MML Sports Ltd 18b Lanchester Way, Royal Oak, Daventry, Northamptonshire, NN11 8PH, UK +44 1327 702975, [email protected]
MITSUBISHI LANCER EVO X GROUP N and R4 RALLY CAR PRICE LIST JANUARY 2017
Prices are exclusive of VAT and shipping. All goods are subject to availability. Prices are correct at time of issue. All images are representative and actual product may vary. It is the responsibility of the consumer to determine suitability and legality of goods and services. Goods are sold for motorsport use only and no warranty is implied or given. MML Sports Ltd can not accept liability for products from third party suppliers. MML Sports Ltd reserves right to modify contents of the price list at any time. MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
CONTENTS 0 - 1 - 1
Group number Sub-group number Page number in sub-group A - B - C
0 - 1 - CONTENTS
0 - 2 - GROUP N SPECIFICATION
0 - 3 - BASE CAR
1 - 1 - ENGINE MECHANICAL
1 - 2 - ENGINE LUBRICATION
1 - 3 - ENGINE FUEL SUPPLY
1 - 4 - ENGINE COOLING
1 - 5 - ENGINE INTAKE AND EXHAUST
1 - 6 - ENGINE ELECTRICAL
2 - 1 - CLUTCH
2 - 2 - TRANSMISSION
3 - 1 - WHEELS AND TYRES
3 - 2 - SUSPENSION
3 - 3 - BRAKES
3 - 4 - STEERING
4 - 1 - BODYSHELL
4 - 2 - GUARDS
5 - 1 - EXTERIOR
5 - 2 - INTERIOR
5 - 3 - CHASSIS ELECTRICAL
6 - 1 - R4 KIT
6 - 2 - R4 SUSPENSION 6 - 3 - R4 BODY AND INTERIOR
9 - 1 - INDEX
9 - 2 - NOTES
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
GROUP N RALLY CAR SPECIFICATION 0 - 2 - 1 BASE SPECIFICATION FULL SPECIFICATION Minimum car build requirements Upgrades in addition to base specification Engine Carry out blue-print overhaul Upgrade head gasket, studs and bolts Upgrade connecting rods Lubrication Upgrade oil and filter Change oil cooler hoses to aviation type Fuel supply Modify injector rail Change fuel tank to safety cell Change lines to aviation type Fit fuel sampling connector Fit roll-over valve Cooling Upgrade thermostat and radiator cap Change radiator hoses to silicon VO option Intake Change air suction pipe to VO option Carry out turbocharger blue-print overhaul Fit air intake restrictor Upgrade air filter Exhaust Change pipe to straight layout system Change turbo outlet to fabricated part Fit catalytic converter Electrics Upgrade engine ECU w/map Upload fuel upgrade ECU map with Upgrade spark plugs over-ride boost and launch control Clutch Upgrade disc and cover Change master cylinder to VO option Change feed pipe to aviation type Gearbox Upgrade oil Change gear kit to dog engagement type Upgrade centre differential transfer shaft Differentials Upgrade front and rear LSD's to VO option Set-up LSD's to MML Sports settings Change ACD hydraulic lines to aviation type Fit q/d coupling on ACD hydraulic lines Upgrade ACD ECU w/map Upload performance ACD ECU map Wheels Upgrade wheel studs and nuts Use competition wheels Suspension Change engine mounts to VO option Upgrade front and rear anti roll bars Upgrade dampers and springs Change suspension bushes to hard rubber Brakes Upgrade master cylinder to VO option Fit front brake cooling ducts Remove brake booster and fit VO adaptor Fit VO hydraulic handbrake and bias valve Fit front and rear VO brake kits Upgrade brake pads to high-duty Change lines to aviation type Upgrade brake fluid Steering Change steering wheel to competition type Upgrade steering wheel to lightweight carbon Fit steering wheel hub adaptor and spacer Change PAS hoses to aviation type Body De-seal, bead blast and de-bracket body Fit roll cage, seat rails, axle stands Fit brackets, bosses and studs for car build Carry out paint work Guards Fit protective guards for engine, transmission, heat exchangers, underfloor, sills, fuel tank, hydraulic pump, wheel arches, propeller shaft, rear differential, rear suspension Fit mud flaps Exterior Fit bonnet and boot pins Fit roof vent and vertical door mirrors Interior Fit footwells for driver and co-driver Fit interior door cards Fit radio and floor console covers Fit screen and trip meter mounting brackets Fit wheel brace and mechanical scissor jack Upgrade jack to monkey-on-stick type Fit spare wheel strap Fit nut gun with mounting bracket Fit competition seats and harnesses Upgrade seats to lightweight carbon Fit hand held fire extinguisher Upgrade extinguisher to lightweight carbon Fit glass anti-shatter film, roll cage padding, Flock dashboard top roll first aid kit, harness cutters, warning triangle Electrical Fit auxiliary loom kit with gel battery Fit dashboard screen, shift light, trip meter Fit electrical fire extinguisher Upgrade light pod to HID unit Fit halogen bonnet light pod Labour Body, engine and transmission preparation, car build, engineering support Other Consumables, shipping services, shakedown
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
BASE CAR 0 - 3 - 1
MITSUBISHI LANCER EVOLUTION X RS
NEW CARS NO LONGER AVAILABLE GS41EVO
FIA HOMOLOGATION DOCUMENT #5718 Original copy of Lancer Evolution X homologation Includes A-5718 and N-5718 with all extensions Free 'COPY'-watermarked version available from ralliart.com
FIA5718 £125
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
ENGINE MECHANICAL 1 - 1 - 1
4B11 ENGINE ASSEMBLY Genuine MMC part Complete engine assembly with all ancillaries including flywheel, clutch, turbocharger, inlet/exhaust manifolds, pumps, electrical components Series part for spares / replacement 1000B062 £6,600
Gp N ENGINE BUILD Engine preparation by MML Sports to FIA Group N regulations - Blueprint overhaul, inclusive of head gasket and bolt upgrade - Con rod upgrade to VO homologated reinforced set - Turbocharger overhaul, inclusive of Ø33 mm restrictor fitment - Fuel rail and return modification for AN fittings - Oil filter, thermostat, spark plug upgrade Base engine to be supplied by customer or available direct from MML
99-GRNREBUILD (rebuild only) £5,600 99-GRNREBUILD-E (incl base engine) £12,200
REINFORCED CONNECTING ROD SET Genuine RalliArt part, VO homologated Essential engine upgrade as part of Gp N preparation High strength forged steel Supplied as set of 4-off RA111304S1 £555
CYLINDER HEAD GASKET Genuine HKS part Stopper type, multiple steel layers, fluorine rubber coating 87.5 mm bore, 1.0 & 1.2 mm thickness 23001-DM001 £210 23001-DM002 £210
CYLINDER HEAD STUD KIT Genuine ARP part ARP 2000 Pro Series, 35% increase in tensile strength over OE studs Kit includes 10-off head studs, 10-off parallel ground washers, 10-off 8740-Cr-Mo steel nuts, and assembly lubricant 207-4206 £154
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
ENGINE MECHANICAL 1 - 1 - 2
CYLINDER BLOCK MAIN STUD KIT Genuine ARP part ARP 2000 Pro Series, 50% increase in tensile strength over OE bolts Kit includes 10-off M10 main studs, 10-off M8 main studs, 20-off 8740-Cr-Mo steel nuts, and assembly lubricant 207-5403 £173
CONNECTING ROD BOLT SET Genuine ARP part ARP 2000 Pro Series, 25% increase in tensile strength over OE bolts Sold as set of 8 bolts
207-6002 £100
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
ENGINE LUBRICATION 1 - 2 - 1
ENGINE OIL FILTER Genuine MMC part Series par for spares / replacement
MZ690150 £20
ENGINE OIL COOLER Genuine MMC part Series part for spares / replacement
1240A056 £350
