DOCSLIB.ORG

C300 Abbreviated Instruction

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
C300 Abbreviated Instruction English C300 Abbreviated instruction • To see details of specifications and operations, refer to the instruction manual: C300 instruction manual Component identification Setting the calendar The calendar of this watch does not have to be adjusted manually until Thursday, UTC hour hand UTC minute hand December 31, 2099 including leap years. (perpetual calendar) • Press and hold button B for 2 seconds or more to move the hour and minute Minute hand hands to 12 o'clock position temporarily to see the digital display without their MHP Button B 9:00 1:10 interruption. Press the button again to return them to normal movement. 8:00 Button A 1:20 22 24 2 M 20 4 1. Press and release the lower right button repeatedly to 7:00 1:30 Hour hand 18 6 16 UTC 8 move the mode hand to point to [CAL]. 14 1:40 12 10 24 6:00 20 4 The calendar is indicated on the digital display. PM AM 1:50 16 8 12 0 24-hour hand PM 2:0 A TME CAL 2. Press and release the upper right button or lower left 5:00 SET TM Digital display H.R. R AL-1 4:30 UP button C repeatedly to indicate an area name you want on CHR MODE DOWN AL-2 2:30 00 : AL-3 4 Button M 0 :3 3 the digital display. 0 0 Button C 3: Mode hand 3. Pull out the lower right button M. The calendar indication on the digital display starts blinking and the calendar becomes adjustable. • Actual appearance may differ from the illustration. 4. Press and release the upper right button A repeatedly to • Refer also to our web page for detail of usage of the scale and bezel on the watch. change the target to be set. (http://www.citizenwatch-global.com/support/pdf/enhanced/e.pdf) • Each time you press the button, the target changes as follows: Setting the time • The time indicated with the hour, 24- hour and minute hands and UTC hour/ minute hands is synchronized with that on the digital display. • Press and hold button B for 2 seconds or more to move the hour and minute hands to 12 o'clock position temporarily to see the digital display without their Month Date Year interruption. Press the button again to return them to normal movement. C 1. Press and release the lower right button M repeatedly to 5. Press and release the lower left button to adjust the target. move the mode hand to point to [TME]. • Pressing and holding the button changes indication continuously. 6. Repeat steps 4 and 5 to set other targets. Press and release the upper right button A or lower left 2. M button C repeatedly to indicate an area name you want on 7. Push in the lower right button to finish the procedure. the digital display. • The day of week is set automatically. 3. Pull out the lower right button M. Switching the time of analog and digital sections The time indication on the digital display starts blinking and the time The time of the analog section cannot be adjusted directly. becomes adjustable. Set the time of the area you want to indicate in the analog section once in the 4. Press and release the upper right button A repeatedly to digital section and then switch the time between the analog and digital sections. change the target to be set. 1. Press and release the lower right button M repeatedly to • Each time you press the button, the target changes as follows: move the mode hand to point to [TME] or [CAL]. 2. Press and release the upper right button A and lower left button C at the same time. PM PM PM PM The time of the digital and analog (hour/minute/24-hour hands) sections switches. Summer time Second Minute Hour 12/24-hour basis 5. Press and release the lower left button C to adjust the target. • Press button C in accordance with a reliable time source to adjust the second. • Pressing and holding the button changes indication continuously. • “AM” or “PM” is displayed to indicate AM or PM in 12-hour basis indication. • “SUMMER” is displayed when summer time is activate. • Summer time cannot be activated when “UTC” is chosen for the area. 6. Repeat steps 4 and 5 to set other targets. 7. Push in the lower right button M to finish the procedure. C300 Abbreviated instruction Using the world time Correcting the reference position 1. Press and release the lower right button M repeatedly to 1. Press and release the lower right button M repeatedly to move the mode hand to point to [TME] or [CAL]. move the mode hand to point to [CHR]. The calendar is indicated on the digital display when you choose [CAL]. 2. Pull out the lower right button M. MHP 2. Press and release the upper right button A or lower left The reference position becomes adjustable. button C repeatedly to indicate an area name you want on Correct reference positions: 22 24 2 All hands (except the mode hand: 20 4 the digital display. 