Circular tooling 2019 EN blanks

CERATIZIT is a high-tech engineering group specialised in tooling and hard material technologies.

Tooling the Future

www.ceratizit.com 2 CIRCULAR TOOLING BLANKS CIRCULAR TOOLING BLANKS 3

The right blank for every cut

Requirements for hard metal materials are very Standard programme and custom-made high in the precision tooling industry. Our tooling products blanks guarantee a long tool life, good parallelism and reliable concentricity. Thanks to Our E-Techstore offers a direct look into our our wide range of grades, we offer the optimal standard programme, including inventory, and solution for every application. further simplifies the ordering process. Outside of this programme, we can additionally produce Perfectly prepared to your needs nearly any dimension – whether it’s a blank or a pre-ground disk. During our creation of the tooling blanks we place great value on your ability to further We have developed the intuitive configurator tool process the products efficiently with marginal GO2.0 on our E-Techstore, where you will be effort: we guarantee precise finishes with low able to configure your non-standard blanks incl. tolerances, a repeatable flatness as well as low features in a few clicks. grinding allowances. If you wish to have access, please contact our Customer Service.

Dr Michael Droeschel, R&D Manager As we manage the entire process chain, we can always guarantee top quality and smooth collaboration.

HARD MATERIAL SOLUTIONS BY CERATIZIT www.ceratizit.com www.ceratizit.com HARD MATERIAL SOLUTIONS BY CERATIZIT 4 CIRCULAR TOOLING BLANKS CIRCULAR TOOLING BLANKS 5

Our grades

Advantages Our top-quality and established standard Because we are able to offer the entire process carbide grade CTS14Y shows reproducible chain from a single source – from production cutting qualities and proofed very resistant to of raw materials and mineral ores wear in several applications and materials, such through the composition of the powder and as machining grey cast iron, tempered iron, continuous improvement of the carbide powder non-alloyed steels, super alloys, titanium and and its processing – we can guarantee you & benefits tantalum alloys, copper, graphite, aluminium supreme quality at all times. and others.

Other grades for special applications are available on request.

Type Grade ISO code U.S. Avg. Grain Hardness Transverse Fracture code code HV10 HV30 HRA rupture strength toughness [MPa] [Mpa.m1/2]

Advantages Benefits Standard CTS14Y K10-K20 C3 submicron 1720 1690 92.5 2500 8.7 Grade Thanks to CERATIZIT you can manage the Excellent product quality precisely adapted Special CTS12D K05-K15 C3 submicron 1800 1770 92.9 3700 8.8 entire process chain, from the raw material to your needs, maximum process reliability and Grades to the finished product holistic expertise CTS18D K20-40 C2 submicron 1610 1590 91.9 3800 11

CTS20D K20-40 C2 submicron 1620 1600 91.9 4000 10.4 Carbide grades with an optimal ratio of hardness Minimal wear and long service life and reduced and fracture toughness costs mean higher productivity CTF24E >K40 C11/ fine 1330 1320 89.7 3000 12 C12

Broad selection, also for proven corrosion-resistant Always the right individual solution for every Please note: the information given here is for illustrative purposes only, and does not constitute either a specification or a representation. carbide grades application

Technical advice on site: our people have Support for every challenge and innovation, the technical knowledge to support you rapid response when needed Your partner to find Targeted recommendation of the most suitable Tool life optimisation, increase in productivity grade the most suitable solution

Widest range of corrosion-resistant grades Individual grade selection for the largest available on the market application range in the fields of stamping, At CERATIZIT, we aim to treat our customers as CERATIZIT’s supreme experience of working bending, blanking and forming operations privileged partners and guide them in developing with carbide, production experts on the ground new products or improving existing ones. and our dedicated engineering team are Consistent quality High productivity and repeatability the guarantee of your future success! Thanks to our engineering expertise and Profound knowledge of applications Optimisation of processes and tool life project management capacities, we can design innovative carbide solutions to meet the specific Homogeneous structure and minimised porosity, Repeatability and high-quality and precise requirements of your product. also for larger dimensions working results

Metallurgical analyses in the CERATIZIT Group Additional technical support in the field of application optimisation and development

HARD MATERIAL SOLUTIONS BY CERATIZIT www.ceratizit.com www.ceratizit.com HARD MATERIAL SOLUTIONS BY CERATIZIT 6 CIRCULAR TOOLING BLANKS CIRCULAR TOOLING BLANKS 7