ENGINE OIL COOLER HOSE KIT MML Sports specification, made to AN aerospace standard Reliability upgrade, direct replacement for original hoses Available as steel-braid nitrile hose or lightweight fibre-braid teflon hose (200 grams lighter) GNX-12-01X (nitrile) £255 Supplied with installation diagram GNX-12-02X (teflon) £288
ENGINE OIL Genuine Mobil1 product 5W50 performance synthetic engine oil Suitable for all types of severe driving applications 6 litres required for engine fill 143642 (1 ltr) £16 143643 (4 ltr) £45
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
ENGINE FUEL SUPPLY 1 - 3 - 1
SAFETY FUEL TANK KIT Genuine ATL product Aramid fibre safety cell conforming to FIA/FT3.5-1999 standard 80 litre capacity, to be mounted underfloor instead of original tank Internal collector fitted with submerged fuel pump and sock filter Top plate fitted with JIC06 feed, return and vent adaptors and Staubli JIC12 refuelling plugs (fill and vent) 2-off integral float-type VDO fuel level sender units Supplied with underfloor cover Weight 6.86 kg (tank) + 2.88 kg (cover) EVO10/80-FT3.5 £6,500
FUEL PUMP COVER Fits over original fuel pump access hole in rear floor Removable lid Weight 300 g
EVO10/80FPCC £350
FUEL LINE KIT MML Sports specification, made to AN aerospace standard Includes feed & return hoses for engine bay (requires fuel injector rail modification to take AN fittings), bulkhead fittings, feed & return hoses through cockpit, fittings at fuel pump, high-pressure in-line filter, and tank ventilation hoses with terminating breather filter Allows fitment of q/d coupling for fuel sampling / draining (needs to be purchased separately); requires fitment of FIA approved roll-over valve (needs to be purchased separately) Supplied with installation diagram GNX-13-02X £720
FUEL DRAIN KIT MML Sports specification, made to AN aerospace standard Includes q/d coupling (plug and socket) with PVC drain hose (2m in length) Coupling is FIA approved for fuel sampling Fits directly into fuel line kit GNX-13-02X GNX-13-03X £203
FUEL ROLL-OVER VALVE Genuine ATL part FIA approved valve for use on tank ventilation line Compulsory as per FIA safety regulations Fits directly into fuel line kit GNX-13-02X FIAVV-SF £305
FUEL INJECTOR RAIL MOD Essential modification for installation of aviation type fuel lines JIC06 male fitting welded onto rail at feed end JIC06 male adaptor for return at fuel pressure regulator Original fuel rail to be supplied by customer Exchange 99-GRNRETURN £220 Without Exchange 99-GRNRAIL £290
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
ENGINE COOLING 1 - 4 - 1
THERMOSTAT Genuine RalliArt part Valve opening temperature 76 °C (standard value 76.5 ± 1.5 °C) 10% higher flow rate than OE thermostat
RA130548N1 £50
RADIATOR Genuine MMC part Standard Evo 10 radiator for spares / replacement VO homologated Outlander radiator (8 mm thicker and 5 mm taller) available for increased cooling efficiency 1350A050 (Evo 10) £280 (at 1.1 kg weight penalty) 1350A206 (Outlander) £280
RADIATOR HOSE KIT Genuine RalliArt part, VO homologated Silicon hoses with steel jubilee clips Reliability upgrade for heavy duty cooling requirements Direct replacement for original hoses Supplied as car-set RA137205S1 £255
RADIATOR SUPPORT BUSHING Genuine RalliArt part, strengthened rubber (HS80) Lower support bushes for radiator Original bushes to be used at top Sold in bags of 2 RA605173K1 £32
RADIATOR CAP Genuine RalliArt part Valve opening pressure 127 kPa (standard value 93 - 123 kPa) Direct replacement for original cap RA431454N1 (black) £28 RA431454N2 (red) £28
ENGINE COOLANT Genuine Comma product Premium traditional antifreeze, contains mono-ethylene-glycol Protection range (ambient) from -36 °C to +45 °C 2.25 ltr required for system fill (at 30% conc) SCA1L (1 ltr) £5 Available in cans of 1 and 2 litres SCA2L (2 ltr) £8
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
ENGINE INTAKE & EXHAUST 1 - 5 - 1
AIR SUCTION PIPE KIT Genuine RalliArt part, VO homologated Kit consists of cast aluminium intake pipe, 3-off silicone hoses with steel jubilee clips, and 1-off rubber o-ring To be used with Ø33 mm air intake restrictor Direct replacement for original part RA150132N1 £785
AIR FILTER Genuine ITG part representing ProFilter range Unique Tri-Foam® system with three layers of foam gives high level of filtration and exceptionally low pressure loss for increased engine power Fitment requires aluminium frame WB-394 (with frame) £70 Direct replacement for original part WB-394-E (filter only) £50
INTERCOOLER Genuine MMC part Series part for spares / replacement
1530A056 £255
TURBOCHARGER ASSEMBLY Genuine MMC part Series part for spares / replacement
1515A198 £1,140
Gp N TURBOCHARGER BUILD Turbocharger preparation by HKS Europe to FIA Group N regulations - Blueprint overhaul, inclusive of wheel balancing - Fitment of Ø33 mm air intake restrictor with lockwire for sealing Customer to supply base turbocharger 99-GRNTURBO £506
AIR INTAKE RESTRICTOR 33 mm Conforms to 2010 FIA Group N regulations and N5718 homologation Supplied with o-ring and drilled capheads
99-GRN33MM £195
TURBOCHARGER OIL DRAIN HOSE MML Sports specification Flexible aviation type hose clamped onto original drain pipe fitting Engine plug modified to take AN fitting Original drain pipe to be supplied by customer Included in Gp N Turbo Build package GNX-15-01X £95
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
ENGINE INTAKE & EXHAUST 1 - 5 - 2
TURBOCHARGER EXHAUST OUTLET GPN Fabricated part, direct replacement for OE casting Offers weight saving and increases high-RPM power Exact performance figures TBA Supplied with OE gasket and stud ME10EX#OTOINS £788
EXHAUST SYSTEM GPN System consists of Bolt Type Turbo Outlet incl heat sheild Down Pipe with Heat Sheild, Pipe #2, Pipe#3, Pipe #4 & Pipe#5 Tailpipe FIA approved catalytic converter is available for installation on tailpipe and is compulsory in Group N ME10EX#1D/PSINSA (Down Pipe with Heat Sheild) £308 ME10EX#2NOSIL (Pipe #2) £85 ME10EX#3 (Pipe #3) £76 ME10EX#4 (Pipe #4) £140 ME10EX#5 (Pipe #5 with CAT) £507 ME10EX#5NOSIL (Pipe #5 Plain) £90 FIT-GPN (Fitting Kit) £50
TURBOCHARGER EXHAUST OUTLET R4 Fabricated part, direct replacement for OE casting Offers weight saving and increases high-RPM power Slip Joint System Supplied with OE gasket and stud ME10EX#1RAINSA £788
EXHAUST SYSTEM R4 System consists of Slip Joint Turbo Outlet incl heat sheild Pipe #2, Pipe#3 and Pipe #4 Tailpipe FIA approved catalytic converter is available for installation on tailpipe and is compulsory in Group N EX1-R4 (Pipe #2) £122 EX2-R4 (Pipe #3) £171 EX5-R4 (Pipe #4 without CAT) £58 EX6-R4 (Pipe #4 with CAT) £507 FIT-R4 (Fitting Kit) £50
CATALYTIC CONVERTER Genuine HJS part DMSB homologation WRC.1279-10 Proved on Mitsubishi World Rally Cars with zero failure record
90950044 £475
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
ENGINE ELECTRICAL 1 - 6 - 1
ENGINE ECU (STANDARD ECU SUPPLIED BY CUSTOMER) Genuine MoTeC product, plug & play device M800 control unit with drive-by-wire, cam control and advanced functions (anti-lag and launch control) enabled; supplied with base map; free management software available from motec.com.au Requires MoTeC ACD controller 13013 £1,995