18 6 12 o'clock position (straight above) 16 UTC 8 14 10 The time or calendar of the area you choose is indicated on the digital 12 display. 3. Press and release the upper left button 24 20 4 B repeatedly to change the target to PM AM Table of time zones and representative areas 8 be adjust. 16 • The time zone in the table is based on UTC (Coordinated Universal Time). • Countries or regions may change time zones for various reasons. • Each time you press the button, the target changes and digital indication changes as follows: Time Area name Representative area Time Area name Representative area UTC hour/minute hands (UTC) → hour and 24-hour hands (H.R.) → minute zone zone hand (MIN) → (back to the top) UTC Coordinated Universal +9 TYO Tokyo 4. Press and release the upper right button A or lower left 0 Time +10 SYD Sydney LON button C to adjust the target. London +11 NOU Noumea PAR Paris • Pressing and holding the button move the hands continuously. +1 +12 AKL Auckland ROM Rome –10 HNL Honolulu 5. Repeat steps 3 and 4 to adjust other targets. CAI Cairo +2 –9 ANC Anchorage 6. Push in the lower right button M to finish the procedure. IST Istanbul –8 LAX Los Angeles MOW Moscow +3 –7 DEN Denver Resetting the watch - All Reset KWI Kuwait CHI Chicago +4 DXB –6 M Dubai MEX Mexico City 1. Pull out the lower right button . +5 KHI Karachi NYC New York 2. Press buttons A, B and C at the same time. +5.5 DEL –5 New Delhi YUL Montreal All the digital indication lights up and the watch is reset. +6 DAC Dhaka –4 CCS Caracas +7 BKK After All Reset Bangkok RIO Rio de Janeiro SIN Singapore –3 The watch changes into reference position adjustment status by pressing button BUE Buenos Aires B B +8 HKG Hong Kong . After pressing button , adjust the reference positions referring to steps 3 - Correcting the reference position BJS Beijing 6 of . After the adjustment, set the time and calendar. Using the zone-set function You can hide unnecessary ones in the 30 areas and UTC, which the watch can indicate the time of; you can also activate/deactivate summer time for those areas separately. 1. Press and release the lower right button M repeatedly to move the mode hand to point to [SET]. 2. Pull out the lower right button M. The digital display starts blinking. 3. Press and release the upper right button A repeatedly to indicate an area name you want on the digital display. 4. Press and release the upper left button B to select “SET” (display) or “OFF” (hide) of the area. • Each time you press the button, “SET” and “OFF” changes alternately. • Each time you press button C in this step, the summer time setting changes alternately. 5. Repeat steps 3 and 4 to set other areas. 6. Push in the lower right button M to finish the procedure..
Load more

Recommended publications
  • Type II Familial Synpolydactyly: Report on Two Families with an Emphasis on Variations of Expression
    European Journal of Human Genetics (2011) 19, 112–114 & 2011 Macmillan Publishers Limited All rights reserved 1018-4813/11 www.nature.com/ejhg SHORT REPORT Type II familial synpolydactyly: report on two families with an emphasis on variations of expression Mohammad M Al-Qattan*,1 Type II familial synpolydactyly is rare and is known to have variable expression. However, no previous papers have attempted to review these variations. The aim of this paper was to review these variations and show several of these variable expressions in two families. The classic features of type II familial synpolydactyly are bilateral synpolydactyly of the third web spaces of the hands and bilateral synpolydactyly of the fourth web spaces of the feet. Several members of the two families reported in this paper showed the following variations: the third web spaces of the hands showing syndactyly without the polydactyly, normal feet, concurrent polydactyly of the little finger, concurrent clinodactyly of the little finger and the ‘homozygous’ phenotype. It was concluded that variable expressions of type II familial synpolydactyly are common and awareness of such variations is important to clinicians. European Journal of Human Genetics (2011) 19, 112–114; doi:10.1038/ejhg.2010.127; published online 18 August 2010 Keywords: type II familial syndactyly; inherited synpolydactyly; variations of expression INTRODUCTION CASE REPORTS Type II familial synpolydactyly is rare and it has been reported in o30 The first family families.1–12 It is characterized by bilateral synpolydactyly of the third The family had a history of synpolydactyly type II for several web spaces of the hands and bilateral synpolydactyly of the fourth web generations on the mother’s side (Table 1).