Standard Programme ØD Applications Blanks sizes, Grade CTS14Y

Ød s Our circular saw blades are specially designed - Metal D [mm] D Tol. [mm] d [mm] d Tol. [mm] s [mm] s Tol. [mm] Material number for cutting tools manufacturers. They can be - Plastic used for cutting the following material types, - Cardboard 15.3 +0.25 4.8 -0.15 0.8 +0.15 11065827 among others: - Wood 15.3 +0.25 4.8 -0.15 1.1 +0.15 11065838 - Composite material 15.3 +0.25 4.8 -0.15 1.3 +0.15 11065839

15.3 +0.25 4.8 -0.15 1.5 +0.15 11598161

15.3 +0.25 4.8 -0.15 1.8 +0.15 11088142

20.5 +0.3 4.8 -0.15 0.8 +0.15 11065766

20.5 +0.3 4.8 -0.15 1 +0.15 11458873

20.5 +0.3 4.8 -0.15 1.3 +0.15 11065780

20.5 +0.3 4.8 -0.15 1.5 +0.15 11035241

20.5 +0.3 4.8 -0.15 1.8 +0.15 11065785

20.5 +0.3 4.8 -0.15 2.3 +0.15 11065787

20.5 +0.3 4.8 -0.15 2.8 +0.15 11065790

20.5 +0.3 4.8 -0.15 3.3 +0.15 11088144

25.5 +0.35 7.7 -0.25 0.8 +0.15 11739393

25.5 +0.35 7.7 -0.25 1 +0.15 11888021

25.5 +0.35 7.7 -0.25 1.3 +0.15 12615251

25.5 +0.35 7.7 -0.25 1.6 +0.15 12615253

25.5 +0.35 7.7 -0.25 1.8 +0.15 11888022

25.5 +0.35 7.7 -0.25 2.3 +0.15 11831186 Products 25.5 +0.35 7.7 -0.25 2.6 +0.15 12615255 30.5 +0.4 7.7 -0.25 0.8 +0.15 11055386 Hard Material Solutions by CERATIZIT offers a wide range of standard and customized circular hard 30.5 +0.4 7.7 -0.25 1 +0.15 11213084 metal discs from Ø8mm up to Ø400mm. Our team of experts helps you finding the optimum solution for your application and our catalogue provides common sizes of blanks from stock. 30.5 +0.4 7.7 -0.25 1.2 +0.15 11600659 30.5 +0.4 7.7 -0.25 1.5 +0.15 11035063 Our products benefit from the following properties of tungsten carbide: 30.5 +0.4 7.7 -0.25 1.8 +0.15 11055399 AA High wear resistance AA Good machining properties 30.5 +0.4 7.7 -0.25 2.3 +0.15 11055403 AA Fracture toughness 30.5 +0.4 7.7 -0.25 2.8 +0.15 11066421 A A Good parallelism and concentricity 30.5 +0.4 7.7 -0.25 3.1 +0.15 11016415

The following executions are possible, among others: 30.5 +0.4 7.7 -0.25 3.6 +0.15 11055406 AA As sintered with low grinding allowance (“near net shape” technology) 30.5 +0.4 7.7 -0.25 4.6 +0.15 11035159

AA Pre-ground (thickness, bore, OD, eroded keyway) 32.5 +0.45 7.7 -0.25 0.8 +0.15 11090462 AA Additional features possible: keyways, holes, preformed teeth, chamfers, grooves 32.5 +0.45 7.7 -0.25 1 +0.15 11147118

32.5 +0.45 7.7 -0.25 1.3 +0.15 11066459

32.5 +0.45 7.7 -0.25 1.6 +0.15 11065329

32.5 +0.45 7.7 -0.25 2.3 +0.15 11600466

32.5 +0.45 7.7 -0.25 3.3 +0.15 11056377

40.5 +0.45 7.7 -0.25 0.8 +0.15 11232569

HARD MATERIAL SOLUTIONS BY CERATIZIT www.ceratizit.com www.ceratizit.com HARD MATERIAL SOLUTIONS BY CERATIZIT 8 CIRCULAR TOOLING BLANKS CIRCULAR TOOLING BLANKS 9

D [mm] D Tol. [mm] d [mm] d Tol. [mm] s [mm] s Tol. [mm] Material number D [mm] D Tol. [mm] d [mm] d Tol. [mm] s [mm] s Tol. [mm] Material number

