capped case and large display • Supplied with probe, test probes and K-type for ease of use. crocodile clip and thermocouple.
    [Show full text]
  • Engine Components
    WHOWHO ISIS SUPERTECHSUPERTECH “Supertech“Supertech fusesfuses thisthis technologytechnology withwith passionatepassionate people...”people...” Located in San Jose, California in the heart of Silicon Valley, Supertech was born from the same fertile ground as many other companies in this area utilizing cutting edge technology to fuel growth. Supertech fuses this technology with passionate people and over 30 years of experience in creating the highest performance valves and valve train components available. Supertech provides the racing market with superior valves and valve train components for virtually every type of racing. Whether it’s Drag Racing, Rally, Road Racing or any other type of motorsport, Supertech is sure to have the perfect performance solution for your application. If not, we are always willing to work with you to custom manufacture the solution that is just right for you. PAGE 2 ABOUT SUPERTECH 01 ENGINE VALVE MANUFACTURING 05-06 VALVE MATERIALS 07-12 Materials 07 Stainless Steel 08 Black Nitride 09 Inconel 751 / Nimonic 80A 11 Valve Specs 10 Sodium Filled Inconel / Nimonic Alloy 11 Titanium 12 Yellow Titanium Nitride (TiN) 12 Chrome Notrode (CrN) 12 Molybdenum Coating 12 VALVE SPRING TECHNOLOGY 13-14 Retainers 14 Valve Guides 14 Valve Seals 14 Lash Caps 14 BUCKET TYPE CAM FOLLOWERS 71-73 VALVE GUIDES / VALVE SEALS 73-76 PISTONS 77-89 Piston Manufacturing 78 Piston Surface Finish 78 HEAD GASKETS 90-94 RODS 95-98 POWERSPORTS 99-110 WARRANTY 111 ACCESSORIES 112 VALVES / SPRING APPLICATION 15-66 BMW 15-18 Ferrari 19 Ford
    [Show full text]
  • • BMW OBDII (OBD2) Fault Codes. (P1000
    BMW OBDII (OBD2) fault codes. (P1000 - P3500) (Manufacturer Specific) P1083 Fuel Control Mixture Lean (Bank 1 Sensor 1) P1084 Fuel Control Mixture Rich (Bank 1 Sensor 1) P1085 Fuel Control Mixture Lean (Bank 2 Sensor 1) P1086 Fuel Control Mixture Rich (Bank 2 Sensor 1) P1087 O2 Sensor Circuit Slow Response in Lean Control Range (Bank 1 Sensor 1) P1088 O2 Sensor Circuit Slow Response in Rich Control Range (Bank 1 Sensor 1) P1089 O2 Sensor Circuit Slow Response in Lean Control Range (Bank 1 Sensor 2) P1090 Pre-Catalyst Fuel Trim Too Lean Bank 1 P1091 Pre-Catalyst Fuel Trim Too Rich Bank 1 P1092 Pre-Catalyst Fuel Trim Too Lean Bank 2 P1093 Pre-Catalyst Fuel Trim Too Rich Bank 2 P1094 O2 Sensor Circuit Slow Response in Rich Control Range (Bank 2 Sensor 1) P1095 O2 Sensor Circuit Slow Switching From Lean to Rich (Bank 1 Sensor 1) P1096 O2 Sensor Circuit Slow Switching From Lean to Rich (Bank 2 Sensor 1) P1097 O2 Sensor Circuit Slow Response after Coast Down Fuel Cutoff (Bank 1 Sensor 1) P1098 O2 Sensor Circuit Slow Response after Coast Down Fuel Cutoff (Bank 2 Sensor 2) P1111 Engine Coolant Temperature Radiator Outlet Sensor Low Input P1112 Engine Coolant Temperature Radiator Outlet Sensor High Input P1115 Coolant Temperature Sensor Plausibility P1116 Mass Or Volume Air Flow Circuit Range/Performance Problem (Bank 2) P1117 Mass Or Volume Air Flow Circuit Low Input (Bank 2) P1118 Mass Or Volume Air Flow Circuit High Input (Bank 2) P1120 Pedal Position Sensor Circuit P1121 Pedal Position 1 Range/Performance Problem P1122 Pedal Position 1 Low
    [Show full text]