ENGINE ECU MAP Engine control map developed by MML Sports Available for various fuels, PWRC control fuel and higher grades Map is locked for viewing / editing Available for MoTeC engine ECU only GNX-16-01 (PWRC) £250 GNX-16-02 (fuel upgrade) £450
SPARK PLUG Genuine HKS part Super Fire Racing, XL type, heat 45 (NGK 9 equivalent) High performance iridium plug designed for improved ignition performance, durability and anti-carbon build-up Supplied individually 50003-M45-XL £22
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
CLUTCH 2 - 1 - 1
CLUTCH DISC Genuine RalliArt part Diameter Ø240 mm
RA567361K1 £285
CLUTCH COVER Genuine RalliArt part Diameter Ø240 mm Press load 12.2 kN
RA980846K1 £340
CLUTCH RELEASE BEARING Genuine MMC part
2317A001 £76
CLUTCH MASTER CYLINDER Genuine MMC part VO homologated for use on Evo X with suitable adaptor kit Cast aluminium part offers increased robustness over original plastic m/c Requires adaptor kit and feed pipe kit MR491945 (LHD) £205 MR519378 (RHD) £205
CLUTCH MASTER CYLINDER ADAPTOR KIT Conforms to VO homologation spec Allows upgrading clutch master cylinder to VO homologated option Consists of machined and anodised adaptor plate and rod end Supplied with mounting studs and rod end bolt with plastic bushing RA340167N1C £95
CLUTCH FEED PIPE KIT MML Sports spec, made to AN aerospace standard Feed pipe from clutch master cylinder to slave cylinder at gearbox For VO master cylinder option, banjo adaptor and bolt are supplied If original master cylinder is retained, adaptor for AN fitting is supplied OE m/c adaptor is also GNX-21-02X (LHD with VO m/c) £38 available individually GNX-21-03X (RHD with VO m/c) £42 Supplied with GNX-21-04X (LHD with OE m/c) £62 installation diagram GNX-21-05X (RHD with OE m/c) £68 GNX-21-06 (OE m/c adaptor only) £38
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
TRANSMISSION 2 - 2 - 1
GEAR BOX ASSEMBLY Genuine MMC part Series part for spares / replacement
2500A218 £5,950
DOG ENGAGEMENT GEAR KIT Genuine PPG product, fits into original casing VO homologated gear ratios The strengthened gear set includes upgraded billet selector forks and final drive with two ratio options SEQUENTIAL GEARKIT £12,250 GEARKIT £6,815
TRANSFER BOX ASSEMBLY Genuine MMC part Series part for spares / replacement
3200A087 £2,625
FRONT LSD KIT Genuine RalliArt part, VO homologated Mechanical type limited slip differential, fits into original transfer housing 40°/0° and 50°/0° ramp angles (accel/decel) available Overhaul to MML Sports settings RA857885S1 (LSD) £1,525 available as additional service GNX-22-05J (overhaul) £320
FRONT LSD BEARING SET Genuine RalliArt part Set consists of LH and RH bearings Required for front LSD assembly as original bearings can not be re-used Supplied as car-set RA317750S1 £105
FRONT LSD SPACER SET Genuine RalliArt part Each set consists of 28-off spacers in 0.53 - 1.34 mm thickness range Required for front LSD fitment into transfer box case LH and RH are different diameters and RA315850S1 (LH) £60 are sold separately RA314750S1 (RH) £60
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
TRANSMISSION 2 - 2 - 2
FRONT LSD COVER Replacement RalliArt front LSD cover (A)
RA857885C1 £380
FRONT LSD CROWN WHEEL BOLT Genuine RalliArt part 12-off required per car assembly Sold individually
RACZ4206K1 £3
TRANSFER BOX OVERHAUL KIT Genuine RalliArt part Kit consists of 2-off oil seals and 2-off o-rings 1-off kit required for front LSD fitment should original seals be damaged
RA315750S1 £45
FRONT OUTPUT SHAFT Genuine MMC part Series part for spares / replacement
3815A209 (LH) £60 3815A210 (RH) £60
FRONT DRIVE SHAFT ASSEMBLY Genuine MMC part Series part for spares / replacement
3815A207 (LH) £395 3815A208 (RH) £395
REAR DRIVE SHAFT ASSEMBLY Genuine MMC part Series part for spares / replacement
3715A133 (LH) £688 3715A134 (RH) £688
REAR DIFFERENTIAL ASSEMBLY Genuine MMC part Series part for spares / replacement
3501A130 £1,760
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
TRANSMISSION 2 - 2 - 3
REAR LSD KIT Genuine RalliArt part, VO homologated Mechanical type limited slip differential, fits into original housing 55°/35° and 55°/55° ramp angles (accel/decel) available Overhaul to MML Sports settings RA166619K1 £940 available as additional service GNX-22-06J (overhaul) £320
REAR LSD CROWN WHEEL BOLT Genuine MMC part 8-off required per car assembly Sold individually
MB092220 £2
REAR DIFFERENTIAL BEARING Genuine MMC part 2-off required for rear LSD assembly Supplied individually
MB393957 £40
REAR DIFFERENTIAL SPACER SET Genuine MMC part 1-off set required for rear LSD assembly Set consists of 6-off spacers
MR357058 £55
ACD HYDRAULIC PUMP Genuine MMC part Series part for spares / replacement
3520A046 £1,895
ACD HYDRAULIC LINE KIT MML Sports specification, made to AN aerospace standard Kit consists of three hoses (rear bumper, cockpit, engine bay), bulkhead fitting, and adaptors for hydraulic unit and clutch unit Hoses are to length and steel fittings are crimped Hoses are covered in abrasion and fire resistant sleeve Dry-break coupling is available for installation between engine bay and cockpit hoses for improved serviceability of vehicle Supplied with installation diagram GNX-22-01X (without Q/D) £330 GNX-22-02X (with Q/D) £620
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
TRANSMISSION 2 - 2 - 4
ACD HYDRAULIC CLUTCH Genuine MMC part Series part for spares / replacement
RA310050S1 £650
GEARBOX OIL Genuine Castrol product SAE 75W140 fully synthetic gear oil 2.5 ltr required for gearbox fill Supplied in 1 ltr cans (1 ltr) £18
DIFFERENTIAL OIL MMC approved product SAE 80W90 GL5 mineral gear oil 0.8 ltr required for transfer box fill, 0.6 ltr for rear differential Supplied in 1 ltr cans L-996 (1 ltr) £12
ACD HYDRAULIC FLUID Genuine Castrol product Dexron® III automatic transmission fluid Specified by manufacturer as suitable for hydraulic units 0.9 ltr required for system fill Supplied in 1 ltr cans (1 ltr) £12
ACD ECU Genuine GEMS product Bolt-in replacement for original control unit; supplied with base map; five selectable control modes (no lock, full lock, and three user-configurable); free management software available from gems.co.uk 99-ACDEVOX £1,185
ACD ECU Genuine MoTeC product, plug & play device Bolt-in replacement for original control unit; supplied with base map; six selectable control modes (no lock, full lock, and four user-configurable); free management software available from motec.com.au Supplied with CAN comms cable 14016 £898
ACD ECU MAP Active centre differential control map developed by MML Sports 3-mode map to suit different driving styles and conditions on gravel or tarmac roads; combination of the two is available upon request Available for both GEMS and GNX-22-03 (gravel) £200 MoTec control units GNX-22-04 (tarmac) £200
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
WHEELS 3 - 1 - 1
ALUMINIUM COMPETITION WHEELS Genuine SL Corse product, cast aluminium alloy Type 2118 7×15 ET28 for gravel Type 2120 8×18 ET12 for tarmac Please enquire about other sizes 2118 (gravel) £110 2120 (tarmac) £195