    [Show full text]
  • Stauer Swiss Tactical Chronograph
    WATCH DISPLAY TIMESETTING USING THE CHRONOGRAPH CHRONOGRAPH RESET A. TO SET THE TIME TO SET THE CHRONOGRAPH Chronograph Reset (includes after 1. Pull the crown (part C) out to position “2” This chronograph is able to measure and replacing the battery) B. G. and rotate it to the desired time. display time in 1 second increments up to a 1. Pull the crown (part C) out to position “2”. 2. Once the correct time is set, push the maximum of 59 minutes (part F) and 2. Press the Start/Stop Button (part B) to set 12 C. crown back into “0” (zero) position. The 59 seconds (part G). the Chronograph Second Hand (part F) to the 0 1 2 30 60 Seconds Dial (part A) will start to run. zero position. The chronograph hand can be 1. To start the Chronograph feature, press advanced rapidly by continuously pressing the the Start/Stop Button (part B). To measure 20 10 40 20 TO SET THE DATE Start/Stop Button (part B). split times press the Split/Reset Button (part 20 1. Pull the crown (part C) out to posi- 3. Once the Chronograph Second Hand (part D) to stop counting. tion “1” and rotate it clockwise (away from you) G) has been set to the zero position, push the to the desired date (part E). 2. Press the Split/Reset Button (part D) to F. 6 crown (part C) back into “0” (zero) position. D. 2. Once the correct date is set, push the crown reset the chronograph, and the Chronograph Minute Dial (part F) and the Chronograph To reset the Chronograph Minute (part H) E.
    [Show full text]
  • Circular Motion Review KEY 1. Define Or Explain the Following: A
    Circular Motion Review KEY 1. Define or explain the following: a. Frequency The number of times that an object moves around a circle in a given period of time. b. Period The amount of time needed for an object to move once around a circular path. c. Hertz The standard unit of frequency. 1 cycle/second (or 1 revolution per second) d. Centripetal Force The centrally directed force that causes an object’s tangential velocity to change direction as it moves around a circle. e. Centrifugal Force The imaginary outward force which you feel as you go around a turn in a car. This “force” is a consequence of you being accelerating and your brain interpreting your tendency to move in a straight line as a force. 2. Which of the following is NOT a property of Centripetal Force? a. It is unbalanced b. It always has a real source c. It is directed outward from the center of the circle d. Its magnitude is proportional to mass e. Its magnitude is proportional to the square of speed f. Its magnitude is inversely proportional to the radius of the circle g. It is the amount of force required to turn a particular object in a particular circle 3. If an object is swung by a string in a vertical circle, explain two reasons why the string is most likely to break at the bottom of the circle. 1. The string tension needs to overcome the weight of the object to provide the needed centripetal force. 2. The object is moving the fastest at the bottom unless some force keeps the object at a constant speed as it moves around the circle.
    [Show full text]
  • Emerald Observatory Is an Ipad™ Application Which Displays a Variety of Astronomical Information
    Emerald Observatory is an iPad™ application which displays a variety of astronomical information. It is similar in that way to our flagship products, Emerald Chronometer® and Emerald Chronometer HD, but designed from the start to take advantage of the iPad's larger display. Much of the supporting technology, including NTP (atomic time) and the highly accurate astronomical algorithms, was derived from Emerald Chronometer. Clock First of all, it's an ordinary clock. The main hands (gold colored) display the hours, minutes and seconds in the usual 12-hour format. To read it more precisely use the small numbers and tick marks on the inner edge of the rings. The thin central hand with the large white arrow head and the large white numbers and tick marks indicate the time in 24-hour format (with noon on top by default). Emerald Observatory's time may not exactly match the time in the iPad's status bar becausethe iPad's clock is often not very accurate whereas Emerald Observatory's time is synchronized with the international standard atomic clocks. This is usually accurate to about +/- 0.100 seconds. This is accomplished with the Network Time Protocol (NTP) so it must have a Net connection to get a sync. If the Net is not available, it will fall back to the internal clock's value. It is also possible to change the clock's time and to animate it at very high rates. See Set Mode, below. Moon In the upper left Emerald Observatory displays the Moon as it appears from the current location at the clock's time.