40.5 +0.45 7.7 -0.25 1.3 +0.15 11412224 80.5 +0.85 15.7 -0.30 1.8 +0.15 11054482

40.5 +0.45 7.7 -0.25 1.6 +0.15 11035685 80.5 +0.85 21.7 -0.30 0.8 +0.15 11200761

40.5 +0.45 9.7 -0.25 0.8 +0.15 11055216 80.5 +0.85 21.7 -0.30 1.1 +0.15 11016441

40.5 +0.45 9.7 -0.25 1 +0.15 11242361 80.5 +0.85 21.7 -0.30 1.3 +0.15 11035999

40.5 +0.45 9.7 -0.25 1.3 +0.15 363063 80.5 +0.85 21.7 -0.30 1.5 +0.15 11035042

40.5 +0.45 9.7 -0.25 1.8 +0.15 11055296 80.5 +0.85 21.7 -0.30 1.8 +0.15 11010572

40.5 +0.45 9.7 -0.25 2.1 +0.15 11016428 80.5 +0.85 21.7 -0.30 2.3 +0.15 368859

40.5 +0.45 9.7 -0.25 2.3 +0.15 11055379 80.5 +0.85 21.7 -0.30 2.8 +0.15 11009639

40.5 +0.45 9.7 -0.25 3.3 +0.15 11055382 80.5 +0.85 21.7 -0.30 3.3 +0.15 11035641

40.5 +0.45 9.7 -0.25 4.6 +0.15 11055383 80.5 +0.85 21.7 -0.30 4.3 +0.15 11035659

40.5 +0.45 9.7 -0.25 6.6 +0.15 11055385 80.5 +0.85 21.7 -0.30 4.6 +0.15 11035441

50.5 +0.55 12.7 -0.25 0.8 +0.15 11054967 80.5 +0.85 21.7 -0.30 5.3 +0.15 11591983

50.5 +0.55 12.7 -0.25 1.1 +0.15 11054980 90.5 +1.00 21.7 -0.30 0.8 +0.15 11609700

50.5 +0.55 12.7 -0.25 1.3 +0.15 11011908 90.5 +1.00 21.7 -0.30 1.4 +0.15 11088284

50.5 +0.55 12.7 -0.25 1.5 +0.15 11035060 90.5 +1.00 21.7 -0.30 1.7 +0.15 11132665

50.5 +0.55 12.7 -0.25 1.8 +0.15 11035219 100.5 +1.10 21.7 -0.30 0.8 +0.15 11596182

50.5 +0.55 12.7 -0.25 2.1 +0.15 11035221 100.5 +1.10 21.7 -0.30 1 +0.15 11159487

50.5 +0.55 12.7 -0.25 2.6 +0.15 11016434 100.5 +1.10 21.7 -0.30 1.1 +0.15 11033420

50.5 +0.55 12.7 -0.25 2.8 +0.15 11035256 100.5 +1.10 21.7 -0.30 1.3 +0.15 11035645

50.5 +0.55 12.7 -0.25 3.3 +0.15 11066458 100.5 +1.10 21.7 -0.30 1.8 +0.15 11054438

50.5 +0.55 12.7 -0.25 3.6 +0.15 11038330 100.5 +1.10 21.7 -0.30 2.3 +0.15 11054469

50.5 +0.55 12.7 -0.25 4.3 +0.15 11593046 100.5 +1.10 21.7 -0.30 2.8 +0.15 11054471

50.5 +0.55 12.7 -0.25 5.3 +0.15 11597420 100.5 +1.10 21.7 -0.30 3.3 +0.15 11011925

63.5 +0.75 15.7 -0.30 0.8 +0.15 11016436 100.5 +1.10 21.7 -0.30 4.3 +0.15 11390534

63.5 +0.75 15.7 -0.30 1 +0.15 11011917 100.5 +1.10 21.7 -0.30 5.3 +0.15 11598720

63.5 +0.75 15.7 -0.30 1.3 +0.15 11011918 125.5 +1.40 21.7 -0.30 1 +0.2 11246975

63.5 +0.75 15.7 -0.30 1.5 +0.15 11035283 125.5 +1.40 21.7 -0.30 1.1 +0.2 11141396