MAGNESIUM COMPETITION WHEELS Genuine SL Corse product, cast magnesium alloy Type 2020 7×15 for gravel, weight 8.6 kg (min Group N) Type 2021 8×18 for tarmac, weight 8.9 kg (min Group N) Please enquire about other sizes 2020 (gravel) £345 2021 (tarmac) £495
WHEEL STUDS Available as individual studs or complete car-set (20-off) M12×1.5, 63 mm long Sold individually
SS39 £2.20
WHEEL NUTS Available as individual nuts or complete car-set (20-off) M12×1.5, open ended 19 mm hex Sold individually BIM/D110/12X1.5N £2.20
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
SUSPENSION 3 - 2 - 1
ENGINE MOUNT Genuine RalliArt part, VO homologated Lightweight design, direct replacement for original part
RA033292S1 £784
GEARBOX MOUNT Genuine RalliArt part, VO homologated Lightweight design, direct replacement for original part
RA033722S1 £695
BOS DAMPER ASSEMBLY CR60 (gravel FR) £3,060 Shock absorber and spring assembly CR60 (gravel RR) £1,780 3-way adjustable monotube hydraulic CR50 (tarmac FR) £2,400 dampers, single piston, CAS system and CR50 (tarmac RR) £1,260 hydraulic bump stop (gravel only) Gravel car-set £9,680 Priced individually or per car-set Tarmac car-set £7,320
EXE-TC DAMPER ASSEMBLY NM08-1002 (gravel FR) £1,395 Shock absorber and spring assembly NM08-1003 (gravel RR) £2,090 4-way adjustable, double piston NM08-1004 (tarmac FR) £1,395 damping system NM08-1005 (tarmac RR) £2,090 Supplied with rear top mounts and Gravel car-set £6,970 set-up kit; priced individually or per car-set Tarmac car-set £6,970
REIGER DAMPER ASSEMBLY Shock absorber and spring assembly Double piston, rebound control (optional on tarmac), front corner control valve (tarmac only) Gravel car-set £8,945 Supplied with rear top mounts, camber Tarmac car-set £9,145 shims and C-spanners Tarmac car-set (w/rebound) £10,515
FRONT TOP MOUNT PLATE KIT Genuine RalliArt parts, VO homologated Set consists of LHS and RHS top mount plates Spherical bearing (ID 22.0 mm) Compatible with all Gp N dampers in use RA406134S1 (LH) £340 RA406134S2 (RH) £340
REAR TOP MOUNT PLATE KIT Universal part to fit to Evo X rear spring housing Spherical bearing (ID 20.0 mm) 2-off required for car build
RM08-965 (1-off) £125
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
SUSPENSION 3 - 2 - 2
REAR TOP MOUNT BUSHING Genuine RalliArt parts, strengthened rubber (HS80) Set consists of pair of upper and pair of lower bushes To be used with original rear top mounts Bushes sold in bags of 2 pieces RA554369K1 (upper) £26 RA554370K1 (lower) £26
FRONT LOWER ARM BUSHING Genuine RalliArt parts, strengthened rubber (HS80) Set consists of pair of front and pair of rear bushes Bushes sold in bags of 2 pieces RA554817K1 (front) £64 RA401121K1 (rear) £202
REAR UPPER AND TRAILING ARM BUSHING Genuine RalliArt parts, strengthened rubber (HS80) Set consists of pair of upper arm front, pair of upper arm rear and RA554817K1 (upper front) £64 pair of trailing arm front bushes RA411056K1 (upper rear) £210 Bushes sold in bags of 2 pieces RA411056K1 (trailing front) £210
ENGINE ROLL STOP BUSHING Genuine RalliArt parts, strengthened rubber (HS80) Set consists of front and rear bushes Bushes sold in bags of 1 piece RA184354K1 (front) £42 RA554855K1 (rear) £30
REAR DIFFERENTIAL MOUNT BUSHING Genuine RalliArt parts, strengthened rubber (HS80) Set consists of pair of front and single rear bush Front bush sold in bags of 2 pieces Rear bush sold in bags of 1 piece RA369384K1 (front) £36 RA351725K1 (rear) £38
FRONT ANTI ROLL BAR Genuine RalliArt part, VO homologated Direct replacement for original ARB (Ø25 mm) Available in Ø 23mm (gravel) and Ø27 mm (tarmac) sizes RA45612N23 (Ø23 mm) £405 RA45612N27 (Ø27 mm) £485
REAR ANTI ROLL BAR Genuine RalliArt part, VO homologated Direct replacement for original ARB (Ø23 mm) Available in Ø25 mm (gravel) and Ø27 mm (tarmac) sizes RA41562N25 (Ø25 mm) £775 RA41562N27 (Ø27 mm) £885
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
SUSPENSION 3 - 2 - 3
FRONT ANTI ROLL BAR BUSHING Genuine RalliArt parts, strengthened rubber (HS80) Pair of bushes to fit standard size anti roll bar (Ø 25 mm) Can be used in rear for Ø 25 mm ARB or modified for use on front/rear Ø 27 mm ARB Bushes sold in bags of 2 pieces RA554095K1 £68
REAR ANTI ROLL BAR BUSHING Genuine RalliArt parts, strengthened rubber (HS80) Pair of bushes to fit standard size anti roll bar (Ø 23 mm) Bushes sold in bags of 2 pieces
RA415633K1 £66
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
BRAKES 3 - 3 - 1
BRAKE MASTER CYLINDER Genuine MMC part, VO homologated Direct replacement for original master cylinder Supplied with fluid reservoir
4625A093 £265
BRAKE BOOSTER ADAPTOR Genuine RalliArt part, VO homologated To be fitted when original brake servo is removed Kit consists of adaptor and push-rod
RA033289S1 £360
BRAKE PROPORTIONING VALVE Genuine AP Racing part, VO homologated Mechanical brake pressure bias control valve Lever type with 7 positions
CP4550-1 £310
HAND BRAKE LEVER KIT Genuine RalliArt part, VO homologated Kit consists of lever and rod-end To be mounted on platform
RA626779N1 £955
HAND BRAKE MASTER CYLINDER Genuine Brembo part, VO homologated Tandem master cylinder to be used with hand brake lever kit Available in Ø16 mm, Ø17 mm, X.A7.B9.11 (Ø16 mm) £535 and Ø18 mm sizes X.A7.B9.12 (Ø17 mm) £535 X.A7.B9.13 (Ø18 mm) £535
HAND BRAKE MOUNTING PLATFORM MML Sports spec Fits onto floor tunnel and takes hand brake lever kit
GNX-35-02 (LHD) £50 GNX-35-03 (RHD) £50
FRONT BRAKE KIT Genuine Brembo part, VO homologated Kit consists of 4-piston caliper, caliper mounting bracket with bolts, Ø 300 mm (gravel) or Ø 355 mm (tarmac) disc and bell assy Supplied as axle-set XA7.G0.YY (gravel) £4,545 XA7.G0.XX (tarmac) £4,735
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
BRAKES 3 - 3 - 2
REAR BRAKE KIT Genuine Brembo part, VO homologated Kit consists of 4-piston caliper, Ø 295 disc and bell assy, bolt set For use on gravel or tarmac spec cars Supplied as axle-set XA7.G0.ZZ £3,200
BRAKE CALIPER Genuine Brembo part Replacement part for VO brake kit XA5.T0.03 (LHF) £1,795 Supplied individually XA5.T0.04 (RHF) £1,795 XA7.G0.11 (LHR) £1,055 XA7.G0.12 (RHR) £1,055
BRAKE DISC & BELL ASSY XA7.G0.21 (gravel LHF) £595 Genuine Brembo part XA7.G0.22 (gravel RHF) £595 Replacement part for VO brake kit XA7.G0.31 (tarmac LHF) £685 Supplied individually XA7.G0.32 (tarmac RHF) £685 XA7.G0.23 (gravel/tarmac LHR) £580 XA7.G0.24 (gravel/tarmac RHR) £580
BRAKE DISC 098.647.13 (gravel LHF) £255 Genuine Brembo part 098.647.23 (gravel RHF) £255 Replacement part for VO brake kit 099.306.31 (tarmac LHF) £355 Supplied individually 099.306.41 (tarmac RHF) £355 097.277.09 (gravel/tarmac LHR) £255 097.277.19 (gravel/tarmac RHR) £255
REAR BRAKE DISC COVER SET Genuine RalliArt part, VO homologated To be used with VO homologated Brembo rear brakes Supplied individually, 2-off needed for axle-set
RA480059N1 £130
FRONT BRAKE COOLING DUCT KIT Genuine RalliArt part, VO homologated Kit consists of 2-off composite air ducts to be fitted to front bumper and flexible Ø95 mm ducting to guide airflow into wheel arches Supplied with installation instructions RACZ4602S1 £560
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