    [Show full text]
  • Display Crown Operation How to Set Date How to Set Time
    Display Day hand Hour hand Minute hand N → 1 → 2 Crown 24 hour hand Second hand Date hand Crown operation Crown position N : normal 1 : 1st click 2 : 2nd click Turn counterclockwise Time setting Crown Free for date change (Day change) How to set time and day of the week (1) Pull the crown out to the 2nd click position when the second hand is at the 12 o'clock position. (2) Turn the crown clockwise to advance the hour and minute hands until the day hand is set to the desired day of the week. - The day hand will not move back by turning the crown counterclockwise. - To advance the day hand quickly, turn back the hour and minute hands 4 to 5 hours beyond the point of the day change (between 11:00 p.m. and 4:00 a.m.), and then advance them again until the day hand is set to the next. (3) Turn the crown to set the hour and minute hands. Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time. - The 24 hour hand moves correspondingly with the hour hand. - When setting the hour hand, check that the 24 hour hand is correctly set. - When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact time. (4) Push the crown back to the normal position. How to set date (1) Pull the crown out to the 1st click position. (2) Turn the crown counterclockwise to set the date hand.
    [Show full text]
  • Clinician Position in Relation to the Treatment Area
    © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION MODULE 2 © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALEClinician OR DISTRIBUTION Position inNOT Relation FOR SALE OR DISTRIBUTION to the Treatment Area © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALEModule OR DISTRIBUTION Overview NOT FOR SALE OR DISTRIBUTION The manner in which the seated clinician is positioned in relation to a treatment area is known as the clock position. This module introduces the traditional clock positions for periodontal instrumentation. © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTIONModule Outline NOT FOR SALE OR DISTRIBUTION Section 1 Clock Positions for Instrumentation 41 Section 2 Positioning for the RIGHT-Handed Clinician 43 © Jones & BartlettSkill Building. Learning, Clock LLCPositions for the RIGHT-Handed© JonesClinician, & p. Bartlett 43 Learning, LLC NOT FOR SALEFlow OR Chart: DISTRIBUTION Sequence for Practicing Patient/ClinicianNOT Position FOR SALE OR DISTRIBUTION Use of Textbook during Skill Practice Quick Start Guide to the Anterior Sextants, p. 47 Skill Building. Clock Positions for the Anterior Surfaces Toward, p. 48 © Jones & Bartlett Learning,Skill LLC Building. Clock Positions for© the Jones Anterior & SurfacesBartlett Away, Learning, p. 49 LLC Quick Start Guide to the Posterior Sextants, p. 50 NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION Skill Building. Clock Positions for the Posterior Sextants, Aspects Facing Toward the Clinician, p. 51 Skill Building. Clock Positions for the Posterior Sextants, Aspects Facing Away From the Clinician, p. 52 © Jones & Bartlett Learning, LLC Reference Sheet:© Position Jones for & the Bartlett RIGHT-Handed Learning, Clinician LLC NOT FOR SALE OR DISTRIBUTIONSection 3 PositioningNOT for theFOR LEFT-Handed SALE OR DISTRIBUTION Clinician 54 Skill Building.