  • The Electromotive TEC M Is a Replacement Motherboard for the Motronic ECU That Controls Many Mid 90’S BMW’S
    The Electromotive TEC M is a replacement motherboard for the Motronic ECU that controls many mid 90’s BMW’s. The TEC M is not an aftermarket ECU with an adapter. It is a custom built motherboard designed specifically as a direct replacement for your Bosch Motronic motherboard with built in support for BMW specific features such as VANOS and A/C control. Electromotive TEC M can even be installed so that it leaves no outward sign of its presence. All interfaces to your car are supported. Plug in a Electromotive TEC M and the factory tach, CEL and fuel consumption gauge all work and the reliable factory engine harness stays intact. You get the advantages of a modern race ECU without the lost time and expense engineering and building a custom harness or changing sensors. The Electromotive TEC M replaces Motronic ‘413’ and ‘506’ ECU’s, including EWS units. They are common on BMW M50 (E36 325, E34 525) or S50 (E36 M3) engines and are often used in the popular ODB2 (M52, S52) to ODB1 intake and harness performance upgrade. Who can use a Electromotive TEC M? If you race in a series where you must manage different tunes for classification purposes (e.g. NASA GTS) the Electromotive TEC M is your ticket. Maybe you plan to build or already have a forced induction engine and need to take control of it. Or maybe you are one of those performance minded people who makes incremental changes and wants a platform that will grow with you. The Electromotive TEC M is an easy to implement solution for these projects and more.
    [Show full text]
  • Enjoy 20% Off Continental & General Tyres
    2019 Issue 159 BMW Car Club Victoria BMW Car Club of Victoria Member of BMW Clubs International Council UNCOMPROMISED PERFORMANCE FOR YOUR ULTIMATE DRIVING MACHINE. Your BMW is a finely crafted piece of machinery, but there is always some room for improvement. For over 10 years, SouthernBM has been providing high-end BMW focused performance and tuning solutions for those who demand perfection from their BMW. Our tuning and performance packages have seen the development of some of the fastest and most impressive BMWs on the road today thanks to our partnership with world leading brands such as ESS Tuning, Eisenmann, Akrapovic, Eventuri, KW Suspensions, Quaife and many more. No matter the level of performance you are looking to take your BMW to, we will have the perfect solutions and advice to suit your needs. FOLLOW US GET IN TOUCH (03) 9555 4049 SOUTHERNBM.COM.AU 1 SULLIVAN STREET, MOORABBIN Journal of the BMW Car Club of Victoria Inc. Member of the International Council of BMW Clubs Issue No. 159 Publisher BMW Car Club of Victoria Inc. Reg. No. A0045268J Graphic Design by Cornerstone Creative: www.cornerstonecreative.com.au Proudly printed by: Jossimo Print www.jossimo.com BMWCCV Inc. is a CAMS Affiliated Car Club Mob: 0404 148 632 Trackside Motorsport Photos courtesy of Rob Clark Editorial Address The Editor BMWCCV Top Marque GPO Box 1250 Melbourne Victoria 3001 General Mail & Enquiries The Secretary COMMITTEE CONTACT DETAILS BMW Car Club of Victoria Inc. GPO Box 1250 President Editor / Advertising Melbourne Victoria 3001 Paul Weatherall Liza Weatherall [email protected] [email protected] Try our website www.bmwccv.com.au for more club Vice President Activities / Events information.