BRAKES 3 - 3 - 3
BRAKE LINE KIT MML Sports specification, made to AN aerospace standard Kit consists of engine bay hoses, cockpit hoses, wheel arch hoses, bulkhead fittings, adaptors for valves / cylinders / calipers Hoses are covered in abrasion and fire resistant sleeve Hose fittings crimped to length Supplied with installation diagram
GNX-35-04X (LHD) £995 GNX-35-05X (RHD) £995
WHEEL ARCH BRAKE LINE KIT MML Sports specification, made to AN aerospace standard Kit consists of 4-off wheel arch hoses and 4-off banjo bolts for calipers Hoses are covered in abrasion and fire resistant sleeve Steel fittings crimped to length Included under the full brake line kit GNX-35-06X £245
BRAKE PADS Genuine Performance Friction product, 07 compound Designed for high grip and severe duty applications, good initial bite and average torque 7770.07.18.44 (gravel FR) £220 Very low abraded disc wear 7772.07.18.44 (tarmac FR) £235 Supplied as axle-set 7735.07.20.44 (gravel/tarmac RR) £95
BRAKE PADS Genuine Carbone Lorraine product RC8 compound in front offers very high and stable friction level RC6 in rear allows brake bias 5036W50T17-RC8 (gravel FR) £165 Very good initial bite 5011W61T17-RC8 (tarmac FR) £185 Supplied as axle-set 5006W43T20-RC6 (gravel/tarmac RR) £145
BRAKE PADS Genuine Endless product, N35S compound Offers good compromise between initial bite and brake power Well balanced in both wet and dry RCP108N35S (gravel FR) £354 Exceptionally low disc wear RCP109N35S (tarmac FR) £392 Supplied as axle-set RCP001N35S (gravel/tarmac RR) £317
BRAKE FLUID Genuine Brembo product, LCF600 fluid Exceeds DOT4 specification Offers low compressibility at high temperatures Supplied as 0.5 litre can 2-off cans required for system fill and bleed 04.8164.11 £21
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
STEERING 3 - 4 - 1
PAS HOSE KIT MML Sports specification, made to AN aerospace standard Kit consists of HP feed and LP return hoses, adaptors for pump and rack RHD kit available with titanium Q/D GNX-37-01X (LHD) £80 coupling on HP hose for serviceability GNX-37-02X (RHD) £60 Supplied with installation diagram GNX-37-03X (RHD Q/D) £645
STEERING WHEEL Genuine SPARCO part 3 spokes, 6-off bolts and horn button included, available in black metal finish or carbon, suede cover, diameter Ø330 mm, depth 39 mm (metal) or 30 mm (carbon) 015R383PSN (metal) £150 015RC385SN (carbon) £555
STEERING WHEEL HUB ADAPTOR Genuine OMP part Takes all traditional 6-bolt steering wheels and spacers Allows wiring of horn button in centre of steering wheel Includes 6-off bolts, horn button extension leads and dummy resistor to replace air bag OD/1960/MI280A £65
STEERING WHEEL HUB SPACER Genuine SPARCO part 50 mm spacer, suits all traditional 6-bolt 01595BLK (black) £65 steering wheels and hub adaptors 01595B (blue) £65 Available in black, blue, red, or silver 01595R (red) £65 Anodised finish 01595N (silver) £65
STEERING RACK ASSEMBLY Genuine MMC part Series part for spares / replacement
4410A192 (LHD) £764 (RHD) £764
PAS OIL PUMP ASSEMBLY Genuine MMC part Series part for spares / replacement
4450A097 £530
PAS FLUID Genuine Castrol product ATF Dexron III Approximately 1 litre required for system fill Supplied as 1 litre can CastrATFDexIII £14
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
BODYSHELL 4 - 1 - 1
ROLL CAGE Genuine KBT product, certified by SBF (Swedish ASN) Supplied as weld-in kit Supplied with original ASN certificate
RC-EVO10 £1,780
BIW BEAD BLAST Process allows removal of original paint and coating to expose bare bodyshell for enhanced shell preparation Separate panel blasting is also required if colour code is changed from base car BBL-SHL (shell) £720 BBL-PNL (panels) £240
Gp N BODY PREPARATION Bodyshell preparation to FIA Group N regulations; requires body to be de-sealed and bead blasted (not included); includes de-bracketing to VO homologation, fitment of roll cage (cage not included), seat rails and harness bosses, various bosses and studs for car build, various mounting brackets and blanking discs, and axle stands GNX-42-01J £6,200
PAINT WORK Capability ranges from singe colour to complex colour scheme Separate panel paint work is required if colour code is changed from base car PNT-MONO (single colour) £1,800 PNT-MULTI (colour scheme) £2,400 PNT-PNL (panels) £900
WINDSCREEN Genuine MMC part Series part for spares / replacement
6102A494 (LHD) £155 6102A486 (RHD) £155
REAR GLASS Genuine MMC part Series part for spares / replacement
6131A089 £205
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
GUARDS 4 - 2 - 1
ALI SUMP GUARD 6mm or 8mm Suitable for rough gravel rallies or Safari Supplied with top hat bushes for crossmember & front mounting Note: Front Splitter Sold Seperately
GNX-44-50X £1,286
COMPOSITE SUMP GUARD SPLITTER Kevlar construction Fits directly to front ali guard
GNX-44-70 £480
COMPOSITE SUMP GUARD Carbon and/or Kevlar construction Fits directly to front chassis crossmember (radiator mount panel) and front suspension crossmember Available in tarmac and gravel spec GNX-44-81 £655
SUMP GUARD MOUNTING KIT 2 x Mounting plates with top hat tubes 2 x Replaceable threaded mounting bushes 2 x Top hat bushes for front cross member GNX-44-90 - ALI GUARD £275 GNX-44-91 - COMP GUARD £275
UNDERFLOOR GUARDS Twintex underfloor protection Material thickness 3 - 4 mm Total weight (of pair) 14.0 kg 0810121T (LH) £377 0810122T (RH) £377
FRONT SILL GUARDS Aramid fibre sill protection, front part Material thickness 3 - 4 mm Outer layer painted black 0810137A (LH) £160 0810138A (RH) £160
REAR SILL GUARDS Aramid fibre sill protection, rear part Material thickness 2 - 4 mm Outer layer painted black 0810139A (LH) £237 0810140A (RH) £237
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
GUARDS 4 - 2 - 2
FUEL TANK GUARDS Twintex protection for ATL safety fuel cell Material thickness 3 - 4 mm Total weight (of pair) 3.1 kg 0810177T (LH) £140 0810178T (RH) £140
HYDRAULIC PUMP GUARD Twintex protection for ACD hydraulic unit Material thickness 2 mm Weight 0.3 kg
0810174T £187
FRONT WHEEL ARCH LINERS Protection for front wheel arches Material thickness 1.2 mm Openings for front brake cooling 0810184T (LH) £168 0810185T (RH) £168
REAR WHEEL ARCH LINERS Protection for rear wheel arches Material thickness 1.2 mm
0810186T (LH) £105 0810187T (RH) £105
REAR BUMPER GUARDS Twintex protection for rear wheel arches and bumper Material thickness 2 mm Total weight (of pair) 1.0 kg 0810175T (LH) £154 0810176T (RH) £154
REAR SUSPENSION GUARDS Thermoplastic protection for rear suspension links Material thickness 5 mm Quick release fastener around rear lower arm GNX-44-10X (LH) £145 GNX-44-11X (RH) £145
MUD FLAPS Genuine Kay-Dee product Moulded flaps resistant to both high impact and abrasion Available in wide range of colours Supplied as car-set KAY-E10 £220
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
GUARDS 4 - 2 - 3
PROPELLER SHAFT GUARD Available in two versions, (a) aluminium RalliArt guard (2.1 kg) (b) twintex construction (1.1 kg) Supplied with fitting kit RACZ4408R1 (aluminium) £185 RACZ4408R1CARA (twintex) £245