63.5 +0.75 15.7 -0.30 1.8 +0.15 11011915 125.5 +1.40 21.7 -0.30 1.2 +0.2 11142583 63.5 +0.75 15.7 -0.30 2.3 +0.15 11035647 125.5 +1.40 21.7 -0.30 1.3 +0.2 11197545 63.5 +0.75 15.7 -0.30 2.8 +0.15 11035308 125.5 +1.40 21.7 -0.30 1.8 +0.2 11142586 63.5 +0.75 15.7 -0.30 3.3 +0.15 11035658 125.5 +1.40 21.7 -0.30 2.2 +0.2 11011585 63.5 +0.75 15.7 -0.30 3.8 +0.15 11035312 125.5 +1.40 21.7 -0.30 2.8 +0.2 11096111 63.5 +0.75 15.7 -0.30 4.3 +0.15 11035644 125.5 +1.40 21.7 -0.30 3.3 +0.2 11592775 63.5 +0.75 21.7 -0.30 1.3 +0.15 11054512 160.5 +2.20 31.7 -0.60 1.3 +0.2 11624700 63.5 +0.75 21.7 -0.30 2.1 +0.15 11054516 160.5 +2.20 31.7 -0.60 1.5 +0.2 11146212 63.5 +0.75 21.7 -0.30 3.6 +0.15 11054527 160.5 +2.20 31.7 -0.60 2.3 +0.2 11597113 63.5 +0.75 21.7 -0.30 6.3 +0.15 11594125 200.5 +2.80 31.7 -0.60 1.3 +0.2 11600533 63.5 +0.75 21.7 -0.30 8.3 +0.15 11591587 200.5 +2.80 31.7 -0.60 1.5 +0.2 11625203 80.5 +0.85 15.7 -0.30 0.8 +0.15 11680374 200.5 +2.80 31.7 -0.60 1.8 +0.2 11012518 80.5 +0.85 15.7 -0.30 1.1 +0.15 11054477

80.5 +0.85 15.7 -0.30 1.3 +0.15 11054478 Weitere Abmessungen, sowie HM-Qualitäten auf Anfrage lieferbar!

HARD MATERIAL SOLUTIONS BY CERATIZIT www.ceratizit.com www.ceratizit.com HARD MATERIAL SOLUTIONS BY CERATIZIT 10 CIRCULAR TOOLING BLANKS CIRCULAR TOOLING BLANKS 11

Hard Material Solutions CERATIZIT Group

For over 95 years, CERATIZIT has been a includes the subsidiaries KOMET, WNT, Becker by CERATIZIT pioneer developing exceptional hard material Diamantwerkzeuge, and Stadler Metalle, as well products for cutting tools and wear protection. as the joint venture CB-CERATIZIT. As a leader wear protection for all applications The privately owned company, based in Mamer, in materials technology, we continuously invest in , develops and manufactures highly research and development and hold over 1,000 and industries specialised carbide cutting tools, inserts and patents. Our innovative carbide solutions are rods made of hard materials as well as wear used in mechanical engineering and tool con- parts. We are the market leader in several wear struction and many other industries including the AAIndividual carbide AATools for metal forming AAHigh-performance part application areas, and successfully develop automotive, aerospace, oil and medical sectors. solutions for your components for tool new types of carbide, cermet and ceramic application construction grades which are used for instance in the wood We are active on the market through the seven and stone working industry. competence brands Hard Material Solutions by CERATIZIT, Toolmaker Solutions by CERATIZIT, With over 9,000 employees at 34 production Tool Solutions by CERATIZIT as well as Cutting sites and a sales network of over 70 branch Solutions by CERATIZIT, KOMET, WNT and Extract from our offices, the Group is a global player in the KLENK. carbide industry. Our international network also product portfolio

2016.V1 EN 2016.V1 EN 2016.V1 EN 2017.V1 EN 2018 EN Specialist for Solutions for Water-jet Hob milling customised the tool and cutting with cemented Premium Facts and figures blanks and semi- die industry Carbide carbide products for finished products focusing tubes the oil and gas industry

CERATIZIT is a high-tech engineering group CERATIZIT is a high-tech engineering CERATIZIT is a high-tech engineering CERATIZIT is a high-tech engineering CERATIZIT is a high-tech engineering group specialised in tooling and hard material group in tooling and hard materials technology. group in tooling and hard materials technology. group in tooling and hard materials technology. specialized in tooling and hard material technologies. technologies.

Tooling the Future. Tooling the Future. Tooling the Future. Tooling the Future Tooling the Future 1 headquarters 33 > 45 www.ceratizit.com www.ceratizit.com www.ceratizit.com www.ceratizit.com www.ceratizit.com Mamer / Luxembourg production sites sales subsidiaries

2017.V1 EN 2017.V1 EN 2017.V1 EN 2017.V1 EN 2019 EN Carbide Drawing Tools & Premium blanks Premium products Solutions for the tools for the Drawing Nibs for rotary cutters for injection fastening technology food industry industry

CERATIZIT is a high-tech engineering CERATIZIT is a high-tech engineering group CERATIZIT is a high-tech engineering group CERATIZIT is a high-tech engineering group CERATIZIT is a high-tech engineering group groupspecialised in tooling and hard specialized in tooling and hard material technologies. specialized in tooling and hard material technologies. specialized in tooling and hard material technologies. specialized in tooling and hard material technologies. material technologies.