    [Show full text]
  • The Digital Rectal Examination
    Expert Review The Digital Rectal Examination Anna Shirley* and Simon Brewster# …………………………………………………………………………………………………………………………………….. The Journal of Clinical Examination 2011 (11): 1-12 Abstract Digital rectal examination is an important skill for medical students and doctors. This article presents a comprehensive, concise and evidence-based approach to examination of the rectum which is consistent with The Principles of Clinical Examination [1]. We describe the signs of common and important diseases of the rectum and, based on a review of the literature, the precision and accuracy of these signs is discussed. Word Count: 2893 Key Words: digital rectal examination, rectum, anus Address for Correspondence: [email protected] Author affiliations: *Foundation Year 1 Doctor, Charring Cross Hospital, London. #Clinical Director of Urology, Oxford Radcliffe Hospitals NHS Trust. …………………………………………………………………………………………………………………………………….. Introduction examination early in a medical career. The value of The importance of performing a digital rectal learning how to perform the DRE is increasingly examination (DRE) in the appropriate setting is being recognised across UK medical schools, and captured by the phrase, “If you don’t put your finger rectal examination mannequins are now used in in it, you put your foot in it.” – H. Bailey 1973 [2]. student training and beyond. They may also be Anorectal or urogenital symptoms account for 5- used to assess the skill in Objective Structured 10% of all general practice consultations [3] and the Clinical Examinations. DRE is part of the assessment of these. In addition, statistics from 2008 show that colorectal and The Context of the DRE prostate cancer were the third and forth most There are many circumstances in which a DRE is commonly diagnosed cancers in the UK considered to be appropriate.
    [Show full text]
  • Operation Guide 4391
    MA0702-EA Operation Guide 4391 I For a watch with an elapsed time bezel Rotate the elapsed time bezel to align the mark with the 10 Setting the Time and Day 0 minute hand. 5 Your watch lets you set two different times: one time with the hour and minute hands, After certain amount of time elapsed, read the graduation on 20 and another time with the 12-hour and 24-hour hands. 40 the elapsed time bezel which the minute hand points to. 30 The elapsed time is indicated. <Time with the hour and <Time with the 12-hour and minute hands (Dual Time)> 24-hour hands (Basic Time)> Elapsed time bezel Hour hand Minute hand 24-hour hand • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. 30 30 12-hour hand The time indicated by the hour hand and minute hand (Dual Time) can be set to the time you want without stopping watch operation. You can set the 12-hour and 24-hour hands to your basic time (the current time in the time zone where you normally use the watch), and change the hour hand to any other time (Dual Time) you want (current time in a city you are visiting, etc.).
    [Show full text]
  • Discovering Actual Wall Thickness on a 12 Inch Pipe in BC
    North American Society for Trenchless Technology (NASTT) NASTT’s 2014 No-Dig Show Orlando, Florida April 13-17, 2014 TM1-T1-01 Discovering Actual Wall-Thickness in a 12–inch Steel Pipe in British Columbia, a 22-hour Journey William Jappy, PICA Corporation Martin, Korz, PICA Corporation John Kohut, BC Hydro 1. ABSTRACT In April 2013, PICA Corporation inspected a 300mm Steel bitumen lined steel pipe for BC Hydro in Port Moody, BC. The inspection was 6.8 km in length and done in 22 consecutive hours. Although the inspection was performed in one day, three days were required on-site to complete the assessment. Prior to commencement BC Hydro employed a local cleaning company to pig the line. PICA Corporation was selected by BC Hydro for our patented Remote Field Testing (RFT) technique which would allow BC Hydro to determine the actual remaining wall-thickness. The paper presents the results and verification of the inspection and the benefits of actual wall-thickness as opposed to average wall-thickness and leak detection. PICA concluded that this line has significant holes, areas of pitting and graphitization were identified and through a subsequent verification our results were confirmed by an Ultra Sonic Testing Gauge with their exact location on the pipeline and clock position. 2. INTRODUCTION In November 2012, PICA was contacted by John Kohut and Bonifacio “Boni” dela Cruz from BC Hydro due to concerns regarding the status of their intake-line. They had observed some leaks and were interested how many there were and if they were any “leaks in waiting” so they opted for a “full-line” condition assessment was initially recommended for the 300mm pipeline.