REAR DIFFERENTIAL GUARD Available in two versions, (a) aluminium RalliArt guard (1.3 kg) (b) twintex construction (0.7 kg) Supplied with fitting kit RACT9404R1 (aluminium) £135 RACT9404R1CARA (twintex) £235
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
EXTERIOR 5 - 1 - 1
ROOF VENT VO homologated Made of carbon fibre Kit consists of exterior and interior parts, 2-off sock filters and drain tube GNX-51-01X £896
DOOR MIRRORS Made of carbon fibre, improves aesthetics and reduces excrescence drag increment 0810172C (mirror LH) £209 Supplied with mirror glass glued in 0810173C (mirror RH) £209 place (replacement glass also 0810135A (glass LH) £6 available separately) 0810136A (glass RH) £6
REAR WINDOW VENTS Made of carbon fibre with high quality foam filter on inside Affixes against window edge with strong carbon channel Sold individually, 2'off required per car
0810165C £88
BONNET PINS Traditional solution for bonnet and boot latching Available in steel or silver-anodised aluminium 2-off sets needed for car build C01 (steel kit, set of 2) £15 C01S (aluminium kit, set of 2) £20
NUMBER PLATES Full-size number plate sticker for rear Small-size number plate sticker for front GNX-51-02 (rear) £15 Full-size laminated number plate GNX-51-03 (front small) £8 on Foamex board for front GNX-51-04 (front standard) £23 Available individually or as car-set Complete car-set £40
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
INTERIOR 5 - 2 - 1
DRIVER'S FOOTWELL Made of carbon fibre, weighs only 680 grams
0810170C (LHD) £368 0810189C (RHD) £368
CO-DRIVER'S FOOTWELL Made of carbon fibre, weighs only 960 grams Provides mounting for hand-held fire extinguisher bottle (supplied with metal straps) 0810171C (LHD) £412 0810190C (RHD) £412
FLOOR CONSOLE COVER Made of carbon fibre, weighs only 340 grams Slides over gear lever and provides aesthetical finish for floor console which is free to remove under Group N regulations; recessed aperture takes switch panel of MML Sports auxiliary loom (see page 5-3-1) 0810188C £357
RADIO BLANKING PANEL Made of carbon fibre, weighs only 45 grams Provides aesthetical finish for instrument panel when original trim and instruments are removed
0810159C £68
DASHBOARD SCREEN MOUNTING PANEL Made of carbon fibre, weighs only 60 grams Designed to provide mounting for MoTeC SDL dashboard screen Fits into original radio / sat nav aperture of instrument panel
0810183C £209
TRIP METER MOUNTING BRACKET Made of carbon fibre, weighs only 120 grams Designed to provide mounting for Coralba C-Giant trip meter Fits onto instrument panel over original passenger's air bag cover Currently available for LHD only 0810182C (LHD) £185
NUT GUN MOUNTING BRACKET Made of carbon fibre Designed for Makita impact wrench Can be mounted on flat surface or onto rollcage Supplied with quick release strap 9900111C £140
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
INTERIOR 5 - 2 - 2
FRONT DOOR CARDS Made of carbon-fibre Average material thickness 1.5 mm Total weight (of pair) 2.1 kg Takes OE door handle and window switches 0810144C (LH) £439 0810145C (RH) £439
REAR DOOR CARDS Made of carbon-fibre Average material thickness 1.5 mm Total weight (of pair) 1.7 kg Takes OE door handle 0810146C (LH) £420 0810147C (RH) £420
MIRROR MOUNT COVERS Made of carbon-fibre Provides aesthetical interior finish
0810148C (LH) £27 0810149C (RH) £27
DASHBOARD FLOCKING Top roll of instrument panel flocked in black to eliminate light reflection Customer to supply IP Other colours available on request
GNX-52-01J £140
BATTERY OPERATED IMPACT WRENCH KIT Genuine Hitachi product 14.4V cordless impact wrench to be used as wheel nut gun Supplied with genuine 2-off Li-ion batteries and charger Anodised Cr-Mo socket supplied separately WR14DL £290 SX03019 (19 mm socket) £15
WHEEL BRACE Lightweight wheel brace with spin handle and 19 mm socket TIG welded, black powder coated Supplied with mounting bracket
WB19MM £55
HYDRAULIC SCISSOR JACK Genuine KYB product Total weight (jack and handle) 5.5 kg Lifting height 117 - 380 mm Capacity 800 kg KJZ008 £210
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
INTERIOR 5 - 2 - 3
MECHANICAL MONKEY ON STICK JACK Adopted from OEM product, lightweight design Supplied with pin to required diameter and foot bar to required height Good cost compromise when low minimum lifting height is required
GNX-52-02X £165
HYDRAULIC MONKEY ON STICK JACK Exceptionally strong design, offers very quick lifting action and almost instantaneous release, alloy foot plate with roll feature, supplied with pin 23mm dia Can lift vehicle from virtually zero height Total weight (jack and handle) 3.8 kg AIT-LIFT09 £730
SPARE WHEEL STRAP Genuine TRS product 3-point attachment to body, adjustable strap length Fitted with ratchet and flat hook
MA620-0001 £22
FIBREGLASS COMPETITION SEAT Genuine Sparco product 00824F (Corsa) £341 Fibreglass shell 00807F (Evo) £341 High / wide options available 00808F (Pro 2000) £350 NR black, AZ blue, RS red 00806F (Circuit) £411 Priced per seat 00809F (Pro-ADV) £411
CARBON COMPETITION SEAT Genuine Sparco product 00807Z (Evo) £1,200 Carbon fibre shell 00808Z (Pro 2000) £1,200 Up to 3 kg weight saving per seat 00806Z (Circuit) £1,395 NR black, AZ blue, RS red 00810Z (S-Light) £1,300 Priced per seat 00809Z (Pro-ADV) £1,395
COMPETITION SEAT MOUNTS Genuine Sparco product, FIA approved Lightweight design, alloy construction Fits Sparco, OMP, Cobra and Corbeau seats Supplied as pair 00499AL £75
COMPETITION SEAT MOUNTS Genuine Sparco product, FIA approved Lightweight design, alloy construction Universal fit Supplied as pair 00489PRO £170
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
INTERIOR 5 - 2 - 4
COMPETITION HARNESSES Genuine Sparco product, FIA approved, 6-point attachment to body, quick release buckle, lightweight adjusters, available as 2" straps all over (base) or with 1" straps (single or 04827BM (base) £175 double) for HANS device 04817RH (HANS single belt) £175 NR black, AZ blue, RS red 04827TW (HANS double belt) £260
ROLL CAGE PADDING Genuine Sparco product, FIA approved Mandatory where crash helmets can come into contact with roll cage Sold in sets of 2 pcs, each 500 mm long 0076040 (Ø40 mm) £35 0076045 (Ø45 mm) £35 0076050 (Ø50 mm) £35
HAND HELD FIRE EXTINGUISHER Genuine Spa Design product 2.4 litre bottle available in metal or carbon fibre Supplied with 2-off metal straps and 1-off mounting bracket HH240 (metal) £65 HH240CF (carbon) £650
FIRST AID KIT 15 item basic kit Includes antiseptic cleansing tissues and cream, scissors, woven bandage, safety pins, various dressings and first aid primary care guide Weighs 180 grams Supplied in pouch 1040 £18
EMERGENCY HARNESS CUTTER Signal-red, fixed-blade emergency seat belt cutter Supplied with Velcro fastener for convenient attachment 2-off mandatory per car under FIA safety regulations Price per 1-off 537 £10
EMERGENCY WARNING TRIANGLE To European Standard ECE R27 Manufactured from ABS plastic, folding design with stand and rubber feet; supplied in plastic carrying case Price per 1-off WT1 £14
GLASS ANTI-SHATTER FILM Genuine Foliatec product High strength protective window film offering glass splinter protection Mandatory on side windows under FIA safety regulations Supplied as 51×400 cm sheet (enough for one car build) 1164 £75