Tooling the Future Tooling the Future. Tooling the Future Tooling the Future > 9,000 > 100,000 > 1,000 www.ceratizit.com www.ceratizit.com www.ceratizit.com www.ceratizit.com employees different products patents and utility models

2017.V1 EN 2017.V1 EN 2018.V1 EN 2018 EN Solutions for the Premium hot rolls 2018 EN High-pressure tools Premium carbide Premium material for the plastics industry made of cemented for synthesising health industry carbide and ceramic silicon nitride diamond/PCD and PCBN

CERATIZIT is a high-tech engineering group CERATIZIT is a high-tech engineering CERATIZIT is a high-tech engineering group CERATIZIT is a high-tech engineering group CERATIZIT is a high-tech engineering group specialised in tooling and hard material group specialised in tooling and hard material specialized in tooling and hard material technologies. specialized in tooling and hard material technologies. specialised in tooling and hard material technologies. technologies. technologies. > 200 > 10 > 30% Tooling the Future Tooling the Future Tooling the Future Tooling the Future www.ceratizit.com www.ceratizit.com www.ceratizit.com www.ceratizit.com employees in R&D innovation awards new products created in the last 5 years

HARD MATERIAL SOLUTIONS BY CERATIZIT www.ceratizit.com www.ceratizit.com HARD MATERIAL SOLUTIONS BY CERATIZIT Headquarters

CERATIZIT S.A. LU-8232 Mamer T. +352 31 20 85-1 E. [email protected] www.ceratizit.com

Italy CERATIZIT Como S.p.A. IT-22040 Alserio (CO) Austria T. +39 031 6349 211 CERATIZIT Austria GmbH E. [email protected] AT-6600 Reutte Great Britain T. +43 5672 200-0 CERATIZIT UK Ltd. Mexico E. [email protected] UK-Sheffield S9 1XU CERATIZIT México, S.A. de C.V. Toll Free 0800 048 4877 / 4878 MX-76040 Querétaro, QRO T. +44 1925 261 161 T. +52 442 225 9173 CERATIZIT América Latina Ltda. E. [email protected] E. [email protected] Campinas, São Paulo 13069-310 T. +55 19 3115 9500 Netherlands E. [email protected] CERATIZIT Office Hungary CERATIZIT Nederland B.V. HU-1138 Budapest NL-4707 AT Roosendaal T. +36 1 437 0930 T. +31 165 55 08 00 CERATIZIT Bulgaria AG E. [email protected] E. [email protected] BG-5301 Gabrovo T. +359 66 812 206 India E. [email protected] CERATIZIT India Pvt. Ltd. CERATIZIT Office Poland IN-Bengaluru 560099 PL-30-443 Kraków China T. +91 80 4043 1262 T. +48 12 252 8591 CB-CERATIZIT Tianjin E. [email protected] E. [email protected] CN-300384 Tianjin T. +86 22 5810 7000 CERATIZIT India Pvt. Ltd. / Portugal IN-Chennai 600037 CERATIZIT Ibérica Herramientas de /Slovak Republic T. +91 44 4269 4350 Precisión S.L. CERATIZIT Office Czech Republic E. [email protected] ES-28660 Boadilla del Monte CZ-594 01 Velké Meziříčí (Madrid) T. +420 566 520 341 CERATIZIT India Pvt. Ltd. T. +34 91 351 0609 E. [email protected] IN-Coimbatore 641009 E. [email protected] T. +91 4224 273 373 France/Luxembourg/Belgium E. [email protected] Switzerland CERATIZIT Luxembourg S.à r.l. CERATIZIT Schweiz AG LU-8232 Mamer CERATIZIT India Pvt. Ltd. CH-Orpund 2552 T. +352 31 20 85-1 IN-Gurgaon 122002 T. +41 32 344 93 93 E. [email protected] T. +91 124 4018 481 E. [email protected] Taiwan Germany CB-CERATIZIT Tamsui CERATIZIT Empfingen GmbH CERATIZIT India Pvt. Ltd. TW-25152-Tamsui DE-72186 Empfingen IN-Pune 411018 T. +886 2 2622 1668 T. +49 7485 99802 0 T. +91 20 6529 0628 E. [email protected] E. [email protected] USA / Canada CERATIZIT USA, Inc. CERATIZIT Hitzacker GmbH Indonesia US-Warren, MI 48089-1833 DE-29456 Hitzacker CB-CERATIZIT Indonesia Toll free +1-800-783-2280 T. +49 5862 969 100 ID-17530 Bekasi T. +1-586-759-2280 E. [email protected] T. +62-21-2961-2351 E. [email protected] 7003540 MA-PRO-0768-EN-05/19