    [Show full text]
  • Hidden Truth Brought Forth by Time
    Hidden Truth brought forth by Time A description of some of the profound truths portrayed by and hidden in the emblem on the first edition title page of Francis Bacon’s New Atlantis. Author: Peter Dawkins Woodblock emblem on the title-page of Francis Modern colour rendition of same. Bacon’s New Atlantis, bound and published together with Sylva Sylvarum, 1st edition 1626 and 2nd edition 1627, printed in London by J. Haviland for W. Lee. The emblem on the title page of the first edition (1627) of Francis Bacon’s New Atlantis depicts Time in the form of Pan drawing forth Truth in the form of a naked but crowned woman from a cave. Time holds a scythe in his right hand, whilst he grasps Truth’s left wrist with his left hand. At his feet and standing upright between them is an hourglass. A rose is at the 6 o’clock position, beneath Time’s left foot and above the “RS” signature, which itself suggests a rose by means of its intertwining letters. The Latin motto in the circular border reads “Tempore Patet Occulta Veritas”, which translates as “[The] Hidden Truth brought forth by Time”.1 Foundation Stone and Zodiac The illustration is constructed on a hidden geometric template comprising, basically, a square and circle, with the circle inscribed within the square. This is a geometric portrayal of squaring the circle—one of several ways of doing so—that represents the marriage of heaven (the circle) and earth (the square). “In the beginning God made heaven and earth.” (Genesis 1:1.) This is symbolic of what is known as The Foundation Stone in sacred tradition, the forming of which is accomplished by the cubing of a sphere (i.e.
    [Show full text]
  • Operation Guide 5266
    MO1207-EB © 2012 CASIO COMPUTER CO., LTD. Operation Guide 5266 ENGLISH Congratulations upon your selection of this CASIO watch. Warning ! • The measurement functions built into this watch are not intended for taking measurements that require professional or industrial precision. Values produced by this watch should be considered as reasonable representations only. • Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered by you or any third party arising through the use of this product or its malfunction. • To ensure correct direction readings by this watch, be sure to perform bidirectional calibration before using it. The watch may produce incorrect direction readings if you do not perform bidirectional calibration. For more information, see “To perform bidirectional calibration” (page E-24). • Keep the watch away from audio speakers, magnetic necklace, cell phone, and other devices that generate strong magnetism. Exposure to strong magnetism can magnetize the watch and cause incorrect direction readings. If incorrect readings continue even after you perform bidirectional calibration, it could mean that your watch has been magnetized. If this happens, contact your original retailer or an authorized CASIO Service Center. E-1 About This Manual Things to check before using the watch • Depending on the model of your watch, digital display text appears 1. Check the Home City and the daylight saving time (DST) setting. either as dark fi gures on a light background, or light fi gures on a dark background. All sample displays in this manual are shown Use the procedure under “To confi gure Home City settings” (page E-12) to confi gure your Home using dark fi gures on a light background.
    [Show full text]
  • The History of Life 347 DO NOT EDIT--Changes Must Be Made Through “File Info” Correctionkey=A
    DO NOT EDIT--Changes must be made through “File info” CorrectionKey=A The History CHAPTER 12 of Life BIg IdEa Scientists use many types of data collection and experimentation to form hypotheses and theories about how life formed on Earth. 12.1 The Fossil Record 12.2 The geologic Time Scale 12.3 Origin of Life 9d 12.4 Early Single-Celled Organisms 7F, 7g, 11C data analysis CalcuLaTINg axes IntervaLS 2g 12.5 Radiation of Multicellular Life 7E 12.6 Primate Evolution Online BiOlOgy HMDScience.com ONLINE Labs ■■ Video Lab Model of Rock Strata ■■ Radioactive Decay ■■ QuickLab Geologic Clock ■■ Stride Inferences ■■ Understanding Geologic Time ■■ Comparing Indexes Among Primates ■■ Virtual Lab Comparing Hominoid Skulls (t) ©Silkeborg Denmark Museum, 346 Unit 4: Evolution DO NOT EDIT--Changes must be made through “File info” CorrectionKey=A Q What can fossils teach us about the past? This man, known only as Tollund Man, died about 2200 years ago in what is now Denmark. Details such as his skin and hair were preserved by the acid of the bog in which he was found. A bog is a type of wetland that accumulates peat, the deposits of dead plant material. older remains from bogs can add information to the fossil record, which tends to consist mostly of hard shells, teeth, and bones. RE a d IN g T o o L b o x This reading tool can help you learn the material in the following pages. uSINg LaNGUAGE YOuR TuRN describing Time Certain words and phrases can help Read the sentences below, and write the specific time you get an idea of a past event’s time frame (when it markers.
    [Show full text]