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
CHASSIS ELECTRICAL 5 - 3 - 1
AUXILIARY LOOM KIT MML Sports specification, fully legal in Group N, plug&play type - battery cables with isolator (battery not included) - ignition key interface for switch-operated function - CAN bus link from ACD controller (to fit MoTeC MDC2) - floor console switch panel with power / ignition / start switches, six circuit breakers, and fire extinguisher power pack (fits into carbon floor console cover 0810188C which needs to be purchased separately) - external kill / fire switches for mounting on scuttle panel - ACD and ALS mode toggle switches for mounting on floor console - connector for electrical fire extinguisher (to fit Lifeline fire bottle) - fuel pump and fuel level interface (to fit ATL safety fuel cell) - connector for shift light (to fit MoTeC SLM) - connector for dashboard screen (to fit MoTeC SDL3) with auxiliary socket and two external switches for mounting on floor console - USB socket for PC communication to MoTeC engine ECU and ACD controller via CAN link (MoTeC UTC converter not included) - Ethernet socket for PC communication to MoTeC SDL3 screen - radio interface loom for wheel speed input - trip meter interface loom (to fit Coralba C-Giant) - connector for map light (map light not included) - two foot switches and wiring to co-driver's footrest for trip meter reset and windscreen wash/wipe - wiring to hydraulic handbrake switch for ACD controller input - bulkhead connectors for auxiliary light looms (bonnet pod, corner pods and their extension looms need to be purchased separately) - two auxiliary connectors at floor console All auxiliary devices are optional, their absence does not affect functionality of the loom; loom is designed to work with the particular devices as specified above, please enquire if intending to use different spec; LHD/RHD versions available; ACD controller comms cable, fire extinguisher power pack and OE intercooler water spray switch to be supplied by customer Supplied with installation instructions 5395 £3,950 5395R4 £4,250
GEL BATTERY Genuine Red Top 40 from Varley Voltage 12 V, capacity 35 Ah, weight 14.6 kg, dimensions 250×97×202 mm Exceptionally high cranking power, high shock and vibration resistance, maintenance free, sealed construction, no electrolyte leakage Reliability proved in WRC, WTCC, NASCAR, etc 7065-0007 £205
ELECTRICAL FIRE EXTINGUISHER KIT Genuine 3 kg Zero 360 remote charge piston system from Lifeline FIA homologated, light and compact, two year service life Kit includes cylinder with bracket and straps, remote cartridge with link hose, power pack, waterproof activation switches with aluminium bezels, standard plug and lead assembly, semi-rigid tube with heat protective overbraid, connectors and fittings, nozzles, and decal pack Supplied as complete kit
104-225-003 £1,100
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
CHASSIS ELECTRICAL 5 - 3 - 2
DASHBOARD SCREEN Genuine MoTeC product, all-in-one display, logger and controller Customisable screen layout, measurement units and warnings User-defined alarms, programmable overrides 18017 (base) £1,645 Options include backlight and logging 18018 (backlit) £1,865 Free management software 29414 (16MB logging) £980
SHIFT LIGHT MODULE Genuine MoTeC product Array of eight full colour (RGB) LED's, can be used as shift lights, warning lights or other indicators as programmed by user Configured and controlled from MoTeC ECU, display or data logger Communicates over CAN link 18120 £275
TRIP METER Genuine Coralba product C-Giant incorporates three independent very precise distance meters, two time registers, speed display function, and automatic SS measurement Supplied with CAN converter for wheel speed input from radio signal Requires 12 V power, weighs 370 grams C900 £875
MAP LIGHT Genuine Grayston product Flexible body, 457 mm (18 in) length, cone shaped hood over light, integral push on/off switch; other spec available on request Supplied with unterminated wires and screws for installation GE46 £35
INTERCOM Genuine Stilo product, the ultimate intercom system Two separate circuits (high volume / noise cancelling) with radio, mobile phone and camera connection ST-30 £830 Power/camera/mic and helmet wiring Power loom £185 looms available separately Helmet loom £105
BONNET LIGHT POD Genuine PIAA product, 2-off drive lamps and 2-off spot lamps Supplied with PIAA 80 Series Competition lamps and mounting rings Halogen and HID options available PLP1010WL (halogen) £650 Halogen bulbs and extension PLP1010HID (HID lamps) £2,195 loom to be purchased separately 5395-06 (extension loom) £205
HALOGEN LIGHT BULB Genuine PIAA product H4 platinum competition bulb, unique gas mix and glass tube colour enable equivalent output of 150 watts on dip and main beam while only drawing 80/80 watts Supplied individually H89 (single) £45
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
R4 KIT 6 - 1 - 1
LANCER EVOLUTION X R4 KIT
Front suspension - subframe, lower arm assembly, ARB links, damper top mounts - gearbox mount bracket, centre-member reinforcement panel Rear suspension - subframe, upper arm assembly, camber rod assembly, toe rod assembly, longitudinal rod assembly, ARB links, damper top mounts Side impact protection kit (compulsory in FIA R4 category) - door side impact absorbing foam, composite door cards - polycarbonate side windows Body - front bumper support bar - polycarbonate rear window Interior - composite dashboard - heater
Dampers, steering knuckles, anti-roll bars are NOT supplied with the kit
Modifications to be done by OWN means - spring housing modification front/rear - side door panel modification - bonnet and boot lid panel modification - dashboard bracket removal R4 KIT £20,500
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
R4 SUSPENSION FRONT 6 - 2 - 1
FRONT SUBFRAME R4 spec tubular steel crossmember Fits to standard mounting points on body and takes original steering rack Weighs 9.3 kg, saving 4.7 kg over the standard subframe Requires use of R4 spec suspension arms CE114-110 £2,887
FRONT ARM ASSEMBLY R4 spec front suspension arm Left-hand and right-hand parts sold separately Fasteners not included CE114-105 (LH) £1,190 CE114-108 (RH) £1,190
FRONT TOP MOUNT R4 spec front damper top mounts Requires customer to modify front turrets Left-hand and right-hand parts sold separately CE114-104 (LH) £385 CE114-107 (RH) £385
FRONT ANTI-ROLL BAR LINK R4 spec front ARB link Connects standard ARB to R4 spec suspension arm bracket 2'off required per car
CE114-109 £315
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
R4 SUSPENSION REAR 6 - 2 - 2
REAR SUBFRAME R4 spec tubular steel crossmember Fits to standard mounting points on body and takes original rear differential Weighs 10.6 kg, saving 8.5 kg over the standard subframe Requires use of R4 spec suspension arms CE114-119 £2,887
REAR UPPER ARM R4 spec rear suspension arm Left-hand and right-hand parts sold separately Fasteners not included CE114-231 (LH) £945 CE114-230 (RH) £945
REAR LONGITUDINAL ARM R4 spec rear suspension arm Left-hand and right-hand parts sold separately Fasteners not included CE114-113 (LH) £529 CE114-117 (RH) £529