    [Show full text]
  • RPO Codes and Descriptions
    RPO Codes and Descriptions Code Description AAB MEMORY DRIVER CONVENIENCE PACKAGE AAC SHIPPED LOOSE PARTS FOR SHIPPING INSTRUCTION AAD WINDOW BODY, LEFT SIDE AAE INTERIOR TRIM DELETE AAF 2009 OEM ENGINE PHYSICAL ID AAF & PRODUCTION NUMBER 12603557 AAG MEMORY PASS CONVENIENCE PACKAGE AAH RESTRAINT KNEE, INFLATABLE, LH AAI CONTROL A/TRANS, MODE, ECONOMY/POWER AAK LOCK CONTROL, ENTRY DOOR, ELEC, KEY ACTIVATED AAL RESTRAINT KNEE, BOLSTER, LH/RH AAM RESTRAINT,KNEE BOLSTER,DRIVER AAO WINDOW ABSORBING GLAZING AAP FLEET INCENTIVE US INVESTIGATION SERVICES (D/W/3A/3Z - TRK STUX) AAP IDENTIFICATION EFFECTIVE POINT CONTROL, 2012 1/2 M.Y. AAQ ADJUSTER PASS ST POWER, 4 WAY AAR KNEE BOLSTER, FOAM TYPE AAV INTERIOR TRIM CONFIG - DELETE AAW INTERIOR TRIM CONFIG #17 AAX INTERIOR TRIM CONFIG #18 AAY INTERIOR TRIM CONFIG #16 AAZ LOCK CONTROL SIDE DOOR, VEHICLE ACCELERATION ACTIVATED AA2 WINDSHIELD,TINTED,UNSHADED AA3 DEEP TINT GLASS(REAR SIDE WINDOWS ONLY) AA4 WINDOW SPECIAL GLAZING,DOMESTIC AA5 WINDOW RR QTR - DELETE AA6 WINDOW CLEAR, ALL AA7 WINDOW,ELECTRIC OPERATED,QUICK OPENING AA7 WINDOW,POWER OPERATED,QUICK OPENING AA8 WINDOW,REAR COMPARTMENT LIFT(NOTCHBACK) ABA SEAT CONFIGURATION #1 ABB SEAT CONFIGURATION #2 ABC SEAT CONFIGURATION #3 ABD SEAT CONFIGURATION #4 ABE SEAT CONFIGURATION #5 ABF SEAT CONFIGURATION #6 ABF AIRBAG,DUAL DRIVER AND PASSENGER ABG SEAT CONFIGURATION #7 ABH SEAT CONFIGURATION #8 ABI SEAT CONFIGURATION #11 ABJ SEAT CONFIGURATION #9 ABK SEAT CONFIGURATION #10 ABM SEAT CONFIGURATION #12 ABN SENSOR OXYGEN NON-HEATED ABN SALES PACKAGE
    [Show full text]
  • (Mootori Simulatsioon Ja Turboülelaadimissüsteemi
    Masinaehituse instituut Autotehnika õppetool MEA70LT Madis Pääbo MOOTORI SIMULATSIOON JA TURBOÜLELAADIMISSÜSTEEMI PROJEKTEERIMINE BMW M50-M54 MOOTORITELE Engine simulation and the design of a turbocharging system for BMW M50-M54 engines Autor taotleb tehnikateaduste magistri akadeemilist kraadi Tallinn 2015 AUTORIDEKLARATSIOON Deklareerin, et käesolev lõputöö on minu iseseisva töö tulemus. Esitatud materjalide põhjal ei ole varem akadeemilist kraadi taotletud. Töös kasutatud kõik teiste autorite materjalid on varustatud vastavate viidetega. Töö valmis.................................................. juhendamisel “.......”....................201….a. Töö autor .............................. allkiri Töö vastab magistritööle esitatavatele nõuetele. “.......”....................201….a. Juhendaja ............................. allkiri Lubatud kaitsmisele. ................................. eriala/õppekava kaitsmiskomisjoni esimees “.......”....................201… a. ............................. allkiri 2 TTÜ masinaehituse instituut Autotehnika õppetool MAGISTRITÖÖ ÜLESANNE 2014/2015 õppeaasta kevadsemester Üliõpilane: Madis Pääbo 111393 Õppekava: MATM Eriala: Transporditehnika Juhendaja: lektor Risto Kõiv MAGISTRITÖÖ TEEMA: Mootori simulatsioon ja turboülelaadimissüsteemi projekteerimine BMW M50-M54 mootoritele. Engine simulation and the design of a turbocharging system for BMW M50-M54 engines. Lõputöös lahendatavad ülesanded ja nende täitmise ajakava: Nr Ülesande kirjeldus Täitmise tähtaeg 1. Teema valik ja magistritöö ülesande püstitus 01.02.2015
    [Show full text]