REAR CAMBER ARM R4 spec rear suspension arm 2'off required per car Fasteners not included
CE114-115 £344
REAR TOE ARM R4 spec rear suspension arm 2'off required per car Fasteners not included
CE114-112 £450
REAR ANTI-ROLL BAR LINK R4 spec rear ARB link Connects standard ARB to R4 spec suspension arm bracket 2'off required per car
CE114-204 £315
REAR TOP MOUNT R4 spec rear damper top mounts Fits to original rear turrets 2'off required per car
CE114-227 £364
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
R4 SUSPENSION BEARINGS 6 - 2 - 3
ROD END BEARING Rodobal RM..XE series rod end bearings RM22XECO: front arm rear (2 per car), rear trailing arm front (2 per car)
RM22XECO £67
ROD END BEARING Rodobal RM..MTE series rod end bearings RM16MTEX1.5: rear camber rod (2 per car), rear toe rod (2 per car) RML16MTEX1.5: rear camber rod (2 per car), rear toe rod (2 per car) RM16MTEX1.5 £65 RML16MTEX1.5 £65
SPHERICAL BEARING Rodobal RG..MTE series spherical bearings RG14MTE.29: rear upper arm (6 per car), rear trailing arm rear (2 per car) RG18MTE.35: front arm inner (2 per car), rear top mount (2 per car) RG14MTE.29 £22 RG18MTE.35 £34
SPHERICAL BEARING Rodobal RG..SE series spherical bearing RG22SE.CO: front top mount (2 per car)
RG22SE.CO £26
ROD END BEARING Aurora HXAM-T series rod end bearings HXAM-7T: rear anti-roll bar link (2 per car) HXAB-7T: rear anti-roll bar link (2 per car) HXAM-7T £68 HXAB-7T £68
SPHERICAL BEARING Aurora HAB-T series spherical bearings HAB-7TG: front anti-roll bar link (4 per car) HAB-14T: front arm outer (2 per car) HAB-7TG £35 HAB-14T £96
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
R4 BODY AND INTERIOR 6 - 3 - 1
COMPOSITE DASHBOARD R4 spec glass fibre dashboard Weight 4.0 kg, flocked top, integrated heater ducting Currently available in LHD version only
CE114-145 £687
HEATER ASSEMBLY R4 spec windscreen heater 3-speed centrifugal blower, can be connected into standard heater loop Supplied with 4-way electrical switch Ducting to dashboard not included CE114-147 £250
HEATED WINDSCREEN R4 spec heated windscreen Direct replacement for original screen Available in LHD and RHD versions CE114-148 (LHD) £470 CE114-XXX (RHD) £470
POLYCARBONATE WINDOW KIT R4 spec polycarbonate side door and rear window kit To be used with side impact protection kit
CE114-151KIT £980
SIDE IMPACT PROTECTION KIT R4 spec side impact protection foam Arpro and glass fibre door cards Compulsory in FIA R4 category Requires customer to modify side door inner panels and remove side window regulators
CE114-122KIT (LHF) £875 CE114-127KIT (RHF) £875 CE114-132KIT (LHR) £875 CE114-138KIT (RHR) £875
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
INDEX 9 - 1 - 1
A Fire extinguisher, electrical 5-3-1 N ACD hydraulic lines 2-2-3 Fire extinguisher, hand held 5-2-4 Number plates 5-1-1 Air intake filter 1-5-1 First aid kit 5-2-4 Air intake pipe 1-5-1 Flocking, dashboard 5-2-2 O Anti roll bar, front 3-2-2 Fluid, ACD hydraulic 2-2-4 Oil cooler hoses, engine 1-2-1 Anti roll bar, rear 3-2-2 Fluid, steering rack 3-4-1 Oil cooler, engine 1-2-1 Footwell, co-driver 5-2-1 Oil filter, engine 1-2-1 B Footwell, driver 5-2-1 Oil, differential 2-2-4 Base car 0-3-1 Fuel lines 1-3-1 Oil, engine 1-2-1 Battery, gel 5-3-1 Fuel pump cover 1-3-1 Oil, gearbox 2-2-4 Bead blast, bodyshell 4-1-1 Fuel tank 1-3-1 Output shaft, front 2-2-2 Blanking panel, IP radio 5-2-1 Bodyshell preparation 4-1-1 G P Bonnet pints 5-1-1 Gear box assembly 2-2-1 Paint work, bodyshell 4-1-1 Bracket, dashboard screen 5-2-1 Glass, rear 4-1-1 Bracket, nut gun 5-2-1 Guard, propeller shaft 4-2-3 R Bracket, trip meter 5-2-1 Guard, rear differential 4-2-3 R4 body and interior 6-3-1 Brake bell 3-3-2 Guards, fuel tank 4-2-1 R4 kit, complete 6-1-1 Brake booster adaptor 3-3-1 Guards, hydraulic pump 4-2-2 R4 suspension, bearings 6-2-3 Brake caliper 3-3-2 Guards, rear bumper 4-2-2 R4 suspension, front 6-2-1 Brake cooling ducts, front 3-3-2 Guards, rear suspension 4-2-2 R4 suspension, rear 6-2-2 Brake disc 3-3-2 Guards, sill 4-2-1 Radiator cap, engine 1-4-1 Brake disc cover, rear 3-3-2 Guards, sump 4-2-1 Radiator hoses, engine 1-4-1 Brake fluid 3-3-3 Guards, underfloor 4-2-1 Radiator, engine 1-4-1 Brake kit, front 3-3-1 Restrictor, air intake 1-5-2 Brake kit, rear 3-3-2 H Roll cage 4-1-1 Brake lines 3-3-3 Hand brake lever 3-3-1 Roll cage padding 5-2-4 Brake master cylinder 3-3-1 Hand brake master cylinder 3-3-1 Roof vent 5-1-1 Brake pads 3-3-3 Hand brake platform 3-3-1 Brake proportioning valve 3-3-1 Harness cutter 5-2-4 S Bushing, engine roll stop 3-2-2 Harnesses, seat 5-2-4 Screen, dashboard 5-3-2 Bushing, front anti roll bar 3-2-3 Head gasket, engine 1-1-1 Seat mounts 5-2-3 Bushing, front lower arm 3-2-2 Head studs, engine 1-1-1 Seats 5-2-3 Bushing, rear anti roll bar 3-2-3 Homologation document 0-3-1 Shift light 5-3-2 Bushing, rear differential 3-2-2 Hydraulic clutch, ACD 2-2-4 Spare wheel strap 5-2-3 Bushing, rear top mount 3-2-2 Hydraulic pump, ACD 2-2-3 Spark plug 1-6-1 Bushing, rear trailing arm 3-2-2 Splitter, front bumper 4-2-1 Bushing, rear upper arm 3-2-2 I Steering rack assembly 3-4-1 Impact wrench, battery 5-2-2 Steering rack hoses 3-4-1 C Intercom 5-3-2 Steering rack oil pump 3-4-1 Catalytic converter 1-5-2 Intercooler, air intake 1-5-1 Steering wheel 3-4-1 Clutch cover 2-1-1 Steering wheel adaptor 3-4-1 Clutch disc 2-1-1 J Steering wheel spacer 3-4-1 Clutch feed pipe 2-1-1 Jack, hydraulic scissor 5-2-2 Sump guard 4-2-1 Clutch m/c adaptor 2-1-1 Jack, hydraulic stick 5-2-3 Clutch master cylinder 2-1-1 Jack, mechanical stick 5-2-3 T Con rod bolts, engine 1-1-2 Thermostat 1-4-1 Connecting rods 1-1-1 L Top mount, front 3-2-1 Console cover, floor 5-2-1 Light bulb, halogen 5-3-2 Top mount, rear 3-2-1 Coolant, engine 1-4-1 Light pod, bonnet 5-3-2 Transfer box assembly 2-2-1 Liners, front wheel arch 4-2-2 Transfer box overhaul kit 2-2-2 D Liners, rear wheel arch 4-2-2 Transfer shaft, centre diff 2-2-1 Damper assembly 3-2-1 Loom, auxiliary 5-3-1 Trip meter 5-3-2 Differential assy, rear 2-2-3 Loom, bonnet light pod 5-3-2 Turbocharger 1-5-1 Dog gear kit 2-2-1 LSD bearing, front 2-2-2 Turbocharger build 1-5-1 Door card, front 5-2-2 LSD bearing, rear 2-2-3 Turbocharger drain hose 1-5-1 Door card, rear 5-2-2 LSD cover, front 2-2-2 Turbocharger exhaust outlet 1-5-1 Drive shaft, front 2-2-2 LSD crown bolt, front 2-2-2 Drive shaft, rear 2-2-2 LSD spacer, front 2-2-1 W LSD spacer, rear 2-2-3 Warning triangle 5-2-4 E LSD, front 2-2-1 Wheel brace 5-2-2 ECU map, ACD 2-2-4 LSD, rear 2-2-3 Wheel nuts 3-1-1 ECU map, engine 1-6-1 Wheel studs 3-1-1 ECU, ACD 2-2-4 M Wheels 3-1-1 ECU, engine 1-6-1 Main studs, engine 1-1-2 Window vents, rear 5-1-1 Engine assembly 1-1-1 Map light 5-3-2 Windscreen 4-1-1 Engine build 1-1-1 Mirror cover, interior mount 5-2-2 Exhaust system 1-5-2 Mirrors, door 5-1-1 Mount, engine 3-2-1 F Mount, transmission 3-2-1 Film, glass anti-shatter 5-2-4 Mud flaps 4-2-2
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
NOTES 9 - 2 - 1
+44 (0) 1327 702975 [email protected] MITSUBISHI Lancer Evo X Group N and R4 MML Sports Price List Jan 17
NOTES 9 - 2 - 2
+44 (0) 1327 702975 [email protected]